Installation Instructions

Transcription

1 REPRISE TRIM KIT Installation Instructions T55.0 Thank you for selecting Porcher Products. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. ROUGHING-IN (FOR REFERENCE) CAUTION Turn off hot and cold water supplies before beginning. See Roughing-in Drawing on reverse side. The port with the BATH TUB picture is the high flow. Certified to comply with ANSI A.8.M U.S. Patent No. 5,89,789 M9685 ROUGHING-IN DIMENSIONS NOTE: NO CONCEALED PIPING FURNISHED -9/6 The DIVERTER can be installed with the inlet rotated in any position. Supply connections are /" NPT connections. For proper positioning the finished wall must be within side of PLASTER GUARD. -/8 -/ -WAY -WAY FINISHED WALL TEST DIVERTER Check that the DIVERTER () operates correctly and does not leak. To do this, screw off the PLASTER GUARD (), turn around, insert using the fluted pin into the fluting on the DIVERTER SPINDLE () Use the PLASTER GUARD () as a diverter knob. Screw the PLASTER GUARD () back on. Have the wall tiled only with the PLASTER GUARD () installed. -5/8 INSTALL TRIM When finished tiling wall, remove PLASTER GUARD (). Place ESCUTCHEON () on HANDLE ASSEMBLY (). Thread HANDLE ASSEMBLY () with ESCUTCHEON () onto DIVERTER SHANK () until tight against the finished wall. To operate, turn the HANDLE clockwise or counter clockwise.

2 SERVICE To Replace O-Rings: Turn off water supply. Thread counter clock-wise HANDLE ASSEMBLY () and remove HANDLE ASSEMBLY () and ESCUTCHEON (). Unscrew CAP () and remove STEM (), SPRING (5) and SEALS (6). Remove old DIVERTER ELEMENTS (7) and install new parts. Assemble new and remaining parts in reverse order M9607-YYY0A ESCUTCHEON REPRISE TRIM KIT MODEL NUMBER T55.0 M9606-YYY0A HANDLE ASSEMBLY M A INDEX BUTTON HOTLINE FOR HELP For toll-free information and answers to your questions, call: (800) 59-6 Weekdays 8:00 to 7:00 p.m. EST IN CANADA Replace the "YYY" with appropriate finish code CHROME POLISHED NICKEL POLISHED BRASS BRUSHED NICKEL Product names listed herein are trademarks of Porcher, Ltd. Porcher, Ltd.00 M9685

3 Installation Instructions RPO RP0 SHOWER SYSTEMS (TWO-WAY AND THREE-WAY) RP0 RPO Thank you for selecting Porcher Products. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. (TWO-WAY) (THREE-WAY) Certified to comply with ANSI A.8.M U.S. Patent No. 5,89,789 M9689 ROUGHING-IN The port with the BATH TUB picture is the high flow. CAUTION Turn off hot and cold water supplies before beginning. ROUGHING-IN DIMENSIONS NOTE: NO CONCEALED PIPING FURNISHED -9/6 The DIVERTER can be installed with the inlet rotated in any position. Supply connections are /" NPT connections. For proper positioning the finished wall must be within side of PLASTER GUARD. -/8 -/ FINISHED WALL -WAY -WAY -5/8 MIN MAKE PIPING CONNECTIONS Connect water to valve. The reverse side of the body is marked with arrows. CAUTION: Do not solder near the VALVE. Damage to the SEALS may occur. Do not seal any outlets. The DIVERTER cannot be used as a stop valve. For support use pipe braces secured to wooden braces. Wood screws can also be used to secure the diverter. PIPE BRACES INLET WOOD SCREWS

4 TEST DIVERTER Check that the DIVERTER () operates correctly and does not leak. To do this, screw off the PLASTER GUARD (), turn around, and insert using the fluted pin into the fluting on the DIVERTER SPINDLE (). Use the PLASTER GUARD () as a diverter knob. Screw the PLASTER GUARD () back on. Have the wall tiled only with the PLASTER GUARD () installed. SERVICE To Replace O-Rings: Turn off water supply. Unscrew CAP () and remove STEM (), SPRING () and SEALS ). Remove old DIVERTER ELEMENTS (5) and install new parts. Assemble new and remaining parts in reverse order. 5 M9689

5 SHOWER SYSTEMS RP0 (THREE-WAY) RPO (TWO-WAY) RP0 (TWO-WAY) PLASTER GUARD RP0 (THREE-WAY) A DIVERTER REPAIR KIT A SPRING KIT A CAP A STEM KIT A CAP SEAL HOTLINE FOR HELP For toll-free information and answers to your questions, call: (800) 59-6 Weekdays 8:00 to 7:00 p.m. EST IN CANADA Product names listed herein are trademarks of Porcher, Ltd. Porcher, Ltd.00 M9689