1 of 2 5/25/17, 4:57 PM

Size: px

Start display at page:

Download "1 of 2 5/25/17, 4:57 PM"

Louise Hunter
5 years ago
Views:

1 of 2 5/25/17, 4:57 PM Overview - Bumper Cover, Audi Q5 S-Line and Audi SQ5 If the vehicle has lane change assistance, the lane change assistance control module (J769) / (J770) must be recalibrated.

1 1 of 2 5/25/17, 4:57 PM Overview - Bumper Cover, Audi Q5 S-Line and Audi SQ5 If the vehicle has lane change assistance, the lane change assistance control module (J769) / (J770) must be recalibrated. 1 Spoiler Different versions. Refer to the Parts Catalog. Removing and installing. Refer to [Attachments, Removing and Installing ] See: Rear Bumper > Removal and Replacement > Attachments, Removing and Installing. 2 Bolt 2.2 Nm

2 2 of 2 5/25/17, 4:57 PM Quantity: 10 3 Rear Bumper Cover Removing and installing. Refer to [Bumper Cover, Removing and Installing ] See: Rear Bumper Cover / Fascia > Removal and Replacement > Bumper Cover, Removing and Installing. 4 Bolt Tightening sequence. Refer to - item 4 - [(Item 4) Bolt ] See: Rear Bumper Cover / Fascia > Removal and Replacement > Overview - Bumper Cover, Audi Q5 5 Guide Piece Removing and installing. Refer to [Bumper Guide Pieces, Removing and Installing ] See: Rear Bumper Reinforcement > Removal and Replacement > Bumper Guide Pieces, Removing and Installing. 6 Lane Change Assistance Control Module Equipment levels Overview. 7 Clip 8 Nut 4 Nm Quantity: 4 9 Cover For the towing eye. 10 Trim 11 Bolt 1.5 Nm Quantity: 2 12 Bolt 1.5 Nm Quantity: 2 13 Trim Strip For the bumper cover spoiler Removing and installing. Refer to [Attachments, Removing and Installing ] See: Rear Bumper > Removal and Replacement > Attachments, Removing and Installing ALLDATA, LLC. All Rights Reserved. (Version )

1 of 5 5/25/17, 4:58 PM Bumper Cover, Removing and Installing Special tools, testers and auxiliary items required Pry Lever (80-200) Body Socket (T40078) Removing Vehicles through MY 2012: -

3 1 of 5 5/25/17, 4:58 PM Bumper Cover, Removing and Installing Special tools, testers and auxiliary items required Pry Lever (80-200) Body Socket (T40078) Removing Vehicles through MY 2012: - Disconnect the electrical connector on the Parking Aid Control Module (J446) if applicable. - Free up the electrical wiring harness on the control module bracket - arrow - by disconnecting the cable tie Press the grommet outward. Vehicles from MY 2013:

2 of 5 5/25/17, 4:58 PM - Disconnect the connectors - 1 and 3 -.

4 2 of 5 5/25/17, 4:58 PM - Disconnect the connectors - 1 and Unlock the connector mount and free it up. - Push the grommet toward the outside. Continuation for all: - Left: Remove the vehicle tools and the mount for the vehicle tools. - Right: Remove the fuse panel F in the right side of the luggage compartment.

3 of 5 5/25/17, 4:58 PM - Remove the rear lid end trim panel. - Remove the nuts - 3 - from the threaded pins on the bumper cover - 1 -. Tightening Specifications.

5 3 of 5 5/25/17, 4:58 PM - Remove the rear lid end trim panel. - Remove the nuts from the threaded pins on the bumper cover Tightening Specifications. Refer to - item 8 - [(Item 8) Nut ] See: Rear Bumper Cover / Fascia > Removal and Replacement > Overview - Bumper Cover, Audi Q5 S-Line and Audi SQ5 Remove both nuts on the inside with a (T40078). - Remove the bolts from the wheel housing liner Remove the bolts on the lower bumper cover section.

4 of 5 5/25/17, 4:58 PM - Press the clip - 4 - on the bumper cover off using the (80-200) as shown.

- Separate the side piece - 3 - from the rear side panel - arrow - and remove the bumper cover to the rear with a

6 4 of 5 5/25/17, 4:58 PM - Press the clip on the bumper cover off using the (80-200) as shown. - Disengage the the lower bumper cover from the guide pins Separate the side piece from the rear side panel - arrow - and remove the bumper cover to the rear with a second technician. Installing Tightening specification. Refer to [Overview - Bumper Cover ] See: Rear Bumper Cover / Fascia > Removal and Replacement > Overview - Bumper Cover.

7 5 of 5 5/25/17, 4:58 PM - When installing, the side catches on the guide piece must engage completely into the bumper cover If the vehicle has lane change assistance, the lane change assistance control module (J769) / (J770) must be recalibrated ALLDATA, LLC. All Rights Reserved. (Version )

1 of 2 5/17/17, 1:22 PM

1 of 2 5/17/17, 1:22 PM Trim Molding, Removing and Installing Special tools, testers and auxiliary items required Wedge Set (T10383) Removal Wedge (T40233) Removing - Starting at the front, pry the trim