INFLUENCE partition. Aluminium rounded door frame 4. Door frames with non-standard widths. Electric strike plates 4

Transcription

1 Nomenclature 208

2 SOMMARY INFLUENCE partition Range-i Channels and Electrical skirting board, aluminium Aluminium studs Aluminium corners i-nov/plein Edge to edge 2 i-7aluminium cover strips 2 i-9 Recessed joint 2 i FIL Vertical panels with thin recessed joint 2 Double wall partitions 2 Transom and glazing profiles 3 Glazing gaskets 3 i-nov/vitrè 3M system sticking glass end-to-end 3 Accessories to parapet certified partition 3 Rounded door Aluminium rounded door frame 4 Door frames with non-standard widths 4 Electric strike plates 4 Standard door with aluminium frame Solid Full Height Solid Full Height Single glazing above glazed base panel Single glazing above solid base panel 6 Double glazing full height 6 Double glazing full height with blind 6 Swinging and sliding to measure 6 Aluminum frame options 6 Square door frame Options 7 Square door frame Door frames with non-standard widths 7 7 Door accessories Clarit equipment for toughened glass door 8 Surface-mounted sliding rail kit 8 Accessories huisseries 8 Diagrams for INFLUENCE partitions Solid partition with cover strip 3 Solid partition edge to edge Semi-glazed partition 7 Glazed partition with cover strip 9 Glazed partition edge to edge 2 INFLUENCE frame with cover strip 23 Diagrams for ELANCE partitions Glazed edge to edge 22 Full height Elance frame 23

3 SOMMARY ELANCE partition Frame base E - Channel 9 Simple glazing decentered 9 Channel cover profile 9 E - Plinth 9 Skirting board cover 9 Channel gasket «E» 9 Channel angle bracket 9 Channel junction 9 Angle bracket 9 Glass wedge 9 End channel cover 9 Insert 9 Glazing Glazing gasket 9 String gasket 9 3M accessories 9 Door frame Vertical door frame simple glazing 0 Vertical door frame double glazing 0 Kit door transm leaf 0 Kit door transom 2 leaf 0 Groove cover 0 3 Hinges kit 0 Kit 2 axis swivel 0 Clarit lock 0 Kit semi-fixed clarit & lock 0 B-Twist hinge 0 Pull bar 0 Kit 2 axis swivel 0 Automatic plinth 0 Door closer recessed 0 Door closer cover groove 0 Swinging aluminum framed doors Single centered glazing Single singel sided glazing Double glazed Swinging with : lock, european + cylinder + stainless steel handle Swinging with : Roller lock Swinging semi-fixed 2 Kit swinging door on ending profile single glazing 2 Kit swinging door on ending profile double glazing 2 Alu-framed sliding doors Single centered glazing Sliding door single glazed centered 2 Sliding ending profile kit single glazing 2 Sliding ending profile kit double glazing 2 Kit sliding rail slice leaf 2 Kit sliding rail slice 2 leaf 2 Tooling Roll tool for Gasket insertion 2 Magnetic mouthpiece extension (lenght : 90 mm) 2

4 Nomenclature 208 INFLUENCE Range Channels and Electrical skirting board, aluminium length reference qty/box qty/film Deadlines: A = 3 days - B = 0 days - C = days - D = 20 days (upon receipt of the OC)- E on request. i-channel height 38, mm 3, A D, E D i CHANNEL PICTURE 3, E D ledge 38. mm PANEL SPACER 0, A D Raw channel connector Adjustement i CHANNEL 3, E D Used as upper channel (channel with deeper rebate), its heights giving more space when adjusting edge to edge Height 0 mm Glazing connector for E Galva adjustment channels To assemble and align adjustment channels CHANNEL GASKET 20, A Dark grey T9 SKIRTING BOARD FOR 3, A D INTEGRATED NETWORK DOUBLE ONE-PIECE PLINTH 3, E D SKIRTING BOARD HEIGHT 60 mm To fix the skirting boards to the ground, use a glazing profile or an end profile Compatible with swithching devices equal to Legrand "Mosaique 4" type (accept multiple devices), Arnoux "Logix 4" types or equivalent SKIRTING BOARD COVER 3, A D An earth connction is compusary for each piece of the network skirting Aluminium studs length reference qty/box qty/film S STUD,20-3 E Raw 3,0-33 A Raw i black clipping bar 2,60-32 A Raw 3, A Black i7 STUD 4, E E Plain or lacquered black finish 3, A A for anodized aluminium 2, A A black for anodized FOAM GASKET 43 X 6, A Black double material For acoustic reinforcement on against wall start with studs and joint cover CHANNEL ANGLE BRACKET A Galva For fixing studs to upper and lower channels ACOUSTICLIP 0, A Black for filling: To be placed at 600 mm between axis distance on all studs, angle profiles and spacers. placophonique BF3 - BF3 plaster panel To be placed in the channel, on spacers and solid transom wooden chipboard panels 2 mm Aluminium corners Lacquered length reference qty/box qty/film, E D RIGHT ANGLE CORNER 90 3, A D Lacquered finish 2, A D, E D CORNER POST 3, A D Lacquered finish 2, A D, E D CORNER PROFILE 3, A D Lacquered finish 2, A D HALF-MOON 3, A D Anodized or Lacquered finish For Start angles : to be clipsed on glazing profile or openend profile CHANNEL ANGLE BRACKET A Galva For fixing angles to upper and lower channels Aluminium corners Anodized length reference qty/box qty/film, E RIGHT ANGLE CORNER 90 3, A Anodized finish 2, A, E CORNER POST 3, A Anodized finish 2, A, E CORNER PROFILE 3, A Anodized finish 2, A

5 Nomenclature 208 INFLUENCE Range Finish i-nov/solid Edge to Edge Deadlines: A = 3 days - B = 0 days - C = days - D = 20 days (upon receipt of the OC)- E on request. Channels and Electrical skirting board, aluminium length reference qty/box qty/film i-nov SOLID STUD 3,0-233 A Raw Aluminium 2, A Raw Special profile for assembling panels edge to edge, to be place each,2 m in the channels Steel tab, -7-00B 0 A adhesive on one side Sold in complet Boxes screws and mouthpiece Needs for one 2600 mm height module : extremity module = 0 steel stabs ; intermediary modules = 20 steel Needs for one 3000 mm height module : extremity module = 2 steel stabs ; intermediary modules = 24 steel Knob wedge for panels E Black Needs for one 3000 mm height module : extremity module = 2 steel stabs ; intermediary modules = 24 steel stabs CHANNEL ANGLE BRACKET A Galva For upper and lower connection from the I-Novstuds or 48 mm metal studs to channels ACOUSTICLIP 0, A Black for filling: To be placed at 600 mm between axis distance on all studs, angle profiles and spacers. To be placed in the channel, on spacers and solid transom i-7 Finish with COVER STRIPS Aluminium cover strips length reference qty/box qty/film, E D i7 FLAT COVER STRIP 3, A D width 37 mm 2, A D OMEGA COVER STRIP 3, E D width 37 mm PVC ROD 3, E D for omega cover strip White Ral Clear Grey Ral Black Ral 900 FLAT SECTION 40 x 2 3, A D To glue CORNER PIECE 40 x 40 x 2 3, A D To glue i9 finish panels with recessed joint Accessories for i9 finish reference qty/box Partition with recessed joint To be used with wooden panels with a width of 6 or 9 mm BOTTOM S9 CLIP E Black LATE S9 CLIP E Black Finish vertical panels with thin recessed joint Accessories for i FIL finish length reference qty/box qty/film i FIL clips E Black 8 clips per panel i FIL gasket cord 0 x 0 6, E Black To be inserted in the grooving of the S stud Double-wall partitions -i Profiles for double-wall partitions length reference qty/box qty/film i ADAPTOR 3, A Raw For dubbing thickness mm, compatible with flat joint cover or omega i FOLD-OVER COVER STRIP 3, E D FLAT SECTION 40 x 2 3, A D To glue CORNER PIECE 40 x 40 x 2 3, A D To glue SIDE RAIL 3, E Raw 2

6 Nomenclature 208 INFLUENCE Range TRANSOM length reference qty/box qty/film Deadlines: A = 3 days - B = 0 days - C = days - D = 20 days (upon receipt of the OC)- E on request. i ONE-PIECE TRANSOM, A D 2, A D i CLIP-ON TRANSOM, A Raw 3, E Raw Mixed modules : middle and upper Transom - Doorframe Modules : Upper Doorframe Transom JUNCTION A Galva For attaching the transom Glazing profiles length reference qty/box qty/film SINGLE GLAZING X 3, A D Glass, thickness 6 to 0 mm 2, A D Laminated glass pane, 33/2 to /2, A D DOUBLE GLAZING X 3, A D Glass, 6 to 0 mm 2, A D Laminated glass pane, 33/2 to /2, A D SINGLE GLAZING Z 3, E D Glass, 2 mm or 66/2 DOUBLE GLAZING Z 3, E D Glass, thickness 2 mm or 66/2 Caution: If mounting one 0 mm or /2 glass pane, use one i-2 adhesive foam gasket + one inner gasket of mm i PARTITION ENDING PROFILE 3, A D Glazing gaskets length reference qty/box qty/film i-6 GLAZING GASKET 3, A Clear Grey For glass with a thickness of 6 mm or 33/2 S6/i-8 GLAZING GASKET 3, A Black For glass with a thickness of 8 mm or 44/2 i-0 GLAZING GASKET 3, E Dark grey For glass with a thickness of 0 mm or /2 i-2 ADHESIVE FOAM 30, E GASKET 7 X. mm Can also be used with 0 mm or /2 glass or on double glazing Z For glass with a thickness of 2 mm or 66/2 INNER GASKET, mm 2, E noir sans liseret For glass with a thickness of 0 mm or /2 Can only be used for 0 PLANE FOR GLASS -960 E 3M system length reference qty/box qty/film Sticking glass end-to-end VHB 3M foam tape 6, A roll Transparent double-sided Thickness 2 mm X width 6 mm 3M94 Primer Bottle 238 ml A Bottle Ensures secure adhesion of the foam tape between the two glass panels Industrial cleaner Bottle 200 ml A Bottle Spray Enables the edge to be cleaned before the etch primer is applied Primer applicator nozzle A Rechargeable Felt Facilitates application of the etch primer on the edges of the glass panes Accessories to parapet certified partition length reference qty/box qty/film FLAT STEEL STRIP 3 x 3 2,8-633 E Bored with 7 Ø 4, mm holes Guard Railing partition : reinforced by a S7 Stud for a single glazed full height module Scews for Flat steel strip 3,x9 mm 3, x 9 A E muschroom head Screws for Omega cover strip 4,2 x 32 A E Countersunk headtête fraisée Roll Adhesive tape New, for parapet partition certification in single glazing Edge to Edge NORBOND range A7200, E Thickness 2 mm Six Certificates for Parapet Partitions i7 Partition single glazing on solid lining i7 Partition solid full height i-nov Partition single glazing edge to edge i7 Partition single glazing under solid transom i7 Partition single glazing full height i7 Partition Double glazing under solid transom i7 Partition double glazing full height 3

7 Nomenclature 208 INFLUENCE Range Aluminium rounded door frame length reference qty/box qty/film Deadlines: A = 3 days - B = 0 days - C = days - D = 20 days (upon receipt of the OC)- E on request. Current Range S door frame Standard height 2040 mm SINGLE-LEAF WOODEN Standard height 2040 mm B D DOORS OR DOORS B D WITH ALUMINIUM A D A D B D Includes: Hinges, gaskets, brackets, strike plate DOUBLE-LEAF WOODEN B D DOORS OR DOORS WITH B D ALUMINIUM FRAME B D B D SINGLE-LEAF WOODEN Includes: Hinges, gaskets, brackets, strike plate DOORS WITH 3 m B D TRANSOM PANEL OR A D DOORS ALUMINIUM A D Includes: Hinges, gaskets, brackets, strike plate DOUBLE-LEAF B D WOODEN DOORS B D WITH 3 m TRANSOM B D PANEL OR DOORS WITH Includes: Hinges, gaskets, brackets, strike plate ALUMINIUM FRAME Standard height 2040 mm For glass door with maximum thickness of 8 mm SINGLE-LEAF B D CLARIT DOORS made A D of toughened glass A D Add the single-leaf Clarit door equipment DOUBLE-LEAF B D CLARIT DOORS made B D of toughened glass B D Add the single-leaf Clarit door equipment SINGLE-LEAF B D CLARIT DOORS made B D 3 ml TRANSOM PANEL B D Add the single-leaf Clarit door equipment DOUBLE-LEAF B D CLARIT DOORS made B D 3 ml TRANSOM PANEL B D Add the double-leaf Clarit door equipment Door frames with non-standard widths length reference qty/box SINGLE-LEAF FOR WOODEN DOOR AND DOOR WITH ALUMINIUM FRAME 0 a H B D made to measure Maximum height 3000 mm DOUBLE-LEAF FOR WOODEN DOOR 03 a H B D AND DOOR WITH ALUMINIUM FRAME Maximum height 3000 mm made to measure Electric strike plates Surplus value on frame (not including the frame). Clarify the opening of the door side Includes: Machined vertical door frame + Metalux G4 strike plate + wiring + faceplate ELECTRIC STRIKE SINGLE-LEAF G4 B PLATE KIT DOUBLE-LEAF G4 B with pulse Double-leaf To be added: Pull handle + half lever on door Includes: Machined vertical door frame + Metalux G7 strike plate + wiring + faceplate ELECTRIC STRIKE SINGLE-LEAF G7 B PLATE KIT with fail safe DOUBLE-LEAF G7 B To be added: Pull handle + half lever on door PULL HANDLE KIT and half handle B for electric strike plate B on door with aluminium frame only 4

8 Nomenclature 208 INFLUENCE Range Deadlines: A = 3 days - B = 0 days - C = days - D = 20 days (upon receipt of the OC)- E on request. Standard door with aluminium frame. The glazed sections are equipped with 33.2 laminated glass or 6mm toughened glass The solid sections are equipped with plasterboard with a thickness of 2 mm Choice of finishes in 8 colours, shown in the EKO 8 CORAMINE colour chart Solid Full Height width ref Opening ref semi-fixed box Anodized / White / Graphite New codification Semi-fixed Width Opening Semi-fixed Sliding For standard Door Heigth2040 mm N-Std Width < iP3x 4-i2Px 4-i3P6x C D SOLID iP37 4-i2P7 4-i3P67 C D FULL HEIGHT iP38 4-i2P8 4-i3P68 C D iP39 4-i2P9 4-i3P69 C D Max N-Std width 00 mm 4-iP3H 4-i2PH 4-i3P6H C D Out of standard = other widths max 030mm min 30 mm and or door height equal to or less than 2040 mm. N-Std Width < iP32x 4-i2P2x 4-i3P62x C D iP327 4-i2P27 4-i3P627 C D iP328 4-i2P28 4-i3P628 C D iP329 4-i2P29 4-i3P629 C D Non-standard Width 4-iP32H 4-i2P2H 4-i3P62H C D Height between 260 and 3000 mm N-Std Width < iP33x 4-i2P3x 4-i3P63x C D iP337 4-i2P37 4-i3P637 C D iP338 4-i2P38 4-i3P638 C D iP339 4-i2P39 4-i3P639 C D Non-standard Width 4-iP33H 4-i2P3H 4-i3P63H C D Equipment on opening leaf: Lock, European cylinder and handles + stainless steel roses Equipment on semi-fixed leaf: Door stile + top and bottom locks Equipment on sliding leaf: pull handle - low guide - door support for sliding rail The solid sections are equipped with plasterboard with a thickness of 2 mm Choice of finishes in 8 colours, shown in the EKO 8 CORAMINE colour chart Solid Full Height width ref semi-fixed ref semi-fixed box Anodized / White / Graphite Semi-fixed Width Opening Semi-fixed Sliding For standard Door Heigth2040 mm N-Std Width < iC3x 4-i2Cx 4-i3C6x C D SINGLE GLAZING iC37 4-i2C7 4-i3C67 C D FULL HEIGHT iC38 4-i2C8 4-i3C68 A / C / C D iC39 4-i2C9 4-i3C69 A / C / C D Max N-Std width 00 mm 4-iC3H 4-i2CH 4-i3C6H C D Out of standard = other widths max 030mm min 30 mm and or door height equal to or less than 2040 mm. N-Std Width < iC32x 4-i2C2x 4-i3C62x C D iC327 4-i2C27 4-i3C627 C D iC328 4-i2C28 4-i3C628 C D iC329 4-i2C29 4-i3C629 C D Non-standard Width 4-iC32H 4-i2C2H 4-i3C62H C D Height between 260 and 3000 mm N-Std Width < iC33x 4-i2C3x 4-i3C63x C D iC337 4-i2C37 4-i3C637 C D iC338 4-i2C38 4-i3C638 C D iC339 4-i2C39 4-i3C639 C D Non-standard Width 4-iC33H 4-i2C3H 4-i3C63H C D Equipment on opening leaf: Lock, European cylinder and handles + stainless steel roses Equipment on semi-fixed leaf: Door stile + top and bottom locks Equipment on sliding leaf: Bar Lock, European Cylindre and handle, stainless steel roses SINGLE GLAZING ABOVE GLAZED BASE PANEL width ref semi-fixed ref semi-fixed box Anodized / White / Graphite New codification Semi-fixed Width Opening Semi-fixed Sliding For standard Door Heigth2040 mm N-Std Width < iV3x 4-i2Vx 4-i3V6x C D SINGLE GLAZING iV37 4-i2V7 4-i3V67 C D GLAZED BASE PANEL iV38 4-i2V8 4-i3V68 C D iV39 4-i2V9 4-i3V69 C D Max N-Std width 00 mm 4-iV3H 4-i2VH 4-i3V6H C D Out of standard = other widths max 030mm min 30 mm and or door height equal to or less than 2040 mm. N-Std Width < iV32x 4-i2V2x 4-i3V62x C D iV327 4-i2V27 4-i3V627 C D iV328 4-i2V28 4-i3V628 C D iV329 4-i2V29 4-i3V629 C D Non-standard Width 4-iV32H 4-i2V2H 4-i3V62H C D Height between 260 and 3000 mm N-Std Width < iV33x 4-i2V3x 4-i3V63x C D iV337 4-i2V37 4-i3V637 C D iV338 4-i2V38 4-i3V638 C D iV339 4-i2V39 4-i3V639 C D Non-standard Width 4-iV33H 4-i2V3H 4-i3V63H C D Equipment on opening leaf: Lock, European cylinder and handles + stainless steel roses Equipment on semi-fixed leaf: Door stile + top and bottom locks Equipment on sliding leaf: Bar Lock, European Cylindre and handle, stainless steel roses

9 Nomenclature 208 Deadlines: A = 3 days - B = 0 days - C = days - D = 20 days (upon receipt of the OC)- E on request. SINGLE GLAZING ABOVE SOLID BASE PANEL width ref semi-fixed ref semi-fixed box Anodized / White / Graphite New codification Semi-fixed Width Opening Semi-fixed Sliding For standard Door Heigth2040 mm N-Std Width < iA3x 4-i2Ax 4-i3A6x C D SINGLE GLAZING iA37 4-i2A7 4-i3A67 C D FULL HEIGHT iA38 4-i2A8 4-i3A68 B / C / C D iA39 4-i2A9 4-i3A69 B / C / C D Max N-Std width 00 mm 4-iA3H 4-i2AH 4-i3A6H C D Out of standard = other widths max 030mm min 30 mm and or door height equal to or less than 2040 mm. N-Std Width < iA32x 4-i2A2x 4-i3A62x C D iA327 4-i2A27 4-i3A627 C D iA328 4-i2A28 4-i3A628 C D iA329 4-i2A29 4-i3A629 C D Non-standard Width 4-iA32H 4-i2A2H 4-i3A62H C D Height between 260 and 3000 mm N-Std Width < iA33x 4-i2A3x 4-i3A63x C D iA337 4-i2A37 4-i3A637 C D iA338 4-i2A38 4-i3A638 C D iA339 4-i2A39 4-i3A639 C D Non-standard Width 4-iA33H 4-i2A3H 4-i3A63H C D Equipment on opening leaf: Lock, European cylinder and handles + stainless steel roses Equipment on semi-fixed leaf: Door stile + top and bottom locks Equipment on sliding leaf: Bar Lock, European Cylindre and handle, stainless steel roses The solid sections are equipped with plasterboard with a thickness of 2 mm Choice of finishes in 8 colours, shown in the EKO 8 CORAMINE colour chart DOUBLE GLAZING FULL HEIGHT width ref semi-fixed ref semi-fixed box Anodized / White / Graphite New codification Semi-fixed Width Opening Semi-fixed For standard Door Heigth2040 mm N-Std Width < iD3x 4-i2Dx C D DOUBLE GLAZING iD37 4-i2D7 C D FULL HEIGHT iD38 4-i2D8 B / C D iD39 4-i2D9 B / C D Max N-Std width 00 mm 4-iD3H 4-i2DH C D Out of standard = other widths max 030mm min 30 mm and or door height equal to or less than 2040 mm. N-Std Width < iD32x 4-i2D2x C D iD327 4-i2D27 C D iD328 4-i2D28 C D iD329 4-i2D29 C D Non-standard Width 4-iD32H 4-i2D2H C D Equipment on opening leaf: Lock, European cylinder and handles + stainless steel roses Equipment on semi-fixed leaf: Door stile + top and bottom locks Equipment on sliding leaf: Bar Lock, European Cylindre and handle, stainless steel roses Height between 260 and 3000 mm N-Std Width < iD33x 4-i2D3x C D iD337 4-i2D37 C D iD338 4-i2D38 C D iD339 4-i2D39 C D Non-standard Width 4-iD33H 4-i2D3H C D DOUBLE GLAZING FULL HEIGHT WITH BLIND width ref semi-fixed ref semi-fixed box Anodized / White / Graphite New codification Semi-fixed Width Opening Semi-fixed For standard Door Heigth2040 mm N-Std Width < iS3x 4-i2Sx C D DOUBLE GLAZING iS37 4-i2S7 C D FULL HEIGHT iS38 4-i2S8 C D WITH BLIND iS39 4-i2S9 C D Max N-Std width 00 mm 4-iS3H 4-i2SH C D Out of standard = other widths max 030mm min 30 mm and or door height equal to or less than 2040 mm. N-Std Width < iS32x 4-i2S2x C D iS327 4-i2S27 C D iS328 4-i2S28 C D iS329 4-i2S29 C D Non-standard Width 4-iS32H 4-i2S2H C D Height between 260 and 3000 mm N-Std Width < iS33x 4-i2S3x C D iS337 4-i2S37 C D iS338 4-i2S38 C D iS339 4-i2S39 C D Non-standard Width 4-iS33H 4-i2S3H C D Equipment on opening leaf: Lock, European cylinder and handles + stainless steel roses Equipment on semi-fixed leaf: Door stile + top and bottom locks Equipment on sliding leaf: Bar Lock, European Cylindre and handle, stainless steel roses Additional trolley kit D-C A For sliding door with a width of 200 mm Includes: carriage pack + 2 aluminium frame brackets and backplate CREMONE OPTION For single point locking 4-99 C Includes: carriage pack + 2 aluminium frame brackets and backplate Height of flush pull handle axis = 98 mm 6

10 Nomenclature 208 INFLUENCE Range Options Deadlines: A = 3 days - B = 0 days - C = days - D = 20 days (upon receipt of the OC)- E on request. Additional DOOR All Width K-00 C TRANSOM OPAL GLAZING added value per m2 (total dimension of the door) E GLAZING 44/2 added value per m2 (total dimension of the door) E DOORS IN KIT without glazing and DOORS IN KIT B E without panels Roller LOCK added value E Automatic drop seal DOUBLE GLAZING E for opening door DOUBLE GLAZING E Can be shortened by 0 cm SINGLE GLAZING E SINGLE GLAZING E Can be shortened by 0 cm Square door frame width reference qty/box Standard height 2040 mm SINGLE-LEAF WOODEN B D DOORS OR DOORS B D WITH ALUMINIUM A D FRAME A D B D Includes: Hinges, gaskets, brackets, strike plate DOUBLE-LEAF WOODEN B D DOORS OR DOORS WITH B D ALUMINIUM FRAME B D B D SINGLE-LEAF WOODEN Includes: Hinges, gaskets, brackets, strike plate DOORS WITH 3 m B D TRANSOM PANEL OR B D DOORS ALUMINIUM B D FRAME Includes: Hinges, gaskets, brackets, strike plate DOUBLE-LEAF B D WOODEN DOORS B D WITH 3 m TRANSOM B D PANEL OR DOORS WITH Includes: Hinges, gaskets, brackets, strike plate ALUMINIUM FRAME Standard height 2040 mm SINGLE-LEAF B D CLARIT DOORS made A D of toughened glass A D Add the single-leaf Clarit door equipment DOUBLE-LEAF B D CLARIT DOORS made B D of toughened glass B D Add the double-leaf Clarit door equipment SINGLE-LEAF B D CLARIT DOORS made B D 3 ml TRANSOM PANEL B D Add the single-leaf Clarit door equipment DOUBLE-LEAF B D CLARIT DOORS made B D 3 ml TRANSOM PANEL B D Add the double-leaf Clarit door equipment Door frames with non-standard widths width reference qty/box SINGLE-LEAF FOR WOODEN DOOR 0 a H B D AND DOOR WITH ALUMINIUM FRAME Maximum height 3000 mm made to measure DOUBLE-LEAF FOR WOODEN DOOR 03 a H B D AND DOOR WITH ALUMINIUM FRAME Maximum height 3000 mm made to measure 7

11 Nomenclature 208 INFLUENCE Range Door accessories Deadlines: A = 3 days - B = 0 days - C = days - D = 20 days (upon receipt of the OC)- E on request. Clarit equipment for toughened glass door reference qty/box blanc / Chromé-mat CLARIT EQUIPMENT KIT matt chrome A SINGLE-LEAF width 8 mm A matt chrome, Includes : Middle lock, cylinder, 2 hinges + backplates and screws CLARIT EQUIPMENT KIT matt chrome A width 8 mm DOUBLE-LEAF A Includes: Middle lock, cylinder, 4 hinges + backplates and screws, repeater strike plate (identical to the lock), top and bottom locks CLARIT EQUIPMENT KIT matt chrome E width 0 mm E SINGLE-LEAF Includes : Middle lock, cylinder, 3 hinges + backplates and screws CLARIT EQUIPMENT KIT matt chrome E width 0 mm E DOUBLE-LEAF Includes: Middle lock, cylinder, 6 hinges + backplates and screws, repeater strike plate (identical to the lock), top and bottom locks Surface-mounted sliding rail kit length reference qty/box For doors with aluminium frame or wooden doors Fixed price for lacquering RAIL KIT 3, A D SINGLE-LEAF Includes: Rail, strip, 2 rollers, bottom guide, 2 roller stoppers, door stopper and 2 rail end stops RAIL KIT 3, B D DOUBLE-LEAF, E E Includes: Rail, strip, 2 rollers, bottom guide, 2 roller stoppers, door stopper and 2 rail end stops ADDITIONAL STRIP 3,00 D-C0 E E Strip maximum unit length 3 m Accessories huisseries length reference qty/box All accessories are already included in the door frame kit DOOR FRAME PROFILE 3, B 3 HINGES KIT -403 B GROOVE COVER 2, B Black GASKET KIT S-L WOODEN or ALU FRAME,20 J B Black GASKET KIT D-L WOODEN or ALU FRAME,20 J B Black GASKET KIT S-L/D-L WOODEN or ALU FRAME,20 J B Black TRANSOM PANEL Bags include: Gaskets + 2 door frame angle brackets + screw + adapted strike plate GASKET KIT S-L Clarit DOOR FRAME,20 J B Black GASKET KIT D-L Clarit DOOR FRAME,20 J B Black GASKET KIT S-L/D-L Clarit DOOR FRAME,20 J B Black TRANSOM PANEL Bags include: Gaskets + 2 door frame angle brackets + screw + adapted strike plate 8

12 Nomenclature 208 ELANCE Range Frame base Deadlines: A = 3 days - B = 0 days - C = days - D = 20 days (upon receipt of the OC)- E on request. Profiles and accessories Length / lm Reference box plastic film Anodized / White / Graphite As well for Wall start "E" CHANNEL, E E 3, A D Delivery time: A on Anodized. D on White 90 and Graphite To be clipped in the channel SIMPLE GLAZING 3, A D DECENTERED Delivery time: A on Anodized. D on White 90 and Graphite To clip on the double glazing side of the channel "E" CHANNEL COVER PROFILE 3, A D Delivery time: A on Anodized. D on White 90 and Graphite To clip on the single glazing side of the channel "E" CHANNEL COVER PROFILE 2 3, A D Delivery time: A on Anodized. D on White 90 and Graphite Also for Corner profile 2 and 3 directions E PLINTH 3, E E Delivery time: A on Anodized. D on White 90 and Graphite For E plinth SKIRTING BOARD COVER 3, A D Delivery time: A on Anodized. D on White 90 and Graphite To be glued on the back of the channel CHANNEL GASKET "E" 20, A Black For all connection of 2 channels on a right angle "E" CHANNEL ANGLE BRACKET A Raw Aluminum For all connection of 2 channels in alignment E channel JUNCTION A Raw Aluminum For 4 angle assembly ANGLE BRACKET A Raw Aluminum Adjutable in hight, 2 per glass unit GLASS WEDGE A Adjutable in hight, 2 per glass unit For frameless partition end END CHANNEL COVER Kit 2 pieces A D Delivery time: A on Anodized. D on White 90 and Graphite Replaces the channel bracket in the assembly of channel on vertical ending profile channel INSERT A Black Elance Right Angle Profile 90 3, E E Elance Open Angle Profile 3 3, E E GLAZING ACCESSORIES GLAZING ACCESSORIES Length / lm Reference box plastic film Finish Single Glass centered for 0 mm glass thickness S6/i-8 GLAZING GASKET 3, A Black Finish Single Glass centered for 0 or mm glass thickness Finish Double Glazing for Glass 0 or 2 mm. Glazing gaskets S8 3, A Clear Grey Finish double glazing for glass thickness 2mm. STRING GASKET A Black install tool with ref: -96 Finish Single Glass centered for 0 and 2 mm glass thickness. Finish double glazing for glass thickness 0 mm. STRING GASKET A Black To install tool with ref: -96 STRING GASKET A Black To install tool with ref: -96 transparent adhesive gasket between glasses edge to edge VHB 3M foam tape 6, A Thickness 2 mm X width 6 mm Industrial cleaner Bottle 200 ml A 3M94 Primer Bottle 238 ml A Facilitates application of the etch primer on the edges of the glass panes Primer applicator nozzle A 9

13 Nomenclature 208 ELANCE Range Door frame Deadlines: A = 3 days - B = 0 days - C = days - D = 20 days (upon receipt of the OC)- E on request. Door frame & accessories Length / lm Reference box plastic film Anodized / White / Graphite Use 2 profiles for each door VERTICAL DOOR FRAME 3, A D SINGLE GLAZING Delivery time: A on Anodized. D on White 90 and Graphite VERTICAL DOOR FRAME 3, A D DOUBLE GLAZING Perforated at each end for connection to channel with inserts Delivery time: A on Anodized. D on White 90 and Graphite Use kit for each door (wood, aluminum frame or Clarit) KIT DOOR TRANSOM LEAF / A D KIT DOOR TRANSOM LEAF / A D Non-standard Width 2-8H C D KIT DOOR TRANSOM 2 LEAF / A D KIT DOOR TRANSOM 2 LEAF / A D Non-standard Width 2-8X C D Includes: : Brackets, gaskets, inserts Use length per door framing profile GROOVE COVER 3, A D Only for wooden and Alu-Framed doors 3 HINGES KIT A D Included: reinforced upper hinge, striker -0, door stop Only for wooden and Alu-Framed doors KIT 2 AXIS SWIVEL A Stainless steel FOR WOODEN AND ALUMINIUM DOORS Included: strike -0, door stop For Clarit doors 2 mm thickness (see door plans in the installation manual) KIT 2 AXIS SWIVEL A Stainless steel FOR CLARIT DOORS Included: strike -40, door stop For Clarit doors 2 mm thickness (see door plans in the installation manual) CLARIT LOCK A Brushed aluminum Included: cylinder with key, door stop For Clarit doors 2 mm thickness (see door plans in the installation manual) KIT SEMI-FIXED CLARIT & LOCK 6-87 E Brushed aluminum Including : repeater strike plate (identical to the lock), top and bottom locks For Clarit Door on free glass 2 mm thick (maximum surface : 2,6 m²) B-TWIST HINGE 6-90 E Stainless steel FOR CLARIT DOORS Swivel with hydraulic brake with openend position blocking For Alu-framed doors with roller lock or sliding or Clarit doors Pull Bar E Stainless steel Including a key cylinder For wooden and Alu framed doors AUTOMATIC PLINTH PAJ 600 / E E To be installed in the door machining (ref ) DOOR CLOSER E Left RECESSED E Right Compatible with wooden doors, see machining plans in installion guide Replaces the upper door framing groove cover, per Door closer ITS 96 DOOR CLOSER COVER GROOVE, E 0,28 E,82 0

14 Nomenclature 208 ELANCE Range Deadlines: A = 3 days - B = 0 days - C = days - D = 20 days (upon receipt of the OC)- E on request. Elance Aluminum Framed Doors Swinging Aluminum Framed Doors width/lm Reference plastic film Anodized / White / Graphite With Lock, European + cylinder + stainless steel handle (included) Laminated glass pane, 33/2 or Tempered 6 mm C328 E E DOOR SINGLE C329 E E CENTRED GLAZING Non-standard Width 4-C32H E E European LOCK Height between 260 and 3000 mm C338 E E C339 E E Non-standard Width 4-C33H E E Delivery time: D on Anodized. E on White 90 and Graphite O328 D / E E DOOR SINGLE O329 D / E E SINGEL SIDED GLAZING Non-standard Width 4-O32H D / E E European LOCK Height between 260 and 3000 mm O338 D / E E O339 D / E E Non-standard Width 4-O33H D / E E Delivery time: D on Anodized. E on White 90 and Graphite D328 D / E E DOUBLE GLAZED DOOR D329 D / E E European LOCK Non-standard Width 4-D32H D / E E Height between 260 and 3000 mm D338 D / E E D339 D / E E Non-standard Width 4-D33H D / E E Delivery time: D on Anodized. E on White 90 and Graphite DOOR IN KIT SINGLE GLAZING Specify: Kit D / E E Without Glazing DOUBLE GLAZING Specify: Kit D / E E For door closers Dorma ITS (Ref & 6-93) MACHINING FOR DOOR CLOSE E 44,70 RECESSED Swinging Aluminum Framed Doors width/lm Reference plastic film Anodized / White / Graphite With Roller lock (inclus) + Strike mm tempered glass + drilling for pullbar C228 E E DOOR SINGLE C229 E E CENTRED GLAZING Non-standard Width 4-C22H E E ROLLER LATCH Height between 260 and 3000 mm C238 E E C239 E E Non-standard Width 4-C23H E E O228 E E DOOR SINGLE O229 E E SINGEL SIDED GLAZING Non-standard Width 4-O22H E E ROLLER LATCH Height between 260 and 3000 mm O238 E E O239 E E Non-standard Width 4-O23H E E D228 E E DOUBLE GLAZED DOOR D229 E E ROLLER LATCH Non-standard Width 4-D22H E E Height between 260 and 3000 mm D238 E E D239 E E Non-standard Width 4-D23H E E DOOR IN KIT SINGLE GLAZING Specify: Kit D / E E Without Glazing DOUBLE GLAZING Specify: Kit D / E E Delivery time: D on Anodized. E on White 90 and Graphite For door closers Dorma ITS (Ref & 6-93) MACHINING FOR DOOR CLOSE E 44,70 RECESSED

15 Nomenclature 208 ELANCE Range Deadlines: A = 3 days - B = 0 days - C = days - D = 20 days (upon receipt of the OC)- E on request. Elance Aluminum Framed Doors Semi-fix for aluminum framed openning doors width/lm Reference plastic film Anodized / White / Graphite with door stile and top and bottom locks Laminated glass pane, 33/2 or Tempered 6 mm Semi-fixed C328 E E CENTRED GLAZING C329 E E Non-standard Width 4-2C32H E E Height between 260 and 3000 mm C338 E E C339 E E Non-standard Width 4-2C33H E E Semi-fixed O328 D / E E SINGLE GLAZING O329 D / E E DECENTERED Non-standard Width 4-2O32H D / E E Height between 260 and 3000 mm Delivery time: D on Anodized. E on White 90 and Graphite O338 D / E E O339 D / E E Non-standard Width 4-2O33H D / E E Delivery time: D on Anodized. E on White 90 and Graphite Semi-fixed D328 D / E E DOUBLE GLAZING D329 D / E E Non-standard Width 4-2D32H D / E E Height between 260 and 3000 mm Delivery time: D on Anodized. E on White 90 and Graphite D338 D / E E D339 D / E E Non-standard Width 4-2D33H D / E E Semi-fixed SINGLE GLAZING Without Glazing D / E E DOOR IN KIT DOUBLE GLAZING Without Glazing D / E E Without Glazing Option for swinging door inbetween free ends Length / lm Reference Compatible with all wooden, Alu Framed or Clarit doors plastic film Anodized / White / Graphite Free ends passage single glazing centered for all swinging doors inbetween studs Kit swinging door on ending profile All Width 4-97 B / D D SINGLE GLAZING Includes: manufactured studs, ending profiles, brackets, inserts Delivery time: B on Anodized. D on White 90 and Graphite Free ends passage double glazing for all swinging doors inbetween studs Kit swinging door on ending profile All Width 4-98 B / D D DOUBLE GLAZING Includes: manufactured studs, ending profiles, brackets, inserts Delivery time: B on Anodized. D on White 90 and Graphite Alu-framed sliding doors width/lm Reference plastic film Anodized / White / Graphite To be used with sliding rails ref ou 4-94 ou 4-946, 6 mm tempered glass + drilling for pullbar Add pullbar ref C29 E E SLIDING DOOR C2 E E SINGLE GLAZED CENTERED Non-standard Width 4-3C2H E E Height between 260 and 3000 mm C39 E E C3 E E Non-standard Width 4-3C3H E E DOOR IN KIT SINGLE GLAZING Specify: Kit D / E E Delivery time: D on Anodized. E on White 90 and Graphite Options for sliding doors Length / lm Reference for Alu-framed & Clarit Doors plastic film Anodized / White / Graphite Free ends passage profiles for all sliding doors (wood, aluminum framed, Clarit) Sliding ending profile kit All Width 4-9 C / D D SINGLE GLAZING Includes: studs, special ending profile + brushes, brackets, inserts Delivery time: C on Anodized. D on White 90 and Graphite Sliding ending profile kit All Width 4-96 C / D D DOUBLE GLAZING Includes: studs, special ending profile + brushes, brackets, inserts Delivery time: C on Anodized. D on White 90 and Graphite Mini width : 830 mm & max weight 00 kg KIT SLIDING RAIL SLICE Leaf 3, C / D D, E D KIT SLIDING RAIL SLICE Leaf Delivery time: C on Anodized. D on White 90 and Graphite Included :Rail + Cover - 2 carriage + autocloser + 2 end covers KIT SLIDING RAIL SLICE 2 Leaf Mini width: 830 mm; Max. width 20 mm & max weight 00 kg, E D Included : Rail + Cover - 2 carriage + autocloser + 2 end covers Tooling Reference plastic film To implement rope gaskets Roll tool for Gasket insertion -96 A Magnetic mouthpiece extension -962 A Length : 90 mm 2

16 Solid partition with cover strip

17 Additional covering profiles -- Lacquered channel Floor and ceiling connection profile ,0 m White -703-GRI - 3,0 m Graphite ,0 m Anodised ,0 m ,20 m White -70-GRI -,20 m Graphite ,20 m Anodised ,20 m -2- Rough i-7 post Vertical connection profile between panels and start wall ,60 m Brut ,0 m Brut ,20 m Brut FOR ANODISED FINISH ,60 m Black ,0 m Black ,20 m Black -7- Cover strip Post and corner finishing profile ,60 m White GRI - 2,60 m Graphite ,60 m Anodised ,60 m ,0 m White GRI - 3,0 m Graphite ,0 m Anodised ,0 m ,20 m White -790-GRI -,20 m Graphite ,20 m Anodised ,20 m Separator Connector between cut joints of the channels Sold by piece or by box of 0 Flat section, 40 x 2 Flat aluminium covering profile, to be glued ,0 m White ,0 m Anodised -673-GRI - 3,0 m Graphite ,0 m Aluminium covering corner bar 40 x 40 x 2, to be glued ,0 m White ,0 m Anodised -663-GRI - 3,0 m Graphite ,0 m -3- Channel bracket Post-channel connection part Sold by piece or by box of 0 Gasket for Influence channelà To be placed under the bottom channels for the acoustic sealing. Adhesive on both sides. 20 m reel Acousticlip Panel-post and channel wedging part Sold by piece or by box of Glass wool Acoustic between panels -4 mm Cloisolène 0,6 x,20 m 43 x mm foam gasket Foam gasket reel for acoustic sealing at partition start, with i-7 or i- post. 6 m reel Pannel Square edge plasterboard with decorative coating on outer side - BF3-2,60 x,20 m Pearl - BF3-3,00 x,20 m Pearl Framework colour: Anodised natural; 900 shiny, Graphite or colour on order. 4

18 Solid partition edge to edge

19 Connection profiles Additional -- Lacquered channel Floor and ceiling connection profile ,0 m White -703-GRI - 3,0 m Graphite ,0 m Anodised ,0 m ,20 m White -70-GRI -,20 m Graphite ,20 m Anodised ,20 m -2- Rough i-nov post Vertical connection profile between edge-to-edge panels ,60 m ,0 m -3- Channel bracket Post-channel connection part Sold by piece or by box of 0-4- Acousticlip Panel-channel wedging part Sold by piece or by box of Adhesive steel tabs* Panels fastened onto the posts by gluing and screwing Box of 0-6- Glass wool Acoustic between panels -4 mm Cloisolène 0,6 x,20 m -7- Pannel Tapered edge plasterboard with decorative coating on outer side - BR3-2,60 x,20 m Pearl - BR3-3,00 x,20 m Pearl I post Vertical connection profile on partition start and post for frames. Filling is facilitated by a geometry with no clipping elements I clipping bar Cover strip clipping profile, to be screwed on for i posts. Cover strip Post and corner finishing profile ,60 m White GRI - 2,60 m Graphite ,60 m Anodised ,60 m ,0 m White GRI - 3,0 m Graphite ,0 m Anodised ,0 m ,20 m White -790-GRI -,20 m Graphite ,20 m Anodised ,20 m FITTING THE ADHESIVE TABS --* The steel tabs are equipped with a very high-performance adhesive ensuring that the glue holds on the back of the panel. In order to guarantee the gluing, the tabs must be stored in a room at a temperature of at least C for 24 h before use. 2 Adhesive section of the tab Protruding part of panel 6

20 Semi-glazed partition

21 -- Lacquered channel Floor and ceiling connection profile ,0 m White -703-GRI - 3,0 m Graphite ,0 m Anodised ,0 m ,20 m White -70-GRI -,20 m Graphite ,20 m Anodised ,20 m -- Junction Transom-post connection part Sold by piece or by box of 0-6- Acousticlip Panel-post and channel wedging part Sold by piece or by box of Glazing gasket Gasket inserted into the glazing profiles i6 Suitable for 6 mm or 33/2 glass i8 Suitable for 8 mm or 44/2 glass -2- Rough i-7 post Vertical connection profile between panels and start wall ,60 m Brut ,0 m Brut ,20 m Brut FOR ANODISED FINISH ,60 m Black ,0 m Black ,20 m Black -3- Channel bracket Post-channel connection part Sold by piece or by box of 0-4- Lacquered one-piece transom Glazing base section closed horizontal profile and frame transom panel ,8 m White -70-GRI -,8 m Graphite ,8 m Anodised ,8 m OR Rough clip-on transom Glazing base section open horizontal profile and frame transom panel ,8 m ,0 m -7- Separator Part for clipping glazing profiles into channels and wedging the glazing Sold by piece or by box of 0-8- X glazing profile Lacquered covering profile on transoms, channels and posts SINGLE GLAZING CONFIGURATION ,8 m White -740-GRI -,8 m Graphite ,8 m Anodised ,8 m ,60 m White GRI - 2,60 m Graphite ,60 m Anodised ,60 m ,0 m White GRI - 3,0 m Graphite ,0 m Anodised ,0 m DOUBLE GLAZING CONFIGURATION ,8 m White -0-GRI -,8 m Graphite ,8 m Anodised -0- -,8 m ,60 m White -02-GRI - 2,60 m Graphite ,60 m Anodised ,60 m -03-GRI - 3,0 m White -03-GRI - 3,0 m Graphite ,0 m Anodised ,0 m -0- Glass wool Acoustic between panels -4 mm Cloisolène -- Pannel Square edge plasterboard with decorative coating on outer side - BF3-2,60 x,20 m Pearl - BF3-3,00 x,20 m Pearl -2- Glass STADIP laminated glazing (safety) - 33/2 rough cut - 44/2 rough cut PLANICLEAR annealed glazing (non-safety) - 6 mm rough cut - 8 mm rough cut -3- Cover strip Post and corner finishing profile ,60 m White GRI - 2,60 m Graphite ,60 m Anodised ,60 m ,0 m White GRI - 3,0 m Graphite ,0 m Anodised ,0 m ,20 m White -790-GRI -,20 m Graphite ,20 m Anodised ,20 m 8

22 Glazed partition with cover strip

23 -- Lacquered channel Floor and ceiling connection profile ,0 m White -703-GRI - 3,0 m Graphite ,0 m Anodised ,0 m ,20 m White -70-GRI -,20 m Graphite ,20 m Anodised ,20 m - 2- Rough i-7 post Vertical connection profile between glazing and start wall ,60 m Brut ,0 m Brut ,20 m Brut For anodised finish ,60 m Black ,0 m Black ,20 m Black -3- Channel bracket Post-channel connection Box of 0 X glazing profile DOUBLE GLAZING CONFIGURATION 33/2, 44/2 and /2 laminated glasses ,8 m White -0-GRI -,8 m Graphite ,8 m Anodised -0- -,8 m ,60 m White -02-GRI - 2,60 m Graphite ,60 m Anodised ,60 m -03-GRI - 3,0 m White -03-GRI - 3,0 m Graphite ,0 m Anodised ,0 m -6- Glazing gasket Gasket inserted into the glazing profiles i6 - Suitable for 33/2 laminated glass i8 - Suitable for 44/2 laminated glass i0 Suitable for /2 laminated glass -7- Glass Laminated glazing - 33/2 rough cute - 44/2 rough cute - /2 rough cute Z glazing profile DOUBLE GLAZING CONFIGURATION 66/2 or 66/2 + /2 differentiated laminated glass ,0 m White -723-GRI - 3,0 m Graphite ,0 m Anodised ,0 m Glazing gasket Gasket inserted into the glazing profiles i2 - Suitable for 66/2 laminated glass i0 - Suitable for /2 laminated glass Additional gasket inserted between /2 glazing and the channel mm packing gasket Glass STADIP laminated glazing (safety) - /2 rough cute - 66/2 rough cute -4- Separator Channel connector and glazing wedging part Box of 0-8- Cover Strip Post and corner finishing profile ,60 m White GRI - 2,60 m Graphite ,60 m Anodised ,60 m ,0 m White GRI - 3,0 m Graphite ,0 m Anodised ,0 m ,20 m White -790-GRI -,20 m Graphite ,20 m Anodised ,20 m Low or high current networks are integrated in the aluminium electric plinths. Network skirting board, H. 80 mm ,0 m White GRI - 3,0 m Graphite ,0 m Anodised ,0 m Double skirting board, H. 60 mm ,0 m White GRI - 3,0 m Graphite ,0 m Anodised ,0 m Skirting board cover ,0 m White -73-GRI - 3,0 m Graphite ,0 m Anodised ,0 m 20

24 Glazed partition edge to edge Low or high current networks are integrated in the aluminium electric plinths. Network skirting board, H. 80 mm ,0 m White GRI - 3,0 m Graphite ,0 m Anodised ,0 m Double skirting board, H. 60 mm ,0 m White GRI - 3,0 m Graphite ,0 m Anodised ,0 m Skirting board cover ,0 m White -73-GRI - 3,0 m Graphite ,0 m Anodised ,0 m 2

25 -- Lacquered channel Floor and ceiling connection profile ,0 m White -703-GRI - 3,0 m Graphite ,0 m Anodised ,0 m ,20 m White -70-GRI -,20 m Graphite ,20 m Anodised ,20 m - 2- Separator Channel connector and glazing wedging part Box of 0 X glazing profile DOUBLE GLAZING CONFIGURATION /2 + /2 laminated glasses ,60 m White -02-GRI - 2,60 m Graphite ,60 m Anodised ,60 m -03-GRI - 3,0 m White -03-GRI - 3,0 m Graphite ,0 m Anodised ,0 m - 4- Glazing gasket Gasket inserted into the glazing profiles i0 - Suitable for /2 laminated glass -- Glass STADIP laminated glazing (safety) - /2 laminated, polished flat gaskets SECURIT tempered glazing (safety) - 0 mm tempered glass Z glazing profile DOUBLE GLAZING CONFIGURATION 66/2 or 66/2 +/2 differentiated laminated glasses ,0 m White ,0 m Graphite ,0 m Anodised ,0 m Glazing gasket Gasket inserted into the glazing profiles i2 - Suitable for 66/2 laminated glass i0 - Suitable for /2 laminated glass Additional gasket inserted between /2 glazing and the channel mm packing gasket -.- Glass STADIP laminated glazing (safety) /2 laminated, polished flat gaskets /2 laminated, polished flat gaskets SECURIT tempered glazing (safety) mm tempered glass mm tempered glass Connection profiles Additional I post Vertical connection profile on partition start and post for frames. Filling is facilitated by a geometry with no clipping elements Cover strip Post and corner finishing profile I clipping bar Cover strip clipping profile, to be screwed on for i posts ,60 m White GRI - 2,60 m Graphite ,60 m Anodised ,60 m ,0 m White GRI - 3,0 m Graphite ,0 m Anodised ,0 m ,20 m White -790-GRI -,20 m Graphite ,20 m Anodised ,20 m 22

26 INFLUENCE frame with cover strip Rough i-7 post Vertical connection profile between panels and start wall ,60 m Brut ,0 m Brut ,20 m Brut 3 FOR ANODISED FINISH ,60 m Black ,0 m Black ,20 m Black -2- Channel bracket Post-channel connection part Sold by piece or by box of Junction Transom-post connection part Sold by piece or by box of 0-4- Acousticlip Panel-channel wedging part Sold by piece or by box of 00 For single-leaf glass door mm White GRI mm Graphite mm Anodised mm mm White GRI mm Graphite mm Anodised mm 2 OU Rough clip-on transom Glazing base section open horizontal profile and frame transom panel ,8 m ,0 m -- Rounded door frame (Also available in square frame) For single-leaf wooden door or door with aluminium frame mm White 2-83-GRI mm Graphite mm Anodised mm mm White 2-93-GRI mm Graphite mm Anodised mm -6- Lacquered one-piece transom Glazing base section closed horizontal profile and frame transom panel ,8 m White -70-GRI -,8 m Graphite ,8 m Anodised ,8 m -7- Cover strip Post and corner finishing profile ,60 m White GRI - 2,60 m Graphite ,60 m Anodised ,60 m ,0 m White GRI - 3,0 m Graphite ,0 m Anodised ,0 m ,20 m White -790-GRI -,20 m Graphite ,20 m Anodised ,20 m 23

27 ELANCE Partition : glazed edge to edge -- Channel UNIQUE 3 IN Double-groove side for double glazing finish, or off-centre single glazing. TURN THE PART OVER Single groove side for central single glazing finish ,0 m Anodised ,0 m White -83-GRI - 3,0 m Graphite ,0 m ,40 m Anodised ,40 m White -8-GRI -,40 m Graphite -8- -,40 m + Off-centre single glazing cover Additional profile for off-centre single glazing finish ,0 Anodised ,0 White -823-GRI - 3,0 Graphite 2 Joint for smooth Elance Sticks under the ELANCE profile in ground connections, ceilings and walls. Roll of 20 m Channel bracket Connector between horizontal and vertical channels Sold by piece or by box of 0-3- Joint Connecting part between horizontal channels Sold by piece or by box of 0 -- Glass STADIP laminated glazing (safety) /2 laminated, polished flat gaskets 66/2 laminated, polished flat gaskets SECURIT tempered glazing (safety) - 0 mm tempered glass - 2 mm tempered glass -7- Cord gasket Gasket inserted between the glass and channel no. 3 - For 2 mm glass with SVD or DV finish no. 4 - For 0 mm SVC, SVD, DV glass, and for 2 mm SVC glass -4- Glazing wedge Part for adjusting glass height in bottom channel Provide 2 wedges per glazing -6- Glazing gasket Gasket inserted into the Elance channel E0 - For the 0 mm or /2 glass E2 - For the 0 mm or 66/2 glass Framework colour : Anodised natural, 900 shiny, Graphite or colour on order. 24

28 Full height Elance frame 2 -- Double glazing frame vertical ELANCE frame vertical profile in double glazing or off-centre single glazing partition ,0 m Anodised Central single glazing frame vertical ELANCE frame vertical profile in central single glazing partition ,0 m Anodised Off-centre single glazing cover Frame vertical covering profile with off-centre single glazing finish ,0 m Anodised -2- Frame transom, width 830 Single-leaf frame transom kit, width 830 mm, including brackets, gaskets and inserts mm Anodised Frame transom, width 930 Single-leaf frame transom kit, width 930 mm, including brackets, gaskets and inserts mm Anodised Frame transom, width 660 Double-leaf frame transom kit opening frame width 2 x 830 mm, including brackets, gaskets and inserts mm Anodised Frame transom, width 860 Double-leaf frame transom kit opening frame width 2 x 930 mm, including brackets, gaskets and inserts mm Anodised -3- Groove cover Technical groove aluminium covering profile on verticals and transoms ,0 m Anodised 4.- Strike plate (included in the hinge kit) Stainless steel part with its backplate to be screwed into the frame profile 2.- Insert (included - in transom kit) Frame vertical connecting part in the bottom channel Sold by bag of 0 or box of hinges kit Kit comprising two double hinges, triple hinge and the door strike plate Sold by piece -- Channel bracket Connector between the top channel and the frame verticals Sold by piece or by box of 0 2

29 Clipper designs, manufactures and distributes offi ce partition systems made of aluminum profi les declined in two ranges of frames and aluminum framed doors. The new ELANCE partition dedicated to edge to edge glass revolutionizes and simplifi es the assembly and fi nishing of glazing in the frame by the conception and development of a single multi-functions channel. The new range of doors of the ELANCE partition offers a light and trendy aesthetic in perfect harmony with the evolution of uses in commercial layouts. CORAMINE Société par Actions Simpli ée au capital de euros Siège social : 2, rue Étienne Audibert SENLIS R.C.S. Compiegne ZI. - 2, avenue Étienne Audibert BP Senlis Cedex. Tél.+33 (0) Fax.+33 (0) Numéro indigo (0,09 euros TTC/mn). clipper@saint-goabin.com -