POLYFUSE Resettable PTCs Surface Mount > 2920L Series
|
|
- Wilfrid Conley
- 5 years ago
- Views:
Transcription
1 Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER E R lead-free currents Applications protection (IEEE af) control module protection equipment protection Electrical Characteristics Part Number Marking I trip V max (Vdc) I max P d max. (W) Maximum Time To Trip Current Time (Sec.) R min (Ω) Resistance R typ (Ω) R 1max (Ω) Agency Approvals 2920L030 LF X X 2920L050 LF X X 2920L075 LF X X 2920L100 LF X X 2920L125 LF X X 2920L150 LF X X 2920L185 LF X X 2920L200 LF X X 2920L200/24 LF X X 2920L250 LF X X 2920L260 LF X X 2920L300 LF X X 2920L300/15 LF X X = Hold current: maximum current device will pass without tripping in 20 C still air. I trip = Trip current: minimum current at which the device will trip in 20 C still air. V max = Maximum voltage device can withstand without damage at rated current (I max) I max = Maximum fault current device can withstand without damage at rated voltage (V max ) P d = Power dissipated from device when in the tripped state at 20 C still air. R min = Minimum resistance of device in initial (un-soldered) state. R typ = Typical resistance of device in initial (un-soldered) state. R 1max = Maximum resistance of device at 20 C measured one hour after tripping or reflow soldering of 260 C for 20 sec. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame Littelfuse, Inc. Revised: October 24, 2008
2 Surface Mount > Temperature Rerating Ambient Operation Temperature -40 C -20 C 0 C 23 C 40 C 50 C 60 C 70 C 85 C Part Number Hold Current 2920L L L L L L L L L200/ L L L L300/ Average Time Current Curves Temperature Rerating Curve A 0.30A 0.50A 0.75A 1.00A 1.25A 1.50A 1.85A 2.00A/24V 2.00A 2.50A 2.60A 3.00A/15V 3.00A 2920L Percentage of Rated Current 170% 150% 130% 110% 90% 70% 50% % Time in Seconds % Temperature ( C) Current in Amperes The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. Revised: October 24, Littelfuse, Inc.
3 Surface Mount > Soldering Parameters Condition Reflow Peak Temp/ Duration Time Time above liquids (TAL) 220 C Preheat 120 C~ 180 C Storage Condition 260 C / 10 Sec 60 Sec ~ 100 Sec 50 Sec ~ 150 Sec 0 C~35 C, < =70%RH oven, N 2 environment for lead free solvents. Note: If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements. Physical Specifications Temperature ( C) Preheating 50 to 150 Soldering 60 to 100 Time(s) Environmental Specifications 120 Cooling Terminal Material Solder-Plated Copper (Solder Material: Matte Tin(Sn)) Operating/Storage Temperature -40 C to +85 C Lead Solderability Meets EIA Specification RS186-9E, ANSI/ J-STD-002 Category 3. Maximum Device Surface Temperature in Tripped State 125 C Passive Aging +85 C, 1000 hours -/+5% typical resistance change Humidity Aging +85 C, 85%,R.H.,1000 hours -/+5% typical resistance change Thermal Shock MIL-STD-20 2, Method 107G +85 C/-40 C 20 times -30% typical resistance change Solvent Resistance MIL STD 202, Method 215 Vibration MIL STD 883C, Method , Condition A Moisture Sensitivity Level Level 2, J STD 020C 2008 Littelfuse, Inc. Revised: October 24, 2008
4 Surface Mount > Dimensions (mm) MARKING CODE VARIES WITH AMPERAGE AND VOLTAGE RATING (SEE ELECTRICAL CHARACTERISTIC TABLE) SHOWN ARE: - 1.5A/33V RATING (LEFT) - 2.0A/24V RATING (RIGHT) A C Top View 150 B Side View Bottom View 150 Pad Layout 4.60 mm (.181 ) 5.30 mm (.209 ) D E 2.0mm (.079 ) A B C D E Part Number Inches mm Inches mm Inches mm Inches mm Inches mm Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Min. Min Max. Min. Max. 2920L L L L L L L L L200/ L L L L300/ Revised: October 24, Littelfuse, Inc.
5 Surface Mount > Part Ordering Number System 2920 L 200 /24 D R PACKAGING STYLE R: Tape & Reel SERIES QUANTITY CODE: D=1500 P=2000 /XX: SPECIAL VOLTAGE RATING (NOT APPLICABLE TO ALL PARTS) I HOLD CURRENT CODE (SEE TABLE BELOW) L: LITTELFUSE SURFACE MOUNT PPTC Packaging SIZE Part Number Ordering Number Code Voltage Option Packaging Option Quantity Quantity & Packaging Codes 2920L L030DR Tape and Reel 1500 DR 2920L L050DR Tape and Reel 1500 DR 2920L L075DR Tape and Reel 1500 DR 2920L L100PR Tape and Reel 2000 PR 2920L L125PR Tape and Reel 2000 PR 2920L L150DR Tape and Reel 1500 DR 2920L L185DR Tape and Reel 1500 DR 2920L L200DR Tape and Reel 1500 DR 2920L200/ L200/24DR /24 Tape and Reel 1500 DR 2920L L250DR Tape and Reel 1500 DR 2920L L260PR Tape and Reel 2000 PR 2920L L300DR Tape and Reel 1500 DR 2920L300/ L300/15DR /15 Tape and Reel 1500 DR 2008 Littelfuse, Inc. Revised: October 24, 2008
6 Surface Mount > Tape and Reel Specifications TAPE SPECIFICATIONS: EIA (mm) 2920L030, 2920L050, 2920L L100, 2920L125, 2920L L150, 2920L185, 2920L200, 2920L250, 2920L200/24, 2920L300, 2920L300/15 REEL DIMENSIONS: EIA (mm) W 16.0+/ / / H 16.0+/- 0.2 F 7.5+/ / / W 13.2+/- 1.5 E / / / D Ø 60.2+/ 0.5 D / / / F Ø 13.0+/- 0.5 D / / / C Ø 178+/- 1.0 P / / / H 1 11+/- 0.5 P / / / W P / / / W A / / / W B / / / T 0.25+/ / / K O 1.25+/ / / Leader min Trailer min Tape and Reel Diagram P 1 P 0 D 0 P 2 E 1 H W2 F W W1 H 1 D C W3 T D 2 W A 0 K 0 B0 Revised: October 24, Littelfuse, Inc.
2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationPOLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description
2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationFeatures. V max (Vdc) I max (A) typ. (W) P d
2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationFeatures. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B
RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
More informationPOLY-FUSE Resettable PTCs Surface Mount > 1206L Series
Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
More informationSurface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)
1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationSurface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)
1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationSurface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationFeatures. Samples. I max (A) P d. typ. (W)
0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationPositive Temperature Coefficient (PTC) Data Sheet
Positive Temperature Coefficient (PTC) Data Sheet Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable
More informationLow profile Fast response to fault current Compatible with high temperature solders
Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable for ultra portable applications where space
More informationRadial Leaded > 72R Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
72R Series RoHS * Description The 72R Series is designed to provide overcurrent protection to 72Vdc maximum voltage with a maximum 40A short circuit rating. Features 72Vdc max voltage w/max 40A short circuit
More informationFeatures 60R010X & 60R017X. P d typ. (W) I max (A) V max (Vdc)
60R Series RoHS * Description The 60R Series radial leaded device is designed to provide overcurrent protection for ( 60V) applications where space is not a concern and resettable protection is preferred.
More informationRadial Leaded > 16R Series. Description. Features. Applications. Additional Information. Datasheet. Maximum Time To Trip Current (A) P d typ.
16R Series RoHS Description Littelfuse 16R Series Radial Leaded PTCs are designed to provide resettable overcurrent protection serving a wide range of electronics applications. With maximum 16 volts and
More informationLow profile Fast response to fault current Compatible with high temperature solders
Description The 1206 series provides miniature surface mount overcurrent protection with holding current from 0.12A to 2.0A. This series is suitable for wide range of applications in modern electronics
More informationFast response to fault current. Pd typ (W) Imax (A)
Description The 1812 series provides surface mount resettable overcurrent protection with holding current from 0.1A to 3.0A. This series offers complete portfolio in terms of holding current and working
More informationPOLY-FUSE Resettable PTCs Radial Leaded > 250R Series
Radial Leaded > Description The is designed to protect against short duration high voltage fault currents (power cross or power induction surge) typically found in telecom applications (250Vrms). The series
More informationPolySwitch Resettable PTCs Surface Mount > LoRho Series. Low Rho SMD Series. Description
Low Rho SMD Series Description PolySwitch low resistivity SMD (surface-mount device) is a versatile device well suited for general applications which have space-constrained, low power dissipation and high
More informationSurface Mount > 250S Series. Description. Features. Applications. Customer Premises Equipment (CPE) Central Office (CO)/ telecom centers.
POLY-US Resettable PTs 250S Series RoS escription The 250S igh Voltage Radial device is a Polymer-based PT suitable to protect telephony equipment against lightining and power cross strikes. The 250S Series
More informationFast response to fault current. General electronics. Maximum Time To Trip Current (A) Pd typ (W) Imax (A)
Description The 1812 series provides surface mount resettable overcurrent protection with holding current from 0.1A to 3.0A. This series offers complete portfolio in terms of holding current and working
More informationSurface Mountable PTC Resettable Fuse: JK-mSMD Series
Surface Mountable PTC Resettable Fuse: Features: RoHS Compliant & Halogen Free faster tripping, 1812 Dimension, Surface mountable, Solid state Operation Current: 0.10A~3.50A Maximum Voltage: 6V~60Vdc Operating
More informationSurface Mountable PTC Resettable Fuse: JK-SMD0805 Series
Surface Mountable PTC Resettable Fuse: Features: RoHS Compliant & Halogen Free faster tripping, 0805 Dimension, Surface mountable, Solid state Operation Current: 0.05A~1.10A Maximum Voltage: 6V~15Vdc Operating
More informationLow profile Fast response to fault current Compatible with high temperature solders
Description The 1206 series provides miniature surface mount overcurrent protection with holding current from 0.05A to 2.0A. This series is suitable for wide range of applications in modern electronics
More informationFeatures. P d max. (W) V max (Vdc) I max (A)
POLY-FUSE Resettable PTs Radial Leaded > USR Series USR Series RoHS escription The USR Series radial leaded device is designed to provide overcurrent protection for US applications where space is not a
More informationRadial Leaded > 250R Series. Description. Features. Applications. Customer Premises Equipment (CPE) Central Office (CO)/ telecom centers
250R Series RoHS * Description The 250R Series is designed to protect against short duration high voltage fault currents (power cross or power induction surge) typically found in telecom applications (250Vrms).
More informationTablet PC Automotive applications Printer Security systems VOP (V) Ibreak (A)
Description Current Limiting Module (CLM) is a chip type surface mountable device that can protect against both overcurrent and overcharging. It comprises a fuse element to ensure stable operation under
More informationFUZETEC TECHNOLOGY CO., LTD.
NO. PQ18-01ER Product Specification and Approval Sheet Version A9 Page 1/5 Surface Mountable PTC Resettable Fuse: FSMD1206 Series 1. Summary (a) RoHS Compliant & Halogen Free (b) Applications: All high-density
More informationComputer Game machines Automotive Portable electronics Telephony and broadband Industrial controls Multimedia Mobile phones Battery
LP-ISM series Features Very small size of 0805 Fast tripping resettable circuit protection Surface mount packaging for automated assembly Agency recognition: UL CSA TUV Applications: Computer Game machines
More informationFeatures. P d typ. (W) I max (A)
250R Series RoHS * Description The 250R Series is designed to protect against short duration high voltage fault currents (power cross or power induction surge) typically found in telecom applications (250Vrms).
More informationLP-ISM(L) Series. Features. Product Dimensions. Agency recognition: UL CSA TUV. Small size of Fast tripping resettable circuit protection
LP-ISM(L) Series Surface-mount devices Features Small size of 0805 Fast tripping resettable circuit protection Surface mount packaging for automated assembly Agency recognition: UL CSA TUV Product Dimensions
More informationPLED Ultra Low Holding Current Series
RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching
More informationCC06H High I 2 t Chip 0603 size fuses
Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth
More informationFSMD Page 8-12
OVERVIEW FRX... Page 2-4 FRU... Page 5-7 FSMD 2920... Page 8-12 FSMD 1210... Page 13-15 FSMD 1206... Page 16-18 FSMD 0805... Page 19-21 3 1 Radial Leaded PTC Resettable Fuse : FRX Series 1. Summary (a)
More informationA16 Series PTC Devices
PROUT TSHEET Series PT evices Series PT evices escription JTFUSE Series Radial Leaded PTs are designed to provide resettable overcurrent protection serving a wide range of electronics applications. With
More informationMF-PSMF Series - PTC Resettable Fuses
*RoHS COMPLIANT Features Compact design to save board space - 0805 footprint Small size results in very fast time to react to fault events Symmetrical design Low profile RoHS compliant* and halogen free**
More informationPRODUCT CATALOG & DESIGN GUIDE
PRODUCT CATALOG & DESIGN GUIDE Positive Temperature Coefficent (PTC) Thermistor Products TABLE OF CONTENTS Series Name Specifications, are descriptions subject to and change illustrative without material
More informationNTC Thermistor for Automotive: TSM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. Operating temperature range: -50 ~ +150 3. Superior stability in high-temperature and high-humidity environment 4. RoHS & Halogen Free (HF) compliant
More informationRadial Leaded PTC Resettable Fuse : FRX F
Radial Leaded PTC Resettable Fuse : FRX 050-60F 1. Summary (a) RoHS Compliant (Lead Free) Product (b) Applications: Wide variety of electronic equipment (c) Product Features: Low hold current, Solid state,
More information6125FF Fast-acting subminiature fuses
Fast-acting subminiature fuses Supersedes March 2015 Applications Power supplies Servers LED/LCD televisions Appliances and white goods LCD monitor/backlight inverters Laptops and notebooks Agency information
More informationAxial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series
229/ 2AG, Slo-Blo Fuse with Indicating Option PS E Description Agency Approvals Agency Agency File Number Ampere Range E10480 250mA - 3.5A LR 29862 250mA - 7A E10480 4A - 7A Littelfuse 229/230 series Slo-Blo
More informationn For use in telecommunication circuit applications requiring low current protection with high surge tolerance
*RoHS COMPLIANT & **HALOGEN FREE 0.5 SinglFuse SF-3812TM-T Series Features n Replacement for Bourns Telefuse models B0500T, B1250T and B2000T n For use in telecommunication circuit applications requiring
More informationSensitive Triacs. Description. Features. 10Amps. Applications. Schematic Symbol. Symbol Parameter Value Unit = 50 C SOT-223 T L TO-92 T C
Description New 1Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking junctions are
More informationPTC Thermistor for Automotive:TPM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code
More informationNo. Test Requirement Test Condition Test Reference. 10 cycles
*RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and
More informationAxial Lead & Cartridge Fuses 5 20 mm > Time-Lag > 215 Series
5 20 mm > Time-Lag >, 5 x 20 mm, Time-Lag (Slo-Blo ) Fuse Description 5x20mm Time-Lag surge withstand ceramic body cartridge fuse designed IC specification Features International (IC ) Standards for use
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
More information0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M
*RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250
More informationPTC Thermistor for Automotive:TPM-C Series
SMD PTC Thermistor for Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics
More informationTransient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T
SMTO-218-6 ka > LTKAK6 series LTKAK6 Series RoHS Pb e3 Description The LTKAK6 series offers superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology,
More informationSinglFuse SF-1206HIxxxM Series Features
E SinglFuse SF-1206HIxxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High inrush current withstand fuse n UL 248-14 listed n RoHS compliant* and halogen
More informationSpecification Status: Released
PAGE NO.: 1 OF 7 Termination Material: Copper, Ni, Tin Fuse Element: Copper/Copper alloy Body Material: Fiberglass/Epoxy Operating Temperature -55 C to +125 C (with de-rating) Specification Status: Released
More informationSinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics
*RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed
More informationAutomotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
More informationDear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955
Littelfuse, Inc. 8755 West Higgins Road, Suite 5 Chicago, IL 6631 USA (773) 628-1 7.1,218 RE: LFPCN41214 From: Littelfuse Product Management Team Dear Customer, Please be aware that Littelfuse is discontinuing
More informationSPHV-C Series 200W Discrete Bidirectional TVS Diode
SPHV-C Series W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SPHV-C series is designed to replace multilayer varistors (MLVs) in portable applications, LED lighting modules, and low speed
More informationFeatures. Samples. Units Continous: Steady State Applied Voltage: DC Voltage Range (VM(DC)) 150 to 970 V AC Voltage Range (V M(AC)RMS
S 34S Varistor Series RoHS Description The Littelfuse S 34S thermally protected varistor is a self-protected device. It consists of a 34mm square varistor with an integral thermal designed to open in the
More informationMF-R/250 Series - Telecom PTC Resettable Fuses
TV Rheinland Features Radial Leaded Devices High ability to withstand lightning surges Ideal lightning surge coordination device Binned and sorted narrow resistance ranges available Lead free option available
More informationGas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series
Description Littelfuse highly reliable GDTs provide a high degree of surge protection in a small size ideal for board level circuit protection. GDTs function as switches which dissipate a minimum amount
More informationGas Discharge Tubes SL1002A Series
SL12A Series SL12A Series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Additional Information Description The Broadband Optimized SL12A series has been especially
More informationSFRX Polymer PTC Thermistor SFRX ROHS
Polymer PTC Thermistor ROHS Features Radial leaded devices;;; Quick trip time Low parasitic capacitance, flat impedance with frequency. RoHS compliant. Resettable. Design for lead free solder termination.
More informationSF-0603SP150M SF-0603SP200M SF-0603SP250M
E SinglFuse SF-0603SPxxxM Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Time Lag fuse n UL 248-14 listed n RoHS compliant* and halogen free** n Multilayer
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1)
SIDACtor Series - DO-214 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides
More informationS505SCH 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses
Technical Data 10401 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED lighting LED/LCD televisions Appliances
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description
SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series
More informationSPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES
SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES Table F1 Environmental Specifications for Table F2 Fuses Operating Temperature Mechanical Vibration
More information0.15 +/ (0.006" +/ ) / (0.033" +/ ) / (0.088" +/ ") 1.91 (0.075") 1.09 (0.043") 0.91 (0.
Note: For wave solder, increase the spacing in both the horizontal Surface Mount Polymeric.66 and Electrostatic +/- vertical.6 dimensions by Discharge Suppressors.54 (.") where denoted by an asterisk (*).4
More informationPolymer PTC Resettable Fuse: KRG Series
Polymer PTC Resettable Fuse: KRG Series 6V/16V Lead Type Features 1. RoHS & HF compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Current ratings from
More informationCPTC Thermistor:TPM-P Type
CPTC Thermistor:TPM-P Type Features 1. RoHS & Halogen-free compliant 2. EIA size 63,85,121 3. Suitable for reflow soldering 4. Suitable for over-current or short circuit protection 5. Agency Recognition:
More informationLgD Series Global Pro-tection Fuses 600 Volts AC Time Delay Amperes
LgD Series Global Pro-tection Fuses 0 Volts AC Time Delay - -00 Amperes The Global Pro system is designed to save valuable space in a crowded panel while providing designers with the flexibility of a universally
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Features... 2 Applications... 2 Approvals... 2 Part Marking... 3 System... 4 Absolute Ratings... 4 Fuse Configuration and Dimensions... 5 Specifications...
More informationSpecification Status: Released
PAGE NO.: 1 of 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More informationSpecification Status: Released
PAGE NO.: 1 OF 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More information3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810
1 of 9 3M Connector System 0.050" x 0.100" Pitch 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 Product Specification 78-5110-0074-0 Released: 10-1-10 2 of 9
More informationC308F 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications
Technical Data 4405 Supersedes October 2017 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications Agency information curus Recognition file number: E19180, Guide JDYX2/JDYX8 Applications
More informationAQHV Series 200W Discrete Unidirectional TVS Diode
AQHV Series W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The AQHV series is designed to provide an option for very fast acting, high performance over-voltage protection devices. Ideally
More informationSpecification Status: Released
PAGE NO.: 1 OF 9 Specification Status: Released GENERAL DESCRIPTION Littelfuse PolyZen devices are polymer enhanced, precision Zener diode microassemblies. They offer resettable protection against multi-watt
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationSpecification Status: Released
PAGE NO.: OF 8 Specification Status: Released GENERAL DESCRIPTION Littelfuse PolyZen devices are polymer enhanced, precision Zener diode microassemblies. They offer resettable protection against multi-watt
More informationThin Film Anti-Sulfurated Chip Resistor (TAS Series)
(TAS Series) Features - Special materials, design, and processing for high sulfur applications - Tolerances as low as 0.05% and s as low as 10 ppm. - Test proven immunity to humidity, moisture, and sulfur
More informationWW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive)
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) *Contents in this sheet are subject to change without prior notice. Page
More informationTeccor brand Thyristors Standard Bidirectional SIDACs
Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance
More informationMetal Alloy Low-Resistance Resistor Specifications
Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More informationNTC Thermistor:TSM Series
Features 1. RoHS & HF compliant 2. EIA size: 0201, 0402, 0603, 0805 3. Highly reliable structure 4. Operating temperature range: -40 ~ +125 5. Wide resistance range 6. Cost effective 7. Agency recognition:
More informationCRS-A Series High Power Anti-Surge Resistor
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*
More informationSurface Mount Fuses 0603Size> Fast Acting > S0603-F Series
Page:1 of 6 General Fast Acting 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity RoHS
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & ANTI-SULFURATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RMNW K HTS-1 /3 Date: 217. 4. 21 Data sheet : ANTI-SULFURATION RMNW1,16,2,32,35 AEC-Q2 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock conditions Temperature: +5 C +35 C Relative
More informationTemperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature
More informationCYG Wayon Circuit Protection CO., LTD.
CATALOG (2014) CYG Wayon Circuit Protection CO., LTD. CONTENTS Surface Mount Fuses 1206F Series. 2 0603F Series.5 1206S Series.8 0603S Series.11 Applications..14 Product Identification...14 Reliability
More informationS J
1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on
More informationSM24CANB Series 500W TVS Diode Array
SM4CANB Series 5W TVS Diode Array RoHS Pb GREEN Description The SM4CANB TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge (ESD,
More informationNTC Thermistor:TTC05 Series
Features 1. RoHS compliant 2. Halogen-Free (HF) series are available 3. Body size: Ф5mm 4. Radial lead resin coated 5. Operating temperature range: -30 ~+125 6. Wide resistance range 7. Cost effective
More informationEngineering Product Specification C310T-SC Series Ceramic tube, Time delay
Engineering Product Specification C310T-SC Series Ceramic tube, Time delay Printed on: 4/14/2015 Page 2 of 14 Technical Specification Approvals Functional Area Engineering Manager Product Manger Signature(s)
More informationPOLYSWITCH RESETTABLE DEVICES Automotive Devices
POLYSWIT RSTTL VIS utomotive evices We have provided PPT resettable devices for the automotive industry for over 25 years. With the advent of TS16949 and our continued involvement in the automotive industry,
More informationMulti-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
More informationBi-Directional Coupler
Bi-Directional Coupler DC Pass, High Power 50Ω 30dB Coupling 200W 225 to 450 MHz The Big Deal High power handling, up to 200W High directivity, 28 db Low insertion loss, 0.15 db Product Overview Mini-Circuits
More informationSurface Mount Fuses 0603Size> Slow Blow> S0603-S Series
Revision:F Page:1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series
MLA Automotive Varistor Series RoHS Description The MLA Automotive Series of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are
More information