Product description Manual pump L5P DESCRIPITION FUNCTION SYSTEM OUTLINE
|
|
- Madlyn Flowers
- 5 years ago
- Views:
Transcription
1 Product description Manual pump L5P DESCRIPITION The L5P manual pump is perfectly adapted for use with resistance oil meter units (SLR) on medium size machines with no more than 30 lubrication points. FUNCTION The L5P manual pump works like an accumulator. On pushing the handle, the spring is compressed and the internal chamber is filled with a pre-determined oil quantity. On releasing the handle, the spring loaded piston pushes the oil into the distribution circuit. Oil volume discharge is measured without any viscosity influence. SYSTEM OUTLINE 1 / 5 P_2009_1_L5P _GB
2 CHARACTERISTICS Discharge... from 1 to 5 cm 3 /stroke (setting screw and stop nut are inside the reservoir) Pressure... 5 bar max. Reservoir capacity... 0,475 litre Filter... suction filter 40 µm, must be regularly checked and replaced once a year Lubricant to be used... mineral oil with viscosities 30 to 1500 Cst at working temperature System limits see in chapter "technical information" the indications on how many lubrication points can be lubricated in regard to the discharge of the pump per cycle. Ordering instructions Specify description: reference = Pump L5P 2 / 5 P_2009_1_L5P _GB
3 DRAWING PUMP L5P Discharge cm 3 /stroke stroke (mm) 25,5 28,5 31, Item Description Quantity 1 Outlet connector 1 2 Discharge adjustment screw 1 3 Filling plug 1 4 Identification label 1 5 Reservoir gasket 1 6 Plastic reservoir 0,5 L 1 7 Filter element 1 8 Handle 1 3 / 5 P_2009_1_L5P _GB
4 SERVICE INSTRUCTIONS PUMP L5P Start Up Fill the reservoir and operate the handle until oil arrives at each lubrication point. Oil Use only clean mineral oil, of a quality and viscosity as recommended by the manufacturer of the machine. The oil characteristics must allow filtering down to 40 microns without it separating. Service The pump must be operated as often as recommended by the machine manufacturer. Check regularly the oil level and fill the reservoir as necessary. Control periodically the lubrication lines to ensure none are broken or crushed and that they are in good condition. Ensure all fittings are correctly tightened. Check regularly the suction filter and replace it once a year. Spare parts For ordering, specify reference and type of pump. If possible also advise serial number of the pump. Maintenance kit for pump L5P. Reference A0-281 For all repairs, it is recommended that the pump be returned to Bijur. MAINTENANCE KIT PUMP L5P Reference Description Quantity A0-281 Reservoir gasket 1 Filter element 1 Reservoir screw 4 Handle 1 Plastic reservoir 0,5 L 1 Filling plug 1 4 / 5 P_2009_1_L5P _GB
5 Germany Spain France Arminstraße 15 Avda. Txori-Erri 38 BP 50 D Düsseldorf Sondica - (Vizcaya) ZI de Courtabœuf Postfach Tel : (34) , Avenue de I'Atlantique D Düsseldorf Fax : (34) Courtaboeuf Cedex Tel: (49) Tel : (33 ) Fax : (49) Fax : (33) info@delimon.de contact@bijurdelimon.com United Kingdom Ramsden Court, Ramsden Road No B-5 & 6, A Block, SNS Arcade, & Rotherwas Industrial Estate Airport Road (HAL),BANGALORE Hereford India HR2 6LR Niederlassung Beierfeld Tel : +44 (0) Tel : (91 0 ) / 3959 / 652 Am Bockwald 4 Fax : +44 (0) mksantosh@bijurdelimon,in D Grünhain-Beierfeld info@delimon.co.uk www,bijurdelimon,com Tel : (49) Fax : +(49) Ireland Gort Road Austria Ennis, county Clare Am Spitz 2-3 / Schloßhofer Str. 4-6 USA Ireland Stiege 4, Top Gateway center Tel : A-1210 Vienna Blvd suite 109 Fax : Tel : (43) Morrisville NC Fax : (43) Tel : info@delimon.at Fax : China 9 Heng Tong Road Nanjing Economical And Technical Development zone Nanjing Tel : Fax : / 5 P_2009_1_L5P _GB
DESCRIPTION OPERATION. Product description Electrical pump VERSA III
Product description Electrical pump VERSA III DESCRIPTION The VERSA III pump is an electrically operated gear pump intended for use in volumetric type (PDI) centralised lubrication systems. This compact
More informationOperating maximum : 45 bars (650 psi) Operating minimum : 15 bars (220 psi) Relieving 0.7bars (11psi)
Product description ZEM Injector DESCRIPTION The ZEM Series injectors are positive displacement injectors (PDIs) that deliver precise and controlled lubrication outputs, meeting the exact requirements
More informationDESCRIPTION OPERATION. Product description Electrical Pump FZB
Product description Electrical Pump FZB DESCRIPTION The FZB type lubricator is a central plunger grease pump which is operating without valves and springs. The numerous ratios available within the range
More informationDESCRIPTION OPERATION. Product descripption SureFire Electrical Pump
Product descripption SureFire Electrical Pump DESCRIPTION The SureFire centralised lubrication system is robust and durable, capable of handling oil and fluid greases. Available in four reservoir capacities
More informationAn IMCI Company. General Product Line Pumps - Dividers - Various
An IMCI Company General Product Line Pumps - Dividers - Various Pumps Type: BM-B 8 / 15 / 30 litre 2 / 4 l/h / Liquid grease Type: BS-B 60 / 100 litre 7 / 14 / 22 l/h / Liquid grease Type: FZ-A/-B 200
More informationAn IMCI Company. Central Lubrication Systems for Machine tools. Products - Engineering - Service
An IMCI Company Central Lubrication Systems for Machine tools Products - Engineering - Service About us The BIJUR DELIMON International Group includes brands known throughout the world: BIJUR, DELIMON,
More informationAIR-OIL injector BLOCK. Oil Streak Generating, Mixing and PDI systems
AIR-OIL injector BLOCK Oil Streak Generating, Mixing and PDI systems General The Air-Oil Injector Block Assembly is available with one to eight Positive Displacement Injectors(PDI). Each outlet has an
More informationAn IMCI Company. Lubrication with oil and air
An IMCI Company Lubrication with oil and air About us The BIJUR DELIMON International family includes well-known brands from the field of lubrication technology: BIJUR, DELIMON, DENCO Lubrication, FARVAL
More informationTotal Lubrication Management
With Bijur Delimon International you can reduce wear, avoid downtime, guarantee precision and reliability... and, be environmentally friendy. This is what you ll come to expect when you partner with us
More informationAn IMCI Company. Stationary or mobile Railway Lubrication
An IMCI Company Stationary or mobile Railway Lubrication Wheel flange lubrication system RAILJET When underground trains, trams and railway trains run from one station to the next with a low noise level,
More informationOperating manual Dual-line distributor ZV-B BA_2018_1_GB_ZVB
Operating manual Dual-line distributor ZV-B BA_2018_1_GB_ZVB Index 1. General... 2 2. Safety... 2-3 3. Application... 4 4. Specification... 4 5. Dimension... 5 6. Coding / Example of order... 6 7. Design...
More informationOperators Manual Electric Barrel Pump r#0
Operators Manual Electric Barrel Pump 36915 r#0 Contents General Data & Features...Page 2 Operation...Page 3 Technical Data...Page 3 How to Order...Page 4 Service Parts...Page 5 Exploded View...Page 6
More informationAn IMCI Company. Lubrication assistance. Semi-automatic centralized lubrication systems. Grease guns - Divider - Accessories
An IMCI Company Lubrication assistance Semi-automatic centralized lubrication systems Grease guns - Divider - Accessories About us The BIJUR DELIMON International Group includes brands known throughout
More informationFluidFlex PRESSURIZED DISPENSING SYSTEM. Industry s economical solution for cooling, lubricating and process wetting.
An IMCI Company FluidFlex PRESSURIZED DISPENSING SYSTEM Industry s economical solution for cooling, lubricating and process wetting. For air-delivered fluid applications Industry s most versatile pressurized
More informationAn IMCI Company. Central Lubrication Systems for mobile applications. Products - Accessories - Service
An IMCI Company Central Lubrication Systems for mobile applications Products - Accessories - Service About us The BIJUR DELIMON International Group includes brands known throughout the world: BIJUR, DELIMON,
More informationProgressive Central Lubrication System
Progressive Central Lubrication System APPLICATION Centralized lubrication systems with progressive distributors preferably serve the lubrication of machinery. The lubrication capacity is up to approx.
More informationPNEUMATIC PUMP Series
PNEUMATIC PUMP Series 3103... User and Maintenance Manual Original text translation TABLE OF CONTENTS 1. INTRODUCTION 2. GENERAL DESCRIPTION 3. PRODUCT-MACHINE IDENTIFICATION 4. TECHNICAL CHARACTERISTICS
More informationAn IMC/IMCI Company LUBESITE SYSTEMS. The full line of cost reducing, single-point lubrication solutions.
An IMC/IMCI Company LUBESITE SYSTEMS The full line of cost reducing, single-point lubrication solutions. WWW.BIJURDELIMON.COM Contents Overview...3 LubeSite Grease Feeders...4 Installation...6 LubeSite
More informationAirmatic Lubricator. Pneumatic Operation, Oil. General. Application. Operation. Technical Data
Airmatic Lubricator Pneumatic Operation, Oil General The Airmatic lubricator is a simple economical unit with a broad range of output. It is designed to be operated with shop air. The stroke setting is
More informationSureFire II Lubricator
SureFire II Lubricator Automatic, Oil & Fluid Grease, Three Phase General The SureFire II Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements
More informationOperating instructions Spray nozzle SDU
Operating instructions Spray nozzle SDU INDEX Page 1. General... 2 2. Safety... 2 4 A. Nozzles type... 5 B. Nozzles inserts... 5 C. Revision... 5 D. Monitoring... 6 E. Heating... 6 F. Accessories... 6
More informationOUTLINE DIMENSIONS HIGH PRESSURE PUMP HDF 40/40-8 1/6. High pressure pump HDF 40/40-8. HYDRAULIC FLOW l/min, max. 10. HYDRAULIC PRESSURE bar, max.
1/6 HIGH PRESSURE PUMP HDF 40/40-8 OUTLINE DIMENSIONS HYDRAULIC FLOW l/min, max. 10 HYDRAULIC PRESSURE bar, max. 220 WATER DISCHARGE l/min, max. 40 WATER PRESSURE bar, max 40 3 4 WEIGHT kg 8 315 P T 1
More informationSTAUFF STAUFF. Local solutions for individual customers worldwide. Return Line Filters RTF FILTRATION TECHNOLOGY. Ordering Code # :SFT A - UK
STAUFF THIS IS STAUFF RESPONSE AND FLEXIBILITY COMPETENT SERVICE PROMPT DELIVERY ENSURED QUALITY FRIENDLY SERVICE PROVEN IN PRACTICE Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227, Unanderra Wollongong,
More informationM OTO R. The electric motor. DC - direct current voltage.
TMD-5 Lubricator Automatic Cyclic Before installing or operating this lubricator, please read this manual carefully. Failure to follow instructions can result in damage to the product and/or serious bodily
More informationInstruction Sheet. Booster and Wand PRODUCTION AUTOMATION IMPORTANT RECEIVING INSTRUCTIONS CONTENTS
PRODUCTION AUTOMATION L1840 Rev. O 05/94 IMPORTANT RECEIVING INSTRUCTIONS Instruction Sheet Booster and Wand Visually inspect all components for shipping damage. If any shipping damage is found, notify
More informationOperating instructions FPCC FPFG FPCG FPFX FPAC
Vane pumps Operating instructions FPCC 65 -... FPFG 65 -... Index Page Proper use 2 Type code 2 Technical data 3 Installation 3 Start-up 10 Maintenance 13 Trouble shooting 13 ALFONS HAAR MASCHINENBAU GMBH
More informationMOTOR. The electric motor. DC - direct current voltage.
TMD-5 Lubricator Automatic Cyclic Before installing or operating this lubricator, please read this manual carefully. Failure to follow instructions can result in damage to the product and/or serious bodily
More informationProgressive Block Distributor PVB
Operating manual Progressive Block Distributor PVB BA_2017_1_GB_PVB 1 BIJUR DELIMON INTERNATIONAL BA_2017_1_GB_PVB INDEX 1. General... 2 2. Safety... 2 3 3. Application and General Features of Product...
More informationParts Manual PL C 12/28/2010. MP4400 Series (Type 4) Random Orbital Sander. Non-Vacuum Models. Vacuum Models MP 44 XX - XX XX
Parts Manual MP4400 Series (Type 4) Random Orbital Sander Non-Vacuum Models Vacuum Models MP 44 XX - XX XX Orbit Pattern 00 = 3/6" Offset (Black Handle) - Standard Sanding Orbit 03 = 3/32" Offset (Chrome
More informationFarval. Dualine Installation System Start-Up. Bulletin DL300 BIJUR DELIMON INTERNATIONAL
Farval Dualine Installation System Start-Up Bulletin DL300 BIJUR DELIMON INTERNATIONAL 2685 Airport Road Kinston, NC 28504 Tel. 800-227-1063 Fax: 252-527-9232 website: www.bijurdelimon.com DC1-1 SECTION
More informationParts Manual. cascade
c Parts Manual Model Serial Number F-Series Sideshifter -SSS-A147R0 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234
More informationOperating manual. Pump Dynamis BA_2017_1_GB_DYN. 1 BIJUR DELIMON INTERNATIONAL BA_2017_1_GB_DYN (Rev. B)
Operating manual Pump Dynamis BA_2017_1_GB_DYN 1 BIJUR DELIMON INTERNATIONAL BA_2017_1_GB_DYN (Rev. B) INDEX 1. General... 2 2. Safety... 2 3 3. Application... 4 4. Dimensions and Design... 4 5 5. Sub-assemblies,
More informationABS Dry Installed Waste Water Pumps Series FR
A Operating Instruction 3 ABS Dry Installed Waste Water Pumps Series FR Shaft Seal Close-coupled and Bearing Assemblies 3R, 4R, 5R, 5F and 6F! Observe for hazardous liquids that there can be liquid left
More informationAIRMIX PUMP and LOW-PRESSURE PUMP air motor with reversing block
INSTRUCTION MANUAL AIRMIX PUMP and LOW-PRESSURE PUMP air motor with reversing block Manual : 0306 573.002.212 Date : 12/06/03 Supersedes : 17/06/02 Modif. 1 + 4 added KREMLIN REXSON Site de Stains : 150,
More informationSundyne. HMP-3000, HMP-5000 and HMP-7000 Integrally Geared Centrifugal Pumps
Sundyne HMP-3000, HMP-5000 and HMP-7000 Integrally Geared Centrifugal Pumps HMP Series 3000 5000 7000 Sundyne HMP For more than 50 years, Sundyne has lead the industry as a fluid handling technology innovator.
More informationSPECIFICATIONS AND OUTLINE DIMENSIONS
1 SPECIFICATIONS AND OUTLINE DIMENSIONS HIGH PRESSURE PUMP HPW 200/30-45 245 1 Dynaset HPW pump gives great water power with small amount of water in relation to its size. As self-priming it is productive
More informationInstallation, Operating & Maintenance Manual IN-LINE MICRONIC FILTERS. Models M M A M A. (Original Instructions)
Installation, Operating & Maintenance Manual (Original Instructions) IN-LINE MICRONIC FILTERS Models M39-00 M39-300A M39-450A 4993000 September 03 Contents Description Page General Description 3 Dimensions
More informationSeptember 2012 JLe HIGH PRESSURE PUMP HPW 1600/ (LS)
1 HIGH PRESSURE PUMP HPW 1600/15-140 September 2012 JLe OUTLINE DIMENSIONS WP P T S 1 3 S 150 Ø 8.0 30 90 155 405 155 195 5 30 40 M 10 4 pcs. HYDRAULIC FLOW l/min, max. 140 FLUID CONNECTIONS HYDRAULIC
More informationInjection oilers, micro pumps
1-5012-4-EN Injection oilers, micro pumps for minimal quantity metering Injection oiler, 3-port type Injection oiler, 1-port type Micro pump Delivery rates Metering pumps deliver lubricants in a measured
More informationPiston Distributors, Metering Units
Piston Distributors, Metering Units 1-5001-US For single-line total-loss lubrication systems Group 320 0.01-0.16 ccm Group 321 0.03-0.1 ccm Group 340 0.01-0.16 ccm Group 350 0.1-0.6 ccm Group 390 0.2-1.5
More informationParts Manual. cascade
c Parts Manual Model F-Series Sideshifter Serial Number -SSS-A156R0 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234
More informationSINGLE ACTING METRIC RANGE
CONTENTS Page 2 General specifications Ram Style No. Female Rod Male Rod Pin Hole 3 Part Numbering System 4 Dimensions 5 Buckling Calculations 6 Buckling Force/ Graphs 7 Load Calculations 8 PBV Flow Chart
More informationSTAUFF STAUFF. Local solutions for individual customers worldwide. Medium Pressure Filters SMPF FILTRATION TECHNOLOGY
STAUFF THIS IS STAUFF RESPONSE AND FLEXIBILITY COMPETENT SERVICE PROMPT DELIVERY ENSURED QUALITY FRIENDLY SERVICE PROVEN IN PRACTICE Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227, 24-26 Doyle Avenue,
More informationOperating Instructions Distributor ZP-A/G
INDEX Page 1. General... 2 2. Safety... 2 4 A. Distributor type... 4 B. Number of segments... 4 C. Inspection... 5 D. Monitoring... 5 E. Throttle insert... 5 F. Solenoid valve... 5 G. Coding of the outlets...
More informationFPO 80 FPOC FPOS FPON, FPOS Tank truck vane pump
FPOC 100 -... FPOS 100 -... FPO 80 Tank truck vane pump Operating instructions FPOD, FPOG, FPOJ, Index Page Proper use 2 Type code 3 Technical data 4 Application notes 4 Dimensions 5 Flow charts 9 Input
More informationFire Engine Dump Valve
Fire Engine Dump Valve INSTRUCTIONS Installation - Operation - Inspection - Maintenance 1-3" ROSS MODEL - 20WR-D Fire Engine Dump Valve Serial #S ROSS VALVE Mfg. Co., Inc. 6 OAKWOOD AVENUE, TROY, NY 12180
More information-... I" undyne ' " Technical Profile. GSA/GSI frame II Magnet drive, end suction, centrifugal pumps to ISO 2858 / DIN. EN 22858: 1993 / ANSI B73.
Technical Profile 0. undyne GSA/GSI frame II Magnet drive, end suction, centrifugal pumps to ISO 2858 / DIN. EN 22858: 1993 / ANSI B73.3M A versatile range of general service pumps designed to cover a
More informationALLWEILER. Pressure-relief valves, indirectly pilot-controlled. Series DVI
Pressure-relief valves, indirectly pilot-controlled Series DVI Range of application The pressure-relief valves of Series DVI can be applied for maximum operating temperatures up to 150 C (higher temperatures
More informationInjection Oilers, Micro Pumps
Injection Oilers, Micro Pumps 1-5012-4-US for minimal quantity metering Magnetic piston pump Injection oiler Micropump Grease metering P Metering pumps deliver and meter out lubricants. This piston pumps
More informationxxx displacement pumps TXV for trucks
Variable xxx xxx displacement pumps TXV for trucks 1 sommaire why use a variable displacement pump?... 3 your hydraulic equipment.................. 4 load-sensing.... 5 variable displacement... 6 TXV 40
More informationGlobal Gear Products. Brochure. SAE A-Aluminum (Group 2)
Global Gear Products Brochure SAE A-Aluminum (Group 2) High Efficiency, Low Noise Applications for Eaton Gear Products Turf care Agriculture tractors and harvesters Lift trucks Skidsteer loaders Fan drive
More informationFLUID HANDLING: Drum Filter Cart
FLUID HANDLING: Drum Filter Cart This cart is ideal for pre-cleaning, protecting, and transferring oil from a conveniently attachable, secured drum. A drum adapter kit with a desiccant breather is included
More informationAir Driven Hydraulic Pumps
XA-Series Air Driven Hydraulic Pumps The breakthrough in hydraulic pump technology & ergonomics. 700 bar pumps with XVARI Technology, exclusively from Enerpac! Ergonomic design for less operator fatigue
More informationCOMPACT DRY PUMPING SYSTEMS DRYTEL SERIES
COMPACT DRY PUMPING SYSTEMS DRYTEL SERIES COMPACT DRY PUMPING SYSTEMS DRYTEL SERIES Dry pumping units The Drytel series of products are dry pumping systems that include an Adixen molecular drag pump (MDP)
More informationOil Solutions. Tank Top Return Filters RTF. Local solutions for individual customers worldwide FILTRATION TECHNOLOGY
Oil Solutions FILTRATION TECHNOLOGY Tank Top Return Filters RTF Local solutions for individual customers worldwide www.oilsolutions.com.au sales@oilsolutions.com.au Distributor Walter Stauffenberg GmbH
More informationSundyne SUNFLO High-Pressure Centrifugal Pumps
Sundyne SUNFLO High-Pressure Centrifugal Pumps Sundyne Sunflo - Flexible Efficiency The Sundyne Sunflo family of high head, low flow medium duty pumps has been an industry leading choice for fluid handling
More informationSPECIFICATIONS AND OUTLINE DIMENSIONS
/7 May 05 JAS Dynaset HPW pump gives great waterpower with the best power to weight ratio in the World. Small size, lightweight, outstanding durable construction with ingenious piston-to-piston action
More informationDOUBLE ACTING METRIC RANGE
CONTENTS Page 2 General specifications Ram Style No. Female Rod Male Rod 3 Part Numbering System 4 Basic Dimensions 5 Load Calculations 6 Load Calculations 7 Buckling Calculations 8 Buckling Calculations
More informationOperating instructions Chain lubrication aggregate WSE
Operating instructions Chain lubrication aggregate WSE INDEX Page 1. General... 2 2. Safety... 2 4 A Aggregate type... 5 B Number of outlets... 5 C Inspection... 5 D Kinds of drive... 5 E Position of drive:
More informationUse Type C control units. Viscosity range is 100 to 10,000 SSU at operating temperature. See Bijur Engineering Manual for system limitations.
V5W Lubricator Automatic Continuous Operation The V5W Lubricator consists of a motor-driven gear pump, with a controlled bypass valve. (constant volume or constant pressure models) The fully automatic
More informationPiston Pumps Series P2 / P3 Variable Displacement
Piston Pumps Series P2 / P3 Variable Displacement Catalogue HY11-2600/UK July 2003 Contents Series P2/P3 Description Technical information 3 Ordering code 4 Control options LA and LB 6 Control options
More informationMobile Filtration Systems SMFS-P and SMFS-U
SMFS-P-015 SMFS-U-030 SMFS-U-DL-015-G SMFS-U-060 SMFS-U-110 SMFS-U-CM-110 Mobile Filtration Systems SMFS-P and SMFS-U Introduction 2 Introduction STAUFF Filtration Technology offers a complete range of
More informationOperating instructions AUTOLUB-E
Operating instructions AUTOLUB-E INDEX Page 1. General... 2 2. Safety... 2 4 A. Pump type... 5 B. Number of outlets... 5 C. Inspetion... 5 D. Kinds of drive... 6 E. Position of drive... 6 F. Reservoir...
More informationHigh Flow Cartridge Valves 2/2 Way Series NG16 NG100
High Flow Cartridge Valves 2/2 Way Series NG1 NG100 Table of Contents Designation Symbol Page General Description and Operating Principle 3 Sectional View Types of Cones and Sleeves 4 Specifications and
More informationPressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T ) Buna-N (FKM on request)
HYDRAULIC FILTRATION Return filters, tank top mounting, inside-to-outside filtration Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.10.5.1) Burst 16 bar (232 psi) (acc. to
More informationParts Manual EN
Parts Manual PL30-1211 12-11 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com Nomenclature 12 X 1 1 XX - 36 XX OH Tool Series 12 = Ergo
More informationMA3W-2238 Radial Piston Power Motor
Parts Manual MA3W-2238 Radial Piston Power Motor For additional product information visit our website at http://www.apextoolgroup.com Specifications and Description Specifications Table: Model Maximum
More informationModular progressive distributor M2500G
Operating instructions Modular progressive distributor M2500G BA_2014_1_M2500G (35699) INDEX 1. General... 2 2. Safety... 2 3 A. Distributor type... 4 B. Number of segments... 4 C. Revision... 4 D. Monitoring...
More information16000SIII Automatic Grease System
Manual # 99905495 16000SIII Automatic Grease System Effective 20120716 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright
More informationStandard Cartridge Valves 2/2 Way Series NG16 NG100
Standard Cartridge Valves / Way Series NG NG Table of Contents Designation Symbol Page General Description and Operating Principle Specifications and Characteristic Parameters Typical Characteristic Curves
More informationINSTALLATION, OPERATION & MAINTENANCE MANUAL MODEL BC.
INSTALLATION, OPERATION & MAINTENANCE MANUAL MODEL ORBINOX SPAIN PolInd s/n-20270 ANOETA Tel:+34 943 698030 Fax:+34 943 653066 e-mail:orbinox@orbinoxcom ORBINOX CANADA, ORBINOX USA,, ORBINOX BRAZIL, ORBINOX
More informationFlow. Oval Wheel Flowmeter Model DOE
Oval Wheel FIowmeter for low and high viscous liquids measuring monitoring analysing DOE Measuring range: 0.5 36 l/h und 1 40 l/min Viscosity range: 1 1000 cp Accuracy: ±1% of reading Material: stainless
More informationOil Solutions. RIF 300 Return Line Filters. Local solutions for individual customers worldwide FILTRATION TECHNOLOGY
Oil Solutions FILTRATION TECHNOLOGY RIF 3 Return Line Filters Local solutions for individual customers worldwide www.oilsolutions.com.au sales@oilsolutions.com.au Distributor Walter Stauffenberg GmbH &
More informationZEUS type BRONZE PNEUMATIC ACTUATED VALVE
CHARACTERISTICS The ZEUS bronze pneumatic actuated valve is dedicated to the automatic shut-off of fluid pipework. The full bore angle body and the great flow rates permit to have very limited pressure
More informationMultiPort II Lubricator
MultiPort II Lubricator Mobile, Progressive, Grease General The MultiPort II Lubricator is an electrically driven multiple outlet lubrication unit designed primarily for use with progressive divider valve
More informationParts Manual. cascade
c Parts Manual Model Serial Number Revolving Drum Clamp D-DFR-AR0 corporation To Order Parts call: 888--, Fax: 888-9-0 OR Write: Cascade Corporation, P.O. Box 08, Portland, OR 90 Internet: www.cascorp.com
More informationPRODUCT SERVICE MANUAL FOR. F312XICR-312_, 325_, 400_ and 437_ Pumps. For Solar Turbines
PRODUCT SERVICE MANUAL FOR F312XICR-312_, 325_, 400_ and 437_ Pumps For Solar Turbines WARNING This manual and the General Installation, Operation, Maintenance and Troubleshooting Manual (SRM00046) should
More informationTo Protect Your Warranty, Use Only ENERPAC Hydraulic Oil.
Repair Parts Sheet ATLAS 3-HP GAS PUMP PGM04, PGM0, PGM404, PGM40, PGM304R, PGM30R, PGM404R, PGM40R L154 Rev. F 10/10 For Date Codes Beginning With the Letter O For Date Codes Beginning Without a Letter
More informationPRODUCT SERVICE MANUAL FOR BK12DHZ PUMPS
PRODUCT SERVICE MANUAL FOR BK12DHZ PUMPS WARNING This manual, and the GENERAL INSTRUCTION MANUAL SRM00046, should be read thoroughly prior to pump installation, operation or maintenance. Manual No. SRM00095
More informationRepair Parts Sheet. PUD1300B, PUD1301B, PUD1300E, PUD1301E 1/2 HP Portable Electric Pumps
Repair Parts Sheet PUD300B, PUD30B, PUD300E, PUD30E /2 HP Portable Electric Pumps L2582 Rev. E 04/0 For Date Codes Beginning with the Letter D Contents: Figure - Pump Side View...2 Figure 2 - Pump Front
More informationTRANSFER AND FILLING PUMPS SERIES
TRANSFER AND FILLING PUMPS SERIES 132000 132000 For Oil or Grease and Non-corrosive Fluids. PRODUCT DATA SHEET ENGLISH Only for 132630 DESCRIPTION: Piston pumps equipped with suction hose. Discharge.050
More informationA6R-2218 Reversible Axial Piston Power Motors
Instruction Manual A6R-2218 Reversible Axial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM * Stall
More informationMovopart M50 Installation and Service Manual Edition: 2 DW110242gb-0446
www.linearactuators.com Movopart M50 GB Installation and Service Manual Edition: 2 DW110242gb-0446 1. Installation 1.1 Mounting of the unit OK 1.2 Maximum distance between mounting points Fz Fz [N] 350
More informationRepair Parts Sheet. PUJ1200B, PUJ1200E, PUJ1201B, PUJ1201E, PUM1200B 1/2 HP Portable Electric Pumps
Repair Parts Sheet PUJ00B, PUJ00E, PUJ0B, PUJ0E, PUM00B / HP Portable Electric Pumps L0 Rev. J 0/09 For Date Codes Beginning with the Letter F T Contents: Figure - Pump Side View... Figure - Pump Front
More informationPARTS LIST PUMPS SLC1 - SLC2 - SLC3
P.L. : 1004-A01 Effective November 2014 Replaces June 2014 PARTS LIST PUMPS SLC1 - SLC2 - SLC3 Keep this parts lists with Installation, Operation and Maintenance Instructions. To order the required spare
More informationTG Series Gyratory Crusher. Highly Effective Crushing Solution.
TG Series Gyratory Crusher Highly Effective Crushing Solution www.trioproducts.com TRIO strives to provide the most rugged, robust, and reliable equipment for the most demanding environments. TRIO provides
More informationLUBRICATION PUMP UCD
LUBRICATION PUMP UCD Product description UCD lubrication pumps are used as a source of pressure lubricant for dualline lubricating systems equipped with dualline distributors for permanent, regular lubrication
More informationRISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q2 2017
RISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q2 2017 Corporates 4 0.57% 0.81% 0.84% 0.81% 4 8.75% 17.51% 26.12% 22.73% 57 0.23% 0.45% 1.66% 1.64% 58 33.81% 42.41% 45.00% 29.97% Corporates - Of Which: Specialised
More informationRISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q4 2017
RISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q4 2017 Corporates 10 1.22% 4.02% 26.81% 1.95% 9 15.68% 32.84% 36.64% 31.60% 51 0.20% 1.00% 4.08% 2.02% 54 34.12% 43.96% 45.10% 29.73% Corporates - Of Which:
More informationTUTORIAL QUESTIONS FOR THE INDUSTRIAL HYDRAULICS COURSE TEP 4205
TUTORIAL QUESTIONS FOR THE INDUSTRIAL HYDRAULICS COURSE TEP 4205 The book for the course is Principles of Hydraulic System Design, by Peter J Chapple. Published by Coxmoor Publishing Co., UK. Available
More informationHydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit
Introduction *not included Pump with standard compensator, code: "omit" With thru shaft option for multiple pump options Swash plate type for open circuit Pump with load sensing, code: "A" Mounting style
More informationPF400 OPERATING MANUAL
Drawing : - TPC260 Issue :-8 Date : - 10/12/13 PF400 OPERATING MANUAL www.eipl.co.uk Page 1 of 8 PF400 PACKAGE CONTENTS Item Description Quantity 10943RD-US Power Fan / Ventilator 1 TPC260 Manual 1 Page
More informationHydraulic piston PA PAC PAD. Series
Hydraulic piston pumps PA PAC PAD Series Contents Design of.... 1 Range and characteristics... 2 Characteristics and dimensions... 3 Performance.... 4-5 Accessories.... 6 Shaft sealing... 7 New models
More informationL2792 Rev. B 08/11 For Date Codes Beginning with the Letter A, B or C. 1 DD Decal, Reservoir 2 DA Gasket. Item
Repair Parts Sheet POWERFUL SOLUTIONS. GLOBAL FORCE. BP Series Battery Powered Hydraulic Pump L79 Rev. B 08/ For Date Codes Beginning with the Letter A, B or C 06 0 Item 0 Includes manifold only. (no pump
More informationOPERATING AND MAINTENANCE INSTRUCTIONS HYDRAULIC ELECTRICAL PUMPS HAM (Manual control) HAE (Electrical control)
OPERATING AND MAINTENANCE INSTRUCTIONS HYDRAULIC ELECTRICAL PUMPS HAM (Manual control) HAE (Electrical control) Part Nr : HA M 4 6 2 1 B C 1. Essential safety requirements. 2. Technical Characteristics.
More informationEMTEC -C PUMPS FOR HIGH PRESSURE COOLANT SUPPLY
CAPABILITIES EMTEC -C PUMPS FOR HIGH PRESSURE COOLANT SUPPLY BRINGING NEXT LEVEL PERFORMANCE TO COOLANT PUMPS ALLWEILER 2 3 PUMP LIFE INTO YOUR MOST CRITICAL EQUIPMENT COOLANT PUMPS CAN SIGNIFICANTLY EXTEND
More informationIn line high pressure filters. HF 725 series
In line high pressure filters HF 725 series THE IMPORTANCE OF AN EFFICIENT FILTRATION The main cause of anomalies in hydraulic systems has to be attributed to the presence of contaminants in the fluid.
More informationAir Trap TATSU2. Copyright 2013 by TLV CO., LTD. All rights reserved ISO 9001/ ISO M-02 (TATSU2) 7 August 2013.
172-65177M-02 (TATSU2) 7 August 2013 ISO 9001/ ISO 14001 Manufacturer Kakogawa, Japan is approved by LRQA LTD. to ISO 9001/14001 Air Trap TATSU2 Copyright 2013 by TLV CO., LTD. All rights reserved 1 Contents
More informationLUBRICATION PUMP UCF CENTRAL LUBRICATION
LUBRICATION PUMP APPLICATION Lubrication pumps are used as a source of pressure lubricant for lubricating systems equipped with progressive distributors for permanent, regular lubrication of various machines,
More informationHydraulic Pump Series F1 Fixed Displacement
Fixed Displacement Catalog 9129 8201-02 August, 1997 GB Content General information 3 Specifications 4 Pump and line selection 5 Ordering code 5 Standard versions 5 Installation dimensions 6 Installation
More information