Installation instructions, accessories - Alarm, basic kit S60 / S80 / V70 / V70 XC / XC /

Size: px

Start display at page:

Download "Installation instructions, accessories - Alarm, basic kit S60 / S80 / V70 / V70 XC / XC /"

Elinor Cameron
5 years ago
Views:

1 S60 / S80 / V70 / V70 XC / XC70 Section Group Weight(Kg/Pounds) Year Month / S , S , S , S , S , S , S , S , S , S80 (-06) 1999, S80 (-06) 2000, S80 (- 06) 2001, S80 (-06) 2002, S80 (-06) 2003, S80 (-06) 2004, S80 (-06) 2005, S80 (-06) 2006, V70 (00-) 2000, V70 (00-) 2001, V70 (00-) 2002, V70 (00-) 2003, V70 (00-) 2004, V70 (00-) 2005, V70 (00-) 2006, V70 (00-) 2007, V70 (00-) 2008, V70 (00-08) 2000, V70 (00-08) 2001, V70 (00-08) 2002, V70 (00-08) 2003, V70 (00-08) 2004, V70 (00-08) 2005, V70 (00-08) 2006, V70 (00-08) 2007, V70 (00-08) 2008, V70 XC (01-) / XC70 (-07) 2001, V70 XC (01-) / XC70 (-07) 2002, V70 XC (01-) / XC70 (-07) 2003, V70 XC (01-) / XC70 (-07) 2004, V70 XC (01-) / XC70 (-07) 2005, V70 XC (01-) / XC70 (-07) 2006, V70 XC (01-) / XC70 (-07) 2007, V70 XC (01-) / XC , V70 XC (01-) / XC , V70 XC (01-) / XC , V70 XC (01-) / XC , V70 XC (01-) / XC , V70 XC (01-) / XC , V70 XC (01-) / XC Replaces issue: D Page 1 of 10

2 Required tools A D A Page 2 of 10

3 IMG Page 3 of 10

4 INTRODUCTION NOTE! Read through the entire text before carrying out any work. The front page gives the date of this edition and the edition it replaces Alarm, basic kit Note! This system is connected to the car's electrical system. It requires software unique to the car. The second page shows the tools needed for the installation and the contents of the installation kit The illustrations display the procedure in order of operation. The order of operation is repeated in the text section Cut out the text page in order to follow the illustrations and text at the same time. Page 4 of 10

1A Illustration A applies to the S80 Remove the headlamp wiper arm (1). Disconnect the washer hose Remove the plastic protector (2) using a weatherstrip tool.

D8600332 Illustration B applies to the V70 (00 ) and the S60 1B Disconnect the headlamp washer hose at the joint (1) Remove the headlamp wiper arm by removing the nut (2)

Illustration C applies to the V70 (00 ) and the S60 M3501105 Remove the trim strip on the bumper by prying it off at one end using a weatherstrip tool.

5 1A Illustration A applies to the S80 Remove the headlamp wiper arm (1). Disconnect the washer hose Remove the plastic protector (2) using a weatherstrip tool. Start at the centre of the protector Disconnect the turn signal lamp cable. Remove the protector. D Illustration B applies to the V70 (00 ) and the S60 1B Disconnect the headlamp washer hose at the joint (1) Remove the headlamp wiper arm by removing the nut (2) under the cover and pulling it off. Illustration C applies to the V70 (00 ) and the S60 M Remove the trim strip on the bumper by prying it off at one end using a weatherstrip tool. Then carefully pull the trim strip off. 1C Illustration D applies to the V70 (00 ) and the S60 Remove the number plate by prying out the bottom of the moulding and removing it Remove the two screws (1) on the number plate holder. Remove the number plate holder Remove the centre trim strip on the bumper by prying it off at one end using a weatherstrip tool, and then carefully pulling it off. M D M Page 5 of 10

2A Illustration A applies to the S80 Carefully drill out 4 of the 5 blind rivets (1) from the wing liner at the front edge of the wheel arch Push in the centre of the clips (2).

Illustration B applies to the V70 (00 ) and the S60 Drill out the four blind rivets (1) which hold the inner wing liner at the bumper Unscrew the screw (2). Press forward.

Illustration D applies to the V70 (00 ) and the S60 Remove the two screws (1) holding the bumper Remove the bumper by pulling it forward to free it from the guides on the left and

6 2A Illustration A applies to the S80 Carefully drill out 4 of the 5 blind rivets (1) from the wing liner at the front edge of the wheel arch Push in the centre of the clips (2). Remove the clips Remove the screws (3) and (4) from the bumper M Pull out the front slightly. Disconnect the connector on the left-hand side 2B Lift off the front. Illustration B applies to the V70 (00 ) and the S60 Drill out the four blind rivets (1) which hold the inner wing liner at the bumper Unscrew the screw (2). Press forward. 2C M Illustration C applies to the V70 (00 ) and the S60 Push in the centre of the clips (1). Remove the clips. Illustration D applies to the V70 (00 ) and the S60 Remove the two screws (1) holding the bumper Remove the bumper by pulling it forward to free it from the guides on the left and right-hand sides. If the car is equipped with fog lamps: Disconnect the connectors. 2D M Illustration E applies to the V70 (00 ) and the S60 Carry out the following on the left-hand side of the car Remove the bumper mounting bracket. First remove the three screws (1). M Page 6 of 10

2E M8600518 3 Carry out the following on the right-hand side of the car Raise the car Turn the wheels to the left Carefully drill out the remaining

D8600335 4 Carry out the following on the right-hand side of the car Disconnect the existing connector (1) from the clip Install the siren in the

D3902163 5A Illustration A applies to the S80 Carry out the following on the left-hand side of the car Disconnect the connectors (1) for the

7 2E M Carry out the following on the right-hand side of the car Raise the car Turn the wheels to the left Carefully drill out the remaining blind rivet from the wing liner at the front edge of the wheel arch Remove the nuts (1) from the wing liner. Fold down the wing liner (2). D Carry out the following on the right-hand side of the car Disconnect the existing connector (1) from the clip Install the siren in the front (2) and rear (3) guide hole Install the screw (4) in the siren mounting Connect the existing connector (1) to the siren connector (5). D A Illustration A applies to the S80 Carry out the following on the left-hand side of the car Disconnect the connectors (1) for the headlamp Remove the headlamp screws (2). Pull out the headlamp Disconnect the turn signal lamp and the headlamp wiper connectors D Remove the headlamp. Page 7 of 10

5B Illustration B applies to the V70 (00 ) and the S60 Carry out the following on the left-hand side of the car Remove

Disconnect the connectors Remove the headlamp.

outer edges of the front cover plate to free it from its mounting (1) Lift up the front cover plate on the left side.

8 5B Illustration B applies to the V70 (00 ) and the S60 Carry out the following on the left-hand side of the car Remove the four screws (1) holding the headlamp to the body Pull out the headlamp slightly. Disconnect the connectors Remove the headlamp. M Applies to the V70 (00 ) and S60 with Automatic Climate Control, Electronic Climate Control Remove the six screws (1) for the front cover plate. M Applies to the V70 (00 ) and S60 with Automatic Climate Control, Electronic Climate Control Pull up the outer edges of the front cover plate to free it from its mounting (1) Lift up the front cover plate on the left side. Position a shim between the front cover plate and the headlamp mounting. M Only applies to left-hand drive cars Remove the cover (1) and the screw from the bonnet catch control Pull out the carpet from the front edge of sill trim panel Disconnect the cable from the control. D Page 8 of 10

9 Mark out the position of the screw heads on the bonnet catch bracket (1) Remove the bonnet catch screws (2) Disconnect the wire from the left bonnet catch (3). Remove the bonnet catch. D8200096 10 Install the cable on the new bonnet catch (from the kit) Install the bonnet catch.

Only applies to left-hand drive cars Reinstall the cable to the bonnet opener control Tighten the control using the screw. Reinstall the cover Reinstall the carpet.

9 9 Mark out the position of the screw heads on the bonnet catch bracket (1) Remove the bonnet catch screws (2) Disconnect the wire from the left bonnet catch (3). Remove the bonnet catch. D Install the cable on the new bonnet catch (from the kit) Install the bonnet catch. Secure the bonnet catch with the two screws. Note! Marked positions for the screw heads. M Connect the bonnet catch connector to the existing connector beside the bonnet catch. Only applies to left-hand drive cars Reinstall the cable to the bonnet opener control Tighten the control using the screw. Reinstall the cover Reinstall the carpet. Applies to all cars Check the function of the bonnet catches. 11 Applies to the S80 Reinstall the left headlamp Reinstall the right wing liner Reinstall the bumper Reinstall the plastic protectors under both headlamps Reinstall the headlamp wiper arms and the headlamp washer hoses for both headlamps Secure the wing liner using blind rivets on both sides. See operation 2 and 3. Check the headlamp beam alignment. Applies to the V70 (00 ) and S60 with Automatic Climate Control, Page 9 of 10

10 Electronic Climate Control Reinstall the front cover plate. Applies to the V70 (00 ) and the S60 Reinstall the left headlamp Reinstall the bumper and the mounting brackets Install the three trim strips Reinstall the headlamp wiper arms and the headlamp washer hoses for both headlamps (if applicable) Secure the wing liner using rivets. Install and tighten the screws on both sides Check the headlamp beam alignment. 12 Remove the cover (1) on the left-hand side of dashboard Install a 5 A fuse: in terminal 29 for cars up to and including model year 00. in terminal 38 for cars from model year inclusive. Cars from model year 05 have this fuse fitted. D Program the software. See the service information in VADIS/VIDA. Check the function of the alarm. 13 Install the decals on the front side windows. Applies to Sweden and Norway Apply the type decal to the inside of the glove compartment Apply decals SSF (S) / FG (N) to the front side windows. A Page 10 of 10

Wiper arm and wiper motor, headlamp, replacing

"VCC137971 EN 20110112" file://c:\info\vv132007\ie\en\31\vcc137971.htm Page 1 of 2 Wiper arm and wiper motor, headlamp, replacing Removal Preparations Switch off the ignition. Headlamp wiper arm Lift up