SRX14/16. Electric Reach Truck kg kg.

Transcription

1 Electric Reach Truck kg kg

2 DIMENSIONS Wa AST e b5 b3 b4 b11 h4 l4 h3 h1 h6 h2 h7 C m2 l2 y l7 l1 s e b5 b3 b4 b11 b1 Wa AST For corresponding data see specification chart.

3 GENERAL DATA Capacity in kg Truck Capacities Capacity at different load centres SRX16 SRX14 Note: The listed capacities are valid only for the standard upright in the vertical position and with standard forks, up to ma. lifting height of mm. The center of gravity of the load may be displaced by ma. 100 mm against the longitudinal center plane of the truck. Load center is determined from top and front face of the forks. The values are based on a mm cube load configuration with the centre of gravity at the true center of the cube. With carriage tilted forward lower capacity values are valid. Attachments, longer forks, eceptional load dimensions and higher lifting heights can reduce the capacity Load center in mm Please contact your CLARK dealer if you require further information. Upright Table Mast type Ma. fork height (h3) Mast lowered (h1) without load Mast etended (h4) with load without load Free lift (h2) with load mm mm mm mm mm Triple Dimensions Related to Battery Compartment Size 1.1 Manufacturer (Abbreviation) CLARK CLARK 1.2 Manufacturer s designation SRX14 SRX16 Depth of battery compartment mm Load center distance 1) mm Dimensions 4.2 Length to face of forks l2 mm Stacking aisle for pallets (l6b12) across Ast mm Stacking aisle for pallets (l6b12) along Ast mm Battery voltage, nominal capacity V/AH 48/465 48/620 48/465 48/620 48/ Battery weight (min/ma) kg 651/ / / / /1297 Performance may vary +5% and -10% due to motor and system efficiency tolerance. The performance shown represents nominal values which may be obtained under typical operating conditions of a machine. CLARK products and specifications are subject to change without notice.

4 SPECIFICATIONS Product Specifications acc. to VDI 2198 Specifications Weight Tyres, Chassis Dimensions Performance Drive line Misc. 1.1 Manufacturer (Abbreviation) 1.2 Manufacturer s designation 1.3 Drive unit 1.4 Operator type 1.5 Load capacity/rated load Q (kg) 1.6 Load center distance c (mm) 1.8 Load distance 1) (mm) 1.9 Wheelbase y (mm) 2.1 Service weight including battery (s. 6.5) kg 2.3 Ale loading, fork retracted, unladen front/rear kg 2.4 Ale loading, forks forward with load front/rear kg 2.5 Ale loading, forks retracted with load front/rear kg 3.1 Tyres 3.2 Tyre size, front 3.3 Tyre size, rear 3.5 Wheels, number front/rear (=drive wheels) 3.6 Tread, front b10 (mm) 3.7 Tread, rear b11 (mm) 4.1 Fork carriage tilt, α=forward/β=backwards deg. 4.2 Height, upright lowered h1 (mm) 4.3 Free lift h2 (mm) 4.4 Lift height h3 (mm) 4.5 Height upright etended h4 (mm) 4.7 Height of overhead guard h6 (mm) 4.8 Seat height h7 (mm) 4.10 Height of support arms incl. load wheel cover h10 (mm) 4.19 Overall length 1) l1 (mm) 4.20 Length to face of forks 1) l2 (mm) 4.21 Width b1 (mm) 4.22 Fork dimensions s e l (mm) 4.23 Fork carriage ISO 2328, A, B 4.24 Fork carriage width b3 (mm) 4.25 Width across forks min/ma b5 (mm) 4.26 Width between support arms b4 (mm) 4.28 Mast reach 1) l4 (mm) 4.31 Ground clearance minimum, unladen m (mm) 4.32 Ground clearance center of wheelbase m2 (mm) 4.33 Stacking aisle for pallets (l6b12) across 1) A st (mm) 4.34 Stacking aisle for pallets (l6b12) along 1) A st (mm) 4.35 Turning radius Wa (mm) 4.37 Length over support arms l7 (mm) 5.1 Travel speed laden/unladen km/h 5.2 Lift speed laden/unladen m/s 5.3 Lowering speed laden/unladen m/s 5.4 Reach speed laden/unladen m/s 5.8 Ma. gradeability laden/unladen % 5.9 Acceleration time laden/unladen (0-15 m) s 5.10 Service brake 6.1 Drive motor output (S2 60min) kw 6.2 Lift motor output (S3 15%) kw 6.3 Battery acc. to DIN 43531/35/ Battery voltage, nominal capacity V/ AH(5hr) 6.5 Battery weight (min/ma) kg 6.6 Energy consumption acc. to VDI cycle kwh/h 8.1 Type of control 8.2 Operating pressure for attachments bar 8.3 Oil flow for attachments l/min 8.4 Sound level, driver s ear according to DIN db(a) CLARK CLARK SRX14 SRX16 Electric 48V Ele 48V Rider-seated Rider-seated / / / / / /3130 Polyurethane Polyurethane Ø Ø Ø Ø /2 1/ /5 3/ Class ll A Class ll A / / /14 14/14 0.4/ / / / / /0.2 8/13 8/13 5.1/ /5.3 electric electric DIN 43531A DIN 43531A 48V V / / Mosfet/AC Mosfet/AC ) Different battery sizes change these values. All values shown are for standard reach truck with integrated side shift.

5 FEATURES AND EQUIPMENT Feature Reliable low-maintenance AC traction motor Adjustable fork width General Features CLARK mast cushioning system Integrated sideshifter Tilting forks Working light Best-view overhead guard Low entrance height 380 mm Battery indicator and hour meter Electronic 180 steering Electronic 360 steering PIN-Code access control Cockpit & Instruments Adjustable control console Mounting bracket for additional devices Height indicator Hydraulic mini-lever control Hydraulic joystick control Emergency stop switch Interactive dash display Steering direction indicator Automotive layout of pedals Power-steering Ergonomics Adjustable and seat Suspension seat vinyl or cloth Maimum legroom and best driving position Adjustable steering wheel = Standard Equipment; = Option Storage compartment

6 FEATURES AND EQUIPMENT Feature Battery & Charging Features Performance & Productivity Safety Maintenance & Service Different battery compartment sizes (SRX14 465/620 Ah / SRX16 465/620/775 Ah) Side battery removal with rollers Easy access for maintenance Various batteries and chargers Fork positioner Load wheel protection Automatic horizontal fork positioning Height preselector Automatic sidesift centering Video monitoring with camera on forks Lift and drive motor with temperature warning Adjustable performance values Electronic wear-free support arm brakes Optimum all-around view Automatic travel speed adjustment Automatic parking brake Load Deadman pedal Lowering limit sensor Easy access for maintenance and service Fault diagnostic via display ZAPI AC contoller = Standard Equipment; = Option Dealer: CLARK Europe GmbH Dr.-Alfred-Herrhausen-Allee Duisburg / Germany Tel.: +49 (0) Fa: +49 (0) Info-europe@clarkmheu.com Nr.: /2016