SSP / SSH. Designs: Pneumatically operated (SSP) Hydraulically operated (SSH)
|
|
- Philomena Randall
- 5 years ago
- Views:
Transcription
1 SSP / SSH chucks Technical features: Wedge system Quick and efficient chucking in stationary use Concentric gripping of round as well as angular parts Universal through use of different jaws Gripping force adjustable by changing the pressure High chucking accuracy thanks to constant gripping force at constant pressure Compact design Blast air terminal against dirt accumulation Used in conjunction with RÖHM actuating cylinders with safety device SZS, OVS, LHS-L, LVS, EHS and EVS the power chucks SSP / SSH meet the requirements of the German Employers Insurance Association Designs: Pneumatically operated (SSP) Hydraulically operated (SSH) chucks Components 1. Body 2. Base jaw 3. Piston 4. Protective bushing 5. Intermediate disc 6. Mount 7. Piston disc 8. T-nut 9. Top jaws 6215
2 chucks SSH 2-/3-jaw, hydraulically operated, without through-hole Tool group C 15 Type chucks SSH, hydraulically operated 2-jaw and 3-jaw chucks, without through-hole, serration 1 / 16 x 90 Item no Size Number of jaws A A Jaw travel B 4,2 4,2 4,2 4, C 133,5 133, ,5 159,5 Mount D H D M8 M8 M12 M12 M16 M16 M16 M16 F G ,5 21,5 Wedge stroke K ,8 23,8 28,4 28,4 28,4 28,4 Possible through-hole M T 134,5 134,5 135,5 135,5 152,5 152, U M8 M8 M12 M12 M16 M16 M16 M16 a min. 31,8 31,8 41,2 41, ,5 61,5 a max ,4 45, ,5 66,5 c d 54,5 54, e f H g Piston area cm 2 32,4 32, Max. operating pressure / clamping bar Max. operating pressure / opening bar Max. total clamping force at max. operating pressure - External clamping kn Max. total clamping force at max. operating pressure - Internal clamping kn Weight without jaws approx. kg Stationary Power chucks with serration 1,5x60, tongue and groove and/or through-hole on request available chuck SSH from stock 4-6 weeks on request 6217
3 Jaws SSP / SSH chucks Reversible top jaws, 2-jaw set, hardened ,5 26 1/16 x / /16 x / , /16 x 90 Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. Reversible top jaws, 3-jaw set, hardened ,5 26 1/16 x /16 x / , /16 x 90 Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. Soft top jaws, 2-jaw set, can be hardened ,5 1/16 x / ,5 1/16 x ,5 45 1/16 x 90 Jaws SSP / SSH Soft top jaws, 3-jaw set, can be hardened ,5 1/16 x ,5 1/16 x ,5 45 1/16 x from stock 4-6 weeks on request
4 Jaws SSP / SSH chucks Type Claw-type jaws, 1 piece, hardened width of the groove 12 Item no. Chuck Size Jaw length Jaw height Jaw width Type Claw-type jaws, 1 piece, hardened width of the groove 17 Item no. Chuck Size Jaw length Jaw height Jaw width Type Claw-type jaws, 1 piece, hardened width of the groove 21 Item no. Chuck Size Jaw length Jaw height Jaw width / / / / / / Accessories SSP / SSH Tool group C 15 Type Extended T-nuts without screw Tool group C 15 Type 0040-Y Mounting screws Jaws SSP / SSH E G D Item no. Chuck Size Contents of delivery A D E G /175 piece M8 2x piece M ) 315 piece M16 25 Item no. Size Contents of delivery Thread piece M8x /254/315 piece M12x piece M16x35 Socket head cap screw to DIN 912, 12.9 A from stock 4-6 weeks on request 6219
5 chucks Jaw dimensions SSP / SSH Reversible top jaws UB, hardened, serration 90 o Chuck size /315 Type Item no. 2-jaw Item no. 3-jaw A ,5 B C 37, DH E 3,5 5 5 F 14 21,5 33,5 G H 29 37,5 45 J 8, K 13, L M N O 4 7,5 6,5 P ,5 Q ,5 R 1/ 16 "x90 o 1/ 16 "x90 o 1/ 16 "x90 o Weight/jaw kg 0,170 0,460 1,130 Soft top jaws AB, serration 90 o, Chuck size Type Item no. 2-jaw Item no. 3-jaw A 66, B 36, C 53 54,5 80 D E F G H 43 42,5 67 J K Q R 1/ 16 "x90 o 1/ 16 "x90 o 1/ 16 "x90 o Weight/jaw kg 0,700 1,400 2,580 chuck SSP/SSH Soft top jaws AB, tongue and groove Chuck size Type Item no. 2-jaw Item no. 3-jaw A 72,7 90,3 115,3 146 B 36,5 36, C ,5 80 D -0, E 5,5 5,5 5,5 5,5 F 32,5 45,3 58,3 63,5 G H J K L 4,5 4,5 4,5 4,5 M+0, N 24,7 35,3 45,3 43 O P 39,7 54,3 70,3 80,5 Q Weight/jaw kg 0,720 1,000 1,550 3,
6 chucks Jaw dimensions SSP / SSH Claw type jaws KB, serration 90 o Chuck size A B 160 Item no. piece Capacities external Capacities internal Item no. Piece A B 200 Capacities external Capacities internal Item no. Piece A B Capacities external Capacities internal Chucking capacities SSP / SSH chuck SSP/SSH Chucking capacities with reversible top jaws UB Chuck size with reversible jaws Type Jaw position A External chucking A A A J Internal chucking J J
IDEAL FOR STATIONARY USE
IDEAL FOR STATIONARY USE The stationary power clamping devices from RÖHM are predestined for stationary, centric clamping of round and angular workpieces on milling machines or machining centers or for
More informationLVE - with integrated cylinder
LVE - with integrated cylinder Technical features: Wedge system with integrated clamping cylinder Large through-hole Scope of delivery: Chuck and jaw mounting screws, T-nuts (without top jaws) Unobstructed
More informationKFE. Power-operated compensating chuck. Techincal features
Power-operated compensating chuck Techincal features Toggle joint lever system Compensation for eccentricities is accomplished by means of a universal ball joint. Large through-hole Made of steel All moving
More informationKFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features:
Power cucks witout troug-ole K-EC / K--EC Tecnical features: Easy Care: low-maintenance and wear resistant Abrasionproof coating of te base jaw guidings Improofed dirt protection by integrated jaw guiding
More informationKFD. Power chucks without through-hole. Technical features:
K Power cucks witout troug-ole Tecnical features: Proved power cuck wit ig load carrying capacity, long life and ig workolding accuracy Te operating power is transmitted by means of a sturdily dimensioned
More informationKFD-HE. Power chucks with through-hole
K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating
More informationKFD-HE. Power chucks with through-hole
K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.
More informationDURO-NC. Power chucks with quick-acting jaw change system. Technical features:
K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted
More informationPOWER CHUCKS CYLINDERS / STEADY RESTS
POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive
More informationLVE - with large through-hole
LV - with large through-hole Sizes 400-1000 For the machining of large and long pipes as frequently used in the oil and gas industry. Flange-type workpieces can of course, be chucked as well. A very reliable
More informationLVE - with integrated pneumatic cylinder
LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic
More informationKFD-HS. Power chucks with through-hole. Technical features:
K-S ower cucks wit troug-ole ecnical features: Wedge ook system wit annular piston for igest accuracy in case of loss of centrifugal force bove-average mecanical efficiency Very few components, long jaw
More informationNEW POWER-OPERATED CENTERING VICES. Economic and automated clamping with maximum clamping forces and reduced interfering contour
NEW POWER-OPERATED CENTERING VICES Economic and automated clamping with maximum clamping forces and reduced interfering contour POWER-OPERATED CENTERING VICES The new power-operated centering vices have
More informationSteel / Cast iron body Independent chucks
Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design
More informationFOR EVERY APPLICATION
FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders without through-hole in their product range. hydraulical
More informationQUICK-ACTING JAW CHANGE SYSTEM
QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire
More informationOil operated actuating cylinders without through-hole OVS,
OV Oil operated actuating without through-hole TEMPOONI stroke control measuring via magnetostrictivesensors measuring accuracy < 0,1 mm safe and consistent settings no wear, no maintenance no pre-settings
More informationUSE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
More informationChuck size
URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck
More informationOKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
More informationNOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove
NOMENCLATURE RZP -A - 100-1 / GA / V RÖHM Z centric gripper Pneumatic A = Alternative jaw fixture by tongue and groove Sizes 64-300 Jaw stroke variant 1 = long stroke 2 = short stroke Optional: spring
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INDIVIDUALLY ADJUSTABLE The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationLATHE CHUCKS INDEPENDENT CHUCKS
LATHE CHUCKS INDEPENDENT CHUCKS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and
More informationZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS
The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on
More informationEconomy - ZGF. Two-jaw lathe chucks. Two-jaw lathe chucks ZGF. Suitable for use on ground and basic plates.
Economy - ZGF Two-jaw lathe chucks Suitable for use on ground and basic plates. Technical features: - with scroll - unstepped soft top jaw - cast iron body - DIN 6350 - DIN 6350 - lathe chucks must be
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More informationFOR EVERY APPLICATION
FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders with through-hole in their product range. hydraulical
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy
ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high
More informationProduct overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
More informationCollet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationGeared scroll chucks with independently adjustable jaws
Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,
More informationStationary chucks pneumatic/hydraulic
Stationary chucks pneumatic/hydraulic US-CL US-A With 2 jaws With long or long stroke chucks normal stroke chucks Stationary cylinder and chuck unit, hydraulic Ø 80-315 mm unit with static cylinder and
More informationWBLKL Soft Block Jaws
NSTK T- sliding block Jaw holder system WBLKL Soft Block Jaws Dimensions /Performance data WBLKL Jaw mounting D Chuck Jaw type Ident No. Weight type each jaw A B C D B1 B2 C1 J (kg) 3QLC/QLK 160 WBLKL
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationEUROPEAN PRECISION AND QUALITY POWER CHUCKS 3-JAW LARGE, EXTRA LARGE THRU HOLE & CLOSED CENTER
EUROPEAN PRECISION AND QUALITY POWER CHUCKS 3-JAW LARGE, EXTRA LARGE THRU HOLE & CLOSED CENTER TMX Power s Featuring the quality and precision associated with European manufacturing, TMX Power s are direct,
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More information86P40-2, 86P60-2 Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information
86P40-, 86P60- Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information Application: Accurate positioning of sheet metal parts in welding equipment and handling systems. At the
More informationCoA. Constant Face Drivers. Constant Face Drivers CoA
CoA Constant Face Drivers CoA - hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationLATHE CHUCKS INDEPENDENT CHUCKS
LTHE HUKS INDEPENDENT HUKS 2015/2016 We work for customers who have a weakness for our strengths. ompanies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationHG-F. Quick jaw change ma JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
Quick jaw change ma JAWS SYSTEM FORKARDT For highest speeds Flat gripping force curve 18 16 315 Mdmax. Jaw change in less than 1 minute F G total gripping force (3 jaws) (kn) 14 12 1 8 6 4 2 26 21 16 26
More informationenduring. Drill Chucks NC-Tooling 2013/2014
enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type
More informationHG-F JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
SYSTEM FORKARDT JAWS Quick jaw change ma For highest speeds Flat gripping force curve 18 315 16 Mdmax. FG Jaw change in less than 1 minute FG total gripping force (3 jaws) (kn) 14 26 12 1 8 21 6 16 4 2
More informationPWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.
PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary
More informationPower Chucks B & BT Series
Power Chucks B & BT Series B Series Three-jaw and two-jaw wedge style power chucks are ideal for high speed chucking, bar chucking and universal machining. These deliver consistent accuracy and repetitive
More information1Mounting and positioning - mounting possible from several sides for versatile positioning. 2Permanent magnet - installed in the piston area
2-Jaw Parel Series GP8 pneumatic Product information: Sealed square guide Sealed with additional wiper High precision due to low play guide Optimum transfer of power to gripping force Positioning of the
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationPin Packages Section.Page. Series. Dimensions and technical information are subject to change without notice. Air Consumption at 5 bar [dm3]
Pin Packages 6. Pushing Force (N) at 5 bar Retracting Force at 5 bar Piston Diameter Weight Air Consumption at 5 bar [dm3] Application Area Series Section.Page 0 to 500 [N] 500 to 000 [N] 000 to 500 [N]
More informationDouble-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm
CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
More informationQuick jaw change power chucks
Quick jaw change power chucks Page 110 Page 120 Page 124 Page 124 Page 12 Page 18 proofline series fully sealed low maintenance Page 1 proofline series fully sealed low maintenance Page 142 KNCS N Quick
More information3QLC, 3QLK, 3QLC-KS, 3QLK-KS 2QLC-LS, 3QLC-LS, 3QLC-AG, QLC-KT Power Chucks
3QLC, 3QLK, 3QLC-KS, 3QLK-KS 2QLC-LS, 3QLC-LS, 3QLC-AG, QLC-KT Power Chucks This catalogue describes the key components of a power chucking system featuring the following FORKARDT power chucks: QLC, QLK,
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More informationPneumatic Power Clamps
15.61 Pneumatic Power Clamps Series 82M-6 Product Overview (last time in catalog) Features: modular design shielded body, dirt-resistant compact design high holding torques long life cycle low weight (aluminium
More informationIndexing chucks Shaft chucks Column chucks
Pull-down chucks ompensating chucks Indexing chucks Shaft chucks olumn chucks Page 100 Page 102 Page 10 Page 106 Page 108 TSF- TSR- Self centering Self centering Pull-down chucks Ø 170-650 mm tongue &
More informationNEW ELECTRICAL CYLINDER WITH AND WITHOUT THROUGH-HOLE. Efficient - Precise - Energy saving
NEW ELECTRICAL CYLINDER WITH AND WITHOUT THROUGH-HOLE Efficient - Precise - Energy saving ELECTRICAL CYLINDER WITH AND WITHOUT THROUGH-HOLE Electric clamping systems are still at the starting point of
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationtough. Live Centers Face Drivers 2013/2014
tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationStandard Cylinder Series SZ 100
Standard Cylinder Series SZ 100 Maximum operating pressure up to 100 bar Choice of 13 different piston sizes between 12 und 200mm and 23 different attachments Rugged yet compact design with good guiding
More informationbl 8 bm 1Robust, lightweight housing - hard coated aluminium alloy
2-Jaw Parel Series GP4X pneumatic Product information: Overlapping, extremely robust T-Slot guide for maximum force and moment resistance Gripper jaws made of ground surfaced and hardened steel ensuring
More informationSpare part list AutoCUT 500. Pos. No. Article no. Description pc Feed unit complete 1
AutoCUT 500 Article no. Description pc 1 8020901 Feed unit complete 1 2 8020911 Mill unit 1 3 8020921 Steering mechnism complete 1 4 8020861 Coasting rail complete 1 5 8020871 Intake rail complete 1 6
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationElectric pump EP-1. Electric pump with 1.9 kg reservoir:
The BEKA-MA central lubrication pump model EP-1 is electrically actuated and has up to a maximum of independently operating lubricant outlets. A separate pump element is required for each outlet. Three
More informationLight. Fast. Flexible. SGW Small Components Gripper
SGW Light. Fast. Flexible. SGW Small Components Gripper Small, simple pressurised plastic angular gripper with spring return Field of Application Universal application in clean and slightly dirty environments,
More informationOPTIMAL COMPONENT SUPPORT. Optimal support of components for every application, e.g. crankshaft machining.
OPTIMAL COMPONENT SUPPORT Optimal support of components for every application, e.g. crankshaft machining 6150 SELF-CENTERING STEADY RESTS With self-centering steady rests, RÖHM makes an important contribution
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationPPU, PHU Piston Pumps for progressive grease and oil systems, pneumatically or hydraulically actuated
1-0107-5-EN PPU, PHU Piston Pumps for progressive grease and oil systems, pneumatically or hydraulically actuated These piston pumps are available with two different delivery rate ranges. The pumps can
More information3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
More informationHydraulic clamping elements
Hydraulic clamping elements hydraulic 3 Contents Product group 3 Hollow piston cylinder single-acting 3.1403 3.2130 Sliding clamp single-acting compact classic 3.2202 3.2204 Angular clamping element single
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationTH mm depending on jaw type. Further couplings on request. Steel, nickel-plated. Further temperature ranges on request
WEDGE GRIPS 100, 150, 250, 300, 500 KN Universal grips with lower wedge angle (11 ) for many kinds of materials such as aluminium, copper, weak steel till 30 HRC round and flat. We do not recommend these
More informationThe original quick jaw change power chuck. High repeatability when changing jaws
Fast changeover, fast payback: The original quick jaw change power chuck KNCS N Easy lubrication even on vertical machines with 3 radial builtin grease fittings Minimal setup times Jaw change in less than
More informationHydraulic Clamping Systems
Hydraulic Clamping Systems Hydraulic screw-in cylinder, single action Operating pressure max. 350 bar / min 100 bar These hydraulic crew-in cylinder are single acting and with spring retraction. They can
More informationZU series. 100 bar universal cylinder. Determine your 100 bar universal cylinder:
ZU series 100 bar universal cylinder Piston Ø 10-100 mm Lengths of stroke at your option (take account of the bend resistance, see page 35) Standard lengths of stroke Round, compact design; black blued
More informationSeparators. pneumatic
Separators pneumatic Table of contents separators VEG-B Order no. Stroke Force in Force in Page [mm] retract [N] extend [N] Product Information 6 VEG10-B 10 30 40 10 VEG14-B 20 65 80 12 VEG15-B 40 65
More informationSPV CMV-R MMV CMV-S PCV APV PSV PLV DDV MDV 222P 234P 236P 223P 224P 238P 226P 240P 228P 230P 232P 233P. Flexible Vise. Serration type.
VISE SPV Serration type Power 222P FV Flexible 234P CMV-R Self centering 5-Axis 223P VS Standard Machine 236P CMV-S Self centering 5-Axis 224P MMV Mechanical Machine Quick 238P PCV Standard Power 226P
More informationBridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since
Bridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since 1948. 49 Rev. 2010-04-14 Economically priced Robust design
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationInstallation and Operating Instruction for Brake Caliper HW 150 HFA and HW 180 HFA E e
Installation and Operating Instruction for Brake Caliper HW 150 HFA and HW 180 HFA E 09.736e Schaberweg 30-38 Phone +49 6172 275-0 61348 Bad Homburg Fax +49 6172 275-275 Germany www.ringspann.com info@ringspann.com
More informationDouble and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP
CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»
More information82L Series. Pneumatic Power Clamps Ordering Information 03 B8 H 82L 2G B PC-PPC-15. Base Model Size Description 2G 3G 3N 4G 4N
82L..-2... Series Pneumatic Power Clamps Ordering Information 82L 2G B -2 3 B8 H Base Size Description Arm Style Description 2G 3G 3N 4G 4N Ø25 (G1/8) Cylinder Bore Size Ø32 (G1/8) Cylinder Bore Size Ø32
More informationGlobe Valve Type Fig. 1 Type 3241 Globe Valve. Mounting and Operating Instructions EB EN
Globe Valve Type 3241 Fig. 1 Type 3241 Globe Valve Mounting and Operating Instructions EB 8015-1 EN Edition July 2012 Contents Contents Page 1 Design and principle of operation.................... 4 2
More informationSTEVI 450 / way control valve in mixing and diverting design DN
STEVI 450 / 451 with electric and pneumatic actuators 3-way control valve in mixing and diverting design DN 15-150 STEVI 450 / 451 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel
More informationSELF CENTERING STEADY REST LE /LZ /LA
SELF CENTERING STEADY REST LE /LZ /LA This catalog lists all self centering Steady Rests and their accessories. Note: Dimensions and data given in this catalog may not always correspond to the latest design
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT
More informationINSTALLATION MANUAL. Drive line rebuild kit for MF class 8 p/n 13645
INSTALLATION MANUAL 2011-05-09 Drive line rebuild kit for MF class 8 p/n 13645 Rekordverken k Sweden AB Öttum 535 92 KVÄNUM Tel. +46-511-303 00 Fax. +46-511-303 01 T0868 1 Foreword Description of rebuild
More informationPneumatic Metering Pump II 3 12 l/h
Works without electrical current Mechanical stroke adjustment Space-saving design Separate air bleeding High reliability due to teflon compound diaphragm Optional with integrated solenoid valve Pneumatic
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationPOWER CHUCKS KTN / KTG / KS
POWER CHUCKS KTN / KTG / KS This catalogue features details of the range of FORKRT KT and KS power chucks. Should you require further information beyond the data contained in this catalogue, please refer
More information