SIDE DUMPING WAGON OWNER S MANUAL

Transcription

1 3-IN-1 SIDE DUMPING WAGON OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. MODEL# YTF-2038SDW

2 Thank you very much for choosing a Yard Tuff product. For future reference, please complete the owner s record below: Model: YTF-2038SDW Purchase Date: Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This product is designed for certain applications only. The manufacturer or distributor cannot be responsible for issues arising from modification. We strongly recommend this product not be modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first contacted the distributor to determine if it can or should be performed on the product. For technical questions please call INTENDED USE This wagon has side dumping capability with removable sides, has 800-lb. load capacity, and 38in.L x 20in.W bed. You'll never want a more durable yard work companion. attachment for towing behind Lawn Tractors or ATV s at low speeds. TECHNICAL SPECIFICATIONS Includes handle Load Capacity (lbs.) 800 Deck Material Steel Frame Material Steel Wheel Type Pneumatic Wheel Size (in.) 10 Steering Type Pull handle and Tongue Handle Type Straight Axle Diameter (in.) 5/8 Dimensions L x W x H (in.) GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in serious injury. CAUTION: Do not allow persons to operate or assemble this hose reel cart until they have read this manual and have developed a thorough understanding of how the hose reel cart works. WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Page2

3 SAVE THESE INSTRUCTIONS WORK AREA Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents. Keep children and bystanders away while assembling or operating the wagon/cart. Distractions can cause you to lose control, so visitors should remain at a safe distance from the work area. Be aware of all power lines, electrical circuits, water pipes and other mechanical hazards in your work area, particularly those hazards below the work surface hidden from the operator s view that may be unintentionally contacted and may cause personal harm or property damage. Be alert of your surroundings. Using the cart in confined work areas may put you in a dangerous situation. PERSONAL SAFETY Stay alert, watch what you are doing and use common sense when using the cart. Do not use the cart while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating the cart may result in serious personal injury. Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. CART USE AND CARE Do not modify the cart in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment. Always check for damaged or worn out parts before using the cart. Broken parts will affect the cart operation. Replace or repair damaged or worn parts immediately. WARNINGS: 1. BE AWARE of side hills or steep inclines. Operate on flat surfaces as small inclines or hills can cause wagon to tip over or roll out of control. 2. NEVER use this wagon at speed higher than 5MPH. This cart is designed to operate at low speeds at all times. 3. Not recommended to transport people or pets. Page3

4 ASSEMBLY Step 1 Step 2 Assemble the Rear Axle support (#3) onto the main U Frame (#2) using M8x45 bolts (#11) and Lock nuts, Flat washer (#16, #17) Assemble the Front Axle support (#4) onto the main U Frame (#2) using M12 90 bolt (#13) and Lock nut, Flat washer (#14, #18) WAIT TO ATTACH WASHER & NUT UNTIL NEXT STEP Step 3 Step 4 Assemble the Front Axle Brace (#25) onto the Front Axle Support using M12x90 bolt from last step and M8x45 Bolt (#11), washer and lock nuts ( #16, #17) Assemble the Tongue Bracket (#5) onto the front axle support (#4) using M8x65 bolts (#10) and Lock nuts, Flat washer (#16, #17) Step 5 Step 6 Assemble each Wheel using Flat washer and Cotter pin (#19, #20) Assemble the Front, 2 Sides, & Back Fence (#22, #23, #24) onto the Bed using B pins(#21) Step 7 Step 8 Assemble the main U Frame (#2) onto the Bed using M8x45 bolts (#11) and Lock nuts, Flat washers (#16, #17) Assemble the Handle (#8) into the Tongue Bracket using M8x45 bolts (#11) and Lock nut, Flat washer (#16, #17) Page4

5 Step 9 Step 10 Assemble the handle end (#26) using M8x45 bolt (#11); flat washer, lock nut (#16, #17). Next, attach handle roller tube (#27) into the Handle using M8x150 bolt (#15); flat washer, lock nut(#16, #17) OPTIONAL: Assemble the tow hitch adapter (#6) onto the handle roller tube (#27) using M8 65 bolt(#10); flat washer, lock nut (#16, #17). Bolt M12x170 is for hitch pin; with washer, lock nut (#18, #14) MAINTENANCE Assemble the chain from the bed to the frame. Chain should be tight when wagon bed in fully tipped up. Connect on shorter chain link if needed to keep chain tight. Maintain your cart. It is recommended that the general condition of the hose reel cart be examined before it is used. Keep the hose reel cart in good repair by adopting a program of conscientious repair and maintenance in accordance with the recommended procedures found in this manual. Keep the cart clean. A properly maintained cart will work more effectively. Keep all of parts dry, clean, and free from oil and grease. Cleaning. Use only soap and a damp cloth to clean your cart. DIAGRAM & PARTS LIST #1 Bed (1pc) #22 Front Fence (1pc) #23 Back Fence (1pcs) #24 Side Fence (2pc) #2 Platform U Frame (1 pc) #3 Rear Axle Support (1pc) #4 Front Axle Support (1pc) #5 Tongue Bracket (1pc) #6 Tongue (1pc) Page5

6 #7 Wheel (4pcs) #8 Handle (1pc) #9 Chain (1pc) #10 Bolt (M8 65)(3pcs) #11 Bolt(M8 45)(9pcs) #12 Bolts(M12*170mm)(1pc) #13 Bolts(M12 90)(1pc) #14 Lock Nut(M12)(2pcs) #15 Bolt (M8 150)(1pc) #16 Lock Nut(M8)(13pcs) #17 Flat Washer(8mm)(13pcs) #18 Flat Washer(12mm)(1pc) #19 Flat Washer(16mm) (4pc) #20 Cotter Pin (4pcs) #21 B pin (8pcs) #25 Front Axle Brace(1pc) #26 Tow Hitch (1pc) #27 Hitch Tube (1pc) For replacement parts and technical questions, please call Page6

7 WARRANTY One-year limited warranty Distributed by TG PO BOX 203 Miltona, MN Made in CHINA Page7