Single Axle Converter Dolly MODEL VAST - 20

Transcription

1 Single Axle Converter Dolly MODEL VAST - 20 The Silver Eagle Value Added (VA) converter dolly is the finest on the market today. It builds on traditional excellence of our A-type dolly products to deliver the performance and reliability you need for double and triple trailer applications. Easiest Handling Our innovative frame and drawbar design is field adjustable should a different drawbar length be required. Low tongue lift weight. Highest Stability Our transverse spring assembly and no-slack suspension improve safety by reducing freeplay and roll movement. Lowest Maintenance The bolted drawbar and rubber or urethane mounted drawbar eye are easily repaired or replaced - without cutting or welding. Best Tracking Direct axle pull assures constant alignment and eliminates spring windup during braking. Updated Page 1 of 13

2 Value Added Converter Dolly Model VAST - 20 Contents Page Technical Data Exploded Parts View - Frame Assembly Frame Parts List Jack Parts List Electrical System Parts List Fifth Wheel Parts List Suspension Parts List Axle Frame Parts List Air System Parts List Air System Schematic Silver Eagle Manufacturing A full line of converter dolly and trailer suspension products. In this catalog section you will find exploded parts views and parts list. To ensure your order or quotation is properly handled, we have included forms in the order information section. Your completed forms can be sent by fax, mailed or phoned in directly for immediate processing. Page 2 of 13 Updated

3 Value Added Converter Dolly Model VAST - 20 Standard Specifications Frame Formed steel channel. 76" center of drawbar eye to center of axle. Drawbar eye is rubber mounted in a steel shock housing. Drawbar set for 34" hitch height. Fifth Wheel Axle Hubs 36" fabricated steel table with cast steel center section. Roadside release handle. Fifth wheel mounted directly over centerline of axle. Meritor TN 4671, 5" round with N-spindles. 22,500 lbs installed to set toe-in at 1/16". 71-1/2 track for 96" wide trailers. Cast steel hubs for ten stud disc wheels and outboard mount cast iron brake drums. Brakes 16-1/2" x 7" Meritor Q series, S- cam air brakes with nonasbestos lining and ABS. Type 30 service chambers with stroke indicators. Automatic slack adjusters. Suspension Paint Air System: 7 -leaf, two stage springs with rebound leaves. Transverse mounted over axle. Spring eyes are secured in rubber mounting blocks. Frame & 5 th Wheel are steel shot blasted and treated with an eight stage cathodic electrodeposition epoxy primer (E-Coat). Top coat is Dupont Gray Centari Acrylic Enamel. ABS relay, emergency and pressure protection valves. Electrical Lamps: Two 12 volt, rubber grommet mounted 4" stop and tail lamps mounted on rear frame. Harness: ABS sealed modular harness with rear trailer lead and replaceable receptacle. Heavy duty 12' straight cable. Tires Goodyear G114 LP, 295/75R 22.5 low profile steel radial, load range G. Wheels Misc. Weight: GVWR: 22.5" x 8.25" steel disc wheels, 10 stud ball seat mount. Prepainted white enamel. Handles: Two hinged handles welded at sides of drawbars. Mud flaps: Black plastic flaps with Silver Eagle logo, mounted on removable hangers. Support leg: Steel stiff leg with replaceable rubber footpad. Counterweight: Weighted tailframe to reduce drawbar pickup weight and allow easier servicing. 2,740 pounds 20,000 lbs. Updated Page 3 of 13

4 Model VAST- 20 Exploded Parts View Page 4 of 13 Updated

5 MODEL VAST - 20 Frame Assembly Item Part Nbr Description 1 Quote DRAWBAR KIT, CURBSIDE SAFETY WIRE ASSY ADAPTER, TAILPLATE, SPIN-AROUND TILTSTOP TAILPLATE WELDMENT, 4-LT + LIC LT, VA 5 Quote SIDE CHANNEL, SPECIFY LENGTH TANK BRACKET CROSSMEMBER GLADHAND HOLDER PLATE WLDMT, VA VALVE PLATE WELDMENT, JACK OR JAM EYE APPLICATION NUT, SHANK HEX WASHER, SHANK HEX BUSHING, SHOCK ABSORBER, RUBBER, VA, (2 PARI REQ'D) BUSHING, SHOCK ABSORBER, URETHANE, VA (2 PAIR REQ'D) DIVIDER WELDMENT, SHOCK HOUSING DIVIDER, SHOCK HOUSING VALVE PLATE W/E-COAT, STD, VA EYE & SHANK, 3/8" SHANK, HRND EYE NS 4529 EYE & SHANK, 3/8" SHANK, HRND JAM EYE EYE & SHANK ASSY, 3/8" SHANK, HRND EYE, WITH 1283 NUT NS AIR JAM EYE, ROD & SHOE RETROFIT KIT NS 2705 ROLL PIN, JAM EYE SHOE NS MOUNT WELDMENT, AIR CHAMBER, JAM EYE NS 3481 NUT, JAM EYE & SHANK, WITH CAP NS 2861 AIR CHAMBER, TYPE 24, JAM EYE NS 3529 NUT, 5/8-18 UNF X 2-1/8, COUPLING, PLTD, JAM EYE NS 1851 NUT, 5/8-18 UNF, JAM, HX, GR 2, PLTD, JAM EYE SUPPORT LEG WELDMENT WITH FOOT RUBBER PAD, BOLT-ON, SUPPORT LEG 17 Quote DRAWBAR KIT, ROADSIDE TILTSTOP, SPIN-AROUND BALLAST KIT, 10# BALLAST KIT, 20# Updated Page 5 of 13

6 Model VAST - 20 Frame Assy. Item Part Nbr Description BALLAST KIT, 30# BALLAST KIT, 40# SAFETY CHAIN ASSY, 1/2", RT U-BOLT, W/5 TON CL HOOK NUT, 5/8-11 UNC, METAL LOCK, HX, GR C, PLTD U-BOLT, KIT, RT, ZINC CHROMATE, SAFETY CHAIN CHAIN, 1/2", ZINC CHROMATE NS 7655 U-BOLT KIT, RT, SAFETY CHAIN WASHER, 5/8, FLAT, F436, HRND, PLTD HOOK, 5-TON, W/SAFETY LATCH PAINT PROTECTOR, SAFETY CHAIN LINK, LOCKING, 1/2, GR HANDLE ASSY, HINGED, UNDER OR SIDE MOUNTED NS SAFETY LATCH, 5 TON HOOK NS 5317 LINK, LOCKING, 3/4", GR 8 Page 6 of 13 Updated

7 MODEL VAST - 20 Jack Item Part Nbr. Description JACK ASSEMBLY, FIXED, HEIGHT RANGE JACK ASSEMBLY, FIXED, HEIGHT RANGE JACK ASSEMBLY, FIXED, HEIGHT RANGE SUPPORT PLATE, FIXED JACK RUBBER, FIXED JACK CASTER W/6" WHEEL CAPSCREW, 3/8-16 UNC X 1-1/4, HX GR 5, PLTD CAPSCREW, 3/8-16 UNC X 2-3/4, HX GR 5, PLTD NUT, 3/8-16 UNC, METAL LOCK, HX, GRC, PLTD WASHER, 3/8, SAE, PLTD NS JACK ONLY WELDMENT, FIXED, HEIGHT RANGE NS JACK ONLY WELDMENT, FIXED, HEIGHT RANGE NS JACK ONLY WELDMENT, FIXED, HEIGHT RANGE Updated Page 7 of 13

8 MODEL VAST - 20 Electrical Item Part Nbr. Description HARNESS, FRONT WYE, SEALED, 132" ABS LENS, AMBER, TRUCKLITE, ABS GROMMENT, LAMP, TRUCKLITE, MODEL CABLE, 7-WAY, COILED 12', W/PLUGS, ABS HARNESS, REAR, 2-LIGHT HARNESS, REAR, 4-LIGHT LAMP, RED, GROTE GROMMET, LAMP, GROTE REFLECTOR, 4" RED NS CABLE, ABS POWER, 18", MERITOR/WABCO NS CABLE, ABS SENSOR EXTENSION, 6' NS CABLE, ABS SENSOR, 1', MERITOR/WABCO NS CLIP, ABS WHEEL SPEED SENSOR, MERITOR/WABCO Page 8 of 13 Updated

9 Item Part Nbr. Description MODEL VAST - 20 Fifth Wheel TRIP BLOCK KIT, RH, W/SPRING & FASTENERS TRIP BLOCK KIT, LH, W/SPRING & FASTENERS TH WHEEL TABLE ASSY, LH RELEASE, (ROADSIDE) TH WHEEL TBL ASSY 10D FRONT PULL LH TH WHEEL TABLE ASSY, RH RELEASE, (CURBSIDE) NUT, 1/2-13 UNC, TOP LOCK, JAM, HX, GR 5, PLTD JAW ASSY, HUCKED PUSHROD, LH JAW ASSY, HUCKED PUSHROD, RH LEVER, JAW, LH LEVER, JAW, RH WASHER, 1/2, FLAT, SAE, PLTD NUT, 1/2-13 UNC, HX, FIN, GR 5, PLTD SPRING, JAW, 12-3/8" CAPSCREW, 1/2-13 UNC X 2-1/4, HX, GR 5, PLTD HANDLE, PULL, LH, 36" TABLE LEVER, 5TH WHEEL,FRONT PULL,RS HANDLE, PULL, RH, 36" TABLE GUIDE, PUSHROD SPRING, TRIP BLOCK NS TH WHEEL SERVICE KIT, LH NS TH WHEEL SERVICE KIT, RH 5TH WHEEL SERVICE KIT COMPONENTS P/N LH P/N RH 1- TRIP BLOCK SPRING 1- TRIP BLOCK 1- JAW W/HUCKED PUSHROD 1- JAW SPRING 1- CAPSCREW, 3/8 X 5 1- CAPSCREW, 1/2 X 2-1/4 2- NUT, 1/2, TOP LOCK 1- NUT, 3/8, METAL LOCK 2- WASHER, 1/2, FLAT Updated Page 9 of 13

10 FRONT PULL 5 TH WHEEL SERVICE KIT FIFTHWHEEL TH WHEEL TABLE ASSY, LH RELEASE, (ROADSIDE) FRONT PULL HANDLE (7-LEAF) TRIP BLOCK KIT, LH, W/SPRING & FASTENERS, ROADSIDE NUT, 1/2-13 UNC, TOP LOCK, JAM, HX, GR 5, PLTD JAW ASSY, HUCKED PUSHROD, LH LEVER, JAW, 5 TH WHEEL, FRONT PULL, ROADSIDE WASHER, 1/2, FLAT, SAE, PLTD NUT, 1/2-13 UNC, HX, FIN, GR 5, PLTD SPRING, JAW, 12-3/8" CAPSCREW, 1/2-13 UNC X 2-1/2, HX, GR 8, PLTD GUIDE, PUSHROD LEVER BUSHINGS SECURITY SPRING FOR LEVER W/POST & FASTENERS LEVER ADJUSTER KIT 12

11 TH WHEEL SERVICE KIT COMPONENTS 1- TRIP BLOCK SPRING 1- TRIP BLOCK 1- JAW W/HUCKED PUSHROD 1- JAW SPRING 1- CAPSCREW, 3/8 X 5 1- CAPSCREW, 1/2 X 2-1/2 2- NUT, 1/2, TOP LOCK 1- NUT, 3/8, METAL LOCK 2- WASHER, 1/2, FLAT 2- WASHER, 3/8 13

12 2- WASHER, 3/8 MODEL VAST - 20 Suspension Item Part Nbr Description BUSHING, SPRING BOOT, RUBBER, PAIR BUSHING, SPRING BOOT URETHANE, PAIR U-BOLT ASSY, 1 X 4 X 8, RT, W/NUTS & WASHERS SPRING ASSY, 7 LEAF W/ LONG REBOUND PRESSURE PLATE, 4", CTR HOLE,CURVED, DUCTILE DOUBLE BOOT HOUSING, DUCTILE IRON A CAPSCREW, 5/8-11 UNC X 2-1/2, HX, GR 5, PLTD WASHER, 5/8, FLAT, F436, HRND, PLTD NUT, 5/8-11 UNC, METAL LOCK, HX, GR C, PLTD Page 10 of 13 Updated

13 MODEL VAST - 20 Axle/Frame Item Part Nbr. Description SPACER, UPPER, SIDE SUPPORT ASSY INNER SUPPORT, AXLE CLAMP, VA CAPSCREW, 7/8-14 UNF X 2-3/4, HX, GR 8, PLTD NUT, 7/8-14 UNF, HX, GR 8, PLTD WASHER, 7/8, FLAT, A325 (F436), HRND, PLTD SPACER, LOWER, SIDE SUPPORT ASSY SPRING, PLATE, SIDE SUPPORT ASSY OUTER SUPPORT, AXLE CLAMP.VA CAPSCREW, 3/4-16 UNF X 2-1/4, HX, GR 8, PLTD NUT, 3/4-16 UNF, METAL LOCK, HX, GR 8, PLTD WASHER, 3/4, FLAT, F436, HRND, PLTD 12 Quote AXLE SEAT WELDMENT, CUSTOMER DEPENDENT NS 2421 AIR CHAMBER, RH, TYPE 30 NS 2422 AIR CHAMBER, LH, TYPE 30 NS 1990 OIL SEAL, "SCOTSEAL", CHICAGO RAWHIDE NS 1986 OIL SEAL, A NATIONAL NS 1989 HUB CAP, SILVER EAGLE LOGO NS 1987 GASKET, HUB CAP NS 3995 MAGNETIC PLUG, 3/8 NPT, HUB CAP INSERT NS 3536 SLACK ADJUSTER, AUTOMATIC, 5-1/2", MERITOR NS 1992 WHEEL BEARING, INNER NS 1993 WHEEL BEARING, OUTER NS 5333 WHEEL BEARING, "P" TYPE, INNER/OUTER NS Quote HUB & DRUM ASSY, RH NS Quote HUB & DRUM ASSY, LH Updated Page 11 of 13

14 MODEL VAST - 20 Air System Item Part No. Description HOSE, AIR, COILED, 12' WORKING LENGTH, 6"/12" PAIR GLADHAND, SERVICE, W/FULL FACE BLUE SEAL PRESSURE PROTECTION VALVE, PR-3, BENDIX VALVE, RELAY, R-12P WITH BRACKET VALVE, RELAY, ABS CONTROL, W/ CABLE MERITOR/WABCO VALVE, EMERGENCY CONTROL, SEALCO VALVE, CHECK, SC-3, 1/2" NPT, BENDIX VALVE, ONE-WAY CHECK, SEALCO AIR RESERVOIR, SIDE DRAIN, PDR COAT, MIDWEST, 1425 CI GLADHAND, EMERGENCY, W/FULL FACE RED SEAL HOSE, AIR, 3/8 X 49, RUBBER, 1/4 X 1/2 CONN (Other Sizes Available) NS 1771 VALVE, CABLE DRAIN, 1/4" NPT NS 9857 VALVE, CONTROL LINE, SEALCO NS 1775 VALVE, DRAIN, LEVER, 150 PSI, 1/4" NPT-M NS 6294 VALVE, PRESSURE PROTECTION, PR-3 BENDIX NS 1278 VALVE, PUSH-PULL, PP-1 NS 5981 VALVE, QR-N, W/O BRACKET NS 6302 VALVE, SYNCHRO, SV-4, W/BREATHER & CHECK VALVE NS HARNESS, ABS, MIDLAND NS ECU PIGTAIL FOR MC30 W/DIAGNOS CONN, HARNESS NS 1181 BULKHEAD FITTING, BRASS NS 8818 DELAY CHAMBER Page 12 of 13 Updated

15 Model VAST - 20 Updated Page 13 of 13