TOYOTA HIGHLANDER 2016 ON BOARD VACUUM CLEANER
|
|
- Janice Murphy
- 5 years ago
- Views:
Transcription
1 2016 Part Numbers: (01, 02, 04) Accessory Code: SV1000 NOTE: Will not work in Highlander HV Kit Contents Item # Quantity Reqd. Description 1 1 Vacuum Assembly 2 1 Hose Assembly 3 1 Tool Kit 4 1 Template 5 1 Mounting Bracket 6 1 Wire Harness 7 1 User Manual Hardware Bag Contents Item # Quantity Reqd. Description 1 1 Rubber Washer, 9.7mm ID 2 5 Rubber Washer, 6mm ID 3 1 Shoulder Washer, 23mm 4 5 Flat Washer, 23mm x 2mm 5 3 Flange Bolt, M6 x 25mm 6 3 Flange Bolt, M6 x 16mm 7 1 Self Tapping Screw 8 15 Cable Tie, 8" Black Additional Items Required for Installation Item# Reqd. Quanity Description 1 1 3M Automotive Sealant 2 1 Torque Audit Sheet, PIO Only Recommended Tools Safety Tools Notes Safety Glasses Vehicle Protection Cloth / Rag Protective Tape Installation Tools Ratchet Socket Notes 3/8" Drive 8mm,10mm,12mm,14mm Trim Panel Removal Tool Screwdriver Flat Head Flexible Pickup Tool or Fish Tool Torque Wrench Scissors Tape Knife or Cutters Zip Cutter or equivelant Electrical Tape Clip Remover 3.0 N m (26.5 in-lbf) 5.4 Nm (48 in-lbf) 42 Nm (31 lbf) Accessory Color Guide Part Number Item # Legend Accessory Color Description Hitch & Harness Shop Vac. Black _ X Almond_ X Ash_ Recommended Sequence of Application X Southeast Toyota Distributors, LLC Page 1 of 17
2 Installation instructions must be followed precisely. Damage or malfunction that occurs due to deviation from the installation instructions or mis-assembly of adjacent parts that are not within the scope of these instructions are not the responsibility of Shop Vac Corporation. Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this accessory should follow approved guidelines to ensure a quality installation. These guidelines can be found in the "Accessory Installation Practices" document. This document covers such items as: Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.). Safety (eye protection, re-checking torque procedure, etc.). Vehicle Disassembly/Reassembly (panel removal, part storage, etc.). Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.). Notes: Vehicle Preparation: Removed Parts - 1. Place all removed parts on a protected surface. Cable Ties - When using cable ties to secure the harness, clip the ties after securing them. Machine Screws - Start all machine screws by hand Professional installation by an authorized dealer is highly recommended. Read all instructions thoroughly prior to installation. Ensure all parts are included in kit and follow all vehicle safety guidelines. Read all battery warnings on disconnecting and reconnecting the vehicle's battery. Follow all procedures and disconnect and isolate the negative battery terminal. Wear safety glasses and take all safety precautions during installation. Template included in kit has Scale Verification box that should be measured before proceeding with installation. If box does not measure to dimensions specified on template, discard template and get a replacement template that does measure correctly. Disassembly of Vehicle Open rear hatch, driver's door and driver's side passenger door. Open the hood and locate the battery on the driver's side of the vehicle. Follow all guidelines and disconnect the negative battery cable using a 10mm wrench, and isolate the negative battery terminal. Note: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS System. Page 2 of 17
3 Disassembly of Vehicle 3. In the rear cargo area, remove deck board assembly and deck board sub assembly. 4. Fold both third row seats down. 5. Remove the deck side trim box from the vehicle by disengaging the claws and clips using a trim panel removal tool (Fig.1). Fig Remove the 7 clips (black arrows) using a clip remover (Fig.2). Fig Remove the rear deck floor box by removing the nut, and disengaging the claws and clips using a trim panel removal tool (Fig.3). Fig. 3 Page 3 of 17
4 Disassembly of Vehicle 8. Remove the rear floor finish plate by disengaging the claws and clips using a trim panel removal tool (Fig.4). 9. Remove third row seat assembly. Fig Remove the front door scuff plate by disengaging the claws and clips using a trim panel removal tool (Fig.5). Fig Remove the kick plate by disengaging the claw band clip using a trim panel removal tool (Fig.6). Fig. 6 Page 4 of 17
5 Disassembly of Vehicle 12. Loosen the drivers door scuff plate by disengaging the clips using a trim panel removal tool (Fig.7). Fig Remove the drivers door scuff plate by disengaging the claws and clips using a trim panel removal tool (Fig.8). 14. Disconnect both driver side rear seatbelt assemblies. Fig Remove the rear cupholder trim cover by disengaging the claws and clip using a trim panel removal tool (Fig.9). Fig. 9 Page 5 of 17
6 Disassembly of Vehicle 16. Remove and discard the service hole cover in rear panel by disengaging the claw using a trim panel removal tool (Fig.10). Fig Remove the trim pocket cover in rear panel by disengaging the claws using a trim panel removal tool (Fig.11). Fig Turn rear luggage hook clockwise and remove from rear panel (Fig.12). Fig Remove the rope hooks by pulling down on the metal clips, prying up on the covers, and removing the bolts using a 10mm socket and ratchet (Fig.13). Fig. 13 Page 6 of 17
7 Disassembly of Vehicle 20. After template has been checked for accuracy (see pg. 2, note 4), cut out paper templates according to the instructions on each (follow "Cut Out Template Along This Line"). Tape templates to vehicle panels, and place tape on hashed areas of template, leaving corners open for tracing (Fig.14). Fig Trace templates onto panels wherever template instructs "Cut Out Interior Panel Along This Black Line" or "Cut Out Interior Panel Along This Shape." Remove the templates once tracing is complete. Fig Remove the rear panel by removing three bolts, positioned at the cup holder location (Step X), trim pocket cover location (Step Y), and rear luggage hook location (Step Z), and disengaging all the claws and clips with a trim panel removal tool (Fig.15). Set aside for modifications to panel. 23. Using a flat head screwdriver, remove 2 plastic fasteners at the top of the wheel well that hold the plastic under liner in place. Pull under liner away from fender to allow access to wire routing area (Fig.16). Fig. 16 Harness Installation 1. Remove the wire retainer on the back of the harness power connector by prying clips away from housing body and sliding back (Fig.17). Fig. 17 Page 7 of 17
8 Harness Installation 2. Insert narrow flat blade screwdriver into mating end of connector, just under the top terminal. Apply pressure down and pull back on the top wire from the back of the housing (Fig.18). Fig Fully remove the top wire from the connector housing (Fig.19). This wire (black arrow) will be routed in the following steps to the back of the vehicle. The rest of the harness will not be needed until making the connection near the unit installation location (Step 17). Fig Using electrical tape, cover the terminal removed from the connector housing to protect it while routing in the following steps (Fig.20). Fig Locate the battery on the driver's side of the vehicle. Follow all guidelines and disconnect positive wire (white arrow) from the battery using a 12mm wrench or socket and ratchet. Keep the wire separated and avoid all contact between the battery posts (Fig.21). Note: All warning labels located on the battery. Fig Using a 10mm socket and ratchet, remove battery support post (white arrow). Slide battery forward until it stops (Fig.22). Fig. 22 Page 8 of 17
9 Harness Installation 7. Install fuse holder in space behind battery (white arrow), with ring terminal routed near positive battery connection (Fig. 23). Use cable tie (yellow arrow) to connect ring terminal side of fuse holder to existing harness. Route harness along existing harness path to driver's side fender, using another cable tie (yellow arrow) to secure together. Fig Continue routing of harness inside fender area. Follow existing harness, using a cable tie (white arrow) to secure harness (Fig.24). Fig Route through the grommet around the hood release cable located on the firewall (white circle/arrow) and feed harness through until snug (Fig.25). Fig Route the harness under the dash along kick panel following the existing wiring harnesses, using a cable tie (white arrow) to secure to the existing harness (Fig.26). Fig. 26 Page 9 of 17
10 Harness Installation 11. Continue to route the harness along the driver's side threshold following the existing wiring harnesses, using 2 cable ties (white arrows) spaced out evenly in the span to secure to the existing harness as shown (Fig.27). Fig. 27 Fig Route the harness following the existing wiring harnesses under the cross member along the center post (white arrows / white dotted line). Using a flexible pickup tool, route the harness between the front and rear door behind the panel following the existing wiring harness (Fig.28). 13. Continue routing the harness along the rear door threshold following the existing wiring harnesses, using 2 cable ties (white arrows) spaced out evenly in the span to secure to the existing harness as shown (Fig.29). Fig Before proceeding, make sure that the panels and threshold plates can be reinstalled and do not cut or pinch the harness or the existing wiring. 15. Route the harness up through the inner structure of the driver's side quarter panel, using 2 cable ties (white arrows) to secure to the existing harness as shown (Fig.30). Fig. 30 Page 10 of 17
11 Harness Installation Fig Continue routing the harness up over the wheel well, following the path of the existing harness. There will be extra harness length, so from the point marked by the red arrow, keep 3 feet of harness length for finishing the run. Attach a cable tie at the locations of the red and white arrows and tighten. The length of harness left over should be bunched up and secured between the area marked by the two yellow arrows, which will be the two cable ties used to secure each end of the bunched harness to the existing harness (Fig.31). 17. Install wiring harness ground terminal to existing ground connection (red circle). Remove the bolt with a 10mm socket and ratchet, being careful not to lose the lock washer, add ground ring terminal, and reinstall. Tighten the nut to 5.4 N m (48 in-lbf). Install cable tie around both harness wires at location of white arrow (Fig.32). Fig Remove electrical tape from routed wire terminal. Connect positive wire back into wiring harness connector - terminal is polarized and will only latch in when inserted correctly. Pull back on wire once inserted to test connection. Replace wire retainer on back of connector (Fig.33). Fig Slide battery back into position and tighten support post with 10mm socket and ratchet (Fig.34). Tighten the nut to 5.4 N m (48 in-lbf). Fig. 34 Page 11 of 17
12 TOYOTA Bracket Installation 1. Using zip cutter, cut side panel removed previously along the traced lines from the template (Fig.35). Remove cut out sections of panel and clean edges of sharp burrs / material left over from cut. Fig. 35 Bracket Bracket Fig Install bracket with 10mm socket and ratchet using hardware provided to existing mounting holes. The (3) 16mm long silver ange bolts are used, along with the (1) shoulder washer, (1) rubber washer with 9.7mm ID, and (2) at washers and (2) rubber washers with 6mm ID. Stackup breakouts are provided (Fig.36). The left mounting point (red circle) requires the shoulder washer and 9.7mm ID rubber washer. The top right and bottom right mounting points (yellow circles) require the at washer and the 6mm ID rubber washer (Fig.37). Fig. 37 Tigthen all bolts to 3.0 Nm. (26.5 in-lbf ) 3. to original position, making sure to route the harness connection through the opening and above the bracket for access in connecting vacuum assembly (Fig.38). All rear panels need to be installed before vacuum unit. Fig. 38 Page 12 of 17
13 Vacuum Assembly Installation 1. Remove both panel doors on vacuum assembly, and remove canister assembly (Fig.39). Fig Following all guidelines, reinstall the positive ring terminal connection and attach the wiring harness ring terminal to it. Tighten the nut to 5.4 N m (48 inlbf). Note: Make sure to position the ring terminal so that the protective cover can be reattached over the battery post (Fig.40). Fig. 40 Reconnect the vehicle's negative battery cable (Fig.41). Tighten the nut to 5.4 N m (48 in-lbf). Do not touch the positive terminal with any tool when installing the negative battery cable. Fig Plug wiring harness into mating connector on back of vacuum assembly (Fig.42). Fig Press power button to test vacuum for functionality before attaching vacuum assembly to vehicle. If vacuum does not start, and red light on power button flashes, see table of error codes (pg. 16) to aid in troubleshooting. If vacuum does start, press power button again to turn off - light on switch should be off. Page 13 of 17
14 Vacuum Assembly Installation Fig Install vacuum assembly with 10mm socket and ratchet using hardware provided to mounting holes on bracket (white circle/arrow). The (3) 25mm long silver flange bolts are used, along with the (3) flat washers and (3) rubber washers with 6mm ID. Stackup breakout is provided (Fig.43). Start all (3) bolts by hand (Fig.44). Before tightening fully, check top edge of vacuum assembly for mating to top panel. If not aligned, loosen bolts and reposition unit. Once unit is aligned with the panel, tighten bolts to 3.0 N m (26.5 in-lbf). Fig Install self tapping screw in hole inside hose storage cavity (white circle/arrow). Tighten with 8mm socket and ratchet (Fig.45). Fig Insert canister assembly and panel door covering canister area (Fig.46). Fig. 46 Page 14 of 17
15 Vacuum Assembly Installation 8. Install hose assembly by threading nut on hose end onto hose attachment point inside hose storage cavity (Fig.47). Press power button again to test vacuum airpath connections - suction should be felt at end of hose assembly. Turn vacuum off using power button. Fig Insert hose assembly into hose storage cavity following steps shown (Fig.48). Install panel door covering hose area. Note: Graphics shown depict Sienna model, but hose insertion method is the same. 10. Reposition seat belts (Torque to 42 N m (31 ft-lbf), thresholds, kick plate and components removed in previous steps. 11. Place tool kit in area under deck board. Place user manual in glove compartment. Fig. 48 Page 15 of 17
16 Error Code Display 1. The following table lists the error codes (listed as Blinking Count) for possible errors the unit will encounter. The blinking will be visible on the LED in the user switch, repeating with a brief pause between counts. This can be stopped by pressing the switch, or the error will timeout on its own after approximately 30 seconds. Blinking Count Error Detected Overtemperature Maximum Voltage Exceeded Overspeed Motor Timing Error Motor Overload Voltage Out of Range Locked Motor Battery Voltage Low Battery Voltage Low Page 16 of 17
17 On Board Vacuum Cleaner u Southeast Toyota Distributors, LLC Page 17 of 17
TOYOTA SIENNA TRAILER WIRE HARNESS Preparation
Preparation Part Number: PT791-08150 (non-se) PT791-08102 (SE only) Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Module Harness 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting
More informationTOYOTA VENZA 2009 TRAILER WIRE HARNESS Procedure
Part Number: PT791-0T099 Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Wire Harness Module 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24 6
More informationTOYOTA VENZA 2009 TRAILER WIRE HARNESS Procedure
Part Number: PT791-0T099 Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Wire Harness Module 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24 6
More informationTOYOTA RAV TRAILER WIRE HARNESS Section I Installation Preparation
Section I Installation Preparation Part Number: 08921-42900 Kit Contents Item # Quantity Reqd. Description 1 1 Converter 2 1 Wire harness 3 1 Sub wire harness No.1 4 2 Plastic Tie (300mm) 5 21 Plastic
More informationTOYOTA HIGHLANDER TRAILER WIRE HARNESS Preparation
Preparation Part Number: PT219-48111 Kit Contents Item # Quantity Reqd. Description 1 1 Converter 2 1 Flat 4-pin wire harness 3 5 Plastic tie 4 1 Special plastic tie for stud mount 5 1 Packing 6 2 Bolt
More informationLEXUS RC 350/RC-F ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT944-24150 Kit Contents Item # Quantity Reqd. Description 1 2 Inner LED Scuff 2 2 Outer Scuff 3 1 Hardware Bag Hardware Bag Contents Item # Quantity Reqd. Description 1 15 20
More informationTOYOTA Matrix XM SATELLITE RADIO Preparation
Preparation Part Number: Mounting Kit PT546-12080 Tuner Assembly 86180-0W031 (Music Only) Tuner Assembly PT546-00090 (Music Plus Data) NOTE: Part number of this accessory may not be the same as the part
More informationGeneral Applicability Note: Recommended Tools. Personal & Vehicle Protection Safety Goggles Seat Covers Floor Covers Special Tools. Installation Tools
TOYOTA HIGHLANDER/HIGHLANDER HV 2008- Preparation Part #: PT923-00111 Conflicts: JBL Audio, Factory Navigation NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents:
More informationPlease note that these instructions apply to the Toyota Towing Wire Harness. The part you re looking for is PT
This download was hosted by LanderFan.com, your source of tips, tricks, hacks, how-to articles, and other newsy tidbits related to the new (2014+) Toyota Highlander.! Please note that these instructions
More informationTOYOTA RAV TRAILER WIRE HARNESS Preparation
Preparation Part Number: PU322-42013-UW Kit Contents Item # Qty Description 1 1 Trailer Module Harness 2 1 Trailer 4-Flat Harness 3 1 Trailer Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24
More informationLEXUS GS 350/450h ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT922-30120 (GS350) PT922-30130 (GS450h) NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents Item # Quantity Req'd. Description 1 1 Illuminated
More informationPart Number: T4R-2IN1
Date: 12.11.2014 TOYOTA HIGHLANDER 2015 LED Fog Light & DRL 2in1 Part Number: T4R-2IN1 Kit Contents Item # Quantity Reqd. Description 1 2 DRL + Fog Light Housing 2 1 Driver Box 3 1 Harness bag 4 1 User
More informationPart Number: T4R-2N1. Hardware Bag Contents. General Applicability. Conflicts - Limited Models
Date: 12.11.2014 TOYOTA HIGHLANDER 2014-2016 LED Fog Light & DRL 2 in 1 Part Number: T4R-2N1 Kit Contents Item # Quantity Reqd. Description 1 2 DRL + Fog Light Housing 2 1 Driver Box 3 1 Harness bag 4
More informationTOYOTA COROLLA ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT942-02140 Kit Contents Item # Quantity Reqd. Description 1 1 Illuminated Scuff plate, Front Right Hand 2 1 Illuminated Scuff plate, Front Left Hand 3 1 Door Scuff plate, Rear
More informationTOYOTA PRIUS XM SATELLITE RADIO Preparation
Preparation Part Number: Mounting Kit PT546-4700 Tuner Assy 8680-0W03 NOTE: Part number of this accessory may not be the same as the part number shown. Tuner Assembly Kit Contents (8680-0W03) Item # Quantity
More informationTOYOTA TACOMA EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-35052 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 1 T-tap Connectors,
More informationTOYOTA COROLLA ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT942-02140 Kit Contents Item # Quantity Reqd. Description 1 1 Illuminated Scuff plate, Front Right Hand 2 1 Illuminated Scuff plate, Front Left Hand 3 1 Door Scuff plate, Rear
More informationTOYOTA TACOMA FOG LIGHT
TOYOTA TACOMA 2013 - FOG LIGHT Part Number: 00016-35220 Accessory Code: LF10 Conflicts - Factory Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 1 Hardware bag 3 1 Switch Assembly
More informationTOYOTA TACOMA LED DRL Black-Out
TOYOTA TACOMA 2013 - LED DRL Black-Out Part Number: 00016-35021 Accessory Code: LDBO10 Conflicts - Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 DRL Housing 2 1 Driver Box 3 1 Harness bag
More informationSCION XB SUBWOOFER ENCLOSURE Preparation
Preparation Part Number: Kit Contents Item # Quantity Reqd. Description 1 1 Subwoofer enclosure 2 1 Wire Harness 3 1 Paper Template 4 1 Plastic Drill Template 5 1 Hardware Bag Hardware Bag Contents 1 Item
More informationTOYOTA TACOMA FOG LIGHT
TOYOTA TACOMA 2012 - FOG LIGHT Part Number: 00016-35220 Accessory Code: LF10 Conflicts - Factory Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 1 Hardware bag 3 1 Switch Assembly
More informationTOYOTA FJ CRUISER AIR DAM/LIGHT BAR Preparation
Preparation Part Number: PT278-35071 Kit Contents Item # Quantity Reqd. Description 1 1 Air Dam / Light Bar Hardware Bag 1 Contents Item # Quantity Reqd. Description 1 2 Screw, M6x33mm, Wafer Head 2 2
More informationTOYOTA im INTERIOR LIGHT KIT Preparation
Preparation Part Number: PT922-12170 Kit Contents Item # Quantity Reqd. Description 1 1 Main Wire Harness 2 1 Switch 3 1 Switch Header 4 1 ECU 5 1 ECU Bracket 6 1 Hardware Kit 7 1 Instruction Card 8 1
More informationTOYOTA CAMRY HANDS FREE BLU LOGIC Preparation
TOYOTA CAMRY 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio, Factory Navigation NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents:
More informationSCION xb SIRIUS SATELLITE RADIO TUNER Preparation
Preparation Part Number: PTS3-52050 NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents Item # Quantity Reqd. Description Antenna, Exterior 2 Wire Harness 3 Bracket,
More informationPart Number: T4R-2N1. Hardware Bag Contents. General Applicability Models with factory fog light. Conflicts -
Date: 07.30.2015 TOYOTA TUNDRA 2014-2016 LED Fog Light & DRL 2 in 1 Part Number: T4R-2N1 Kit Contents Item # Quantity Reqd. Description 1 2 DRL + Fog Light Housing 2 1 Driver Box 3 1 Harness bag 4 1 User
More informationTOYOTA SIENNA LED DRL Black-Out
TOYOTA SIENNA 2013 - LED DRL Black-Out Part Number: 00016-08021 Accessory Code: LDBO10 Conflicts - Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 DRL Housing 2 2 DRL s bezels 3 1 Driver
More informationLED Fog Light. Conflicts Note: 1226, General Applicability Fits Models Additional Items Required For Installation
LED Fog Light Year & Model Part Number Conflicts Note: 1226, 1228 2017 Prius TPR-817 General Applicability Fits Models 1221 1225 1223 1227 1224 Additional Items Required For Installation Items 1 N/A 2
More informationTOYOTA TACOMA XSP-X LED DRL. Part Number: Accessory Code: LDRL10
TOYOTA TACOMA 2013 - XSP-X LED DRL Part Number: 00016-35230 Accessory Code: LDRL10 Conflicts -None Kit Contents Item # Quantity Reqd. Description 1 2 LED DRL 2 1 Driver Box 3 1 Harness bag 4 Hardware Bag
More informationPart Number: TTU-BGB14-DRL TTU-BGP14-DRL
11/15/16 TOYOTA TUNDRA 2014-17 Billet Grille w/led DRL Part Number: TTU-BGB14-DRL TTU-BGP14-DRL Kit Contents Item # Quantity Reqd. Description 1 2 LED DRL 2 1 Driver Box 3 1 Switch 4 1 User Card 5 2 Hardware
More informationTOYOTA SIENNA XM SATELLITE RADIO Preparation
Preparation Part Number: Mounting Kit: PT546-08070 Tuner Assy: 86180-0W031 Tuner Assy Kit Contents (86180-0W031) Item # Quantity Reqd. Description 1 1 Tuner Assy, Stereo Component Mounting Kit Contents
More informationTOYOTA FJ CRUISER 2007 AUXILIARY LIGHTS Preparation
TOYOTA FJ CRUISER 2007 AUXILIARY LIGHTS Preparation Part Number: PT297-35061 Kit Contents Item # Quantity Reqd. Description 1 2 Driving Lamp Assembly 2 1 Switch Harness 3 1 Lamp Harness 4 2 Stone Shield
More informationTOYOTA TACOMA FOG LIGHT
Date: 10.31.2013 TOYOTA TACOMA 2012-15 FOG LIGHT (Halogen or LED) Part Number: TTA-312 Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 1 Switch Assembly 3 1 Fog light operation guide 4 1
More informationTOYOTA Yaris Hatchback EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 Auto Dimming Mirror Assembly w/ shift area light 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description
More informationTOYOTA TACOMA XM SATELLITE RADIO Preparation
Preparation Part Number: Mounting Kit PT546-35090 Tuner Assembly 8680-0W03 NOTE: Part number of this accessory may not be the same as the part number shown. Tuner Assembly Kit Contents (8680-0W03) Item
More informationLEXUS CT 200h ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT922-89100 Kit Contents Item # Quantity Req'd. Description 1 1 Door Sill, Front Right Hand 2 1 Door Sill, Front Left Hand 3 1 Door Sill, Rear Right Hand 4 1 Door Sill, Rear Left
More informationTOYOTA RAV4/HV INTERIOR LIGHT KIT Preparation
Preparation Part Number: PT413-42130 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 3 Hardware Bag Contents Item # Quantity Reqd. Description 1 20 Cable Tie 2 2 Scotchlok 3 2 Foam Pad
More informationTOYOTA TUNDRA COLD AIR INTAKE Preparation SEQUOIA
Preparation SEQUOIA 2008 - Part Number: PTR03-34070 (5.7L) PTR03-34072 (4.7L) Kit Contents: 5.7L Item # Quantity Reqd. Description 1 1 Lid: Air Filter 2 1 Inlet Pipe: 5.7L 3 1 Air Filter: TRD Conical 4
More informationConflicts - Fog Lights
TOYOTA CAMRY 2013 - BLACKOUT LED DRL Part Number: 00016-32270 Accessory Code: LDBO10 Conflicts - Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 DRL Housing 2 2 DRL s bezels 3 1 Driver Box
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory S P/N 08V67-SJC-101 Application 2012 RIDGELINE Publications No. AII 12006 Issue Date NOV 2011 PARTS LIST Back-up sensor harness 3 Wire ties with small clips (2 Not used)
More informationSCION xb HEADREST DVD RSE Section I Installation Preparation. Part Number: PT
Section I Installation Preparation Part Number: PT900-52080 Kit Contents Item # Quantity Reqd. Description 1 2 DVD Headrest Unit 2 2 Headrest Extension Cables 3 1 Audio Interface Module 4 1 Audio Interface
More informationTOYOTA VENZA HANDS FREE BLU LOGIC Preparation
TOYOTA VENZA 2009- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: For kits manufactured
More informationSCION tc 2014 FOG LIGHT KIT
Part #: PT413-21140 Conflicts: P/N PTR11-21100 Lowering Springs (CA only) Kit Contents: Wire Ties Self-Tapping Screws Switch Relay Fog Light Bezel, Left and Right Side Wire Harness Fog Lamp, Left and Right
More informationSCION xb 2004 SATELLITE RADIO TUNER Section I Installation Preparation
Section I Installation Preparation Part Number: PT546 52040 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Satellite Tuner 2 1 Ground Cable 3 1 Tuner Cable 4 2 Tuner
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory S P/N 08V67-SJC-101 Application 2010 RIDGELINE Publications No. AII 42117 Issue Date AUG 2009 PARTS LIST Back-up sensor harness 3 Wire ties with small clip (2 Not used)
More informationTOYOTA PRIUS C FOG LIGHT
TOYOTA PRIUS C 2012 - FOG LIGHT Part Number: 00016-47160 Accessory Code: LF10 Conflicts NONE Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 2 Fog Lamp s bezels 3 1 Switch Assembly 4 1 Fog
More informationSCION xa 2004 SATELLITE RADIO TUNER Section I Installation Preparation
Section I Installation Preparation Part Number: PT546 52040 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Satellite Tuner 2 1 Ground Cable 3 1 Tuner Cable 4 2 Tuner
More informationPart Number: T4R-2N1. Hardware Bag Contents. General Applicability XLE, Limited
Date: 2.10.2016 TOYOTA RAV4 2016 2 in 1 LED UPGRADE KIT Part Number: T4R-2N1 Kit Contents Item # Quantity Reqd. Description 1 2 DRL + Fog Light Housing 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5
More informationPart Number: PT
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 Auto Dimming Mirror Assembly w/ shift area light 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description
More informationPart Number: TTA-712. Hardware Bag Contents. General Applicability All models
Date: 09.30.2013 TOYOTA TACOMA 2012-15 LED DRL Part Number: TTA-712 Kit Contents Item # Quantity Reqd. Description 1 2 DRL s bezels w/led DRL 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5 1 Switch Hardware
More informationSCION xd INTERIOR LIGHTING UPGRADE Preparation
Preparation Part Number: PTS21-52085 Light Guide Kit Contents Item # Quantity Reqd. Description 1 1 Controller Board, 4 color programmed w/ Bracket 2 1 RGB, LED Engine wire harness 3 2 14mm Light Rod,
More informationTOYOTA TACOMA LED DRL. Part Number: TTA-712
Part Number: TTA-712 Kit Contents Item # Quantity Reqd. Description 1 2 DRL s bezels w/led DRL 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5 1 Switch Hardware Bag Contents Item # Quantity Reqd. Description
More informationTOYOTA LAND CRUISER 2003 DVD VES
LEXUS LX470 Section I Installation Preparation Part Number: PT296 6002D 03/16 (LC) PT296 6002L 03/16 (LX) Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 FPD Assembly
More informationTOYOTA SOLARA CONVERTIBLE XM SATELLITE RADIO Preparation. Part Number: Mounting Kit PT
Preparation Part Number: Mounting Kit PT546-06061 Tuner Assy 86180-0W030 Tuner Assy Kit Contents (86180-0W030) 1 1 Tuner Assy, Stereo Component Mounting Kit Contents (PT546-06061) 1 Ground Cable 1 1 Wire,
More informationTOYOTA YARIS XM SATELLITE RADIO Preparation (Sedan & Hatchback)
Preparation (Sedan & Hatchback) Part Number: Mounting Kit PT546-52096 Tuner Assy 86180-0W031 Tuner Assy Kit Contents (86180-0W031) Item # Quantity Reqd. Description 1 1 Tuner Assy, Stereo Component Mounting
More informationTOYOTA TUNDRA TVIP V4 Preparation
Preparation Part Number: PT398-00100 PT398-00100-AA Conflicts Do not install into vehicles without RKE system. Recommended Sequence of Application Item # Accessory 1 TVIP/RES Any TVIP or RES system 2 XM
More informationSCION xa AUTO-DIMMING MIRROR Preparation
Preparation Part Number: PT374-52040 (Compass) PT374-21050 (Homelink) Kit Contents Item # Quantity Reqd. Description 1a 1 AD Mirror Assembly w/compass & Map Lights (P/N PT374-52040) 1b 1 AD Mirror Assembly
More informationTOYOTA TACOMA FOG LIGHT (Halogen or LED)
Part Number: TTA-312 / TTA-812 Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 1 Switch Assembly 3 1 Fog light operation guide 4 1 Harness bag Hardware Bag Contents Item # Quantity Reqd.
More informationScion xa SATELLITE RADIO TUNER Preparation
Preparation Part Number: PTS31-00051 Kit Contents Item # Quantity Reqd. Description 1 1 Antenna, Interior 2 1 Antenna Tape Pad 3 1 Wire Harness 4 1 Bracket, Floor 5 3 Hardware Bags 6 3 Templates 7 1 SIRIUS
More informationPart Number: TTA-2N1. Hardware Bag Contents. General Applicability SR5, TRD Sport, TRD Off-Road, Limited
Date: 2.10.2016 TOYOTA TACOMA 2016-2 in 1 LED UPGRADE KIT Part Number: TTA-2N1 Kit Contents Item # Quantity Reqd. Description 1 2 DRL + Fog Light Housing 2 1 Driver Box 3 1 Harness bag 4 1 User s card
More informationLED Fog Light & DRL 2in1. TOYOTA RAV4 Part Number: Accessory Code: L D4000
TOYOTA RAV4 Part Number: 00016-00081 Accessory Code: L D4000 2017 LED Fog Light & DRL 2in1 Conflicts - Vehicles w/o factory fog lights, Model 4476 Kit Contents Item # Quantity Reqd. Description 1 2 Fog
More informationConf licts Note: TOYOTA Tacoma 2016 LED Illumination Package (Interior and Exterior) Part Number: Accessory Code: LL1000.
TOYOTA Tacoma 2016 LED Illumination Package (Interior and Exterior) Part Number: 00016-00069 Accessory Code: LL1000 Conf licts Note: Color Applicability/Trim Level Kit Contents Item # Quantity R eqd. Description
More informationTOYOTA PRIUS V LED DRL Black-Out
TOYOTA PRIUS V 2012 - LED DRL Black-Out Part Number: 00016-47021 Accessory Code:LDBO10 Conflicts Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 DRL Housing 2 2 DRL s bezels 3 1 Driver Box
More informationConflicts: Vehicles without a sunroof Vehicles with a single sunroof
Toyota Sienna (Dual Sunroof) 2011-10.2 Overhead Video Part Number: 00016-00110 00016-00110-17 Fit Kit 00016-00120 00016-00120-17 Fit Kit Accessory Code: ED5 Conflicts: Vehicles without a sunroof Vehicles
More informationToyota Prius Interior Light Upgrade
Toyota Prius 2012- Interior Light Upgrade Part Number 00016-00095 Accesory Code: IL2 Conflicts Kit Contents Item # Quantity Reqd. Description 1 1 Y Adapter 2 1 Wire harness 3 1 Hardware Kit 4 2 White Light
More informationCAMRY STRIP LED DRL TOYOTA Part Number: Accessory Code: LDRS10. PIO / DIO Rev. A 02/26/13. Doc
Doc. 02.126.00 TOYOTA CAMRY PIO / DIO Rev. A 2013-02/26/13 STRIP LED DRL Part Number: 00016-32280 Accessory Code: LDRS10 Conflicts - Only works on Camry SE Kit Contents Item # Quantity Reqd. Description
More informationSCION xb OVERHEAD CONSOLE Preparation. Part Number:
SCION xb 2008 - OVERHEAD CONSOLE Preparation Part Number: 08253-12800 Kit Contents Item # Quantity Reqd. Description 1 1 Overhead Console 2 1 Bracket 3 1 Plastic cover 4 1 Photo Mount Sheet 5 1 Installation
More informationSCION tc 2005 LEATHER STEERING WHEEL Preparation. Part Number: (Silver/Dark Gray)
Preparation Part Number: 08460 21810 (Silver/Dark Gray) NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents Item # Quantity Reqd. Description 1 1 Steering Wheel
More informationTOYOTA YARIS HATCHBACK INTERIOR LIGHT UPGRADE Preparation
Preparation Part Number PTS21-52062-08 NOTE: Part number of this accessory may not be the same as the part number show Kit Contents Item # Quantity Reqd. Description 1 1 12 Light Guide 2 1 7 Light Guide
More informationPart Number: T4R-2N1. Hardware Bag Contents. General Applicability Models with factory fog light
11/10/16 TOYOTA CAMRY 2012-2014 2 in 1 LED UPGRADE KIT Part Number: T4R-2N1 Kit Contents Item # Quantity Reqd. Description 1 2 DRL + Fog Light Housing 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5 1
More informationTOYOTA TACOMA HANDS FREE BLU LOGIC Preparation. Item 5 Item 6 Item 7 Item 8. Item 4. General Applicability Note: Recommended Tools
TOYOTA TACOMA 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00098 Conflicts: JBL Audio, Factory Navigation Kit Contents: NOTE: Part number of this accessory may not be the same as the part number
More informationTOYOTA COROLLA EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ PRNDL 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 T-tap Connectors,
More informationTOYOTA PRIUS 2004 TVIP V2 (GBS ADD ON) Section I Installation Preparation
Section I Installation Preparation Part Number: 08586 47840 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 3 1 ECU Mounting Bracket Hardware Bag
More informationScion xb EC Rearview Mirror w/ Shift Light Preparation
2008 - Preparation Part Number: 00016-79800 Accessory Code: YM10 Kit Contents Item # Quantity Reqd. Description 1 1 Mirror Assembly w/ PRNDL 2 1 Hardware bag 3 1 Installation Manual Hardware Bag Contents
More informationTOYOTA PRIUS C FOG LIGHT (Halogen & LED)
TOYOTA PRIUS C 2012-14 FOG LIGHT (Halogen & LED) Part Number: TPC-312 / TPC-812 Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 2 Bezels 3 1 Switch Assembly 4 1 Fog Light Operation guide
More informationToyota 4RUNNER With/MR Overhead Video
Toyota 4RUNNER With/MR 2010-10.2 Overhead Video Part Number: 00016-00110; Fit Kit-00110-14, Beige 00016-00120; Fit Kit-00120-14, Gray Accessory Code: ED7 Conflicts: Vehicles without a sunroof Kit Contents:
More informationTOYOTA CAMRY FOG LIGHT
Date: 05.01.2014 TOYOTA CAMRY 2012-14 FOG LIGHT (Halogen and LED) Part Number: TCA-312 Kit Contents Item # Quantity Reqd. Description 1 2 Light Housings 2 2 Fog Light Bezels 3 1 Switch Assembly 4 1 Fog
More informationTOYOTA COROLLA LED DRL eyebrow. Part Number: TCO-DRL
Part Number: TCO-DRL Kit Contents Item # Quantity Reqd. Description 1 2 DRL s bezels w/led DRL 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5 1 Switch Hardware Bag Contents Item # Quantity Reqd. Description
More informationConflicts: Vehicles with a sunroof
Toyota 4Runner Non/MR 2010-10.2 Overhead Video Part Number: 00016-00110; Fit Kit -00110-15, Beige 00016-00120; Fit Kit -00120-15, Gray Accessory Code: ED6 Conflicts: Vehicles with a sunroof Kit Contents:
More informationPart Number: TCA-712SE
Date: 09.04.2013 TOYOTA CAMRY SE 2012-14 LED DRL Part Number: TCA-712SE Kit Contents Item # Quantity Reqd. Description 1 2 DRL s bezels w/led DRL 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5 1 Cushion
More informationTOYOTA TUNDRA 2015 Billet Grille w/led DRL
TOYOTA TUNDRA 2015 Billet Grille w/led DRL Part Number: 00016-34088 Accessory Code: BG3000 Conflicts Models 1794 and Platinum Kit Contents Item # Quantity Reqd. Description 1 2 LED DRL 2 1 Driver Box 3
More informationTOYOTA RAV FOG LIGHT KIT Preparation
Preparation Part Number: PT413-42163 Kit Contents Item # Quantity Reqd. Description 1 7 7 Wire Tie 2 4 #10-16 Cross Pan-Washer Head Screws 3 1 Switch 4 1 Relay 5 1 LH Fog Light Bezel 6 1 RH Fog Light Bezel
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory S Application 2010 ODYSSEY Publications No. AII 41818 Issue Date JUNE 2009 PARTS LIST Right center sensor clip (Black) Backup Sensor Attachment Kit P/N 08V67-SHJ-101C
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS [1] Description: Tow Hitch Wire Harness Kit [2] Application: Nissan Rogue Note: Tow Harness application is limited to specific vehicle option packages that include tow harness
More informationConflicts. Toyota Tacoma 2016 Frameless EC Mirror w/ Compass and HomeLink. Part Number: Accessory Code: ME4000
Toyota Tacoma 2016 Frameless EC Mirror w/ Compass and HomeLink Part Number: 00016-05463 Accessory Code: ME4000 Conflicts Note: NONE Item # Quantity Reqd. Description 1 1 Frameless Mirror w/compass 2 1
More informationSCION iq AUDIO Preparation
Preparation Part Number: PT546-00140 (Base Radio) Kit Contents Item # Quantity Reqd. Description 1 1 Receiver Assembly, Radio Unit 2 1 Hardware Bag Hardware Bag Contents Item # Quantity Reqd. Description
More informationPart Number: STC-501. Hardware Bag Contents. General Applicability. Conflicts. Date: SCION tc LED DRL in FOG LIGHT HOUSING
Date: 09.30.2013 SCION tc 2011-2013 LED DRL in FOG LIGHT HOUSING Part Number: STC-501 Kit Contents Item # Quantity Reqd. Description 1 2 LED DRL housings 2 2 Bezels 3 1 Driver Box 4 1 Harness bag 5 1 User
More informationTOYOTA tc HANDS FREE BLU LOGIC Preparation
TOYOTA tc 2011- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio, Factory Navigation NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents:
More informationScion xd EC Rearview Mirror Preparation
Scion xd 2010 - EC Rearview Mirror Preparation Part Number: 00016-09101 Code: CM9 Kit Contents Item # Quantity Reqd. Description 1 1 Mirror Assembly w/ Compass and Homelink 2 1 Hardware bag Hardware Bag
More informationSCION xb EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ PRNDL 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 T-tap Connectors,
More informationTOYOTA PRIUS FOG LIGHT (Halogen or LED)
Part Number: TPR-413 / TPR-813 Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 1 Lower Grill 3 1 Switch Assembly 4 1 Fog Light Operation guide 5 1 Harness Bag Hardware Bag Contents Item
More informationYARIS 4-DOOR 2007 INTERIOR LIGHT UPGRADE
Document # 3999 4/26/06 4-DOOR 2007 INTERIOR LIGHT UPGRADE Preparation Part Number: 00016-52060 Code: IL1 Kit Contents Item # Quantity Reqd. Description 1 1 12 Light Guide 2 1 7 Light Guide 3 1 Hardware
More informationTOYOTA TACOMA Part Number: TTA-BGB16-DRL TTA-BGP16-DRL
TOYOTA TACOMA 2016-17 Date: 10.29.2016 Billet Grille w/led DRL Part Number: TTA-BGB16-DRL TTA-BGP16-DRL Kit Contents Item # Quantity Reqd. Description 1 2 LED DRL 2 1 Driver Box 3 1 Switch 4 1 User Card
More informationConflicts. TOYOTA TUNDRA 201 LED Fog Light & DRL 2in1. Part Number: Accessory Code: LD4000
TOYOTA TUNDRA 201 LED Fog Light & DRL 2in1 Part Number: 00016-00081 Accessory Code: LD4000 Conflicts 1.) Vehicles w/o factory foglight / Blind spot Monitor 2.) Vehicles with remote control mirror w/seat
More informationToyota Venza Interior Light Upgrade
Toyota Venza 2011 - Interior Light Upgrade Part Number 00016-00095 Accesory Code: IL2 Conflicts Kit Contents Item # Quantity Reqd. Description 1 1 Y Adapter 2 1 Wire harness 3 1 Hardware Kit 4 2 White
More informationTOYOTA HIGHLANDER TVIP V2 (GBS ADD ON) Preparation
Preparation Part Number: 08586-48070 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 GBS ECU 3 1 ECU Mounting Bracket Hardware Bag Contents Item # Quantity Reqd. Description 1 1 Microphone
More informationTOYOTA TACOMA INTERFACE KIT FOR IPOD Preparation
Preparation Part Number: PT545-00082 Kit Contents Item # Quantity Reqd. Description 1 1 Unit Assembly Kit 2 1 Mounting Kit 3 1 Hardware Bags 4 1 Unit and Fit Kit List 5 1 Owner s Manual Unit Assembly Kit
More informationTOYOTA CAMRY FOG LIGHT (Halogen and LED) Part Number: TCA-312 / TCA-812
Part Number: TCA-312 / TCA-812 Kit Contents Item # Quantity Reqd. Description 1 2 Light Housings 2 2 Fog Light Bezels 3 1 Switch Assembly 4 1 Fog Light Operation Guide 5 1 Harness Bag Hardware Bag Contents
More informationLEXUS GX TOWING HITCH Preparation
LEXUS GX460 2014 - TOWING HITCH Preparation Part Number: PT228-60140 Kit Contents Item # Quantity Reqd. Description 1 1 Hitch Assembly 2 1 Wiring Harness Bracket 3 1 Hardware Bag 4 1 Hitch Cover 5 2 Center
More informationINSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 38133-38406 HITCH 2008 ODYSSEY Issue Date NOV 2007 NOTE: A required heavy-duty power steering cooler, ATF cooler and air duct are required
More information