UPGRADABLE PRESSURE BALANCE BATH/SHOWER FITTING TEMPERATURE CONTROL VALVE

Transcription

1 OFF H Cold Colony One R110 Valve Body Shown Available Trim Kits Tropic Dazzle Hampton Standard Town Square GENERAL DESCRIPTION: Enfield Amarilis Cast brass body, washerless ceramic disc valve cartridge with back-to-back capability and hot limit safety stop. Cycles from "off" to "cold" to "hot". Pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressure. One-half inch inlets and outlets (choice of direct sweat, threaded, or PEX). Available with screwdriver stops. Rough-in plaster guard designed for use as thin-wall mounting adaptor. Valve body will accept a variety of decorative Bath/Shower trims. PRODUCT FEATURES: Cast Brass Valve Body: Durable - Quality that will last a lifetime. Ideal material for prolonged contact with water. Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance. Allows easy fine tuning of temperature (125 handle rotation from off to hot). Pressure Balancing Valve Cartridge: Maintains constant output temperature in response to changes in hot and cold supply pressure. Diaphragm system engineered to eliminate cross flow. Avoids failure due to mineral deposits - ideal for use in hard water Back-to-Back Capability: and cold can be reversed quickly and easily. Adjustable Limit Safety Stop: Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding. Exclusive Plaster Guard: Plaster guard is designed to protect valve during installation and serve as a mounting plate for thin-wall installations. 2 piece design allows valve to be tested prior to trim installation. Wide Rough-in Range: From 1-5/8" to 3-1/4". UPGRADABLE PRESSURE BALANCE BATH/SHOWER FITTING TEMPERATURE CONTROL VALVE (74") SHR. 1/2" NOM. SWEAT MODEL NUMBER: R110 Pressure Balance Rough Valve Body only Direct sweat inlets/outlets. LESS trim. R110SS Pressure Balance Rough Valve Body only with Screwdriver stops Direct sweat inlets/outlets. Screwdriver stops. LESS trim. R115 Pressure Balance Rough Valve Body only Female thread inlets/outlets. LESS trim. R115SS Pressure Balance Rough Valve Body only with Screwdriver stops Female thread inlets/outlets. Screwdriver stops. LESS trim. R117 Pressure Balance Rough Valve Body only PEX inlets/direct sweat outlets. LESS trim. R117SS Pressure Balance Rough Valve Body only with Screwdriver stops PEX inlets/direct sweat outlets. Screwdriver stops. LESS trim. See reverse for available trim kits. 41mm TO 83mm (1-5/8" TO 3-1/4") SWEAT SUGGESTED SPECIFICATION: Bath/shower fitting shall feature a cast brass body. Shall feature ceramic disc valve cartridge which is capable of back-to-back installation. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model # R11, Trim Kit - American Standard Model #.. (1") (4") REF. 109mm (4-1/4") PEX (R117) 1/2" NPT 1/2" 52 mm (2-1/32") 1/2" PEX (ASTM F1807) 104 mm VALVE BODY OPTIONS SHR. 1/2" NOM. SWEAT 1/2" NOM. SWEAT SWEAT 86 mm (3-3/8") TUB PORT THREADED (R115) SHR. 1/2" NOM. SWEAT SWEAT SHR. 1/2" NOM. SWEAT 86 mm (3-3/8") SWEAT 149 mm (5-7/8") THREADED (STOPS) (R115SS) 165mm (6-1/2") SWEAT (R110) 149 mm (5-7/8") 51.5 mm (2-1/32") SHR PEX (STOPS) (R117SS) SHR. 1/2" NOM. 51 mm SWEAT (2") SWEAT SWEAT (STOPS) (R110SS) 52 mm (2-1/32") 1/2" PEX (ASTM F1807) 104 mm B1

2 OFF H UPGRADABLE PRESSURE BALANCE BATH/SHOWER FITTING TEMPERATURE CONTROL VALVE Valve + Trim: Trim Kit & Valve Body Packaged Separately To order: Specify valve body and trim kit desired Example: R110 - Direct Sweat Valve Body T Hampton Bath/Shower Trim Kit (Porcelain ) GALLONS PER MINUTE 8 FLOW RATE* Spout VALVES R110 Direct Sweat Inlets/ Outlets R110SS Direct Sweat Inlets/Outlets w/ Screwdriver Stops R115 Female Thread Inlets/ Outlets R115SS Female Thread Inlets/Outlets w/ Screwdriver Stops R117 PEX Inlets/Direct Sweat Outlets R117SS PEX Inlets/Direct Sweat Outlets w/ Screwdriver Stops INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. CODES AND STANDARDS These products meet or exceed the following codes and standards: ASSE 1016 ASME A CSA B 125 Showerhead with 2.5gpm/9.5L.min. flow restrictor. Colony* Tropic Dazzle Hampton** Standard Town Square One Enfield*** Amarilis**** B/S Shower T375.XXX T372.XXX T T T T Valve T371.XXX T T T T215.7XX T212.7XX T6181 T6180 T T T T T373.5X2 T373.5X1 T T211.7XX T6179 T T T373.5X0 T NOTES: * COLONY with 2.5 showerhead with FloWise showerhead 120 ** HAMPTON available with choice of three handles. to order: specify the three digit handle number ex) T (valve only trim kit w/ porcelain lever handle) Porcelain *** ENFIELD available with lever or cross handle **** AMARILIS trim kits are less handles--must be ordered separately. the following handle kits are available: Perfume Bottle 431 Lexington 901 B2

3 C H Trim Kits for R110, R110SS, R115, R115SS, R117, R117SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow. ONLY. VALVE MUST BE ORDERED SEPARATELY. Model # Trim Kit Description Finishes Roughing-In Dimensions COLONY COLONY WITH FLOWISE T BATH/SHOWER Trim Kit handle "Easy Clean" Showerhead Slip-on Diverter tub spout T SAME AS ABOVE With lever handle T SHOWER ONLY Trim Kit handle "Easy Clean" Showerhead T SAME AS ABOVE With lever handle T VALVE ONLY Trim Kit handle T SAME AS ABOVE With lever handle T BATH/SHOWER Trim Kit handle Water Saving FloWise Showerhead Angle adjustable Diverter tub spout Less valve T SAME AS ABOVE handle T BATH/SHOWER Trim Kit handle Water Saving FloWise Showerhead Angle adjustable Less valve T SAME AS ABOVE handle (4") REF. (74") 178mm (7") REF. (4") REF. (74") (5") REF. 178mm (7") REF. (5") REF. 41mm TO 83mm (1-5/8" TO 3-1/4") 152mm (6") 171mm (6-3/4") 41mm TO 83mm (1-5/8" TO 3-1/4") 152mm (6") 171mm (6-3/4") OFF TROPIC T BATH/SHOWER Trim Kit handle Slip-on Diverter tub spout T SHOWER ONLY Trim Kit handle 108mm (4-1/4) REF. 74" 152mm (6) REF. 19mm to 60mm (3/4 to 2-3/8) T SHOWER ONLY Trim Kit handle (5-5/8) 1/2" B3

4 Trim Kits for R110, R110SS, R115, R115SS, R010, R015, R117, R117SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow. ONLY. VALVE MUST BE ORDERED SEPARATELY. Model # Trim Kit Description Finishes Roughing-In Dimensions HAMPTON Cold T215.7XX BATH/SHOWER Trim Kit Adjustable brass Showerhead Slip-on diverter tub spout T212.7XX SHOWER ONLY Trim Kit Adjustable brass Showerhead T211.7XX VALVE ONLY Trim Kit Porcelain, Finishes.099 Polished Brass (PVD) Finishes Polished Brass (PVD) Satin (PVD)/Pol. Chrome mix. Satin/Brass (PVD) mix. Pol. Chrome/Brass (PVD) mix. 127 mm REF. (5") REF. 178 mm REF. (7") REF. 57mm - 83mm (2-1/4-3-1/4) 130mm (5-1/8) REF. DAZZLE T BATH/SHOWER Trim Kit Slip-on diverter tub spout (5) REF. 197mm (7-3/4)REF. 41mm - 83mm (1-5/8-3-1/4) T SHOWER ONLY Trim Kit 74" 18" (8) American Standard T VALVE ONLY Trim Kit 135mm (5-5/16) REF. STANDARD T6181 BATH/SHOWER Trim Kit wall escutcheon Porcelain lever handle 5" adjustable showerhead T6181 T6181S 130mm (5-1/8)REF. 191mm (7-1/2) REF. 57mm - 83mm (2-1/4-3-1/4) T6180 SHOWER ONLY Trim Kit wall escutcheon Porcelain lever handle 5" adjustable showerhead T6179 VALVE ONLY Trim Kit wall escutcheon Porcelain lever handle T6180 T6180S T6179 T6179S (1) (5-5/8) REF. HAMPTON HANDLE OPTIONS 710 Porcelain* Hampton available with choice of 3 handles. To order: specify the 3 digit handle number. eg: T = Hampton Valve Only Trim Kit with Porcelain B4

5 SHW TUB Trim Kits for R110, R110SS, R115, R115SS, R010, R015, R117, R117SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow. ONLY. VALVE MUST BE ORDERED SEPARATELY. Trim Kit Model # Description Finishes Roughing-In Dimensions TOWN SQUARE T BATH/SHOWER Trim Kit wall escutcheon lever handle 4 1/2" Rain showerhead T SHOWER ONLY Trim Kit wall escutcheon lever handle 4 1/2" Rain showerhead 51mm (2) REF. 1 (8) REF. (7-1/4 REF.) (1) 41mm to 83mm (1-5/8 TO 3-1/4) 1/2" I.P.S. T VALVE ONLY Trim Kit wall escutcheon lever handle ONE T BATH/SHOWER Trim Kit Adjustable 3 function showerhead (5-5/8) REF. 206mm (8-1/8) REF. 41mm to 83mm (1-5/8 TO 3-1/4) T SHOWER ONLY Trim Kit Adjustable 3 function showerhead T VALVE ONLY Trim Kit (5-5/8) REF. (7-1/4" DIA.) 13mm (1/2 MAX.) ONE T M3 SHOWER only Trim Kit 8" Contemporary Rain Showerhead 127 (5 REF.) (8 DIA.) 64mm (2-1/2) 279mm (11 REF.) 41mm to 83mm (1-5/8 TO 3-1/4) (7-1/4" DIA.) mm (48-54) ONE T M3 Shower Trim Kit with Built-in Diverter, Handheld Shower & Tub Spout with built-in diverter Adjustable Slide Bar and Hand Shower Brass Tub Spout 13mm 1/2" REF. TO FLOOR USUALLY BETWEEN 1219 & 1524mm 48'' AND 60'' 7-1/4" D mm 1-5/8" TO 3-1/4" 18" 171mm 6-3/4" TO FLOOR USUALLY BETWEEN 914 & 1219mm 36'' AND 48'' 4" 13mm 1/2" REF. OF TUB B5

6 Trim Kits for R110, R110SS, R115, R115SS, R010, R015, R117, R117SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow. ONLY. VALVE MUST BE ORDERED SEPARATELY. Trim Kit Model # Description Finishes Roughing-In Dimensions ENFIELD T BATH/SHOWER Trim Kit wall escutcheon cross handle T SHOWER ONLY Trim Kit wall escutcheon cross handle T VALVE ONLY Trim Kit wall escutcheon cross handle.008 Polished Nickel (5) REF. 74" (188cm) (1) (8)REF. 41mm - 83mm (1-5/8-3-1/4) ENFIELD T BATH/SHOWER Trim Kit wall escutcheon lever handle T SHOWER ONLY Trim Kit wall escutcheon lever handle T VALVE ONLY Trim Kit wall escutcheon lever handle.008 Polished Nickel (18 ) (7-1/4) REF. 1-1/2" REF. () AMARILIS T BATH/SHOWER Trim Kit Rain showerhead LESS T BATH/SHOWER Trim Kit Rain showerhead LESS T BATH/SHOWER Trim Kit LESS Polished Nickel Polished Brass (PVD) Satin/Brass mixage (PVD) Pol. Chrome/Brass (PVD) mix. 2" (51mm) 4-7/8" (123mm) 74" (188cm) 18" () optional 4" () 1-1/2" MIN. 8" REF. (204mm) 1-1/2" REF. () 7-1/4" REF. () 1-5/8" TO 3-1/4" (41mm - 83mm) 6" (153mm) 3" (76mm) 6" (153mm) The above fittings will accept the following Amarilis-Series handles. Perfume Bottle Porcelain Lexington B6