12 INCH WAREHOUSE BARN PENDANT LIGHT

Transcription

1 12 INCH WAREHOUSE BARN PENDANT LIGHT OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# Color Black Forest Green Silver 1

2 Thank you very much for choosing this light! For future reference, please complete the owner s record below: Model: Purchase Date: Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This light is designed for certain applications only. The distributor cannot be responsible for issues arising from modification. We strongly recommend this light not be modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the light until you have first contacted the distributor to determine if it can or should be performed on the product. For technical questions please call INTENDED USE The 12in. warehouse barn pendant light is perfect for your warehouse, yard, barn, etc. It has a durable 19-ga. aluminum lamp cover and is powder-coated for rust resistance. The metal cage protects the bulb from damage. TECHNICAL SPECIFICATIONS Item Material Finish Size Bulb Lamp type Description Aluminum Powder-coat 12in. Shade Cover Requires E26 bulb (not included) 120 Volt, 100W,60Hz GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in serious injury. CAUTION: Do not allow persons to operate or assemble this light until they have read this manual and have developed a thorough understanding of how the light works. locations. CAUTION: Risk of fire. Install fixture at least 4 feet from the ground. Suitable for wet 2

3 WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors that cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS IMPORTANT SAFETY CONSIDERATIONS Proper installation of this product requires the installer to have a good understanding of circuitry. Please operate your barn light according to Operation Method and retain the proper operation procedures. Before attempting to install your barn light, ensure power to outlet box is off for your own safety. WARNING: Connect green fixture wire to grounding screw in junction box. WARNING: Do not touch the steel parts when it is working. Do not use any harsh abrasives, detergents or anything containing ammonia to clean your barn light. Bulb is not included with the barn light; use a standard E26 bulb only. FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS AND INSTRUCTIONS COULD RESULT IN DAMAGE TO THE PRODUCT OR SERIOUS INJURY TO YOU! LIGHT USE AND CARE Do not modify the light in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the barn light was designed. Check damaged or worn out parts before using the barn light. Broken parts will affect the barn light operation. Replace or repair damaged or worn parts immediately. ASSEMBLY 1. Disconnect power at main electrical box before installing fixture. 2. Thread the fixture mounting screws (9) into the provided holes of the mounting bracket (7) as shown. 3. Pull the power supply wires out from the junction box,and mount the mounting bracket(7) to the junction box, using mounting screws(8). (You can also use tapping screws(11) and wall plugs (12) for fixing.) 4. Attach the gasket(6) to back plate(5),then attach the black fixture wire to the black supply wire and the white fixture wire to white supply wire, using wire nuts (13) provided. 3

4 5. Connect 2 green fixture wires (1 in the cord and 1 on the back plate) to grounding screw in the junction box. 6. Place the back plate (5) over the junction box and onto the fixture mounting screws (9).Adjust the fixture mounting screws (9) until they protrude out from the back plate 5/32.Then attach the cap nut (10) provided. ** Adjust wire for high or low ceiling: Loosen the wire lock on the 10 ft. wire, move it to the suitable location on the wire, then tighten it. Cut off the extra parts, and then connect the wire (refer to steps 4 and 5). OPERATION Make sure to shut down the power supply. Remove the cage (2) and mount a standard E26 bulb into the light, then mount the cage. Turn on the power supply. Refer to the chart below for acceptable bulb types: Watts Bulb Type 100 Watts Max. A19 Lamp, E26 Base MAINTENANCE Maintain your barn light. It is recommended that the general condition of any barn light be examined before it is used. Keep your barn light in good repair by adopting a program of consistent repair and maintenance. Have necessary repairs made by qualified service personnel. 4

5 PARTS DIAGRAM 5

6 PARTS LIST Part No. Description Quantity 1 Shade 1 2 Cage 1 3 Lamp Holder 1 4 Wire 1 5 Back Plate 1 6 Gasket 1 7 Mounting Bracket 1 8 Mounting Screw(#8-32) 2 9 Fixture Mounting Screw 2 10 Cap Nut 2 11 Tapping Screw(not shown) 2 12 Wall plug(not shown) 2 13 Wire nut(not shown) 3 For technical questions please call Dawn to dusk sensor sold separately, refer to the form below: Item# Color Black White Silver Forest Green Copper 6

7 APPENDIX: A SKETCH MAP FOR LIGHT MOUNTING Ground Screw Junction Box by others Mounting Screw White to live wire Grounding wire on the back plate Grounding wire Black to neutral wire 7

8 WARRANTY 1-year limited warranty Distributed by: Northern Tool + Equipment Co., Inc. Burnsville, Minnesota NorthernTool.com Made in China 8