SM24CANB Series 500W TVS Diode Array
|
|
- Aldous Crawford
- 6 years ago
- Views:
Transcription
1 SM4CANB Series 5W TVS Diode Array RoHS Pb GREEN Description The SM4CANB TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge (ESD, electrical fast transient (EFT, and other overvoltage transients. The SM4CANB Series can absorb repetitive ESD strikes above the maximum level specified in the IEC 6-4- international standard without performance degradation and safely dissipate A of 8/µs surge current (IEC nd Edition with very low clamping voltages. Pinout and Functional Block Diagram Features Pin Pin ESD, IEC 6-4-, ±kv contact, ±kv air EFT, IEC 6-4-4,5A (5/5ns RoHS compliant and Lead-free Lightning, IEC nd edition, A (tp=8/μs Low clamping voltage Low leakage current AEC-Q qualified Moisture Sensitivity Level (MSL- Functional Block Diagram Pin Applications CAN Bus Protection Automotive Networks On-Board Diagnostics Sensors, Actuators EnergyBus Industrial Control Networks Device Net Safety BUS CAN open Application Example SPLIT Additional Information CANH CAN BUS Transceiver R T/ CAN BUS Datasheet Resources Samples Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. CANL Common Mode Choke (optional C G R T/ SM4CANB-HTG (5W 7 Littelfuse, Inc. Revision: /9/7
2 Absolute Maximum Ratings Symbol Parameter Value Units P Pk Peak Pulse Power (t p =8/μs 5 W Peak Pulse Current (t p =8/μs. A T OP Operating Temperature -4 to 5 C T STOR Storage Temperature -55 to 5 C Notes: CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (T OP =5ºC Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V RWM I R μa, Pin or Pin to Pin 4. V Reverse Breakdown Voltage V BR I T =ma, Pin or Pin to Pin 6.7 V Leakage Current I LEAK V R =4V, Pin or Pin to Pin. μa Clamp Voltage V C =8A, t p =8/µs, Pin or Pin to Pin 46. V I =A, t PP =8/µs, Pin or Pin to Pin p 4. V =A, t p =8/µs, Pin or Pin to Pin 5 V Dynamic Resistance R DYN TLP, t P =ns, Pin or Pin to Pin.6 Ω ESD Withstand Voltage V ESD IEC 6-4- (Contact Discharge ± kv IEC 6-4- (Air Discharge ± kv Diode Capacitance C I/O-GND Reverse Bias=V, f=mhz; Pin or Pin to Pin Note: Parameter is guaranteed by design and/or device characterization. Transmission Line Pulse (TLP test setting : Std.TDR(5Ω,tp=ns, tr=.ns ITLP and VTLP averaging window: star t=7ns to end t=8ns pf Pulse Waveform Capacitance vs. Reverse Bias (Pin or Pin to Pin % 5. % 9% 4. 8% Percent of 7% 6% 5% 4% Capacitance (pf.. % %. % % Time (μs Bias Voltage (V 7 Littelfuse, Inc. Revision: /9/7
3 Temperature TVS Diode Arrays (SPA Diodes Clamping Voltage vs. Peak Pulse Current (Pin or Pin to Pin Transmission Line Pulsing (TLP Plot (Pinor Pin to Pin Clamp Voltage (V C 4 TLP Current (A Peak Pulse Current -IPP (A 4 5 TLP Volts (V Soldering Parameters Reflow Condition - Temperature Min (T s(min 5 C Pb Free assembly T P Ramp-up t P Critical Zone TL to TP Pre Heat - Temperature Max (T s(max C - Time (min to max (t s 6 8 secs Average ramp up rate (Liquidus Temp (T L to peak T S(max to T L - Ramp-up Rate C/second max C/second max T L T S(max T S(min t S Preheat t L Ramp-down Reflow - Temperature (T L (Liquidus 7 C - Temperature (t L 6 5 seconds 5 time to peak temperature Time Peak Temperature (T P 6 +/-5 C Time within 5 C of actual peak Temperature (t p 4 seconds Ramp-down Rate 6 C/second max Time 5 C to peak Temperature (T P 8 minutes Max. Do not exceed 6 C 7 Littelfuse, Inc. Revision: /9/7
4 Part Marking System M4CB Part Numbering System TVS Diode Arrays (SPA Diodes Series Working Voltage CAN BUS Wattage B: 5W SM 4 CAN B H T G G= Green T= Tape & Reel Package H: SOT- Number of Channels Part Number Package Marking Min. Order Qty. Packaging Option P/P Packaging Specification SM4CANB-HTG SOT- M4CB Tape & Reel 8mm tape/7 reel 4mm/4mm EIA RS-48 Package Dimensions SOT- E A C b 5B e e D E A L E A Recommended Pad Layout P M P N Package SOT- Pins JEDEC TO-6 Millimeters Inches Min Max Min Max A M A b..5.. c N D E E e.95 BSC.8 BSC e.9 BSC.75 BSC L.54 REF. REF M.9.9 N.95.8 O.78.TYP P.78.TYP 7 Littelfuse, Inc. Revision: /9/7 4
5 Embossed Carrier Tape & Reel Specification SOT- ACCESS HOLE 4.4mm mm 8mm 6mm 8mm TAPE AND REEL GENERAL INFORMATION. PIECES PER REEL.. ORDER IN MULTIPLES OF FULL REELS ONLY.. MEETS EIA-48 REVISION "A" SPECIFICATIONS. SOT- (8mm POCKET PITCH Symbol Millimetres Inches Min Max Min Max E F P D P W P A B K t mm USER DIRECTION OF FEED PIN COVER TAPE Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at 7 Littelfuse, Inc. Revision: /9/7 5
SM Series 400W TVS Diode Array
General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic
More informationAQHV Series 200W Discrete Unidirectional TVS Diode
AQHV Series W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The AQHV series is designed to provide an option for very fast acting, high performance over-voltage protection devices. Ideally
More informationSPHV-C Series 200W Discrete Bidirectional TVS Diode
SPHV-C Series W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SPHV-C series is designed to replace multilayer varistors (MLVs) in portable applications, LED lighting modules, and low speed
More informationAQxxC Series 450W Discrete Bidirectional TVS Diode
AQxxC Series 5W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More informationTVS Diode Arrays (SPA Diodes) SP2502L Series 3.3V 75A Diode Array. Lightning Surge Protection - SP2502L Series. RoHS Pb GREEN.
SP202L Series 3.3V 7A Diode Array RoHS Pb GREEN Description The SP202L provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationGas Discharge Tubes SL1002A Series
SL12A Series SL12A Series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Additional Information Description The Broadband Optimized SL12A series has been especially
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description
SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series
More informationTransient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T
SMTO-218-6 ka > LTKAK6 series LTKAK6 Series RoHS Pb e3 Description The LTKAK6 series offers superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology,
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1)
SIDACtor Series - DO-214 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series
MLA Automotive Varistor Series RoHS Description The MLA Automotive Series of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are
More informationPLED Ultra Low Holding Current Series
RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching
More informationDear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955
Littelfuse, Inc. 8755 West Higgins Road, Suite 5 Chicago, IL 6631 USA (773) 628-1 7.1,218 RE: LFPCN41214 From: Littelfuse Product Management Team Dear Customer, Please be aware that Littelfuse is discontinuing
More informationGas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series
Description Littelfuse highly reliable GDTs provide a high degree of surge protection in a small size ideal for board level circuit protection. GDTs function as switches which dissipate a minimum amount
More information0.15 +/ (0.006" +/ ) / (0.033" +/ ) / (0.088" +/ ") 1.91 (0.075") 1.09 (0.043") 0.91 (0.
Note: For wave solder, increase the spacing in both the horizontal Surface Mount Polymeric.66 and Electrostatic +/- vertical.6 dimensions by Discharge Suppressors.54 (.") where denoted by an asterisk (*).4
More information1SMA10CAT3G Series, SZ1SMA10CAT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Bidirectional
110CAT3G Series, SZ110CAT3G Series 400 Watt Peak Power Zener Transient Voltage Suppressors Bidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationPOLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description
2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationCHIPSESD DEVICES BENEFITS APPLICATIONS FEATURES
CHIPSES EVICES Littelfuse s ChipSES family of Silicon ES devices, available in EIA-0201 and EIA-0402 sized rectangular SMT passive component packages, can help protect electronic circuits against damage
More informationFeatures. Samples. I max (A) P d. typ. (W)
0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationFeatures. V max (Vdc) I max (A) typ. (W) P d
2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationSpecification Status: Released
PAGE NO.: 1 OF 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More informationSurface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationFeatures. Continuous AUML Series Units. ) 1.5 to 25 J Jump Start Capability (5 minutes), (V JUMP. ) 48 V Operating Ambient Temperature Range (T A
AUML Varistor Series RoHS Description The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most
More informationSpecification Status: Released
PAGE NO.: 1 of 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More informationSubject: TVS Diode LKTAK series alternative assembly line approval
April 13th, 2017 RE: LFPCN41259 To: Our Valued Customers. From: Littelfuse Product Management Team Subject: TVS Diode LKTAK series alternative assembly line approval In order to support growing demand,
More informationSensitive Triacs. Description. Features. 10Amps. Applications. Schematic Symbol. Symbol Parameter Value Unit = 50 C SOT-223 T L TO-92 T C
Description New 1Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking junctions are
More informationSurface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)
1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationSurface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)
1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationLSIC2SD065C06A 650 V, 6 A SiC Schottky Barrier Diode
LSICSD065C06A 650 V, 6 A SiC Schottky Barrier Diode Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Transient Suppression Diodes............................................................ 1 General Information...........................................................................
More informationTeccor brand Thyristors Standard Bidirectional SIDACs
Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance
More informationGlass Encapsulated SMD Varistor MLV
(VJ12, 2, 13, 14, 15, 32) Transient Voltage Suppression, ESD Protection Devices & EMI Devices GENERAL DESCRIPTION AVX s Professional Multilayer Varistors include 3 series of glass coated products as listed
More informationS J
1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V
More information1.5KE SERIES Taiwan Semiconductor
Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 1500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from 0 volt
More informationFeatures. Samples. Units Continous: Steady State Applied Voltage: DC Voltage Range (VM(DC)) 150 to 970 V AC Voltage Range (V M(AC)RMS
S 34S Varistor Series RoHS Description The Littelfuse S 34S thermally protected varistor is a self-protected device. It consists of a 34mm square varistor with an integral thermal designed to open in the
More informationDescription. Features. Applications. Environmental. Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage V RRM.
LSIC2SD12C1, 12 V, 1 A, TO-252-2L (DPAK) LSIC2SD12C1 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
More informationSpezifikation für Freigabe / specification for release
Datum / Date : 2007-01-24 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SISE W L T a 402 0.5 1.0 0.6 0.25 603 0.8 1.6 0.9 0.3 805 1.25 2.0 1.2 0.3 1206 1.6 3.2 1.5 0.5 1210 2.5 3.2 1.5 0.5
More informationSFI Electronics Technology
1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V
More informationGEN2 SiC Schottky Diode. Description. SiC Schottky Diode. Features. Applications. Environmental
GEN2 LSIC2SD12A8, LSIC2SD12C8, 12 V, 8 A, A, TO-252-2L TO-22-2L(DPAK) LSIC2SD12C8 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Transient Suppression Diodes... 1 General Information... 2 P4KE Series 400 Watt... 8 SA Series 500 Watt... 12 P6KE Series 600 Watt... 18 1.5KE
More informationAUML Varistor Series. Surface Mount Varistors
The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most common transient condition results from
More informationSpecification Status: Released
PAGE NO.: 1 OF 9 Specification Status: Released GENERAL DESCRIPTION Littelfuse PolyZen devices are polymer enhanced, precision Zener diode microassemblies. They offer resettable protection against multi-watt
More informationLSIC2SD065A20A 650 V, 20 A SiC Schottky Barrier Diode
LSIC2SD065A20A 650 V, 20 A SiC Schottky Barrier Diode RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
More informationLSIC2SD065E40CCA 650 V, 40 A SiC Schottky Barrier Diode
LSIC2SD065E40CCA 650 V, 40 A SiC Schottky Barrier Diode RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
More informationPolySwitch Resettable PTCs Surface Mount > LoRho Series. Low Rho SMD Series. Description
Low Rho SMD Series Description PolySwitch low resistivity SMD (surface-mount device) is a versatile device well suited for general applications which have space-constrained, low power dissipation and high
More informationLSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET
LSIC1MO120E0160 1200 N-channel, Enhancement-mode SiC MOSFET RoHS Pb Product Summary Characteristics alue Unit DS 1200 Typical R DS(ON) 160 mω I D ( T C 100 C) 14 A Circuit Diagram TO-247-3L Features *
More informationSpecification Status: Released
PAGE NO.: OF 8 Specification Status: Released GENERAL DESCRIPTION Littelfuse PolyZen devices are polymer enhanced, precision Zener diode microassemblies. They offer resettable protection against multi-watt
More informationNS6A5.0AFT3G, SZNS6A5.0AFT3G Series. 500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
OBSOLETE/EOL NS65.0FT3G, SZNS65.0FT3G Series DTE June/30/2018 PCN/ECN# LFPCN41246 REPLCED BY SM6L Series 500 Watt Peak Power Zener Transient Voltage Suppressors Littelfuse.com Unidirectional The NS6xxFT3G
More informationn For use in telecommunication circuit applications requiring low current protection with high surge tolerance
*RoHS COMPLIANT & **HALOGEN FREE 0.5 SinglFuse SF-3812TM-T Series Features n Replacement for Bourns Telefuse models B0500T, B1250T and B2000T n For use in telecommunication circuit applications requiring
More informationSST-10-R. Red LED. SST-10-Red Product Datasheet. Features: Table of Contents. Applications
SST-10-R Red LED Features: Table of Contents SST-10 Binning Structure...2 Product Shipping & Labeling Information...3 Optical and Electrical Characteristics...4 High Power Red LED with Peak Wavelength
More informationMULTILAYER CHIP VARISTORS
Feature Varistor Voltage from5v to 100V Fast response time Low leakage current High surge current ability Bidirectional clamping, high energy Wide Operating temperature range from -55-125 Suitable for
More informationLSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET
LSIMO2E2, 2, 2 mohm, TO-247-3L LSIMO2E2 2 N-channel, Enhancement-mode Si MOSFET RoHS Pb Product Summary haracteristics alue Unit DS 2 Typical R DS(ON) 2 mω I D ( T ) 8 A ircuit Diagram TO-247-3L Features
More informationPTC Thermistor for Automotive:TPM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code
More informationGas Discharge Tubes GTCC23-XXXM-R01-2 Series
Littelfuse Circuit Protection 3mm 2Pole Chip type GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission
More informationDescription. Features. Applications. Environmental. Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage V RRM.
LSICSD1A5, 1 V, 5 A, TO--L LSICSD1A5 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction
More informationSpezifikation für Freigabe / specification for release
Artikelnummer / part number : 82550200 Datum / Date : 31.07.06 description : 0805 SMD VARISTOR Lead Free SMD size: 0805 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SIZE W L T a 0402 0.5
More informationGEN2 SiC Schottky Diode LSIC2SD120A20, 1200 V, 20 A, TO-220-2L. Description. SiC Schottky Diode. Features. Environmental
LSIC2SD12A2, 12 V, 2 A, TO-22-2L LSIC2SD12A2 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating
More informationGEN2 SiC Schottky Diode LSIC2SD120E40CC, 1200 V, 40 A, TO-247-3L. Description. SiC Schottky Diode. Features. Applications.
LSIC2SD12E4CC RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175
More informationPTC Thermistor for Automotive:TPM-C Series
SMD PTC Thermistor for Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics
More informationSurface Mount Multilayer Varistors
ESD Protection (ES) Series Fast Response < 0.5 ns Low Working 5 V Low Capacitance Low Leakage Current < 1 μa Low Application Fields: Cell Phones Digital Cameras PDAs MP3 Notebooks Working (Max) (Max) Leakage
More informationLSIC1MO170E V N-channel, Enhancement-mode SiC MOSFET
LSIMOE,, mohm, TO--L LSIMOE N-channel, Enhancement-mode Si MOSFET RoHS Pb Product Summary haracteristics alue Unit DS Typical R DS(ON) mω ( T ). A ircuit Diagram TO--L Features * * Body diode Optimized
More informationSST-10-SB. Sky Blue LED. SST-10-Sky Blue Product Datasheet. Features: Table of Contents. Applications
SST-10-SB Sky Blue LED Features: Table of Contents SST-10 Binning Structure...2 Product Shipping & Labeling Information...3 Optical and Electrical Characteristics...4 High Power Sky Blue LED with Peak
More informationFEATURES. SMD Style. Reflow soldering. Lead (Pb)-free APPLICATIONS. U R (V) x 5.8
ECV Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors SMD Style Miniature dimension Pb-free Available RoHS* COMPLIANT Extended temperature range: 105 C QUICK REFERENCE DATA DESCRIPTION
More informationSinglFuse SF-1206HIxxxM Series Features
E SinglFuse SF-1206HIxxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High inrush current withstand fuse n UL 248-14 listed n RoHS compliant* and halogen
More informationSGM4056 High Input Voltage Charger
GENERAL DESCRIPTION The SGM456 is a cost-effective, fully integrated high input voltage single-cell Li-ion battery charger. The charger uses a CC/CV charge profile required by Li-ion battery. The charger
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationGAS DISCHARGE TUBES (GDTS)
GAS DISCHARGE TUBES (GDTS) Littelfuse's GDTs (Gas Discharge Tubes) are placed in front of, and in parallel with, sensitive telecom equipment such as power lines, communication lines, signal lines and data
More informationMLE Varistor Series. Features. Size Metric EIA Applications.
The MLE Series family of Transient Voltage Suppression devices are based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress ESD events, including those specified
More information2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationBourns ESD Protection Short Form Brochure
Bourns ESD Protection Short Form Brochure ChipGuard ESD Suppressors Transient Voltage Suppressor (TVS) Diodes TVS Diode Arrays Steering Diode Arrays i ESD Protection Requirements Integrated circuits usually
More informationDATA SHEET: InGaN White : DDW-LJG. With the intense colors that seem to glow with energy and its significant brightness, DomiLED TM
DATA SHEET: DomiLED TM InGaN White : DDW-LJG DomiLED TM With the intense colors that seem to glow with energy and its significant brightness, DomiLED TM white LED is a highly reliable design device. Its
More informationDATA SHEET: InGaN White : DDW-UJG. With the intense colors that seem to glow with energy and its significant brightness, DomiLED TM
DATA SHEET: DomiLED DomiLED With the intense colors that seem to glow with energy and its significant brightness, DomiLED white LED is a highly reliable design device. Its dynamic nature makes it perfect
More informationNC7SP17 TinyLogic ULP Single Buffer with Schmitt Trigger Input
NC7SP17 TinyLogic ULP Single Buffer with Schmitt Trigger Input Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/Os at CC from 0.9 to 3.6 Propagation Delay (t PD ): 4.0ns Typical for 3.0
More informationDEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types P4KE6.8 thru P4KE440
GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATT STEADY STATE TVS P4KE SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4 watt surage capability
More information1W, 10V - 200V Surface Mount Silicon Zener Diode
1W, 10V - 200V Surface Mount Silicon Zener Diode FEATURES Photo Glass passivated junction Ideal for automated placement Low inductance Typical IR less than 1μA above 11V Compliant to RoHS Directive 2011/65/EU
More informationNTC Thermistor for Automotive: TSM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. Operating temperature range: -50 ~ +150 3. Superior stability in high-temperature and high-humidity environment 4. RoHS & Halogen Free (HF) compliant
More informationIntroduction fo FPV Series Multilayer Chip Varistor
Introduction fo FPV Series Multilayer Chip Multilayer Chip s (MLV) are Transient Voltage Suppressors (TVS) which manufactured from semiconducting ceramics by the highly advanced multilayer formation technologies,
More informationDOMINANT. Opto Technologies Innovating Illumination. InGaN White S-Spice : SSW-LLG-I5 DATA SHEET: SpiceLED TM. Features: Applications:
DATA SHEET: SpiceLED TM SpiceLED TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size
More informationType AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
More informationTransient Voltage Suppressor
Features 400W surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) Typical IR less then 1μA above 10V RoHS
More informationTeleLink SM Fuse. CSA Approved File No. LR UL Recognized E Patent Pending. TeleLink SM Fuse. Product Description.
Product Description The TeleLink Surface Mount (SM) surge resistant time lag fuse has been designed to offer the ultimate in circuit protection while meeting the necessary surge requirements of the telecommunications
More informationNC7SV08 TinyLogic ULP-A 2-Input AND Gate
NC7S08 TinyLogic ULP-A 2-Input AND Gate Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/Os at CC from 0.9 to 3.6 Extremely High Speed t PD - 1.0 ns: Typical for 2.7 to 3.6 CC - 1.2 ns:
More informationSpecification Status: Released
PAGE NO.: 1 OF 7 Termination Material: Copper, Ni, Tin Fuse Element: Copper/Copper alloy Body Material: Fiberglass/Epoxy Operating Temperature -55 C to +125 C (with de-rating) Specification Status: Released
More informationPositive Temperature Coefficient (PTC) Data Sheet
Positive Temperature Coefficient (PTC) Data Sheet Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable
More informationNo. Test Requirement Test Condition Test Reference. 10 cycles
*RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on
More informationLSIC2SD120A10. GEN2 SiC Schottky Diode LSIC2SD120A10, 1200 V, 10 A, TO-220-2L. RoHS. Description
LSIC2SD12A1 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
More informationDOMINANT. Opto Technologies Innovating Illumination. InGaN White : DDW-DZJG-1-I1 DATA SHEET: DomiLED TM. Features: Applications:
DATA SHEET: DomiLED TM DomiLED TM Synonymous with function and performance, the DomiLED TM series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability
More informationSurface Mount > 250S Series. Description. Features. Applications. Customer Premises Equipment (CPE) Central Office (CO)/ telecom centers.
POLY-US Resettable PTs 250S Series RoS escription The 250S igh Voltage Radial device is a Polymer-based PT suitable to protect telephony equipment against lightining and power cross strikes. The 250S Series
More informationDATASHEET ISL88001, ISL88002, ISL Features. Applications. Pinouts. Ultra Low Power 3 Ld Voltage Supervisors in SC-70 and SOT-23 Packages
DATASHEET ISL88001, ISL88002, ISL88003 Ultra Low Power 3 Ld Voltage Supervisors in SC-70 and SOT-23 Packages FN6174 Rev 2.00 The ISL88001, ISL88002, ISL88003 supervisors are extremely low power 160nA voltage
More informationFeatures 60R010X & 60R017X. P d typ. (W) I max (A) V max (Vdc)
60R Series RoHS * Description The 60R Series radial leaded device is designed to provide overcurrent protection for ( 60V) applications where space is not a concern and resettable protection is preferred.
More informationDOMINANT. Opto Technologies Innovating Illumination. InGaN White : DDW-DZJG-1 DATA SHEET: DomiLED TM. Features: Applications:
DATA SHEET: DomiLED TM DomiLED TM Synonymous with function and performance, the DomiLED TM series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More information400W, 5V - 188V Surface Mount Transient Voltage Suppressor
400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Excellent clamping capability Fast response time: Typically
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Features... 2 Applications... 2 Approvals... 2 Part Marking... 3 System... 4 Absolute Ratings... 4 Fuse Configuration and Dimensions... 5 Specifications...
More informationSinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics
*RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed
More informationC308F 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications
Technical Data 4405 Supersedes October 2017 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications Agency information curus Recognition file number: E19180, Guide JDYX2/JDYX8 Applications
More information0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M
*RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250
More informationCRS-A Series High Power Anti-Surge Resistor
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*
More information