DIRECT FIRED ABSORPTION CHILLER & HEATER

Transcription

1 DIRECT FIRED ABSORPTION CHILLER & HEATER MODEL : SAB-DF012~070E1 SAB-DF012~100G1. CHP Solution Inc

2 Excellent Performance with More Energy Savings, Excellent Efficiency iency at Much Lower Cost. At Cention, basing ourselves on cooling technology and know-how acquired over many years, we put into practice our latest proprietary technology. Through the use of large chilled /cooling temperature differential adaptability and provision of a high-functionality microcomputer as a standard control panel, superior reliability and durability are realized, while achieving running efficiency. As an item of new-age cooling equipment Cention s one step advanced chiller contributes to the realization of total energy-saving and low cost in air-conditioning system. Low Energy and Low Cost -By means of the new cooling flow system (ACA flow), a standard frame size accommodating large chilled /cooling temperature differential is realized. By improvement of control of solution circulating quantity, a 10% improvement in average load factor is achieved in partial load characteristics. High Reliability -A high functionality microcomputer control panel with a complete set of preventive maintenance and abnormality forecast functions is a standard feature. Standard cooling capability realizing up to 4,000 hrs/yr operation. Superior Operability and Easy Maintenance -Operating condition or abnormalities are quickly shown on easy-to-see liquid crystal digital and LED displays. Full automation of purging operation is realized by use of ejector purging device which does not use electricity and can purge out any non-condensed gases. Compatible with air conditioning system interfaces and supports introduction of remote supervision system. Large-Temperature Temperature-Differential System. -By using the large-temperature-differential system, the circulating volumes of chilled and cooling can be reduced. The large-temperature-differential system reduces needed for circulating air and, because of reduced volumes of the draught from the air conditioner fan and of the circulating from the chilled and cooling pumps. In addition, it makes such facilities as air ducts and chilled/cooling pipes smaller, and also reduces the initial cost for them.

3 Efficiency Operation. -In addition to the parallel flow system, Cention's new proprietary flow technology (ACA flow technology) is employed in the cooling system. Without increasing the chiller frame size, the adaptation to large chilled/cooling temperature differentials has been made possible. Accordingly, energy-saving and low operating cost (by reduction of start-up and other operating costs) are achieved not only for the chiller but for airconditioning as well. High Performance Microcomputer. -Electric saving with large-temperature differential chilled/cooling system. Stable and reliable operation with crystallization free In the parallel flow system, the diluted solution coming out of the absorber is divided into two flows. These two flows of solution are sent to the high-temperature and low-temperature generators separately. The system holds the flow of the high-temperature generator lower than the series flow(indicated by in the figure), while keeping an enough margin for crystallization in a low-temperature condition (indicated by in the figure). In addition, the performance of absorption cycle is increased because the rate of solution flow into the high-temperature generator is made lower than that of series flow.

4 Specifications 1) High Efficiency Specifications (COP 1.32~1.35 MODEL) Item Chilled Cooling Standard condition(12-7 / )(COP 1.32) SAB-DF 012E1 015E1 018E1 021E1 024E1 028E1 032E1 USRT kw ,125 Mcal/h kw ,000 Temperature Inlet 12 Outlet 7 Flow rate /h PD kpa Connection A PASS - Odd Odd Odd Even Even Odd Odd Temperature Inlet 32 Outlet 37 Flow rate /h PD kpa Connection A PASS - Odd Odd Odd Even Even Odd Odd Inlet temp Outlet temp Flow rate /h PD kpa Connection A Electric capacity Electric motor Gas consumption PASS - Odd Odd Odd Even Even Odd Odd 50Hz kva Hz kva Sol. Pump kw (2.2) (2.2) Ref. Pump kw Burner fan kw Cooling N /h Heating N /h Input supply mmaq 200~4000 Exhaust gas connection mm 266X X X364 dimensions Length(L) mm 3,353 3,408 3,791 4,591 Width(W) mm 1,955 1,955 1,955 1,955 Height(H) mm 2,419 2,419 2,419 2,419 Operating weight Ton Rigging weight Ton Insulation area Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM

5 Item Chilled Cooling Electric capacity Gas consumption Standard condition(12-7 / )(COP 1.32) Cooling tower type SCTM NOTES 1.(1 USRT) is 3,516 kw(3,024 kcal/h) 7. Inlet of chilled/hot/cooling are all A side 2. Fouling factor (chilled/hot/cooling ) is Outlet is B side for Odd PASS and A side for Even PASS K/W( h /kcal) 8. If supply of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible for chilled/hot/cooling 9. Dimension of gas pipe is changed by gas supply is 780 kpa G(8 kg/ G). or operation of remote on/off 4. control range for Standard specification (Capacity, chilled/cooling ) in cooling mode is 100~25%. 5. Caloric value of 13A gas is 46 MJ/ N(11,000 kcal/ N). 6. Exhaust gas of NO X is 45 ppm(o 2=5%) SAB-DF 036E1 040E1 045E1 050E1 056E1 063E1 070E1 USRT kw 1,266 1,407 1,582 1,758 1,969 2,215 2,461 Mcal/h 1,001 1,110 1,252 1,387 1,490 1,665 1,947 kw 1,164 1,291 1,456 1,613 1,733 1,936 2,264 Temperature Inlet 12 Outlet 7 Flow rate /h PD kpa Connection A PASS - Odd Odd Odd Odd Even Even Even Temperature Inlet 32 Outlet 37 Flow rate /h PD kpa Connection A PASS - Odd Even Odd Odd Even Even Even Temperature Inlet 55.4 Outlet / / 60 Flow rate /h PD kpa Connection A PASS - Odd Odd Odd Odd Even Even Even 50Hz kva Hz kva Sol. Pump kw Ref. Pump kw Burner fan kw Input Cooling N /h Heating N /h supply mmaq 200 ~ 4,000 Exhaust gas connection mm 440X X X X788 Length(L) mm 5, X656 5,807 7,183 7,883 dimensions Width(W) mm 2,131 2,395 2,468 2,468 Height(H) mm 3,102 3,102 3,102 3,102 Insulation area Operating weight Ton Rigging weight Ton Hot Surface Cold Surface Chilled Cooling

6 Large temperature differentials condition(15-7 / ) (COP 1.35) Item SAB-DF 012EA 015EA 018EA 021EA 024EA 028EA 032EA USRT kw ,125 Mcal/h kw ,000 Temperature Inlet 15 Outlet 7 Flow rate /h Chilled PD kpa Connection A PASS - Odd Odd Odd Even Even Even Even Temperature Inlet 32 Outlet 37 Flow rate /h Cooling PD kpa Connection A PASS - Odd Odd Odd Even Even Odd Odd Inlet Temp Outlet Temp Flow rate /h PD kpa Connection A PASS - Odd Odd Odd Even Even Even Even Electric capacity Gas consumption 50Hz kva Hz kva Sol. Pump kw (2.2) (2.2) Ref. Pump kw Burner fan kw Cooling N /h Heating N /h Input supply mmaq 200~4,000 Exhaust gas connection mm 266X X X364 dimensions Length(L) mm 3,353 3,408 3,791 4,591 Width(W) mm 1,955 1,955 1,955 1,955 Height(H) mm 2,419 2,419 2,419 2,419 Operating weight Ton Rigging weight Ton Insulation area Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM

7 Large temperature differentials condition(15-7 / ) (COP 1.35) SAB-DF Item 036EA 040EA 045EA 050EA 056EA 063EA 070EA USRT kw 1,266 1,407 1,582 1,758 1,969 2,215 2,461 Mcal/h 1,001 1,110 1,252 1,387 1,490 1,665 1,947 kw 1,164 1,291 1,456 1,613 1,733 1,936 2,264 Temperature Inlet 15 Outlet 7 Flow rate /h Chilled PD kpa Connection A PASS - Even Even Even Even Odd Odd Odd Temperature Inlet 32 Outlet 37 Flow rate /h Cooling PD kpa Connection A PASS - Odd Even Odd Odd Even Even Even Temperature / / / / / / / 60 Flow rate /h Electric capacity PD kpa Connection A PASS - Even Even Even Even Odd Odd Odd 50Hz kva Hz kva Sol. Pump kw Ref. Pump kw Burner fan kw Cooling N /h Gas consumption Heating N /h Input supply mmaq 200 ~ 4,000 Exhaust gas connection mm 440X X X X788 Length(L) mm 5,034 5,807 7,183 7,883 Width(W) mm 2,131 2,395 2,468 2,468 Height(H) mm 3,102 3,102 3,102 3,102 Operating weight Ton Rigging weight Ton Insulation area Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM NOTES 1.(1 USRT) is 3,516 kw(3,024 kcal/h) 7. Inlet of chilled/hot/cooling are all A side 2. Fouling factor (chilled/hot/cooling ) is Outlet is B side for Odd PASS and A side for Even PASS K/W( h /kcal) 8. If supply of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible for chilled/hot/cooling 9. Dimension of gas pipe is changed by gas supply is 780 kpa G(8 kg/ G). or operation of remote on/off 4. control range for Standard specification (Capacity, 10. If you use the oil fuel(light oil), combustion system should be changed chilled/cooling ) in cooling mode is 100~25%. from over 360RT. 5. Caloric value of 13A gas is 46 MJ/ N(11,000 kcal/ N). 6. Exhaust gas of NO X is 45 ppm(o 2=5%)

8 2) Standard Efficiency Specifications (COP 1.2 MODEL) Standard condition (12-7 /32-37 ) Item SAB-DF 012G1 015G1 018G1 021G1 024G1 028G1 032G1 USRT kw ,125 Mcal/h kw ,000 Temperature Inlet 12 Outlet 7 Flow rate /h Chilled Pressure kpa Connection A PASS - Even Even Odd Even Even Odd Odd Temperature Inlet 32 Outlet 37 Flow rate /h Cooling Pressure kpa Connection A PASS - Odd Even Odd Even Even Odd Odd Temperature Inlet 55.4 Outlet 60 Inlet 55.6, Outlet 60 Flow rate /h Pressure kpa Connection A PASS - Even Even Odd Even Even Odd Odd Electric capacity 50Hz kva Hz kva Sol. Pump kw Ref. Pump kw Burner fan kw Cooling N /h Gas Heating consumption N /h Input supply mmaq 200~4,000 Exhaust gas connection mm 440X X X436 Length(L) mm 3,350 3,590 3,790 4,150 4,410 4,950 4,950 Width(W) mm 1,925 1,925 1,925 1,925 1,925 1,988 1,988 Height(H) mm 2,170 2,170 2,170 2,170 2,170 2,248 2,248 Operating weight Ton Rigging weight Ton Insulation area Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM

9 Item Chilled Cooling Electric capacity SAB-DF Standard condition (12-7 / ) 036G1 040G1 045G1 050G1 056G1 060G1 070G1 USRT kw 1,266 1,407 1,582 1,758 1,969 2,110 2,461 Mcal/h 1,110 1,110 1,387 1,387 1,665 1,665 1,947 kw 1,291 1,291 1,613 1,613 1,936 1,936 2,264 Temperature Inlet 12 Outlet 7 Flow rate /h PD kpa Connection A PASS - Odd Odd Odd Odd Even Even Even Temperature Inlet 32 Outlet 37.3 Flow rate /h Pressure kpa Connection A PASS - Odd Odd Odd Odd Odd Odd Odd Temperature 54.9/ / / / / / /60 Flow rate /h PD kpa Connection A PASS - Odd Odd Odd Odd Even Even Even 50Hz kva Hz kva Sol. Pump kw Ref. Pump kw Burner fan kw Cooling N /h Gas Heating consumption N /h (13A Input supply mmaq 200~10,000 Exhaust gas connection mm 440X436 10, X X788 Insulation area Length(L) mm 5,150 5,150 5,920 6,100 Width(W) mm 2,440 2,480 2,550 3,350 Height(H) mm 2,650 2,940 3,040 3,480 Operating weight Ton Rigging weight Ton Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM NOTES 1.(1 USRT) is 3,516 kw(3,024 kcal/h) 7. Inlet of chilled/hot/cooling are all A side 2. Fouling factor (chilled/hot/cooling ) is Outlet is B side for Odd PASS and A side for Even PASS K/W( h /kcal) 8. If supply of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible for chilled/hot/cooling 9. Dimension of gas pipe is changed by gas supply is 780 kpa G(8 kg/ G). or operation of remote on/off control 4. control range for Standard specification (Capacity, chilled/cooling ) in cooling mode is 100~25%. 5. Caloric value of 13A gas is 46 MJ/ N(11,000 kcal/ N). 6. Exhaust gas of NO X is 45 ppm(o 2=5%)

10 Standard condition (12-7 / ) Item 080G1 090G1 100G1 SAB-DF USRT ,000 kw 2,813 3,165 3,516 Mcal/h 2,318 2,318 2,800 kw 2,695 2,695 3,256 Temperature Inlet 12 Outlet 7 Flow rate /h Chilled PD kpa Connection A PASS - Even Even Even Temperature 32 / / 37.9 Flow rate /h Cooling PD kpa Connection A PASS - Odd Odd Odd Temperature 55.2/ / /60 Flow rate /h PD kpa Connection A PASS - Even Even Even Electric capacity Gas consumption 50Hz kva Hz kva Sol. Pump kw Ref. Pump kw Burner fan kw Cooling N /h Heating N /h Input supply mmaq 200~10,000 Exhaust gas connection mm 440x x1096 Length(L) mm 6,400 7,250 Width(W) mm 3,350 3,350 Height(H) mm 3,480 3,480 Operating weight Ton Rigging weight Ton Insulation area Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM 1,200 1,400 1,600

11 Large temperature differentials condition(15-7 / ) Item SAB-DF 012GA 015GA 018GA 021GA 024GA 028GA 032GA USRT kw ,125 Mcal/h kw ,000 Temperature Inlet 15 Outlet 7 Flow rate /h Chilled PD kpa Connection A PASS - Even Even Odd Odd Odd Even Even Temperature Inlet 32 Outlet 37 Flow rate /h Cooling PD kpa Connection A PASS - Odd Even Odd Even Even Odd Odd Temperature 52.7 / / / / / / / 60 Flow rate /h PD kpa Connection A PASS - Even Even Odd Odd Odd Even Even Electric capacity Gas consumption 50Hz kva Hz kva Sol. Pump kw Ref. Pump kw Burner fan kw Cooling N /h Heating N /h Input supply mmaq 200~4,000 Exhaust gas connection mm 440X X X436 Length(L) mm 3,350 3,590 3,790 4,150 4,410 4,950 4,950 Width(W) mm 1,925 1,925 1,925 1,925 1,925 1,988 1,988 Height(H) mm 2,170 2,170 2,170 2,170 2,170 2,248 2,248 Operating weight Ton Rigging weight Ton Insulation area Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM

12 Item Chilled Cooling Electric capacity Large temperature differentials condition(15-7 / ) SAB-DF 036GA 040GA 045GA 050GA 056GA 060GA 070GA USRT kw 1,266 1,407 1,582 1,758 1,969 2,110 2,461 Mcal/h 1,110 1,110 1,387 1,387 1,665 1,665 1,947 kw 1,291 1,291 1,613 1,613 1,936 1,936 2,264 Temperature Inlet 15 Outlet 7 Flow rate /h PD kpa Connection A PASS - Even Even Even Even Odd Odd Odd Temperature Inlet 32 Outlet 37.3 Flow rate /h PD kpa Connection A PASS - Odd Odd Odd Odd Odd Odd Odd Temperature 51.8/ / / / / / /60 Flow rate /h PD kpa Connection A PASS - Even Even Even Even Odd Odd Odd 50Hz kva Hz kva Sol. Pump kw Ref. Pump kw Burner fan kw Cooling N /h Gas Heating consumption N /h Input supply mmaq 200~10,000 Exhaust gas connection mm 440X436 10, X X788 Insulation area Length(L) mm 5,150 5,150 5,920 6,100 Width(W) mm 2,440 2,480 2,550 3,350 Height(H) mm 2,650 2,940 3,040 3,480 Operating weight Ton Rigging weight Ton Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM NOTES 1.(1 USRT) is 3,516 kw(3,024 kcal/h) 7. Inlet of chilled/hot/cooling are all A side 2. Fouling factor (chilled/hot/cooling ) is Outlet is B side for Odd PASS and A side for Even PASS K/W( h /kcal) 8. If supply of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible for chilled/hot/cooling 9. Dimension of gas pipe is changed by gas supply is 780 kpa G(8 kg/ G). or operation of remote on/off 4. control range for Standard specification (Capacity, chilled/cooling ) in cooling mode is 100~25%. 5. Caloric value of 13A gas is 46 MJ/ N(11,000 kcal/ N). 6. Exhaust gas of NO X is 45 ppm(o 2=5%)

13 Large temperature differentials condition(15-7 / ) Item 080GA 090GA 100GA SAB-DF USRT kw Mcal/h kw Temperature Inlet 15 Outlet 7 Flow rate /h Chilled PD kpa Connection A PASS - Odd Odd Odd Temperature 32 / / 37.9 Flow rate /h Cooling PD kpa Connection A PASS - Odd Odd Odd Temperature 55.2/ / /60 Flow rate /h PD kpa Connection A PASS - Odd Odd Odd Electric capacity Gas consumption 50Hz kva Hz kva Sol. Pump kw Ref. Pump kw Burner fan kw Cooling N /h Heating N /h Input supply mmaq 200~10,000 Exhaust gas connection mm 440x x1096 Length(L) mm 6,400 7,250 Width(W) mm 3,350 3,350 Height(H) mm 3,480 3,480 Operating weight Ton Rigging weight Ton Insulation area Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM 1,200 1,400 1,600

14 3) Heating Increase Specifications(120~900RT COP 1.2 MODEL) Heating increase Standard condition(12-7 /32-37 ) SAB-DH Item 012G0 015G0 018G0 021G0 024G0 028G0 032G0 USRT kw ,125 Mcal/h ,110 1,110 kw ,000 1,291 1,291 Temperature Inlet 12 Outlet 7 Flow rate /h Chilled PD kpa Connection A PASS - Even Even Odd Even Even Odd Odd Temperature Inlet 32 Outlet 37 Flow rate /h Cooling PD kpa Connection A PASS - Odd Even Odd Even Even Odd Odd Temperature 54.1/ / / / / / /60 Flow rate /h PD kpa Connection A PASS - Even Even Odd Even Even Odd Odd Electric capacity 50Hz kva Hz kva Sol. Pump kw Ref. Pump kw Burner fan kw Gas Cooling N /h consumption Heating N /h Input supply mmaq 200~4,000 Exhaust gas connection mm 440X X X436 Length(L) mm 3,350 3,590 3,790 4,150 4,410 4,950 4,950 Width(W) mm 1,925 1,925 1,925 1,925 1,925 1,988 1,988 Height(H) mm 2,170 2,170 2,170 2,170 2,170 2,248 2,248 Operating weight Ton Rigging weight Ton Insulation area Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM

15 Item Chilled Cooling Electric capacity Gas consumption Heating increase Standard condition (12-7 /32 / ) SAB-DH 036G0 040G0 045G0 050G0 056G0 060G0 070G0 USRT kw 1,266 1,407 1,582 1,758 1,969 2,110 2,461 Mcal/h 1,387 1,387 1,665 1,665 1,947 1,947 2,318 kw 1,613 1,613 1,936 1,936 2,264 2,264 2,695 Temperature Inlet 12 Outlet 7 Flow rate /h PD kpa Connection A PASS - Odd Odd Odd Odd Even Even Even Temperature Inlet 32 Outlet 37.3 Flow rate /h PD kpa Connection A PASS - Odd Odd Odd Odd Odd Odd Odd Temperature 53.6/ / / / / / /60 Flow rate /h PD kpa Connection A PASS - Odd Odd Odd Odd Even Even Even 50Hz kva Hz kva Sol. Pump kw Ref. Pump kw Burner fan kw Input Cooling N /h Heating N /h supply mmaq 200 ~ 10,000 Exhaust gas connection mm 440X X X788 Insulation area Length(L) mm 5,150 5,150 5,920 6,100 Width(W) mm 2,440 2,480 2,550 3,350 Height(H) mm 2,650 2,940 3,040 3,480 Operating weight Ton Rigging weight Ton Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM NOTES 1.(1 USRT) is 3,516 kw(3,024 kcal/h) 7. Inlet of chilled/hot/cooling are all A side 2. Fouling factor (chilled/hot/cooling ) is Outlet is B side for Odd PASS and A side for Even PASS K/W( h /kcal) 8. If supply of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible for chilled/hot/cooling 9. Heating increase standard condition is just raising the heating calorie. is 780 kpa G(8 kg/ G). 10. Hot generator is changed for heating increase standard condition therefore 4. control range for Standard specification (Capacity, should check connection between the burner and the combustion system. chilled/cooling ) in cooling mode is 100~25%. 5. Caloric value of 13A gas is 46 MJ/ N(11,000 kcal/ N). 6. Exhaust gas of NO X is 45 ppm(o 2=5%)

16 Heating increase Standard condition (12-7 / ) Item 080G0 090G0 SAB-DH USRT kw Mcal/h kw Temperature Inlet 12 Outlet 7 Flow rate /h Chilled PD kpa Connection A PASS - Even Even Temperature 32 / / 37.9 Flow rate /h Cooling PD kpa Connection A PASS - Odd Odd Temperature 54.2 / / 60 Flow rate /h PD kpa Connection A PASS - Even Even Electric capacity 50Hz kva Hz kva Sol. Pump kw Ref. Pump kw Burner fan kw Cooling N /h Gas consumption Heating N /h Input supply mmaq 10,000 Exhaust gas connection mm 440x x1096 Length(L) mm 6,400 7,250 Width(W) mm 3,350 3,350 Height(H) mm 3,480 3,480 Operating weight Ton Rigging weight Ton Insulating area Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM 1,200 1,400

17 Item Heating increase Large temperature differentials condition (15-7 /32-37 ) SAB-DH 012GA 015GA 018GA 021GA 024GA 028GA 032GA USRT kw ,125 Mcal/h ,110 1,110 kw ,000 1,291 1,291 Temperature Inlet 15 Outlet 7 Flow rate /h Chilled PD kpa Connection A PASS - Even Even Odd Odd Odd Even Even Temperature Inlet 32 Outlet 37 Flow rate /h Cooling PD kpa Connection A PASS - Odd Even Odd Even Even Odd Odd Temperature 50.5/ / / / / / /60 Flow rate /h PD kpa Connection A PASS - Even Even Odd Odd Odd Even Even Electric capacity 50Hz kva Hz kva Sol. Pump kw Ref. Pump kw Burner fan kw Cooling N /h Gas consumption Heating N /h Input supply mmaq 200~4,000 Exhaust gas connection mm 440X X X436 Length(L) mm 3,350 3,590 3,790 4,150 4,410 4,950 4,950 Width(W) mm 1,925 1,925 1,925 1,925 1,925 1,988 1,988 Height(H) mm 2,170 2,170 2,170 2,170 2,170 2,248 2,248 Operating weight Ton Rigging weight Ton Insulating area Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM

18 Item Chilled Cooling Electric capacity Gas consumption Heating increase Large temperature differentials condition (15-7 /32 / ) SAB-DH 036GA 040GA 045GA 050GA 056GA 060GA 070GA USRT kw 1,266 1,407 1,582 1,758 1,969 2,110 2,461 Mcal/h 1,387 1,387 1,665 1,665 1,947 1,947 2,318 kw 1,613 1,613 1,936 1,936 2,264 2,264 2,695 Temperature Inlet 15 Outlet 7 Flow rate /h PD kpa Connection A PASS - Even Even Even Even Odd Odd Odd Temperature Inlet 32 Outlet 37.3 Flow rate /h PD kpa Connection A PASS - Odd Odd Odd Odd Odd Odd Odd Temperature 49.8/ / / / / / /60 Flow rate /h PD kpa Connection A PASS - Even Even Even Even Odd Odd Odd 50Hz kva Hz kva Sol. Pump kw Ref. Pump kw Burner fan kw Input Cooling N /h Heating N /h supply mmaq 200~10,000 Exhaust gas connection mm 440X X X788 Insulating area Length(L) mm 5,150 5,150 5,920 6,100 Width(W) mm 2,440 2,480 2,550 3,350 Height(H) mm 2,650 2,940 3,040 3,480 Operating weight Ton Rigging weight Ton Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM NOTES 1.(1 USRT) is 3,516 kw(3,024 kcal/h) 7. Inlet of chilled/hot/cooling are all A side 2. Fouling factor (chilled/hot/cooling ) is Outlet is B side for Odd PASS and A side for Even PASS K/W( h /kcal) 8. If supply of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible for chilled/hot/cooling 9. Heating increase standard condition is just raising the heating calorie. is 780 kpa G(8 kg/ G). 10. Hot generator is changed for heating increase standard condition therefore 4. control range for Standard specification (Capacity, should check connection between the burner and the combustion system. chilled/cooling ) in cooling mode is 100~25%. 5. Caloric value of 13A gas is 46 MJ/ N(11,000 kcal/ N). 6. Exhaust gas of NO X is 45 ppm(o 2=5%)

19 Heating increase Large temperature differentials condition (15-7 / ) Item 080GA 090GA SAB-DH USRT kw 2,813 3,165 Mcal/h 2,800 2,800 kw 3,256 3,256 Temperature Inlet 15 Outlet 7 Flow rate /h Chilled PD kpa Connection A PASS - Even Even Temperature 32 / / 37.9 Flow rate /h Cooling PD kpa Connection A PASS - Odd Odd Temperature 50.7 / / 60 Flow rate /h PD kpa Connection A PASS - Even Even Electric capacity 50Hz kva Hz kva Sol. Pump kw Ref. Pump kw Burner fan kw Cooling N /h Gas consumption Heating N /h Input supply mmaq 200~10,000 Exhaust gas connection mm 440x x1096 Length(L) mm 6,400 7,250 Width(W) mm 3,350 3,350 Height(H) mm 3,480 3,480 Operating weight Ton Rigging weight Ton Insulating area Hot Surface Cold Surface Chilled Cooling Cooling tower type SCTM 1,200 1,400

20 External dimensions Please refer to the specifications in p.4-7 for actual dimensions values of each model. Directions of outlet nozzle is on side B when the number of passes is odd number and on side A when it is even number above drawings. High efficiency E-series E MODEL 012E1/ 015E1 018E1 021E1/ 024E1 028E1/ 032E1 036E1/ 040E1 045E1/ 050E1 056E1/ 063E1 070E1 L 3,353 3,408 3,791 4,591 5,034 5,807 6,807 7,807 W 1,955 1,955 1,955 1,955 2,068 2,131 2,391 2,464 H 2,419 2,419 2,419 2,419 3,102 3,102 3,222 3,260 HIgh efficiency G-series G MODEL 012G1/ 015G1 018G1 021G1/ 024G1 028G1/ 032G1 036G1/ 040G1 045G1/ 050G1 056G1/ 063G1 070G1/ 080G1 090G1/ 100G1 L 3,350/3,590 3,790 4,150/4,410 4,950 5,150 5,150 5,920 6,100/6,400 7,250 W 1,925 1,925 1,925 1,988 2,440 2,480 2,550 3,350 3,350 H 2,170 2,170 2,170 2,248 2,650 2,940 3,040 3,480 3,480

21 Foundation & Maintenance space dimensions G-Series High efficiency G-series (A~K) A B C D E F G H I J K 012E , ,065 2, E , ,065 2, E , ,065 3, E , , ,065 3, E , , ,065 3, E1 1,060 2, , ,128 4, E1 1,060 2, , ,128 4, High efficiency G-series (A ~F ~F ) A B C D E F 012E1 2,400 1,410 2,200 1,412 2,065 2, E1 2,400 1,410 2,200 1,412 2,065 2, E1 3,000 1,960 2,800 1,412 2,065 3, E1 3,600 2,100 3,910 1,412 2,065 3, E1 3,600 2,100 3,910 1,412 2,065 3, E1 4,720 2,834 4,460 1,412 2,128 4, E1 4,720 2,834 4,460 1,412 2,128 4,200

22 High efficiency E-series E (A~K) A B C D E F G I J K 036E , , ,431 2,231 4,790 4, E , , ,431 2,231 4,790 4, E , ,470 1,170 2,695 2,495 5,790 5, E , ,470 1,170 2,695 2,495 5,790 5, E , ,677 2,653 1,540 2,768 2,568 7,090 7, E , ,677 2,653 1,540 2,768 2,568 7,090 7, E , ,677 2,953 1,940 2,768 2,568 7,790 7,990 High efficiency E-series E (A ~I ~I ) A B C D E F G H I 036E1 4,500 3,570 4, , ,231 4, E1 4,500 3,570 4, , ,231 4, E1 5,500 4,570 5, , ,495 5, E1 5,500 4,570 5, , ,495 5, E1 6,900 5,870 6, , ,568 7, E1 6,900 5,870 6, , ,568 7, E1 7,600 6,570 7, , ,568 7,790 Distributed by CHP Solution Inc. located at 333 Sylvan Avenue Suite 211, Englewood Cliffs, NJ USA ; info@centioncorp.com