1Mounting and positioning - mounting possible from several sides for versatile positioning. 2Permanent magnet - installed in the piston area
|
|
- Tyrone Roberts
- 5 years ago
- Views:
Transcription
1 2-Jaw Parel Series GP8 pneumatic Product information: Sealed square guide Sealed with additional wiper High precision due to low play guide Optimum transfer of power to gripping force Positioning of the gripper fi ngers via centering sleeves Maintenance free up to 5 million cycles High temperature resistant version (up to 5 C) available upon request Certification for clean room application: Category 4 for clean room applications according to DIN EN ISO Versions: e.g. order no.: N -B R Category 4 for clean room applications according to DIN EN ISO C For external gripping, self-locking, spring closing O For internal gripping, self-locking, spring opening Design: Mounting and positioning - mounting possible from several sides for versatile positioning 2Permanent magnet - insted in the piston area 3Wedge hook mechanism - synchronized the movement of the gripper jaws - high power Strong and precise square flat guide - high forces and moments capacity 5Energy supply - air connections available on several sides 6Drive - double acting pneumatic cylinder 7Removable centering sleeve - quick and cost-effective gripper fi nger positioning 8Integrated gripping force safety device - optional via intergrated spring (C and O Models) 36 Data, Drawings, 3-D Models, Operating Instructions
2 pneumatic 2-Jaw Parel Series GP8 Instation size: B H * T Stroke per Jaw Weight [kg] Gripping force [N] closing opening N-B NC-B NO-B NC-B NO-B N-B Instation size: B H * T N-B NC-B NO-B N-B NC-B NO-B Instation size: B H * T N-B NC-B NO-B NC-B NO-B N-B Instation size: B H * T N-B NC-B NO-B NC-B NO-B N-B * Version with gripping force protection (NC, NO), ** All data measured at 6 bar 37
3 2-Jaw Parel Series GP8 pneumatic Instation size: B H * T N-B NC-B NO-B NC-B NO-B N-B Instation size: B H * T N-B NC-B NO-B NC-B NO-B N-B Instation size: B H * T N-B NC-B NO-B NC-B NO-B N-B Instation size: B H * T N-B NC-B NO-B NC-B NO-B N-B * Version with gripping force protection (NC, NO), ** All data measured at 6 bar
4 pneumatic 2-Jaw Parel Series GP8 Instation size: B H * T Stroke per Jaw Weight [kg] Gripping force [N] closing opening N-B NC-B NO-B NC-B NO-B N-B * Version with gripping force protection (NC, NO), ** All data measured at 6 bar 39
5 2-Jaw Parel Series GP8 pneumatic Recommended accessories: Alternate proximity bracket 3 Plug-in connector KHA8-B-8 KHA82-B-8 KHA86-B-8 KHA82-B-8 KHA83-B-8 Version: Angled / Cable 5 m / Socket M8 (female) KAW5 Version: Straight / Cable 5 m / Socket M8 (female) KAG5 2 Inductive proximity switch Version: Cable 5 m Version: Cable.3 m / Connector M8 SK SK Version: Connector M8 4 Magnetic field sensor Version: Angled / Cable 5 m MFS3KHC Version: Straight / Cable 5 m MFS24KHC MFS24KHC MFS24KHC MFS24KHC MFS24KHC MFS24KHC MFS24KHC Version: Angled / Cable.3 m / Connector M8 MFS3SKHC Version: Straight / Cable.3 m / Connector M8 MFS24SKHC MFS24SKHC MFS24SKHC MFS24SKHC MFS24SKHC MFS24SKHC MFS24SKHC 4
6 pneumatic 2-Jaw Parel Series GP8 5 Pneumatic fittings 9 Universal jaw set Version: Angled Version: Straight WVM5 WVM5 WVM5 WV/8X6 WV/8X6 WV/8X6 WV/8X6 WV/4X8 WV/4X8 GVM5 GVM5 GVM5 GV/8X6 GV/8X6 GV/8X6 GV/8X6 GV/4X8 GV/4X8 Version: Aluminium Version: Steel UB83 UB84 UB86 UB88 UB8 UB82 UB86 UB82 UB83 UB83ST UB84ST UB86ST UB88ST UB8ST UB82ST UB86ST UB82ST UB83ST 6 Mounting block 7 Cover plate 8 Switch cam KB8- KB8-2 KB8-3 KB8-3 KB8-4 KB8-5 KB8-6 KB8-6 KB8-6 ADB83-B ADB84-B ADB86-B ADB88-B ADB8-B ADB82-B ADB86-B ADB82-B ADB83-B SN SN2 SN2 SN3 SN4 SN4 SN4 SN4 SN4 Supplementary accessories: Quick ventilation valve DEV4 DEV4 DEV4 DEV6 DEV6 DEV6 DEV6 DEV8 DEV8 Pressure safety valve DSV/8 Plug-in conversion connector Version: Straight / 3-pole / Connector M8 S8-G-3 Version: Straight / 3-pole / Connector M2 S2-G-3 4
bl 8 bm 1Robust, lightweight housing - hard coated aluminium alloy
2-Jaw Parel Series GP4X pneumatic Product information: Overlapping, extremely robust T-Slot guide for maximum force and moment resistance Gripper jaws made of ground surfaced and hardened steel ensuring
More information2-JAW ANGULAR GRIPPERS INSTALLATION SIZE GPW5008
-JAW ANGULAR GRIPPERS INSTALLATION SIZE GPW008 Installation size GPW008 / -Jaw Angular Grippers / pneumatic / Grippers PRODUCT SPECIFICATIONS TECHNICAL DATA Gripping force diagram Forces and moments Displays
More informationSeparators. pneumatic
Separators pneumatic Table of contents separators VEG-B Order no. Stroke Force in Force in Page [mm] retract [N] extend [N] Product Information 6 VEG10-B 10 30 40 10 VEG14-B 20 65 80 12 VEG15-B 40 65
More informationDrive. Guide. Profile rail guide with ball circuit and wiper smooth torsion stiff. Intake flange. Adapter plate
Linear Rail Slides Highlights Drive Double acting pneumatic cylinder maximum drive force in extend and retract movement pressure force up to 1 N Guide Profile rail guide with ball circuit and wiper smooth
More informationGrippers for Specific Tasks: O-Ring Assembly Grippers Internal Grippers
Grippers for Specific Tasks: O-Ring Assembly Grippers Internal Grippers Highlights Drive three single-acting pneumatic cylinders every cylinder is driven via a 5/ way valve retraction via spring Guide
More informationAxis Modules pneumatic
Axis Modules pneumatic Axis Modules XY-Compensation Order no. Stroke XY-Ebene Handling weight Page ± [mm] recommended [kg] Product Information 6 XY70 3 6 10 XY100 5 12 12 XY160 8 30 14 XY220 10 150 16
More informationTable of contents gripper electrical
Gripper electrical Table of contents gripper electrical Order no. Stroke per Gripping force Gripping force Page jaw [mm] in opening [N] in clothing [N] Product Information GEP1402 2 140 14 10 GEP1406C
More informationSwivel Unit. elektrical
Swivel Unit elektrical Table of contents Swivel Units elektrical Order No. Swivel angle Torque Page [ ] [Nm] Product Information 6 DEF60 min. 30 - max. 330 1,6 10 Order No. Swivel angle Torque max. Page
More informationRobotics Accessories
Robotics Accessories Robotics Accessories Tool Changer Order no. Connection flange Handling weight recommended [kg] Page Product Information 6 WWR40F/WWR40L TK40 15 10 WWR50F/WWR50L TK50 15 12 WWR63F/WWR63L
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More informationWIDE OPENING PARALLEL GRIPPER
News 2001 S E R I E S CGL Wide Opening Parallel Gripper Series CGL Piston diameter 10, 16, 20, 25 and 32 mm, magnetic The wide opening parallel gripper mod. CGL is available in 5 different sizes and has
More informationNOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove
NOMENCLATURE RZP -A - 100-1 / GA / V RÖHM Z centric gripper Pneumatic A = Alternative jaw fixture by tongue and groove Sizes 64-300 Jaw stroke variant 1 = long stroke 2 = short stroke Optional: spring
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationTable of contents rotary cylinders. Pneumatic Rotor. Step-Rotor
Rotary Cylinders Table of contents rotary cylinders Pneumatic Rotor Order no. Pivot angle Torque Pivot time Catalogue no.. [ ] [Nm] [s] Product Information PRN-Series 6 PRN1-90-B 90 0,15 0,10 8 PRN1-180-B
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationSSP / SSH. Designs: Pneumatically operated (SSP) Hydraulically operated (SSH)
SSP / SSH chucks Technical features: Wedge system Quick and efficient chucking in stationary use Concentric gripping of round as well as angular parts Universal through use of different jaws Gripping force
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationPNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationGWS. Application example. Tool Changing Gripper Change System. Handling weight up to 170 kg. Moment load M x up to 400 Nm
GWS Sizes 064.. 125 Handling weight up to 170 kg Moment load M x up to 400 Nm Moment load M y up to 400 Nm Moment load M z up to 600 Nm Application example Replacing and placing tools in a gripper changing
More informationPWG. Application example. Pneumatic 2-Finger Angular Grippers Universal Angular Grippers. Sizes Gripping moment 6 Nm..
PWG Sizes 65.. 230 Weight 0.33 kg.. 16.3 kg Gripping moment 6 Nm.. 934 Nm Opening angle per finger 20 Workpiece weight 1.1 kg.. 43 kg Application example Rotary feed unit for shafts PWG 130-B 2-Finger
More informationSizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm kg. PZH-SF Finger Centric Gripper
Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm 59.7 8 kg Application example PZH-SF 350 3-Finger Centric Gripper Gamma Gantry Linear Module Gamma Gantry Linear Module
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationGrippers Parallel grippers
-finger parallel grippers -finger parallel grippers Product notes > Gripper with high gripping force > Double-acting for inside/outside gripping and short duty cycles > Single-acting: normally open (NO),
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationKONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)
KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50
More informationLVE - with large through-hole
LV - with large through-hole Sizes 400-1000 For the machining of large and long pipes as frequently used in the oil and gas industry. Flange-type workpieces can of course, be chucked as well. A very reliable
More informationLight. Fast. Flexible. SGW Small Components Gripper
SGW Light. Fast. Flexible. SGW Small Components Gripper Small, simple pressurised plastic angular gripper with spring return Field of Application Universal application in clean and slightly dirty environments,
More informationPWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.
PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary
More informationLOW PROFILE PNEUMATIC PARALLEL GRIPPER
LOW PROFILE PNEUMATIC PARALLEL GRIPPER Major Benefits Large hardened jaw drivg surfaces Low profile Two jaw travels per size Manifold portg options Four bore sizes with five gripper sizes available both
More informationMagnetic Sizes mm
CATALOGUE > Release 8.7 > Series CGB guided parallel grippers Series CGB guided parallel grippers Running out of stock Magnetic Sizes 6-20 - 25-32 mm»» Guided mechanism which allows high repeatability»»
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More informationPrecise. Compact. Reliable. MPZ Small Components Gripper
MPZ Precise. Compact. Reliable. MPZ Small Components Gripper Small 3-finger centric gripper with base jaws guided on T-slots Field of Application F or universal use in clean to slightly dirty working environments,
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More informationLong stroke grippers HGPL
Sturdy Gripping forces of up to 754 N Reliable Space saving 2004/10 Subject to change Products 2004/2005 1 / 3 Key features At a glance Space saving and suitable for high forces Two parallel and opposing
More informationProduct Information. Rotary gripping module with angular gripper RW
Product Information RW RW Flexible. Modular. Compact. Gripper Swivel Module RW Rotary gripper combination, consisting of a rotary module and a 2-finger angular gripper Field of application Gripping and
More information-U- Type discontinued. -H- Note. Available up until Angle grippers HGW Key features. 2 Internet:
Key features At a glance Double-acting piston drive Self-centring Variable gripping action: External/internal gripping Versatility thanks to externally adaptable gripper fingers Wide range of options for
More informationProduct Information. Gripper for small components RH 9010
Product Information RH 9010 RH cost-effective. Easy. Economical. RH gripper for small components The RH series is a cost-efficient gripping system, which is particularly suitable for simple cases of application.
More information45x90 Strut for mounting flexibility. Long life ceramic bearing
Grippers Extreme Force and Torque The concept was developed for applications that impart high acceleration to heavy objects or require extremely long, precisely positioned jaws. These applications put
More informationProduct Information. Gripper change system GWS
Product Information GWS GWS Flat. Robust. Strong. GWS gripper change system pneumatic gripper change system Field of application Fast conversion of production lines for other products; the use of various
More informationProduct Information. Long-stroke gripper PHL 32
Product Information PHL 32 PHL Flexible. Precise. Powerful. PHL long-stroke gripper 2-finger parallel gripper with large jaw stroke for large parts and / or a broad range of parts Field of application
More informationPARALLEL PNEUMATIC 3-JAW GRIPPER
PARALLEL PNEUMATIC 3-JAW GRIPPER Major Benefits 3 jaw design provides self-centerg and maximum contact between part and jaw toolg Low profile to grip force and jaw travel ratios Eight sizes available both
More informationpneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
More informationParallel grippers HGP, with protective dust cap
Key features At a glance Double-acting piston drive With protective dust cap for use in dusty environments (protection class IP54) Self-centring Variable gripping action: External/internal gripping High
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationPneumatic High Temperature Clamps and Grippers
Cam Type Gripper for Tubes Cam type gripper for handling of hot formed tubes. page 14.4 New products 14.0 Notes high temperature clamps and grippers are designed for applications in high ambient temperatures
More informationThree-point grippers DHDS
Key features At a glance General information Flexible range of applications Resilient and precise T slot guide of the gripper jaws High gripping forces with compact dimensions Gripper jaw centring options
More informationParallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
More informationLEG. Application example. Electrical 2-Finger Parallel Gripper Long-stroke Gripper. Gripping force 1050 N 1500 N. Weight 9 kg 11.
LEG www.comoso.com Size 760 Weight 9 kg 11.6 kg Gripping force 1050 N 1500 N Stroke per finger 281 mm Workpiece weight 15.75 kg 22.5 kg Application example Gripping unit for top loading and palettizing
More informationRadial grippers DHRS
Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping
More information-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationParallel grippers HGPC
Key features At a glance General The compact and low-cost parallel gripper consists of a two-part symmetrical housing. The piston moves traverse to the half-shell casing in an optimum housing design that
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationRadial grippers DHRS
Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping
More informationGRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities
GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position
More informationMGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX
Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.
More informationCost effective. Productive. Compliant. GSW-M Magnetic Gripper
Cost effective. Productive. Compliant. Magnetic Gripper Vacuum gripper for spindle interfaces is ideal for handling flat components. Field of Application Unit for automatic loading and unloading of machining
More informationFeed separators HPVS
Key features and peripherals overview At a glance 1 Corrosion-resistant thanks to stainless steel plunger 2 Optimum and precise adaption options using centring sleeves 3 Supply ports optionally on top
More informationKLM. Application example. Linear modules Pneumatic Stroke module. 1 Single base support, SOE Adapter plate, APL 121
KLM www.comoso.com Sizes 25.. 100 Mass 0.5 kg.. 5.18 kg Driving force 50 N.. 294 N Stroke 25 mm.. 225 mm Repeat accuracy ± 0.01 mm.. ± 0.015 mm Application example 4 5 3 3 6 7 2 2 8 1 1 Pneumatic two-axis
More informationParallel Gripper Series CGB
Parallel Gripper Series CGB Piston diameter 10, 16, 20, 25 and 32 mm, magnetic The guided parallel gripper mod. CGB is available in 4 different sizes and is equipped with a guide mechanism that offers
More informationOperating Instructions. Handling Components Grippers GPU / GPUI BA ENGLISH
Operating Instructions Handling Components Grippers GPU / GPUI BA-100008 ENGLISH Edition: 10/2005 Operating Instructions GPU / GPUI Change index Previous editions: Edition Note Reference number 10/2005
More informationParallel grippers HGPL-B, heavy-duty with long stroke
Key features At a glance Sturdy The T-slot in combination with the long guide length allows for high forces and torques Space-saving Two parallel and opposing pistons move the gripper jaws directly and
More information-H- Note. Angle grippers HGWC Key features. 2 Internet:
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationLVE - with integrated pneumatic cylinder
LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic
More informationPARALLEL PNEUMATIC HEAVY DUTY GRIPPER
PARALLEL PNEUMATIC HEAVY DUTY GRIPPER Major Benefits Compact, low profile design provides high grip force and large moment capacities with low overall weight. Ultra-rigid, wear-compensatg jaw guide system
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationGripper A F , 2 5, 3 0, 4 0, 5 0, 6 3, 9 0, Wedge type Base jaw Kinetics Mounting and positioning Precise T-slot guide Body Drive
Gripper AF30-20,25,30,40,,63,90,125 Character Compact structure by wedge guide driving unit Location pin hole at an each mounting side Possible to use without the supply tube when you use back side support
More informationParallel Grippers. Features. Operation. Contents. Mounting
Catalog 9-2/US Features Dowel Pin Holes Slip fit dowels located in gripper body and jaws. Body One piece hard coat anodized aluminum body with Teflon impregnation. Seals Self lubricating dynamic seals
More informationParallel grippers DHPS
Key features At a glance General information Flexible range of applications Resilient and precise T slot guide of the gripper jaws Oval piston for high gripping forces High gripping forces with compact
More informationIDEAL FOR STATIONARY USE
IDEAL FOR STATIONARY USE The stationary power clamping devices from RÖHM are predestined for stationary, centric clamping of round and angular workpieces on milling machines or machining centers or for
More informationGRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
More informationLVE - with integrated cylinder
LVE - with integrated cylinder Technical features: Wedge system with integrated clamping cylinder Large through-hole Scope of delivery: Chuck and jaw mounting screws, T-nuts (without top jaws) Unobstructed
More informationANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
More informationPOWER CHUCKS CYLINDERS / STEADY RESTS
POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive
More informationParallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
More information-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
More informationSRH. Application example. Pneumatic Swivel Heads Universal Swivel Head. Weight 2.1 kg kg. Axial force 800 N..
SRH www.comoso.com Sizes 20.. 60 Weight 2.1 kg.. 21.2 kg Axial force 800 N.. 9000 N Torque 3.0 Nm.. 69.9 Nm Bending moment 10.4 Nm.. 340 Nm Application example Swivel head for the rapid loading and unloading
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationINFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
More informationgrippers pneumatic precision parallel movement DPP DirectConnect Series
grippers pneumatic precision parallel movement DPP Directonnect Series DPP Series No Adaptor Plates Required! Shown smaller than actual size. D-1M-E--5 linear thruster slide. Precision Gripping Preloaded
More informationKFD-HE. Power chucks with through-hole
K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.
More informationLateral parallel hand Double acting. Operational stroke length: 20, 30, 40mm. 980m/s2
FH0 G G B H2 LB2 N/ S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationXRAY Grippers - Extreme Force and Torque. Patented Synchronous Technology - Extended Life
XRAY XRAY Grippers - Extreme Force and Torque The XRAY concept was developed for applications that impart high acceleration to heavy objects or require extremely long, precisely positioned jaws. These
More informationClamping cartridges/units
Clamping cartridges/units Holding, clamping and braking of round material Wide choice of variants Any assembly position 2017/11 Subject to change Internet: www.festo.com/catalogue/... 1 Clamping cartridges/units
More informationSlide units SPZ, twin piston
Key features Multi-axis and drive combinations The slide unit SPZ can be combined with different drives. An adapter kit is required for mounting between the two drives. DPZ-/SPZ axis Adapter kits www.festo.com
More informationRodless Pneumatic Cylinders Series OSP-P
s Series OSP-P Contents Description Page Standard Cylinders Overview 9-13 Technical Data 15-17 Dimensions 18-23 Clean Room Cylinders Technical Data 24-25 Dimensions 26 Cylinders ATEX-Version Technical
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
More informationFlexible. Light. Productive. LEG Long-stroke Gripper
LEG Flexible. Light. Productive. LEG Long-stroke Gripper Light long-stroke gripper for flexible and highly dynamic handling of various components Field of Application For use in a clean working environment,
More informationAGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads. Payload up to 100 kg. Compensation path XY up to ± 14 mm
AGE-S Sizes 100.. 200 Payload up to 100 kg Compensation path XY up to ± 14 mm Compensation path Z up to 12 mm Application example Picking up and setting down components from a rack with a 3-finger centric
More informationOil operated actuating cylinders without through-hole OVS,
OV Oil operated actuating without through-hole TEMPOONI stroke control measuring via magnetostrictivesensors measuring accuracy < 0,1 mm safe and consistent settings no wear, no maintenance no pre-settings
More informationCYLINDERS WITH TIE RODS Ø 25 to 200 mm - double acting CNOMO AFNOR with pneumatic cushioning
CYLIDERS WITH TIE RODS 25 to 200 mm - double acting COO 06-07-02 - AFOR with pneumatic cushioning S Series 437 Type PC GEERAL Detection Equipped for magnetic position detectors Fluid Air or inert gas,
More informationMini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks
More informationThe New Generation ISO Cylinders for a Dynamic Future
Electric Drives Linear Motion and and Controls Hydraulics Assembly Technologies Pneumatics Service The New Generation ISO Cylinders for a Dynamic Future Rexroth s new generation of ISO pneumatic cylinders
More informationSFL. Application example. Pneumatic Rotary Actuators Rotor. Weight kg. Axial force N. Sizes 25..
SFL Sizes 25.. 64 Weight 0.09.. 0.71 kg Torque 0.12 Nm.. 3.9 Nm Axial force 10.. 50 N Bending moment 0.1.. 0.5 Nm Application example Sorting unit with SFL rotor to drive the separator switch Rotor SFL
More informationFOR EVERY APPLICATION
FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders without through-hole in their product range. hydraulical
More informationStandard gripper Series GSP
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Standard gripper Series GSP Technical Data Products Series GSP-P
More information