High Capacity Forklift Trucks AL WALID EQUIPMENT RENTAL LLC H16-18XM-12, H16-18XMS mm

Transcription

1 Contact Number : AL WALID EQUIPMENT RENTAL LLC High Capacity Forklift Trucks H16-18XM-12, H16-18XMS mm

2 Built on Experience H16-18XM(S) Development Story The H16-18XM(S)-12 Series bene ts from Hyster s long experience of designing and building high capacity forklift trucks. This is the 5th generation machine, since the H360A of 1951, and offers fast handling, reliable proven components, high productivity and represents an excellent return on investment. 2

3 Optional Equipment Application-speci c masts, carriages and forks or coil ram. Radial pneumatic tyres or solid (pneumatic shaped) tyres. Spare wheel, with bias diagonal or radial tyre. Lifting eyes (two on the mast, two on the rear counterweight). A range of lights can be tted, which are available in kit form. Stage IIIA extra power package for H16XM(S)-12 models: 172 kw / 230 Hp engine and TE-17 transmission, instead of standard 145 kw / 195 Hp engine and TE-13 transmission. Coil ram pole: to mm long, coil ram pole with 298 mm diameter. Max. ram pole capacity mm l.c. Extra rear view mirrors on the front fenders. Open Operator Module, instead of fully equipped cab. Mud aps on the rear and front wheels. Wheel nut protection rings, on the steer wheel hubs. Special colour(s) RAL paint. Hydraulic accumulator in the hoist system, recommended for uneven ground conditions. In-Cab / Operator Convenience Items: Air-conditioning system is integrated into the heating and ventilation system It is available with either manual temperature control or climate control. Sunshade screens are tted on the top and rear windows. Choice of hand controls: joystick or levers and switches. Deluxe air suspended seat, instead of mechanically suspended seat. Also available with seat heating. Trainer seat (small extra seat cushion). Support stand with mounting plate, to t computer terminal or communications equipment. Converter: 24 Volt DC to 12 Volt DC. Sideways ing cab, with convenient push-button operation, for excellent service access. 11

4 H16-18XM(S)-12 CHARACTERISTICS 1.1 Manufacturer 1.2 Model designation H16XMS-12 H16XM-12 H18XMS-12 H18XM Power: battery, diesel, LPG, electric mains Diesel Diesel Diesel Diesel 1.4 Operation: manual, pedestrian, stand, seat, orderpicker Seat Seat Seat Seat 1.5 Load capacity Q (kg) Load centre c Load distance (PIN type) x Wheelbase y WEIGHTS 2.1 Unladen weight kg 27,307 26,508 30,136 28, Axle loading with load, front/rear (900mm load centre) kg 42,177 3,570 41,640 3,377 45,593 4,440 44,902 4,144 Axle loading with load, front/rear (1200mm load centre) kg 39,720 3,587 39,145 3,363 44,055 4,081 43,061 3, Axle loading without load, front/rear kg 13,311 13,996 13,430 13,078 14,396 15,740 14,180 14,437 PERFORMANCE DIMENSIONS WHEELS & TYRES 3.1 Tyres: L=pneumatic, V=solid, SE=pneumatic-shaped solid L L L L 3.2 Tyre size, front 14,00 x ,00 x ,00 x ,00 x Tyre size, rear 14,00 x ,00 x ,00 x ,00 x Number of wheels, front/rear (X = driven) 4X 2 4X 2 4X 2 4X Track width, front b Track width, rear b Mast, = forward / = back degrees Height of mast, lowered h Lift h Height of mast, extended h Cab (top wiper) h Seat h Towing coupling h Overall length l Length to face of forks l Overall width b Fork dimensions s/e/l Fork carriage DIN Class, A/B No No No No 4.24 Fork carriage width b Ground clearance under mast (with load) m Ground clearance, centre of wheelbase m Aisle width with pallets 2400mm x 2400mm wide Ast Outer turning radius W a Inner turning radius b Travel speed with/without load km/h Lifting speed with/without load m/sec 0,33 0,38 0,33 0,38 0,33 0,38 0,33 0, Lowering speed with/without load m/sec 0,34 0,39 0,34 0,39 0,34 0,39 0,34 0, Drawbar pull with/without 1.6 km/h * kn Maximum drawbar pull with/without load * kn Gradeability with/without 1.6 km/h % Maximum gradeability with/without load % Acceleration time with/without load (0-15m distance) sec 5,9 6,5 5,9 6,5 5,6 6,4 5,6 6, Service Brake Hydraulic Hydraulic Hydraulic Hydraulic ENGINE 7.1 Engine manufacturer/type Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB Maximum engine output, in accordance with ISO Stage IIIA kw Maximum engine output, in accordance with ISO Stage IIIB kw Governed speed at max power Stage IIIA (145kW) rpm Governed speed at max power Stage IIIA (172kW) rpm Governed speed at max power Stage IIIB rpm Number of cylinders/displacements Stage IIIA/B no,/l 6 6,7 6 6,7 6 6,7 6 6,7 OTHER 8.1 Drive control Torque Convertor Torque Convertor Torque Convertor Torque Convertor 8.2 Working pressure for attachments MPa Oil flow for attachments l/min Sound level at operators ear LpAZ d(b)a per EN Stage IIIA db(a) Sound level at operators ear LpAZ d(b)a per EN Stage IIIB db(a) Towing coupling type Pin Pin Pin Pin Speci cation data is based on VDI

5 Ast = Wa + x + b + a (see line 4.33) a = Minimum operating clearance (V.D.I. standard = 200 mm, BITA recommendation = 300 mm) b = Load length Notes: Speci cations are affected by the condition of the vehicle and how it is equipped, as well as the nature and condition of the operating area. If these speci cations are critical, the proposed application should be discussed with your dealer. Gradeability gures (lines 5.7 & 5.8) are provided for comparison of tractive performance, but are not intended to endorse the operation of the vehicle on the stated inclines. Follow instructions in the operating manual regarding operation on inclines. * Drawbar pull performance gures (line 5.5 & 5.6) are only indicative for comparison purpose. These performances are only possible for a short period of time. Optional TE17 with 172 kw at 2000 rpm Deduct 55 mm for non-cab option With 2440mm forks 200 mm clearance Optional engine Top of forkss Hyster products are subject to change without notice. Lift trucks illustrated may feature optional equipment. The capacities quoted are in conformance with ISO 1074 standard. Safety: This truck conforms to the current EU requirements. Operators must be trained and adhere to the instructions contained in the Operating Manual. 13

6 Capacity Ratings H16XM(S) mm and 1 200, 1 000, 900 mm Mast lift (TOF) Mast lowered H16XM-12 Mast lowered H16XMS mm load centre 900 mm load centre H18XM(S) mm and 1 200, 1 000, 900 mm Mast lift (TOF) Mast lowered mm load centre 900 mm load centre High Capacity At load centres shorter than 1200mm load centres, capacities higher than nominal are possible, e.g.: H16XM(S)-12 handles mm l.c., up to 5.40 m lift. H18XM(S)-12 handles mm l.c., up to 5.40 m lift. For full capacity data, please refer to the capacity table above. Capacity Ratings Available * Single-rating at (and a corresponding mast back angle, depending on mast lift, please refer to the capacity table above). * Multi-rating at mm load centre (and a corresponding mast back angle, depending on mast lift, please refer to the capacity table above). Masts Automatic 2-stage hoist system, for high lifting speeds, both laden and unladen. Rear-mounted lift cylinders (behind the mast channels), for excellent visibility. Mid-high-mounted system. Hose group (for 2 auxiliary functions: 2 x fork positioner, and combined sideshift). Note: For the correct back angle corresponding to a speci c mast lift, please refer to the capacity table above. 14

7 Carriage Multi-purpose, hook-type, sideshift, fork positioning carriage. Overall width 2672 mm for H16XM(S)-12, and 2900 mm for H18XM(S)-12. Sideshift movement, to each side, is mm for H16XM(S)-12, and mm for H18XM(S)-12, depending on the position of the forks. With independent fork positioners (forks can be moved individually). Fork positioning range for H16XM(S)-12: 998 mm is a minimum over the forks (598 mm in between forks) and 2444 mm maximum over the forks. Fork positioning range for H18XM(S)-12:1000 mm is a minimum, over the forks (500 mm in between forks) and 2750 mm maximum, over the forks. Multi-purpose quick-disconnect system, for use with multipurpose hook-type forks. Forks 2440 mm long, multi-purpose, hook-type, quick-disconnect forks. Fork section: H16XM(S)-12: 200 mm wide x 100 mm thick H18XM(S)-12: 250 mm wide x 100 mm thick To suit the multi-purpose, hook-type, sideshift-fork positioning carriage. 15