50 TRUNK F154 F182 F155 F156 F159 F157

Transcription

1 50 TRUNK TM60FAPLS TM64FAPLS TM64CSPS TM66FAPLS Plaid Trunk Mat Material Speckle Trunk Mat Material Trunk Mats NOTE: When test-fitting mats, please use a sheet or some other barrier between the mat and the trunk floor. Mats with soiled backing cannot be returned. Standard Felt-backed vinyl. Available in plaid or speckle pattern. Add PLS to end of part number for plaid, SPS for speckle Falcon... TM60FA...ea Comet.... TM61C...ea Falcon... TM64FA...ea Comet.... TM64C...ea TM66FA...ea Cross-Section of 72X48 72X48 72X48BF Heat Shield and Sound Deadener This quality heat shield insulation gives owners the opportunity to use space-age technology in keeping heat and noise out of their driving and listening environment. Consists of one sheet of 99.5% pure industrial grade aluminum laminated to 3 8 " padding, achieving the highest reflection of heat and sound deadening-capabilities when placed with the aluminum side toward the heat and / or noise source. 72" 48" sheet... 72X48...ea Cross-Section of 72X48BF Insulator and Sound Deadener with Bubble Film This reflective foil insulation consists of two layers of polyethylene bubble film sandwiched between two layers of 99.9% pure aluminum foil, making it 5 16 " thick. Temperature range from 60º F to 180º F. Works great for insulating headliners, floor pans, trunk area, door panels, kick panels, etc. Cut and form into needed shapes using scissors and apply with contact cement or weatherstrip adhesive. 72" 48"... 72X48BF...ea FatMat Rattle Trap Sound Deadener 50 Sq. Ft. This bulk roll of sound deadener by FatMat is 50 square feet ( ' 18") 80 mil thick. Features self-adhesive backing that is very aggressive and can be installed at almost any temperature. This super-stick formula coating requires no heating to install and is great for exterior noise reduction, insulation, and improves sound system quality. Installation kit containing roller, cutting knife, and instruction sheet is included. Backed by the manufacturer s lifetime warranty.... RATPAK50...ea TM64FAPLP Premium Heavyweight felt-backed vinyl Comet. Speckle.... TM64CSPP...ea Falcon. Plaid... TM64FAPLP...ea F154 F156 F182 F155 Trunk Underlayment Sound Deadener Lays under the trunk mat, atop the fuel tank M147...ea Trim Adhesive Recommended for installation of carpet, headliners, upper quarter trim panels, hood insulation, trunk mats, etc. Also recommended for repair of sunvisors or any where you need a good adhesive. 16 oz. aerosol ea F157 F159 Trunk Filler Boards Falcon... F154...pr Comet hardtop, convertible, and S-22 sedan.... F182...pr Comet.... F156...pr Falcon... F155...pr Comet.... F157...pr Falcon... F159...pr Falcon... F160...pr ORDER TOLL TOLL-FREE

2 51 AK183C Trunk Board Installation Hardware Kits Hex head... AK183C...kit Phillips head... AK183B...kit Spare Tire Mounting Nuts Continued Except station wagon. 1 2 ". 13 thread... C8AZ-1462B...ea TRUNK F127 F128 FM182 F187 Rear Seat-Trunk Divider Boards NOTE: There is a $10.00 per order boxing fee for these items. 63 Convertible.... F127...ea Sedan.... F128...ea Hardtop.... F187...ea Convertible... FM182...ea TC TOTE TOTE-01 Tire Covers NOTE: Patterns do not necessarily match the patterns of trunk mats. NOTE: Tire covers were never OEM for Ford ". Plaid.... TC13...ea ". Speckle.... TCS13...ea ". Speckle.... TCS...ea ". Plaid.... TC...ea Tote Bags Approximately 20" 8". NOTE: Tote bags were never OEM for Ford. Plaid. NOTE: Pattern does not necessarily match the pattern of trunk mats.... TOTE...ea Black... TOTE-01...ea Spare Tire Mounting J-bolt Excellent quality reproduction. 9" long or 4-door sedan.... C6OZ-1448A...ea Remote Trunk Latch Release Manual OE style. Cable is 162" long. Includes instructions and all necessary hardware C4AZ-62432A00...ea Power OE Style OE Style Has the classic look of the remote cable style trunk release with a modern electric solenoid function, and has been designed to be simple to install. Very little, if any, modifications to the car is needed. Kit includes all the necessary parts and installation instructions or 4-door sedan.... C7AZ EL...ea Aftermarket Converts your manual trunk lock to a power system. Push-button operated and compatible with alarms for remote operation. Includes solenoid, wiring, mounting bracket, hardware, and instructions.... PT kit C4OB Trunk Latch Striker Plates Falcon 2- or 4-door sedan, hardtop, convertible; 65 Comet except station wagon. Zinc.... C4OB ea Chrome.... C4OB C...ea Spare Tire Mounting Nuts Falcon; Comet. 3 8 ". 16 thread.... B9AZ-1462A...ea C2OZ B C5AZ A Trunk Latches Falcon 2- or 4-door sedan, hardtop, convertible; 65 Comet except station wagon.... C2OZ B...ea or 4- door sedan... C5AZ A...ea

3 TRUNK / EXTERIOR 52 B9A A C2DZ B LCK17 LCK39 Trunk / Tailgate Lock Sets Includes 2 keys or 4-door sedan trunk. Reproduction... B9A A...set Falcon station wagon and sedan delivery tailgate; Falcon 2 or 4 door trunk.... C2DZ B...ea Falcon 2- or 4-door sedan and 2-door Futura sedan; 63 Falcon 2- or 4-door sedans and 2- or 4-door Futura sedan and convertible... LCK17...set Station wagon and sedan delivery. Tailgate only.... LCK17...set Comet station wagon tailgate Trunk... LCK39...set Trunk / Under-hood Hardware Kit Kit includes many of the nuts, bolts, washers, and screws necessary for exterior and under-hood applications. May include more hardware than necessary. Some items are not OEM but are guaranteed to fit pieces... FO kit Convertible Top Related CT63FA-01 Convertible Tops Our tops are among the finest available and carry a 5-year manufacturer s warranty. Made of 38 oz. material. Available in Black (01) or White (05) only. Please specify color by adding color code to the end of the part number when ordering Premium top with plastic window.... CT63FA-...ea Trunk Lock Sleeve Excellent reproduction with quality chrome plating. Threaded on one end. Includes gasket. 64 Except station wagon and sedan delivery.... C4DZ A...ea C2DZ A C4DZ A TP60GA WL2018 Convertible Top Pads Includes rear quarters. 75" long. Black TP60GA...pr Convertible Top Well Liners WL ea WL ea Trunk Lock Cylinder Pads sedan; 63 hardtop and convertible.... C2DZ A...ea C4DZ A...ea Trunk / Tailgate Lock Cylinder Retainer C5AZ A...ea Trunk Lid Adjustment Bumpers Includes threaded bolt C0DZ A...pr Trunk / Engine Lamp Kit Dome-shaped cover with bulb. Includes wire. Exact copy of the original Ford kit. For trunk and / or engine compartment Falcon and 65 Comet.... C2RZ-15A700A...kit TB64FA-02 Convertible Top Boots Please specify color by adding color code to the end of the part number when ordering. NOTE: Convertible top boots are matched to upholstery color, not convertible top color. White is non-original color and is a special-order item that cannot be returned From late 63. Black (01), Blue (02), Red (03), Ivy Gold (12), Palomino (21).... TB64FA-...ea White.... TB64FA-05...ea FTS RTS Convertible Top Tack Strips Attaches the top to the bow. Tack strips are 5' long, which is long enough to do any car Front. 1 8 " thick, 5 8 " wide... FTS...ea Rear. 1 4 " thick, 1 2 " wide... RTS...ea ORDER TOLL TOLL-FREE

4 Convertible Top Cylinder CVT103 Convertible Top Cylinder Pump Convertible Top Hydraulic Cylinders 63 LH or RH.... TC34...ea LH or RH.... TC42...ea Convertible Top Cylinder Hose Requires 2 per vehicle.... CVT103...ea Convertible Top Hydraulic Cylinder Bushing At rear side rail. Requires 2 per vehicle.... C3AZ A...ea Convertible Top Lift Motor Includes wiring. NOTE: Electrical parts are non-returnable once installed. We will replace defective units only D1AZ-76533A00A...ea Convertible Top Main Pivot Bushings Nylon bushings. Located at the main mounting pivot bracket. There are two on each side of the car. Package of 4 bushings AK943...pkg CV17 C4DZ-14526C Convertible Top Snap Studs with Nuts Very much like original. Set of 17 screws and nut retainers CV17...kit Convertible Power Top Terminal and Circuit Breaker NOTE: Electrical parts are non-returnable once installed. We will replace defective units only C4DZ-14526C...ea Convertible Top Repair Manual Reprint of Ford s convertible top repair and adjustment manual in original form. Covers Falcon and Comet. 15 pgs.... MP14...ea Convertible Top Guide II By Nat Danas, compiled by Ann Williams. This fundamental workbook covers cylinder and framework maintenance and has articles from professionals with full instructions that walk you through the whole cut-and-sew process. Other articles cover proper sealing, frames and brackets, and understanding the mechanisms. Sftbd. 100 pgs.... CTG...ea RaggTopp Convertible Top Cleaner Made for vinyl convertible tops, but also good for car bras. Safely removes even the toughest roof soils and stains. Environmentally safe and biodegradable. 16 oz... CVCLEANER...ea RaggTopp Vinyl Protectant Exclusively developed for exterior protection against ultraviolet fading, cracking and hardening. Repels water, dust, premature soiling and staining. Restores and maintains a new-like appearance. Long-lasting and washable. Will not streak. Good for car bras. 16 oz... CVPROTECT...ea VT66FA62-01 Vinyl Tops The patterns for these tops are fitted, not universal, and are made to duplicate as closely as possible the fit and styling of the original top. Made from the highest quality Haartz fleece back vinyl roof topping. Please provide year and model of vehicle when ordering. Available in Black (01) or White (05). Please specify color choice by adding color code to the end of the part number when ordering. Falcon door sedan... VT62FA62-...ea door sedan... VT62FA54-...ea door hardtop... VT63FA65-...ea door sedan; door hardtop; Futura 2-door hardop and 2-door sedan.... VT66FA62-...ea door sedan; Futura 4-door sedan.... VT66FA54-...ea door hardtop... VT70FL65-...ea door sedan... VT70FL54-...ea Ranchero VT66RH-...ea C4DZ B C5ZZ-16929A Hood Latch Parts Hood Latch Catch Falcon; 65 Comet. Painted.... C4DZ-16918B...ea Stainless.... C4DZ-16918S...ea Hood Latch Pin Zinc-plated. Includes nut and washer Falcon after 4/1/64; 65 Comet.... C5ZZ-16929A...ea Hood Prop Rod Universal fit. Has a polished finish and made of quality 304 stainless steel. Includes stainless washers and spring and has a tip cover to protect the hood. Overall rod length is 35" but may be cut to desired length.... C5ZZ-16826S...ea EXTERIOR

5 EXTERIOR 54 Hood Hinge Spring Falcon and Comet.... C3OZ ea C3DZ A C3OZ Hood Hinges Painted black Falcon / Ranchero; late 63 Comet. LH and RH. Includes springs.... C3DZ A...pr LH.... C3OZ ea RH.... C3OZ ea ** NOTE: Steel hoods are on page 64. ** C4DZ A Hood Bumpers Hood to fender. C6OZ A B7A-16758A C2DB-16763A C7AZ A Falcon; Comet. Set of B7A-16758A...set Set of 4... C2DB-16763A...set Requires 4 per vehicle. Push-on.... C4DZ-16758A...ea Requires 4 per vehicle. Push-on with correct cross-section.... C6OZ-16758A...ea Requires 4 per vehicle.... C7AZ-16758A...ea Headlamp Retainer Ring A-13015A...ea B8AZ-13007B B8AZ-13007A C0DZ-13007A FoMoCo Script Headlamp Bulbs Halogen Features reversed, raised FoMoCo logo in the center like original. Does not have Wagner logo Comet " round sealed-beam. High beam.... B8AZ-13007B...ea Low beam.... B8AZ-13007A...ea Falcon and Ranchero. High beam / low beam. 7" round.... C0DZ-13007A...ea C1AB A C2OZ A Headlamp Adjusting Springs 63 Comet.... C1AB-13031A...ea Comet.... C2OZ-13031A...ea C2TZ A C3MY A Headlamp Adjusting Nuts Falcon... C2TZ-13181A...ea Comet. Requires 8 per vehicle.... C3MY-13181A...ea C3DZ-13064AB C4DZ-13064PR C5DZ-13064PR Headlamp Doors Exact reproductions made from die-stamped aluminum with factory bright anodized finish. 63 Falcon / Ranchero. LH and RH.... C3DZ-13064AB...pr Falcon / Ranchero. LH and RH.... C4DZ-13064PR...pr Falcon / Ranchero. LH and RH.... C5DZ-13064PR...pr C1DZ A B7A A Headlamp Mount and Adjusting Bucket Reproduction made exactly like original. Black painted finish LH or RH... C1DZ-13118A...ea Headlamp Bucket-to-Fender Gasket B7A-13044A...ea Headlamp Socket And Pigtail Universal Fits most 3-terminal, sealed beam headlamps ea ORDER TOLL TOLL-FREE

6 Radio Antennas and Related Antenna Base Chrome ea C0DZ- 18A813 C5ZZ- 18A813 AWUT10 Base ARF615 Base U Base EXTERIOR Antenna Mount Pads Falcon; Comet.... C0DZ-18A813...ea C5ZZ-18A813...ea C3DZ Base C3DZ C4DZ Base C4DZ AWUT10 ARF U Antennas Universal Designed for AM or FM bands. Will work for most vehicles. Round Base 38" long 3-section retractable stainless steel mast. The base covers 1" hole and includes a dome cap and nut. Cable is approximately 48" long. Includes instructions for easy installation.... AWUT10...kit Rectangular Base Non-retractable Mast Cable is approximately 72" long. Please measure your cable length; some applications may require an extension. Not exactly as original.... ARF615...kit Retractable Mast 43" long 3-section retractable mast. Base measures " " and includes chrome-plated retaining nut. Cable is approximately 51" long U...kit C6DZ Base C5AZ Base D3AZ Base Windshield Wiper Pivot Shaft Bezels Chrome plated B7A A...pr BA S C6DZ-18813A C5AZ D3AZ-18813C Antennas Reproductions With correct base, cable and gasket. Made in the USA.... C3DZ ea With correct base and cable. Includes gasket. Reproduction made in the USA.... C4DZ-18813A...ea Import... C4DZ ea Standard fender mount. Includes mast / base, coax cable, molded mounting pads, mounting templates, and fasteners. Made in the USA... C6DZ-18813A...ea With telescoping teardrop mast. Looks like original.... C5AZ ea Air foil type. Square base. Made in the USA.... D3AZ-18813C...ea Can t decide on a gift idea? How about an Auto Krafters Gift Certificate? They are available in your choice of dollar amount. Check online or ask your sales associate today. Windshield Wiper Pivot Shaft Bezel Washers Rubber BA pr Windshield Wiper Pivot Shaft Nut Chrome Falcon; Comet S...ea Windshield Wiper Arm Linkage Clip Reproduction C5ZZ-17531A...ea C0AZ-17526A C6ZZ Windshield Wiper Arms Reproductions. Looks like OEM Requires 2 per vehicle.... C0AZ-17526A...ea Requires 2 per vehicle.... C6ZZ ea

7 56 EXTERIOR Windshield Wiper Blade Assembly Satin finish. Requires 2 assemblies per vehicle ea C5AZ-17696F D4AZ-17696R B5A A B5AZ C8AZ C1SZ-17696B C5ZZ RH C3RZ-17696US C5ZZ A Outside Mirrors Falcon and Comet. Includes paper mounting gasket. Ford logo (on applicable mirrors) is die-cast into the base. Made in the USA. One Mounting Hole Without logo on base.... B6A ea Falcon and Comet. Includes paper mounting gasket. Ford logo (on applicable mirrors) is die-cast into the base. Made in the USA. Two Mounting Holes Without logo on base.... B6A-17696A...ea With FoMoCo logo on base.... B5A-18402A...ea Falcon and Comet. Conical. No hardware included. Mirror pad sold separately. Import.... B5AZ ea Comet and 66 Falcon. Suitable replacement for Falcon, but holes may not line up. Round head. Made in the USA. Features Ford script. Triple-chrome plated.... C1SZ-17696B...ea Import. Does not have Ford script..... C1SZ-17696R...ea Standard. Round head. Includes mirror pad. Made in USA.... C3RZ-17696US...ea Import.... C3RZ ea Made in the USA. LH. Remote... C5ZZ-17696A...ea RH. Match to LH remote.... C5ZZ-17696RH...ea Outside Mirrors Continued LH or RH. Rectangular. Made in USA.... C5AZ-17696F...ea Standard. LH or RH. Rectangular head. Includes mounting pads and hardware. Reproduction. Import.... D4AZ-17696R...ea LH Remote 34" cable. Mirror base is approximately " from end to end and " from center of screw hole to center of screw hole. Includes pad which requires modification. Made in USA ea RH Manual Match to LH remote. Base: " long, screw holes (center to center): ". Made in USA... C8AZ ea Concours quality with flat glass.... C8AZ-17696AR...ea Outside Mirror Universal Chrome-plated ABS plastic mirror with classic round head design. Will work for either LH or RH side. Easy to install using standard tools. Head: ". Base: ". Mounting holes center-to-center: ". Pad and screws included.... MIR596...ea B5A-17724R C1SZ-17724A C3RZ-17724A C5ZZ-17724B Outside Mirror Pads For mirror #B5AZ B5A-17724R...ea For mirror #C1SZ-17696B.... C1SZ-17724A...ea For mirror #C3RZ-17696US.... C3RZ-17724A...ea For mirror #C5ZZ-17696A remote mirror. LH or RH.... C5ZZ-17724B...ea C3RZ MK Outside Mirror Mounting Kits Repairs oversized holes. Includes 2 screws and 2 bushings Standard mirror... C3RZ-17696MK...kit Remote mirror... C5ZZ-17696MK...kit ORDER TOLL TOLL-FREE

8 57 C0DZ PR C4DZ P C6OZ AX Door / Ignition Lock Sets Continued LCK3...set Door Lock Cylinder Retainer C5AZ A...ea EXTERIOR Outside Door Handles Falcon, except 2-door hardtop and convertible. Pads and buttons not included. Made in USA.... C0DZ PR...pr Front. Handles with pads and buttons. Made in the USA. Concours-quality. Also includes pivot mechanisms, rod clips and hardware. Finest handles on the market, made with new tooling from Ford Motor Co. print.... C4DZ P...pr Import Handles and buttons only pr Includes pads and buttons. LH.... C6OZ AX...ea RH.... C6OZ AX...ea Outside Door Handle Button C6OZ B...ea Parking Lamp Related C0DF-13208A C1DF C C2DB-13208B C3DZ-13208A C3AZ-13208B Lenses 60 Falcon. Clear... C0DF-13208A...ea Falcon, Ranchero. Clear... C1DF-13208C...ea Clear... C2DB-13208B...ea Amber... C3DZ-13208A...ea Comet. Clear.... C3AZ-13208B...ea Amber.... C4OZ-13208A...ea HP 6671HP Outside Door Handle Pads Sets of 4: 2 small and 2 large. Each set does one pair of handles HP...set HP...set LCK1 LCK30 LCK2 C2DZ-13206/7 C4DZ /7 Lamp Bodies Falcon. LH and RH. Includes housing, wiring and lens gaskets.... C2DZ-13206/7...pr Falcon. Includes housing, wiring and lens gaskets. LH and RH... C4DZ-13206/7...pr Door / Ignition Lock Sets Includes 2 keys Comet..... LCK1...set With 2 Falcon keys. Must re-use old pawl, which is the little arm off the end of the door lock cylinders.... LCK30...set LCK1...set LCK2...set C2DZ A C4DZ A Lamp Body Retainers Falcon. LH and RH.... C2DZ A...pr Falcon. LH and RH.... C4DZ A...pr

9 EXTERIOR 58 Parking Lamp Related Continued F121 F122 F123 C1AB-13211A Taillight Related C0DF-13450A C1KF-13450C Lenses Requires 2 per vehicle, unless otherwise noted Falcon... C0DF-13450A...ea Comet.... C1KF-13450C...ea C6DZ-13211A F174 Lens Gaskets F121...pr Comet.... F165...pr F122...pr F123...pr Comet.... C1AB-13211A...pr C6DZ-13211A...pr F174...pr C2GY C C2DZ A C2GY A C2GY B 62 Falcon. Without back-up lens.... C2DZ-13450A...ea Comet except S-22, station wagon. Requires 4 per vehicle.... C2GY-13450A...ea Comet S-22 Sport. Without back-up lens. Requires 4 per vehicle.... C2GY-13450C...ea With back-up lens " wide 3" deep. Requires 2 per vehicle.... C2GY-15514B...ea Parking Lamp Socket and Wiring Replacement. Includes pigtail. Accepts a #1157 bulb Comet.... S36N...ea S36N...ea Marker Lamp Related C9DZ- 15A215C C9AZ- 15A201C C9AZ-15A447 C9AZ-15A440A Lamp Bodies with Lenses 69 Front. Requires 2 per vehicle. Clear... C9DZ-15A215C...ea Rear. Requires 2 per vehicle. Red... C9AZ-15A201C...ea Body Pads Set of Front and rear... C9AZ-15A447...set Lamp Bezel Front or rear. Requires 4 per vehicle.... C9AZ-15A440A...ea Marker Lamp Bezel Mounting Pal Nut #10 32, 1 2 " O.D., 3 8 " hex Front or rear. Requires 2 per bezel.... AV ea...25 C2OB- 13A497B C2OZ B C2OB Falcon. With back-up lamp lens assembly.... C2OB-13A497B...ea Without back-up lens. Ford script.... C2OZ-13450B...ea With hole for back-up lens.... C2OB ea Comet except station wagon. Without back-up lens. Requires 4 per car.... C2GY-13450C...ea With back-up lens " wide 3" deep. Requires 2 per car.... C2GY-15514B...ea C4DZ B C6DZ D C4DZ A 64 Falcon all. Ford script. Without back-up lens.... C4DZ-13450B...ea With back-up lens... C4DZ-13450A...ea or 4-door sedan. Ford script with back-up light lens.... C6DZ-13450D...ea ORDER TOLL TOLL-FREE

10 59 Taillight Related Continued C5DZ-13450EG Lens Bezels Chrome. 65 Falcon sedan, hardtop, and convertible. LH or RH... C5DZ-13450EG...ea Falcon station wagon and sedan delivery; Ranchero. LH or RH... C5DZ-13450HF...ea Taillight Related Continued Typical 65 Comet RH Taillight Assembly F120 EXTERIOR C5GY-13461SET C0DF-13420B C2DB-13420B C4DZ-13420A C5GY-13420PR Taillight-to-Body Pads C0DF-13420B...pr C2DB-13420B...pr C4DZ-13420A...pr Comet except station wagon.... C5GY-13420PR...pr F169 F171 F172 F175 F117 F176 F119 F167 F118 Taillight Lens Gaskets Continued F120...pr Comet except station wagon. Complete set of 4 gaskets, inner and outer.... C5GY-13461SET...set Except station wagon and Ranchero. Set of 4: 2 taillight lens gaskets and 2 back-up lens gaskets.... F169...set Falcon station wagon and Ranchero with reflector. Set of 6... F171...set Except station wagon. Set of 4: 2 taillight lens gaskets and 2 back-up lens gaskets.... F172...set Except station wagon. Set of 6: 2 taillight lens gaskets and 4 back-up lens gaskets.... F175...set F124 Taillight Lens Gaskets F117...pr F118...pr Comet S-22. Set of F176...set F119...pr Comet except S-22 and station wagon. Set of F167...set Comet.... F124...pr S36N S91 Taillight Sockets and Wiring Replacement. Includes pigtail Comet. Accepts a #1157 bulb.... S36N...ea Falcon / Ranchero " long. Accepts #1157 / 2057 bulbs.... S91...ea Accepts a #1157 bulb.... S36N...ea

11 EXTERIOR 60 Back-Up Lamp Related Rear Lamp Socket and Wiring Replacement. Clip-in type. Accepts a #1157 bulb S75...ea License Plate Lamp Related Continued Back C4AZ-13560A Front Front Back Typical Falcon Back-Up Lamp Assembly F169 C0DB-15510A F172 F175 Lens Gaskets Falcon all; 63 Falcon station wagon and sedan delivery; 63 Comet 2- and 4-door sedan and convertible, except S-22; 63 Ranchero.... C0DB-15510A...set Except station wagon and Ranchero. Set of 4: 2 back-up lens gaskets and 2 taillight lens gaskets.... F169...set Except station wagon. Set of 4: 2 back-up lens gaskets and 2 taillight lens gaskets.... F172...set Except station wagon. Set of 6: 4 back-up lens gaskets and 2 taillight lens gaskets.... F175...set License Plate Lamp Related C4AZ A Lamp Assemblies Continued Falcon, except station wagon; Comet. Housing, socket and wiring only.... C4AZ-13560A...ea Complete assembly. Made exactly like original.... C4AZ-13550A...ea C0DF A C4AZ A Lamp Lenses Glass reproduction made exactly like original.... C0DF-13564A...ea C4AZ-13564A...ea C1AZ A C5OZ B Lamp Covers C1AZ-13566A...ea Falcon sedan... C5OZ-13566B...ea B9A-13568A C7AZ-13568A License Plate Lamp Lens Gaskets B9A-13568A...ea Falcon and Comet; Falcon sedan.... C7AZ-13568A...ea Front Back C3AZ-13560A License Plate Bumper Rear. Requires 2 per vehicle.... AV ea Moulding Front Back C0DZ-13550A C3DZ B Lamp Assemblies Housing, socket and wiring only.... C3AZ-13560A...ea Falcon except station wagon and sedan delivery.... C0DZ-13550A...ea Rocker Panel Moulding Set Clips sold separately (see next page). NOTE: There is a $15.00 per order boxing fee for this item C3DZ B...set ORDER TOLL TOLL-FREE

12 C2YY C2YY AX C2GY-16A076A Rocker Panel Moulding Clips / Retainers Falcon hardtop and 2- or 4-door sedan (requires 6 per side); 64 Falcon all (requires 6 per side); 65 Falcon (requires 6 per side); 65 Comet or 4-door sedan (requires 6 per side); 65 Comet or 4-door sedan (requires 6 per side); 65 Comet station wagon, except with wood rail (requires 6 per side); Ranchero (requires 6 per side). With rectangular screw hole Each.... C2YY ea Set of C2YY SET...set With round screw hole Each.... C2YY AX...ea Comet Cyclone. Requires 16 per vehicle.... C2GY-16A076A...ea Tip Detail Moulding Clip Installation Pliers Zinc-plated pliers made to install flare-type moulding clips. The tips are designed to take hold and crimp the outer center tabs of the clip. Features rubber grip handles... TL300...ea ** Other Moulding Clips are on pages ** Hood Ornaments and Emblems Continued C4DZ AD C5AZ-16606S 61 F-O-R-D Letter Sets Continued C4DZ AD...set C5AZ-16606S...set C4GY-16604A C5GY-16604A Comet Script C4GY-16604A...ea On front edge of hood.... C5GY-16604A...ea C5DZ- 8213R C5GY- 8A223HEAD C5GY- 8A223IN Grille emblem and Grille Ornament Insert Emblem 3 Falcon logos on vertical bar. Red, white and blue background. Plastic C5DZ-8213R...ea Ornament Head 65 Comet except Cyclone.... C5GY-8A223HEAD...ea Ornament Insert 65 Comet except Cyclone.... C5GY-8A223IN...ea EXTERIOR ** Universal Moulding Clips are on page 136. ** Emblems Top of Fender Ornaments Made in the USA C2DZ A...pr Fender Emblems Hood Ornaments and Emblems Ornament Chrome base and oval, with red, white and blue Ford crown / crest C4DZ-16850B...ea C0DB AD C2DZ AD F-O-R-D Letter Sets Falcon / Ranchero... C0DB AD...set C2DZ AD...set C2OZ-16228B C4DZ-16228C 260 Emblems C2OZ-16228B...ea Painted area is black.... C4DZ-16228C...ea Not sure of a term used here? Check out the Glossary in the back of this catalog.

13 EXTERIOR 62 Fender Emblems Continued C3OZ-16228B C5OZ-16228A C7OZ Emblems C3OZ-16228B...ea Chrome and black flags with gold center triangle and 289 in chrome... C5OZ-16228A...ea Blue-painted center with 289 painted white in the center with chrome edge... C7OZ ea C3DZ-16098A Falcon Script C4DZ-16098B With open letters... C3DZ-16098A...ea Falcon except sedan with Deluxe moulding. With open letters... C3DZ-16098A...ea All except convertible and hardtop.... C4DZ-16098B...ea C4DZ A C5DZ B Falcon Fender Badges Chrome with a falcon; red, white and blue stripes; and text in black. Includes attaching hardware Falcon. Show quality... C4DZ A...pr Futura... C5DZ B...pr C4DZ-16228B C4DZ-16098D Sprint Emblems Sprint V8... C4DZ-16228B...ea Sprint script. Chrome. 4 pin... C4DZ-16098D...ea Fender Emblems Continued C4GY-16098C C5GY-16300A Comet Fender Emblems Continued 64 Caliente script.... C4GY-16098C...ea Comet except Villager station wagon. Comet bar emblem. One-piece chrome bar unit has black painted interior stripes. Requires 3 per fender.... C5GY-16300A...ea C1DB-16098C C6DZ-16098C Ranchero Script Includes mounting hardware " long... C1DB-16098C...ea C6DZ-16098C...ea Non-Stock Fender Emblems Plastic with industrial-grade plating and double-sided tape for easy installation. KPP5093 KPP5094 Rectangles Chrome numbers on black background with chrome border " long 3 4 " tall KPP ea KPP ea Open Numbers Chrome numbers with black border with red inside the decimal " long " tall ea C2DZ-62517A18-9 C3DZ-63517A18-9 Roof Side (Pillar) Emblems Futura... C2DZ-62517A pr Sprint. Hardware not included.... C3DZ-63517A pr Requires 2 per vehicle. Ranchero steer head emblem. Chrome emblem with black background... C6DZ A...ea Comet Fender Emblems 64 Comet. Black flag emblems. LH and RH.... C4MY PR...pr Can t decide on a gift idea? How about an Auto Krafters Gift Certificate? They are available in your choice of dollar amount. Check online or ask your sales associate today. ORDER TOLL TOLL-FREE

14 Quarter panel Emblems C4DZ-62290A76/7A C2DZ AF C2DZ GL 63 Rear Body Panel Emblems F-A-L-C-O-N letter set.... C2DZ AF...set F-U-T-U-R-A letter set.... C2DZ GL...set EXTERIOR C5GY-16604A Falcon; Ranchero. Chevrons. LH and RH... C4DZ-62290A76/7A...pr Comet script.... C5GY-16604A...ea Trunk and Tailgate Emblems C0DB AD C4DZ AF Letter Sets Ranchero tailgate. F-O-R-D... C0DB AD...set Ranchero tailgate. F-O-R-D... C2DZ AD...set Falcon trunk. F-A-L-C-O-N... C4DZ AF...set Falcon tailgate. F-O-R-D... C5AZ-16606S...set S AV11293 AV8405 Tube Nuts (Barrel Clips) Used for fastening emblems to body panels. Small (for individual Ford hood letter) 1 16 " diameter emblem stud, 1 8 " panel hole. Medium S...ea " diameter emblem stud, 3 16 " panel hole.... AV ea...50 Large (for 260 and 289 emblems) 3 16 " diameter emblem stud, 1 4 " panel hole.... AV ea Clear Plastic and Emblem Adhesive Excellent adhesive for plastic repair and emblem application. May be used for interior or exterior bonding. Used for bonding metal emblems, rigid plastic parts, taillight lenses and vinyl trim strips. Strong, quick drying. One surface application. 5 oz. tube ea Bumpers 65 Comet trunk. C-O-M-E-T... C5GY A-E...set C0DB A C2DZ INS Emblems, Ornaments and Inserts Falcon 2- or 4-door sedan. Trunk lid emblem and bezel.... C0DB A...ea Deck lid ornament insert (trunk lock cover). Plastic... C2DZ INS...ea C0DZ A C6DZ A Ranchero Tailgate Emblems Chrome with red background.... C0DZ A...ea C6DZ A...ea Typical 65 Falcon Front Bumper Typical 65 Falcon Rear Bumper Bumper Rechroming ** Please call our Rebuild Department to place an order or ask any questions regarding this process. ** Good quality, US-production, triple-nickel and triple-chrome plating for YOUR bumper. Limited lifetime warranty from the manufacturer to the original purchaser. This warranty covers the plating under normal circumstances as long as the item plated is properly maintained. You must retain your invoice for verification of purchase. Please allow 12 to 14 weeks, plus shipping, for this process. Falcon Front or rear...ea Comet Front or rear...ea Ranchero Front...ea Rear...ea

15 64 EXTERIOR / SHEET METAL C1DZ-17906A C4DZ C4DZ Bumpers Chrome New reproductions. No core fee, no exchange. Not show quality. NOTE: There is a $10.00 per order boxing fee for these items. NOTE: These are oversized items. Additional shipping charges apply Rear.... C1DZ-17906A...ea Front... C4DZ ea Falcon; Ranchero; 65 Comet station wagon. Rear.... C4DZ ea C4DZ B/55B C4DZ B/54B C6DB-BM Bumper Mounting Fastener Kits Contains all the hardware necessary to mount the front and rear bumpers including bumper bolts and bracket bolts. 66 Ranchero... C6DB-BM66...kit Falcon... C6DB-BM...kit Bumper Bolt Wave Washer C5ZZ-17A924...ea AK1003 AK195 Bumper Bolts " " long bolt with nut.... AK ea Comet. Front and rear " ". 2 bolts with nuts.... AK195...ea " " long bolt with nut.... AK ea C4DZ C/96A Bumper Brackets C4DZ C/95A Front Falcon except station wagon, sedan delivery, and Ranchero. LH... C4DZ-17767B/55B...set RH... C4DZ-17766B/54B...set Rear Inner and outer rear bumper arms tack welded together Falcon except station wagon, sedan delivery, and Ranchero. LH... C4DZ-17788C/96A...set RH... C4DZ-17787C/95A...set Sheet Metal Due to UPS size restrictions, some items must be shipped via commercial truck lines with the shipping prepaid to Auto Krafters. Call before ordering for shipping charges. Minimum truck shipment charges start at $ Please provide a business delivery address when ordering. NOTE: A $10.00 boxing fee will be added per order for all sheet metal. Radiator Support NOTE: This is an oversized items. Additional shipping charges apply C5DZ-16138A...ea Bumper Mounting Kit Includes 12 bolts, 12 flat washers, and 12 nuts. 36-piece kit Front and rear... FO167...kit Bumper Bracket Mounting Kit Includes 6 front frame-to-bumper bracket washers, 6 front frame-tobumper bracket bolts, 4 rear frame-to-bumper bracket bolts, 8 rear frame-to-bumper bracket washers, and 4 rear frame-to-bumper bracket nuts. 28-piece kit. NOTE: Does not include bumper brackets Front and rear... FO168...kit Hood Steel Excellent reproduction with fine bolt threads. Measures " ". NOTE: This item ships via truck freight. Please contact us for a shipping quote before ordering C5DZ-16612A...ea ORDER TOLL TOLL-FREE

16 C4DZ B C4DZ B Front Fenders Very good reproduction. Stamped from 19 gauge steel. Does not have moulding or emblem mounting holes (must be drilled). NOTE: These items ship via truck freight. Please contact us for a shipping quote before ordering LH... C4DZ-16006B...ea RH. Features antenna mounting hole.... C4DZ-16005B...ea " " " " AK L AK R 65 Toe Boards (Floor-to- Firewall Extensions) 18 Gauge Precision machine-fabricated panels. NOTE: There is a $10.00 per order boxing fee for these items LH.... AK L...ea RH.... AK R...ea " " SHEET METAL " " C4DZ-16055KIT C4DZ-16054KIT Shock Tower Kits Kits include: front and rear fender apron, inner shock tower and brace, outer shock tower cover, rear apron-to-cowl brace and full frame rail. NOTE: These items ship via truck freight. Please contact us for a shipping quote before ordering LH... C4DZ-16055KIT...ea RH... C4DZ-16054KIT...ea Cowl Cover Panel with Vents NOTE: This is an oversized item. Additional shipping charges apply C5DZ A...ea " " L R Front Floor Pans 19 Gauge Requires 2 per vehicle. NOTE: There is a $10.00 per order boxing fee for these items. NOTE: These are oversized items. Additional shipping charges apply NOTE: These floor pans are intended for use on hardtop, sedan, station wagon, and Ranchero. They must be modified for use on convertible. LH L...ea RH R...ea " 25" " " " 13" " L R " " " L R Toe Boards Floor-to- Firewall Extensions 19 Gauge Requires 2 per vehicle. NOTE: There is a $10.00 per order boxing fee for these items. NOTE: These are oversized items. Additional shipping charges apply NOTE: These floor pans are intended for use on hardtop sedan, station wagon, and Ranchero. They must be modified for use on convertible. LH L...ea RH R...ea LH L...ea RH R...ea L R Rear Floor Pans 19 Gauge Requires 2 per vehicle. NOTE: There is a $10.00 per order boxing fee for these items. NOTE: These are oversized items. Additional shipping charges apply Sedan and hardtop. LH L...ea RH R...ea Join the Falcon Club of America! Meet other Falcon owners and share information Receive a monthly newsletter More club information can be found in the back of this catalog.

17 SHEET METAL " AK L AK L " " " " " " " AK R AK R Floor Pans 18 Gauge Precision machine-fabricated panels. NOTE: There is a $10.00 per order boxing fee for these items. NOTE: These are oversized items. Additional shipping charges apply Front LH.... AK L...ea Front RH.... AK R...ea Rear LH.... AK L...ea Rear RH.... AK R...ea " 26" 23" 23" L R Front Floor Pans 19 Gauge NOTE: There is a $10.00 per order boxing fee for these items. NOTE: These are oversized items. Additional shipping charges apply LH L...ea RH R...ea " " " 26" L R Full Floors Does not include toe boards " long 26" wide at the midpoint (tapers at one end to 22"). 19 gauge. NOTE: These floor pans are intended for use on sedans and hardtops only. They must be modified for use on convertibles. NOTE: There is a $10.00 per order boxing fee for these items. NOTE: These are oversized items. Additional shipping charges apply LH L...ea RH R...ea Complete Floor This is the complete floor, driver and passenger side, connected by the center hump. This excellent reproduction is easier to install than multiple floor pan repair panels, gives a more factory-original appearance, and makes a more rigid floor. Made from stamped 18 gauge, universal-grade automotive steel except convertible.... C2DZ R...ea " " Floor Pan Drain Cover Plate Hardware not included. Requires 4 per vehicle Falcon and 65 Comet.... C7AZ A...ea C6OZ B L 30" 30" R Rear Floor Pans 19 Gauge NOTE: There is a $10.00 per order boxing fee for these items. NOTE: These are oversized items. Additional shipping charges apply LH L...ea RH R...ea Seam Sealer Premium-quality, fast-setting seam sealer with superior adhesion for interior and exterior applications (except windshields). Excellent sealer for quarter panel seams, trunk seams, wheelhouse seams, floor seams, cowl seams and door skins. Use with caulking gun. 11 oz. cartridge... AV ea C6OZ B Front Floor Crossmembers LH... C6OZ B...ea RH... C6OZ B...ea C6OZ B 6" 6" 9" 9" C6OZ B Front Floor Pan Seat Track Reinforcement NOTE: There is a $10.00 per order boxing fee for these items LH... C6OZ B...ea RH... C6OZ B...ea ORDER TOLL TOLL-FREE

18 Front Seat Track-to-Floor Reinforcement Used on the underside of the floor pan, on the rear of each inner bucket seat track. Requires one pair per vehicle With bucket seats... C6OZ-63617B70A...pr " " AK L Outer Rocker Panels Precision machine, fabricated panels. NOTE: There is a $10.00 per order boxing fee for these items. NOTE: These are oversized items. Additional shipping charges apply Falcon 2-door; Ranchero. LH... AK L...ea RH... AK R...ea " 43" Quarter Panel Repair Panels Continued 21" 25" 67 RFP56BXL RFP56BXR Falcon. Behind wheel. LH... RFP56BXL...ea RH... RFP56BXR...ea RFP88BXL 21" 25" RFP88BXR Falcon. Behind wheel. LH... RFP88BXL...ea RH... RFP88BXR...ea " " SHEET METAL 21" 21" 9" 9" R R Lower Rear Quarter Panel Patches 19 gauge. For cars only. Will not fit Ranchero, sedan delivery or station wagon. Will not work for Comets. (May be cut for partial repair, but will not fit if used complete.) NOTE: There is a $10.00 per order boxing fee for these items. NOTE: These are oversized items. Additional shipping charges apply LH L...ea RH R...ea LH L...ea RH R...ea Quarter Panel Repair Panels 19 gauge. NOTE: There is a $10.00 per order boxing fee for these items. NOTE: Some of these items are oversized. Additional shipping charges may apply. 33" QPFS32R Falcon and Comet. Front of panel. LH.... QPFS32L...ea RH.... QPFS32R...ea " 33" RFP89BXR Ranchero. Rear of rear quarter, behind tire. Must be trimmed. LH... RFP89BXL...ea RH... RFP89BXR...ea " Trunk Floor Extensions Precision machine, fabricated panels. NOTE: There is a $10.00 per order boxing fee for these items LH and RH.... AK pr " Complete Trunk Floor Complete trunk floor that includes the center floor panel, rear filler panel, 57" left-hand and right-hand floor pans and the rear cross-member. This is an excellent reproduction and is easier to install than multiple floor pan repair panels. Gives a more factory-original appearance and makes " a more rigid floor. Stamped 18-gauge 1006 universal-grade automotive steel. NOTE: There is a $10.00 per order boxing fee for this item. NOTE: Due to its size, additional shipping charges may apply. Please call for a shipping quote Falcon hardtop, sedan, and convertible.... C4DZ R...ea FM755 ** Exterior Plugs are on page 12. ** D0OZ A Hood Insulation Does not include clips. Requires spray adhesive (see page 151) Falcon / Ranchero... FM091...ea Comet. 4-piece set.... FM755...set D0OZ-16738A...ea

19 EXTERIOR 68 Wheels and Related NOTE: Once a wheel has been mounted, it is non-returnable; check for fit on your vehicle before mounting. Please read all installation / application instructions. NOTE: Free shipping on sets of 4 wheels when shipped within the lower 48 U.S. states. For any other number of wheels or for shipments outside the lower 48 U.S. states, there is a $20 per wheel shipping charge, unless otherwise stated. Cragar Wheels and Related S/S Super Sport Wheels Composite chrome steel rim with a 5-spoke, chrome aluminum center. Includes center cap. Bolt pattern: 5 4.5, 4.75, 5. Requires mag-type lug nuts with a shank length of.800" (see part # below). Typical Cragar S/S Wheel 14 6 Backspacing: ". Offset: -3 mm. Max. 14" tire size diameter: 28". Recommended max. wheel load: 1,580 lbs ea Backspacing: ". Offset: +3 mm. Max. 14" tire size diameter: 28". Recommended max. wheel load: 1,400 lbs ea Backspacing: ". Offset: +3 mm. Max. 15" tire size diameter is 30". Recommended max. wheel load: 1,500 lbs ea Backspacing: ". Offset: -6 mm. Max. 15" tire size diameter is 30". Recommended max. wheel load: 1,500 lbs ea Series Quick Trick I Wheel Steel chrome. Bolt pattern: 4 4.5". Backspacing: ". Offset: 0 mm. Requires 4 conical seat (acorn) style lug nuts. Center cap sold separately. Lug nuts are not included Falcon; Comet. All 6-cylinder with 14" wheels ea Center cap for Quick Trick wheel.... SC2950C...ea Cragar Lug Nuts Fits Cragar wheels with 5 4.5, 4.75, 5 bolt circle. These.800 shank mag-style lug nuts come with offset hole washers and have 1 2 " 20 right hand threads ea Styled Steel Wheels and Related Styled Steel Wheels These Mustang wheels were available as a dealerinstalled option on Falcons. 5 lug bolt pattern. Features triple chrome plating and baked on charcoal paint. For center cap, see part #C6OZ-1130SS or C7WY-1130W (in the next column). 65SS14X5 NOTE: May not work on vehicles with oversize brake calipers " backspacing... 65SS14X5...ea mm ( ") offset, 4" backspacing SS14X6...ea mm ( ") offset, " backspacing SS14X7...ea Styled Steel Wheels and Related Continued C6OZ- 1130SS C7WY- 1130W Center Caps UV protected. Red background with red, white and blue Ford crest. Will also work on Magnum 500 wheels. Falcon / Ranchero... C6OZ-1130SS...ea Black background with silver Mercury man head emblem. Attaches with 2 screws. Will work on styled steel wheels only. Comet.... C7WY-1130W...ea American Racing Torq-Thrust Wheels Machined lip. Includes center caps. For lug nuts, see part #64000 below. NOTE: May not work on vehicles with oversized brake calipers. Typical Torq-Thrust D Wheel Typical Torq-Thrust II Wheel Torq-Thrust D Wheels One-piece alloy. Center is painted matte black or magnesium gray Black center " bolt circle. 3.42" backspacing.... AR BK...ea Gray center " bolt circle. 3.75" backspacing.... AR ea Comet and Falcon. Black center " bolt circle. 3.66" backspacing.... AR BK...ea Gray center " bolt circle. 3.75" backspacing.... AR ea Black center " bolt circle. 3.76" backspacing.... AR BK...ea Gray center " bolt circle. 3.75" backspacing.... AR ea Torq-Thrust II Wheels " bolt circle. 3.37" backspacing. Offset 3 4 ". 1-piece polished alloy.... VN ea M c Gard Tough Nuts Regular cone seat " overall length " hex head thread count. Set of set American Racing Ansen Sprint Wheel Set Includes center caps. Sold only in a set of 4. For lug nuts, see part #S2MS-1012A on page 70. NOTE: There is a $ per set charge for shipping outside the lower 48 U.S. states Falcon; Falcon 260 before 4/13/64; Comet Backspacing: 4". Bolt circle: ".... A695748SET...set ORDER TOLL TOLL-FREE

20 Wheel Vintiques Smoothie Wheel and Hubcap Series 10 Chrome Smoothie Wheel A great custom look to your 6-cylinder car. Can be used with stock lug nuts. For chrome baby moon hubcaps, see part #1009 below Falcon 144, 170, 200; Falcon 260 before 4/13/64; Comet 144, 170, 200. All with 14" wheels Backspacing: 4". Bolt circle: ", " ea cylinder with 5-lug, 14" wheels Backspacing: 4". Bolt circle: ", ". Offset: mm. Center bore diameter: " ea Chrome Baby Moon Hubcap Snaps into the center of your chrome Smoothie wheel, giving you a great custom look. For chrome Smoothie wheels, see part #s and above With 14" wheels ea Magnum 400 Wheels and Related Lug Nuts and Center Cap Not Included Typical Magnum 500 Wheel Magnum 500 Wheels and Related Magnum 500 Wheels One-year manufacturer s warranty on finish provided wheels are not abused. For center caps, see part #s C9OZ-1130BK, C9OZ-1130RD or D6OZ- 1130B below. For spinners, see part #MW below. NOTE: May not work on vehicles with oversized brake calipers. NOTE: There is a $25.00 per wheel shipping charge for these items mm ( ") offset; " backspacing. 5 lugs.... MAG14X6...ea mm ( ") offset; " backspacing. 5 lugs.... MAG14X7...ea x mm ( ") offset; " backspacing. 5 lugs. All-chrome... MAG15X7...ea Black alloy with metallic finish rim. Includes center cap and Ford oval decal. 1 4" backspacing " center bore.... MAG15X7AL...ea mm offset; " backspacing. 5 lugs. NOTE: This is a non-stock wheel size. The customer is responsible for determining suitability.... MAG15X8...ea EXTERIOR MAG40015X6BLK MAG40015X6CHAR Magnum 400 Wheels Reproduction 4-lug Legendary Magnum-style CNC-machined alloy wheels, featuring a bold spoke design that is ideal for classic cars and providing ample clearance and more tire options. For center cap, see part numbers HC006, HC007, or HC008 below. For lug nuts / wheel installation kit, see part number LN below " bolt circle. 4" backspacing. Gloss black inlay... MAG40015X6BLK...ea Charcoal inlay... MAG40015X6CHAR...ea HC006 HC007 HC008 Magnum 400 Wheel Center Caps For use on Legendary Magnum 400 alloy wheels. Precision die-cast for a perfect fit. Show-quality finish and correct accent colors. Features an easy-to-install mounting system that works exclusively on the Legendary wheels to eliminate the risk of caps being lost or stolen. Red Ford crest... HC006...ea Black Ford crest... HC007...ea Mercury head.... HC008...ea Magnum 400 Wheel Installation Kit For Legendary 4-lug alloy wheels. Kit includes 16 chrome lug nuts ( 1 2 " 20, " hex) and 4 rubber valve stems with chrome sleeve and cap.... LN kit Wheel Spinners Exact die-cast reproductions of the Motor Wheels original spinners. Set of MW set C9OZ- 1130BK D6OZ- 1130B Center Caps Features the Ford crest. NOTE: Will not fit Styled Steel wheel. Falcon / Ranchero. Early style. Black background.... C9OZ-1130BK...ea Red background.... C9OZ-1130RD...ea Late style. Red background... D6OZ-1130B...ea Magnum 500 Wheel Paint Seal Kit Template to paint Magnum 500 wheels. This kit consists of two sheets of die-cut, peel-and-stick masks that shield the chrome areas when repainting Mag wheels. 13 masks per sheet.... FAM748...kit

21 EXTERIOR 70 C3OZ C5AZ- SP Wheel Cover Spinners Fits 13" and 14" wire wheel covers. Exact reproduction. Chrome die-cast.... C3OZ ea bar spinner with blue center. Used with wire hub cap.... C5AZ-SP...ea Baby Moon Hub Caps Chrome Add a touch of class to your stock wheels. These hub caps are made of strong steel to resist denting and are chrome-plated for lasting beauty. Fits most GM and Ford 14" or 15" stock wheels " inside diameter. Box of set A = 1 2 " 20 B = 1.615" / 1.635" C =.618" /.628" D =.440" /.460" AV14231 D B Wheel Stud 1 2 " ". Grade 8. Screw-in. NOTE: We have marked with a those parts which also fit corresponding Mercury models, such as Comet and Cyclone. A C AV14231 Top Rear.... AV ea C0AZ-1012A S2MS-1012A 91187XLB Lug Nuts Standard.... C0AZ-1012A...ea...55 Magnum S2MS-1012A...ea Comet Cyclone. Chrome plated. 1 2 " 20 RH threads with long body (1 1 2 ") so nuts will extend through wheel cover. Set of XLB...set M c Gard Wheel Locks For 4-lug wheels with 1 2 " lug nuts. Includes 4 lock lug nuts and 1 socket. 20 thread count kit Topline Slide Rule PCD Gauge Topline offers this plastic slide rule gauge helps you measure the distance between lug nuts. Can be used for wheels with 4 to 8 holes.... C402...ea Glass (A) Windshield Glass (A) NOTE: These items ship via truck freight. Please contact us for a shipping quote before ordering Falcon 2- or 4-door sedan, 2- or 4-door station wagon; Ranchero. Green tint with blue shading across top.... DW584GRNS...ea door hardtop, convertible. Clear.... DW635CLR...ea Green tint with blue shading across the top.... DW635GRNS...ea Falcon 2- or 4-door sedan, station wagon; 66 Ranchero. Clear.... DW666CLR...ea Green tint with blue shading across top.... DW666GRNS...ea (B) Windo-Weld Ribbon Sealer Kit For windshields and back glass that are glued in. Kit includes a 15' roll of 5 16 " round black sealer and 2 setting blocks. Use with Windo-Weld Sealer #3M08609 below... 3M kit Windo-Weld Super Fast Urethane Black One-part, moisture-curing adhesive that bonds replacement auto glass to car bodies. OEM strength, easy caulking, fast curing. Please read all label directions before using oz. cartridge... 3M ea Windshield Glass Removal Tool Features a steel cable pull handle. It cuts the butyl adhesive caulking around windows with specially-designed tempered steel blade... WSR ea Windshield Removal Wire Kit Manufactured for cutting and removing front and rear auto glass. Kit contains 213' of 1 4 lb wire, wooden handles and instruction sheet kit Back Glass (B) Tempered glass. NOTE: These items ship via truck freight. Please contact us for a shipping quote before ordering Falcon / Comet 2-door hardtop. Clear.... DB3198CLR...ea Green tint.... DB3198GRN...ea or 4-door sedan. Clear.... DB3522CLR...ea Green tint.... DB3522GRN...ea ORDER TOLL TOLL-FREE

22 B9A-16769A C5ZZ-16763B Radiator Support-to-Hood Bumpers ".... B9A-16769A...pr Rounded.... C5ZZ-16763B...pr Radiator Caps Motorcraft Zinc. 13 lbs RS62...ea Thermocap Radiator Cap Provides better cooling efficiency, indicates coolant temperature and helps prevent coolant-related injuries. Using the temperature gauge, you can easily determine if it is safe to remove the cap. Fits most domestic vehicles. 13 lbs S...ea Radiator Drain Cock Brass. US made. Metal-to-metal seats provide leakproof performance and will take up to 150 PSI pressure. NOTE: Does not fit radiator #3251 (see below) DV31...ea ENGINE / RADIATOR B8A-8100 C4OZ-8100CHR 3259 C7AZ-8100Z C8AZ-8100CHR C9AZ-8100 Reproductions Show Quality S.M.Co. Zinc 14 lbs.... B8A ea lb. Autolite, chrome.... C4OZ-8100CHR...ea Falcon; 65 Comet. Autolite, 13 lb. Zinc.... C7AZ-8100Z...ea Chrome.... C8AZ-8100CHR...ea Zinc. Dearborn style.... C9AZ ea Radiators Copper / Brass NOTE: There is a $10.00 per order boxing fee for these items cylinder. 3 row. Measures 18" 21" " ea cylinder. 3 row. Measures " " " ea , row. Measures " " " ea row. Measures " " 2" ea RS Replacements Ranchero. 7 lb. Not show quality.... RS9...ea Closed system. 14 to 18 lb. Chrome hex cap ea B Billet Aluminum lb.... B ea to 18 lb. Includes o-ring for standard-sized fill neck ea A Aluminum V8. Measures " " " " hose opening ea row. Measures " " ". Inlet and outlet are on opposite sides to accommodate later-year water pumps that were used with 302, 351 and 5.0 L engines. Great for restomod projects ea , 302. Core size: " 17" 2". Inlet size: ", outlet size: ". Cap is located in the center A...ea

23 ENGINE / RADIATOR 72 High-Performance Aluminum Radiators NOTE: There is a $10.00 per order boxing fee for these items. High Performance Aftermarket Features a modern, high-density 2-row core with approximately 2,000 more fins than the original copper radiator allowing for better cooling than your 3- or 4-row radiator. 100% welded seams " " with " outlet and " inlet connection cylinder A...ea MaxCore Original-Style Appearance All-aluminum, high-performance, radiators featuring the classic look that captures the original appearance while improving performance and is a direct fit for the applications listed and has A/T cooler. Has " tubes with 41 tubes per row and 16 fins per inch, for expanded flow and improved cooling, and is 100% tig-welded with a billet filler neck cylinder. 2 core. Core size: 17" W x " H " D, inlet connection: " top right, outlet connection: " bottom right. Weight: 12 lbs AMX...ea core. Core size: 17" W x " H x " D, inlet connection " top right, outlet connection: " bottom right. Weight: 11 lbs AMX...ea cylinder. 2 core. Core size: 17" W x " H " D, inlet connection: " top right, outlet connection: " bottom right. Weight: 12 lbs AMX...ea core. Core size: 17" W x " H x " D, inlet connection " top right, outlet connection: " bottom right. Weight: 11 lbs AMX...ea Radiator Mount Bolts and Nuts Kit of 4 bolts and 4 nuts AK186...kit Radiator Hoses Replacement Continued Molded Rubber Continued , 302. Lower ea before 1/1/70. Upper ea Silicone Set includes upper, lower and bypass hoses. Lower hose features stainless internal spring Falcon / Ranchero 289 / 302 without A/C.... C5ZE-8260/86BK...set Small-Block Swap Upper and lower radiator hoses used on when swapping early 8-cylinder engine to later 302 with the water pump inlet on the driver side. Lower hose includes a stainless spring to prevent collapsing. Hoses are black with no markings C4ZE-8260/ pr AK102 Radiator Hose Clamp Kits Band type. 10 piece kits cylinder.... AK101...kit Small-block V8.... AK102...kit V8RH Radiator Hoses Reproductions Features correct logos cylinder RH...pr V V8RH...pr V V8RH...pr Radiator Hoses Replacement Molded Rubber Falcon / Comet / Ranchero 260 / 289 all; 66 Falcon / Ranchero 289 without A/C; 67 Falcon 289 2/B or 4/B all; Falcon 289, 302 all. Upper ea Stainless Steel Engine Hose Clamp Kit A great way to finish your engine dress-up project. The clamps have the FoMoCo logo stamping (except for 5 16 " 3 8 " size) and feature a worm gear design for tightening. They are also sized correctly so there is no excessive tail overhang. Kit includes: (2) lower radiator "; (2) upper radiator 2"; (6) heater and bypass 5 8 "; (6) fuel line and sending unit 5 16 " 3 8 " (not stamped FoMoCo). Fits most 260 / 289 / 302 / 351W SBFK...kit Radiator Overflow Hose Excellent reproduction. Features three raised ribs, like original, and is 36" long; may require trimming for some applications..... C2AZ-9324R...ea ORDER TOLL FREE

24 C3DZ- 8146D C3DZ- 8146DP C9OZ- 8146B Fan Shrouds V8. Metal. NOTE: Cannot be mounted to the radiator. Requires 4 of mounting bracket #C3DZ-8149B (see below).... C3DZ-8146D...ea Falcon / Ranchero 260, 289; 65 Comet 289. This newly-designed fan shroud is engineered to replace the original steel fan shroud and provide more airflow and greater cooling efficiency than the original thin factory shroud. This shroud is a full " which greatly increases cooling efficiency. May require minor trimming on 6-cylinder cars with P/S and A/C. Must use stock 17" fan blade. ABS plastic. NOTE: Cannot be mounted to the radiator. Requires 4 of mounting bracket #C3DZ-8149B (see below).... C3DZ-8146DP...ea , 302. ABS plastic... C9OZ-8146B...ea Fan Shroud Mounting Hardware Kit 4 screws and 4 nuts. Mounting brackets sold separately (see below) kit Fan Blade 17" High quality, all-steel fan with OE appearance. This heavy duty 35º pitch 17", 6-blade fan will move a large volume of air. Can also be used as a replacement fan. Spacer not included. NOTE: We have no control over installation of optional fan blades with regard to fan clearance and / or engine movement that could cause the fan to damage other components. No payment will be made for damaged parts. The fan will be replaced for defects in workmanship or materials ONLY. Always measure carefully and check the condition of the engine mounts V ea Flex-A-Lite Fan Blades Blue with stainless blades. Standard rotation with an 10,000 RPM rating. Delivers extra cooling at low engine speed and is easy to install. Helps extend fan belt and water pump life. When replacing a clutch-type fan, a spacer may be needed. Please check your original fan s diameter, position and clearance before installing the new fan " ea " ea FAN SPACER " Original style spacer with painted natural finish. Will fit most Ford and Mercury applications. Warning: After fan is mounted, fan needs to have a minimum clearance of 3 4 " from radiator, pulleys, hoses and belts. Please check for clearance ea ENGINE / RADIATOR AK1041 AK1040 C3DZ-8149B MSB001 C3DZ K Fan Shroud Mounting Brackets V8. Used with #C3DZ-8146D and C3DZ-8149DP fan shrouds shown above and 2-row radiators. Requires C3DZ-8149B...ea , 289. Used with 3-core radiator. Set of MSB001...set cylinder. Required for installation of 4-core radiator. Set of 4... C3DZ K...set C2DZ-8600D C5AZ-8600A Fan Blades Falcon 144, 170, 200 without extra cooling and A/C; Comet 144, 170, 200 without extra cooling and A/C. 4-blade " in diameter with a 5 8 " center hole. NOTE: Some 4-blade fans had different diameters, please measure your old fan before ordering.... C2DZ-8600D...ea Falcon 289 with A/T and X/C; Falcon 170, 200, 289 X/C or A/C; 65 Comet 200, 289 X/C or A/C. 5-blade. 17" in diameter with a 5 8 " center hole.... C5AZ-8600A...ea Fan Spacer Bolt Kits With " spacer. Includes (4) " long, phosphate-coated, hex head bolts and (4) lock washers.... AK kit With " spacer. Includes (4) 5 16 " " bolts and (4) lock washers.... AK kit B Thermostats Standard Performance Replacement Brass. 180º ; , 200; ; , 250; B308...ea High Performance Brass / copper. Designed to resist variations in coolant pressure at high RPMs and open at the desired temperature ; , 200; ; , 250; º ea º ea º ea

25 ENGINE / RADIATOR 74 Thermostat Housing Gasket Features hole for bypass tube All 6-cylinder and 260, 289, AP ea C1DZ-8592C C5OE-8592 C3OZ Thermostat Housings Includes gasket , 170, 200. Includes gasket... C1DZ-8592C...ea , 289; ; 65 Comet 289. Exact reproduction with correct casting numbers.... C5OE ea Replacement. Without threaded hole for smog system.... C3OZ ea With threaded hole for smog system ea Chrome Plated Features o-ring style seals to prevent water leaks. Precision die-cast for a great fit, polished to a high luster, then chrome plated for lasting beauty. Come with o-rings and attaching hardware. Looks great with chrome valve covers and air cleaners , ea Straight neck ea Front Side C6AZ-8509A Water Pump Pulleys continued , 302 with air conditioning. Double groove. 5.82" diameter..... C6AZ-8509A...ea FP1464 FP1456 PW114 Water Pumps Aftermarket Falcon 6-cylinder and Comet 144, 170, 200 without A/C; Ranchero 170, FP ea Falcon 260; Falcon 289 aluminum without T/E; Comet; Comet 289 Special, 289 aluminum.... PW114...ea except aluminum without T/E; ; 65 Comet 289 except Special. May need to change water bypass tube when necessary.... FP ea C2OZ-BYP C8AZ-BYP Bypass Hoses V8 Small-block FoMoCo.... C2OZ-BYP...ea Autolite... C8AZ-BYP...ea Front Side Front Side Heater Control Valves 66 Import ea End Detail Rib Detail HH65W HH68R C3OZ-8509B C5OE-8509R Water Pump Pulleys Comet 170 (after 11/16/63) without A/C or P/S; 64 Comet 200 without A/C or P/S; 65 Falcon 200 without A/C or P/S. Single groove.... C3OZ-8509B...ea Falcon 289 except with A/C or X/C, Falcon 289 standard or P/S except A/C and without T/E. Single groove.... C5OE-8509R...ea Here s what our customers are saying about us... Best service in automotive parts, period! Baldomero E. HH69R HH70Y Heater Hoses Original Style 5 8 " I.D. black ribbed hoses with correct date codes, except where noted White stripe. Without date code. Sold in two 4' lengths.... HH65W...pr Red Autolite date code. Sold in 8' length.... HH68R...ea Red Autolite date code. Sold in 8' length.... HH69R...ea Yellow Autolite date code. Sold in 8' length.... HH70Y...ea ORDER TOLL FREE

26 HHBLK Heater Hoses continued Universal 5 8 " I.D. black hoses. Set of two 4' lengths. C5ZZ BLK... HHBLK...pr Silicone Orange silicone interior with a black silicone outer layer that promotes longer life and higher resistance to pressure. Each hose measures " long and 5 8 " I.D. No markings on the exterior. For silicone radiator hose set, see part number C5ZE-8260/86BK on page C5ZZ-18472BLK...pr Heater Hose Clamp " tower style HC209...ea C2OZ B C6AZ S Heater Hose Connectors , C2OZ-18599B...ea , 302. Gold zinc plated... C6AZ-18599B...ea Silver zinc plated... C6AZ-18599S...ea Chrome plated... C6AZ-18599C...ea Brass Freeze Plug Kit 15-piece kit includes 6 brass plugs , 289, kit D3OZ- 6019A C2OZ-6023B Timing Chain Cover Made in the USA.... C4AZ-6019B...ea ; before 12/31/69. Import... D3OZ-6019A...ea Timing Pointer except P/S.... C2OZ-6023B...ea , 289; C2OZ-6023B...ea Windshield Washer Pump Related C5AZ A E0AZ A 75 Pumps C5AZ-17664A...ea Reproduction... E0AZ-17664A...ea Universal Pump Kits Includes pump, reservoir, hose and hardware kit Includes pump, hose and hardware. No reservoir kit Mounting Screws 3 pieces AK429...set ENGINE / RADIATOR / TIMING CHAIN / WASHER Timing Chain and Sprocket Set Features an induction-hardened cast-iron camshaft gear along with a billet steel crank sprocket. The sprocket has three key ways for 4º incremental adjustment (4º advance / retard). Also includes heat-treated, heavy-duty 2-row timing chain. Recommended for mild street applications / KY set Not sure of a term used here? Check out the Glossary in the back of this catalog. C3DZ BF-17615A C0AB-17A601A Windshield Washer Hose and Tee Kits C3DZ kit NOTE: Some hoses may need to be trimmed for proper fit... C6DZ kit C8DZ kit Windshield Washer Tee Connections Wiper hose to foot control.... BF-17615A...ea C0AB-17A601A...ea

27 ENGINE / WASHER / SOLENOID 76 C1VB Windshield Washer Hose Clip Clips the washer hose to the firewall. Attaches to the top of the cowl S...ea C1AZ EAUS C1AZ EA C1AZ E Windshield Washer Reservoirs Falcon before 3/9/64; Comet before 3/9/64. Narrow blue bag with FoMoCo logo.... C1VB ea Before 3/9/64. Black bag with FoMoCo logo and screw-on cap. Made in the USA.... C1AZ-17618EAUS...ea Import.... C1AZ-17618EA...ea Falcon after 3/9/64; 65 Comet all. Black bag with FoMoCo logo in white and a flip-cap. Made in the USA.... C1AZ-17618EUS...ea Import.... C1AZ-17618E...ea Windshield Wiper Motor Electric Includes wiring (plug is a replacement and is not exactly as original). Also includes an adapter plug for the under-dash harness. NOTE: Electrical parts are non-returnable once installed. We will replace defective units only C6OZ-17508D...ea Starter Solenoid Mounting Screw Set Set of AK266...set Starter Solenoids 6001BLK US Made Exact Reproductions FoMoCo script, brown body BRN...ea FoMoCo script, black body BLK...ea Starter Solenoids C7OZ-17618A C9OZ Molded plastic... C7OZ-17618A...ea Molded plastic. Does not include lid; must reuse old one.... C9OZ ea BLK 6006BLK US Made Exact Reproductions FoMoCo block lettering, black body BLK...ea Autolite, black body BLK...ea C1AZ B8S-17632A C7AZ-17632A Windshield Washer Reservoir Caps Aluminum.... C1AZ ea Falcon used with reservoirs that feature the spout at the bottom; Comet used with a soft plastic bag.... B8S-17632A...ea Plastic... C7AZ-17632A...ea C4AZ AK122 Windshield Washer Reservoir Mount Bracket and Screws Bracket Before 10/16/ C4AZ ea Screws Set of AK122...pr BLK 6007BLK Reproductions Autolite, black body. Stamped C4AF A BLK...ea Stamped C7AF A BLK...ea Replacement Falcon; Ranchero; Comet. Import.... SW3-AR...ea ORDER TOLL FREE

28 Batteries and Related NOTE: Electrical parts are non-returnable once installed. We will replace defective units only. All batteries carry a $39.95 shipping fee. Batteries Sealed Maintenance-free Painted exactly as the OEM Ford-designed Autolite batteries, with the top script painted red and the front script unpainted. Features authentic-looking, S24F non-removable battery caps that actually have a small pressure-relief valve designed into them to keep the battery at proper operating pressure. These valve-regulated batteries operate within the same voltage ranges as regular wet batteries and can be charged with a conventional charger. Requires no maintenance, ever. A fully-automatic charger is recommended to eliminate the possibility of overcharge. A battery maintainer (see next page) is recommended when storing your vehicle for more than 90 days. 4-year pro-rated manufacturer s warranty. Must retain invoice. Shipped fully charged cranking amps at 32º F, 700 cranking amps at 0º F " " 9"... S24F...ea cranking amps at 32º F, 750 cranking amps at 0º F. 12" " 9"... S27F...ea Autolite Battery Cover FCOVER...ea C2DZ C Anti-corrosion Battery Washers Slips over battery stud before cable end is installed. Keeps your battery looking clean.... AP15...pr C5DZ A C5AZ-10718A B10718BL Battery Clamps 22F C2DZ-10718C...ea F With C3AZ tray.... C5DZ-10718A...ea With C3AZ-10764B tray.... C5AZ-10718A...ea Billet... B10718BL...ea C5AZ-10718A...ea Billet... B10718BL...ea Here s what our customers are saying about us... Your products are top notch. Sam D. C3DZ-10732G C6OZ C3AZ C3AZ B C7OZ B C6OZ-10732D D0OZ-10732B Battery Trays Falcon 6-cylinder except with A/C after 1/7/63; Falcon V8 except with A/C; Comet 6-cylinder without A/C after 1/7/63; Comet V8 with or without A/C; 65 Comet 6-cylinder without A/C; 65 Comet V8. With lower bracket.... C3DZ-10732G...ea Without lower bracket, must use old bracket.... C3AZ ea With lower bracket. Accepts size 24F battery.... C3AZ-10764B...ea Small-block. For use with 24F battery. Without lower bracket.... C6OZ ea With lower bracket... C7OZ-10732B...ea , 289 all; all. With lower bracket. For use with 22F battery.... C6OZ-10732D...ea With bracket... D0OZ-10732B...ea Battery Tray Mounting Kit 8 pieces AK244...kit AK232 D0AZ-10756A 77 D0AZ-10756SS Battery Tray-related Hardware Battery Clamp Bolt Kit For use with Battery Clamp #C5DZ-10718A (see previous column) AK232...kit Battery Hold-down J-bolts Includes nuts With C3AZ-10764B tray. Requires 2 per vehicle.... D0AZ-10756A...ea Stainless steel... D0AZ-10756SS...pr Requires 2 per vehicle.... D0AZ-10756A...ea Stainless steel... D0AZ-10756SS...pr Negative Battery Cable Switch Keeps battery charged without having clocks and accessories drain the battery while parked for extended periods.... NEGSW...ea ENGINE / BATTERY

29 ENGINE / BATTERY / VOLTAGE REGULATOR 78 Battery Maintainer by Schumacher Fully automatic with float-mode monitoring. Ideal for maintaining stored batteries. Keeps store, lead acid batteries charged. It maintains the battery when fully charges and resumes continuous charging when battery becomes discharged. Features 6 foot power and output cords for a combined 12' reach. 1.5 amp ea Priority Start When key is off, this device monitors, detects and automatically disconnects any drain on the battery. Turn key to start and it automatically reconnects, starting safely from inside your vehicle. Fits any 12 volt vehicle application.... PSIDP12...ea C3DZ C4DZ-14300A Battery Cables cylinder before 1/21/ C3DZ set V8... C3DZ-14300B...set cylinder....C4DZ-14300A...set V8.... C4DZ-14300B...set Includes positive, negative, and starter cables. 6-cylinder.... C5DZ-14300A...set Includes positive, negative, and starter cables. V8.... C5DZ-14300B...set cylinder... C6DZ-14300A...set V8... C6DZ-14300B...set cylinder... C7DZ-14300A...set V8... C7DZ-14300B...set or 8-cylinder... D0DZ set Voltage Regulator Mounting Screws Set of AK266...set Voltage Regulator Socket and Wiring For use on all vehicles with alternator. A replacement socket and wiring harness, to replace an OEM socket. Has 6 wires coming from it ea Voltage Regulator Terminal Cover Installed by the factory on all Fords with generators. Snaps over the regulator terminals. NOTE: Fits original Ford regulators only With generator... C2AF-10A555A...ea C4UF-FOMOCO C5AF-FOMOCO C5AF-AUTOLITE D0AF-10316A Voltage Regulators For Alternator Show Quality Reproductions 38 / 42 Amp 63 Without A/C. Black with blue print.... C3XF-FOMOCO...ea Without A/C. Black with silver print and FoMoCo script.... C4UF-FOMOCO...ea Before 12/64 without A/C. Black with silver print and FoMoCo script.... C5AF-FOMOCO...ea Without A/C. Black with silver print and Autolite logo.... C5AF-AUTOLITE...ea Without A/C. Blue with silver print and Autolite logo.... C8AF-AUTOLITE...ea Without A/C. Blue with silver print and Autolite logo. Show quality.... D0AF-10316A...ea C5TF-FOMOCO C5TF-AUTOLITE C8TF / 55 Amp 63 With A/C. Black with yellow print and FoMoCo script....c3tf-fomoco...ea Before 12/64 with A/C. Black with yellow print and FoMoCo script.... C5TF-FOMOCO...ea After 12/64 with A/C. Black with yellow print and Autolite logo.... C5TF-AUTOLITE...ea With A/C. Blue with yellow print and Autolite logo. Show quality.... C8TF ea Replacement Electronic With alternator.... GR540AHD...ea Can t decide on a gift idea? How about an Auto Krafters Gift Certificate? They are available in your choice of dollar amount. Check online or ask your sales associate today. ORDER TOLL FREE

30 79 PA70 PA70-1 PA70-N PA70-1N New Aftermarket Alternators Includes pulley and fan. 1-year manufacturer s warranty. Defective alternator must be returned in its original box. 70 Amp Chrome Plated Fits most vehicles with alternators that have a small case.... PA70...ea Fits most vehicles with original equipment small-case alternator (ear holes 6.875" center-to-center) and an external regulator. Features only 1 wire from the alternator to the battery, there-by eliminating your firewall-mounted regulator.... PA ea Natural Finish With small case alternator.... PA70-N...ea Amp Features only 1 wire from the alternator to the battery, thereby eliminating your firewall mounted regulator. Chrome Plated Fits most vehicles with original equipment small-case alternator (ear holes 6.875" center-to-center) and with an external regulator.... PA ea Natural Finish PA70-1N...ea Alternator Fan 10 blades After 10/ D0AZ-10A310B...ea D1TZ A C9OZ A D0OZ A Alternator Brackets Reproductions Painted black and stamped with Ford logo and engineering number , 302. Upper.... D1TZ-10156A...ea Lower.... C9OZ-10145A...ea , 351C... D0OZ-10156A...ea CP5185 MG5185 Aftermarket Sets include adjustment arm and top bracket , 302. Black... CP set Chrome... MG set Generator-to-Alternator Conversion Brackets Bracket set to convert from a generator to an alternator Falcon 6-cylinder... C0DZ-10156SET...set Alternator Spacer 1" O.D. 1.64" long. Black C5AE-10A370A...ea ENGINE / ALTERNATOR C5AZ-10344H C5AZ-10344K C5AZ-10344L Alternator Pulleys " Hi-Po. For use with Hi-Po pulleys. Solid steel... C5AZ-10344H...ea Falcon / Comet 289 with 42 amp alternator. Gold finish. Single groove.... C5ZZ-10344AR...ea With single-pulley alternator. 2.62". Stamped zinc dichromate gold.... C5AZ-10344K...ea With double-pulley alternator. 2.62". Solid steel for quieter operation and better durability.... C5AZ-10344L...ea C5AL-643 C7AL-644 Alternator Pulley Nuts and Washers Clear zinc... C5AL ea Gold zinc... C7AL ea C5AL-1133 C6AL-622 Alternator Mounting Kits Kits include washers and bolts. 65 Falcon 289 and steel spacer. 6 pieces... C5AL kit Falcon 289 less spacer. 5 pieces... C5AL kit Falcon 289 without smog. 6 pieces... C6AL kit C1AZ B C4OZ C Generator Splash Shields Falcon; Comet. Generator end.... C1AZ-10170B...ea Outer splash shield. Staples included.... C4OZ-10170C...ea

31 ENGINE / ALTERNATOR / AIR CONDITIONER 80 C5GY B C3DZ B C5DZ B C4DZ B Generator and Alternator Harnesses 63 6-cylinder with generator.... C3DZ-14305A...ea Late 63 V8 with generator.... C3DZ-14305B...ea cylinder with generator.... C4DZ-14305A...ea Falcon V8 with generator.... C4DZ-14305B...ea Comet V8 (except 289HP) with generator.... C4GY-14305B...ea Comet with alternator and gauges (will not work with warning lights).... C5GY-14305B...ea cylinder with alternator.... C5DZ-14305A...ea V8 with alternator... C5DZ-14305B...ea Alternator Terminal Covers Package of C7AZ-10A375A...pkg Air Conditioning Components Perfect Fit In-dash A/C System This new, in-dash heat / cool / defrost system uses only the highest-quality, latest-technology components and is computer designed for a perfect fit every time. Uses factory heater controls, along with stock vent locations. Large, separate cooling and heating coils provide superior performance during the extreme periods of summer and winter. The highly efficient, state-of-the-art Sanden compressor is attractive under the hood, and original reproduction parts installed in factory-provided locations mean easy installation and higher resale value. 1-year manufacturer s warranty on compressor; 90-day manufacturer s warranty on the rest of the system ea...1, Engine Fan Use with A/C system # above. NOTE: We have no control over installation of optional fan blades with regard to fan clearance and / or engine movement that could cause the fan Typical Fan to damage other components. No payment will be made for damaged parts. The fan will be replaced for defects in workmanship or materials ONLY. Always measure carefully and check the condition of the engine mounts cylinder. 16", 6-blade ea Perfect Fit In-dash A/C System continued Water Pump Pulley Use with A/C system # (see previous column) , 302 with P/S WPP...ea Sure Fit A/C System This A/C, heating and defrost systems is designed specifically for each application, matching the coil and blower to give you the maximum amount of comfort in your vehicle. System features: mounts completely behind dash A/C exits through dash vents or custom louvers heat exits at floor dehumidified defrost The Sure Fit System comes complete with everything you need: Evaporator Kit: Air conditioning, heating and defrost mount to existing holes in your dash and firewall without drilling or fabrication. Evaporator kit comes complete with all mounting brackets, hardware louvers, duct hose, wiring harness and installation instructions. Condenser and Dryer Package: Attaches to existing mounting holes; no drilling or fabrication required. Comes complete with condenser, mounting brackets, standard dryer, pre-formed aluminum lines and mounting hardware. This is an R134a system. NOTE: Please supply the following information when ordering: Note if the crank shaft has a 3- or 4-bolt pulley If the damper has a lip, please supply the O.D. The height and width of the radiator The vehicle type and year and the engine size With or without power steering NOTE: If the vehicle has factory power steering, you must use power steering bracket # (see below) Falcon / Ranchero ea...1, Power Steering Bracket for Sure Fit System Falcon / Ranchero 289, 302, 351W with factory power steering ea Sanden A/C Compressor Conversion Kits Stop robbing horsepower from your classic engine when you turn on your A/C. A new efficient Sanden rotary compressor will reduce the load on your motor and eliminate half the weight and bulk of a stock compressor. If you drive your classic Ford, this conversion is a must for you. (Also, this would be an opportune time to change to R-134a refrigerant.) Excellent attention to detail makes for a very attractive under-the-hood appearance Kits Kits include a Sanden compressor, clutch, required adapter brackets, hoses, and a filter dryer. For use on vehicles with factory A/C cylinder With R-134a kit V8. With R-134a kit ORDER TOLL FREE

32 Sanden A/C Compressor Conversion Kits Continued V8 Kit This kit includes a Sanden compressor, V-belt clutch, all required compressor and idler adapter brackets, hoses, O-rings and oil tube. NOTE: Customer must send in filter drier to be rebuilt and converted to R-134A. Dryer rebuild is not included in kit price. For dryer rebuild, see part #FILDRYRB (next column). Please specify year, model, and engine size when ordering. 1 year warranty. R-134a... SCCR134A...kit Typical Tecumseh Compressor A/C Compressors Remanufactured Cast-iron. Remanufactured on an assembly line. Exact replacements. Specify year when ordering. 90-day manufacturer s warranty when replaced with a filter dryer. Sold with or without exchange. Does not include compressor clutch, clutch brushes, or service valves. 134a refrigerant only. NOTE: Data plates are not available for judging Tecumseh (cast-iron) ea PLP 513FRDM A/C Compressor Cover Plates Finned cast aluminum. Fits all York and Tecumseh A/C compressors. Includes mounting hardware. Plain... Polished finish plp...ea Shown Installed... Matte finish plm...ea Ford oval Polished finish FRDP...ea Matte finish FRDM...ea A/C Clutch Brush Set All set A/C Compressor Crank Shaft Seal Kit With York compressor.... C9AZ-19655B...kit A/C Evaporator Discharge Hoses cylinder ea V ea A/C Suction Hoses 65 V ea cylinder ea V ea A/C Evaporator Sight Glass Hose ea A/C Line Grommets For use on evaporator to compressor lines With hang-on A/C. Requires 1 or 2 pair per vehicle S...pr Non-adjustable Idler Controls rumble and vibration caused by belt slap. Exact reproduction ea ENGINE / AIR CONDITIONER Compressor Mounting Brackets cylinder. Includes adjuster and support. With alternator ea V8. With generator ea With alternator ea V8 dog leg bracket. With generator ea With alternator ea A/C Filter Dryer Exact reproduction of original ea Filter Dryer Rebuild Service Send in your original A/C filter dryer, and we will rebuild it for you. Your filter dryer is cut open, old filters and drying agent are removed, then it is glass-beaded inside and out, new filters are installed, gets tig-welded back together and pressure tested, capped, painted. Backed with a 90-day manufacturer s warranty against leaks. Please allow 3 to 4 weeks plus shipping time for rebuild. When ordering, please specify R-12 or R-134a refrigerant and year, make and model of your vehicle. NOTE: Customer must supply core for rebuild.... FILDRYRB...ea

33 ENGINE / AIR CONDITIONER / STARTER / OIL Service Valves Flared fitting for hoses and roto-sealed at compressor. #8 small valve. Requires 2 (1 in discharge line and 1 in suction line) ea Both flared fitting for hoses and roto-sealed at compressor. #8 small valve used in discharge line ea #10 large valve used in suction line ea Both o-ring fitting for hoses and roto-sealed at compressor. #8 small valve used in discharge line ea #10 large valve used in suction line ea Both o-ring fitting for hoses and o-ring seal at compressor. #8 small valve used in discharge line ea #10 large valve used in suction line ea Expansion Valve C9ZZ ea A/C Condenser This is a judging competition-quality reproduction. It has the same flat extrusion as the original. An excellent choice to make if your original has seen better days or you re converting to R-134a refrigerant. This condenser is a very key element in maintaining proper system pressures, cold temperatures and compressor longevity ea Starters Remanufactured Falcon ; ; A/T; A/T; A/T ea ; A/T ea M/T; ; M/T ea CORE FEE for ALL above starters...ea New Starter Comes clocked from the manufacturer to fit most applications. The mounting block can be re-clocked as required. Includes spacer ring and instructions. 90-day manufacturer s warranty for street applications Falcon 289, 302; 65 Comet 289. All with A/T or 5-speed M/T FX...ea Starter High Torque, Geared This 180 foot-pound starter has power for up to 12:1 compression with no heat soak problems, clears the oil pan and has a 4.4:1 gear reduction ratio. Includes billet aluminum adapter block, mounting bolts and instructions. Weighs 10.5 lbs. 1-year manufacturer s warranty for street applications Falcon 289, 302; Comet 289, 302; 65 Cyclone 289, 302. A/T ea or 4-speed M/T ea speed M/T ea Starter Cable Bracket with Grommet Falcon 260, 289, BC-9...ea C4DZ-6675B D0OZ-6675 D1ZZ-6675C Oil Pans Falcon 144, 170, 200; Comet 144, 170, C4DZ-6675B...ea Falcon 260; Falcon 289; Falcon 302; 64 Comet 260, 289. Blue.... D0OZ ea C, 351 Special... D1ZZ-6675C...ea Cal Custom Finned Fully polished aluminum. Includes magnetic drain plug. For engines with front oil sump ; ; D0OZ-6675AL...ea OS13260C Oil Pan Gaskets Made of a fibrous material with a rubber binder. Withstands temperatures to 350º F. Sets include LH and RH gaskets as well as front and rear seals , 170, set ; ; OS13260C...set C set Rubberized Cork 1-piece gasket ea ORDER TOLL FREE

34 Oil Pan Gaskets Continued Ultra-Seal 1-Piece Made of cellulose / nitrile composition material and is coated with black latex. This coating assists in sealing along minor irregularities in the oil pan rail. Excellent replacement for OE as well as high-performance applications. Gasket is one piece with molded front and rear seals. Kit includes gasket and bolts , kit Oil Pan Bolt Kits Contains (6) 5 16 " 18 x 3 4 " bolts and (18) 1 4 " 20 x 1 2 " bolts. Grade 5 zinc-plated bolts with hex flange heads. 289, kit D6TZ- 6730R Oil Pan Drain Plugs 1 2 " stud. Includes gasket. Reproduction 5 8 ", painted blue D6TZ-6730R...ea Replacement Magnetic. Accumulates metal particles found in oil, preventing possible damage to engine ea Oil Pump Screen Assembly Oil pump screen and tube assembly. Includes a gasket. For oil pan, see part #D0OZ-6675 on the previous page , 289, S...ea (A) (B) (C) (D) (E) Oil Filters Red Rotunda, high quality reproduction. Contains a genuine Ford Motorcraft element inside the reproduction housing. Red and white lettering exactly as original. (A)... C1AZ-6731AR...ea Gold Rotunda reproduction. (B)... C1AZ-6731AG...ea Autolite white. (C)... C1AZ-6731A...ea Motorcraft filter. (D)... FL-1A...ea Ford Racing Performance Parts. Genuine Ford. (E)... M6731FL1A...ea Chrome Oil Filter This show-quality, triple process, hand-polished chrome filter exceeds all OEM specifications and removes engine damaging particles. Features include roll formed threads for precise spin-on fit, triple process chrome that won t peel or flake, pleated element design to increase filtering area. Also, a steel back-plate for added protection against pressure surges, a gasket retainer and sealing gasket to prevent leaks, a heat-cured, resin-impregnated element to remove harmful particles and a rolled seam housing that withstands over 200 PSI Ford V8s with spin-on filter ea SW667 SW1547B SW669 SW1311 Oil Pressure Sending Units Falcon; Comet.... SW667...ea Comet with gauges (not warning lights).... SW1547B...ea Before 4/10/67 with warning lights (not gauges).... SW669...ea SW ea C2OZ- 9B339A 83 C2OZ- 9B339CH Oil Pressure Sending Unit Extensions 65 Comet 289. Zinc.... C2OZ-9B339A...ea Chrome.... C2OZ-9B339CH...ea C3OZ-6750B Oil Dipsticks Falcon 144; Falcon 170 after 7/3/61; Falcon 200; 64 Comet 170; Comet 200; Ranchero 144; Ranchero 170 after 7/3/ C2DZ-6750B...ea except 40 or 60 amp alternators.... C3OZ-6750B...ea Flexible Oil Dipstick Features a machined aluminum handle, braided tube and an easy-toread stainless stick. Includes mounting bracket Falcon 289, 302; Comet 289, 302; 65 Cyclone 289; Ranchero 289, 302. All with the dipstick through the timing chain cover.... ED ea ENGINE / OIL

35 ENGINE / OIL 84 C2OZ-6754A C8AZ-6754A C5AZ-6754AR C8AZ-6754C Oil Dipstick Tubes Black... C2OZ-6754A...ea /B. Black... C5AZ-6754AR...ea Falcon 289, 302. Blue... C8AZ-6754A...ea Chrome... C8AZ-6754C...ea Oil Dipsticks and Tubes , 289, 302. Chrome handle stick, tube and adjustable bracket. Gold iridite finish on the stick itself will not flake. Markings match original equipment ea , 289, 302. Billet dipstick, tube and adjustable bracket. Features a tube base made to OE specifications for a correct fit ea Universal Oil Breather Caps Chrome. Will fit most applications. Push-on ea Twist-on ea Oil Filler Caps C5ZZ-6766A EC-31FB C8AZ-6766A D1AZ-6766A Black (before 3/18/63) 144, 170, 200; , 289 2/B; , 200, 289; , 289 Special before 5/2/66. FoMoCo script logo on top. Push-on without spout.... C5ZZ-6766A...ea With closed emission. FoMoCo block logo on the top. Push-on with tube.... EC-31FB...ea ; With closed emission. Twist-on with elbow. Includes grommet in the top of the cap.... C8AZ-6766A...ea , 351W, 351C. Twist-on. Autolite logo stamped on top. Includes elbow and 2 grommets... D1AZ-6766A...ea Oil Filler Caps Continued C5ZZ-6766E C5ZZ-6766B C8AZ-6766B D1AZ-6766C Chrome Reproduction of the Shelby Mustang oil cap. FoMoCo script logo on the top. Push-on with tube.... C5ZZ-6766E...ea before 3/18/63 144, 170, 200; , 289, 289 Special 2/B; ; , 289 Special. Push-on. Reproduction with FoMoCo script logo on top.... C5ZZ-6766B...ea ; With closed emission. Twist-on Autolite logo on the top. Includes grommet in the top of the cap. With plastic elbow... C8AZ-6766B...ea With metal elbow... C8AZ-6766BC...ea , 351W, 351C. Twist-on. Autolite logo stamped on top. Includes elbow and 2 grommets... D1AZ-6766C...ea Billet Replacement Fits valve covers with a " filler hole. Plug-in style ea Fits valve covers with a twist-lock type filler hole. Includes gasket ea M6766B302 M6766A302 Crankcase Ventilation Breather Caps Direct replacement parts Small-block with open crankcase. With Ford Racing logo on top. Push-in.... M6766B302...ea With Ford Motorsport logo on top. Twist-in.... M6766A302...ea Oil Filler Cap Adapter Allows you to use a push-on type oil filler cap with a twist-on type filler hole. Includes gasket.... C5AZ-6A868A...ea Auto Krafters catalogs are now available online in PDF format! Just visit our website at ORDER TOLL FREE

36 Front Side Front Side C2OZ-6A312A C5AZ-6312B Crankshaft Pulleys Front C5AZ-6312E Side Single Groove Falcon 170 / 200 after 3/2/64; Comet 170 / 200; all with P/S or A/C " O.D. Natural finish.... C2OZ-6A312A...ea /B or 4/B. Groove diameter is " and requires a 3 8 " belt. Painted black.... C5AZ-6312B...ea Double Groove with P/S, X/C. Both grooves have a diameter of ". Painted black.... C5AZ-6312E...ea HB3121 HB3124 Harmonic Balancer Repair Sleeves ; ; HB ea ; ; ; HB ea C2DZ-6312A C5AZ-6316B Replacement Carburetor New aftermarket replacement 2-barrel 2100 carburetor, 300 CFM, with electric choke. Mounting gasket included. Does not include instructions. Imported. NOTE: Professional installation recommended / 302 / ea HC7448 HC80457S 85 HC1850C Holley Carburetors /V, 350 CFM. Stock performance replacement. Features include a manual choke, 30 cc accelerator pump, one timed (spark) port and one PCV port. Includes mounting gasket, hardware and installation instructions. Attention: DOES NOT work with automatic overdrive transmissions... HC ea V8. 4/V, 600 CFM. Electric choke. Calibrated for excellent street performance. 50-state emission legal. Shiny finish.... HC80457S...ea V8. 4/V, 600 CFM. Manual choke with power valve blow-out protection and vacuum secondaries. Includes a fast idle adjustment and PVC spark ports, carburetor to engine gasket, air cleaner gasket, 2 fuel fittings with gaskets and instructions. Classic finish... HC1850C...ea ENGINE / HARMONIC BALANCER / FUEL C8AZ- 6316A D2OZ- 6316A C3UZ- 9A589B C3OZ- 9A589C Harmonic Balancers Falcon 144, 170 without A/C; Falcon 144, 170, 200; Falcon 170, 200; Falcon 170, 200, single groove; 70 Falcon through 12/31/69 6-cylinder, single groove Comet 144, 170 without A/C; Comet 144, 170, 200 except with 3-point single belt drive with A/C; 65 Comet 200 without P/S " pulley diameter, 3 holes spaced.... C2DZ-6312A...ea , ". Features a 28.4 oz. counterweight and is made to the early style short length. Includes both 3- and 4-bolt pulley patterns as well as three sets of timing marks ea and 68 Falcon 289; 67 Falcon 289 and regular fuel; 65 Comet 289 except Special " diameter. 3 bolt.... C5AZ-6316B...ea " diameter " long overall.... C8AZ-6316A...ea " diameter. 4-bolt.... D2OZ-6316A...ea Carburetor Spacers / Base Plates Falcon / Ranchero 6-cylinder without IMCO; 65 Falcon 170; Falcon 170 / 200 with T/E; Comet 200 without IMCO.... C3UZ-9A589B...ea Falcon 289 4/V; 68 Falcon 302 4/V; Comet 289 4/V.... C3OZ-9A589C...kit Falcon C4 with T/E (before 1/15/68);... C3UZ-9A589B...ea C C3DZ- 9447A Carburetor Spacer / Base Plate Gaskets /B C...ea Falcon / Ranchero 6-cylinder without IMCO; 65 Falcon 170; Falcon 170 / 200 with T/E; Comet 200 without IMCO. Requires C3DZ-9447A...ea

37 ENGINE / FUEL 86 Carburetor Spacer / Base Plate Gaskets Continued 68 Falcon C4 with T/E (before 1/15/68).... C3DZ-9447A...ea KIT 2100KIT Carburetor Repair Kits For Ford, Autolite and Motorcraft carburetors With model /V carburetor KIT...kit With model /V carburetor KIT...kit / 200 with Carter model YF 1/V carburetor.... 1BBL-YFKIT...kit C3AZ-9741A C7OZ-9741A Carburetor Return Spring Brackets 66 With C4... C3AZ-9741A...ea /B; /B; , 351C 2/B.... C7OZ-9741A...ea Carburetor Vacuum Line Please add SS to the end of the part number for stainless steel. Original Stainless cylinder... FLE Distributor Vacuum Line Please add SS to the end of the part number for stainless steel. Original Stainless cylinder... LDV Accelerator Rod-to-Transmission Control Shaft Kit Includes 2 clips and 2 studs C5ZZ-9784A...kit Accelerator Linkage Rod Clip With bellcrank / rod type accelerator linkage.... B7A-9825B...ea Hi-Po Choke Cable Assembly High quality reproduction. Includes correct knob, bracket, cable and cable covering. 65 Comet.... C5ZZ ea B7A-9793A C2DZ-9793 C4DZ-9793A C6OZ-9793A Accelerator Pedal Rod Seals B7A-9793A...ea C2DZ ea C4DZ-9793A...ea C6OZ-9793A...ea Fast Idle Cam Lever For Autolite Carburetors Only Straight arm.... C4AZ-9F577B...ea C5AZ-12370A D2PZ-12370A Distributor Vacuum Controls N.O.R.S. NOTE: There is some light oxidation on some units, but this will not affect their function. 63 Comet V8.... C5AZ-12370A...ea Falcon V8; 65 Comet V8.... C5AZ-12370A...ea cylinder 3-speed M/T with T/E or C4 A/T with IMCO; 70 6-cylinder A/T... D2PZ-12370A...ea Typhoon Intake Manifolds Aluminum , 302. Polished. Includes hardware ea Satin finish ea Accelerator Bellcrank-to-Carburetor Rod Includes 2 clips and 2 studs Falcon 170, C6OZ-9772A...ea Intake Manifold Hardware Kit 12-point head stainless steel bolts. Necessary for the installation of Typhoon Intake Manifolds above , kit ORDER TOLL FREE

38 Edelbrock Intake Manifold and Gaskets Intake Manifold Made in the USA , 302 without EGR ea Manifold Gasket Set For use with intake manifold part #2121 above set Intake Manifold Gaskets Set features WhiteSeal Technology that brings a new standard in quality to aftermarket gaskets. Includes 2 intake gaskets, end seal and distributor O-ring , 289, set Throttle Return Spring Falcon 289; 68 Falcon C5ZZ-9737B...ea TCU TCHT Universal Throttle Cables 36" Stainless braided housing. Kit contains all hardware and fasteners kit " 20 thread on connection kit " These are not a direct factory replacement. May require modification. Stock cable... TCU...ea Braided cable... TCHT...ea FG2 C4AZ-9365B 87 ENGINE / FUEL FG14C Universal Throttle Spring Kit Triple chrome plated. Use the dual springs for additional return response needed with any high performance carburetor kit Universal Throttle Return Spring Bracket Triple-chrome plated and designed for multiple mounting points and easy to install. For springs, see part #4700 above ea Fuel Filters Inline.... FG2...ea Filter for canister.... C4AZ-9365B...ea or 8-cylinder with screw-in filter in front of carburetor. Fine thread... FG14C...ea Chrome Aluminum High-Performance Filter Adds a finishing touch to your engine compartment. Features a replaceable element and includes 2 chrome-plated clamps for installation. Not for fuel-injected systems. Fits 3 8 " fuel hose ea SP2418 SP24283 Universal Throttle Cable Brackets Easy to install. Features adjusting screw to maintain proper alignment of throttle cable. Chrome finish. All 2/B and 4/B. Without A/T kick-down cable bracket.... SP ea With A/T kick-down cable bracket.... SP ea C3AZ- 9355A C3AZ- 9355G Fuel Filter Canisters Screw-on White with red FoMoCo block logo.... C3AZ-9355A...ea Gold zinc... C3AZ-9355G...ea

39 ENGINE / FUEL M4009 M60387 M6588 M6878 C2DZ-9275A C2DZ-9275B C4DZ-9275A C4GY-9275A Fuel Pumps , 170, ea , M ea , M ea Hi-Po... M ea , M ea M ea M ea C8ZZ-9275C C6DZ-9275A Holley Fuel Pump Has a PSI pre-set shut-off, 80 GPH (Gallons Per Hour) capacity and its solid construction is great for continuous high RPM operation. Can be rotated for various plumbing designs. Includes gasket. NOTE: This product is not legal for sale or use in California except on pre 66 model vehicles ; ea Fuel Pump Mounting Gasket Replacement; not Ford Falcon all; Falcon except 351; 65 Comet 289, C3AZ-9417CNOS...ea Electronic Fuel Pump For all carburetor-equipped vehicles. Easy to install. 12 volt. Compatible with all fuels and additives and eliminates vapor lock. Solid state 2-wire design. Self-priming.... PRO12S...ea Fuel Pump Block-off Plate This chrome plate is used block the fuel pump mounting hole on the engine block when a vehicle is upgraded from a mechanical fuel pump to an electronic, in-tank pump. Stamped with the Ford oval logo. Mounting hardware and gasket not included , M9351A302...ea AUTO KRAFTERS PRICE MATCH GUARANTEE We pride ourselves in offering the best quality parts at the lowest prices possible. If our prices are not already lower, we will match any competitor s price on like-quality parts. Prices matched must be current and verifiable from the competitor s web site. Price corrections must be made before purchase is made. No refunds on previous orders. D0OZ-9275K Fuel Tank Sending Units Falcon all except station wagon, sedan delivery and Ranchero; Comet. Includes gasket.... C2DZ-9275A...ea station wagon, sedan delivery, Ranchero; Comet 6-cylinder station wagon; 64 6-cylinder station wagon.... C2DZ-9275B...ea sedan delivery and Ranchero; 64 Falcon / Comet 8-cylinder station wagon; 65 station wagon, sedan delivery and Ranchero. Includes gasket.... C4DZ-9275A...ea Comet except station wagon.... C4GY-9275A...ea Falcon except station wagon, sedan delivery and Ranchero. Includes gasket... C8ZZ-9275C...ea Falcon except station wagon and Ranchero. Includes gasket.... C6DZ-9275A...ea Falcon station wagon; Falcon station wagon without low fuel warning; 66 Ranchero. Includes gasket... D0OZ-9275K...ea C0AF-9276A C0AZ-9A307B Fuel Tank Sending Unit Parts Gasket C0AF-9276A...ea Locking Ring C0AZ-9A307B...ea Float Brass end with solid core float. Won't sink due to pinholes like hollow type. 2" long " O.D " I.D. grove where sender arm clips onto float. Float may be smaller where it clips on than your original, may require slight modification to sender arm ea ORDER TOLL FREE

40 D1AZ- 9A011A D1FZ- 9A011A Fuel Tank Sending Unit Parts Continued Filters " tube... D1AZ-9A011A...ea " tube... D1FZ-9A011A...ea RG24 C3DZ- 9030A RG40 C5DZ-59405B C1DD-9034A C0DD-9034F C4DZ Fuel Filler Pipes Includes pipe, gasket, and outer flange Falcon sedan, hardtop, and convertible.... C1DD-9034A...ea Falcon station wagon, Ranchero; Falcon sedan delivery.... C0DD-9034F...ea Falcon station wagon, sedan delivery, Ranchero.... C4DZ ea ENGINE / FUEL Back C4DZ-9030A Back C5DZ-9030B C5DZ-9030 Fuel Caps All except station wagon, sedan delivery, and Ranchero. Exact reproduction of original for Futura. Suitable replacement for C3DZ-9030A...ea Falcon except station wagon and sedan delivery; Ranchero. All non-locking.... RG24...ea Comet except station wagon. Vented. Anti-surge.... RG40...ea Falcon 2- and 4-door station wagon (standard), Squire and Futura; 64 Ranchero (standard and Deluxe); 64 Falcon sedan delivery (standard and Deluxe); 65 Falcon 2- and 4-door station wagon (standard); 65 Falcon Squire 4-door wagon; 65 Ranchero (standard); 65 Falcon sedan delivery (standard). Die-cast exact reproduction, featuring a stamped steel backing plate with vent, seal, chrome handle and hardware. Ready to prep and paint.... C4DZ-9030A...ea Falcon Futura 4-door station wagon; Ranchero Deluxe. Cap Assembly Die-cast exact reproduction, featuring a stamped steel backing plate with vent, seal, chrome handle and hardware. Ready to prep and paint.... C5DZ-9030B...ea Chrome Handle Exact reproduction of the original. CNC machined from billet aluminum and chrome plated, this handle can replace damaged or pitted handles and can also be mounted on standard caps for an upgraded Deluxe look. Includes mounting hardware.... C5DZ-59405B...ea Futura. Exact reproduction. US made.... C5DZ ea C0DD-9047B C4DZ-9047C C4GY-9047 Fuel Filler Hoses Falcon except station wagon, sedan delivery and Ranchero. 5" long, molded... C0DD-9047B...ea Falcon sedan delivery; Falcon station wagon; Comet station wagon: Ranchero....C4DZ-9047C...ea Falcon; Comet except station wagon; 66 Ranchero. 4" long.... C4GY ea AK208 F199 Fuel Filler Hose Clamps and Gasket Clamps AK208...pr Gasket Made in the USA F199...ea Fuel Filler Tube Seal Upper An exact reproduction of the original rubber seal Falcon except station wagon....c6oz-9076a...ea Fuel Tanks NOTE: There is a $10.00 per order boxing fee for these items. Due to their size, additional shipping charges apply Falcon station wagon, sedan delivery and Ranchero. 14 gallon " " 6". Includes locking ring. For straps, see part #C0DZ-9092SS on the next page.... C1DZ-9002B...ea

41 ENGINE / FUEL / AIR CLEANER 90 C4DZ-9002A C4GY-9002A D0OZ-9002C C5DZ-9002D C6DZ-9002B AK151 Fuel Tanks Continued Falcon except station wagon, sedan delivery and Ranchero; Comet except station wagon. 14 gallon " " ".... C4DZ-9002A...ea Comet except station wagon. 20 gallon.... C4GY-9002A...ea Falcon station wagon and sedan delivery; Falcon station wagon; Ranchero. 20 gallon... D0OZ-9002C...ea Falcon except station wagon, sedan delivery and Ranchero. Will also fit if you want a larger tank, but you must use fuel sender #C8ZZ-9275C (see page 88) when installing it in gallon " " 6". Includes lock ring and o-ring. With drain hole... C5DZ-9002D...ea Falcon except station wagon and Ranchero. 16 gallon. 37" " ". Includes lock ring and o-ring.... C6DZ-9002B...ea Fuel Tank Screw Set 13 pieces AK151...set Fuel Lines These reproduction lines are pre-bent using an original car as a pattern. Add SS to part number for stainless steel. NOTE: These are custom-made special-order parts requiring 2 to 4 weeks for delivery. NOTE: There is a $10.00 per order boxing fee for larger lines, and additional shipping charges may apply. LGL6301 Fuel Tank to Pump NOTE: There is a $10.00 per order boxing fee for these items. Original Stainless cylinder hardtop and sedan ". 1 piece... LGL cylinder hardtop " line... LGL cylinder hardtop " line... LGL cylinder convertible " line... LGL cylinder convertible " line... LGL cylinder hardtop " line... LGL Ranchero 6-cylinder " line. 1 piece... LGL Ranchero 8-cylinder " line... LGL cylinder hardtop and sedan " line. 1 piece... LGL Fuel Pump to Carburetor cylinder... LPC C0DZ-9092SS C4DZ-9057A Fuel Tank Straps Stainless steel Falcon station wagon and Ranchero. Stainless steel... C0DZ-9092SS...pr Falcon station wagon and sedan delivery; Comet station wagon; and Ranchero. Steel gas tank straps painted black. Hardware not included. Black painted steel.... C4DZ-9057A...pr Fuel and Brake Line Clip Retains 5 16 " fuel line and 3 16 " brake line Requires 1 to 3 per vehicle s...ea Universal Fuel Line Hose and Clamp Kit Kit includes 36" of hose, 8 spring clamps and 8 keystone clamps. With 5 16 " fuel hose.... HHK kit C4AZ-9600AZ C5ZZ-9600W MRG1480 Hi-Po Style Air Cleaners and Elements Falcon Sprint. Will also work on most Ford and Mercury vehicles with single two-barrel or four-barrel carburetors. 14" diameter, " high, double hump. Chrome top, black bottom with correct filter (yellow element, round hole screen and orange gasket). Reproduction.... C4AZ-9600AZ...ea , 289, " diameter single hump. Correct chrome lid and blue base with rounded edge, correct color Hi-Po type 14" air filter and correct wing nut. Exact reproduction.... C5ZZ-9600W...ea Aftermarket.... MRG ea ORDER TOLL FREE

42 C4DZ-9600W Hi-Po Style Air Cleaners and Elements Continued , 200, 250. Features a performance-type replacement filter and a custom base designed to fit stock Autolite and Motorcraft carburetors.... C4DZ-9600W...ea Cobra-Style Air Cleaner and Element Features raised-lettering COBRA on a polished chrome lid. The 14" assembly includes the lid, correct orange air filter element, painted blue base with 5" mounting hole and 1 4 " 20 stud. The lid also features dimpled recess for wing nut and rounded edge.... S1MS-9600COBRA...ea B7SZ-9601A MRG1480A Filters Only for Air Cleaners Above Exact reproduction. 14".... B7SZ-9601A...ea Aftermarket.... MRG1480A...ea Chrome Air Cleaners Universal /B or 2/B Chrome-plated top and steel base " diameter. Includes filter, adapter and hardware kit. For vehicles with " or " diameter neck. Low riser 2" high ea High riser " high ea A 1485A Replacement Filters for Air Cleaners Above For cleaner # A...ea For cleaner # A...ea C3AZ- 9600BRKT 91 Air Cleaner Adapter Allows you to use an air cleaner with a " diameter neck with a carburetor that has a " diameter neck. No more fit problems when changing carburetors. Made of high-impact, heat-resistant plastic for durability.... MRG ea C3AZ-9600P4 Oval Single 4/B Air Cleaner Assembly Assembly includes top, oval filter, bottom, and all necessary hardware for installation. Ribbed top does not have cut-out for emblem. Cast aluminum as original. For cars but will fit other cars with a single 4/B carburetor. With single 4/B carburetor.... C3AZ-9600P4...ea Oval Air Cleaner Mounting Bracket Kit This kit will mount 1 oval air cleaner to a single 4/B carburetor. Kit includes bracket, two 1 4 " " shoulder bolts, one 1 4 " 20 2" bolt, two wing nuts, and instructions. NOTE: Air cleaner assembly #C3AZ-9600P4 already contains this kit. If you are ordering the assembly, you do not need to order this kit as well.... C3AZ-9600BRKT...kit Oval Single 4/B Air Cleaner Assembly Similar to that used on Shelbys, Cobras and other high performance Fords of the 1960s. Assembly includes aluminum top painted black with sanded edges and lines, single-carburetor bottom plate, air filter, mounting stud, wing nut, and carburetor spacer collar (trimming may be required) " L 10" W " H. NOTE: Please measure for clearance to fit your application. With single 4/B carburetor.... S1MS-9600P...ea Air Cleaner Filter Replacement Increases horsepower and fuel economy by up to 16% over other filters. Reusable just clean and reoil. You need never buy another filter. Round, 14" diameter, 3" tall. Made of cotton fiber. Blue ea ENGINE / AIR CLEANER KY /B Classic design with chrome-plated top. Includes filter, gasket, hardware, and PCV adapter. For vehicles with " or " diameter neck....ky ea Replacement Filter for Above Air Cleaner 10" 2" ea Air Cleaner Mounting Gasket ; ; ; ; ea Air Cleaner Lid Gasket Falcon 6-cylinder; Comet 6-cylinder....C3AZ-9673A...ea

43 ENGINE / AIR CLEANER / VALVE COVER 92 Air Cleaner Thumbscrews and Wing Nuts AK S8 Thumbscrews AK241...ea To snorkel S8...pr Wing Nuts S8 Replacement Fits almost everything except some 6-cylinder engines. Has the same locking notch as OEM. Show car quality S8...ea M9697A Aftermarket Tri-Corner Triple-chrome plated. Classic 3-corner design with black wrinkle finish in the center. Will fit any 1 4 " 20 threaded studs. Small ea Large ea Aftermarket Ford Oval Chrome with chrome script on dark blue background. Will fit any 1 4 " 20 threaded studs.... M9697A...ea B358871A B358871B Air Cleaner Knobs Billet. Fits air cleaner assembly stud size 1 4 " 20. With Toothed Grips Hole not drilled and tapped all the way through.... B358871A...ea Hole drilled and tapped all the way through.... B358871B...ea With Rubber Grips 1" diameter ea " diameter ea Can t find the parts you re looking for? TRY SEARCHING OUR WEB SITE! New parts are added every week! Typical Thermal ZCH6502 Choke Tube Thermal Choke Tubes Add SS to the end of the part number for stainless steel. Original Stainless Includes 1 tube, insulator, and compression fitting.... ZCH Includes 1 tube and insulator.... LCH Includes 1 tube, insulation sleeve, and compression nut.... ZCH Valve Covers Steel 6-Cylinder Chrome , 200, C3DZ-6582CH...ea C6ZZ-6582AB C6AZ-6582PR 8-Cylinder , 289, 289 Special, all before 5/5/66. Chrome.... C6ZZ-6582AB...pr Blue with oil filler tube in RH cover. Exact reproduction.... C6AZ-6582PR...pr C8OZ-6A582BL C8OZ-6A582C Power by Ford Covers Features Power by Ford stamped on the covers Dark blue... C8OZ-6A582BL...pr Chrome... C8OZ-6A582C...pr VC352/428CPH TD9297 Chrome Aftermarket , 289, 302, 351W. With baffles. OEM height. Hardware and gaskets not included pr Comet / Cyclone 427 with oil fill in valve cover and PCV hole.... VC352/428CPH...pr With baffles... TD pr ORDER TOLL FREE

44 Valve Covers Aluminum Cal Custom Covers Polished aluminum Cal Custom finned. Does not include oil cap, oil cap grommet or PCV grommet. See part #M6892F on page 94 for grommet kit , 289, 302, 351W.... C5ZZ-6A582AF...pr A G Polished Aluminum Aftermarket , 302, 351W " tall. Plain, smooth top with 2 oil fill / PCV knockouts in each cover and 1 screw-on baffle for each cover. For gaskets, see part #VS13264T in next column. For PCV grommet kit, see part #M6892F on page A pr , 289, 302, 351W. Tall. Polished to a high luster and features an extended lip to secure the gasket and baffle. For gasket set, see part #5870 in next column G...pr Ford Racing Black crinkle finish with red trim and Ford Racing logo. Requires grommet kit #M6892F on page , M6582L302...pr A A P Small-Block Powered by Ford Ribbed tops with logos. NOTE: These will not work on E.F.I. vehicles. 289 Powered by Ford. Black with brushed ribs and logo.... 6A pr Polished... 6A P...pr Powered by Ford. Black with brushed ribs and logo.... 6A pr Polished... 6A P...pr A A582-F Valve Cover Gaskets VS12692R Rubber , 200, 250. Fits valve cover #C3DZ-6582CH.... VS12692R...ea , 289, pr Rubberized Cork , 200, 250. Fits valve cover #C3DZ-6582CH (page 92) ea pr Ultra-Steel Rubber-Steel Made from high-density cork and rubber material with a steel core. The steel core prevents drawing or pushing of the gasket inside or outside the engine at high RPMs. Non-shrinking and non-sticking gasket made for excellent sealing and durability (can be reused). Gasket s thickness provides for additional clearance between valve train and valve cover , 289, pr PermaDry Plus Premium PermaDry Plus molded gaskets. Top quality , 289, 302, 351W.... VS13264T...set AK1029 AK1039 Valve Cover Mounting Kits Kits contain stainless steel hex head bolts and stainless steel lock washers. For Steel Valve Covers 260, 289, 302, 351W. Contains (12) 1 4 " 5 8 " bolts with 3 8 " washer heads and (12) 1 4 " internal tooth washers.... AK kit For Aluminum Valve Covers 260, 289, 302, 351W. Contains (12) 1 4 " 3 4 " bolts with 3 8 " washer heads and (12) 1 4 " internal tooth washers.... AK kit ENGINE / VALVE COVER 6A582-CT 6A582-R Small-Block Powered by Ford Continued 351 Powered by Ford. Black with brushed ribs and logo.... 6A pr Polished... 6A P...pr Falcon Powered by Ford.... 6A582-F...pr Comet Powered by Ford. Black with brushed ribs and logo.... 6A582-CT...pr Ranchero Powered by Ford.... 6A582-R...pr Valve Cover Bolt Kit For fast removal of valve covers. Chrome ends feature Ford oval logo. Amount required varies with vehicle. Kit of 4. Fits all chrome V8 valve covers.... M6680A302...kit

45 94 ENGINE / VALVE COVER C6AZ-6A664P C6AZ-6A664N C8AZ-6767B PCV Hoses Attaches oil filler cap to air cleaner " long... C6AZ-6A664P...ea Special 4/B after 5/2/66; after 5/2/66; /B or 4/B. Attaches PCV valve to carburetor. Stamped with Ford logo and part number. 12" long.... C6AZ-6A664N...ea PCV Elbow with 289; with 302, 302 Special; with 351C... C8AZ-6767B...ea EV68C V158 EV50 PCV Valves Replacement cylinder... EV68C...ea cylinder... V158...ea cylinder... EV50...ea Engine Gasket Sets A typical kit includes such items as head gaskets, intake manifold gaskets, exhaust header gaskets and intake manifold end seals; timing cover, water outlet, oil pan, water pump to plate and oil pump inlet tube gasket; fuel pump mounting, timing cover seal, valve cover water pump plate to block gaskets; oil pump to block, oil pan front and rear seals; rear main bearing seals; distributor mounting; oil pan drain plug; crankcase vent tube; and water pump cover gaskets , CS...set , 260, 289, set , 289, FS set CS...set C CS...set Motor Mounts E7AZ-6A892A D0OZ-6A892B C6AZ-6A892 C7AZ-6A892B C8AZ-6A892D C8AZ-6A892 PCV Grommets Give year and engine size when ordering ; , 170, 200; before 5/2/ E7AZ-6A892A...ea , 289 Special after 5/2/66 with EM/RE; /B or 4/B... D0OZ-6A892B...ea cylinder with D-shaped hole in valve cover.... C6AZ-6A892...ea cylinder. Twist-in.... C7AZ-6A892B...ea , 302 Genuine Ford... C8AZ-6A892D...ea or 8-cylinder with oil filler cap that accepts elbow.... C8AZ-6A892...ea E7AZ-6A892A...ea PVC and Oil Cap Grommet Kit Use with aftermarket valve covers on page Small-block or big-block.... M6892F...kit Motor Mounts 6-cylinder Before 7/4/62. LH or RH ea Falcon after 7/4/62; Falcon 200 except convertible; Comet 170 after 5/7/62; Comet 200 except convertible. LH ea RH ea LH or RH ea Motor Mounts V Falcon except convertible Comet 260 except convertible; Comet 289 except convertible. LH ea RH ea Front, LH or RH ea ORDER TOLL FREE

46 Motor Mounts V8 Polyurethane Replacement for the original ear type mounts. Improved durability. Requires a minor modification that is covered in the instruction sheet. Please read the instructions carefully before installation ; Front, LH and RH. Red bushings pr Black bushings BL...pr Motor and Transmission Mount Set Replacement set with polyurethane components. Set includes (2) motor mounts, (1) transmission mount, hardware for the transmission mount and instructions Falcon 289, 302; 66 Ranchero G...set C3DZ C3DZ C Frame Mounts Falcon / Comet 260, 289; 65 Falcon 289; 65 Comet C3DZ pr Intermediate Engine Mounts V8.... C3DZ C...pr Engine Swap Installation Kit Frame mounts and insulators , 427, KIT390...kit MCB10 C3DZ- 16A052AR Monte Carlo Bar MCB10...ea Export Brace C3DZ-16A052AR...ea Exhaust Mufflers Universal Inlet is offset; outlet is centered Pipes: 2.25".... FX ea Pipes: 2.50".... FX ea Headers Note to California Customers: California vehicle code Sections and prohibit advertising, offering for sale, or installation of any device which modifies a vehicle s emission control system, unless exempted. The headers in this catalog have not received an exemption from these code sections and are not legal for sale or use in California on vehicles originally equipped with catalytic converters. It is illegal, except for racing vehicles which may never be driven upon a highway, to remove or otherwise render inoperative any emission control device on regulated motor vehicles. Hedman Headers Built using the finest material and manufacturing procedures. Lifetime guarantee to the original purchaser against defects in workmanship and materials (part must be accompanied by the original sales invoice). Made in the U.S.A. NOTE: All Hedman headers are for vehicles without smog injection or injection heads. For vehicles without A.I.R. systems, considered as OEM replacement parts when existing controls are not removed from the vehicle. NOTE: Due to size, additional shipping charges apply. Available in three styles: Painted Headers Features a painted finish and 16 gauge tubing. 95 HTC Headers Features a high-temp coating with thermal protection up to 1,300º and a polished finish, all on 16 gauge tubing. The polished finish is more durable than chrome and wont turn blue like chrome. Elite Headers Built specifically for extremely hard use conditions. Features extra thick 3 8 " flanges and heavy wall 14 gauge primary tubes. They also come with a high-temp coating with thermal protection up to 1,300º for long life. Great for off-road condition and high-heat situations. ENGINE / EXHAUST 51A P 51A A 51A B Exhaust Deflectors Stainless steel. Made in the USA Plain... 51A-18529P...ea Ford Logo... 51A-18529A...ea V A-18529B...ea Exhaust Tip Heavy gauge, mirror-polished, 304 stainless steel with a rolled edge. Fits a " " inlet. Features a 3" round slant and a 7" length ea Shorty Street Headers The compact design of these headers make them perfect for low-tothe-ground cars and tight quarters " primary tube, " collector / 289 / 302 with A/T floor shift only, A/C, P/S. Painted set HTC set Elite set

47 ENGINE / EXHAUST Full Length Headers " tube, 3" collector / 289 / 302 with M/T or C4 A/T all floor shift only, A/C. P/S applications require drop-off bracket #88303 (see below). Painted set HTC set Elite set Small-Block Locking Header Bolts Double hex heads. 3 8 " bolts per kit " long kit " long A...kit Exhaust Manifold / Header Gasket Set Can be used for exhaust manifold or header gaskets. Port size: 1.12" 1.48". Set of pr Exhaust Manifold Gasket Sets Made of graphite facing mechanically bonded to perforated metal most suitable for sealing hot exhaust gases , 289, pr , 200, ea Tork-Step Headers Dyno tests prove that a strategically positioned change in the primary tube broadens your engine s overall torque curve. Experience a solid increase in low RPM towing and pulling power, increased RPM recovery rates upon gear shifts, and more power during downshifts for passing. All these gains with no loss of torque during the mid-rpm range. These headers work equally well on street-strip applications ", " tube, 3" collector / 289 / 302 with M/T or C4 A/T all floor shift only, A/C. P/S applications require drop-off bracket #88303 (see below). Painted set HTC set Before After Exhaust Port Divider by Clifford Research This cast-iron port divider is designed to correct the flow of No. 3 and 4 exhaust port to equal that of the other cylinders. By doing so, each cylinder produces an equal amount of power at all RPM points, thus an increase of as much as 10% can be gained. This part should be bonded into place with high-temp epoxy or tack welded into port , 170, 200; ea C2GZ-9430A D660YA Doug s Headers Ceramic coated. Tri-Y design. Tube size: " 2". Collector size: " Includes hardware, gaskets and instructions Falcon / Ranchero 260 / 289 / 302 with C4 transmission and floor or column shift, A/C and P/S.... D660YA...set Power Steering Drop-off Bracket This part is necessary to install the headers on vehicles with power steering ea D3BZ-9430A/B C3OZ-9430 Exhaust Manifolds 6-cylinder , 170. Flat surface.... C2GZ-9430A...ea / 170 / 200 without IMCO. Concave surface.... C3OZ ea except IMCO. Without hole for emissions. Heavy duty, less likely to crack.... D3BZ-9430B...ea ORDER TOLL FREE

48 Exhaust Manifolds continued 8-cylinder , C3AZ pr C0DE-554 C3OE-556 C2OE-555 RLK2 RLK5 Exhaust Manifold Bolt Kits Manufactured in the USA to OEM specifications. Reintroduces Ford s Ramp-Lok exhaust manifold bolt. This bolt was original equipment on all Ford engines beginning in , 200. F on the head.... C0DE kit , 289. F on the head.... C2OE kit high performance. F on the head.... C3OE kit , RLK1...kit RLK3...kit high performance.... RLK4...kit , RLK2...kit , RLK5...kit Exhaust Manifold Bolt Locks Small-block. Set of C2OZ-9A447A...set Manifold-to-Muffler Inlet Pipe Gaskets cylinder ea cylinder ea Exhaust Manifold-to- Heat Riser Stud Mounts to RH exhaust manifold. Attaches the heat riser to the manifold , S...ea SK1 SK2 Exhaust Manifold Stud and Nut Kits Attaches pipe to exhaust manifold cylinder... SK1...kit , 289; Hi-Po; , 302; SK2...kit Typical Engine Hardware Kit 97 Complete OEM Engine Hardware Kits Exact original equipment fasteners. Manufactured in the USA. All fasteners are of the correct grade and finish as specified by Ford engineers. All original manufacturer markings and design details. Kits contain fasteners for air cleaner, carburetor, crank pulley, distributor, engine tag, exhaust manifolds, fuel pump, heat shroud, ignition coil, intake manifold, oil filter adapter, oil pan, timing cover, valve covers, water neck and water pump. 170, C0DE kit C6DE kit C8DE kit , 289 with Generator Without A/C.... C2OE kit With A/C.... C2OE kit with Alternator 65 With cast-iron water pump and exhaust locks.... C5OE kit With aluminum water pump. Without A/C.... C5OE kit With A/C.... C5OE kit With cast-iron water pump. With A/C... C6OE kit Without A/C... C6OE kit With A/C... C7OE kit Hi-Po With generator.... C3OE kit With alternator and aluminum water pump.... C5OE kit With cast-iron water pump.... C6OE kit , Without A/C... C8OE kit With A/C... C8OE kit Without A/C... C9OE kit With A/C... C9OE kit C9DE kit ENGINE / EXHAUST

49 ENGINE / WIRING / ELECTRICAL 98 Wiring / Electrical NOTE: Electrical parts are nonreturnable once installed. We will replace defective units only. NOTE: We have a limited number of N.O.S. switches available that are not listed in our catalogs. Please call if you do not find listed the switch you need. Flame-Thrower Billet Distributors These plug-and-play distributors allow you to upgrade your outdated points or stock electronic distributor with a performance-proven distributor that features the patented Ignitor II electronic ignition module and a CNC machined 6061 T-6 polished billet housing and deck. PerTronix electronics are also compatible with any inductive ignition system coil, but high RPM performance D can be improved when used with a low resistance (0.6 ohm) Flame-Thrower II coil. If you re using a multi-spark CD ignition box, no problem the Flame-Thrower billet distributor is compatible. Additional features include a tempered.500" diameter shaft with low torsion displacement; an upper roller bearing and lower self-lubricating oil-impregnated copper powder metal bushing and a durable machined heat-treated gear. Distributors come with a factory set performance curve, a mechanical advance limiting adjustment. Black cap. 260, 289, D ea W.... D ea C, 351M, 400, 429, D ea FE (352, 360, 390, 427, 428).... D ea Replacement Cap for the Above Black.... D ea Replacement Rotor for the Above Black.... D ea D1350 D1352 Flame-Thrower HEI Distributors Performs misfire-free up to 7,500 RPM, nearly 3,000 RPM higher than the original factory HEI. Finally, a coil and module engineered to work together. Limited 1-year manufacturer s warranty. 260, 289, 302. Black cap.... D ea Blue cap.... D ea D4050 Replacement Caps for the Above Black.... D ea Blue.... D ea Ignitor Electronic Ignition Systems Upgrade to an electronic ignition and never change points again! Ignitors are an improvement over points because their integrated circuit design eliminates any moving parts that can wear out and delivers stable timing which eliminates the need for adjustment. Epoxy molding make these units impervious to dirt, oil, grease, and moisture. Fits entirely within the distributor no black box to clutter the engine compartment! Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy and spark plug life. Temperature range: -50º to 300º F. RPM range: 0 to 15,000 RPMs Legal in all 50 states and Canada. 30-month manufacturer s warranty against defects Ignitor I Improvement over points in current fall time for increased coil output. Features rotating cobalt magnets which trigger a Hall Effect integrated circuit. Will trigger most multi-spark CD ignitions. Available for 6- and 12-volt negative and positive ground systems. Use with Flame-Thrower 40,000-volt coil for optimal performance. 6-cylinder Except V6. With single-point Motorcraft distributor ea Except V6. With single-point Holley distributor ea V ea With dual-point distributor. Without vacuum advance D...ea With vacuum advance DV...ea Ignitor II Has many of the same great features of the Ignitor I, but it s smarter. It senses the coil current levels and uses a powerful microcontroller to control dwell period for the best possible spark over the entire RPM range, reducing misfires and improving engine performance. Develops up to 4 times more energy between 3,000 and 5,000 RPMs than standard ignition systems. Peak current level is reached just prior to spark for maximum Typical Unit energy without the heat buildup, increasing coil and module life. Adjusts spark timing at higher RPMs to compensate for the inherent electronic delay. Senses startup and develops more energy for quicker, easier starting. Built-in reverse polarity and over-current protection shuts down the system, preventing component damage. Use with Flame-Thrower II 45,000-volt coil for optimal performance. 6-cylinder cylinder except V6. With single-point Motorcraft distributor ea cylinder except V6. With single-point Holley distributor ea V With single-point distributor ea With dual-point distributor. Without vacuum advance D...ea With vacuum advance DV...ea ORDER TOLL FREE

50 Ignitor Electronic Ignition Systems Continued Ignitor III Upgrades your ignition even more by adding thermal-clad construction, integrated adjustable rev limiter with LED feedback and multi-spark ignition. Use with Flame-Thrower II 45,000-volt coil for optimal performance cylinder with single-point Motorcraft distributor ea Flame-Thrower Ignition Coils 90-day manufacturer s warranty. Flame-Thrower cylinder. 3.0 ohms resistance. Chrome ea Black ea cylinder. 1.5 ohms resistance. Chrome ea Black ea Flame-Thrower II or 8-cylinder. 0.6 ohms resistance. Chrome ea Black ea Flame-Thrower Spark Plug Wire Sets Features low 500 ohm-per-foot resistance; silicone jackets to resist high temperatures, moisture, oil and chemicals; EPDM rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks; fiberglass reinforcing braid for added strength and flexibility. Made in the USA. Lifetime manufacturer s warranty. 7.0 mm Stock-look Wires Comet 200; Falcon / Ranchero 6-cylinder.... SPW4...set Falcon all 8-cylinder; Comet 260, 289, SPW1...set mm HEI Wires For use with HEI distributors part #D1350 and #D1352 (see page 98). 221, 260, 289, SPW3...set Points Eliminator Kit By Accel Ends replacing points while improving performance and fuel efficiency. Uses special circuitry and an infrared signal that allows stable ignition timing from 1 to 10,000 RPM. The thermal cladbased surface mount allows for maximum dependability and long life. Can be installed with simple hand tools V8 with Motorcraft single-point distributor kit HA-12106A B7A-12106A B7AZ-12106A Distributor Caps 6-cylinder Plain black. Like original FoMoCo with aluminum contacts.... 7HA-12106A...ea V Black with brass contacts. No logo.... B7A-12106A...ea Autolite logo with aluminum contacts.... B7AZ-12106A...ea DG313A Distributor Cap and Rotor Kit Features both a blue distributor cap and a blue rotor. The cap has brass contacts. Reproduction part. V8... G kit Distributor Hold-Down Clamp Chrome. Includes installation bolt. V6, V8 except FE.... M12270A302...ea B6A Ignition Coils Black with brown top. Meets or exceeds OEM specifications. Heavy duty replacement, does not look like original.... DG313A...ea Yellow top. 2-year manufacturer s warranty.... B6A ea C4DZ-12043A C4DZ-12043S 99 Ignition Coil Brackets Falcon; Comet. All V8. Black.... C4DZ-12043A...ea Stainless steel.... C4DZ-12043S...ea Ignition Wire Set This ignition wire set has the best combination of capacitance, inductance and resistance to provide more spark energy and EMI protection. It will eliminate interference with on-board electronics and provide better sound quality for car audio systems. Set includes spark plug wires and ignition coil wire Falcon 8-cylinder; Comet 8-cylinder set ENGINE / WIRING / ELECTRICAL

51 100 ENGINE / WIRING / ELECTRICAL Boot Detail Spark Plug Wires Motorcraft 7 mm static-suppression wires made to original equipment specifications. Set includes 8 plug wires and coil wire , 289, 302;... C5OZ-12259BMC...set C3OZ-12259E C8AZ-12259B Spark Plug Wires Reproductions Exact reproduction; not Ford cylinder. Stamped with FoMoCo logo.... C3OZ-12259E...set V8. Stamped with FoMoCo logo.... C5ZZ-12259A...set with smog... C6OZ-12259B...set Without smog... C7OZ-12259A...set With smog... C7OZ-12259B...set , 302 with smog.... C8AZ-12259B...set cylinder. Stamped with Autolite logo.... C8ZZ-12259A...set V8 without smog. Stamped with Autolite logo.... C8ZZ-12259B...set Spark Plugs Falcon 289; Comet 289, 427. Autolite ea B8Q-12216A C0DZ-11A572A Distributor Lead B8Q-12216A...ea Ignition Harness Repair Falcon / Comet.... C0DZ-11A572A...ea C3DZ-14290A C4DZ-14290A Firewall-to-Headlamp Harnesses Early 6-cylinder without A/C.... C0DF-14290C...ea Late 6-cylinder; 8-cylinder.... C3DZ-14290A...ea Falcon 6- or 8-cylinder.... C4DZ-14290A...ea Comet 6- or 8-cylinder.... C4GY-14290A...ea or 8-cylinder... C5DZ-14290A...ea C4DZ-13076A B6A-12297A B8Q-12297A Spark Plug Wire Separators V8 (uses 2) and 6-cylinder (uses 1).... B6A-12297A...ea V8; cylinder. On valve cover.... B8Q-12297A...ea Headlamp Extension Leads C1DB-13076A...ea C4DZ-13076A...ea SETRD Separators Sets Made from ABS plastic. Includes 2 valve cover-mounted separators and 2 regular separators. Black SETBK...set Blue SETBU...set Red SETRD...set C0DF C4DZ Taillight Feeds 60 Sedan... C0DF ea door sedan and convertible.... C4DZ ea ORDER TOLL FREE

52 C3DZ-14289A C5DZ-14289B C7DZ A Firewall-to-Engine Gauge Feeds 63 6-cylinder... C3DZ-14289A...ea cylinder... C3DZ-14289B...ea cylinder... C4DZ-14289A...ea Falcon 8-cylinder... C4DZ-14289B...ea Comet 8-cylinder.... C4GY-14289B...ea cylinder... C5DZ-14289A...ea cylinder... C5DZ-14289B...ea cylinder... C7DZ-14289A...ea Neutral Safety Switch Wiring Harness Wiring harness only; does not include neutral safety switch NSSFA...ea Universal Chassis Wiring Harness Easy to install and features color-coded high temp TXL wire with each circuit s routing clearly printed the full length of each wire. Includes all the connectors, fuses, flashers, relays and wire ties you will need for installation. Includes easy-to-read and follow instructions. Uses blade type fuses. 14 circuit ea ENGINE / WIRING / ELECTRICAL C4DZ-14401B L Typical Falcon Front End Under-Dash Wiring Harnesses C0DF-14401C...ea With 1-speed wipers.... C4DZ-14401A...ea With 2-speed wipers.... C4DZ-14401B...ea Wire Harness Protector Grommet This vinyl-coated metal grommet protects the wiring harness wherever it passes through sheet metal. Fits into " hole L...ea SW667 SW1547B SW669 SW1311 C1SF-7A217A SW368 SW868A Neutral Safety Switches With or without back-up lamp. NOTE: If you don t have back-up lamps, don t use 2 of the wires on this switch.... C1SF-7A217A...ea or 8-cylinder C4 with column shift. Mounts to transmission.... SW368...ea With column shift, without vacuum brake release. Motorcraft... SW868A...ea Neutral Safety Switch Actuator This is the metal actuator that clips on the steering column under the neutral safety switch to activate the switch. Genuine Ford N.O.S. Limited availability Column shift.... SW868AXX...ea Oil Pressure Sending Units Falcon and Comet.... SW667...ea Comet with gauges (not warning lights).... SW1547B...ea Before 4/10/67 with warning lights (not gauges).... SW669...ea SW ea C2OZ-9B339A C2OZ-9B339CH Oil Pressure Sending Unit Extensions 65 Comet 289. Zinc.... C2OZ-9B339A...ea Chrome.... C2OZ-9B339CH...ea

53 102 ENGINE / WIRING / ELECTRICAL SWC482 SW663 Water Temperature Senders Falcon 6-cylinder before 9/1/65; Comet. 150º.... SWC482...ea Falcon 6-cylinder after 9/1/65; Falcon 8-cylinder.... SW663...ea B7A-13832A B7A-13832B 13832/3SET Horns Reproductions Fits most cars. Includes hardware to mount horn to bracket. Brackets sold separately (see part number C0DZ-13830PR below). High tone.... B7A-13832A...ea Low tone.... B7A-13832B...ea Fits most Ford and Mercury vehicles. Left and right assemblies (high and low tone) with mounting brackets and nuts /3SET...set Engine / Trunk Lamp Kit This dome-shaped cover is an exact copy of the original Ford kit and includes wire and bulb. For engine compartment and / or trunk C2RZ-15A700A...ea SW938 C0AZ-15520A LS249 Back-Up Lamp Switches Falcon with Ford-O-Matic; Falcon with M/T; Comet with M/T. NOTE: In order to facilitate installation, it may be necessary to ream the switch mounting hole in the existing back-up lamp switch mounting bracket to accommodate the switch diameter.... SW938...ea Falcon with Ford-O-Matic; Falcon with M/T; Comet with M/T. With pigtail.... C0AZ-15520A...ea M/T.... LS249...ea BH101HC BH101LC Replacements Universal fit, easy to install. Manufactured for 12 volt systems and features a 125 db sound level. Corrosion-resistant and includes mounting hardware. High tone... BH101HC...ea Low tone... BH101LC...ea Horn Mounting Brackets Reproductions made of stamped steel. Includes one LH and one RH. Hardware not included C0DZ-13830PR...pr Horn Relay 3 terminals. 12 volt, 30 amp HR127...ea A/C Compressor Switch and Bracket C8SZ-2979A...ea NOTE: We have marked with a those parts which also fit corresponding Mercury models, such as Comet and Caliente. C4DZ-14526C C4DZ-15A669 Convertible Top Wiring Power top terminal and circuit breaker.... C4DZ-14526C...ea Power top feed, under hood.... C4DZ-15A669...ea S Wiring Straps Wiring straps S...ea...70 Set of AK114B...set Wire loom strap " 3 8 " ea...95 Solderless Wire Terminal / Connection Kit An assortment of the 18 most popular solderless insulated terminals and connectors. Includes a plastic display box with dividers. 175 pieces. Includes 9" crimping tool.... TK50413A...kit ORDER TOLL FREE