AAG-2000 Manual Air Assisted Airless Spray Gun

Size: px
Start display at page:

Download "AAG-2000 Manual Air Assisted Airless Spray Gun"

Transcription

1 AAG-2000 Manual Air Assisted Airless Spray Gun 240 Bar MWP accepts TRI-A reversible kit 2 finger trigger fluid inlet filter included CE marked 1/4 BSP air & fluid connection AAG-2000 illustrated with TRI-A system AAG-2000 Models TYPE REF DESCRIPTION AAG-2000 AAG-2000 manual air assisted airless spray gun 240 Bar MWP 1/4 BSP male air & fluid connection, complete with disc tip housing & screen (excl spray tip) supplied with standard air cap - order TRI-A separately if required. Spare parts for AAG-2000 spray guns TYPE REF DESCRIPTION TYPE REF DESCRIPTION Air cap retaining ring Fan regulator A Air cap retaining ring TRI-A Valve cap Air cap (standard) Spring /15 AG mixair tip (state size) Air valve Tip gasket Packing nut O ring Valve packing Air diffuser Fluid gasket Needle seat Fluid connector /2000 Needle seat Fluid tube /2000 Needle /2000 Bush 36-XXX-K10 Disc tip filter (Pack 10) (See page 19 for choice of screens) /2000 Valve shaft Trigger Nut (x2) Air inlet connection Washer (x2) Disc tip filter housing Trigger pin

2 Air Assisted Airless Spray Tips, Seals & Caps /30 Mixair Tip AK (Kremlin pattern) groove type * /11 Mixair Tip AK (Kremlin pattern) pin type * K10 Micro Tip Filter 100 mesh for AK tips (pack 10) * K10 Micro Tip Filter 100 mesh for flat tips c/w seal (pack 10) * /11 Mixair Tip AL (Larius pattern) Pin type * /30 Mixair tip AL (Larius pattern) Groove type * /15 Mixair Tip AG (Graco pattern) GGW fits HS200 * Mixair Tip AG (Graco pattern) GG4 fits Alpha 5 * /19 Seal AG tip * /30 Mixair Tip AB (Binks pattern) Vantage * /11 Mixair Tip AS (Sagola pattern) Speeflo * /18 O Ring PTFE 3.5 x 2 AK, AL /18 O Ring PTFE seal AS tips /19 Mixair Tip RE Black plastic (Excl seal) * Seal RE Pattern Tip Black plastic /020 Mixair Tip AW (Wagner B pattern) Black plastic * /30 Mixair Tip AO (Opco Böllhoff Pattern) 15mm * /30 Mixair Tip AD (DeVilbiss Optima wiwa) 9.5mm * TRI-A Ball tip TRI-A /30 Mixair tip DT (Dete Krautzberger pattern) * Please refer to Page 49 for full TRI-A reversible air assisted airless system details & discounts Air Caps EBX-3 Air Cap For AK pin type Mixair tips * EBX-8 Air Cap For AK pin type Mixair tips *

3 Reference Charts EQUIVALENT KREMLIN / EXITFLEX cm 13cm 18cm 23cm 28cm 33cm 38cm 43cm 48cm 53cm /03 03/05 03/07 03/09 03/11 03/13 03/15 03/17 03/19 03/ /03 04/05 04/07 04/09 04/11 04/13 04/15 04/17 04/19 04/ /03 06/05 06/07 06/09 06/11 06/13 06/15 06/17 06/19 06/ /03 09/05 09/07 09/09 09/11 09/13 09/15 09/17 09/19 09/ /03 12/05 12/07 12/09 12/11 12/13 12/15 12/17 12/19 12/ /03 14/05 14/07 14/09 14/11 14/13 14/15 14/17 14/19 14/ /03 20/05 20/07 20/09 20/11 20/13 20/15 20/17 20/19 20/ /03 30/05 30/07 30/09 30/11 30/13 30/15 30/17 30/19 30/ /03 45/05 45/07 45/09 45/11 45/13 45/15 45/17 45/19 45/ /03 60/05 60/07 60/09 60/11 60/13 60/15 60/17 60/19 60/ /03 68/05 68/07 68/09 68/11 68/13 68/15 68/17 68/19 68/ /03 100/05 100/07 100/09 100/11 100/13 100/15 100/17 100/19 100/21 Use references above with suffix 3 for /11 Pin type & suffix 6 for /30 Groove type AK tips i.e /30 14/096 EQUIVALENT DELAVAN / EXITFLEX cm 13cm 18cm 23cm 28cm 33cm 38cm 43cm 48cm 53cm A2/715 A3/725 A4/735 A5/ B2/915 B3/925 B4/940 B5/950 B6/ C2/1115 C3/1125 C4/1140 C5/1150 C6/ D2/1315 D3/1325 D4/1340 D5/1350 D6/1365 D7/1380 D8/ E2/1515 E3/1525 E4/1540 E5/1550 E6/1565 E7/1580 E8/ F2/1615 F3/1625 F4/1640 F5/1650 F6/1665 F7/1673 F8/1680 F9/ G2/1825 G3/1840 G4/1850 G5/1865 G6/1880 G7/ H2/2025 H3/2040 H4/2050 H5/2060 H6/2065 H7/2080 H8/ J2/2125 J3/2140 J4/2150 J5/2165 J6/2180 J7/ K2/2425 K3/2440 K4/2450 K5/2465 K6/2473 K7/ L2/2625 L3/2640 L4/2650 L5/2665 L6/ M2/2925 M3/2940 M4/2950 M5/2965 M6/2973 M7/ N2/3140 N3/1350 N4/3165 N5/ P2/3640 P3/3650 P4/3665 P5/ R3/4340 R4/4350 R5/4365 R6/ S2/ T2/5240 T3/ V3/6240 V4/ W2/ W3/8565

4 TRI-A Adaptor kits TYPE REF DESCRIPTION TRI-A AIR CAP BASE For both standard and SF TRI-A SWIVEL SEAL ASSEMBLY For both standard and SF TRI-A STANDARD SPRAY TIP KEY TRI-A SF SPRAY TIP KEY TRI-A TWIN TIP KEY The following adaptor kits allow the TRI-A reversible tip assembly to be fitted to various manufacturer s spray guns. TYPE REF DESCRIPTION /0 SEAL FOR KREMLIN GUN This seal enables the fitting of a reversible TRI-A to the standard KREMLIN MX range /14 ADAPTOR RING FOR AAG-2000 GUN & GRACO GUN This adaptor ring allows the reversible TRI-A to be fitted directly onto the Exitflex AAG-2000 & GRACO ALPHA PLUS spray guns /0 TRI-A KIT ASSY FOR GRACO ALPHA GUNS /30 PRE-ADAPTOR HEAD FOR B.F OPTIMA GUN Pre-adaptor head complete with seals, ring and spanner This kit comprises all components required to upgrade a standard Optima spray gun to accept the TRI-A reversible head /0 TRI-A TWIN TIP KIT TO FIT KREMLIN AND SEIWA SPRAY GUNS Comprises Aircap and Tip Seal

5 TRI-A Auto 140 Bar MWP (2000psi) accepts TRI-A reversible kit 1/4 BSP fluid connection CE marked TRI-A Spray Gun Models TYPE REF DESCRIPTION AUTOMATIC TRI-A AIR ASSISTED AIRLESS SPRAY GUN 140 Bar MWP (2000psi). Includes a mounting base with air and fluid fittings and connections. Compact and durable. Teflon packings and stainless steel fluid passages. Accepts TRI-A reversible nozzle system (not included as standard) The TRI-A air assisted airless spray gun in association with the TRI-A reversable spray tip system is suitable for use in demanding industrial applications. The features of the gun and air cap/nozzle combination provide many benefits to the user; reduced down-time due to reversible cleaning nozzles and ease of servicing, compact, durable anodised body, superb atomisation and fan control. TwinTips also available giving 2 angles back-to-back from 1 tip key. Pos. Ref Description Head Needle Packing Kit Air Valve Kit Body Fluid Inlet Connection Body Air Inlet Base Control Air Piston Assembly Piston Spring Cylinder Cap Needle Spring Needle Adjuster Assembly Pos. Ref Description Air Cap Separation Gasket Repair Kit Comprising: 3 x O Rings ref 3b) 1 x O Ring (ref 11a) 1 x O Ring (ref 11b) 1 x Piston Spring (83-612) 1 x Needle Spring (83-614) 6 x O Rings (ref 10a) 1 x Air Cap Separation Gasket (83-403)

6 TRI-A Air Assisted Airless Spray Gun reversible AAA 140 Bar MWP 2 finger trigger CE marked disc tip filter built into fluid tube 1/4 BSP fluid inlet connection 1/4 BSP air inlet connection manual & automatic guns TRI-A illustrated with reversible aircap & tip TRI-A Spray Gun Models TYPE REF DESCRIPTION MANUAL TRI-A AIR ASSISTED AIRLESS SPRAY GUN 140 Bar MWP (2000psi). Two air chambers, MWP 140 Bar. 1/4 BSP air & fluid inlets. Colour blue. (excludes air cap & tip) Spare parts for TRI-A manual spray guns (83-001) TYPE REF DESCRIPTION TYPE REF DESCRIPTION Aircap retaining ring Air valve plug Friction ring (PTFE) Air valve spring TRI-A air cap base Air valve packing TRI-A swiveling seal assembly Air valve opening bar /23 K10 Nylon gasket for (pk10) O ring (green viton) TRI-A ball tip & seal kit(state size) Air valve body TRI-A ball tip (state size) Air/needle valve needle packing Air cap separation gasket Flat washer 3x7x0.5 zinc plated Body / nozzle holder Air valve packing spring PTFE packing Air valve packing nut Needle packing set (complete) Trigger lock lever and screw Packing nut Air inlet connection 1/4 BSP male Head cone gasket Air control valve (complete) Trigger pin screw Trigger Fluid needle (complete) Filter housing (without filter) Fan control adjuster (complete) K10 Disc tip filter (pack 10) See page O ring (green viton) Fluid inlet connection 1/4 NPS Fluid needle spring K10 Nylon cleaning brush (pack 10) Base for fluid needle spring Seals & springs kit (pos.2,6,9,12,23, Fluid control adjusting valve 25,29,30,32,34,35,36) Dismantling wrench For TRI-A Aircaps and Tips, see pages 67.

7 Airless Spray Tips & Accessories TYPE REF DESCRIPTION Titan Variable Spray Tips 341-0XX Titan Variable Tip All sizes, 15, 20, 24, 28, 41, 49 * 341-3XX Spare needle for Titan Tip All sizes /0 Tip Guard for Titan variable tip Fits Graco /0 Tip Guard for Titan variable tip Fits DeVilbiss /0 Tip Guard for Titan variable tip Fits Binks /0 Tip Guard for Titan variable tip Fits Wagner Tip Cleaning Needles /00 (Silver) (Box 12x12) 08/110gm for tips up to.011 th orifice /00 (Purple) (Box 12x12) 10/110gm for tips over.011 th orifice Pre-Orifice Discs /0 Pre Orifice Yellow /0 Pre Orifice Red /0 Pre Orifice Blue /0 Pre Orifice Black /0 Mix air Pre Orifice Colour Code All airless and air assist tips listed below are genuine ExitFlex products Airless Spray Tips Note : This section covers standard airless tips. Reversible systems are featured on following pages /30 Flat tip Industrial Grade Stainless body * /35 Flat Tip Superfine Finishing * /4 Line Marking Tip Flat tip type body * /0 Insert Tip ** (Blastaway ) /0 Insert Tip ** (Turnaflo ) ** Special order only - minimum 10 per size /30 Insert tips /35 TN-SSTC-XX Round spray 31-HAF-0180 Round spray Hollow cone spray, tungsten 80 full cone spray S.S 0.5mm orifice 3.95L 3Bar (not illustrated) Drain Cleaning Nozzles / Stainless steel static pipe cleaning nozzle (3 x 1mm rear jets) / Stainless steel static pipe cleaning nozzle (3 x 1mm rear +1 x 0.7mm front jet) /18 Nylon seal for /30, /30,63-410/0 & / /0 Rotary pipe cleaning nozzle (4 x 1mm jets) TN-SSTC-XX Drain cleaning nozzles

8 Blast-A-Way MKII Speedy BASE UNITS Base unit fits 7/8 x Base unit fits 3/8 NPS Base unit fits 3/4 x Base unit fits M18 x Base unit fits M18 x Base unit fits 11/16 x 16 *SPRAY TIPS Standard tip SF Superfine tip Twin Tip SPARE PARTS Safety guard Adaptor Adaptor Adaptor Adaptor Adaptor Housing stainless Swivel seal assembly Pre-adaptor 3/8 NPS F 7/8 x 14 M Pre-adaptor 11/16x16 F 7/8 x 14 M Gasket

9 Blast-A-Way MKIV Speedy BASE UNITS SPARE PARTS Base unit fits 7/8 x Safety guard No 2 and Base unit fits 3/8 NPS Safety guard Nos 4, 5, 6, Base unit fits æ x Adaptor Base unit fits M18 x Adaptor Base unit fits M18 x Adaptor Base unit fits 11/16 x Adaptor Adaptor *SPRAY TIPS & TIP & SEAL KITS Housing stainless steel No 2 and Standard tip cylinder Housing stainless steel No 4, 5, 6, Standard tip & seal kit Seal kit SF Superfine tip cylinder Pre-adaptor 3/8 NPS F 7/8 x 14 M SF Superfine tip & seal kit Pre-adaptor 11/16x16 F 7/8 x 14 M L M Linemarking tip cylinder Gasket Twin tip IMPORTANT NOTE Speedy IV tip and seal kits are interchangeable into ASM, WAGNER & GRACO RAQ systems. The tip cylinders must be fitted with the matching seal supplied.

10 Blast-A-Way MKV Speedy BASE UNITS Base unit fits 7/8 x Base unit fits 3/8 NPS Base unit fits æ x Base unit fits M18 x Base unit fits M18 x Base unit fits 11/16 x 16 *SPRAY TIPS Standard ball tip cylinder kit SF Superfine ball tip cylinder kit L M Linemarking tip cylinder kit Twin tip SPARE PARTS Safety guard No 2 and Safety guard Nos 4, 5, 6, Adaptor Adaptor Adaptor Adaptor Adaptor Housing stainless steel No 2 and Housing stainless steel No 4, 5, 6, Seal kit Pre-adaptor 3/8 NPS F 7/8 x 14 M Pre-adaptor 11/16x16 F 7/8 x 14 M Gasket IMPORTANT NOTE Speedy V tip and seal kits are interchangeable into ASM, WAGNER & GRACO RAQ & GHD systems. The tip cylinders must be fitted with the matching seal supplied.

11 Tip Chart This chart relates to all standard range of tips Each EXITFLEX tip is carefully manufactured and individually tested for assured quality, performance and life, under demanding conditions. Sizes for Superfine tips can be found on page 9 of this brochure. They are not covered by this chart. ORIFICE SIZE SPRAY ANGLES IN DEGREES AND INCHES FLOW RATE 100Bar (1500psi) L/min GPM inch mm 2/3 4/6 6/8 8/10 10/12 12/14 14/16 16/18 18/20 20/22 22/ inch mm L/min GPM 2/3 4/6 6/8 8/10 10/12 12/14 14/16 16/18 18/20 20/22 22/24 SPRAY ANGLES IN DEGREES AND INCHES Standard range Speedy range = Standard tip spray angle for the given orifice size = Speedy tip spray angle for the given orifice size Spray angles quoted are correct but spray width depends upon viscosity, solids and pressure. Figures quoted as a guide only. Note Other sizes may be possible by special enquiry. Please enquire.

12 Pre-Treatment Nozzles MK I Adjustable Assemblies Standard Poly Glass Material to suit 1, 1 1/2 & 2 inch nominal Standard bore I.P.S. Pipe. Available with 14mm, 17mm and 19mm spigots to allow retrofitting 302 to most existing installations spring Now available with the new Quick release tips to further reduce maintenance and down time! Single Spring Version (for spraying pressures up to 4.0 Bar) MK1 assembly complete with Quick release V Tip MK1 assembly complete with V JET tip MK1 assembly complete with HOLLOW CONE tip MK1 assembly complete with THREADED BALL tip MK1 assembly complete with FULL CONE tip Double Spring Version (for spraying pressures greater than 4.0 Bar) MK1 assembly complete with Quick release V Tip MK1 assembly complete with V JET tip MK1 assembly complete with HOLLOW CONE tip MK1 assembly complete with THREADED BALL tip MK1 assembly complete with FULL CONE tip MK II Fixed Nozzle Holders Standard Poly Glass Material to suit Standard 1, 1 1/2 & 2 inch nominal bore I.P.S. Pipe. Female threaded bodies 302 1/8, 1/4, 3/8 & 1/2 BSP & NPT spring Single Spring Version 2.80MKII Single spring Double Spring Version MKII Double spring Replacement Tips to suit all Mkl nozzle holders in Polyglass material Replacement Quick release Ball and V Tip Replacement Quick release V Tip only V jet Tip Hollow Cone Tip Threaded Ball Tip Threaded Tip Full Cone Tip Not ours Not ours Spares for MKI & MKII assemblies in polyglass material O ring seal (MKI & MKII) Locking Cap (MKI) Body (MKI) Body (MKII) Single spring 302SS (MKI & MKII) Double spring 302SS (MKI & MKII) Mkl assembly less tip Single Clamp Mkl assembly less tip & locking cap Single Clamp

13 Pre-Treatment Nozzles Pre-Treatment Non Corrosive CPVC Pipework Systems Designed For Your Application

Conventional Air Atomising Spray Lances

Conventional Air Atomising Spray Lances Conventional Air Atomising Spray Lances EXITFLEX 38 Series Airspray Gun Lances do not feature needles and thus require a different technique in use. In practice, they provide a positive affordable solution

More information

Spray tips, hoses, systems and accessories Euro Price List

Spray tips, hoses, systems and accessories Euro Price List The Exitflex Group Subsidiary and Associated Companies Exitflex (UK) Ltd 5 Airfield Road, Airfield Industrial Estate Christchurch BH23 3TG United Kingdom Tel: +44 (0)1202 478334 Fax: +44 (0)1202 488110

More information

AIRLESS ASI 24 AND 40 SPRAY GUNS - STAINLESS STEEL

AIRLESS ASI 24 AND 40 SPRAY GUNS - STAINLESS STEEL AIRLESS ASI 24 AND 40 SPRAY GUNS - STAINLESS STEEL AUTOMATIC AIRLESS SPRAY GUNS High output FEATURES Equipped with 2 fluid inlets No spring in the fluid passages Large choice of tips BENEFITS Allows for

More information

Airless Spray Tips, Hoses and Accessories for the Contractor

Airless Spray Tips, Hoses and Accessories for the Contractor Airless Spray Tips, Hoses and Accessories for the Contractor Precision Tolerances Reliable Performance Constant Quality Longer Life www.exitflex.co.uk t +44 (0)1202 478334 RAT-EX Reversible Airless Tips

More information

HANDGUNS SPRAYING SYSTEMS NO. AA18-AL SPRAYING SYSTEMS NO. AA143-AL HEAVY DUTY TYPE ROTATING HANDLE CONTROL

HANDGUNS SPRAYING SYSTEMS NO. AA18-AL SPRAYING SYSTEMS NO. AA143-AL HEAVY DUTY TYPE ROTATING HANDLE CONTROL PRO SERIES SPRAYING SYSTEMS NO. AA18-AL HANDGUNS 3PT SKID HEAVY DUTY TYPE ROTATING HANDLE CONTROL Handle rotates 360 to operate spray gun valve from shutoff to maximum flow position. As handle is turned,

More information

Air Controls. Air Regulators /0 Mini gun mounted air flow regulator 1/4 BSP(F) x 1/4 BSP(M) C/w glass fronted gauge.

Air Controls. Air Regulators /0 Mini gun mounted air flow regulator 1/4 BSP(F) x 1/4 BSP(M) C/w glass fronted gauge. Air Controls Air Regulators 78-210/0 Mini gun mounted air flow regulator 1/4 BSP(F) x 1/4 BSP(M) C/w glass fronted gauge. Quick Detach Hi-Flo Air Couplings & Tails 50-401 Quick detach doubleacting coupling1/4

More information

SB-E ISS.05. Operation Manual AA4400A Automatic Air Assisted Airless Spray Gun

SB-E ISS.05. Operation Manual AA4400A Automatic Air Assisted Airless Spray Gun EN SB-E-2-740 ISS.05 Operation Manual AA4400A Automatic Air Assisted Airless Spray Gun Contents Page 1 - Specification & Materials of construction... 3 2 - SAFETY WARNINGS... 4 3 - Model part numbers...

More information

UNI-SPRAY - CLAMP-ON NOZZLE SELECTION GUIDE -

UNI-SPRAY - CLAMP-ON NOZZLE SELECTION GUIDE - UNI-SPRAY - CLAMP-ON NOZZLE SELECTION GUIDE - Uni-Spray Nozzles... are injection molded from custom blended polypropylene, a cost effective material that is corrosion and heat resistant and is impervious

More information

Available with T93R MAXX Tip & Guard

Available with T93R MAXX Tip & Guard 7500 PSI (500 BAR) Maximum Pressure Airless Gun High-strength aluminum alloy handle is light-weight, solid and strong single piece forging that features an anodized protective finish that is highly corrosive

More information

Chemical disc filters, Arkal Amiad, w w w. a r k a l - f i l t e r s. c o m

Chemical disc filters, Arkal Amiad,   w w w. a r k a l - f i l t e r s. c o m Manual Filters For Chemical Use Chemical disc filters, Arkal Amiad, www.irrigationglobal.com w w w. a r k a l - f i l t e r s. c o m Arkal ¾ Filter for Chemical Use Catalog No. 1070 1 _ Filtration Grades

More information

AY-SS Trigger Adapter AA46

AY-SS Trigger Adapter AA46 98 98 Choice of Materials Spray and Capacities Guns For spot spraying, tree spraying, livestock spraying and power washing at GunJet pressures Number from AA2Spray 30 to 800 Guns PSI. To Length operate

More information

GUNJET NUMBER AA143-AL-*-10 A C A C

GUNJET NUMBER AA143-AL-*-10 A C A C For spot spraying, tree spraying, livestock spraying and power washing at pressures from 2 to 55 bar. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,

More information

TYPE AL AIR ATOMISING D.20

TYPE AL AIR ATOMISING D.20 SPRAY CHARACTERISTICS The Delavan AL air atomising series spray nozzles offer the user a wide variety of spray patterns, flow rates and atomisation. Unlike hydraulic or pressurised nozzles where the energy

More information

Spray Guns. Choice of Materials and Capacities

Spray Guns. Choice of Materials and Capacities For spot spraying, tree spraying, livestock spraying and power washing at pressures from 30 to 800 PSI. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,

More information

HANDGUNS ADJUSTABLE TIPS ACCESSORIES FOR HANDGUNS COUPLERS FIRE HOSE NOZZLE HANDGUNS , 6-12, 6-14 HANDGUN ACCESSORIES

HANDGUNS ADJUSTABLE TIPS ACCESSORIES FOR HANDGUNS COUPLERS FIRE HOSE NOZZLE HANDGUNS , 6-12, 6-14 HANDGUN ACCESSORIES I N D E X ADJUSTABLE TIPS... 6-6 ACCESSORIES FOR... 6- COUPLERS... 6- FIRE HOSE NOZZLE... 6-... 6-, 6-2, 6-4 HANDGUN ACCESSORIES... 6- (COMPLETE WITH LANCES) Hamilton... 6-4 Hypro Lurmark... 6- Lurmark...

More information

G15/G40. Manual Air-Assisted Spray Guns designed for exceptional spray quality and ease of use PROVEN QUALITY. LEADING TECHNOLOGY.

G15/G40. Manual Air-Assisted Spray Guns designed for exceptional spray quality and ease of use PROVEN QUALITY. LEADING TECHNOLOGY. G15/G40 Manual Air-Assisted Spray Guns designed for exceptional spray quality and ease of use PROVEN QUALITY. LEADING TECHNOLOGY. Exceptional Spray Quality Maximize efficiency and quality, while reducing

More information

SPRAY CHARACTERISTICS Mist at low pressure; fog at high pressure Spray pattern: Cone-shaped Fog Flow rates: to l/min

SPRAY CHARACTERISTICS Mist at low pressure; fog at high pressure Spray pattern: Cone-shaped Fog Flow rates: to l/min MicroWhirl Fine tomization Outstanding atomization Rugged pinless design Drip-free performance 70 micron polypropylene filter Safety wire hole available Patented design Minimum operating pressure 7 Mist

More information

Available in aluminum only. SETTING C STRAIGHT STREAM SPRAY. Maximum Horizontal Throw

Available in aluminum only. SETTING C STRAIGHT STREAM SPRAY. Maximum Horizontal Throw Type 43L & 43H GunJet Spray Guns AA43 GunJet Designed and built for heavy-duty service. Stem extends through extension to valve seat located directly behind orifice disc for drip-free shutoff and instant

More information

Gun. Silver Plus. Lightweight, Rugged Design. Exclusive Needle Design. 2-Finger Trigger Design and Handle. Stainless Steel Fluid Tube

Gun. Silver Plus. Lightweight, Rugged Design. Exclusive Needle Design. 2-Finger Trigger Design and Handle. Stainless Steel Fluid Tube Silver Plus Gun The Silver Plus Airless Gun is known for its durability, long life, spraying performance and comfortable design. It is the preferred gun for high pressure applications. Lightweight, Rugged

More information

TEEJET SWIVELS & 45 NOZZLES BODIES

TEEJET SWIVELS & 45 NOZZLES BODIES TEEJET SWIVELS & 45 NOZZLES BODIES 45 QUICKJET Poly construction Self aligning tip cap Accepts standard twist lock cap, tip & screen Max 125 PSI In MPT Out 5699 1/4" Twist Lock 45 Poly construction nozzle

More information

Twist & Dry. Twist & Dry Component System SPECIAL PURPOSE. Same day shipping for wear parts! Tungsten Carbide Options

Twist & Dry. Twist & Dry Component System SPECIAL PURPOSE.   Same day shipping for wear parts! Tungsten Carbide Options Twist & Dry TO DER: specify pipe size, connection type, 108 Twist & Dry Component System The Twist & Dry series of nozzles was designed and developed for the spray drying industry, with the dryer operator

More information

Section H Spray Guns. Table of Contents

Section H Spray Guns. Table of Contents Section H Overview You re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns. Options range from a gentle spray to a high-impact solid stream.

More information

Over 75 CNC machines in our manufacturing center.

Over 75 CNC machines in our manufacturing center. TriTech Industries Inc. 610 Rahway Ave. Union, New Jersey 07083 USA 908-378-1080 Toll Free 866-387-4832 Fax 908-378-1659 on line at: www.tritechindustries.com email: support@tritechindustries.com TriTech

More information

High Pressure Paint Pumps

High Pressure Paint Pumps imum Durability, Versatility and Ease of use... Binks MX Pumps are a completely new design in pump technology utilising patented magnetic detents to dramatically enhance smooth pump operation and change-over

More information

Car Wash / Pressure Washer

Car Wash / Pressure Washer Car Wash / Pressure Washer PARTS & ACCESSORIES Proudly distributed by: We have many representatives in all 50 states. Give us a call to locate the one nearest you! Custom manufacturing available... ask

More information

FineFinish TITAN fine finishing applications

FineFinish TITAN fine finishing applications FineFinish TITAN fine finishing applications Titan offers a fine finishing sprayer for every size job from minor touch-ups to major industrial projects. All are designed to deliver maximum performance

More information

High-Pressure Airless Accessories High-Pressure Equipment for Protective Coatings

High-Pressure Airless Accessories High-Pressure Equipment for Protective Coatings High-Pressure Airless Accessories High-Pressure Equipment for Protective Coatings Genuine Graco Genuine Graco parts and accessories make the difference Get superior spray results with Graco parts Rely

More information

CJ Series Flat Spray Nozzles For Air & Saturated Steam CJ The following description will help to explain our Part Number/ Code in relation to the SPRAYTECH Spray Nozzle. EXAMPLE ORDERING. SPRAYTECH CJ

More information

Parts and Accessories

Parts and Accessories Parts and Accessories For a full list of available pressure washer parts and accessories, visit www.landa.com. 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Hypro

More information

Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560

Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560 Your One Stop Shop for Parts Hypro Roller Pumps Ideal for Farm Sprayers, Pest Control and Chemical Application Usage. Housings available in Cast Iron, Ni-Resist or Silver Series Self priming operation;

More information

Low Pressure Series - Accessories. High Pressure Series - Accessories

Low Pressure Series - Accessories. High Pressure Series - Accessories Low Pressure Series - Accessories STCO 50 Low Pressure Variable Spray Gun - Bronze Max. Pressure: 0Bar(50PSI) Inlet: /2 FBSP Max. Flow: 6GPM(23Lt/Min) 60 C(40 F) STCO 50-SS Low Pressure Variable Spray

More information

Foam Equipment & Accessories

Foam Equipment & Accessories Suttner Foam Guns & Accessories 40 Foam Lances 4 Foam / Chemical Injectors 4 Foam Injector Lances 42 Foodjet - Food Hose 42 blufood - Food Hose 42 Suttner Foam Units 43 Airless Foamer 44 Foam Equipment

More information

Operation Manual AA4400A Automatic Air Assisted Airless Spray Gun

Operation Manual AA4400A Automatic Air Assisted Airless Spray Gun SB-E-2-740 ISS.01 Operation Manual AA4400A Automatic Air Assisted Airless Spray Gun Contents Page 1 - Specification & Materials of construction... 2 2 - SAFETY WARNINGS... 3 3 - Model part numbers... 4

More information

Shaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last

Shaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last Hypro Roller Pumps Ideal for farm sprayers, pest control and chemical application usage. Housings available in cast-iron, Ni-resist or silver series Self-priming operation; roller pumps should not be run

More information

Pounds Per Square Inch (PSI)

Pounds Per Square Inch (PSI) Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be

More information

A Complete Line of Paint Spray Accessories. Accessories. The Industry's Highest Quality Accessories. Global Leader in Paint Spray Technology

A Complete Line of Paint Spray Accessories. Accessories. The Industry's Highest Quality Accessories. Global Leader in Paint Spray Technology A Complete Line of Paint Spray Accessories Accessories The Industry's Highest Quality Accessories Global Leader in Paint Spray Technology New Products Table of Contents S-3 S-7 Stainless steel fluid passages.

More information

TRANSLATION FROM THE ORIGINAL MANUAL PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.

TRANSLATION FROM THE ORIGINAL MANUAL PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE. l SPECIFICATIONS STAINLESS STEEL AIRMIX PRESSURE REGULATOR Models : 250-10 / 70 250-10 / 120 120-5 / 40 Manual : 1310 573.041.212 Date : 10/10/13 - Supersede : 21/09/10 Modif. : Update TRANSLATION FROM

More information

INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS. 143

INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS.  143 8 INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS www.charlandthermojet.com 143 T-70 SERIES INDUSTRIAL AUTOMATIC SPRAY NOZZLE GUN Ideal for many cleaning tasks in every kind of industrial

More information

AIRLESS ONCE YOU GRAB ON, YOU LL NEVER LET GO! MADE BY BINKS FOR PROVEN QUALITY & RELIABILITY SPRAY GUNS

AIRLESS ONCE YOU GRAB ON, YOU LL NEVER LET GO! MADE BY BINKS FOR PROVEN QUALITY & RELIABILITY SPRAY GUNS Quick and Easy Disassembly for Cleaning and Maintenance - Less Downtime! PIT BULL AIRLESS SPRAY GUNS SPRAY TIP SELECTION GUIDES.0" orifice.0" orifice.0" orifice.0" orifice.0" orifice.0" orifice.0" orifice.0"

More information

ACCESSORIES CATALOGUE

ACCESSORIES CATALOGUE ACCESSORIES CATALOGUE Spray technology Fluid handling Material extrusion Injection www.wiwa.com 1 WIWA ram presses and single post lifts 1.1 WIWA single and twin post ram presses WIWA holder for ram presses

More information

AA4400M AIR-Assist ( XXXXXX) II 2 G X

AA4400M AIR-Assist ( XXXXXX) II 2 G X The following instructions provide the necessary information for the proper operation and preventive maintenance of the Binks AA4400M Air-Assist Airless Spray Gun. Please read and understand all information

More information

GREEN GARDE MODEL JD9-C - HIGH PRESSURE SPRAY GUN

GREEN GARDE MODEL JD9-C - HIGH PRESSURE SPRAY GUN GREEN GARDE MODEL JD9-C - HIGH PRESSURE SPRAY GUN Guns Spray 38500 Model JD9-C - 38500 The JD9 heavy-duty spray gun can help make your operation more effective and profitable. Check these advantages. Adjustable

More information

HIGH PRESSURE SPRAY GUNS &ACCESSORIES

HIGH PRESSURE SPRAY GUNS &ACCESSORIES HIGH PRESSURE SPRAY GUNS &ACCESSORIES Max. PSI: 4000 PSI Max. GPM: 10 GPM Weight 18 oz. TEEJET PW4000 Built in hose swivel Max. PSI: 4000 PSI Max. GPM: 10 GPM Weight 18 oz. TEEJET PW4000 Max. PSI: 4000

More information

Multiple Nozzle Body Assemblies for Dry Booms

Multiple Nozzle Body Assemblies for Dry Booms Multiple Nozzle Body Assemblies for Dry Booms QJ350 Compact Nozzle Body for Dry Booms n Compact design means easier mounting and less interference with boom structure. n Available with 3 or 5 spray positions

More information

MODEL PRECISION MADE IN SWITZERLAND AND DISTRIBUTED EXCLUSIVELY BY M-B COMPANIES, INC. IN NORTH AMERICA

MODEL PRECISION MADE IN SWITZERLAND AND DISTRIBUTED EXCLUSIVELY BY M-B COMPANIES, INC. IN NORTH AMERICA kamber PAINT GUN MODEL 38-20 PRECISION MADE IN SWITZERLAND AND DISTRIBUTED EXCLUSIVELY BY M-B COMPANIES, INC. IN NORTH AMERICA Pavement Marking Equipment Divisions Eastern Region 79 Montgomery Street Montgomery,

More information

FINISHING. Spray Guns

FINISHING. Spray Guns FINISHING Spray Guns Spray Finishing Technologies TECHNOLOGY & Finish Quality TECHNOLOGY FINISH QUALITY Air Spray - Delta Spray AIR SPRAY Atomisation through air pressure. Easy to use. Typically has 3

More information

Buy Karcher Parts Online: Need Technical Help? Call: Requests to:

Buy Karcher Parts Online:  Need Technical Help? Call: Requests to: Karcher Model:K 210 PLUS ( 59586790 ) - Parts Section: 1.1 PIECE PARTS Page 1 of 10 1 50672400 1 HOUSING 2 63031500 7 SCREW 3 50639310 1 COVER 4 66303570 1 SWITCH 5 58200700 1 CABLE BUSHING 6 66483310

More information

Instructions Parts List

Instructions Parts List Instructions Parts List CIRCULATING, HIGH PRESSURE Automatic Air Assisted Spray Gun 308780J 4000 psi (8 MPa, 80 bar) Maximum Working Fluid Pressure 100 psi (0.7 MPa, 7 bar) Maximum Working Air Pressure

More information

TUNGSTEN CARBIDE TIPS FOR HIGH-PRESSURE SPRAYING

TUNGSTEN CARBIDE TIPS FOR HIGH-PRESSURE SPRAYING TUNGSTEN CARBIDE TIPS FOR HIGH-PRESSURE SPRAYING TUNGSTEN CARBIDE TIPS SAVE ADHESIVES, COATINGS, PAINT, CHEMICALS & ELECTRICITY In high-pressure spraying applications, the high velocity of the liquid through

More information

Binks AIRLESS 1M SPRAY GUN

Binks AIRLESS 1M SPRAY GUN Binks AIRLESS 1M SPRAY GUN (For Professional Use Only) Model 44-6000 OPERATION AND MAINTENANCE INSTRUCTIONS OPERATING INSTRUCTIONS: The following steps and recommendations should be followed to get the

More information

patented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE General Catalogue a n d ot h e r p e n di n g

patented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE General Catalogue a n d ot h e r p e n di n g SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE PREVO S1 couplings represent the latest generation of pneumatic connection mechanisms. They provide a fully safe response to the

More information

Section E Fine Spray Nozzles

Section E Fine Spray Nozzles Section E Fine Spray s Overview Our fine spray hydraulic atomizing nozzles are available in two styles. Standard s: Traditional threaded nozzles made of metal. Quick-Connect s: Consisting of a nozzle body

More information

VALVES std $ fp $ fp $

VALVES std $ fp $ fp $ std = standard port POLY BOLTED STAINLESS STEEL BOLTS, NUTS & WASHERS fp = full port Code No. Part No. Size Price 5143361 60540 1/2 fp $ 29.29 5143362 60541 3/4 fp $ 29.29 5143363 60542 1 std $ 29.29 5143364

More information

ADDITIONAL DOCUMENTATIONS SPARE PARTS

ADDITIONAL DOCUMENTATIONS SPARE PARTS SPECIFICATIONS AIRSPRAY PNEUMATIC PUMP model 04-120 Manual : 0311 573.035.212 Date : 20/11/03 ADDITIONAL DOCUMENTATIONS SPARE PARTS Wall mounted unit Doc. 573.072.050 Fluid section Doc. 573.049.050 Air

More information

...IN YOUR HAND IT SPEAKS FOR ITSELF...significantly raising the benchmark in spraygun performance and productivity

...IN YOUR HAND IT SPEAKS FOR ITSELF...significantly raising the benchmark in spraygun performance and productivity T RANS-TECH COMPLIANT OR ADVANCED CONVENTIONAL TECHNOLOGY...IN YOUR HAND IT SPEAKS FOR ITSELF......significantly raising the benchmark in spraygun performance and productivity NOW INCLUDING GRAVITY FEED

More information

Camlocks. Snaplock Camlock Couplings. The original Snaplock quick release coupling. Applications

Camlocks. Snaplock Camlock Couplings. The original Snaplock quick release coupling. Applications Snaplock Camlock Couplings The original Snaplock quick release coupling The tried & trusted cam coupling with the high reputation of the Snaplock brand name offering additional features to our standard

More information

Airless Accessories. Complete Source for Genuine Parts and Accessories CONTENTS

Airless Accessories. Complete Source for Genuine Parts and Accessories CONTENTS Airless Accessories Airless Accessories Complete Source for Genuine Parts and Accessories CONTENTS Aluminum Airless Gun........ 4-5 Stainless Steel Guns.......... 6-7 Airless Tips................. 8-9

More information

HOSES & LANCES. Hoses & Lances 15,000 PSI (1,034 BAR)

HOSES & LANCES. Hoses & Lances 15,000 PSI (1,034 BAR) HOSES & LANCES Jetstream provides a full arrangement of hoses and flex lances for high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 15,000 psi application.

More information

Owner's Manual. Model: LS-PCO-100-GEM ( ) (100 Gallon Skid-Mounted High Pressure Sprayer) Technical Specifications. General Information

Owner's Manual. Model: LS-PCO-100-GEM ( ) (100 Gallon Skid-Mounted High Pressure Sprayer) Technical Specifications. General Information Owner's Manual Model: LS-PCO-00-GEM (5302043) (00 Gallon Skid-Mounted High Pressure Sprayer) Technical Specifications 00 Gallon Corrosion-Resistant PCO Tank 5.5 HP Honda Engine 990-D403GRGI Pump: (Maximun

More information

STUDIO S BATH ACCESSORIES TOWEL BARS

STUDIO S BATH ACCESSORIES TOWEL BARS STUDIO S BATH ACCESSORIES TOWEL BARS MODEL NUMBER: 7105.018-18" Towel Bar 7105.024-24" Towel Bar Available Finishes 002 Polished Chrome 295 PVD Brushed Nickel 2" 2" 3-7/8" (99 mm) 18" (457 mm) 2" 2" 3-7/8"

More information

Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.

Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation. Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True

More information

Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.

Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation. Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True

More information

Buy Karcher Parts Online: Need Technical Help? Call: Requests to:

Buy Karcher Parts Online:  Need Technical Help? Call: Requests to: Page 1 of 12 Karcher Model:HD 3000 MTD ( 59588400 ) - Parts Section:1.0 PIECE PARTS 1 91825140 1 BOLT 2 91823530 2 CONTROL KNOB 3 91963010 2 SCREW 5 91834050 2 RUBBER BUFFER 6 91963080 2 BOLT 7 91825060

More information

K950 RING. model_enhet_yyyy-mm

K950 RING. model_enhet_yyyy-mm A K950 RING 2 3 5 7 1 4 6 8 model_enhet_yyyy-mm Page A K950 Ring Pos. Part No. Description Quantity Notes New Part 1 506 28 09-02 BELT GUARD 1 Incl. 2, 3 2 544 87 25-01 LABEL 1 3 503 20 34-19 SCREW 4 4

More information

Ordering Information PFLO LT A

Ordering Information PFLO LT A Model Product Description Selected Option LT - A Precision Flo LT Code A Control Unit 1 Standard Control Unit 2 Advanced Control Unit 3 Robot Integrated Unit Code B Operations Cable 1 High Flex 20 ft (64

More information

Pounds Per Square Inch (PSI)

Pounds Per Square Inch (PSI) Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be

More information

HWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES

HWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES GENERAL PUMP HWB Series Hydraulic Drive Triplex Plunger Pump FEATURES INDUSTRIAL INDUSTRIAL Innovative drive design eliminates need for auxiliary hydraulic drive Forged brass manifold Built-in Pump Thermal

More information

B14 AAA FINE FINISH SERIES PUMP OUTFIT

B14 AAA FINE FINISH SERIES PUMP OUTFIT PRODUCT INFORMATION B14 AAA FINE FINISH SERIES PUMP OUTFIT The B14 AAA pump system is an air assisted airless unit which combines airless and conventional or HVLP air atomization technologies to produce

More information

Owner's Manual. Model: ( ) (150 Gallon, 5.5 HP Skid Sprayer) Technical Specifications. General Information. Warranty/Parts/Service

Owner's Manual. Model: ( ) (150 Gallon, 5.5 HP Skid Sprayer) Technical Specifications. General Information. Warranty/Parts/Service Owner's Manual Model: -0 (00) (0 Gallon,. HP Skid Sprayer) Technical Specifications General Information Thank you for purchasing this product. The purpose of this manual is to assist you in operating and

More information

SWINGTRIM Swingover Cutterbar Trimmer

SWINGTRIM Swingover Cutterbar Trimmer Publication 117(PM) December 2007 Part No. 1090850 Revision: 2 SWINGTRIM Swingover Cutterbar Trimmer Parts Manual For best performance USE ONLY McCONNEL SERVICE PARTS To be assured of the latest design

More information

ACCESSORIES CATALOGUE

ACCESSORIES CATALOGUE Headquarters and Production WIWA Wilhelm Wagner GmbH & Co. KG Gewerbestraße 1 3 35633 Lahnau Tel. +49(0)64 41/60 9-0 Fax +49(0)64 41/60 9-50 info@wiwa.de www.wiwa.de www.wiwa.com WIWA Partnership USA WIWA

More information

Model 570 Automatic Mastic Airless Spray Gun

Model 570 Automatic Mastic Airless Spray Gun Model 570 Automatic Mastic Airless Spray Gun 6700-0000-7 For Professional Use Only warning high pressure warning Maximum working Pressure Up to 4000 pounds per square inch Do not point spray gun at any

More information

Reservedele Parts Catalogue November 2015

Reservedele Parts Catalogue November 2015 Reservedele Parts Catalogue November 2015 Distribution: Impact is a trademark (TM) belonging to Linemark UK. E. Marker A/S Okslundvej 8, Bov DK-6330 Padborg Tel.: +45 74 67 08 08 E-mail: info@emarker.dk

More information

GUNS. YRL51 Gun. ST-1100 Lightweight Gun MTM Gun AL35. MV920 Karcher Style Gun. Spray Guns. ST-810 Front Entry MV2005.

GUNS. YRL51 Gun. ST-1100 Lightweight Gun MTM Gun AL35. MV920 Karcher Style Gun. Spray Guns. ST-810 Front Entry MV2005. GUNS YRL51 Gun ST-1100 Lightweight Perfect for cold water units or smaller hot water units 7 GPM 3050 PSI 300 F. max 13.2 GPM maximum 4050 PSI maximum 6267 4126 ST-1100 MTM407 7 GPM maximum 250 F. maximum

More information

Industrial Solutions. AirCoat guns. manual application. Excellent finishing quality Human engineered design High process reliability

Industrial Solutions. AirCoat guns. manual application. Excellent finishing quality Human engineered design High process reliability Industrial Solutions AirCoat guns manual application Excellent finishing quality Human engineered design High process reliability WAGNER AirCoat - Perfect finishing for high quality surfaces WAGNER AirCoat

More information

CP3850 Series Grinders

CP3850 Series Grinders 1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 1 1 X 5 Ring screw 6156731760 1 1

More information

VALVES. FIMCO Code # MFG Part # std $ fp $ fp $

VALVES. FIMCO Code # MFG Part # std $ fp $ fp $ 97 VALVES std = standard port fp = full port POLY BOLTED STAINLESS STEEL BOLTS, NUTS & WASHERS Size 5143361 60540 1/2 fp $ 29.29 5143362 60541 3/4 fp $ 29.29 5143363 60542 1 std $ 29.29 5143364 60543 1

More information

Right Angle Nozzle Assembly

Right Angle Nozzle Assembly Swirl- Air atomizing nozzle Features: Large internal passages with no vanes or cores assure unrestricted flow... Little chance for clogging No external struts or supports to interfere with spray pattern

More information

INSTRUCTION MANUAL ASI 24 AND ASI 40 AIRLESS GUN STAINLESS STEEL MODEL

INSTRUCTION MANUAL ASI 24 AND ASI 40 AIRLESS GUN STAINLESS STEEL MODEL l INSTRUCTION MANUAL ASI 24 AND ASI 40 AIRLESS GUN STAINLESS STEEL MODEL Manual : 1208 573.175.112 Date : 23/08/12 - Supersede : 19/10/11 Modif. : Update TRANSLATION FROM THE ORIGINAL MANUAL IMPORTANT

More information

GENERAL PUMPA member of the Interpump Group

GENERAL PUMPA member of the Interpump Group FEATURES Innovative drive design eliminates need for auxiliary hydraulic drive HWB Series Hydraulic Drive - Triplex Plunger Pump HWB2512 & HWB2112 Forged brass manifold No scheduled maintenance required

More information

T RANS-TECH COMPLIANT OR ADVANCED CONVENTIONAL TECHNOLOGY

T RANS-TECH COMPLIANT OR ADVANCED CONVENTIONAL TECHNOLOGY T RANS-TECH COMPLIANT OR ADVANCED CONVENTIONAL TECHNOLOGY...IN YOUR HAND IT SPEAKS FOR ITSELF......significantly raising the benchmark in spraygun performance and productivity NOW INCLUDES THE COMPACT

More information

Spare parts for SMC & TSMC 108 Mk3 Type S-L and E

Spare parts for SMC & TSMC 108 Mk3 Type S-L and E 00.0 Spare parts for 04-06- & T Mk3 Type S-L and E Relevant drawings for compressor 00 Mk 3, S-L-E (delivered after 89.0) Cylinder liner ect. - T 04, 06, Mk 3 (after 89.0) 00 Mk 3 Cylinder liner ect. -

More information

Operation Manual: Gti -A Automatic Gun

Operation Manual: Gti -A Automatic Gun Operation Manual: Gti -A Automatic Gun Important: Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment SB-E-2-366-F DESCRIPTION The GTI-A is a production spray gun suitable

More information

ROTARY, STRAIGHT, PIPE & TUBE CLEANING TOOLS & NOZZLES

ROTARY, STRAIGHT, PIPE & TUBE CLEANING TOOLS & NOZZLES Nozzles ROTARY, STRAIGHT, PIPE & TUBE CLEANING TOOLS & Jetstream provides tools for different 15,000 psi applications in surface preparation, pipe cleaning and tube cleaning. All of our tools are made

More information

:1 3:1 5:1 3:1 3:1 5:1 3:1 3:1 5:

:1 3:1 5:1 3:1 3:1 5:1 3:1 3:1 5: trolley for drums 30-60 kg kit for drums 30-60 kg 35260 35250 37500 35249 35259 37499 35264 35254 37504 3:1 3:1 5:1 3:1 3:1 5:1 3:1 3:1 5:1 20 14 18 20 14 18 20 14 18 35076 35173 36073 35076 35173 36073

More information

Original Spare parts. for SpriMag and aisa internal COating MaChineS and OvenS

Original Spare parts. for SpriMag and aisa internal COating MaChineS and OvenS Original Spare parts for SpriMag and aisa internal COating MaChineS and OvenS INDEX 1 Index 1 Index 2 Paint Supply and Spraying Technology 2.1 Paint Supply 2.1.1 Pressure Pot 2.1.2 Paint Filter and Accessories

More information

Binks AIRLESS 1 SPRAY GUN

Binks AIRLESS 1 SPRAY GUN Binks AIRLESS 1 SPRAY GUN (For Professional Use Only) Model 6700-0080-0 Less Tip OPERATION AND MAINTENANCE INSTRUCTIONS OPERATING INSTRUCTIONS: The following steps and recommendations should be followed

More information

GW MKIII DELUGE VALVE - ALUBRONZE EXTERNAL RESET, PNEUMATIC

GW MKIII DELUGE VALVE - ALUBRONZE EXTERNAL RESET, PNEUMATIC Jacking Bolts Outlet Connection to Release (dry pilot line) Connection to Alarm Line ANGUS GW DELUGE VALVE VALVE 2 Drain Port Note: All Other Connections ½ Inlet External resetting of clapper via hand

More information

Leaders in precision application components, control system technology, and application data management.

Leaders in precision application components, control system technology, and application data management. Catalog 51-M Leaders in precision application components, control system technology, and application data management. www.teejet.com Table of Contents Selection Guide TeeJet Broadcast Nozzle Selection

More information

K-BALL SERIES SPRAY NOZZLES

K-BALL SERIES SPRAY NOZZLES K-BALL SERIES NOZZLES K-Ball Clip-on spray nozzles CHARACTERISTICS: These nozzles simply clip over a pre-drilled pipe (9/16 dia. hole) and are available with a variety of spray balls, in various spray

More information

SNOW FOAM LANCES PLASTIC SNOW FOAM LANCE PROFESSIONAL SNOW FOAM LANCE SPARE PARTS

SNOW FOAM LANCES PLASTIC SNOW FOAM LANCE PROFESSIONAL SNOW FOAM LANCE SPARE PARTS 8 COMPANY PROFILE BEARFORCE Industries Co.,Ltd is an export-oriented professional manufacturer of snow foam lances and high pressure washer accessories in Xuanchen city, Anhui province, China. Its brother

More information

Strahman. Since Strahman full line catalogue Hoses Nozzles Hot Water Makers Mixing Units & Accessories Accessories

Strahman. Since Strahman full line catalogue Hoses Nozzles Hot Water Makers Mixing Units & Accessories Accessories Strahman Strahman full line catalogue Hoses Nozzles Hot Water Makers Mixing Units & Accessories Accessories Since 1964 675 The Parkway Peterborough, ON K9J 7K2 1-800-361-5361 705-743-5361 Catalogue Strahman

More information

CP3850 Series Grinders

CP3850 Series Grinders 1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 X 5 Ring screw 6156731760 1 1 1 1 1 X 6 Autobalancer

More information

MF7. Hydraulic Lift Pumps and Related Components

MF7. Hydraulic Lift Pumps and Related Components Page Hydraulic Pumps 2- Hydraulic Pump Repair Kits - Auxiliary Pumps, Radial Pumps, Filters - Covers - Cylinders Hydraulic Quick Couplers MF Pumps and Related MF 2 & Hydraulic Pumps S.0 Hydraulic Pump

More information

FACADES AND INTERIOR WALLS. Equipment for large construction sites and new-build FACADES AND INTERIOR WALLS - LARGE CONSTRUCTION SITES

FACADES AND INTERIOR WALLS. Equipment for large construction sites and new-build FACADES AND INTERIOR WALLS - LARGE CONSTRUCTION SITES FACADES AND INTERIOR WALLS - LARGE CONSTRUCTION SITES FACADES AND INTERIOR WALLS Equipment for large construction sites and new-build Facade design and interior wall coating with emulsion and latex paints

More information

PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX

PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly

More information

AIRLINE EQUIPMENT CATALOGUE //

AIRLINE EQUIPMENT CATALOGUE // AIRLINE EQUIPMENT CATALOGUE // 16 15 14 13 12 11 10 9 The Fort Vale Range of Airline Ball & Butterfly Valves 8 Fort Vale Engineering Ltd. 2014 THIS PAGE IS INTENTIONALLY BLANK AIRLINE VALVE CATALOGUE //

More information

Roller Pump Comparisons

Roller Pump Comparisons Roller Pump Comparisons Get up to 10 times longer pump life with Hypro Silver Series XL Roller pumps! These three pump housings were photographed after being tested with a 30:1 mix of water and Roundup

More information

10 SPARE PART LIST - G 2900 X

10 SPARE PART LIST - G 2900 X Table of contents G 2900 X (1.107-384.0) 10 SPARE PART LI - G 2900 X 10 FRAME 20 PUMP SET 1 CYLINDER HEAD (8.921-430.0) 8 SPARE PART LI NOZZLE INS 020/021 PUMP (9.139-372.0) 9 Spare part set chemistry

More information