13IN. WAREHOUSE BARN RETROFIT LIGHT OWNER S MANUAL

Transcription

1 13IN. WAREHOUSE BARN RETROFIT LIGHT OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item#

2 2

3 Thank you very much for choosing a Northern Industrial Tools product! For future reference, please complete the owner s record below: Model: Purchase Date: Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This light is designed for certain applications only. The distributor cannot be responsible for issues arising from modification. We strongly recommend this light not be modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the light until you have first contacted the distributor to determine if it can or should be performed on the product. For technical questions please call INTENDED USE The light is perfect for your warehouse, yard, barn, etc. It has a durable 19-ga. lamp cover and powder-coated for rust resistance.turns it into any E26 bulb socket to improve the light distribution. The cage and glass cover protect the bulb from damage. TECHNICAL SPECIFICATIONS Item Material Finish Size Bulb Lamp type Description Metal steel Body Powder-coat 13in. Shade Cover Requires E26 bulb (not included) 110 Volt, 100 Watt, 60Hz GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in serious injury. CAUTION: Do not allow persons to operate or assemble this light until they have read this manual and have developed a thorough understanding of how the light works. WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the 3

4 operator that common sense and caution are factors that cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS IMPORTANT SAFETY CONSIDERATIONS Proper installation of this product requires the installer to have a good understanding of circuitry. Please operate your light according to Operation Method and retain the proper operation procedures. Before attempting to install your light, ensure power to outlet box is off for your own safety. WARNING: Connect green fixture wire to grounding screw in junction box. WARNING: Do not touch the steel parts when it is working. Do not use any harsh abrasives, detergents or anything containing ammonia to clean your light. Bulb is not included with the light; use a standard E26 bulb only. FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS AND INSTRUCTIONS COULD RESULT IN DAMAGE TO THE PRODUCT OR SERIOUS INJURY TO YOU! LIGHT USE AND CARE Do not modify the light in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the light was designed. Check damaged or worn out parts before using the light. Broken parts will affect the light operation. Replace or repair damaged or worn parts immediately. OPERATION Make sure to shut down the power supply. Unscrew the cage(3)and glass cover(2); Mount a standard E26 bulb into the light, and then tighten the glass cover(2), cage(3). Finally, tighten the M4 set screw (4) of the cage. Turns it into any E26 bulb socket. Turn on the power supply. Refer to the chart below for acceptable bulb types: Watts Bulb Type 100 Watts Max. A19 Lamp, E26 Base 4

5 MAINTENANCE Maintain your light. It is recommended that the general condition of any light be examined before it is used. Keep your light in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel. PARTS DIAGRAM PARTS LIST Part No. Description Quantity 1 Shade 1 2 Glass Cover 1 3 Cage 1 4 M4 Set Screw 1 For technical questions please call

6 WARRANTY 1-year limited warranty Distributed by: Northern Tool + Equipment Co., Inc. Burnsville, Minnesota NorthernTool.com Made in China 6

7 7