Axor 1828/60 4x2 F/C. Axor 2528L/51 6x2 F/C. Mass Data (kg) Manufacturer s Gross Vehicle Mass
|
|
- Natalie Bryan
- 5 years ago
- Views:
Transcription
1 1823K/36 4x2 Tipper 1828/60 4x2 F/C 2528L/51 6x2 F/C 2628/ L/57 6x2 F/C 2628B/33 6x4 Mix/ Tipper 1835LS/36 Overall Length Overall Width Overall Height Front Overhang Rear Overhang Wheelbase Bumper to Back of Cab Back of Cab to Centre Rear Axle Turning Radius (m) 7,45 11,2 10,8 9,9 11,2 8,0 7,45 Data (kg) Manufacturer s Gross Vehicle Manufacturer s Gross Combination Manufacturer s Front Axle Manufacturer s Rear Axle Permissible Maximum Vehicle Permissible Maximum Front Axle Permissible Maximum Rear Axle Unladen Front Axle Unladen Rear Axle Total Unladen Permissible Max Drawing Vehicle Capacity (cm 3 ) Max Power kw r/min Max Torque r/min 170 (231) G85-6/6.7 Allison 3000P No of Forward Gears High / Low Ratios 6,7:1 / 0,73:1 9,478:1 / 1:1 9,478:1 / 1:1 9,478:1 / 1:1 3,59:1 / 0,69:1 9,478:1 / 1:1 14,94:1 / 1:1 Synchromesh or Constantmesh Synchromesh Synchromesh Synchromesh Synchromesh Automatic Synchromesh Constantmesh 6,000:1 4,300:1 4,333:1 4,333:1 5,222:1 4,833:1 3,077:1 Size and Ply Rating 315/80 R /80 R /80 R /80 R /80 R /80 R /80 R22.5 Radial or Crossply Radial Radial Radial Radial Radial Radial Radial 138 FOCUS ON TRANSPORT
2 1840LS/ LS/39 6x2 T/T 3335S/ S/ / / K/36 6x4 Tip 3535K/51 HYP 8x4 Tip / Mix 3535K/51 HUB 8x4 Tip ,45 7,75 8,05 8,05 10,5 10,5 8,45 10,75 10, G330-12/11.94 G330-12/11.94 G221-9/10.19 G210-16/ ,94:1 / 1:1 14,94:1 / 1:1 11,72:1 / 0,69:1 11,64:1/0,78:1 11,72:1 / 0,69:1 11,64:1/0,78:1 11,72:1 / 0,69:1 10,19:1 / 1:1 14,19:1 / 1:1 Constantmesh Constantmesh Synchromesh Constantmesh Synchromesh Constantmesh Synchromesh Synchromesh Synchromesh 3,077:1 3,077:1 4,571:1 4,143:1 4,833:1 4,833:1 5,333:1 3,583:1 4,333:1 315/80 R /80 R /80 R /80 R /80 R /80 R /80 R /80 R /80 R22.5 Radial Radial Radial Radial Radial Radial Radial Radial Radial FOCUS ON TRANSPORT 139
3 1844LS/36 DD 2641LS/33 DD 2646LS/33 DD 2654LS/33 DD 2658LS/33 HYP 2036S/ S/33 Overall Length Overall Width Overall Height Front Overhang Rear Overhang Wheelbase Bumper to Back of Cab Back of Cab to Centre Rear Axle Turning Radius (m) 7,6 8,0 8,0 8,0 8,0 7,45 8,0 Data (kg) Manufacturer s Gross Vehicle Manufacturer s Gross Combination Manufacturer s Front Axle Manufacturer s Rear Axle Permissible Maximum Vehicle Permissible Maximum Front Axle Permissible Maximum Rear Axle Unladen Front Axle Unladen Rear Axle Total Unladen Permissible Max Drawing Vehicle Capacity (cm 3 ) Max Power kw r/min 300 (408) 335 (450) 395 (537) 425 (580) 265 (360) Max Torque r/min G211-12/14,93 G281 12/14.93 G281-12/14,93 G281-12/14,93 No of Forward Gears High / Low Ratios 14,93:1 / 1:1 14,93:1 / 1:1 14,91:1 / 1:1 14,93:1 / 1:1 11,64:1 / 0,78:1 11,64:1 / 0,78:1 11,64:1 / 0,78:1 Synchromesh or Constantmesh Contstantmesh Contstantmesh Contstantmesh Contstantmesh Contstantmesh Contstantmesh Contstantmesh 2,846:1 3,077:1 3,077:1 3,077:1 3,583:1 4,143:1 4,143:1 brake + brake + Size and Ply Rating 315/80 R /80 R /80 R /80 R /65 R /80 R /80 R22.5 Radial or Crossply Radial Radial Radial Radial Radial Radial Radial 140 FOCUS ON TRANSPORT
4 3350S/ S/33 (AV) 2654L/45 HYP 3332/ / / K/51 8x4 Tipper / Mixer 1832A/45 F/C 3344A/45 6x6 F/C (SWA) ,0 8,0 9,9 9,9 9,9 9,9 10, , (537) 235 (320) 235 (320) G280-16/11,72 G240-16/11,72 G210 16/14 2 G240-16/11, ,64:1 / 0,78:1 11,72:1 / 0,69:1 11,64:1 / 0,78:1 11,64:1 / 0,78:1 11,64:1 / 0,78:1 11,64:1 / 0,78:1 11,72:1 / 0,69:1 14,2:1-0,83:1 11,72:1 / 0,69:1 Contstantmesh Contstantmesh Contstantmesh Contstantmesh Contstantmesh Contstantmesh Synchromesh Constantmesh Synchromesh 4,143:1 4,833:1 3,583:1 4,333:1 4,333:1 4,333:1 5,333:1 5,333:1 5,333:1 315/80 R /80 R /80 R /80 R /80 R /80 R /80 R /85 R20 14 R20 Radial Radial Radial Radial Radial Radial Radial Radial Radial FOCUS ON TRANSPORT 141
5 U4000 Single Cab U4000 U4000 Crew Cab U4000 U5000 Single Cab U5000 U5000 Crew Cab U5000 Overall Length Overall Width Overall Height Front Overhang Rear Overhang Wheelbase Bumper to Back of Cab Back of Cab to Centre Rear Axle Turning Radius (m) 14,5 14,5 16,3 16,3 Data (kg) Manufacturer s Gross Vehicle Manufacturer s Gross Combination Manufacturer s Front Axle Manufacturer s Rear Axle Permissible Maximum Vehicle Permissible Maximum Front Axle Permissible Maximum Rear Axle Unladen Front Axle Unladen Rear Axle Total Unladen Permissible Max Drawing Vehicle Capacity (cm 3 ) Max Power - kw r/min Max Torque - r/min UG 100 UG 100 UG 100 UG 100 No of Forward Gears High / Low Ratios 9,57:1 / 0,73:1 9,57:1 / 0,73:1 9,57:1 / 0,73:1 9,57:1 / 0,73:1 Synchromesh or Constantmesh Synchromesh Synchromesh Synchromesh Synchromesh 6,94:1 6,94:1 6,94:1 6,94:1 Size and Ply Rating 365/80 R20 365/80 R20 365/85 R20 365/85 R20 Radial or Crossply Radial Radial Radial Radial 142 FOCUS ON TRANSPORT
MT LWB CC Dimensions (mm) Overall Length Hino AT SWB
Dyna 300 614 SWB Hino 300 614 AT SWB 300 614 LWB 300 714 SWB 300 714 AT SWB 300 714 LWB 300 714 MT LWB CC Overall Length 4 690 4 710 4 710 5 965 6 120 6 120 6 735 6 735 Overall Width 1 695 1 695 1 695
More informationAtego Specifications. Dealer
Atego Specifications Dealer Please note: Changes may have been made to the product since the brochure went to press (01.06.2013). The manufacturer reserves the right to make changes to the design, form,
More informationTHE RIGHT TRUCK FOR AFRICA
THE RIGHT TRUCK FOR AFRICA STANDARD CAB WIDE CAB DESCRIPTION 1018 FC 1322 4X4 FC 1326 FC 1627 FC LWB 1627 FC LWB AT 1627 FC SLWB ENGINE Make and Model Hino JO5E - TC Hino J08E-YB Hino JO8E - UD J08E-WH
More informationActros - Specifications
Actros - Specifications Index Actros Cabs...2 Cab Drawings...3 Actros Engines...4 Transmissions...5 Chassis Frame...6 Truck Tractor...8 Freight Carrier... 10 Tipper and All Wheel Drive... 11 1 Actros
More informationCANTER LIFT FE4-130TF. *Images for illustrative purposes only
CANTER LIFT FE4-130TF *Images for illustrative purposes only Introducing the FUSO CANTER LIFT FE4-130TF Cab With its short-throw gearstick mounted on the dash and its elevated steering column, there s
More informationCayenne Cayenne Tiptronic S
9/5/2010 Technical Specs - - Layout / number of cylinders6 6 Displacement 3,598 cm³ 3,598 cm³ layout Front Front Power 220 kw (300 hp)220 kw (300 hp) Max. torque (Nm) at rpm 400 Nm 400 Nm at rpm 3,000
More informationHino 500 Wide Cab. Make and Model J08E-WH J08E-WH J08E-WH J08E-WH J08E-WH. 4 Stroke Compression Ignition Yes Yes Yes Yes Yes
WIDE Cab The Right Truck for Africa Engine 1627 Make and Model J08E-WH J08E-WH J08E-WH J08E-WH J08E-WH 4 Stroke Compression Ignition Yes Yes Yes Yes Yes Aspiration Turbo-Intercooled Turbo-Intercooled Turbo-Intercooled
More informationTECHNICAL SPECIFICATIONS - New Boxer L1 Summary - 09/2016
TECHNICAL SPECIFICATIONS - New Boxer L1 S&S S&S S&S Versions : L1H1 - L1H2 GVW : 2800 / 3000 / 3300 / 3500 (5) / 4000 (5) DW10FU Euro6 DW10FU Euro6 DW10FU Euro6 DW10FU Euro6 DW10FU Euro6 DW10FU Euro6 Max.
More informationTHE HINO 700 DESIGNED TO
THE HINO 00 DESIGNED TO KEEP YOU UCKING NO MATTER HOW LONG AND HARD THE ROAD IS AHEAD, YOU CAN REST ASSURED THAT THE HINO 00 RANGE, WITH PROVEN TECHNOGY AND RELIABILITY BEYOND QUESTION, WILL BE WITH YOU
More information35C15V (E4) ( EURO 4 - Transversal leaf )
TECHNICAL DESCRIPTION ( EURO 4 - Transversal leaf ) The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any time.
More information50C15V (E4) ( EURO 4 )
TECHNICAL DESCRIPTION 50C15V (E) ( EURO ) The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any time. 1 Gearbox
More information35C15 (E4) ( EURO 4 - Torsion bar )
TECHNICAL DESCRIPTION 5C5 (E4) ( EURO 4 - Torsion bar ) The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any
More information50C15 (E4) ( EURO 4 )
TECHNICAL DESCRIPTION 50C15 (E) ( EURO ) The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any time. 1 50C15 (E)
More information65C18 (E4) ( EURO 4 )
TECHNICAL DESCRIPTION 6C18 (E4) ( EURO 4 ) The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any time. 1 Gearbox
More informationFORD TRUCKS 4142M EURO6
FORD TRUCKS 4142M EURO6 3292 2540 1490 2050 3050 1330 940 5100 8860 Basic Features Vehicle Type Mixer Emission Euro 6 Cabin Type 8x4 Day Cab Wheelbase (mm) 5100 Engine Type Ecotorq 12,7 liters Displacement
More informationBODYWORK CALCULATIONS 2
Table of content BODYWORK CALCULATIONS...2 PRINCIPLES OF CALCULATION...3 OPTIMIZING LOAD...6 EXAMPLE OF CALCULATION...7 Example 1 4X2 Tractor with two axles...7 Example 2 6X4 Tractor with three axles...9
More informationHino.co.za. A Toyota Group Company
Hino.co.za A Toyota Group Company SPECIFICATIONS HINO 500 BELOW 16 000KG GVM FC AT S S AT AT S S AT Dimensions (mm) BBC - rear structure 1770 2060 2060 2060 2110 2110 2110 2110 2110 2110 2110 2110 2110
More informationEvery truck range has a driving force
Every truck range has a driving force The Super Great (FP/FV) extra heavy-duty series is indeed a force to be reckoned with. Now, world-proven heavy-truck technology is available in 4x2 and 6x4 configurations
More information35S12 (E4) ( EURO 4 )
TECHNICAL DESCRIPTION 5S (E4) ( EURO 4 ) The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any time. 5S (E4) Gearbox
More informationFORD TRUCKS 2533D LR EURO6
FORD TRUCKS 2533D LR EURO6 3120 2540 1500 3800 1320 1330 7950 Basic Features Vehicle Type Light Tipper 6x2 Emission Euro 6 Cabin Type Low Roof Sleeper Cab Wheelbase (mm) 3800 Engine Type Ecotorq 9 liters
More information35C12 (E4) ( EURO 4 - Transversal leaf )
TECHNICAL DESCRIPTION 35C (E) ( EURO - Transversal leaf ) The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any
More informationConversion Guideline Opel Movano [ X62 ]
Conversion Guideline Opel Movano [ X62 ] Part 1 - Chapter 1-23 Edition: September 2014 GME Engineering Special Vehicle Development / Light Commercial Vehicles Rüsselsheim / Germany CONTENTS Conversion
More informationC Front overhang. D Rear overhang. H Front axle to front of body. K Overall height to top of cab, unladen. L Frame height at end of frame, unladen
Gearbox 6S-400OD Wheelbase Cab Drive Vcb 3050 LST LEFT HAND DRIVE WAEE1IA1 3400 LST LEFT HAND DRIVE WAEE1IB1 30/07/007 DIMENSIONS (mm) (35S18W4 LST) A Wheelbase B Overall length C Front overhang D Rear
More informationpk trucks holland Quotation Mercedes Benz Actros S 6X4 Actros 3 Driver cabin: Baumuster:
Quotation Mercedes Benz Actros 3 3850 S 6X4 Actros 3 Vehicle type: 3850 S Drivetrain: 6X4 Baumuster: 93416112 Vehicle type: Semitrailer tractor Driver cabin: L-Cab Engine power: 370 kw (503 PS) Wheelbase:
More informationWheelbase mm Maximum Weight (registered) Total (GVW) Kg Payload (C) Kg Kerb Weight total Kg 5125
Renault Midlum D- Range D 18 WEIGHTS Maximum Weight (registered) Total (GVW) Kg 18000 Payload (C) Kg 12875 Kerb Weight total Kg 5125 Chassis cab kerb weight Front axles (Liftable axle down) Kg 3396 Rear
More informationMH260E30Y/PS-RSU ( CURSOR (RSU) (E30) )
N. : DT 610 04 TECHNICAL DESCRIPTIONS MH60E30Y/PS-RSU ( CURSOR + 0375 (RSU)+ 06494 (E30) ) The information in this literature is intended to be of a general nature only. Iveco reserve the right to modify
More informationTHE NEW HINO 700 DESIGNED TO KEEP YOU TRUCKING
THE NEW HINO 700 DESIGNED TO KEEP YOU TRUCKING NO MATTER HOW LONG AND HARD THE ROAD AHEAD IS, YOU CAN REST ASSURED THAT THE HINO 700 SERIES, WITH PROVEN TECHNOLOGY AND RELIABILITY BEYOND QUESTION, WILL
More informationTrucks (6x4) I 6520 (6x4) I (6x6) I (8x4)
Trucks Extra Heavy Duty 65115 (6x4) I 65 (6x4) I 65222 (6x6) I 651 (8x4) www.bellequipment.com l 1 BELL and KAMAZ Tough and reliable machinery distributed and supported by an organisation with an undeniable
More informationMargaritis Trucks GmbH
Mercedes Benz Actros 3540 B 8X4 with Stetter concrete mixer AM 10 FHC-BL Model: Mercedes-Benz Actros 3 Vehicle type: 3240 B Drivetrain: 8X4/4 Modell: 93330412 Vehicle type: Truck mixer chassis Driver cabin:
More informationTXV - Characteristics
TXV - Characteristics TXV pumps are available in 11 models from to 150 cc/rev maximum displacement. Pump reference Direction of rotation Maximum displac. (1) Max. operating pressure Max. peak pressure
More informationNEW 4 ALL TRACKS, 4 ALL CONDITIONS.
NEW 4 ALL TRACKS, 4 ALL CONDITIONS. A FULL LINE-UP OF GO-ANYWHERE VEHICLES UNLIMITED VERSATILITY, EXTREME ROBUSTNESS AND ULTIMATE DRIVING COMFORT IN EVERY MISSION The extensive line-up of the Daily 4x4
More informationSPECIFICATIONS. 13,000 Rear : 11R PR
SPECIFICATIONS HINO 700 Series 8x4, Truck Chassis Spec. No. SS-FY304 Drawing No. CDRFY311 - RHD - 410 PS (Euro-4) - 35.0 ton GVMR RATINGS & AXLE LOAD LIMIT (kg) ( )??Maker design GVM Front Axle Rear Axle
More informationtime for smarter solutions scania heavy tipper
time for smarter solutions scania heavy tipper We provide a framework of people, methods, tools and information to increase productivity, reduce costs and manage risks better in mining operations. 2 Scania
More informationACTIVITIES LOCAL AUTHORITIES. renault-trucks.com
ACTIVITIES renault-trucks.com 3 A TRUCK SHOULD NEVER LET YOU DOWN 1. WASTE COLLECTION A TRUCK MUST BE ABLE TO EASILY REACH CITY CENTRES P 04 2. ROAD MAINTENANCE ROAD NETWORK CLEANLINESS AND VIABILITY DEPENDS
More informationMANISTEE COUNTY ROAD COMMISSION 2019 TANDEM AXLE TRUCK SPECIFICATIONS AND BID REQUIREMENTS (ALTERNATE BID) January 4, 2018
GENERAL 1. The following minimum specifications are for a tandem axle truck (conventional cab and chassis with an engine and transmission). 2. The truck shall be the manufacturer s current model under
More informationHINO 300 Series 4x2, Truck Chassis
SPECIFICATIONS HINO 300 Series 4x2, Truck Chassis Spec. No. SS-XZ356A Drawing No. CDRXZ348/349 - RHD - 110 kw (Euro-4) - 6.5 ton GVMR - Wide Cab RATINGS & AXLE LOAD LIMIT (kg) GVM GCM Front Axle Rear Axle
More informationMH 20/25-4 T. Buggie. Compact trucks with 4 wheel drive. Capacity 2000 kg and 2500 kg. Overall height: less than 2 metres. Semi-Rough-Terrain
MH 20/25-4 T Buggie Compact trucks with 4 wheel drive Capacity 2000 kg and 2500 kg Overall height: less than 2 metres Semi-Rough-Terrain compact models with 4 wheel drive The ergonomically designed driver
More informationAtlas Copco. T3W and T3WDH Water Well Drills
Atlas Copco T3W and T3WDH Water Well Drills T3W and T3WDH IT S ALL ABOUT DOING MORE FOR LESS That s why Atlas Copco released new versions of the T3W and T3WDH. Much has remained the same. However, the
More information430D/430D IT Backhoe Loader Tires Tubeless, nylon, loader-design tire sets.
D/D IT Backhoe Loader Tires Tubeless, nylon, loader-design tire sets. Ply Type Size Rating WD Bias Front L x Rear 9. x WD Bias Front./ x Rear 9. x WD Radial Front / x R radial Rear 9. x radial WD Combination
More informationNEOPLAN Tourliner. A. Technical data: NEOPLAN Tourliner (P21)
NEOPLAN Tourliner A. Technical data: NEOPLAN Tourliner (P21) Vehicle dimensions Length 12,000 mm Width 2,550 mm Overall height 3,800 mm Wheelbase 6,060 mm Overhang, front 2,680 mm Overhang, rear 3,260
More informationSCHOPF F396C. Aircraft Towing Tractor TECHNICAL DATA & CONFIGURATION
SCHOPF F396C Aircraft Towing Tractor TECHNICAL DATA & CONFIGURATION TECHNICAL DATA Operating weights 45,000 / 50,000 / 55,000 / 60,000 / 70,000 kg Tyres, front + rear 16.00 x 25 18.00 x 25 (70,000 kg)
More informationNEV ABLE REDUCER CORONET REDUCER FOR SERVO MOTOR
NEV 83 Right Angle Shaft Model & Type Symbol 85 Performance Table Right Angle Shaft Reduction ratio 1/3 1/5 1/9 1/15 1/27 1/45 1/75 1/105 Type Output shaft speed Rated Max. instantaneous output torque
More information4. Specifications. BMW X5 xdrive40e.
Page 15 4. Specifications. BMW X5 xdrive4e. BMW X5 xdrive4e Body No. of doors/seats 5 / 5 Length/width/height 1) (unladen) mm 4886 / 1938 / 1762 Wheelbase mm 2933 Track, front/rear mm 1644 / 16 Turning
More informationTransporter Cab Range Commercial Vehicles
Cab Range Commercial Vehicles Cab Range Specifications. X = standard O = optional - = not available Cab Range Specification Single Cab 75KW 75kW 103kW 4MOTION 2.0 BiTDI 132kW DSG Engine Cylinders 4 4
More informationCONTENTS AT Key Dimensions. Load charts. Technical description. Crane dimensions... 4, 5 Range diagram... 6 Area of operation...
CONTENTS Page: Key........................................................................................... 3 Dimensions Crane dimensions........................................................................
More informationCaddy Crew Bus. Commercial Vehicles
Commercial Vehicles Specifications. Specification SWB Engine Cylinders 4 4 4 Capacity (cm 3 ) 1598 1598 1968 utput (kw @ r/min) 81 @ 5800 81 @ 5800 81 @ 4200 Torque (Nm @ r/min) 155 @ 3800-4000 155 @
More informationLIFT TRUCK TECHNOLOGY. Nexen Libero FGL20-25 (2.0t - 2.5t) LPG Fork Lift. Specification Sheet.
LIFT TRUCK TECHNOLOGY Nexen Libero FGL20-25 (2.0t - 2.5t) LPG Fork Lift Specification Sheet www.nexenlifttrucks.com OTHER ENGINE PERFORMANCE DIMENSIONS WHEELS & TYRES WEIGHTS CHARACTERISTICS NEXEN LIBERO
More informationKONECRANES LIFTACE REACH STACKERS
HIGH STANDARD LIFT TRUCKS KONECRANES LIFTACE REACH STACKERS 2 KONECRANES LIFTACE REACH STACKERS consist of the wellknown TFC models and the R models launched in April 2015 under the Liftace name. Built
More informationConversion Guideline Opel Movano [ X62 ]
Conversion Guideline Opel Movano [ X62 ] Part 3 - Chapter 53-79 and 142-148 Edition: August 2013 GME Engineering Special Vehicle Development / Light Commercial Vehicles Rüsselsheim / Germany CONTENTS Conversion
More informationTough is what tough does.
Tough is what tough does. The Next Generation Mahindra Pik Up has been designed to be strong and practical, with all the power you need to get the job done. Built in India to withstand the harsh conditions
More informationTHE NEW MAN TGE. Technical data. Valid from October 1st 2017.
THE NEW MAN TGE. Technical data. Valid from October 1st 2017. DRIVELINE. 2.0 l 75 kw 2.0 l 90 kw 2.0 l 103 kw 2.0 l 130 kw Displacement [cm³] 1,968 1,968 1,968 1,968 Number of cylinders 4 4 4 4 max. power
More information4-cyl. petrol engine TSI ACT BMT Effective displacement cm³ 1,395 Valves per cylinder 4. kw (PS) at rpm Nm at rpm
Passat 1.4 TSI ACT BMT 4-cyl. petrol engine TSI ACT BMT Effective displacement cm³ 1,395 at Direct injection / Turbocharger with single scroll turbine 110 (150) 5,000-6,000 250 / 1,500-3,000 Acceleration
More informationTransporter Panel Van Commercial Vehicles
Commercial Vehicles Specifications. X = standard O = optional - = not available Specification Sport Engine Cylinders 4 4 4 4 Capacity (cm 3 ) 1968 1968 1968 1968 Output (kw @ r/min) 75 @ 3000-3750 75 @
More informationTECHNICAL DATA SHEET
/ / / TECHNICAL DATA SHEET www.manitou.com M26-2 / M26-2H M26-4 Max. capacity 2 kg at mm CDG height (standard mast) 3.70 m Max. lifting height 7.00 m Unladen time 0.5 m/s Lowering 0.5 m/s Tyres Forward
More informationRear end adaptations. Adapted length of rear overhang. Variant codes for some commonly occurring dimensions
Adapted length of rear overhang Adapted length of rear overhang The rear overhang can be ordered from the factory in length increments of 10 mm between the limit values 780 mm and 5,200 mm (see illustration).
More informationFORD TRUCKS 1833 LR EURO6
FORD TRUCKS 1833 LR EURO6 3140 2540 1500 4750 2440 8690 Basic Features Vehicle Type Light Road Truck 4x2 Emission Euro 6 Cabin Type Sleeper Cab Wheelbase (mm) 4750 Engine Type Ecotorq 9 liters Displacement
More informationThe time has come for the FUSO Canter LIFT. A truck with innovations designed to give your business a lift.
The time has come for the FUSO Canter LIFT. A truck with innovations designed to give your business a lift. The two pedal Duonic Automated Mechanical Transmission gives you the flexibility of an automatic
More informationCaddy Panel Van. Commercial Vehicles
Commercial Vehicles X = standard O = optional - = not available Specification 1.6i 81kW Engine Cylinders 4 4 Capacity (cm 3 ) 1598 1968 Output (kw @ r/min) 81 @ 5800 81 @ 4200 Torque (Nm @ r/min) 155
More informationThe Unimog. Technical information U 216 to U 530. DAIML_17_0690_ENG-02_UGE-Technics_297x210_RZ.indd 1
The Unimog. Technical information U 6 to U 50. DAIML_7_0690_ENG-0_UGE-Technics_97x0_RZ.indd 0.0.7 6:57 Technical drawings of the Unimog implement carrier B M L K I J C A G H G N N E F D Model variant 405.05,
More informationThe new Unimog with outstanding off-road mobility. Speaker: Wulf Aurich I Product Manager Unimog Mercedes-Benz Special Trucks
The new Unimog with outstanding off-road mobility. Speaker: Wulf Aurich I Product Manager Unimog Mercedes-Benz Special Trucks The new Unimog integrates leading truck technology tested in large-scale production
More informationMH260E24Y/TN ( CURSOR )
N. : DT 60 00 TECHNICAL DESCRIPTIONS MH60E4Y/TN ( CURSOR ) The information in this literature is intended to be of a general nature only. Iveco reserve the right to modify or change specification at any
More informationMANITOU MANITOU MANITOU MANITOU
Technical book MSI / MH Range 2 to 5 tons Semi industrial IC forklifts MSI : 2000-3 Performances Dimensions Tyres, frame Weight Specifications TECHNICA SPECS 1.1 Manufacturer 1.2 Model MSI 20 MSI 25 MSI
More information47,000 Ib ( kg) maximum lifting capacity. 101 (30.78 m) maximum sheave height. 144 (43.89 m) maximum sheave height with (
Boom Truck Crane TRUCK CRANE FEATURES 47,000 Ib (21 319 kg) maximum lifting capacity 101 (30.78 m) maximum sheave height 144 (43.89 m) maximum sheave height with 26-44 (7.92-13.41 m) jib 29-92 (8.84-28.04
More informationP 360 and P 400 Euro 5 added to range Scania P-series available with bigger engines
PRESS info P09401EN / Per-Erik Nordström 30 April 2009 P 360 and P 400 Euro 5 added to range Scania P-series available with bigger engines Together, Scania s P-series and the new high-torque 13-litre EGR
More informationTruck Chassis Weights & Dimensions :
Truck Chassis Weights & Dimensions : KERAX 350.34 6X4 HD-WKP GVW Max. Body Length (W) Min. Body Length (W) Total Payload Chassis Cab Weight Front Load Distribution Rear Load Distribution Front Axle Max.
More informationCHAPTER 2 : ESSENTIAL CHARACTERISTICS OF THE VEHICLE AND ENGINE AND INFORMATION CONCERNING THE CONDUCT OF TESTS
CHAPTER 2 : ESSENTIAL CHARACTERISTICS OF THE VEHICLE AND ENGINE AND INFORMATION CONCERNING THE CONDUCT OF TESTS 1.0 Description of the Vehicle - 1.1 Trade name or mark of the vehicle - 1.2 Vehicle type
More informationCaddy Trendline and Alltrack. Commercial Vehicles
Caddy Trendline and Alltrack Commercial Vehicles Caddy Trendline and Alltrack. X = standard O = optional - = not available Caddy Trendline and Alltrack Specification Caddy Trendline Engine Cylinders 4
More informationDATA PD LS1..., LS2..., LS3... Lift Axle Valves - Pneumatic. P r o d u c t. Function. Technical Features
C o m m e r c i a l V e h i c l e S y s t e m s P r o d u c t DATA PD-503-200 Function Pneumatic Lift Axle Control Valves are used for the semi-automatic or fully automatic control of air suspended lift
More informationTo learn more about this model, call or visit giuffre.com today! GIUFFRE.COM. 34,000 Ib ( kg) maximum lifting capacity
Boom Truck Crane TRUCK CRANE FEATURES 34,000 Ib (13 607 kg) maximum lifting capacity 80 (24.38 m) maximum sheave height 120 (36.57 m) maximum sheave height with 24-40 (7.31-12.19 m) jib 27-70 (82.30-21.34
More informationTechnical specifications
Technical specifications series 1.5-3.2 t eco X world wide network 24/7 support standard SPECIFICATIONS September 2013 CHARACTERISTICS WEIGHTS WHEELS & TIRES DIMENSIONS PERFORMANCE DRIVE OTHERS Counterbalance
More informationKombi Specifications. X = standard O = optional - = not available
Specifications. X = standard O = optional - = not available Specification 75kW Trendline Plus TDI 103kW Engine Cylinders 4 4 4 4 Capacity (cm 3 ) 1968 1968 1968 1968 Output (kw @ r/min) 75 @ 3000-3750
More informationAxle load calculations
All types of transportation work using trucks require the truck chassis to be supplemented by some form of bodywork. The aim of axle load calculations is to optimise the chassis and bodywork location.
More informationKombi Trendline 2.0 TDI 75kW SWB. Cylinders Output r/min)
New Specifications Engine Cylinders 4 4 4 4 4 Capacity (cm 3 ) 1968 1968 1968 1968 1968 Output (kw @ r/min) 75 @ 3000-3750 103 @ 3500 103 @ 3500 103 @ 3500 103 @ 3500 Torque (Nm @ r/min) 250 @ 1500-2500
More informationSPECIFICATIONS MANUAL
SUBJECT TO CHANGE FOR PRODUCT IMPROVEMENT TATA DAEWOO HEAVY DUTY TRUCK SPECIFICATIONS MANUAL MODEL NAME : 4x2 Wing body Truck MODEL CODE : June, 2014. GENERAL DIAGRAM DIMENSIONS (mm) Overall Length OL
More informationSPECIFICATIONS. 6x4, Truck Chassis. Front: 315/80R /153 Rear : 295/80R /150
SPECIFICATIONS HINO 700 Series 6x4, Truck Chassis Spec. No. SS-FS314 Drawing No. CDRFS340 - RHD - 380 PS (Euro-4) - 28.3 ton GVMR RATINGS & AXLE LOAD LIMIT (kg) ( ) Maker design GVM Front Axle Rear Axle
More informationScania at Bauma China 2010: Fit for hard work wide choice, solid support
PRESS info P10100EN / Per-Erik Nordström Jan 2010 Scania at Bauma China 2010: Fit for hard work wide choice, solid support Scania is the perfect choice when reliability, strength, robustness, and uptime
More informationTELETRUK TLT30D 4x4 / TLT35D 4x4
ENGINE FUEL TYPE: DIESEL LIFT CAPACITY: UP TO 3.5 TONNES C A Q D B L K M E O P J H N G F STATIC DIMENSIONS Model TLT30D 4x4 TLT35D 4x4 A Lift height mm 4000 4350 B Free lift (standard) mm 1560 1350 C Height
More informationEC360CHR High Reach Demolition
Volvo Excavators DEMOLITION EC210C -- EC700B EC700C STANDARD DEMOLITION EC360CHR // EC700BHR ULTRA HIGH REACH DEMOLITION EC210C - EC700C Standard Demolition Engine power, gross : 110 kw - 316 kw 148 hp
More informationRotary Telescopic Handlers. Product Range
Rotary Telescopic Handlers Product Range Turn your world around with 360 rotation! n Rotate at will Bobcat offers a new level of versatility and efficiency with the range of rotating telescopic handlers.
More informationDriver s Suspension Seat (EX4) GVM 4,500kg GCM 8,000kg. Smart Key Entry with Security System (EX6) GVM 6,500kg GCM 10,000kg
KEY FEATURES KEY SPECIFICATIONS Driver s Suspension Seat (EX4) GVM 4,500kg GCM 8,000kg Smart Key Entry with Security System (EX6) GVM 6,500kg GCM 10,000kg Four Wheel Disc Brakes Wheelbase SWB 2,850mm MWB
More informationCreated on October 7, :58 AM. Technical sheet MLT Telehandlers
Created on October 7, 2016 6:58 AM Technical sheet Telehandlers Capacities Max. capacity Max. lifting height Max. outreach Reach at max. height Breakout force with bucket Weight and dimensions metric 3300
More informationFUSO A Daimler Group Brand model year
FUSO A Daimler Group Brand 8.55t GVW DUONIC Transmission 2014 model year 2014 model year Duonic transmission 8.55t GVW 4x2 Dimensions 9C15 9C18 A. Wheelbase mm 3400 3400 3850 4300 4750 B. Front Overhang
More informationThe CLARK GTS is fitted with a powerful and economical diesel engine or LPG engine.
Diesel / LG The CLARK GTS is fitted with a powerful and economical diesel engine or LG engine. Automotive-style ergonomics Tiltable steering column The tiltable steering column can be adjusted to the driver's
More informationSpecifications. The new BMW i3.
Page 1 Specifications. The new BMW i3. Body Construction BMW i3 CFRP passenger cell, aluminium chassis BMW i3 with range extender No of doors / seats 5 / 4 5 / 4 Length mm 4011 4011 Width mm 1775 1775
More informationrenault-trucks.com construction range C
renault-trucks.com construction range C 2 CONSTRUCTION RANGE 1. robustness STRONG ON ROBUSTNESS p 03 RUGGED TRUCKS FOR CHALLENGING APPLICATIONS p 04 AT YOUR SERVICE, ANY TIMe p 06 2. PROFITABILITY STRONG
More informationVehicle Summary. Adverse Data CAUTION. Plate Change. USED VEHICLES AutoCheck Report KP11VLT WVGZZZ7PZBD045248
Vehicle Summary CAUTION Colour BLACK NOT STOLEN NO HIGH RISK NO FINANCE Body type ESTATE Engine no. NO ABI CONDITION NOT SCRAPPED PLATE CHANGE BHP 236.6 Year of manufacture 2011 NO EXPORT NO IMPORT NO
More informationCreated on October 7, :28 PM. Technical sheet MLT PS+ Telehandlers
Technical sheet Telehandlers Created on October 7, 2016 12:28 PM Capacities Max. capacity Max. lifting height Max. outreach Reach at max. height Breakout force with bucket Weight and dimensions metric
More informationCOMPACT LOADERS P HP P HP P HP P HP
COMPACT LOADERS P126 26 HP P260 26 HP P330 33 HP P510 51 HP MANUFACTURED MANUFACTURED 2 PICHON 40 YEARS OF EXPERIENCE AT YOUR SERVICE PICHON KNOW-HOW For 40 years now, PICHON has been the partner of many
More informationCreated on October 7, :57 AM. Technical sheet MLT PS+ Telehandlers
Technical sheet Telehandlers Created on October 7, 2016 6:57 AM Capacities Max. capacity Max. lifting height Max. outreach Reach at max. height Breakout force with bucket Weight and dimensions metric 3500
More informationHigh Capacity Forklift Trucks AL WALID EQUIPMENT RENTAL LLC H16-18XM-12, H16-18XMS mm
Contact Number : +971 50-2174706 AL WALID EQUIPMENT RENTAL LLC www.walideqp.com High Capacity Forklift Trucks H16-18XM-12, H16-18XMS-12 16 000 18 000 kg @ 1200 mm Built on Experience H16-18XM(S) Development
More informationCOMBiLiFT C2500-C3000. three machines in one. Customised Handling Solution. Counterbalance Forklift > Aisle Truck > Side Loader
COMBiLiFT ff C2500-C3000 Customised Handling Solution three machines in one Counterbalance Forklift > Aisle Truck > Side Loader specifications Model C2500-C3000 REF DESCRIPTION C2500 C3000 1a Standard
More informationSTRONG PARTNERS. TOUGH TRUCKS. TM HIGH CAPACITY FORKLIFT TRUCKS H8-12XM-6, H13-16XM mm STAGE IIIB
STRONG PARTNERS. TOUGH TRUCKS. TM HIGH CAPACITY FORKLIFT TRUCKS H812XM6, H1316XM6 STAGE IIIB 8 16 kg @ 6mm H816XM6 DISTINGUISHING MARKS 1.1 Manufacturer 1.2 Manufacturer s type designation 1.3 Drive: electric
More informationFUSO A Daimler Group Brand model year
FUSO A Daimler Group Brand 3.5t GVW DUONIC transmission 2014 model year 2014 model year Duonic transmission 3.5t GVW 4x2 Dimensions 3C13 3C15 A. Wheelbase mm 2500 2800 3400 3850 2500 2800 3400 3850 B.
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION MAN D0836 LOH70 (EEV) VOITH DIWA.5 / ZF EcoLife 2016. Technical specification IK 112N (EEV) A [mm] B [mm] C [mm] D [mm] E [mm] F [mm] G [mm] H [mm] J [mm] K [ ] L [ ] 12041 2525
More informationEQUIPMENT HIRE RATES RATES EFFECTIVE 1 ST JULY 2015 ALL RATES ARE GST EXCLUSIVE
S S KUBOTA KX-121-3 RUBBER TRACKED EXCAVATOR (4.5 TONNE) MODEL KX-121-3 Net power - 30.2 kw Digging Force - 1790 kgf Digging Depth - 3.5 m Safe Working Load - 460 kg Operating Weight - 4,100 kilograms
More informationDESIGNED FOR TOP PERFORMANCE
LX 14/50 TRIPLEX FREE LIFT DESIGNED FOR TOP PERFORMANCE LX TRIPLEX A machine designed to meet the needs of handling and logistics professionals. Apart from the typical LX series characteristics these models
More informationA Product of Hard Work ROUGH TERRAIN FORK LIFT
A Product of Hard Work ROUGH TERRAIN FORK LIFT Rough terrain fork lifts Lift capacities of 2.6 to 4 tonnes and lift heights from 3.6 to 6.70m 63kW (84hp) engine delivers powerful performance JCB Synchro
More informationTire Size 26.5 x 25 5' 5-1/2" (1661) 12' 2-1/4" (3715)
Dimensions 11' 13' 4" (64) TAILSWING 9' " (2997) OVER FENDERS 22' (66) FULL EXT 15' 9" (4801) MID EXT 9' 3-1/2" (2832) RET 9' 9-1/2" (2985) O/R A B C D E F G H 23.5 x 25 5' 4-1/4" (1631) 11' 11-1/2" (36)
More informationOFF-ROAD RANGE
OFF-ROAD RANGE INTRODUCING THE IVECO OFF-ROAD RANGE In many parts of New Zealand, you don t have to venture far from the city to find dirt roads, rocky tracks, steep mountain terrain, sandy beaches, muddy
More informationSchedule PART 1: PRELIMINARY
Roads and Maritime Services Class 1 Special Purpose Vehicles Notice 2014 I, Peter Duncan, Chief Executive Roads and Maritime Services (RMS), pursuant to Clause 12 of the Road Transport (Mass, Loading and
More information