H25-32XM(S)-12 HYSTER HYSTER HYSTER HYSTER HYSTER. Specification data is based on VDI 2198 DISTINGUISHING MARKS DISTINGUISHING MARKS WEIGHTS WEIGHTS

Transcription

1 HIGH CAPACITY FORKLIFT TRUCKS, H30XMS-9, H32XMS kg, H28XM-12, H30XM-12, H32XM mm STAGE IV

2 H25-32XM(S)-12 DISTINGUISHING MARKS 1.1 Manufacturer (abbreviation) 1.2 Manufacturer s type designation 1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas 1.4 Operator type: hand, pedestrian, standing, seated, orderpicker 1.5 Rated capacity / rated load Q ( t ) 1.6 Load centre distance c 1.8 Load distance, centre of drive axle to fork x 1.9 Wheelbase y seat seat ,200 1,189 1,189 3,655 4,315 H28XM-12 H30XMS-9 H30XM-12 H32XMS-9 H32XM seat seat seat seat seat , , , ,274 1,274 1,274 1,274 1, ,315 3,935 4,315 3,935 4, DISTINGUISHING MARKS WEIGHTS 2.1 Service weight l kg 2.2 Axle loading, laden front / rear kg 2.3 Axle loading, unladen front / rear kg 37,051 37,473 57,869 4,182 57,511 4,962 18,580 18,471 18,670 18,804 44,688 44,439 45,383 45,049 44, ,910 5,778 68,971 5,168 70,133 5,251 72,512 4,487 71,254 5, ,857 21,832 22,862 21,577 22,932 22,451 22,910 22,139 22,847 22, WEIGHTS TYRES & CHASSIS 3.1 Tyres: L = pneumatic, V = solid, SE = Pneumatic Shape Solid 3.2 Tyres size, front 3.3 Tyres size, rear 3.5 Wheels, number front / rear (x = driven wheels) 3.6 Tread, front b Tread, rear b 11 L L PR PR PR PR x 4 2 x 4 2 2,279 2,279 2,381 2,381 L L L L L PR PR PR PR PR PR PR PR PR PR 3.3 x 4 2 x 4 2 x 4 2 x 4 2 x ,424 2,424 2,424 2,424 2, ,338 2,338 2,338 2,338 2, TYRES & CHASSIS DIMENSIONS 4.1 Tilt of mast, forward / backward a / b ( ) 4.2 Height, mast lowered m ** 4.5 Height, mast extended 4.7 Cab (open cab) *** h Height of overhead guard (closed cab) h Height of overhead guard (closed cab w/ airco) h Height of overhead guard (closed cab w/ strobe light) h Height of overhead guard (closed cab w/ work lights) h Height of overhead guard (closed cab w/ airco & strobe light) h Seat relating to SIP Coupling Overall length l Length to face of forks I l Overall width across all b Fork dimensions ISO 2331 s/e/l 4.23 Fork carriage type 4.24 Fork carriage width b Distance over fork arms, minimum / maximum b Distance over fork arms, minimum / maximum / b width over forks b Ground clearance, laden, below mast m Ground clearance, centre of wheelbase m Load dimension b 12 crossways b Aisle width for pallets crossways without operating clearance Ast Aisle width for pallets crossways wit00 mm operating clearance Ast Aisle width for pallets crossways wit0% operating clearance Ast Load dimension b 12 crossways b Aisle width for pallets crossways without operating clearance Ast Aisle width for pallets crossways wit00 mm operating clearance Ast Aisle width for pallets crossways wit0% operating clearance Ast 4.35 Turning radius Wa 4.36 Internal turning radius b ,099 4, ,265 4,265 6,231 6,231 3,370 3,370 3,406 3,406 3,439 3,439 3,538 3,538 3,597 3,597 3,612 3,612 2,237 2, ,321 8,981 5,881 6,541 3,220 3, Dual Function Dual Function Sideshift & Fork Positioning Sideshift & Fork Positioning Hook type Hook type 3,040 3,040 1,430 2,970 1,430 2, , ,420 +/-385 2,200 +/-385 2, ,800 1,800 1,800 1,800 8,315 9,174 8,515 9,374 9,147 10,091 2,400 2,400 2,400 2,400 8,915 9,774 9,115 9,974 9,807 10,751 5,326 6,185 2,040 2, ,224 4,224 4,224 4,224 4, ,265 4,265 4,265 4,265 4, ,356 6,356 6,356 6,356 6, ,466 3,466 3,466 3,466 3, ,502 3,502 3,502 3,502 3, ,535 3,535 3,535 3,535 3, ,634 3,634 3,634 3,634 3, ,693 3,693 3,693 3,693 3, ,708 3,708 3,708 3,708 3, ,333 2,333 2,333 2,333 2, ,031 1,031 1,031 1,031 1, ,066 8,686 9,066 8,686 9, ,626 6,246 6,626 6,246 7, ,430 3,430 3,430 3,430 3, Dual Function Dual Function Dual Function Dual Function Dual Function Sideshift & Fork Positioning Sideshift & Fork Positioning Sideshift & Fork Positioning Sideshift & Fork Positioning Sideshift & Fork Positioning 4.23 Hook type Hook type Hook type Hook type Hook type 3,200 3,200 3,200 3,200 3, ,480 3,140 1,480 3,140 1,480 3,140 1,480 3,140 1,480 3, , , , , , /-415 2,310 +/-415 2,310 +/-415 2,310 +/-415 2,310 +/-415 2, ,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1, ,259 8,765 9,259 8,765 9, ,459 8,965 9,459 8,965 10, ,185 9,642 10,185 9,642 10, ,400 2,400 2,400 2,400 2,400 2,400 2,400 2,400 2,400 2, ,859 9,365 9,859 9,365 10, ,059 9,565 10,059 9,565 10, ,845 10,302 10,845 10,302 11, ,185 5,691 6,185 5,691 6, ,589 2,273 2,589 2,273 3, DIMENSIONS PERFORMANCE DATA 5.1 Travel speed, laden / unladen km/h 5.2 speed, laden / unladen m/s speed, laden with 70% load m/s 5.3 Lowering speed, laden / unladen m/s 5.5 Drawbar pull, laden / unladen ] kn Drawbar pull, laden / unladen 6 kn 5.7 Gradeability, laden / unladen ] % Gradeability, laden / unladen 6 % PERFORMANCE DATA ADDITIONAL DATA 10.1 Working pressure for attachments bar 10.2 Oil volume for attachments l/min 10.3 Hydraulic oil tank, capacity l 10.4 Fuel tank, capacity l DEF tank, capacity (Stage IV / Tier 4 only) l 10.5 Steering design 10.6 Number of steering rotation 10.7 Sound pressure level at the driver s seat LpAZ db (A) Sound power level during the workcycle LwAZ 10.8 Towing coupling, type DIN Hydraulic power steering Hydraulic power steering 6 6 Yes / Pin Yes / Pin Hydraulic power steering Hydraulic power steering Hydraulic power steering Hydraulic power steering Hydraulic power steering Yes / Pin Yes / Pin Yes / Pin Yes / Pin Yes / Pin 10.8 ADDITIONAL DATA Specification data is based on VDI

3 TRUCK DIMENSIONS CAPACITY RATINGS l Q α~ β~ s m 1 m 2 c x y l 2 l 1 h 7 0 FORK LIFT TRUCKS h 6 Rated load STANDARD PIN TYPE CARRIAGE 34,000 32,000 30,000 28,000 26,000 24,000 22,000 20,000 18,000 16, SIDESHIFT PIN TYPE CARRIAGE Rated load 34,000 32,000 30,000 28,000 26,000 24,000 Load centre H32XM-12 H30XM-12 H28XM-12 H32XMS-9 H30XMS-9 Load centre: Distance from front of forks to centre of gravity of load. Rated Load: Based on mast 6095 mm lift Standard pin type carriage with 105 x 280 x 2440 forks on H25XM models and 105 x 300 x 2440 forks on H28-32XM models. EQUIPMENT AND WEIGHT FORK LIFT TRUCKS: l Weights (line 2.1) are based on the following specifications: Complete truck with Pneumatic tyres, 4265 mm BOF (4370 mm TOF) 2-Stage Vista, Dual-function Sideshift-forkpositioners carriage and Hook-type forks 2440 mm long. NOTES: Specifications are affected by the condition of the vehicle and how it is equipped, as well as the nature and condition of the operating area. Inform your dealer of the nature and condition of the intended operating area when purchasing your Hyster Truck. m Unladen with new tyres Bottom of forks Full suspension seat in depressed position I Length without carriage / spreader / Forks in alternative position Distance centre truck to centre of internal turning radius ] at 1.6 km/h. 6 at stall. Gradeability figures are provided for com parison of tractive performance, but are not intended to endorse the operation of vehicle on the stated inclines. Follow instructions in the operating manual regarding operation on inclines. Measured according to the test cycles and based on the weighting values contained in EN a/2 e l x a/2 22,000 20,000 18,000 Load centre 16, Load centre: Distance from front of forks to centre of gravity of load. H32XM-12 H30XM-12 H28XM-12 H32XMS-9 H30XMS-9 Rated Load: Based on mast 6095 mm lift Sideshift pin type carriage with 105 x 280 x 2440 forks on H25XM models and 105 x 300 x 2440 forks on H28-32XM models. b 2 b 3 b 10 b 11 DF-SS-FP CARRIAGE 34,000 b 13 A st = Centre of gravity of unladen truck A ST = W a + x + l 6 + a (IF b 12 /2 < b 13 ) A ST = W a + (l 6 - x) 2 + (b 12 - b 13 ) 2 + a (IF b 12 /2 > b 13 ) a = Minimum operating clearance = 10% of A ST (VDI standard = 200 mm, BITA recommendation = 300 mm) l 6 = Load length b 12 = Load width W a Rated load 32,000 30,000 28,000 26,000 24,000 22,000 20,000 18,000 16, Load centre H32XM-12 H30XM-12 H28XM-12 H32XMS-9 H30XMS-9 Load centre: Distance from front of forks to centre of gravity of load. Rated Load: Based on mast 6095 mm lift DF-SS-FP carriage with 105 x 280 x 2440 forks on H25XM models and 105 x 300 x 2440 forks on H28-32XM models. NOTICE: Care must be exercised when handling elevated loads. When the carriage and/or load is elevated, truck stability is reduced. It is important that the mast tilt in either direction is kept to a minimum when loads are elevated. Operators must be trained and must read, understand and follow the instructions contained in the Operating Manual. All values are nominal values and they are subject to tolerances. For further information, please contact the manufacturer. Hyster products are subject to change without notice. trucks illustrated may feature optional equipment. Values may vary with alternative configurations. Safety: This truck conforms to the current EU requirements. 4 5

4 MAST AND CAPACITY INFORMATION MAST AND CAPACITY INFORMATION Mono Integrated Coil ram with +/-250 mm side shift Pin Type Side Shift carriage mounted coil ram 2,745 5,169 2,745 5,169 30,000 6 / 10 25,000 6 / 10 2,745 5,169 2,745 5,169 30,000 6 / 10 25,000 6 / 10 H28XM-12 2,745 5,265 2,745 5,265 36,000 6 / 10 32,000 6 / 10 H30XMS-9 2,745 5,265 2,745 5,265 36,000 6 / 10 32,000 6 / 10 H32XMS-9 2,745 5,265 2,745 5,265 36,000 6 / 10 32,000 6 / 10 H32XM-12 2,745 5,265 2,745 5,265 36,000 6 / 10 32,000 6 / 10 NOTES FORKLIFT TRUCKS Capacities are valid for complete trucks with Pneumatic tyres, 2-Stage Vista mast with lift as specified, Dual-function Hook-type Sideshift-Forkpositioning carriage and Quick-disconnect Hook-type forks 2440 mm long. u Carriage with ZERO IN-TO-IN fork positioning not recommended in combination with lift s above 6200 mm H30XM MM MM out 2,850 3, ,836 30,000 6 / 10 27,000 30,000 6 / 10 27,000 3,155 3, ,141 30,000 6 / 10 27,000 30,000 6 / 10 27,000 3,760 3, ,746 30,000 6 / 10 26,940 30,000 6 / 10 26,940 4,370 4, ,356 30,000 6 / 10 26,880 30,000 6 / 10 26,880 6,200 5, ,186 30,000 6 / 10 26,620 30,000 6 / 10 26,620 6,810 5, ,716 29,840 6 / 10 26,420 29,840 u 6 / 10 26,420 u 9,250 7, ,746 28,880 6 / 6 25,360 28,880 u 6 / 6 25,360 u NOTES FORKLIFT TRUCKS Capacities are valid for complete trucks with Pneumatic tyres, 2-Stage Vista mast with lift as specified, Dual-function Hook-type Sideshift-Forkpositioning carriage and Quick-disconnect Hook-type forks 2440 mm long. u Carriage with ZERO IN-TO-IN fork positioning not recommended in combination with lift s above 6200 mm 900 MM MM 9,860 7, ,356 28,580 6 / 6 25,120 28,580 u 6 / 6 25,120 u out 3,155 3, ,016 25,000 6 / 10 22,700 25,000 6 / 10 22,700 3,760 3, ,621 25,000 6 / 10 22,640 25,000 6 / 10 22,640 4,370 4, ,231 25,000 6 / 10 22,600 25,000 6 / 10 22,600 4,980 4, ,841 25,000 6 / 10 22,540 25,000 6 / 10 22,540 6,200 5, ,061 25,000 6 / 10 22,400 25,000 6 / 10 22,400 9,250 6, ,111 23,720 6 / 6 21,000 20,520 u 6 / 6 21,000 u H30XM MM MM out 2,850 3, ,836 32,000 6 / 10 30,000 32,000 6 / 10 30,000 3,155 3, ,141 32,000 6 / 10 30,000 32,000 6 / 10 30,000 3,760 3, ,746 32,000 6 / 10 30,000 32,000 6 / 10 30,000 4,370 4, ,356 32,000 6 / 10 30,000 32,000 6 / 10 30,000 6,200 5, ,186 32,000 6 / 10 30,000 32,000 6 / 10 30,000 H25XMS MM 6,810 5, ,716 31,840 6 / 10 29,840 31,840 6 / 10 29,840 9,250 7, ,746 31,100 6 / 6 29,000 31,100 u 6 / 6 29,000 u out 3,155 3, ,016-6 / 10 25,000-6 / 10 25,000 3,760 3, ,621-6 / 10 25,000-6 / 10 25,000 4,370 4, ,231-6 / 10 25,000-6 / 10 25,000 4,980 4, ,841-6 / 10 25,000-6 / 10 25,000 6,200 5, ,061-6 / 10 25,000-6 / 10 25,000 9,250 6, ,111-6 / 6 23,720-6 / 6 20,300 u 9,860 7, ,356 30,880 6 / 6 29,680 29,840 u 6 / 6 28,720 u H32XM MM MM out 2,850 3, ,836 32,000 6 / 10 28,680 32,000 6 / 10 28,680 3,155 3, ,141 32,000 6 / 10 28,640 32,000 6 / 10 28,640 3,760 3, ,746 32,000 6 / 10 28,560 32,000 6 / 10 28,560 H28XM MM MM 4,370 4, ,356 32,000 6 / 10 28,500 32,000 6 / 10 28,500 6,200 5, ,186 32,000 6 / 10 28,240 32,000 6 / 10 28,240 out 6,810 5, ,716 31,840 6 / 10 28,040 31,840 6 / 10 28,040 9,250 7, ,746 30,020 6 / 6 26,360 30,020 u 6 / 6 26,360 u 9,860 7, ,356 29,420 6 / 6 26,160 29,420 u 6 / 6 26,120 u 2,850 3, ,836 31,860 6 / 10 28,000 31,860 6 / 10 28,000 3,155 3, ,141 31,860 6 / 10 28,000 31,860 6 / 10 28,000 3,760 3, ,746 31,860 6 / 10 28,000 31,860 6 / 10 28,000 4,370 4, ,356 31,860 6 / 10 28,000 31,860 6 / 10 28,000 6,200 5, ,186 31,860 6 / 10 28,000 31,860 6 / 10 28,000 6,810 5, ,716 31,700 6 / 10 27,860 31,700 6 / 10 27,860 9,250 7, ,746 30,920 6 / 6 27,180 30,920 u 6 / 6 27,180 u 9,860 7, ,356 30,600 6 / 6 26,900 29,660 u 6 / 6 26,900 u H32XM MM MM out 2,850 3, ,836-6 / 10 32,000-6 / 10 32,000 3,155 3, ,141-6 / 10 32,000-6 / 10 32,000 3,760 3, ,746-6 / 10 32,000-6 / 10 32,000 4,370 4, ,356-6 / 10 32,000-6 / 10 32,000 6,200 5, ,186-6 / 10 32,000-6 / 10 32,000 6,810 5, ,716-6 / 10 32,000-6 / 10 32,000 9,250 7, ,746-6 / 6 31,020-6 / 6 31,020 9,860 7, ,356-6 / 6 30,720-6 / 6 29,

5 POWERTRAINS FRONT END EQUIPMENT POWER UNIT DESIGNATION 1.1 Manufacturer (abbreviation) 1.2 Manufacturer s type designation 1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas 7.1 Engine manufacturer / type 7.2 Engine output according to ISO 1585 kw / min Max. engine power according to ISO 1585 kw / min Rated speed min Torque at 1/min Nm / min Number of cylinders / displacement (-)/cm Fuel consumption according to VDI cycle l/h Alternator A 7.10 Battery voltage/nominal capacity (V)/(Ah) -H25XMS-12 H28XM-H32XM-12 Cummins QSB 6.7 Cummins QSB , , , ,000 2,000 2, , , , ,690 On request On request DRIVE TRAIN 8.1 Type of drive unit 8.2 Transmission manufacturer / type 8.6 Wheel drive / drive axle manufacturer / type 8.4 Service brake 8.5 Parking brake Torque Converter ZF / 5WG211 Axle Tech / PRLC1794W4H Oil immersed disc Dry disc on drive axle Torque Converter ZF / 5WG211 Axle Tech / PRC3806W4H Oil immersed disc Dry disc on drive axle mm wide hook type mount Dual Function carriage with Side shift and Fork Positioning Individual Fork Control Hook type forks mm wide hook type mount Dual Function carriage with Side shift and Fork Positioning Individual Fork Control Hook type forks FRONT END EQUIPMENT mm wide Multi Purpose Dual Function carriage with Side shift and Fork Positioning Individual Fork Control Hook type forks mm wide Multi Purpose Dual Function carriage with Side shift and Fork Positioning Individual Fork Control Hook type forks Range of masts Pin Type and Quick Disconnect Hook Type forks Mono Integrated Coil ram carriage mm wide Standard Carriage Pin type forks mm wide Carriage with Fork Positioning Individual Fork Control Pin type forks mm wide Side shift frame carriage Pin type forks mm wide Side shift frame carriage with Fork Positioning Individual Fork Control Pin type forks Side shift frame pin type mount Integrated Coil Ram carriage Coil ram 8 9

6 STANDARD EQUIPMENT OPTIONAL EQUIPMENT n Cummins QSB 6.7L 194 / max rpm Turbo Engine Stage IV Compliant ECO-eLo / HiP performance modes Hibernate Idle Cooling fan with fan clutch n ZF WG speed forward / 3 speed reverse Hydrodynamic Transmission n with maximum fork of 3655mm wit794mm overall lowered (H25XM) n with maximum fork of 3655mm wit919mm overall lowered (H28-32XM) n 3040 mm wide DF side shift & Fork positioning carriage, hook type mount (H25XM) n 3200 mm wide DF side shift & Fork positioning carriage, hook type mount (H28-32XM) n 280 x 105 x mm long hook type forks (H25XM) n 300 x 105 x mm long hook type forks (H28-32XM) n Oil-immersed Brakes n Sy-Klone spinner type heavy duty air intake pre-cleaner n Axle Tech PRC 1794 heavy duty planetary drive axles (H25XM) n Axle Tech PRC 3806 heavy duty planetary drive axles (H28-32XM) n Steer axle with hydrostatic power steering n SAUER-DANFOSS dual piston variable displacement pump 165 ccm ( ccm) n Powertrain protection system for engine and transmission; high temperature or low oil pressure n On-demand load-sensing hydraulic system featuring VDP technology n Up to 6-way hydraulic controls wit Levers and Switch combination n CANbus electrical control system for engine, transmission and hydraulics n PR bias ply treaded load pneumatic drive and steer tyres (H25XM) n PR bias ply treaded PR E4 load pneumatic drive and steer tyres (H28-32XM) n Directional control lever with direction change interlock system n : 6 forward / 10 back n 120 amp alternator n Overhead Guard Featuring: Seatside lever and switch hydraulic control Multifunction display panel Interior wide angle mirrors Handrails for operator entry and exit Telescoping and tilting steering column Floor mat Isolated mounting for low noise and vibration Mechanical, Full Suspension Vinyl or Cloth Seat with integrated adjustable armrest and orange Hi-Vis seat belt Exterior wide angle mirrors, mounted to handrails n Operator restraint system n Operator presence system n Electronic horn db(a) n Visible alarm / amber strobe light n Self adjustable back up alarm, volume > 5dB(A) ambient n 24V electrical system n Manual Tilt Operator Compartment for Service Access n Light Kit 1: LED rear cluster with stop, reverse and direction light 2 x Halogen working lights mounted on rear of the cab 2 x Halogen drive lights, 2 LED direction / marker lights mounted on front fender n Steering wheel with spinner knob n Steer wheel nut protection n Non-lockable diesel fuel cap n Literature package: - operator s manual n 12 months / 2,000 hours manufacturer s warranty n s: various 2-stage NFL masts with various lift s available n Mono mast with maximum lift of 2.745mm with 5169mm overall lowered (H25XM) n Mono mast with maximum lift of 2.745mm with 5265mm overall lowered (H28-32XM) n Various side shifting carriages and fork positioners n Coil Ram - pin carriage mounted or hook carriage mounted n Various hydraulic valve control groups n Multifunction joystick control n MONOTROL pedal direction control with direction change interlock system n : 15 forward / 10 back n Tyres Drive and Steer Solid (H25XM) R24 MICHELIN XZM radial (H25XM) R24 Trelleborg radial (H25XM) Solid (H28-32XM) R25 MICHELIN XZM radial (H28-32XM) R25 GOODYEAR EV-4S Slick (H28-32XM) n Front and rear mud flaps n Enclosed Cab with or without Air Conditioning includes: Seat-Side Hydraulic Control Levers Multifunction Display Panel Interior Wide Angle Mirrors Telescoping & Tilting Steering Column Floor Mat 24-12V DC/DC Converter I - style Front screen Wiper H - style Front screen Wiper Heater n Cab options Air conditioner, manual controlled Air conditioner, automatically controlled High Performance Air conditioner, manual controlled High Performance Air conditioner, automatically controlled Reading light Top and rear sun shades Trainer seat Recirculation fan Engine start interlock Radio preparation, inclusive wire, two speakers and antenna Wire mesh protection guard on Top of cab Rain top for OHG n Seats Mechanical, Full Suspension High backrest Vinyl or Cloth Seat Pneumatic, Full Suspension Vinyl or Cloth Seat Pneumatic, Full Suspension High backrest Vinyl or Cloth Seat Deluxe Air Suspended Full Suspension Cloth Seat Heated Deluxe Air Suspended Full Suspension Cloth Seat n 3-point seat belt for Deluxe Seat n Powered Tilt Operator Compartment n Air Horn n Various Light Kits n Various HID (High Intensity Discharge - Xenon) and halogen light kits available n Hydraulic accumulator in lift circuit n Hydraulic temperature protection n Pressure compensated lowering n ing eye shackles n Engine pre-heater W / 230 Volt AC n NATO Start aid connector (24V) n indicator n Traction speed limiter n Empty seat engine shutdown n Lockable diesel fuel cap n Automatic greasing system n Centralized greasing provision for mast chain sheaves (available on limited masts) n Hyster Tracker Wireless Asset Management system Other options available through Special Products Engineering Department (SPED). Contact Hyster for details. n Lockable battery disconnect switch IT console for on-board computer Rear locking console Heated Top Window 10 11

7 TM STRONG PARTNERS. TOUGH TRUCKS. FOR DEMANDING OPERATIONS, EVERYWHERE. Hyster supplies a complete range of warehouse equipment, IC and electric counterbalanced trucks, container handlers and reach stackers. Hyster is committed to being much more than a lift truck supplier. Our aim is to offer a complete partnership capable of responding to the full spectrum of material handling issues: Whether you need professional consultancy on your fleet management, fully qualified service support, or reliable parts supply, you can depend on Hyster. Our network of highly trained dealers provides expert, responsive local support. They can offer cost-effective finance packages and introduce effectively managed maintenance programmes to ensure that you get the best possible value. Our business is dealing with your material handling needs so you can focus on the success of your business today and in the future. EUROPE Centennial House, Frimley Business Park, Frimley, Surrey, GU16 7SG, England. Tel: +44 (0) 1276 f infoeurope@hyster.com /HysterEurope -YALE UK LIMITED trading as Hyster Europe. Registered Address: Centennial House, Building 4.5, Frimley Business Park, Frimley, Surrey, GU16 7SG, United Kingdom. Registered in England and Wales. Company Registration Number: , and FORTENS are registered trademarks in the European Union and certain other jurisdictions. MONOTROL is a registered trademark, and DURAMATCH and are trademarks in the United States and in certain other jurisdictions. Hyster products are subject to change without notice. trucks illustrated may feature optional equipment. Printed in Netherlands. Part Number: Rev.0-01/16- TLC