SPECIFICATIONS AND OUTLINE DIMENSIONS
|
|
- Merryl Skinner
- 5 years ago
- Views:
Transcription
1 1 SPECIFICATIONS AND OUTLINE DIMENSIONS HIGH PRESSURE PUMP HPW 200/ Dynaset HPW pump gives great water power with small amount of water in relation to its size. As self-priming it is productive even in hard environment. Small size, light weight, durable construction and piston to piston action without rotating parts make hydraulic high pressure pump cost effective. HPW 200/ pump types: - ST Water pressure- and unload valve - AIS Centerbody stainless steel - AB Center body aluminium bronze - AB-AL Center body aluminium bronze + water heads aluminium P T S HYDRAULIC FLOW l/min, max. 45 HYDRAULIC PRESSURE bar, max. 210 WATER FLOW l/min, max. 30 WATER PRESSURE bar, max 200 WEIGHT kg 8 HYDRAULICS FLUID CONNECTIONS PUMPING FLUID pressure return outlet intake P T S BSP 1/2 BSP 1/2 BSP 3/8 BSP 3/4 HIGH PRESSURE PUMP HPW 200/30-45-ST S 5 M8 x4
2 2 HIGH PRESSURE PUMP HPW 200/30-45-ST MAIN ASSEMBLY Note! The pressure valve s spring is shorter and of considerably bigger deflection rate than the suction valve s one. Do not mix up the valves when re-assembling the pump! NOTE! WHEN ORDERING PARTS, UNIT'S TYPE, MODEL AND SERIAL NUMBER SHOULD BE QUOTED, TOGETHER WITH THE PART DESCRIPTION.
3 3 PART / COMPONENT LIST Pos STOCK DESIGNATION DETAILS QUANTITY NUMBER HPW200/ D HPW-PUMP, ASSEMBLY HPW200/ CENTRE BODY, ASSEMBLY BLOCK 63 HPW HF-PLUG R 3/8 3 (2, 1) PT-FLANGE R1/2 TANK MIN. PRESS. VALVE PT-BLOCK TANK R1/ MINIMUN PRESSURE VALVE ASSEMBLY 1/ HF-PLUG R 3/ HF PLUG R1/ O-RING 17 Included into a seal kit ALLEN SCREW M6x Nm WATER HEAD, LEFT, ASSEMBLY HEAD BODY, LEFT L WATER PISTON SEAL, 2T Included into a seal kit O-RING 27 Included into a seal kit PLUG, SOCKET HEAD RK3/ WATER HEAD, RIGHT, ASSEMBLY HEAD BODY, RIGHT R WATER PISTON SEAL, 2T Included into a seal kit O-RING 27 Included into a seal kit HF PLUG RK3/ SEALING FLANGE HPW 200/ FLANGE BODY WATER PISTON SEAL, 1T Included into a seal kit WATER PISTON SEAL, 2T Included into a seal kit O-RING 57, FLANGE Included into a seal kit INTAKE VALVE D VALVE SEAT VALVE DISK VALVE CAP SPRING, SUCTION O-RING 20 Included into a seal kit DISCHARGE VALVE D VALVE SEAT VALVE DISK VALVE CAP SPRING, PRESSURE O-RING 20 Included into a seal kit PISTON ASSEMBLY HPW HYDRAULIC PISTON 55/44, SET SCREW M5x6 10 Nm SEAL 55 Included into a seal kit SET SCREW M5x REVERSAL VALVE VALVE SPOOL VALVE SEAT WATER PISTON REVERSAL VALVE GUIDE SEAL 18 EXCLUDED FROM A SEAL KIT CYLINDER LINER 44, O-RING 57 Included into a seal kit ALLEN SCREW M10x Nm 10 2 V UNLOADER VALVE, COMPLETE DST-261 /OPTIONAL (-ST) PRESSURE GAUGE, COMPLETE D63, 250 bar, 1/ ELBOW FITTING NPT1/4 -RK3/ HOSE COUPLING 25- R 3/ RUBBER CUSHION 40/30-M8 4
4 4 PUMP TYPES DIFFERING FROM BASIC PUMP ASSEMBLY Pos STOCK NBR DESIGNATION DETAILS QUANTITY / TYPE 1 D HPW-PUMP, ASSEMBLY HPW200/ ST 1 D HPW-PUMP, ASSEMBLY HPW200/ AIS 1 D HPW-PUMP, ASSEMBLY HPW200/ AB 1 D HPW-PUMP, ASSEMBLY HPW200/ AB-AL CENTRE BODY, ASSEMBLY HPW CENTRE BODY, ASSEMBLY HPW CENTRE BODY, ASSEMBLY HPW CENTRE BODY, ASSEMBLY HPW CENTRE BODY CENTRE BODY AIS HPW CENTRE BODY NiAp HF-PLUG R 3/ HF-PLUG R 3/8 A WATER HEAD, LEFT, ASSEMBLY HPW WATER HEAD, LEFT, ASSEMBLY HPW200 AIS WATER HEAD, LEFT, ASSEMBLY HPW200 AB WATER HEAD WATER HEAD 200 AIS WATER HEAD 200 Niap HF-PLUG RK3/ HF-PLUG R 3/8 A WATER HEAD, RIGHT, ASSEMBLY HPW WATER HEAD, RIGHT, ASSEMBLY HPW200 AIS WATER HEAD, RIGHT, ASSEMBLY HPW200 AB WATER HEAD, RIGHT WATER HEAD, RIGHT 200 AIS WATER HEAD, RIGHT 200 Niap HF-PLUG RK3/ HF-PLUG R 3/8 A ALLEN SCREW M10x ALLEN SCREW M10x45 A HYDRAULIC PISTON ASSEMBLY CODE V SPARE PARTS HYDRAULIC PISTON ORIFICE SET SCREW M5x SEAL SET SCREW M5x CYLINDER LINER O-RING VALVE SEAT VALVE SPOOL 24 1 SEAL KIT Code V O-RING WATER PISTON SEAL, 2T O-RING WATER PISTON SEAL, 1T O-RING 57, FLANGE O-RING SEAL O-RING 57 1 WATER VALVE KIT Code V INTAKE WATER VALVE DISCHARGE WATER VALVE O-RING 20, WATER VALVE O-RING 27 4 SCREW KIT Code V ALLEN SCREW M6x SET SCREW M5x SET SCREW M5x ALLEN SCREW M10x SPARE PARTS
5 5 UNLOADER VALVE ASSEMBLY (ST) BYPASS UNLOADER VALVE ASSEMBLY Code V UNLOADER VALVE DST PLUG, SOCKET HEAD RK1/ ELBOW FITTING 12L RK 3/ SWIVEL ELBOW FITTING 12L ELBOW FITTING RK 3/ BY-PASS PIPE, COMPLETE D ELBOW FITTING 10L RK 3/ ELBOW FITTING 10L RK 1/ PRESSURE GAUGE, COMPLETE ELBOW FITTING NPT1/4 -RK3/8 1
6 6 UNLOADER VALVE ASSEMBLY WITH FLOW INDICATOR (E) B 2.8 UNLOADER VALVE T P S HPW WATER RESERVOIR 2. UNLOADER VALVE ASSEMBLY CODE V UNLOADER VALVE DST-261-E PLUG, SOCKET HEAD RK1/ BY-PASS PIPE E, COMPLETE D ELBOW FITTING 10L-R1/4 1
7 7 TECHNICAL CHARACTERISTICS PARAMETERS HPW 200/30-45 WATER POWER WATER FLOW max l/min 30 WATER PRESSURE max bar 200 WATER TEMPERATURE max ºC 70 ºC PUMPING POWER max kw 10 SUCTION HEAD max m 3 WATER FEED PRESSURE min-max bar -0, PRESSURE RATIO water/hydraulic 1,18 SPEED RATIO 1/min 750 WATER PISTONS outer diameter mm D 30 WATER CONNECTIONS PRESSURE LINE BSP 3/8 SUCTION / FEED LINE min BSP 3/4 PRESSURE HOSE recommendation 3/8 SUCTION HOSE recommendation 3/4 WATER FILTER min. mesh 80 HYDRAULIC CONNECTIONS PRESSURE LINE P BSP 1/2 RETURN LINE T BSP 1/2 SERVICE LINE S BSP 1/4 HYDRAULIC FLUID REQUIREMENTS VISCOSITY cst / optimal TEMPERATURE ºC max. 70 FILTER RATIO recommendation um min. 25 COOLING CAPACITY recommendation kw 2 HYDRAULIC POWER REQUIREMENTS HYDRAULIC FLUID FLOW l/min 45 OPERATING PRESSURE Δp bar 185 MAXIMUM PRESSURE bar 210 IDLE RUN PRESSURE bar 10 RETURN LINE PRESSURE max bar 210 WEIGHT kg 8 PRESSURE GAUGE OPTIONAL WATER PRESSURE UNLOADER ST OPTIONAL LS-VALVE LS OPTIONAL PRESSURE RECUDER /FLOW LIMITER- P/T BLOCK VR-PA-LS OPTIONAL
SPECIFICATIONS AND OUTLINE DIMENSIONS
1 Dynaset HPW pump gives great water power with small amount of water in relation to its size. As self-priming it is productive even in hard environment. Small size, light weight, durable construction
More informationOUTLINE DIMENSIONS HIGH PRESSURE PUMP HDF 40/40-8 1/6. High pressure pump HDF 40/40-8. HYDRAULIC FLOW l/min, max. 10. HYDRAULIC PRESSURE bar, max.
1/6 HIGH PRESSURE PUMP HDF 40/40-8 OUTLINE DIMENSIONS HYDRAULIC FLOW l/min, max. 10 HYDRAULIC PRESSURE bar, max. 220 WATER DISCHARGE l/min, max. 40 WATER PRESSURE bar, max 40 3 4 WEIGHT kg 8 315 P T 1
More informationSeptember 2012 JLe HIGH PRESSURE PUMP HPW 1600/ (LS)
1 HIGH PRESSURE PUMP HPW 1600/15-140 September 2012 JLe OUTLINE DIMENSIONS WP P T S 1 3 S 150 Ø 8.0 30 90 155 405 155 195 5 30 40 M 10 4 pcs. HYDRAULIC FLOW l/min, max. 140 FLUID CONNECTIONS HYDRAULIC
More informationSPECIFICATIONS AND OUTLINE DIMENSIONS
/7 May 05 JAS Dynaset HPW pump gives great waterpower with the best power to weight ratio in the World. Small size, lightweight, outstanding durable construction with ingenious piston-to-piston action
More informationOUTLINE DIMENSIONS HIGH PRESSURE PUMP HPW 220/50-70 HIGH PRESSURE PUMP HPW 220/50-70-PA
1/6 February 2014 JLe OUTLINE DIMENION Dynaset HPW pump gives great water power with small amount of water in relation to its size. As self-priming it is productive even in hard environment. mall size,
More informationMODEL DIMENSIONS, mm WEIGHT OIL FILL L W H A B C D E kg l HK 450/ x ,9
1 Dynaset HK hydraulic compressor gives high quality, efficient compressed air to different kinds of applications; pneumatic tools, air flushing, tire filling, cleaning, etc. Compact hydraulic air compressor
More informationMODEL DIMENSIONS, mm WEIGHT OIL FILL L W H A B C D E kg l HK 450/ x ,9
1 Dynaset HK hydraulic compressor gives high quality, efficient compressed air to different kinds of applications; pneumatic tools, air flushing, tire filling, cleaning, etc. Compact hydraulic air compressor
More informationHVB HYDRAULIC VIBRA PUMPS
1 HV HYDRULIC VIR PUMPS Dynaset HV Vibra Pump improves significantly standard bucket vibration and soil penetration. This value-added feature reduces working time and saves machinery expenses. HV350/ 9-40
More informationOUTLINE DIMENSIONS Ø D C A L B W HYDRAULIC- AND COMPRESSED AIR PORTS. December 2012 HKL HYDRAULIC COMPRESSORS HKL 4100/8-113-O-PE
December 0 HKL 00/--O-PE OUTLINE DIMENSIONS H B W A L Ø D C MODEL DIMENSIONS, mm WEIGHT OIL FILL L W H A B C D kg l HKL 00/ - 0 0 0 0 0 HYDRAULIC- AND COMPRESSED AIR PORTS AP P T MODEL HYDRAULIC PORTS
More informationDATA SHEET HYDRAULIC DRILLING FLUID PUMP HDF 180 /23-35 HDF 200 /40-55 HDF 200 / HDF 40 /40-8 HDF 90 / HDF 160 / rev 1.
rev 1.0 HYDRAULIC DRILLING FLUID PUMP HDF 40 /40-8 HDF 90 /150-85 HDF 160 /70-90 HDF 180 /23-35 HDF 200 /40-55 HDF 200 /250-280 HYDRAULIC DRILLING FLUID PUMP DYNASET HDF hydraulic drilling fluid pump transforms
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
More informationFILLING AND CHECK VALVE
Filling valves characteristics Size Max. Flow (l/min.) R-114 DN-32 160 Max. Press. Opening ratio 3.6:1 Decompr. ratio Min pilot pressure Max pilot pressure Min. suction opening pressure Pilot volume (cm
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW) 205 PERFORMANCE CURVE
More informationSpare parts for SMC & TSMC 108 Mk3 Type S-L and E
00.0 Spare parts for 04-06- & T Mk3 Type S-L and E Relevant drawings for compressor 00 Mk 3, S-L-E (delivered after 89.0) Cylinder liner ect. - T 04, 06, Mk 3 (after 89.0) 00 Mk 3 Cylinder liner ect. -
More informationHP3V SERIES. Swash-plate Type Axial Piston Variable Displacement Pump
1 /32 HP3V SERIES Swash-plate Type Axial Piston Variable Displacement Pump Hengli swash-plate axial piston pump HP3V, the key parts of the pump are made of imported materials, quality strictly controlled,
More information2.4 HEAVY DUTY SERIES
2 2.4 HEAVY DUTY SERIES CONTENTS PPV102 Ordering Code 2.4.1 Heavy Duty Series 2.4.2 Heavy Duty Series compensator 2.4.3 Standard gear pump models Technical Information 2.4.4 Specifications 2.4.5 Hydraulic
More informationCVM. EBARA PUMPS EUROPE S.p.A. MULTISTAGE CENTRIFUGAL PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 kw) 203 PERFORMANCE CURVE A (FROM 0.75 kw UP TO 1.1 kw) 204 PERFORMANCE CURVE
More informationTruck Hydraulics Auxiliary valves. Technical Information Ordering information and Drawings...60
Index Auxiliary Valves Bypass Valves and Unloading Valves for F1, F2, T1 and VP1 pumps Contents Page BPV-F1 and BPV-T1 bypass...59...59 Ordering information and Drawings...60 BPV-F1 and BPV-T1 Bypass without
More informationSpare Parts Manual. Single Screw Extruder BASF. Spare Parts Manual BASF rev
Spare Parts Manual Single Screw Extruder BASF Spare Parts Manual BASF rev 09--08 Contents Screw Elements... Barrel assemblies...8 Clamps... Barrel end section... 5 Cutter...5 6 Shaft...9 7 Control Arm...
More informationModel KD 710 KD 712 KD 714 Spare Parts List
Model KD 710 KD 712 KD 714 Spare Parts List Part No. KD1570063 From Serial No. CONTENTS Page No.. Contents... 2 Ordering Replacement parts... 3 Axle & Wheel... 4 Auger & Transmission... 6 2 Speed Gearbox...
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 FITTINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 25/08 204 PERFORMANCE CURVE 25/15 205 PERFORMANCE CURVE 25/25 206
More informationRV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
14 201/118 ED RV1P VARIABLE DISPLACEMENT VANE PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS (measured with mineral oil with viscosity of 46 cst at 40 C) RV1P are variable displacement vane pumps with
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW)
More informationLPE4. OptiLine. Product Description. Max differential pressure: 16 bar LPE GB
LPE4 OptiLine Product Description Flow volume: 8-175 l/min Max differential pressure: 16 bar Applications: Circulation and transfer 1. Applications 1.1 Functionality The LPE OptiLine pump is used for a
More informationTruck Hydraulics. Serie VP1 Variable Displacement Pumps
ruck Hydraulics Variable Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Pump and line
More information2.3 MEDIUM HEAVY DUTY SERIES
2 2.3 MEDIUM HEAVY DUTY SERIES CONTENTS PPV11 Ordering Code 2.3.1 Medium Heavy Duty Series 2.3.2 Torque limiter settings Technical Information 2.3.3 Specifications 2.3.4 Hydraulic fluids 2.3.5 Viscosity
More informationUnit Identification Diagram
10 Rapid Spray Marshal Unit Operator s Handbook Unit Identification Diagram Rapid Spray Marshal Unit Operator s Handbook 11 Unit Specifications Engine Pump MODEL GX35 Honda 4-Stroke Rapid Commando TYPE
More informationFiltrec elements are tested according to ISO 2941, ISO 2942 and ISO 23181
Common HYDRAULIC FILTRATION Side wall mounting suction filters Technical Information Connection Ports: 1-1 1/4-1 1/2 BSP (other thread options on request) 1 1/2 SAE J518-3000/M12 Housing Materials: Cover:
More informationLB361B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools
COMPRESSORS CB-5E-031 2011/06 LB361B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 793099 Top End Repair Kit 793229 Includes Piston Rings & Expanders, Packing
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
More informationGENERAL PUMPA member of the Interpump Group
FEATURES Innovative drive design eliminates need for auxiliary hydraulic drive HWB Series Hydraulic Drive - Triplex Plunger Pump HWB2512 & HWB2112 Forged brass manifold No scheduled maintenance required
More informationACF5. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer ACF GB
ACF5 Std Line Product Description Flow volume: 310-2900 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The ACF pumps are used
More informationBASIC CONSTRUCTION AND FUNCTION The basic DYNASET FLOW LIMITER corresponds to the glow limiting cartridge valve, which can be fitted into different co
VR 50 VR 95 VRD 80 DYNASET VR FLOW LIMITERS ARE ESPECIALLY DESIGNED TO ACHIEVE RELIABLE HYDRAULIC FLUID FLOW CONTROL IN ORDER TO KEEP FLOW CONSTANT, ENSURING PROPER OPERATION OF DYNASET HYDRAULIC GENERATOR.
More informationAxial piston variable displacement pump type V60N, Serie 03
Axial piston variable displacement pump type V60N, Serie 03 mainly for mobile applications, commercial trucks etc. Open circuit Nominal pressure Maximum pressure p max Geometric displacement V max = 350
More informationHydraulic Pump VP1-120
REECHSROY GROUP REECHNOLOGY Bulgaria, Varna 9000 Industrial Zone Str. Studentska 1 U/UK1 odernization, complex repair and maintenance of heavy industrial equipment. Infrastructure construction and management
More informationMULTIGO. EBARA Pumps Europe S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 40 203 PERFORMANCE CURVES 80 204 - CONSTRUCTIONS SECTIONAL VIEW
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi 1 l...0,264 US
More informationACD6. Std Line. Product Description. Max differential pressure: 7 bar Circulation, lubrication and transfer ACD GB
ACD6 Std Line Product Description Flow volume: 10-42 l/min Max differential pressure: 7 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The ACD pumps come in two
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
More informationVariable Displacement Pumps
variable displacement pumps variable displacement pumps Variable Displacement Pump Prices Seal Kits Prices Application & Features A10VSO Pumps Dimensions Technical Information Sec:2 Sec:2 Sec:3 Sec:4 Sec:8
More informationLMP series
Low & Medium Pressure fi lters LMP 95-95-95 series Maximum working pressure up to.5 MPa (5 bar) - Flow rate up to 000 l/min 7 Low & Medium Pressure filters Introduction FILTER SIZG DEX CALCULATION CORRECTIVE
More informationFlow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer
Screw pump Series LPD Product description Flow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer The LPD pump is used for a number of different fluids:
More informationRPEW4-06. Functional Description HA /2005. Solenoid Operated Directional Control Valves with Wirebox 1/2 NPT 1/2 NPT. Replaces HA /2004
Solenoid Operated Directional Control Valves with Wirebox RPEW4-06 2/2005 Size 06 p max up to 320 bar Q max up to 80 L/min Replaces 2/2004 4/3, 4/2 way directional control valves Four-land spool - reduced
More informationLPE3. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer LPE GB
LPE3 Std Line Product Description Flow volume: 10-180 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The Std Line (standard)
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.50 203 PERFORMANCE CURVE 0.80 204 PERFORMANCE CURVE 1.00 205 PERFORMANCE
More informationA member of the Interpump Group
FEATURES Nickel-plated cast manifold manufactured like heavy-duty pump line Triplex Plunger Pump, Gas New generation seal package New dust protection chamber TRIPLEX TRIPLEX Solid ceramic plungers New
More informationDirectional Control Valve Series 4D01 (DENISON)
Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi 1 l...0,264 US
More informationACF5. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer
ACF5 Std Line Product Description Flow volume: 310-2900 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer ALSO VALID FOR PUMP SERIES UCF Generation 5 1. Applications
More informationVM / VML COMPONENT PARTS CATALOGUE
VM / VML REFRIGERATION COMPRESSOR COMPONENT PARTS CATALOGUE Ver. 2002 HASEGAWA CONTENTS Model VM / VML Compressor Description Parts # Crankcase Component Parts External Casing Fittings Covers & Gaskets
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 LPC4 32 205 LPC4 40 206 LPC4 50 211 LPC4 65 215 LPC4 80 219 LPC4 100 222 LPC4 125 225 LPC4 150 226 - CONSTRUCTIONS
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 QUANTITY FOR MODEL 303 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATION 202 PERFORMANCE CURVE 40/86 203 PERFORMANCE CURVE 40/106 204 PERFORMANCE CURVE 40/126 205 PERFORMANCE CURVE 40/156
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 CONSTRUCTIONS 301 CONSTRUCTIONS 302 MECHANICAL SEAL 303 COUNTERFLANGE 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 3-4-5-6 impellers ) 204 PERFORMANCE CURVE 3 ( 7-8-9 impellers ) 205
More informationRF2 Maximum pressure 20 bar F l o w r a t e s t o l / m i n
RF2 96 Maximum pressure 20 bar F l o w r a t e s t o 4 5 5 l / m i n Filter housing (Materials) Filter body: luminium over: Nylon Valve: Nylon - Steel nti-emptying valve: Steel Pressure Working pressure:
More informationSpare parts manual. HPO Reciprocating compressor unit
Spare parts manual en HPO 24-26-28 Reciprocating compressor unit Manual for HPO 24-26-28 Compressor type 24 26 28 Compressor no. Refrigerant R717 R410A R744 Other Control Unisab III None Other Water-cooled
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.75 203 PERFORMANCE CURVE 1.00 204 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
More informationNo: En Revision Parts List. MAJOR MSHA A_8103_8104_081_expl_view
No: 882089 En Revision 2.0 202.0 Parts List MAJOR MSHA 80.08 www.grindex.com 2 3 5 6 7 8 9 0 7 8 9 2 3 5 6 2 3 5 6 7 8 9 50 5 52 53 20 2 22 23 2 25 26 27 28 29 30 5 55 56 57 58 59 60 6 62 63 500 3 32 33
More information3.3 VARIABLE DISPLACEMENT MECHANICAL COMPENSATION
. VRIBL ISPLMNT MHNIL OMPNSTION ONTNTS PVV101 Ordering ode..1 Mechanical compensation Technical Information..2 Specifications.. Hydraulic fluids..4 Viscosity range..5 Temperature range..6 Seals..7 Filtration..8
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 THERMAL INSULATION DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationHydraulic Pump Series VP1 Variable Displacement
Variable Displacement Catalog 9129 8222-02 February 1999, GB Content Page General information 3 Design 3 Specifications 4 Ordering information 4 VP1 cross section 4 Installation dimensions 5 Line dimensioning
More informationInfinity i-star 13 Flow: 13 m3/h - 6 m.w.c. A Infinity i-star 17 Flow: 17 m3/h - 6 m.w.c. A
PUMPS & BLOWERS 2011 PUMPS & BLOWERS PUMPS Series I - STAR Self priming centrifugal pumps for swimming pool with prefilter Quiet operation Prefilter with specially constructed clear lid with ring lock
More information- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX DIMENSION TABLE MATRIX PACKING 403
CONTENTS Page - SPECIFICATIONS 200-201 SELECTION CHART 202 SELECTION CHART TABLE 203 TYPE KEY AND CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 3 ( 2-3-4-5 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 6-7-8-9 IMPELLERS
More informationMMD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
More informationLMP series. 305 Low & Medium Pressure filters MULTIPORT. Maximum pressure up to 80 bar - Flow rate up to 200 l/min
Low & Medium Pressure fi lters LMP - series Maximum pressure up to 8 bar - Flow rate up to l/min 5 Low & Medium Pressure filters FILTER SIZING The correct filter sizing have to be based on the variable
More informationSpare parts manual. HPC 100 Mk4 Reciprocating compressor unit
Spare parts manual en HPC 100 Mk4 Reciprocating compressor unit Spare parts manual for HPC Mk4 The reciprocating compressor and the unit may be fitted with different equipment, depending on their functions
More informationPVD /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE
14 100/117 ED PVD VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with mechanical pressure compensator. The pressure
More informationLB601B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools
COMPRESSORS CB-5E-051 2011/06 LB601B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 794099 Top End Repair Kit 794237 Includes Piston Rings & Expanders, Packing
More informationMMD 4 Poles. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE MMD4 32-250 205 PERFORMANCE CURVE MMD4 40-250 206 PERFORMANCE CURVE MMD4 50-250 207 PERFORMANCE
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
More informationMiniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
More informationUmschaltventile DF20/3. mit Hebel Bestellnr. Typ Code
Umschaltventile DF/3 Bestellnr. Typ Code mit Hebel 4-- DF/3AL 64 4-- DF/3A7L 6744 4-- DF/3A7SLP 64 4-- DF/3AT7SLP 64 4-- DF/3BC7CB 674 4-- DF/3AC7CA-TAP(A) 64 4--3 DF/3B7MEIA-TAP(B) 648 4--4 DF/3AMB 6
More informationSpare parts manual. HPC100Mk4LL Reciprocating compressor unit
Spare parts manual en HPC100Mk4LL Reciprocating compressor unit Manual for HPC 100 Mk 4 LL Manual for HPC 100 Mk 4 LL Compressor type HPC 104 106 108 Compressor no. Refrigerant R717 R410A R744 Other Control
More informationType KKP. Combination pumps
Features Compact and light Integrated low-pressure unloading valve and fail safe valve (not suitable for continuons rating) Can be started in maximum pressure mode Self-priming Direct installation of motor
More informationSpare parts manual. HPX700Mk5 Reciprocating compressor unit
Spare parts manual 700Mk5 Reciprocating compressor unit Manual for Mk 5 Manual for Mk 5 Compressor type 704 706 708 72 76 Compressor no. Refrigerant R77 R744 Other Control Unisab III None Other Water-cooled
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
More informationScrewpump. Series D GB. General Description. Model Code D 4
Screwpump Series D4 A Member of the COLFAX PUMP GROUP Handling of hydraulic oils, seal oils and fuel oils Max. working pressure: 160 bar Flow range: 10-850 I/min General Description Positive constant displacement,
More informationTXV - Characteristics
TXV - Characteristics TXV pumps are available in 11 models from to 150 cc/rev maximum displacement. Pump reference Direction of rotation Maximum displac. (1) Max. operating pressure Max. peak pressure
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More information3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow A-VRFC3C-VEI-VS-LS 0M.43.21.80 - Y - Z RE 18309-63 Edition: 03.2018 Replaces: 03.2016 Technical
More informationPage - DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX 5/10/ PUMP TABLE MATRIX 5/10/ PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 2-3 IMPELLERS ) 204 PERFORMANCE CURVE 3 ( 4-5-6 IMPELLERS )
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE AGA 0.60 203 PERFORMANCE CURVE AGA 0.75 204 PERFORMANCE CURVE AGA 1.00
More informationTruck Hydraulics. Series F1, F2, T1 Fixed Displacement Pumps
Series F1, F2, T1 Fixed Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Hydraulic Pumps,
More informationRSP 7-06 R S P FUNCTIONAL DESCRIPTION ORDERING CODE. DIRECTIONAL CONTROL VALVES KE /13 D n 06 p max 32 MPa Q max 80 dm 3 /min
DIRECTIONAL CONTROL VALVES KE 2053 07/13 D n 06 p max 32 MPa Q max 80 dm 3 /min Manually operated directional control valves of type RSP7 06 operated by hand lever are used to control start, stop and direction
More informationACG7. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer ACG GB
ACG7 Std Line Product Description Flow volume: 80-1200 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The Std Line (standard)
More informationXS VALVES WITH UM ELECTRIC ACTUATOR
780-781XS VALVES WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 780XS+UM L-port and 781 XS+UM T-port stainless steel 3-way ball valves are dedicated to the mixing, diverting or automatic discharging of
More informationHYDRAULIC BREAKER HAMMER HB 50 J HAMMER HB 50 L HAMMER HB 50 U
PARTS MANUAL ver. 1.1 PMHB50ENG.051011 HYDRAULIC BREAKER HB 50 J HB 50 L HB 50 U Serial No. TRK500005-UP TRK510005-UP TRK520005-UP TABLE OF CONTENTS 1. Housing unit 50J... 4 2. Housing unit 50L... 6 3.
More informationStainless Steel Pressure Filters
Stainless Steel Pressure Filters Inline Filters up to 26,000 PSIG up to 35 GPM Description Process Filtration MPSSF / HPSSF/ ACSSF Series The pressure filters consist of two main sections: the filter head
More information4.2 FIXED DISPLACEMENT DOUBLE PUMP
4.2 FIXED DISPLACEMENT DOUBLE PUMP CONTENTS PVF101 Ordering Code 4.2.1 Fixed Displacement Technical Information 4.2.2 Specifications 4.2.3 Hydraulic fluids 4.2.4 Viscosity range 4.2.5 Temperature range
More informationTank top return-line filter Pi 5000
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Tank top return-line filter Pi 5000 Nominal size 160 up to 1000 according to DIN 24550 1. Features
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.75 203 PERFORMANCE CURVE 1.00 204 PERFORMANCE CURVE 1.50 205 PERFORMANCE
More information:1 3:1 5:1 3:1 3:1 5:1 3:1 3:1 5:
trolley for drums 30-60 kg kit for drums 30-60 kg 35260 35250 37500 35249 35259 37499 35264 35254 37504 3:1 3:1 5:1 3:1 3:1 5:1 3:1 3:1 5:1 20 14 18 20 14 18 20 14 18 35076 35173 36073 35076 35173 36073
More informationInstallation and Startup Manual Hydraulic Pumps Series VP1-095 /-110/ -130
Visit our homepage for additional support parker.com/pmde Installation and Startup Manual Hydraulic Pumps Series VP1-095 /-110/ -130 Effective: May 01, 2015 Supersedes: January 01, 2013 Important installation
More informationVSK. Functional Description HA /2008. Constant Flow - Control Valves VSK4 VSK2 VSK2 VSK4. Replaces HA /2000
Constant Flow - Control Valves VSK HA 5 5/008 Size 06 p max up to 0 bar Q max up to 0 L/min Replaces HA 5 /000 Wide range of throttling oriffices VSK4 Two models: - cartridge - screw-in cartridge valve
More informationTriplex Plunger Pump, Total Start-Stop Feature
GENERAL PUMP A member of the Interpump Group ET Series FEATURES Total start-stop feature allows flow to activate electric motor Built-in unloader Triplex Plunger Pump, TRIPLEX TRIPLEX Nickel-plated cast
More informationPILOT OPERATED PRESSURE REDUCING VALVES PRV47 (Steel) PRV47I (St.Steel)
PILOT OPERATED PRESSURE REDUCING VALVES PRV47 (Steel) PRV47I (St.Steel) DESCRIPTION The PRV47 pilot operated pressure reducing valves are designed for use on steam, compressed air, nitrogen and other gases
More informationAAG-2000 Manual Air Assisted Airless Spray Gun
AAG-2000 Manual Air Assisted Airless Spray Gun 240 Bar MWP accepts TRI-A reversible kit 2 finger trigger fluid inlet filter included CE marked 1/4 BSP air & fluid connection AAG-2000 illustrated with TRI-A
More information