Four-wheel Electric Counterbalanced Lift Trucks E XMS

Transcription

1 STRONG PARTNERS. TOUGH TRUCKS. Four-wheel Electric Counterbalanced Lift Trucks E XMS kg

2 E1.50XM, E1.75XM, E2.00XMS Specification data is based on VDI 2198 Equipment and weight: Weights (line 2.1) are based on the following specifications: Complete truck with mm Vista 2-stage limited free lift mast, 910 mm hook type carriage with load backrest and mm forks. Overhead guard and cushion or pneumatic-shaped solid tyres. Forks: E XMS: 40 x 80 x to mm long Fork spacing: Inside to inside, minimum: Outside to outside, maximum: 50 mm 865 mm

3 NOTE: Specifications are affected by the condition of the vehicle and how it is equipped, as well as the nature and condition of the operating area. If these specifications are critical, the proposed application should be discussed with your dealer. Bottom of forks Without load backrest h 6 subject to +/- 5 mm tolerance, add 63 mm for raised guard Low rider fitted add 37 mm for full suspension seat Stacking aisle width (line 4.33 & 4.34) is based on the V.D.I. standard calculation as shown on illustration. The British Industrial Truck Association recommends the addition of 100 mm to the total clearance (dimension a) for extra operating margin at the rear of the truck. Gradeability figures (lines 5.7 & 5.8) are provided for comparison of tractive performance, but are not intended to endorse the operation of the vehicle on the stated inclines. Follow instructions in the operating manual regarding operation on inclines. = Centre of gravity of unladen truck Ast = w a + x + l 6 + a (see line 4.33 & 4.34) a = Minimum operating clearance (V.D.I. standard = 200 mm BITA recommendation = 300 mm) l 6 = Load length Subtract 32 mm without load backrest Variable Tables key: Add 650 mm with load backrest extension *Standard tread shown-see 3.6 for optional tread Deduct 650 mm with load backrest extension Wide tread required (Standard tread may be supplied at reduced capacity) Notice Care must be exercised when handling elevated loads. When the carriage and/or load is elevated, truck stability is reduced. It is important that mast tilt in either direction be kept to a minimum when loads are elevated. Operators must be trained and adhere to the instructions contained in the Load centre Operating Manual. Rated load (kg) E2.00XMS E1.75XM E1.50XM Distance from front of forks to centre of gravity of load. Rated load Based on vertical masts up to mm to top of forks. Hyster products are subject to change without notice. Lift trucks illustrated may feature optional equipment. Safety: This truck conforms to the current EU requirements. Load centre (mm)

4 Mast and Capacity Information Values shown are for standard equipment. When using non-standard equipment these values may change. Please contact your Hyster dealer for information. The rated capacities shown are for masts in a vertical position on trucks equipped with standard or sideshift carriage and nominal length forks. Masts above the maximum fork heights shown in the mast table are classified as high lift and, depending on the tyre/tread configuration may require reduced capacity, restricted back tilt or wide tread.

5 Product Features Application matched performance and battery shift life Hyster ACX system offers extended shift life or extra AC performance options to suit each application. AC technology on both traction and hydraulics for reliable, positive performance. Brushless DC steering motor. Compact dimensions and extraordinary manoeuvrability offer tight aisle widths. Advanced ergonomic features to inspire productivity Hydraulic control/seat choices. Standard fully adjustable semi-suspension seat with integral armrest. With low effort, soft touch, manual hydraulic levers. Optional e-hydraulic seat with TouchPoint mini-levers provide ultimate fingertip precision control. Optional e-hydraulic seat with TouchControl joystick. Especially suited to intensive applications where hydraulic operation is frequent and accurate/delicate hydraulic control is required. Convenient step and handgrip for ease of access. Demand Sense Steering. Monotrol pedal (optional). Clear view dash display with LCD indicators. 4 pre-programmed performance modes. Pin codes (optional) can be allocated to individual drivers allowing them access only to the performance level suited to their ability and experience. Battery discharge indicator with lift interrupt. Full range of Vista masts. 2 stage limited free lift, 2 or 3 stage full free lift with hydraulic mast cushioning for dependable handling of fragile loads. Offering excellent visibility with smooth, low noise operation. Dependability and low cost of operation Extended battery shift life hour service intervals on most major components*. 100% brushless AC motors. Auto regenerative braking. On board diagnostics for early warning of maintenance requirements. One piece frame, designed using FEA** technology, and robust steer axle design for proven durability. * Subject to applications survey **Finite Element Analysis

6 TM Strong Partners, Tough Trucks, for Demanding Operations Everywhere. Hyster supplies a complete product range, including Warehouse trucks, IC and Electric Counterbalanced trucks, Container Handlers and Reach Stackers. Hyster is committed to being much more than a lift truck supplier. Our aim is to offer a complete partnership capable of responding to the full spectrum of materials handling issues: Whether you need professional consultancy on your fleet management, fully qualified service support, or reliable parts supply, you can depend on Hyster. Our network of highly trained dealers provides expert, responsive local support. They can offer cost-effective finance packages and introduce effectively managed maintenance programmes to ensure that you get the best possible value. Our business is dealing with your materials handling needs so you can focus on the success of your business today and in the future. Hyster Europe, Flagship House, Reading Road North, Fleet, Hants GU51 4WD, England. Tel: +44 (0) Fax: +44 (0) infoeurope@hyster.com Website: A division of NACCO Materials Handling Limited. 03/09/TLC Printed in England Form No /3 Hyster,, Vista and Monotrol are registered trademarks of Hyster Company in the United States and in certain other countries. TM, Fortens TM, Pacesetter VSM TM, DuraMatch TM, DuraMatch Plus TM, TouchPoint TM, TouchControl TM, EZXchange & HSM TM are trademarks of Hyster Company in the United States and in certain other countries.