SYNTHESIS NEW OFFER. Customers. Adaptation. Content. Multi-ranges

Transcription

1

2 Customers Adaptation Euro 6 Euro 5 Euro 3/4 SYNTHESIS NEW OFFER Multi-ranges Content Positioning of the switchs (T, T High, C 2.5m, K) Cross-member G145 (T, T High, C 2.5m, C 2.3m, K, D Wide) Ranges C and K Tridem models available (C 2.5m) Range D Low DTI11 ( D Wide ) Rear overhang 1,900 mm for right-hand side member clearance ( D Wide ) Front ale 8 t and 9 t (D Wide) Master Speed limiter 60 km/h (D Wide) Offer Compressed Natural Gas (CNG) (D Wide) (Germany, Austria, Croatia, Slovenia) Frigoblock DTI8 pre-fitment (D 2.1m) (UK, Ireland) Short overhang available for wheelbase E20 for 4,5 t Mineral white 2 / 7

3 T, T HIGH, C 2.5M, K Positioning of the switches Until now each switch had a fied position in a module independently of vehicle configuration. For vehicle built from June 4 th, 2017 switches will be brought together in as few modules as possible. Customer benefit Each empty module is replaced by an additional card holder storage. T, T HIGH, C 2.5M, C 2.3M, K, D WIDE Cross-member G145 Removal of cross-member and tow hook G145. For drawbar application, the cross-member and tow hook G150 are still available in the offer depending on model. Variants removed 10932: Cross member G : Rockinger 400 G145 tow hook 60238: Rockinger 430 G145 tow hook Note On the model C 2.5m, rigid 42 (version K off road), the rear overhang 1,445 mm (1GTES) becomes standard (suitable with cross member 10933). The rear overhang 1,345 mm (1GTER) variant remains available with the air suspension. With mechanical suspension, the rear overhang can be requested by Customer Adaptation. 3 / 7

4 C 2.5M Model 84*4 Tridem In order to simplify the ordering, models Tridem (version On Road) have been defined in Partner. These models are available in ale configuration tab under the heading 84*4 Tridem. Each model integrates the V1608 customer adaptation, it is documented with the available variants and integrates the price of the transformation. The technical view is corrected. CAUTION: weight and dimensions informations are not automatically documented. They remain on the basis of a 64 model. Improves the turning radius up to 15 % compared to a standard 84. More payload on rear ales. Rear lift and steering ale. D WIDE Low DTI11 D Wide with DTI11 engine is now available for high-volume application. Up to 430 hp in high-volume applications. More appropriate for drawbar towing vehicles. Models 8 Low models dedicated: Low 18 t DTI hp and 430 hp Low 19 t DTI hp and 430 hp Low 25 t DTI hp and 430 hp Low 26 t DTI hp and 430 hp 4 / 7

5 D WIDE Rear overhang 1,900 mm for right-hand side member clearance Lenght of the rear overhang at 1,900 mm dedicated for refuse application for customer adaptation right-hand side member clearance only (V9102, V9103). Reduce the bodybuilder leadtime. Avoid chassis modification by the bodybuilder. Variant V2607: Rear overhang 1,900 mm for right-hand side member clearance D WIDE Front ale 8 and 9 tons Opening of the 9 tons capacity of the front ale on natural gas offer CNG. Opening of the 8 tons capacity of the front ale on high volume offer Low. Improve weight distribution of the body. Variants 4UR05: Front load 8,000 kg 4UR06: Front load 9,000 kg 11022: Ma front technical capacity 8 tons 11055: Ma front technical capacity 9 tons D WIDE Speed limiter 60 km/h Opening speed limiter at 60 km/h on natural gas offer (CNG) for refuse collector models. Display of the limitation on a label located in the frame of the driver side door. The maimum technical capacity can be increased by 10 % depending on the profile of the tires. Allows a fuel consumption reduction. Improved driving comfort avoiding ecessive speed violations. Variant 60131: Speed limiter 60 km/h 5 / 7

6 D WIDE Offer Compressed Natural Gas (CNG) (Germany, Austria, Croatia, Slovenia) D Wide with natural gas NGT9 engine 320 hp is now available. 4 models CNG are available: - 2 dedicated for refuse application with vertical ehaust. - 2 dedicated for distribution application with ehaust outlet in track. Customer benefit alternative energy to diesel to reduce CO 2 emissions. Models Refuse collector 18 t Refuse collector 26 t Distribution 18 t Distribution 26 t D 2.1M Frigoblock DTI8 pre-fitment (United Kingdom, Ireland) Pre-fitment for the latest generation of liquid cooled Frigoblock generators (AW22.5 and AW30 series) dedicated for the DTI8 only. Require engine oil pan aluminium (1JU04). Fridge equipement 100 % électric allowing compared to diesel: - to reduce emissions of CO 2. - to reduce noise. - to increase payload. Variant 1EZ04: 3 groove pulley + frigoblock prefitment 6 / 7

7 MASTER Short overhang available for wheelbase E20 for 4,5 t Master 4.5 t is now available with the short overhang for wheelbase E20. Price of all models Master 4.5 t oh single cab is adjusted to be consistent. Variants 103GU: Wheelbase E : Short Overhang MASTER Mineral white As announced previously, standard color for Master will change for all vehicles produced after 2018 january 8 th. This color switch was decided by Renault SA to increase customer perception of the vehicles. After this date, the color Glacier white (670KP) will be no longer available and will be replaced by the color Mineral white (670Y3). Vehicles will be produced with Glacier white until December 22 th, Configuration of vehicles might be modified according to their position in the order book. Standard color will be switched on Partner Proposition accordingly to the order book. 7 / 7