Generated On: April 27, You can view our catalogs online at 113Chassis - Frame and Floors - Pg. 1

Transcription

1 Generated On: April 27, 2018 You can view our catalogs online at 113Chassis - Frame and Floors - Pg Bracket, Pedal Mounting Stud Mount Bracket, Exhaust, Weld to Frame (exhaust ring hangsfrom it) Crossmember, Rear R Crossmember, Rear, Reproduction Rail, Frame Side, Left R Rail: Reproduction Patch Panel, Front Wheelhousing, Rear Area. Same Each Side Rail, Frame Side, Right R Rail: Reproduction Floor, Trunk, Left R Floor, Trunk, Left: Reproduction Crossmember, Rear R Crossmember Reproduction Patch Panel, Left Patch Panel, Rear Rail End, Left Rail, Frame, Rear, Left P Patch Panel, Rear Rail, Left Patch Panel, Right Patch Panel, Rear Rail End, Right Rail Frame, Rear, Right P Patch Panel, Rear Rail, Right

2 Support, Rail, Right R Rail Reproduction Right Trunk Floor R Reproduction Right Trunk Floor - Minus Cup Brackets Support, Trunk Floor and Fuel Tank R Reproduction Trunk Floor and Fuel Tank Support CALL Firewall, Left Firewall, Right Floor, Front, Left Floor, Front, Right Filler Panel, Left Filler Panel, Right Floor, Center Floor, Center Trailing Arm Support, Left Trailing Arm Support, Right Floor, Rear, Left Floor, Rear, Right Seat Support Crossmember, Left Seat Support Crossmember, Right R Reproduction Seat Support Crossmember, Left CALL R Reproduction Seat Support Crossmember, Right CALL Cup, E-Bracket Lever Support, Rail R Support Reproduction Cover, Sill For Top of Rail, Left Cover, Sill Cover For Top of Rail, Right R Reproduction Cover, Sill For Top of Rail, Left R Reproduction Cover, Sill For Top of Rail, Right Floor, Trunk

3 R Reproduction Trunk Floor Reinforcement, Extends Frame Under Floors Cover, Filler Neck Rocker Panels, Left Rocker Panels, Right R Reproduction Rocker Panels, Left R Reproduction Rocker Panels, Right Cover, Jack Hole Chassis - Body Panels - Pg Sealer, Between Wheelhousings CALL Battery Tray Seal, to Splash Shield Battery Hold Down, Top Reinforcement Strut, Top of Wheelhouse, Right Shield, Dirt Patch Panel, Front Frame Rail Nose Panel Frame, Battery Crossmember, Outer R Crossmember, Outer - Repro Pillar, Outer, Left Bucket, Headlamp, Left Baffle Plate, Left Crossmember, Firewall Pillar, Outer, Right Bucket, Headlamp, Right Right Baffle Plate, early

4 Right Baffle Plate, late CALL Pillar, Inner, Left CALL Pillar, Inner, Right CALL Fender, Front Original, Left Patch Panel, Fender, Rear, Left Mount, Shock, Left Fender, Front Original, Right Patch Panel, Fender, Rear, Right Mount, Shock, Right Reinforcement Nose Panel, Upper Reinforcement Strut, Top of Wheelhouse, Left Crossmember, Inner Wheelhouse, Front Fender Right Wheelhouse, Front Fender Left Connection Plate, Left Connection Plate, Right Pillar, Rear, Left Pillar, Rear, Right Tail Panel, Inner Fender, Rear, Original, Left Wheelhouse, Inner, Left Fender, Rear, Original, Right Wheelhouse, Outer, Left Wheelhouse, Outer, Right Quarter Panel Patch Full Length, Left Quarter Panel Patch Full Length, Right Patch Panel, Rear 1/4 Lower Rear, Left Patch Panel, Rear 1/4 Lower Rear, Right Patch Panel, Behind the wheel, Left Patch Panel, Behind the wheel, Right

5 Wheelhouse, Inner, Right Patch, Lower Tail Panel CALL Cowl Panel, Rear Tail Panel, Outer Tail Patch Panel, Outer Deck Lid, New Hood U Hood: Used Hinge, Hood Half, Left Hinge, Body Half, Left Hinge, Hood Half, Right Hinge, Body Half, Right Shield, Dirt Hood Rod Rod, Battery Hold Down Chassis - Fuel and Exhaust - Pg Cap, Gas, Locking, Chrome Filter, Fuel Bracket, Exhaust Hanger Kit, Exhaust Rear Bracket, Exhaust Hanger, Bottom Pump, Fuel Seal, Exhaust, Front Hose, to Tank Hanger, Exhaust Hanger Exhaust Ring, Rubber Hose, Fuel Line to Filter 20.25

6 Hose to Damper at Fuel Injection Pump Gas Pedal Gasket, Unit To Sending Unit, All Cap, Fuel Sending Clamp, Fuel Line Gasket, Plug - Sub to Plug, Fuel Tank Mount, Fuel Lines Hose, Fuel Pump Hose, Fuel Pump Hose, Tank to Hose, Fuel Inj 230SL Early Style up to Line, Fuel Pump to Filter Hose Line, Fuel Tank to Pump Tank, Fuel, 230SL Tank, Fuel, 280SL R Tank, Fuel, 280SL, Repro Exhaust System, Stainless, Late Exhaust System, Stainless, Early Pipe, Exhaust, W/Res R Pipe, Exhaust, W/Res.: Reproduction Bracket, Exhaust Hanger Top Pipe, Exhaust, Front, Up To # Pipe, Exhaust, Front, From # Muffler, Rear R Muffler, Rear: Reproduction Hanger Exhaust Ring, Rubber Bracket, Exhaust Hanger 10.78

7 Extension, Tailpipe Pipe, Rear Exhaust R Pipe, Rear Exhaust: Reproduction Seal, Gas Cap Tank, Vapor, 250SL and 280SL Bumper, Rear Muffler Mount, Rubber Boot Hose, Fuel Filter Cannister at Injection Pump (230SL) CALL Hose, Fuel Injector Return Hose, Fuel Filter Cannister at Injector Pump (250, 280SL) Chassis - Engine Upper - Pg Valve Cover Cap CALL Mixture Relay, 4 pole Mixture Relay, 5 pole Timing Chain Pin, Rail Guide (Small) CALL Guide, Exhaust Valve (129 and 130 Engine), Std Guide, Exhaust (129 and 130 Engine), 1st over (.1mm) Guide, Exhaust (129 and 130 Engine), 2nd over (.2mm) Guide, Exhaust (129 and 130 Engine), 3rd over (.3mm) CALL Guide, Exhaust (129 and 130 Engine), 4th over (.4mm) CALL Spring, Valve, Outer (230SL) Spring, Valve, Inner (250SL) Spring, Valve, 280SL upto / Camshaft (280SL after /007229) Rocker Arm 75.00

8 Valve, Exhaust (129 and 130 Engine) Guide, Timing Chain, Lower (Req 2) Guide, Timing Chain Gear, Camshaft Valve Seal Kit (280SL, 250SL after /000466) Gear, Driver Bushing Distributor, Water Cup Distributor, Water Cup (Req 6) Distributor, Water Cup (Req 3) Guide, Exhaust Valve ( Engine), mm Guide, Exhaust Valve ( Engine), 14.20mm Guide, Exhaust Valve ( Engine), 14.40mm Intermediate Gear Valve Seal Kit (230SL, 250SL up to /000466) Cylinder Head, 982 Engine CALL Lower Gasket Set, 230/250SL Upper Gasket Set, 230/250SL Upper Gasket Set, 280SL up to manual or auto Upper Gasket Set, 280SL after manual or auto Cylinder Head, 983 Engine (After ) CALL Cylinder Head, 983 Engine (Up to ) CALL Lower Gasket Set, 280SL Gasket, V Cover ( and ) Tensioner, Timing Chain CALL Guide, Intake Valve, Std Guide, Intake Valve, 1st over Guide, Intake Valve, 2nd over Guide, Intake Valve, 3rd over Pin, Ball/Rocker Arm (280SL) Spring, Valve, 280SL after / CALL

9 Valve, Intake (250SL/280SL) Gear, Tach Drive Pin, Ball/Rocker Arm Camshaft (280SL up to man or auto) Camshaft Gasket, Tensioner Valve, Intake (230SL) Spring, Valve, Inner Valve, Exhaust ( Engine) Gasket, Valve Cover Cap Gear, Crankshaft Intermediate Gear (Req 2) Pin, Chain Guide Chassis - Engine Lower - Pg Rings, 86.5mm CALL Rings, 87mm CALL Rings, 87.5mm CALL Seal, Rear Main (230SL) CALL Bolt to Cylinder Cover Washer, Bolt to Cylinder Cover Seal, Rear Main (280SL) Seal, Front Crank Gasket, Oil Plug CALL Oil Pan, Lower, 230SL up to /002044) CALL Oil Pan, Lower, 280SL up to CALL SL Main Bearings, Std SL Rod Bearings, Std

10 SL Main Bearings,.25mm over SL Rod Bearings,.25mm over SL Main Bearings,.50mm over SL Rod Bearings,.50mm over SL Main Bearings,.75mm over SL Rod Bearings,.75mm over SL Main Bearings, 1.00mm over SL Rod Bearings, 1.00mm over Spacer Sleave Counter Weight, 250SL CALL Nut, Connecting Rod, 280SL Screw, Connection Rod (250SL/280SL) Nut, Connecting Rod, (230SL after )/250SL CALL Bushing, Rod, 250SL Gasket, Cover SL Rod Bearings, Std SL Rod Bearings,.25mm over SL Rod Bearings,.50mm over SL Rod Bearings,.75mm over SL Rod Bearings, 1.00mm over Mount, Transmission Screw, Connecting Rod (230SL after /000110) Oil Pan, Lower, 230SL after /002044) Oil Pan, Lower, 280SL from SL Rod Bearings, Std SL Rod Bearings,.25mm over SL Rod Bearings,.50mm over SL Rod Bearings,.75mm over SL Rod Bearings, 1.00mm over Piston, 4 Ring, 24mm Wrist Pin (82mm) 230SL

11 Piston, 4 Ring, 24mm Wrist Pin (82.5mm) 230SL Piston, 4 Ring, 24mm Wrist Pin (83mm) 230SL Counter Weight, 230SL after / CALL Bushing, Rod, 230SL SL Main Bearings, Std SL Main Bearings,.25mm over SL Main Bearings,.50mm over SL Main Bearings,.75mm over SL Main Bearings, 1.00mm over Piston, 4 Ring, (86.50mm) 280SL Piston, 4 Ring, (87mm) 280SL Piston, 4 Ring, (87.50mm) 280SL Piston, 3 Ring, (86.50mm) 280SL Piston, 3 Ring, (87mm) 280SL CALL Piston, 3 Ring, (87.50mm) 280SL Bushing, Rod, 280SL Screw Plug Cover, Cylinder SL Main Bearings, Std SL Main Bearings,.25mm over SL Main Bearings,.50mm over SL Main Bearings,.75mm over Piston, 3 Ring, 25mm Wrist Pin (83mm) 230SL CALL Piston, 3 Ring, 25mm Wrist Pin (82.5mm) 230SL CALL Piston, 3 Ring, 25mm Wrist Pin (82mm) 230SL CALL Counter Weight, 230SL up to / CALL Gear, Flywheel Ring Mount, Motor Nut, Connecting Rod, (230SL up to ) Screw, Connecting Rod (230SL up to /000110) CALL

12 Gasket, Oil Pan (230SL, 250SL up to /001025) Gasket, Oil Pan (Late 250SL, 280SL) Chassis - Heating and Cooling - Pg Washer (requires 4) Cap, Pressure Radiator or Tank Lever, Heater, Green Lever, Heater, Red Lever, Heater, Blue Heater Blower Motor O-ring, Water Lever, Heater, Red CALL Lever, Heater, Blue CALL Casing, Outer Cable For Heater 400mm (Requires 4) Clutch, Fan SL Fan and Alternator 930mm Belt SL Fan and Alternator 875mm Belt SL Fan and Alternator 910mm Belt Power Steering Belt, All SL Fan and Alternator 900mm Belt O-ring, Water Valve Hose, Return, 250SL and 280SL. Up to Chassis # Hose, Heater Thermostat - 79deg Cent Thermostat, 87d Cent Water Pump 280SL (long 4 in) Water Pump, 250SL and 280SL (short 2 in, early) Water Pump, 250SL and 280SL (short 2 in, early)

13 Gasket, Water Pump Blower Switch Knob R Plug, Heater Access Blower Motor Switch Hose, Return Line 230SL, Different Sized Upper Hose Hose, Radiator, Lower, Up To # Hose, Radiator, Lower, From # Hose, Tank Outlet: SL - Curved. 230SL - Straight 18mm Hose Hose, Radiator, Lower, 250SL and 280SL Spacer, Radiator Mount, Rubber Defroster Duct, Left Defroster Duct, Right Air Intake Flap, Left Air Intake Flap, Right CALL Flap Seal, Left Flap Seal, Right Heater Hose, 230SL (1M), 250SL, and 280SL (1.5M) To Chassis # Heater Hose, 280SL from Chassis # CALL Seal, Fresh Air Vent Lever, Fresh Air (Requires 2) Wire, 485mm Long For Heater (Requires 4) Grommet, Core Return Line. (Also in Grommet Kit) Grommet, Core Feed Line. (Also in Grommet Kit) Water Pump, 230SL (short 2 in, early) Hose, Therm. Hsg. Bottom, 230SL Hose, Therm. Hsg. Bottom, SL Water Line Tube Gasket, Therm Hsg. To Head 2.08

14 Gasket, Water Pump to Block Gasket, Housing CALL Hose, Rad Overflow Bolt, Hollow (Requires 2) Chassis - Suspension, Front and Springs - Pg Boot Kit Ball Joint, Left Hand Thread Ball Joint, Right Hand Thread Steering Shock Bearing, Inner Bearing, Outer Seal, Front Tie Rod Assembly Mount, Rear Spring (30mm) Mount, Rear Spring (24mm) Mount, Rear Spring (18mm) Mount Kit Bolt Kit Mount, From # Mount, Lower Retainer Mount, Comp. Spring Repair Kit, Control Arm, Upper, Outer Repair Kit, Control Arm, Lower, Outer Drag Link Repair Kit, Control Arm, Upper, Inner Repair Kit, Control Arm, Lower, Inner

15 Mount, Top Repair Kit Rod, Support Control Arm, Lower, Left Control Arm, Lower, Right Spindle, Left Spindle, Right Bumper, Lower Control Arm Bushing, Control Arm Bushing, Control Arm Plate, Seal Puller Repair Kit, Idler Arm, 230SL Arm, Idler Seal, Idler Arm Repair Kit, King Pin Control Arm Upper Bumper, Upper Hub, Front Shocks, Bilstein Gas, Front Shocks, Bilstein Gas, Rear Spring, Front Shocks, Monroe Gas, Front Mount, Up to # Spring, Rear Shocks, Monroe Gas, Rear Spring, Compensating Washer Bushing, Control Arm Bushing, Control Arm Nut 54.45

16 Bolt, Lock Nut Repair Kit, Idler Arm, 450SL Chassis - Clutch, Trans, Linkage - Pg Clutch Pressure Plate, New, SL Bearing Release with hub, 280SL Only Hose Clutch Slave Cylinder Hose, 230SL Cylinder, Clutch Slave, 230SL-250SL Clutch Release With Sleeze (280SL) Clutch Pressure Plate, New (230SL) Cylinder, Clutch Slave, 280SL Switch, Reverse Lights Repair Kit, Cylinder - 280SL Clutch Release Without Sleave (250SL) Clutch Pressure Plate, New, (250SL, 280SL) Switch, Backup Bearing, Countershaft, Front and Rear Hex Shift Rod At Trans Bearing, Main Shaft, Front and Rear Clutch Plate, New Clutch Bearing with Sleave SL Clutch Release With Sleave (230SL, 250SL) Clutch Release Without Sleeve (230SL) $ Bolt, Shift Rod At Trans Bushing, Rod At Trans. (Requires 2) Bushing, Shift Lever Boot, Shift 113 WST 16.35

17 Boot, Bottom, Up to Chassis # SL Only Boot, Bottom, From Chassis # and 250SL, 280SL Knob, Ivory Knob, Shift-Push On, Black Screw, Hex Head, Shift Rod at Trans Bushing, Shift Support Lever, 230SL Only Bushing, Shift Support Lever, All others (Requires 2) Bushing - Support Rod, 2 Required, All others Spring, Clutch Release Bushing, Auto Shift CALL Bushing, Auto Shift CALL Bushing at End of Rod Shift Gate, All 113 WAT Cable, Shift Rod, Shifter Support, 2 Required, From # Ring, Trans Synchro Shift Knob Black B Shift Knob Black Boot Cable, Speedometer, Standard Cable, Tachometer Cable, Speedometer, Automatic Gasket and Seal Set, 230SL and 250SL Gasket and Seal Set, 280SL Boot, Clutch T/O Lever Lock, Rear Nut Nut, Rear Bushing, Lever Bottom (Requires 4) 8.00

18 113Chassis - Brake Parts FIG #1 - Pg Retainer, Hose Hose, 230SL, Left Hose, Right, Rear Distributor, Front or Rear Booster Regulator, Brake Screen Reservoir, 230SL Cap, Reservoir Gasket Gasket Master Cylinder, 230SL Master Cylinder, 250SL and 280SL Early Reservoir, To Master Cylinder CALL Master Cylinder, 280SL Late O-ring, Cylinder to Booster Boot, Cable Lever Lock Plate, Hose to Line Cable, Front Left Rear Cable Right Rear Cable Right Rear Cable, 230SL (Must use adaptor ) Left Rear Cable, 230SL (Must use adaptor ) Nut, Adjustment Adaptor to 230SL Rear Brake Cable Line, Left, Front Line, Cylinder to Distributor 20.00

19 Line, Right, Rear Line, Center Line, Right, Front Line, Center, All Hose, Left and Right, Front, All Boot Spring Clip, Cable, Retainer Chassis - Brake Parts FIG #2 - Pg Bleeder Screw Bleeder Screw Caliper, Rear 250 and 280SL, Left Caliper, Rear 250 and 280 SL, Right Bleeder Screw Cap Cap, Protective Spring, Up to Chassis # Spring, Up to Chassis # Pin Set, Pad Mounting Pin Set, Front Disc Pad Mount Pad Set (Textar): 250 and 280SL Rear Disc Brakes Pad Set, Front Caliper, Front All, Left Caliper, Front All, Right Cylinder, Rear Line, To Calipers 250 and 280SL, Left Line, To Calipers 250 and 280SL, Right Lock Plate, Rear Disc Brakes 50.85

20 Spring, From Chassis # Spring, Return, 250 and 280SL - Sub To Spring, From Chassis # Bolt, Lug. Wheel Attaching, Disc Or Drum Brakes CALL Case, Cable Pulley Lever, Emergency Brace, Actuating, Left Shoe Set (4 Pieces) Disc, Front, 230SL Washer, Cupped Washer, Flat Back Plate Spring Spring, Shoe Return (230SL) Spring, Return CALL Line, To Calipers 230SL, Left Line, To Calipers 230SL, Right Drum, Rear, 230SL Adaptor to be used with Pulley Disc, Front, 250 and 280SL Lock Plate, Rear Disc Brakes Lock Plate, Front Sleeve, Adjuster Washer Washer Washer Spring Screw, Shoe Adjuster Shoe, Emergency Brake. Uses Disc, Rear, 250 and 280SL Spring, Return Pin 19.64

21 Washer Pad Set (Ate): 250 and 280SL Rear Disc Brakes Chassis - Rear Axle Assembly - Pg Outer Bearing CALL Inner Bearing Bearing, Axle, Left Seal, Axle, Inner Seal, Axle, Outer Bearing, Rear Case CALL Staple Bearing, Drive Shaft Seal Ring Flex Joint Kit Yoke, Centering Cross Bumper, Rear Axle Mount, Axle to Body Bushing, Axle Pivot Mount, Arm to Frame Bumper, Rear Axle Rear Axle Boot, Split Rear Axle Boot, Solid Clamp Kit With Staples Gasket, Backing Plate Repair Kit, Axle (2). Includes All 6 pieces Above Grooved Nut Mount, Rod Mount, Rod To Axle, Rubber 33.90

22 Lock, Arm to Axle Mount, Rear Axle, Rubber, Takes 4 CALL U-Joint, Drive Shaft Yoke, Centering Cross Lock Boot, Axle to Side at Diff Nut, Axle Bearing Pin, Tappers Bushing, Axle Pivot O-ring Seal Flex Joint Lock, Axle Pin Bolt Bolt, Axle Support Washer, Lock Chassis - Tuneup Parts - Pg Clamp, Air Cleaner Seal, Early 230SL Seal, Air Cleaner Halves Air Filter, Late SL Condenser, Aluminum Condenser Points Set, Distributor #Zvkt Rotor Points, 2 Piece, Distributor # Cap, Alignment Knotch In Cap, Cast Iron Distributor Rotor, Distributor (230SL) Points, Transistorised Ignition, 280SL 17.50

23 Coil, with Transistor Ignition (Blue) Cap, Distributor, Aluminum Style Distributor Points, Aluminum Distributor Distributor Cap Coil, no Transistor Ignition (Red) Filter, Oil, All Seal, Oil Filter, Bottom Seal, Oil Filter Seal, Oil Filter, Upper Filter, Fuel All 113 CALL Mixture Relay (4 Pole) Mixture Relay (5 Pole) Wiper Relay Grommet, Ignition Wires, 230SL Condenser, late 280SL (non-aluminum) Switch, Cold Start Voltage Regulator Wire Set, Ignition 230SL Boot Breather Off Cylinder Head Cover Buffer, Mount, Rear Muffler Hose, Air Cleaner, 230SL (230mm) Hose, Air Cleaner, 250SL (205mm) CALL Hose, Air Cleaner, 250SL (100mm) Hose, Air Cleaner, 280SL (140mm) Wire Set, Ignition SL Hose, Air Cleaner, 230SL (162mm) Bracket, Condenser Clip, Distributor Cap W7-DC Spark Plug, Standard 4.95 WR-7DP Spark Plug, Platinum 2.22

24 Points Click to select your distributor number for ordering CALL Condenser Click to select your distributor number for ordering CALL Distributor Cap Click to select your distributor number for ordering CALL Rotor Click to select your distributor number for ordering CALL 113Chassis - Body Chrome and Emblems - Pg Clip Kit - 24 Set CALL Plug, Moulding Clip Seal, Guards, Bumper Insert, Rubber, Top Mouldings Clip, Side Moulding Clip, Moulding Mirror, 230SL, Left Mirror, 230SL, Right Handle, Trunk Trim Ring, SL Clip, Trim Ring Style Only, SL and Early 280SL Moulding, Windshield, Left Moulding, Windshield, Right R Sill Trim, Outer, Left, Repro R Sill Trim, Outer, Right, Repro R Sill Trim, Inner, Left, Repro R Sill Trim, Inner, Right, Repro H/T Lock Cap, Left H/T Lock Cap, Right Moulding Tail Panel Lower R Moulding, Fender, Lower, Left Repro Moulding, Tail, Left

25 R Moulding, Fender, Lower, Right, Repro Moulding, Tail, Right Moulding, Fender, Upper, Left Moulding, Fender, Upper, Right R Reproduction Moulding, Fender, Upper, Left R Reproduction Moulding, Fender, Upper, Right Moulding, 1/4, Upper, Left Moulding, 1/4, Upper, Right R Reproduction Moulding, 1/4, Upper, Left R Reproduction Moulding, 1/4, Upper, Right Moulding, 1/4, Lower, Left R Reproduction Moulding, 1/4, Lower, Left Moulding, 1/4, Lower, Right R Reproduction Moulding, 1/4, Lower, Right R Moulding, 1/4, Lower, Left, Repro R Moulding, 1/4, Lower, Right, Repro Moulding, Door Top, Left Moulding, Dr, Upper, Left R Reproduction Moulding, Dr, Upper, Left R Moulding, Dr, Lower, Left, Repro Moulding, Door Top, Right CALL Moulding, Dr, Upper, Right R Reproduction Moulding, Dr, Upper, Right R Moulding, Dr, Lower, Right, Repro Star, Trunk Handle, Door with Keys, Left Handle, Door with Keys, Right Mirror Assembly, 280SL, Left Mirror Assembly, 280SL, Right Emblem, Hood SL

26 Emblem, Trunk (230SL) Emblem, Trunk (280SL) Emblem, Trunk (250SL) - Not available CALL Grille Assembly R Rubber Guard Only: Reproduction Guard, Bumper, Front, Left R Bumper End Front Reproduction Chromed, Left Grille Star and Barrel Guard, Bumper, Front, Right R Bumper End Front Reproduction Chromed, Right Grille Screen, Left Guard, Rear Grille Screen, Right R Rear Bumper End, Left - Repro R Rear Bumper End, Right - Repro U Rear Bumper End, Left - Used CALL U Rear Bumper End, Right - Used CALL Cover, Bumper Joint R Reproduction Bumper Joint Cover Grille Wing, Left Grille Wing, Right Grille Frame: Original R Reproduction Grille Frame Cover, Wheel Clip, Full Cover Only Hub Cap, SL and Early 280SL Clip, Wheel Cover, 280SL, Hub Cap Only Chassis - Rubber Seals and Gaskets - Pg. 14

27 Retainer, Early Seal, European Style Headlamp Seal, Guards to Bumper Sealer, 750mm Seal, Trunk Handle Retainer, Late Gasket, Late Grommet, Headlamp Wiring, Right Gasket, Early Seal, Front Fender Shield Filler Neck Grommet Seal, Hardtop Rear Glass R Seal, Hardtop Side Glass, Left R Seal, Hardtop Side Glass, Right Seal, Windshield R Seal, Windshield: Reproduction Sill Rubber Mat, Left Sill Rubber Mat, Right Seal, Filler Neck Seal, Door, Left R Seal, Door, Left: Reproduction Seal, Door, Right R Seal, Dorr, Right: Reproduction Seal, Windshield Pillar R Seal, Windshield Pillar: Reproduction Seal, Hardtop and Soft Top to Door Glass, Left R Seal, Hardtop and Soft Top to Door Glass, Left: Reproduction Seal, Hardtop and Soft Top to Door Glass, Right R Seal, Hardtop and Soft Top to Door Glass, Right: Reproduction Seal, Trunk

28 Seal, Top Cover Seal, Trunk Lock Seal Set, Door Handles, 4 Pieces Seal, Soft Top to Body Seal, HardTop to Body Seal, Hardtop and Soft Top to Windshield R Seal, Hardtop and Soft Top to Windshield: Reproduction Seal, Taillamp, Left Sealk Taillamp, Right Seal, Cowl Vent Bumper, Deck Lid Bumper, Hood On Lt Plate Grommet Set, Firewall 230SL Grommet Set, 280SL (31 Pieces) Seal, Gas Cap Grommet, Headlamp Wiring, Left Felt Seal - Sold individually, but 4 are needed total Glass, Mirror Bumper, Hood Adjustable, Rear Chassis - Body Lighting - Pg Lamp, Side Marker, Rear, Left Lamp, Side Marker, Rear, Right Lamp, Side Marker, Front. Left Lamp, Side Marker, Front, Right Reflector, Side Marker Rear, Left Reflector, Side Marker Rear, Right Reflector, Side Marker Front, Left

29 Reflector, Side Marker Front, Right Socket, Parking Lamp Seal, Lens to Base Seal, Headlamp Assembly to Body Lamp, License Socket, Taillamp, Left Socket, Taillamp, Right Headlamp Assembly European Holder, Bulb with Retainer Lamp, Courtesy RCA Taillamp Colored Lens SL, Left RCR Taillamp, Left R RCR Color of Lens Only, Left RCR Taillamp Seal, Left R Reproduction RCR Taillamp Colored Lens, Left RCR Taillamp Colored Lens, Right R Reproduction RCR Taillamp Colored Lens, Right RCA Taillamp Seal, Left RCA Taillamp Seal, Right CALL European RCA Taillamp Colored Lens SL, Right RCR Taillamp R RCR Color of Lens Only, Right Lens, Glass. *NOTE: At checkout, include Bosche number on glass. It will be or Rim, with Lens (LE1657 AC) Rim, with Lens (LE1657 AN) Rim, with Lens (LE1657 AJ) Rim, Taillamp, SL, Left Rim, Taillamp, SL, Right

30 113Chassis - Mats, Carpet and Upholstry - Pg Cover Under Dash 3-Piece Set*NOTE: At checkout, state whether manual or automatic shifter Wood Kit piece Seat Bottom Pads, Left Seat Bottom Pads, Right TEX Vinyl Upholstery Kit LEATHER Leather Upholstery Kit FS-LTHR Front Seat Cover (4 pc. Leather) DP-LTHR Door Panel Skin (2 pc. Leather) HR-LTHR Head Rest Pair Covers (2 pc. Leather) LC-LTHR Lid Cover (Leather) FS-TEX Front Seat Covers (4pc. Vinyl) DP-TEX Door Panel Skin (2 pc. Vinyl) HR-TEX Head Rest Pair Covers (2 pc. Vinyl) LC-TEX Lid Cover (Vinyl) LTHR Leather (Each unit is one square foot. Half a hide or about 30 square feet are required for upholstery) Insulation Set, Firewall Pad Under Dash R Door Panel Board Front Floor Mat, Left Front Floor Mat, Right SQW Carpet, Square Weave 230SL Carpet Set, Multiloop Insulation, Floor and Trunk (17pcs) Trunk Mat 230SL, Left Trunk Side Cover, Right Trunk Side Cover, Left

31 Trunk Mat 230SL, Right PER Headliner ME-678-G1 Canvas Top, Black CALL ME-678-G2 Canvas Top, Brown CALL ME-678-G3 Canvas Top, Blue CALL ME-678-G4 Canvas Top, Tan CALL Spring, Top Frame Moulding, Top Rear 230SL Seal, Top to Windshield Frame R Seal, Repro, Top to WS Frame Handle Set, Conv. Top (Pair) Bolt, Shoulder, at Pivot Point 6.90 Please note that we cannot guarantee our prices due to fluctuating supply, currency exchange, and cost of materials.