PNEUMATIC ASSEMBLY TOOLS

Size: px

Start display at page:

Download "PNEUMATIC ASSEMBLY TOOLS"

Marcia Watkins
5 years ago
Views:

1 PNEUMATIC ASSEMBLY TOOLS Contents Pge Introduction Screwdrivers 12 Pistol grip models Stright models Angle models Impct wrenches 23 Pistol grip models Stright models Hydrulic impulse nutrunners 28 ErgoPulse Pistol grip models Stright models Controlled impulse nutrunners 37 Pulsor C Nutrunners 40 Angle models Stright models Pistol grip models... 62

Introduction Pneumtic Assembly Tools Fst, ccurte nd opertor friendly Atls Copco supplies brod rnge of pneumtic ssembly tools designed to give you highest possible productivity on your ssembly line.

High productive tools mens less ir consumption tht trnsltes into big energy svings since energy consumption nd CO 2 emissions re reduced.

2 Introduction Pneumtic Assembly Tools Fst, ccurte nd opertor friendly Atls Copco supplies brod rnge of pneumtic ssembly tools designed to give you highest possible productivity on your ssembly line. The result of decdes of development, the tools include ergonomiclly designed screwdrivers, pulse tools, nutrunners nd impct wrenches, tht offer superior productivity. High productive tools mens less ir consumption tht trnsltes into big energy svings since energy consumption nd CO 2 emissions re reduced. Vibrtion nd noise levels re minimized, power-to-weight rtios re high. It ll dds up to mximum opertor comfort nd highest individul productivity. IMPACT WRENCHES (LMS) Impct wrenches hve unmtched speed nd power-to-weight chrcteristics, which mkes them idel e.g. for loosening pplictions. They productify rw power nd cover wide torque rnge including both non shut-off nd shut-off models. They re lso rection free. IMPULSE TOOLS (ERGOPULSE XS, PTS, PTX) Impulse tools re the idel choice for fst nd rection-free one-hnd tightenings. They hve the sme dvntges s impct wrenches but with higher ccurcy. In ddition you will get tool with good ergonomics, which mens lower sound levels nd less vibrtions. Pulse tools lso hve longer service life. They come in non shut-off nd shut-off version. CONTROLLED IMPULSE TOOLS (PULSOR C) The Pulsor C is further developed pulse tool with dvnced error-proofing functionlity. It is multi torque pulse tool for qulity criticl tightenings offering complete control of the tightening process with result reporting. SCREWDRIVERS We offer wide rnge of extremely ccurte, ergonomiclly designed screwdrivers for ll kinds of jobs involving smller screw sizes, up to M6. All models re lubriction-free. l Shut off control (LUM) Best prctice in most cses, especilly for mchine screws nd screws in plstic. Very good ccurcy nd lowest bit consumption. NUTRUNNERS Suitble for ll kinds of tightening tsks from 0.5 Nm, nutrunners in Atls Copco s extensive rnge re extremely ccurte. Due to their ergonomic designs they re lso very comfortble to operte. All models re lubriction-free. l Angle nd stright type (LTV, LTD) Accurte workhorses for limited spces suitble for high volume seril production. Very good ccurcy, smll ngle hed nd possible to ttch specil heds. Low noise nd vibrtion levels. l Pistol grip type (LMP, LTP) High torque tools for super fst, ccurte tightenings. Low noise, nd low vibrtion tools for opertor comfort. RTP NUTRUNNERS Whtever your industry, if your opertions include loosening or tightening hevy duty bolts, Atls Copco s slim, lightweight RTP pneumtic nutrunner cn help increse your productivity. Among the smllest on the mrket, the RTP s slim gerpck gives you effortless ccess to bolts in crmped spces. Tightening ccurcy nd repetbility re high. Noise nd vibrtion levels re lower thn in trditionl impct wrenches. l Direct drive (LUD, LUF, HRD) The low cost lterntive for wood nd self drilling screws. l Slip clutch (TWIST, LUF) Best for sheet metl screws, wood screws or self tpping screws. 10 Pneumtic Assembly Tools

Selection Guide Recommended torque bolt grde 8.8 M1.6 M2 M2.5 M3 M4 M5 M6 M8 M10 M14 M12 M16 M20 M24 M30 M36 M42 IMPACT WRENCHES 0.1 0.

3 Selection Guide Recommended torque bolt grde 8.8 M1.6 M2 M2.5 M3 M4 M5 M6 M8 M10 M14 M12 M16 M20 M24 M30 M36 M42 IMPACT WRENCHES Non shut-off 7 LMS 5500 PULSE TOOLS Non shut-off 5 ErgoPulse XS 400 Shut-off 2 ErgoPulse PTS/PTX 900 Controlled 16 Pulsor C 400 SCREWDRIVERS Direct drive 2 LUD 18 Slip clutch 1 TWIST/LUF 17 Shut-off 0.03 LUM 18 NUTRUNNERS Angle hed type Pistol grip type 0.5 LTV LMP LTP RTP 4100 Stright type 5 LTD 1500 Recommended torque bolt grde 8.8 Nm TORQUE RECOMMENDATIONS The torque is importnt to ensure the required clmping force. The tble shows the recommended mx tightening torque for the most common types of screws nd bolts: untreted, oil-smered screws (friction coeffi cient = 0.125) with metric corse thred. The torque corresponds to pproximtely 62% of tensile stress. M threded screws/bolts Tightening torque Nm, ccording to ISO 898/1 Bolt grde Bolt grde Thred Thred M M M M M M M M M M M M M M M M M M M M M M M M Pneumtic Assembly Tools 11

Introduction Pneumtic Screwdrivers High ccurcy, good ergonomics Atls Copco pneumtic screwdrivers bring ccurcy nd good ergonomics into the production process, while offering robust, relible designs.

In this rnge of pneumtic screwdrivers, the proven nd ptented Atls Copco clutch design gives high torque ccurcy nd repetble results over time.

All Atls Copco screwdrivers cn be used s lubrictionfree. A COMPLETE RANGE Our pneumtic screwdrivers re vilble in pistol grip, ngle nd stright configurtions.

4 Introduction Pneumtic Screwdrivers High ccurcy, good ergonomics Atls Copco pneumtic screwdrivers bring ccurcy nd good ergonomics into the production process, while offering robust, relible designs. The rnge includes models to fit ny low torque ppliction. The tools re vilble in pistol grip, ngle nd stright configurtions with drive types spnning wide rnge of speeds nd torques. In this rnge of pneumtic screwdrivers, the proven nd ptented Atls Copco clutch design gives high torque ccurcy nd repetble results over time. All screwdrivers re lightweight, with optimum non-slip grip nd hndle design for opertor comfort. A fst shut-off clutch give minimum rection impulse, thus reducing opertor strin. All Atls Copco screwdrivers cn be used s lubrictionfree. A COMPLETE RANGE Our pneumtic screwdrivers re vilble in pistol grip, ngle nd stright configurtions. The LUM, TWIST, LUF nd LUD models re pistol grip nd stright tools, nd the LTV is n ngle tool. SLIP CLUTCH TYPE SCREWDRIVERS TWIST nd LUF HR screwdrivers hve slip clutch tht pplies pulsting force when the torque level is reched. These tools re suitble where the torque level my temporrily rise during the rundown phse, for instnce when using sheet metl screws, wood screws or self tpping screws. DIRECT DRIVE TYPE SCREWDRIVERS LUD nd LUF HRD re direct drive screwdrivers tht stll when finl torque is reched. The torque level is djusted by regulting the ir pressure. LUD nd LUF HRD re minly used for self-drilling nd wood screws. SHUT-OFF TYPE SCREWDRIVERS LUM nd LTV models hve fst nd ccurte shut-off clutch for smooth performnce nd high qulity tightening. They re suitble for joints with demnds on torque ccurcy, providing ccurte tightening time-fter-time, independent of vritions in joint stiffness. Electro Sttic Dischrge (ESD) pproved models nd RE models re vilble in this rnge. RE models enble signl to be received from the tool, in order to control btch count. All RE models need to be combined with n externl RE control system. Shut-off tools re the best choice for mchine screws, thred-rolling screws nd thred-forming screws for plstic. 12 Pneumtic Screwdrivers Pneumtic Assembly Tools

5 Selection Guide SCREW TYPE Mchine screw 4.8 Property clss 4.8 norml for cross recessed nd slotted screws Mchine screw 8.8 Property clss 8.8 norml for hexgon, Allen hed nd Torx. Locking nut with plstic insert, increse torque 10%, mechnicl-lock nut, increse torque 20% Thred rolling screw-m Property clss between 8.8 nd 10.9 due to cse hrdening. Tptite nd Swgeform re exmples Thred forming screw-st Thred forming screw-st for plstic Self drilling screw-st Wood screw Ø Screw size Torque Nm/in lb Recommended tool Ø Screw size Torque Nm/in lb Recommended tool Ø Screw size Torque Nm/in lb Recommended tool Ø Screw size Torque Nm/in lb Recommended tool Ø Screw size Torque Nm/in lb Recommended tool Ø Screw size Torque Nm/in lb Recommended tool Torque Nm/in lb Recommended tool SCREWDRIVER M1.6 M2 M2.5 M3 M3.5 M4 M5 M6 0.09/ / / / / / / /43.4 LUM02 LUM10 LTV009 LUM12 LUM22 LTV19 LUM32 M1.6 M2 M2.5 M3 M3.5 M4 M4.5 M5 M6 0.2/ / / / / / / / /86.7 LUM02 LUM10 LUM12 LUM22 LTV009 LTV19 LUM32 M2 M3 M4 M5 M6 0.5/ / / / /97.3 LUM02 LUM10 LUM12 LUM22 LTV009 LTV19 LUM32 ST2.2 ST2.9 ST3.5 ST4.2 ST4.8 ST5.5 ST / / / / / / /80.5 ST2.2 ST2.9 ST3.5 ST4.2 ST4.8 ST5.5 ST / / / / / / /80.5 LUM02 LUM10 LUM12 LUM22 LTV009 TWIST12/22 LUF34 LTV19 LUM32 ST2.2 ST2.9 ST3.5 ST4.2 ST4.8 ST5.5 ST / / / / / / /80.5 TWIST12 LUD LUF34 1.5/13.3 3/26.5 5/ / /106.2 LUD12/22 TWIST12/22 LUF34 Shut-off clutch Slip clutch Direct drive With optionl coupling-ring. Ordering No With optionl spring. Ordering No Pneumtic Assembly Tools Pneumtic Screwdrivers 13

Pistol Grip Models Shut off The LUM pistol grip rnge comes in severl different confi gurtions: HR: Model with non-blnced grip cn be used with high grip when feed force is needed or with low grip for

The LUM32 model hs the highest force to weight rtio mongst the pneumtic screwdrivers. It is lso tool with low rection force nd fst shut-off becuse of the position of the clutch.

6 Pistol Grip Models Shut off The LUM pistol grip rnge comes in severl different confi gurtions: HR: Model with non-blnced grip cn be used with high grip when feed force is needed or with low grip for miniml rection force. HRX: Model with blnced grip perfectly blnced for stndrd pistol grip pplictions. HRF: Blnced grip with multiple ir inlets for fl exible connection. The LUM32 model hs the highest force to weight rtio mongst the pneumtic screwdrivers. It is lso tool with low rection force nd fst shut-off becuse of the position of the clutch. RE reporting models re vilble, designted with suffi x RE. Air consumption Rec. Air Torque rnge Free t hose inlet soft joint speed Weight Length CS distnce free speed size thred Model Nm in lb r/min kg lb mm mm l/s cfm mm in Ordering No. With trigger strt LUM22 HR / LUM22 HR / LUM22 HR4-RE / LUM22 HR / LUM22 HR6-RE / LUM22 HR / LUM22 HR10-RE / LUM22 HR / LUM22 HR12-RE / LUM22 HR / LUM32 HR / LUM32 HR / With trigger nd push strt LUM22 HR3-P / LUM22 HR4-P / LUM22 HR6-P / LUM22 HR10-P / LUM22 HR12-P / LUM22 HR P / Continued Pneumtic Screwdrivers Pneumtic Assembly Tools

7 Shut off Pistol Grip Models Air consumption Rec. Air Torque rnge Free t hose inlet soft joint speed Weight Length CS distnce free speed size thred Model Nm in lb r/min kg lb mm mm l/s cfm mm in Ordering No. Blnced grip models with trigger strt LUM12 HRX / LUM12 HRX / LUM12 HRX / LUM12 HRX3-RE / LUM12 HRX / LUM12 HRX5-RE / LUM12 HRX / LUM12 HRX5-350-RE / LUM12 HRX / LUM12 HRX / LUM12 HRX / LUM12 HRX8-RE / LUM22 HRX / LUM22 HRX / LUM22 HRX / LUM22 HRX / LUM22 HRX / LUM22 HRX / LUM22 HRX6-RE / LUM22 HRX / LUM22 HRX10-RE / LUM22 HRX / LUM22 HRX / LUM22 HRX12-RE / LUM22 HRX / LUM22 HRX / LUM22 HRX / LUM22 HRX RE / LUM22 HRX / Multiple ir inlet models with trigger strt LUM12 HRF / LUM12 HRF / LUM12 HRF / LUM12 HRF / /4" squre drive. All models: Are reversible nd hve quick chnge chuck. All dt t n ir pressure of 6.3 br. For opertor comfort support hndle is recommended for high torque, see Optionl Accessories. Pneumtic Assembly Tools Pneumtic Screwdrivers 15

Pistol Grip Models Direct Drive The LUD nd LUF pistol grip rnge comes in severl different configurtions: HR/HRD: Model with non blnced grip cn be used with high grip when feed force is needed or with

Air Torque rnge Free CS t hose inlet soft joint speed Weight Length distnce free speed size thred Model Nm in lb r/min kg lb mm mm l/s cfm mm in Ordering No. With trigger strt LUD12 HRX2 1-2.5 8.8-22.

8 Pistol Grip Models Direct Drive The LUD nd LUF pistol grip rnge comes in severl different configurtions: HR/HRD: Model with non blnced grip cn be used with high grip when feed force is needed or with low grip for miniml rection force. HRX: Models with blnced grip re perfectly blnced for stndrd pistol grip pplictions. Air consumption Rec. Air Torque rnge Free CS t hose inlet soft joint speed Weight Length distnce free speed size thred Model Nm in lb r/min kg lb mm mm l/s cfm mm in Ordering No. With trigger strt LUD12 HRX / LUD12 HRX / LUD12 HRX / LUD22 HR / LUD22 HR / LUD22 HR / LUF34 HRD / LUF34 HRD / LUF34 HRD / Reversible drill, tpper nd screwdriver COMBI22 HR / COMBI22 HR / COMBI22 HR / COMBI34 HR / COMBI34 HR / COMBI34 HR / All models: Are reversible. Are equipped with 1/4'' femle hexgon drive for bits. Combi-tools re delivered with drill chuck nd 1/4" fe mle hex drive for bits. Torque rnge is reched by djusting the ir pressure between minimum 3 br nd mximum 6 br. 16 Pneumtic Screwdrivers Pneumtic Assembly Tools

Slip clutch Pistol Grip Models The TWIST nd LUF pistol grip rnge comes in severl different configurtions: HR: Model with non-blnced grip cn be used with high grip when feed force is needed or with

9 Slip clutch Pistol Grip Models The TWIST nd LUF pistol grip rnge comes in severl different configurtions: HR: Model with non-blnced grip cn be used with high grip when feed force is needed or with low grip for miniml rection force. HRX: models with blnced grip re perfectly blnced for stndrd pistol grip pplictions. HRF: Blnced grip with multiple ir inlets for fl exible connection. Air consumption Rec. Air Torque rnge Free CS t hose inlet soft joint speed Weight Length distnce free speed size thred Model Nm in lb r/min kg lb mm mm l/s cfm mm in Ordering No. With trigger nd push strt TWIST12 HRX / TWIST12 HRX / TWIST12 HRX / TWIST22 HRX / TWIST22 HRX / TWIST22 HRX / TWIST22 HR / TWIST22 HR / TWIST22 HR / TWIST22 HR / TWIST22 HR / LUF34 HR / LUF34 HR / LUF34 HR / Multiple ir inlet models nd ir-on-top models with trigger strt nd push strt TWIST12 HRF / TWIST HRF / TWIST HRF / Only ir-on-top models. All models: Are reversible. Are equipped with 1/4'' femle hexgon drive for bits. Hve quick chnge chuck. All dt t n ir pressure of 6.3 br. Pneumtic Assembly Tools Pneumtic Screwdrivers 17

RE reporting conversion kits re vilble for SR models, see ccessory pge. Soft stop options re vilble, designted with the suffi x -SS. Air consumption Rec.

10 Stright Models Shut off Stright screwdrivers should be used with torque rm for best ergonomics. LUM stright screwdrivers come in two different confi gurtions: PR: Model with push-to-strt function nd reverse button. SR: Model with lever strt function nd reverse ring. RE reporting conversion kits re vilble for SR models, see ccessory pge. Soft stop options re vilble, designted with the suffi x -SS. Air consumption Rec. Air Torque rnge Free CS t hose inlet soft joint speed Weight Length distnce free speed size thred Model Nm in lb r/min kg lb mm mm l/s cfm mm in Ordering No. With push strt nd button reverse LUM02 PR M LUM02 PR M LUM02 PR M LUM02 PR M LUM02 PR Q M LUM02 PR Q M LUM02 PR Q M LUM02 PR Q M LUM10 PR / LUM10 PR / LUM10 PR / LUM10 PR / LUM12 PR / LUM12 PR / LUM12 PR / LUM12 PR / LUM12 PR / LUM22 PR / LUM22 PR / LUM22 PR / LUM22 PR / LUM22 PR / LUM22 PR / LUM22 PR / LUM22 PR / LUM22 PR / LUM22 PR / LUM22 PR / LUM22 PR / Continued Pneumtic Screwdrivers Pneumtic Assembly Tools

11 Shut off Stright Models Air consumption Rec. Air Torque rnge Free CS t hose inlet soft joint speed Weight Length distnce free speed size thred Model Nm in lb r/min kg lb mm mm l/s cfm mm in Ordering No. With lever strt nd reverse ring LUM12 SR / LUM12 SR / LUM12 SR / LUM12 SR / LUM22 SR / LUM22 SR / LUM22 SR / LUM22 SR / LUM22 SR / LUM22 SR / LUM22 SR / All LUM02 hve n ir inlet thred M5. Nipple nd coupling re included ccessories. All LUM10/12/22 SR/PR: ESD pproved All dt t n ir pressure of 6.3 br. Slip clutch Stright Models Stright screwdrivers should be used with torque rm for best ergonomics The TWIST stright screwdrivers come in two different confi gurtions: PR: Model with push to strt function nd reverse button SR: Model with lever strt function nd reverse ring. Air consumption Rec. Air Torque rnge Free CS t hose inlet soft joint speed Weight Length distnce free speed size thred Model Nm in lb r/min kg lb mm mm l/s cfm mm in Ordering No. With lever strt nd reverse ring TWIST12 SR / TWIST22 SR / TWIST22 SR / With push strt nd reverse button TWIST22 PR / TWIST22 PR / TWIST22 PR / All dt t n ir pressure of 6.3 br. Pneumtic Assembly Tools Pneumtic Screwdrivers 19

Angle Models Shut off LTV ngle screwdriver models hve fst, ccurte shut-off clutch nd re designed for durbility. Slim design of the ngle hed llows good ccess in limited spces nd wkwrd positions.

12 Angle Models Shut off LTV ngle screwdriver models hve fst, ccurte shut-off clutch nd re designed for durbility. Slim design of the ngle hed llows good ccess in limited spces nd wkwrd positions. Spirl cut gers give high ccurcy. RE reporting conversion kits re vilble for LTV screwdriver models. For kit, see ccessory pge. Angle Air Angle hed consumption Rec. Air Torque rnge Free hed center t hose inlet soft joint speed Weight Length height to side free speed size thred Model Nm in lb r/min kg lb mm mm mm l/s cfm mm in Ordering No. 1/4'' femle hexgon drive for bits LTV009 R / LTV009 R / LTV009 R07-42-SH / LTV009 R / LTV009 R / LTV009 R / LTV19 R / /4'' squre drive for sockets LTV009 R / LTV009 R / LTV009 R07-6-SH / LTV009 R / LTV009 R / LTV009 R / LTV009 R B / LTV009 R / LTV009 R / LTV19 R / /8'' squre drive for sockets LTV009 R / LTV009 R / LTV009 R / LTV19 R / /4'' quick chnge chuck LTV009 R05-Q / LTV009 R07-Q / LTV009 R07-Q-SH / LTV009 R09-Q / LTV009 R11-Q / LTV009 R025-Q / LTV009 R035-Q / LTV19 R15-Q / Flush socket LTV009 R12-FS / All models: - Are reversible. - All dt t n ir pressure of 6.3 br. - Are ESD pproved 20 Pneumtic Screwdrivers Pneumtic Assembly Tools

Screwdrivers Accessories Accessories Included EXHAUST HOSE Included with stright nd ir-on-top models CLUTCH ADJUSTMENT KEY Included with ll shut-off nd slip clutch tools Clutch djustment key Optionl

LUM22 HR 3, 4, 6 4210 2052 00 4110 1355 92 8202 0501 10 8202 1180 77 4210 4337 04 LUM22 HR 10, 12 4210 2052 00 4110 1355 93 8202 0501 10 8202 1180 77 4210 4337 04 LUM22 HRX 3, 4, 6 4210 2052 00 4110

13 Screwdrivers Accessories Accessories Included EXHAUST HOSE Included with stright nd ir-on-top models CLUTCH ADJUSTMENT KEY Included with ll shut-off nd slip clutch tools Clutch djustment key Optionl Accessories Torque rms Instlltion ESD pproved Designtion Exhust hose Support hndle ESD hose dpters proposl pistol hndle LUM12 HRX/HRF LUM22 HR 3, 4, LUM22 HR 10, LUM22 HRX 3, 4, LUM12 SR LUM12 PR LUM22 SR LUM22 PR LTV LUM32 HR LUF Model Ordering No. Threded clutch houses LUM12 PR/SR 1, 2, 3, LUM12 HRX/HRF 1, 3, 5, LUM22 HRX/HR 2, 3, 4, LUM22 HRX/HR 10, LUM22 SR/PR 3, 4, 5, 6, LUM22 SR/PR 10, Angle hed covers LTV009 R025-R LTV009 R08-R Protective covers LUM22/32 HR LUM22 HRX LUM12 HRX Threded fronts LUM 32 HR10, Suspension yoke for LTV Quick chnge chuck kit, extr wide dimeter for esy hndling Angle-hed for LTV009 R03/08/09/11, 90 hex drive mgnetic bit holder Vcuum screw pick-up for LUM Substitute for XX ngle heds. Suspension yoke Quick chnge chuck kit Angle-hed for LTV009 RE-CONVERSION KITS Vcuum screw pick-up for LUM02 Model Ordering No. LUM12 HRF LUM12 SR LUM22 SR LTV Pneumtic Assembly Tools Pneumtic Screwdrivers 21

14 Accessories Screwdrivers Productivity Kits Model Mx ir flow Hose, 5 m Coupling Lubriction Ordering No. For smll screwdrivers with 1/8" BSP ir inlet MIDI Optimizer F/RD EQ08-C06-1/8 6 l/s Cblir 6 mm ErgoQIC 08 Yes MIDI Optimizer F/R EQ08-C06-1/8 6 l/s Cblir 6 mm ErgoQIC 08 No For screwdrivers with 1/4" BSP ir inlet MIDI Optimizer F/RD EQ08-C08 9 l/s Cblir 8 mm ErgoQIC 08 Yes MIDI Optimizer F/R EQ08-C08 9 l/s Cblir 8 mm ErgoQIC 08 No Service Kits The spre prts included in the service kits cover norml overhul of your tool. Alwys hve them vilble for fst nd economicl repir. Min prts included: Vne kit O rings Motor berings Circlips Gskets Pins etc. Model Ordering No. LUM10 PR LUM12 HRX, HRF LUM12 SR LUM12 PR LUM22 HR/HRX 3, 4, 6, LUM22 HR/HRX LUM22 PR/SR 3, 4, 6, LUM22 PR/SR LUM25 HRF LUM32 HR LUF34 HR TWIST HRF TWIST VR TWIST HR 3, 7, TWIST HR TWIST HR TWIST12 HRX 2, 3, TWIST22 HRX , 7, TWIST22 HRX LTV LTV Pneumtic Screwdrivers Pneumtic Assembly Tools

Introduction Impct Wrenches Power you cn depend on Atls Copco impct wrenches re designed to provide dependbility nd long, trouble-free service life in the toughest conditions.

15 Introduction Impct Wrenches Power you cn depend on Atls Copco impct wrenches re designed to provide dependbility nd long, trouble-free service life in the toughest conditions. Few other tools cn mtch the Atls Copco impct wrench when it comes to flexibility, cpcity-to-weight rtio nd simplicity in use nd mintennce. Atls Copco s powerful, high-speed impct wrenches re designed to cut production times by providing rpid run-down nd fst tightening. Impct wrenches build up torque in joints through series of rotry impcts, where ir pressure nd tightening time ffect the torque obtined. As generl rule, if wrench impcts longer thn 5 seconds on fstener, lrger wrench should be used in order to chieve better durbility. The LMS models re non shut-off, which mens they will shut off once the opertor releses the trigger. LMS The LMS is non shut-off impct wrench with extrordinry power to weight qulities nd virtully no rection force during tightening. The torque is pplied to the joint, not to your wrist. These tools re typiclly used where fst tightening or disssembly is needed nd the rnge covers recommended torque levels between Nm. LMS 8-SERIES The new LMS 8-series impct wrenches delivers true rw power nd enbles extremely fst tightening nd loosening. The innovtive nd unique Grese Retining System ensures mximum tool performnce with long service intervls. MINIMUM WEAR AND LOW VIBRATIONS Ech prt of the durble LMS8-Series impct mechnism is produ ced with very precise ccurcy. This llows the mximum mount of energy to be generted in ech impct. It lso minimizes wer, vibrtion nd strin on the opertor. Pneumtic Assembly Tools Impct Wrenches 23

16 Selection Guide M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M36 M42 M45 M48 Nm LMS LMS08 LMS18 LMS18 LMS28 LMS38 LMS38 LMS48 LMS58 LMS58 LMS61 LMS61 LMS68 LMS88 LMS88 LMS88 LMS LMS08 LMS18 LMS28 LMS38 LMS38 LMS48 LMS58 LMS58 LMS58 LMS68 LMS68 LMS68 LMS88 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M36 M42 M45 Nm LMS LMS08 LMS18 LMS28 LMS28 LMS38 LMS38 LMS48 LMS58 LMS61 LMS61 LMS68 LMS88 LMS88 LMS88 LMS88 LMS18 LMS18 LMS28 LMS38 LMS48 LMS48 LMS58 LMS68 LMS68 LMS68 LMS M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M36 M42 Nm LMS LMS08 LMS18 LMS28 LMS28 LMS38 LMS48 LMS58 LMS61 LMS61 LMS68 LMS88 LMS88 LMS88 LMS88 LMS18 LMS18 LMS28 LMS38 LMS48 LMS58 LMS68 LMS68 LMS68 LMS = HEAVY DUTY = EXTRA HEAVY DUTY The torque figures re norml tightening torque for untreted oil-smered nd rust-protected bolts nd nuts in the most common strength grdes. The torque figures correspond to pproximtely 63% of tensile stress. 24 Impct Wrenches Pneumtic Assembly Tools

Non Shut-off Pistol Grip Models LMS MODELS Recommended operting rnge 7-1800 Nm. Fst tightening nd disssembly. Negligible rection force. Low weight. High power-to-weight rtio.

LMS18 HR13 Length CS Air con- Rec. Air Bolt Squre Free excl.

17 Non Shut-off Pistol Grip Models LMS MODELS Recommended operting rnge Nm. Fst tightening nd disssembly. Negligible rection force. Low weight. High power-to-weight rtio. Tightening time should not exceed 5 seconds, to void excess wer on the tool. Soft-strt throttle. LMS58 HR25 Long service intervls. Durble high performnce with Grese Retining System. LMS18 HR13 Length CS Air con- Rec. Air Bolt Squre Free excl. dist- sumption hose inlet size drive Torque rnge Mx torque Impcts speed Weight nvil nce under lod size thred Model mm in Nm ft lb Nm ft lb per min r/min kg lb mm mm l/s cfm mm in Ordering No. LMS08 HR /8 c / LMS08 HR / / LMS18 HR /2 c / LMS18 HR /8 c / LMS18 HR13/F 10 1/2 e / LMS18 HR10/F 10 3/8 e / LMS28 HR /2 c / LMS28 HR13/F 12 1/2 e / LMS38 HR /2 c / LMS38 HR13/F /2 e / LMS48 HR /4 d / LMS58 HR d / LMS58 HR /4 d / LMS68 HR d / LMS68 HR S /8 b / Femle hex. quick chnge chuck. b Spline drive No. 5. c Pin retiner d Through hole e Friction ring Pneumtic Assembly Tools Impct Wrenches 25

Stright Models Non Shut-off LMS MODELS Recommended operting rnge 7-5500 Nm. Fst tightening nd disssembly. Negligible rection force. Low weight. LMS08 SR10 High power-to-weight rtio.

18 Stright Models Non Shut-off LMS MODELS Recommended operting rnge Nm. Fst tightening nd disssembly. Negligible rection force. Low weight. LMS08 SR10 High power-to-weight rtio. Soft-strt throttle. Tightening time should not exceed 5 seconds, to void excess wer on the tool. Long service intervls. LMS68 GIR25 Durble high performnce with grese retining system. LMS88 GIR38 Length CS Air con- Rec. Air Bolt Squre Free excl. dist- sumption hose inlet size drive Torque rnge Mx torque Impcts speed Weight nvil nce under lod size thred Model mm in Nm ft lb Nm ft lb per min r/min kg lb mm mm l/s cfm mm in Ordering No. LMS08 SR / / LMS08 SR /8 c / LMS68 GIR d / LMS68 GOR d / LMS68 GIR S /8 b / LMS68 GOR S /8 b / LMS88 GIR /2 d / LMS88 GOR /2 d / LMS88 GIR S /8 b / LMS88 GOR S /8 b / Femle hex. quick chnge chuck. b Spline drive No. 5. c Pin retiner d Through hole GOR = Outside trigger. GIR = Inside trigger. 26 Impct Wrenches Pneumtic Assembly Tools

19 Accessories Optionl Accessories MULTIFLEX SWIVEL Model Ordering No. LMS08 HR10/SR10, LMS18 HR10/ LMS18 HR10/13, LMS28/38 HR13, LMS48/58 HR20, LMS58 HR LMS68 HR25, LMS68/88 GIR, LMS68/88 GOR MultiFlex Swivel WHIP HOSE Model Ordering No. LMS08 HR10/SR10, LMS18 HR10/ LMS28/38 HR13, LMS48/58 HR20, LMS58 HR LMS68 HR25, LMS68/88 GIR, LMS68/88 GOR Whip hose SUSPENSION YOKE Model Ordering No. LMS68 GIR25/GOR25/GIRS5/GORS5/HRS5/HR LMS88 GIR38/GOR38/GIRS5/GORS Suspension yoke included LMS08-58 Productivity Kits Model Mx ir flow Hose, 5 m Coupling Lubriction Ordering No. For smll impcts nd pulse tools with 1/4" BSP ir inlet MIDI Optimizer F/RD EP EQ08-C08 9 l/s Cblir 8 mm ErgoQIC 08 Yes For 1/2" impct wrenches nd pulse tools with 3/8" BSP ir inlet MIDI Optimizer F/RD EQ08-C10 16 l/s Cblir 10 mm ErgoQIC 08 Yes For 1/2" impct wrenches nd pulse tools with 1/4" BSP ir inlet MIDI Optimizer F/RD EQ08-C10 16 l/s Cblir 10 mm ErgoQIC 08 Yes MIDI Optimizer F/RD EQ10-R10 16 l/s Rubber 10 mm ErgoQIC 10 Yes For impct wrenches nd pulse tools with 3/8" BSP ir inlet MIDI Optimizer F/RD EQ10-C13 23 l/s Cblir 13 mm ErgoQIC 10 Yes For impct wrenches nd pulse tools with 1/2" BSP ir inlet MIDI Optimizer F/RD EQ10-T13 35 l/s Turbo 13 mm ErgoQIC 10 Yes Service Kits The spre prts included in the service kits cover nor ml overhul of your tool. Alwys hve them vilble for fst nd economicl rep ir. Min prts included: Gskets O-rings Circlips Pins etc. Model Service kit LMS LMS LMS LMS LMS LMS LMS LMS Pneumtic Assembly Tools Impct Wrenches 27

Introduction ErgoPulse ErgoPulse impulse tools fst, relible nd opertor friendly The speed, relibility, nd ccurcy of ErgoPulse hydrulic impulse nutrunners, combined with the fct tht they re comfortble

Since there is no metl-to-metl impct in pulse tool, it provides softer, more controlled pulse with considerbly less vibrtion nd noise thn n impct wrench.

20 Introduction ErgoPulse ErgoPulse impulse tools fst, relible nd opertor friendly The speed, relibility, nd ccurcy of ErgoPulse hydrulic impulse nutrunners, combined with the fct tht they re comfortble to operte, mke them suitble for continuous hevy production. Since there is no metl-to-metl impct in pulse tool, it provides softer, more controlled pulse with considerbly less vibrtion nd noise thn n impct wrench. A COMPLETE RANGE ErgoPulse impulse tools re vilble in stright nd pistol grip, shut-off nd non shut-off versions. The rnge covers torque from Nm. The ErgoPulse principle The hert of pulse tool is the hydrulic pulse unit. Since the pulses re very short, there is lmost no rection force in the hndle, only the much lower motor torque is trnsferred to the opertor s hnd. In ddition, there re less vibrtions nd noise thn with n impct wrench. Combined with good blnce nd low weight the result is tool tht is very comfortble to operte. be tightened with excellent results without ny djustments. The PTS/PTX tools cn lso be used for reporting pplictions. ErgoPulse PTS-HRF These re Air-on-Top versions which offer full flexibility. You either use the ir inlet on top to void the disturbing hose hook or you use the conventionl ir inlet t the bottom of the hndle convenient tool for use in worksttions. ErgoPulse PTX The new ErgoPulse PTX series is intended for pplictions where weight is criticl. The tools re vilble in both Trim nd AutoTrim versions. PTS AND PTX SHUT-OFF PULSE TOOLS Atls Copco shut-off pulse tools shut off the ir supply when the pre-set torque is been reched. Opertor influence is minimized nd the result is incresed ccurcy nd fster tightening. Torque sensing system In ErgoPulse PTS nd PTX nutrunners torque is sensed by mens of rottble inertil mss cting ginst n djustble spring. The result is highly ccurte nd esily djustble shut-off system. Pulse mechnism The pulse mechnism hs pistons for minimum weight nd long service life. The design is bsed on cm-guided pistons nd rollers nd the pulse cylinder is oil-filled. The moving prts re thus completely immersed in oil, which ensures long service life. Twin chmber vne motor This is designed to give high torque t low speed, which gives the best chrcteristics for fst, ccurte tightening. TRIM vlve A ptented djustble vlve t the ir outlet is used to mximize tool ccurcy on one type of joint, which could be hrd, medium or soft. AUTOTRIM vlve PTS/PTX-AT tools re equipped with n utomtic twostge trim vlve. The tool runs down the screw with reduced free speed. After 1-2 pulses it shifts utomticlly to full power thus enbling both hrd nd soft joints to ERGOPULSE 25PTX At the top of the PTX rnge, is the new ErgoPulse 25PTX, which gives you 900 Nm of tightening torque in tool weighing only 10.3 kg. ERGOPULSE XS NON SHUT-OFF TOOLS ErgoPulse XS is the correct choice when the opertor needs to control the process. The tools provide high torque, fst, ccurte tightening nd long service lifetimes. Twin chmber vne motor This is designed to give high torque t low speed, which provides the best chrcteristics for fst, relible nd ccurte tightening. Double or triple blded pulse mechnisms The tools re equipped with pulse units with two or three bldes. They employ the Atls Copco ptented cm-guided design to push out the bldes, giving very high relibility. The pulse units hve high power-to-weight rtio, mking the tools very powerful for their size. Torque is djusted by regulting n rtificil lek in the hydrulic circuit. ERGOPULSE 6PS This model is good choice for tightening self-tpping screws nd when fst, powerful reversing is needed. Torque is djusted by regulting the ir pressure. 28 Hydrulic Impulse Nutrunners Pneumtic Assembly Tools

21 Selection Guide EP PTS/PTX SHUT-OFF MODELS The ErgoPulse PTS nd PTX tools cn be djusted within wide torque rnge by simply setting the spring force tht countercts the inerti body. Torque should preferbly be checked with hnd torque wrench. Electronic monitoring with n in-line trnsducer is possible but should be verified with mnul hnd torque wrench to void mesuring errors due to the extremely short pulse sequence. Torque Nm M STRAIGHT MODELS PISTOL GRIP MODELS M24 M20 M16 M14 M12 M10 M8 M6 M5 5 2* Screw size 19 9* 31 13* 6* 4* 3/8" squre drive 45 22* 5 2* 9 4* 14 8* * 10* 8* * /8" squre drive 1/2" squre drive /4" squre drive " squre drive 3PTX 5PTX 7PTX 3PTX 5PTS 4PTX 6PTX 8PTX 4PTX 5PTX * For tools with quick chnge chuck, see technicl dt. 6PTS 7PTS 8PTS 6PTX 7PTX 8PTX 9PTX 11PTX 13PTX 15PTX 19PTX 10PTS 12PTS 14PTS 18PTS 25PTX EP XS/PS NON SHUT-OFF MODELS The size of tool is determined on the bsis of torque nd/or bolt dimension. Torque should preferbly be checked with hnd torque wrench. Electronic monitoring with n in-line trnsducer is possible but should be verified with mnul hnd torque wrench to void mesuring errors due to the extremely short pulse sequence. Torque Nm 400 STRAIGHT MODELS PISTOL GRIP MODELS M M M Screw size M M10 M8 M * 31 20* 30* * 10* 30* 50 M5 M4 5 3/8" squre drive 1/4" quick chnge chuck 3/8" squre drive 1/2" squre drive 3/4" squre drive 6XS 7XS 8XS 5XS 6PS 6XS 7XS 8XS 10XS 12XS 14XS 16XS 20XS * For tools with quick chnge chuck, see technicl dt. Pneumtic Assembly Tools Hydrulic Impulse Nutrunners 29

Pistol Grip Models Shut-off EP PTX MODELS In ErgoPulse shut-off tools the ir supply is shut off s soon s the pre-set torque hs been reched, minimizing opertor infl uence.

High power-to-weight rtio. No springs to wer out. No wer on key prts. High precision components. No rection forces. Light, well-blnced tools. Low noise levels. Lubriction free. Air con- Rec.

22 Pistol Grip Models Shut-off EP PTX MODELS In ErgoPulse shut-off tools the ir supply is shut off s soon s the pre-set torque hs been reched, minimizing opertor infl uence. The result is incresed ccurcy nd fster tightening. High relibility. Consistent torque over time, low menshift. High level of durbility. High speed, short cycle times. One-hnded opertion. High power-to-weight rtio. No springs to wer out. No wer on key prts. High precision components. No rection forces. Light, well-blnced tools. Low noise levels. Lubriction free. Air con- Rec. Air Bolt Squre Free CS sumption hose inlet size drive Torque rnge speed Weight Length distnce under lod size thred Model mm in Nm ft lb r/min kg lb mm mm l/s cfm mm in Ordering No. TRIM-RE EP3PTX5 HR42-RE M4-M5 1/4 b c / EP4PTX9 HR10-RE M5 3/ c / EP4PTX9 HR42-RE M5 1/4 b c / EP5PTX17 HR42-RE M6 1/4 b c / EP5PTX19 HR10-RE M6 3/ c / EP6PTX28 HR42-RE M6-M8 1/4 b c / EP6PTX32 HR10-RE M6-M8 3/ c / EP7PTX55 HR10-RE M8-M10 3/ c / EP8PTX70 HR10-RE M10 3/ c / EP9PTX80 HR13-RE M10 1/ c / EP11PTX110 HR13-RE M12 1/ c / EP13PTX150 HR13-RE M12-M14 1/ c / EP15PTX250 HR20-RE M12-M16 3/ c / EP19PTX450 HR20-RE M16-M20 3/ c / Trim-RE Low pressure models EP5PTX HR10-RE-L M5 3/ d / EP5PTX HR42-RE-L M4-M5 1/4 b d / EP6PTX HR10-RE-L M6 3/ d / EP6PTX HR42-RE-L M5 1/4 b d / EP7PTX HR10-RE-L M6 3/ d / EP8PTX HR10-RE-L M6-M8 3/ d / AutoTrim EP3PTX5 HR42-AT M4-M5 1/4 b c / EP4PTX9 HR10-AT M5 3/ c / EP4PTX9 HR42-AT M5 1/4 b c / EP5PTX17 HR42-AT M6 1/4 b c / EP5PTX19 HR10-AT M6 3/ c / EP6PTX28 HR42-AT M6-M8 1/4 b c / EP6PTX32 HR10-AT M6-M8 3/ c / EP7PTX55 HR10-AT M8-M10 3/ c / EP8PTX70 HR10-AT M10 3/ c / EP9PTX80 HR13-AT M10 1/ c / EP11PTX110 HR13-AT M12 1/ c / EP13PTX150 HR13-AT M12-M14 1/ c / EP15PTX250 HR20-AT M12-M16 3/ c / EP19PTX450 HR20-AT M16-M20 3/ c / AutoTrim Low pressure models EP5PTX HR10-AT-L M5 3/ d / EP5PTX HR42-AT-L M4-M5 1/4 b d / EP6PTX HR10-AT-L M6 3/ d / EP6PTX HR42-AT-L M5 1/4 b d / EP7PTX HR10-AT-L M6 3/ d / EP8PTX HR10-AT-L M6-M8 3/ d / To be used s guide only, fi nl torque depends on type of joint, ccessories used nd ir pressure. b Femle hexgon drive. Quick chnge chuck. c In full speed mode. 30 Hydrulic Impulse Nutrunners Pneumtic Assembly Tools d Mesured t 5 br ir pressure.

Shut-off Pistol Grip Models EP PTS MODELS ErgoPulse PTS is the relible nd powerful workhorse nd offers the sme shut-off mechnism s the pek performer PTX.

All PTS models cn lso be used s lubriction free, just like other ErgoPulse tools. Air con- Rec.

23 Shut-off Pistol Grip Models EP PTS MODELS ErgoPulse PTS is the relible nd powerful workhorse nd offers the sme shut-off mechnism s the pek performer PTX. The PTS series hs some ir on top HRF models, mking it possible to feed the ir from bove to the tool to mke it esier to use in mny pplictions. All PTS models cn lso be used s lubriction free, just like other ErgoPulse tools. Air con- Rec. Air Bolt Squre Free CS sumption hose inlet size drive Torque rnge speed Weight Length distnce under lod size thred Model mm in Nm ft lb r/min kg lb mm mm l/s cfm mm in Ordering No. TRIM-RE EP5PTS12 HR42-RE M5-M6 1/4 b c / EP5PTS14 HR10-RE M5-M6 3/ c / EP6PTS22 HR10-RE M6 3/ c / EP6PTS20 HR42-RE M6 1/4 b c / TRIM-RE with blnced grip EP7PTS30 HR42-RE M8 1/4 b c / EP7PTS35 HR10-RE M8 3/ c / EP8PTS40 HR42-RE M8 1/4 b c / EP8PTS55 HR10-RE M8-M10 3/ c / EP10PTS90 HR13-RE M10-M12 1/ c / EP12PTS150 HR13-RE M12-M14 1/ c / EP14PTS250 HR20-RE M12-M16 3/ c / EP18PTS410 HR20-RE M16-M20 3/ c / TRIM-RE with Air on top EP7PTS35 HRF10-RE M8 3/ c / EP8PTS55 HRF10-RE M8-M10 3/ c / EP10PTS90 HRF13-RE M10-M12 1/ c / AutoTrim EP6PTS20 HR42-AT M6 1/4 b d / EP6PTS22 HR10-AT M6 3/ d / AutoTrim with blnced grip EP7PTS30 HR42-AT M8 1/4 b d / EP7PTS35 HR10-AT M8 3/ d / EP8PTS40 HR42-AT M8 1/4 b d / EP8PTS55 HR10-AT M8-10 3/ d / EP10PTS90 HR13-AT M / d / EP12PTS150 HR13-AT M / d / EP14PTS250 HR20-AT M / d / EP18PTS410 HR20-AT M / d / To be used s guide only, fi nl torque depends on type of joint, ccessories used nd ir pressure. b Femle hexgon drive. Quick chnge chuck. c With TRIM vlve fully open. d In full speed mode. Pneumtic Assembly Tools Hydrulic Impulse Nutrunners 31

One-hnded opertion. High power-to-weight rtio. No springs to wer out. High precision components. No rection forces. Light, well-blnced tools. Low noise levels. Lubriction free. Air con- Rec.

24 Pistol Grip Models Non Shut-off EP XS MODELS In ErgoPulse non shut-off tools the tool produces pulses until the opertor releses the trigger. Preferred in pplictions where it is n dvntge for the opertor to be ble to control the process by shutting off the tool mnully. High relibility nd durbility. High speed, short cycle times. One-hnded opertion. High power-to-weight rtio. No springs to wer out. High precision components. No rection forces. Light, well-blnced tools. Low noise levels. Lubriction free. Air con- Rec. Air Bolt Squre Free CS sumption hose inlet size drive Torque rnge speed Weight Length distnce under lod size thred Model mm in Nm ft lb r/min kg lb mm mm l/s cfm mm in Ordering No. EP6PS HR10 M8 3/8 c -30 c / EP6PS HR42 M8 1/4 b c -28 c / EP8PS HR10 M8-M10 3/8 c -65 c / EP5XS HR42 M5-M6 1/4 b / EP6XS HR42 M6 1/4 b / EP6XS HR10 M6 3/ / EP7XS HR42 M8 1/4 b / EP7XS HR10 M8 3/ / EP8XS HRX42 M8 1/4 b / EP8XS HRX10 M8-M10 3/ / EP10XS HR13 M10 1/ / EP12XS HR13 M12 1/ / EP14XS HR13 M14 1/ / EP16XS HR20 M16 3/ / EP20XS HR20 M20 3/ / To be used s guide only, fi nl torque depends on type of joint, ccessories used nd ir pressure. b Femle hexgon drive. Quick chnge chuck. c Torque is djusted by regulting the ir pressure. 32 Hydrulic Impulse Nutrunners Pneumtic Assembly Tools

Shut-off Stright Models EP PTX MODELS In ErgoPulse shut-off tools the ir supply is shut off s soon s the pre-set torque hs been reched, minimizing opertor infl uence.

High power-to-weight rtio. No springs to wer out. High precision components. No rection forces. Low noise levels. Lubriction free. Air con- Rec.

25 Shut-off Stright Models EP PTX MODELS In ErgoPulse shut-off tools the ir supply is shut off s soon s the pre-set torque hs been reched, minimizing opertor infl uence. The result is incresed ccurcy nd fster tightening. High relibility. Consistent torque over time, low menshift. High level of durbility. High speed, short cycle times. One-hnded opertion. High power-to-weight rtio. No springs to wer out. High precision components. No rection forces. Low noise levels. Lubriction free. Air con- Rec. Air Bolt Squre Free CS sumption hose inlet size drive Torque rnge speed Weight Length distnce under lod size thred Model mm in Nm ft lb r/min kg lb mm mm l/s cfm mm in Ordering No. TRIM EP3PTX5 SR42 M4-M5 1/4 b d / EP4PTX9 SR10 M5 3/ d / EP4PTX9 SR42 M5 1/4 b d / EP5PTX14 SR42 M6 1/4 b d / EP5PTX15 SR10 M6 3/ d / EP6PTX18 SR42 M6 1/4 b d / EP6PTX19 SR10 M6 3/ d / EP7PTX28 SR42 M6-M8 1/4 b d / EP7PTX31 SR10 M6-M8 3/ d / EP8PTX45 SR10 M8 3/ d / EP8PTX38 SR42 M8 1/4 b d / TRIM-RE EP25PTX900 GR25-RE M24-M d / AutoTrim EP3PTX5 SR42-AT M4-M5 1/4 b c / EP4PTX9 SR10-AT M5 3/ c / EP4PTX9 SR42-AT M5 1/4 b c / EP5PTX15 SR10-AT M6 3/ c / EP5PTX14 SR42-AT M6 1/4 b c / EP6PTX18 SR42-AT M6 1/4 b c / EP6PTX19 SR10-AT M6 3/ c / EP7PTX28 SR42-AT M6-M8 1/4 b c / EP7PTX31 SR10-AT M6-M8 3/ c / EP8PTX38 SR42-AT M8 1/4 b c / EP8PTX45 SR10-AT M8 3/ c / AutoTrim Low pressure models EP5PTX SR10-AT-L M5 3/ e / EP5PTX SR42-AT-L M4-M5 1/4 b e / EP6PTX SR10-AT-L M6 3/ e / EP6PTX SR42-AT-L M5 1/4 b e / EP7PTX SR10-AT-L M6 3/ e / EP7PTX SR42-AT-L M6 1/4 b e / EP8PTX SR10-AT-L M6-M8 3/ e / To be used s guide only, fi nl torque depends on type of joint, ccessories used nd ir pressure. b Femle hexgon drive. Quick chnge chuck. d With TRIM vlve fully open. e Mesured t 5 br ir pressure. c In full speed mode. Pneumtic Assembly Tools Hydrulic Impulse Nutrunners 33

26 Stright Models Non Shut-off XS MODELS In ErgoPulse non shut-off tools the tool produces pulses until the opertor releses the trigger. Preferred in pplictions where it is n dvntge for the opertor to be ble to control the process by shutting off the tool mnully. High relibility nd durbility. High speed, short cycle times. One-hnded opertion. High power-to-weight rtio. No springs to wer out. No wer on key prts. High precision components. No rection forces. Light, well-blnced tools. Low noise levels. Lubriction free. Air con- Rec. Air Bolt Squre Free CS sumption hose inlet size drive Torque rnge speed Weight Length distnce under lod size thred Model mm in Nm ft lb r/min kg lb mm mm l/s cfm mm in Ordering No. EP6XS SR10 M6 3/ / EP6XS SR42 M6 1/4 b / EP7XS SR10 M8 3/ / EP7XS SR42 M8 1/4 b / EP8XS SR10 M8-M10 3/ / EP8XS SR42 M8 1/4 b / To be used s guide only, finl torque depends on type of joint, ccessories used nd ir pressure. b Femle hexgon drive. Quick chnge chuck. Productivity Kits Model Mx ir flow Hose, 5 m Coupling Lubriction Ordering No. For smll impcts nd pulse tools with 1/4" BSP ir inlet MIDI Optimizer F/RD EP EQ08-C08 9 l/s Cblir 8 mm ErgoQIC 08 Yes For 1/2" impct wrenches nd pulse tools with 3/8" BSP ir inlet MIDI Optimizer F/RD EQ08-C10 16 l/s Cblir 10 mm ErgoQIC 08 Yes For 1/2" impct wrenches nd pulse tools with 1/4" BSP ir inlet MIDI Optimizer F/RD EQ08-C10 16 l/s Cblir 10 mm ErgoQIC 08 Yes MIDI Optimizer F/RD EQ10-R10 16 l/s Rubber 10 mm ErgoQIC 10 Yes For impct wrenches nd pulse tools with 3/8" BSP ir inlet MIDI Optimizer F/RD EQ10-C13 23 l/s Cblir 13 mm ErgoQIC 10 Yes For impct wrenches nd pulse tools with 1/2" BSP ir inlet MIDI Optimizer F/RD EQ10-T13 35 l/s Turbo 13 mm ErgoQIC 10 Yes Hydrulic Impulse Nutrunners Pneumtic Assembly Tools

ErgoPulse Accessories Optionl Accessories GUIDED EXTENSIONS Di. of Squre outgoing drive spindle Length Avilble for in mm mm Mrking Ordering No.

27 ErgoPulse Accessories Optionl Accessories GUIDED EXTENSIONS Di. of Squre outgoing drive spindle Length Avilble for in mm mm Mrking Ordering No. 6-8XS, 3/ PT/PTS/PTX 3/ / / / / C, 10-12XS 1/ / / / / / XS, 9-13PTX, 1/ PT/PTS 1/ / / / / XS/20XS, 3/ PTS/18PTS, 3/ PTX/19PTX 3/ / / Guided extensions GUIDED SOCKETS Width Dimeter Squre cross of outgoing Avilble for in mm/in mm Mrking Ordering No. Metric sockets 6-8XS, 3/ PT/PTS/PTX 3/ / / / / XS, 9-13PTX, 1/ PT/PTS 1/ / / / / XS/20XS, 3/ PTS/18PTS, 3/ PTX/19PTX 3/ UNC/UNF-sockets 6-8XS, 3/8 1/2 13 1/ PT/PTS/PTX 3/8 9/ / /8 3/4 13 3/ XS, 9-13PTX, 1/2 1/2 18 1/ PT/PTS 1/2 9/ / /2 3/4 18 3/ /2 15/ / XS/20XS, 3/4 3/4 25 3/ PTS/18PTS, 3/4 15/ / PTX/19PTX 3/4 11/ / Guided sockets Pneumtic Assembly Tools Hydrulic Impulse Nutrunners 35

Accessories ErgoPulse Optionl Accessories GUIDED QUICK CHANGE CHUCK FOR POWER TOOLS Dimeter Squre Femle of outgoing drive hex spindle Avilble for in in mm Mrking Ordering No.

EP8XS HRX 4250 1895 00 EP10XS HR 4250 1784 00 EP12XS HR 4250 2459 00 EP14XS HR 4250 2160 00 EP16XS HR 4250 2282 00 4250 2396 91 EP20XS HR 4250 2288 00 Included EP4/5/6PTX HR 4250 2465 00 EP7/8PTX HR

28 Accessories ErgoPulse Optionl Accessories GUIDED QUICK CHANGE CHUCK FOR POWER TOOLS Dimeter Squre Femle of outgoing drive hex spindle Avilble for in in mm Mrking Ordering No. 6-8XS, 3/8 1/4 13 3/8-1/ PT/PTS/PTX 3/8 7/ /8-7/ XS, 9-13PTX, 1/2 7/ /2-7/ PT/PTS Guided quick chnge chuck RE-REPORTING KIT Ordering No. RE-reporting kit for ErgoPulse PTS/PTX models with AutoTrim or Trim-RE vlve PROTECTIVE COVER AND SUPPORT HANDLE Protective Support Pistol grip models cover hndle EP6/7XS HR EP8XS HRX EP10XS HR EP12XS HR EP14XS HR EP16XS HR EP20XS HR Included EP4/5/6PTX HR EP7/8PTX HR EP9PTX HR EP11PTX HR EP13PTX HR EP15PTX HR EP19PTX HR EP5/6PT/PTS HR EP7/8PT/PTS HR EP10PT/PTS HR EP12PT/PTS HR EP14PTS HR EP18PTS HR For complete informtion, see spre prts list. Support hndle Protective cover Service Kits The spre prts included in the service kits cover norml overhul of your tool. Alwys hve them vilble for fst nd economicl repir. Min prts included: Vne kit O rings Motor berings Circlips Gskets Pins etc. Model Pulse unit kit Service kit EP5XS EP6/7XS HR EP6/7XS SR EP6PS HR EP8PS HR EP8XS HR EP8XS SR EP10XS HR EP12XS HR EP14XS HR EP16XS HR EP20XS HR EP4PTX HR EP5/6PTX HR Oil filling kit (50 ml oil, syringe) Oil filling kit (1000 ml, syringe) Model Pulse unit kit Service kit EP7PTX HR EP8PTX HR EP9PTX HR EP11PTX HR EP13PTX HR EP15PTX HR EP19PTX HR EP25PTX GR EP5/6PTS HR EP7/8PTS HR EP10PTS HR EP12PTS HR EP14PTS HR EP18PTS HR For complete informtion, see spre prts list. 36 Hydrulic Impulse Nutrunners Pneumtic Assembly Tools

Introduction Controlled Impulse Nutrunner An impulse tool with fstening system intelligence Atls Copco s Pulsor C System gives you ll the dvntges of controlled impulse tool, plus the intelligence of

The controller remembers up to 4,000 tightenings tht cn be stored nd nlyzed. This enbles you to fine-tune your process nd ensure tht every tightening in every shift is perfect.

29 Introduction Controlled Impulse Nutrunner An impulse tool with fstening system intelligence Atls Copco s Pulsor C System gives you ll the dvntges of controlled impulse tool, plus the intelligence of n electric fstening system. Like ll Atls Copco impulse tools, Pulsor C is fst, powerful, light nd compct nd genertes virtully no rection force. The controller remembers up to 4,000 tightenings tht cn be stored nd nlyzed. This enbles you to fine-tune your process nd ensure tht every tightening in every shift is perfect. If they re not perfect, you cn see why. The Pulsor C, with its control system, is designed for qulity criticl pplictions. Pulsor C lerts you to mistkes s soon s they re mde. Lights on the bck of the tool indicte if screws re correctly tightened. They inform the user bout torque, erly shut-off or if prts hve been forgotten. Pulsor C will control repetbility nd cn report results. THE SYSTEM The Pulsor C system comprises the tool, cble, controller nd tool control box where the shut-off vlve is locted. THE TOOL Pulsor C tools re n ergonomic, highperformnce rnge of impulse nutrunners with signl lights to provide direct opertor feedbck. No mechnicl torque setting in tool. Pulsor monitors nd records: Torque result Angle result Premture shut-off Number of pulses Tightening time Rundown time Brcode number SOFTWARE The PC bsed ToolsTlk Pulsor C softwre is used for mking ll system settings. Tool settings Communiction settings to fctory networks CABLES The strong, resistnt electric tool cble is vilble in three versions: stright, coil nd spirl. TOOL CONTROL BOX Pressure djustment nd tool shut-off vlves re locted in this box. CONTROLLER The controller remembers up to 4,000 tightenings everything from torque results nd rundown time to identifiction number (see below for full list of prmeters). The results cn esily be sent to network nd stored on server. They cn lso be trnsferred directly to PC nd then nlyzed in progrm such s Excel. This mens tht you cn esily fine-tune your process. Pneumtic Assembly Tools Controlled Impulse Nutrunners 37

Pistol Grip Models Pulsor C The Pulsor C tool is fst nd powerful. It is lso light, compct nd genertes virtully no rection force, mking it very comfortble tool to work with. Fst rundown.

30 Pistol Grip Models Pulsor C The Pulsor C tool is fst nd powerful. It is lso light, compct nd genertes virtully no rection force, mking it very comfortble tool to work with. Fst rundown. Up to 9000 rpm for highest productivity. No need for rection rm. Virtully no rection force due to pulse tightening. Avoid downtime. Get n erly wrning with Tool drift lrm. Esy to service. Ptented pulse technology with few prts. Pln service with service lrms. Illumintion of working re with bright LED. Opertor feedbck fter tightening with LED lights (OK/NOK). Air con- Rec. Air Bolt Squre Free CS sumption hose inlet size drive Torque rnge speed Weight Length distnce under lod size thred Model mm in Nm ft lb r/min kg lb mm mm l/s cfm mm in Ordering No. Tools with bll retiner EPP6 C40 HR-B10 M6-M8 3/ / EPP8 C55 HR-B10 M8-M10 3/ / EPP10 C90 HR-B13 M10 1/ / EPP11 C110 HR-B13 M12 1/ / Tools with pin retiner EPP6 C40 HR10 M6-M8 3/ / EPP8 C55 HR10 M8-M10 3/ / EPP10 C90 HR13 M10 1/ / EPP11 C110 HR13 M12 1/ / EPP13 C150 HR13 M12-M14 1/ / Tools with through hole in squre drive EPP15 C250 HR20 M12-M16 3/ / EPP19 C400 HR20 M16-M20 3/ / CONTROLLER SOFTWARE Pulsor s functionlity is unlocked with the RBU (Rpid Bckup Unit) key. This ptented device gives you ccess to the functionlity you need while providing bckup for the dt you hve progrmmed yourself. Function RBU Gold Number of results in the result dtbse 4000 Tool Setup Yes Tool Lock Box Yes Network/TCP/IP Yes I/O-bus (CAM-cbel) Yes Click wrench Yes ToolsNet Yes Number of Psets up to 100 Number of jobs up to 100 Sttistics Yes Number of events 500 Brcode reder Yes Tool drift lrm Yes 38 Controlled Impulse Nutrunners Pneumtic Assembly Tools

Pulsor C Accessories Optionl Accessories TOOL ACCESSORIES Model Ordering No.

8433 6942 20 Pulsor Focus 4000-C-PN-HW 8433 6948 20 Pulsor Focus 4000-C-EIP-HW 8433 6949 20 Pulsor Focus

05 12 m 4250 2533 12 Spirl 5 m 4250 2533 06 12 m 4250 2533 13 Coil 3 m 4250 2533 53 5 m 4250 2533 55 7 m 4250 2533

8092 1292 10 Plnt license 8092 1292 99 Suspension yoke (for upside down hnging, ll models) 4250 2720 00 Pulsor Focus

Rotry selector 8433 0606 15 I/O Expnder 8433 0564 39 RE-Alrm 8433 0560 03 Selector 4 8433 0610 04 Selector 8 8433

Rotting red 8433 0570 30 Rotting yellow 8433 0570 35 Siren 8433 0570 40 Compct 8433 0570 16 DSL-03 with push button

31 Pulsor C Accessories Optionl Accessories TOOL ACCESSORIES Model Ordering No. Controllers Pulsor Focus 4000-C-HW Pulsor Focus 4000-C-DN-HW Pulsor Focus 4000-C-PB-HW Pulsor Focus 4000-C-PN-HW Pulsor Focus 4000-C-EIP-HW Pulsor Focus 4000-C-IB-HW Tool Control Box TCB-1E RBU Pulsor C - Gold TCB cbles Cble PF - TCB, 1.2 m Cble PF - TCB, 5 m Cble PF - TCB, 10 m Tool cbles Stright 5 m m Spirl 5 m m Coil 3 m m m Bck plte (for ttching PF nd TCB in one plte) PCU - Pulsor Control Unit (Includes: controller, RBU, TCB, bck plte, cble 1.2 m) PCU ToolsTlk Pulsor C, W10 1-user license user license user license Plnt license Suspension yoke (for upside down hnging, ll models) Pulsor Focus Coil cble Spirl cble Tool Control Box (TCB) Stright cble Selector 4 CONTROLLER ACCESSORIES Model Ordering No. Rotry selector I/O Expnder RE-Alrm Selector Selector Opertor pnel bsic Opertor pnel dvnced Stcklights ESL-04 Stndrd Rotting red Rotting yellow Siren Compct DSL-03 with push button with blnking plugs Stcklight DSL-03 Opertor pnel Bsic TOOL HOSE KITS Model Hose kit Ordering No. Hoses 5 m EPP6 EPP10 Cblir 10 + Ergo couplings EPP11 EPP19 Cblir 13 + Ergo couplings Hoses 10 m EPP6 EPP10 Cblir 10 + Ergo couplings EPP11 EPP19 Cblir 13 + Ergo couplings Pneumtic Assembly Tools Controlled Impulse Nutrunners 39

Introduction Pneumtic Nutrunners User-friendly tools offering power, speed nd ccurcy The tools in Atls Copco s brod rnge of pneumtic nutrunners offer superior combintion of power, speed nd ccurcy.

32 Introduction Pneumtic Nutrunners User-friendly tools offering power, speed nd ccurcy The tools in Atls Copco s brod rnge of pneumtic nutrunners offer superior combintion of power, speed nd ccurcy. With their dvnced ergonomic designs, they re lso extremely user-friendly nd will contribute to rising productivity in wide rnge of pplictions in your ssembly plnt. Tools in Atls Copco s rnge of pneumtic nutrunners re divided into three min ctegories: Angle, stright nd pistol grip versions. These re lso vilble in optionl models, such s crowfoot, holdnd-drive, nd flush socket. THE POWER TO RAISE PRODUCTIVITY The high power output provided by Atls Copco nutrunners is decisive for productivity, i.e., the combined performnce of opertor nd tool. The tools re set t the optiml speed for every torque cpcity rting. The blnce between speed nd clutch response gives high ccurcy, ensuring torque repetbility, regrdless of joint chrcteristics. COMFORTABLE TO WORK WITH Our pneumtic nutrunners live up to Atls Copco s reputtion for developing tools with good ergonomics. Low tool weights, thermlly insulted grips nd low noise nd vibrtion levels ll help to reduce opertor ftigue nd rise individul productivity in your plnt. Simplicity in selection nd instlltion llow you to set the torque once nd tht is the torque you will get, joint fter joint, without complicted nlyses. CHOOSING THE RIGHT TOOL IS EASY No joint is too complicted for nutrunner. To set the torque, just djust it to the required level, regrdless of joint conditions. 40 Pneumtic Nutrunners Pneumtic Assembly Tools

Introduction Angle Nutrunners A new ngle on productivity The LTV 9-2 nd LTV 8 ngle nutrunner rnge from Atls Copco successfully combines two key performnce fctors speed nd ccurcy.

33 Introduction Angle Nutrunners A new ngle on productivity The LTV 9-2 nd LTV 8 ngle nutrunner rnge from Atls Copco successfully combines two key performnce fctors speed nd ccurcy. Consistently ccurte, high-speed tightening is complemented by dvnced ergonomic design, ensuring n unmtched level of productivity. All this is presented in tool tht is very esy to hndle. Angle nutrunners from Atls Copco re certified for ccurcy nd durbility by mjor cr mnufcturers. They re esy to choose, esy to set, nd esy to operte. ACCURATE EVERY TIME Hrd or soft joint? You don t need to think bout it. The tool gives the torque you instll, independent of joint vritions nd vritions in ir pressure nd lubriction. The clutch shuts off t the sme torque, tightening fter tightening. HIGHEST PRODUCTIVITY Instnt disenggement of the clutch keeps torque over-shoot to minimum even on the fstest tools. Our new models were developed to meet the most extreme requirements on opertionl speeds. As lwys, we kept opertor comfort in mind. The tools re well blnced, slim nd comfortble to hndle. Rection forces re extremely low. JOB VERIFICATION For remote indiction of clutch relese function the tools cn be equipped with ir signl outlet RE. This is often used for counting the number of fsteners in tightening cycle. Pneumtic Assembly Tools Pneumtic Nutrunners 41

Angle Nutrunners Shut-off LTV29-2 SERIES Designed for high speed nd smll dimensions. Slim lightweight design. Soft, comfortble grip. Esy to reverse. Low rection force.

High torque ccurcy. Integrted sockets give reduced ngle hed height. Angle Angle hed Air con- Rec.

34 Angle Nutrunners Shut-off LTV29-2 SERIES Designed for high speed nd smll dimensions. Slim lightweight design. Soft, comfortble grip. Esy to reverse. Low rection force. LTV39-2 SERIES The fstest nutrunners of this type. Powerful motor. Consistently high ccurcy. Mny opertor-friendly fetures. LTV FS FLUSH SOCKET TOOLS Minimum ngle hed size gives good ccess. High torque ccurcy. Integrted sockets give reduced ngle hed height. Angle Angle hed Air con- Rec. Air Bolt Squre Torque rnge Free hed center sumption t hose inlet size drive soft joint speed Weight Length height to side free speed size thred Model mm in Nm ft lb r/min kg lb mm mm mm l/s cfm mm in Ordering No. Reversible LTV29-2 R12-6 M6 1/ / LTV29-2 R12-10 M6 3/ / LTV29-2 R12-Q M6 1/ / LTV29-2 R12-42 M6 1/4 b / LTV29-2 R12-B6 M6 1/ / LTV29-2 R12-B10 M6 3/ / LTV29-2 R16-6 M6 1/ / LTV29-2 R16-10 M6 3/ / LTV29-2 R16-Q M6 1/ / LTV29-2 R16-42 M6 1/4 b / LTV29-2 R16-B6 M6 1/ / LTV29-2 R16-B10 M6 3/ / LTV29-2 R24-10 M8 3/ / LTV29-2 R24-B10 M8 3/ / LTV29-2 R30-10 M8 3/ / LTV29-2 R30-B10 M8 3/ / LTV39-2 R16-10 M6 3/ / LTV39-2 R16-B10 M6 3/ / LTV39-2 R24-B10 M8 3/ / LTV39-2 R30-10 M8 3/ / LTV39-2 R30-B10 M8 3/ / LTV39-2 R37-10 M8 3/ / LTV39-2 R37-B10 M8 3/ / LTV39-2 R48-10 M8 3/ / LTV39-2 R48-13 M8 1/ / LTV39-2 R48-B10 M8 3/ / LTV39-2 R48-B13 M8 1/ / LTV39-2 R56-10 M10 3/ / LTV39-2 R56-13 M10 1/ / LTV39-2 R56-B10 M10 3/ / LTV39-2 R56-B13 M10 1/ / LTV39-2 R70-13 M10 1/ / LTV39-2 R70-B13 M10 1/ / LTV39-2 R85-13 M / / LTV39-2 R85-B13 M / / LTV39-2 R M12 1/ / Flush socket LTV29-2 R24 FS M / LTV29-2 R30 FS M / LTV39-2 R37 FS M / LTV39-2 R48 FS M / LTV39-2 R56 FS M / LTV39-2 R70 FS M / LTV39-2 R85 FS M / LTV39-2 R120 FS M / Quick chnge chuck. b Femle hex drive. B - Bll retiner 42 Pneumtic Nutrunners Pneumtic Assembly Tools

Shut-off Angle Nutrunners LTV28 AND 38 SERIES Highest relibility when tightening M5-M12 screws. Smll, durble gers. Precise clutch. Relible motor. LTV48 SERIES Robust, relible tools.

35 Shut-off Angle Nutrunners LTV28 AND 38 SERIES Highest relibility when tightening M5-M12 screws. Smll, durble gers. Precise clutch. Relible motor. LTV48 SERIES Robust, relible tools. Reversible for torques up to 200 Nm. Comfortble to operte due to low weight nd smooth hndles. Rection brs nd other ccessories vilble. LTV FS FLUSH SOCKET TOOLS Minimum ngle hed size gives good ccess. High torque ccurcy. Integrted sockets give reduced ngle hed height. Angle Angle hed Air con- Rec. Air Bolt Squre Torque rnge Free hed center sumption t hose inlet size drive soft joint speed Weight Length height to side free speed size thred Model mm in Nm ft lb r/min kg lb mm mm mm l/s cfm mm in Ordering No. Reversible LTV28 R07-6 M5 1/ / LTV28 R07-42 M5 1/ / LTV28 R07-Q M6 1/4 b / LTV28 R15-6 M6 1/ / LTV28 R15-10 M6 3/ / LTV28 R15-Q M6 1/4 b / LTV28 R20-10 M6 3/ / LTV28 R20-42 M6 1/ / LTV28 R28-10 M8 3/ / LTV28 R28-42 M8 1/ / LTV28 RL28-10 M8 3/ / LTV38 R42-10 M8 3/ / LTV38 R42-13 M8 1/ / LTV38 R50-10 M10 3/ / LTV38 R50-13 M10 1/ / LTV38 R57-13 M10 1/ / LTV38 R70-13 M10 1/ / LTV38 R85-13 M / / LTV48 R120-L13 M12 1/ / LTV48 R150-L13 M12 1/ / LTV48 R200-L13 M14 1/ / Flush socket LTV48 R150 FS M / LTV48 R200 FS M / Femle hex drive. b Quick chnge chuck. Pneumtic Assembly Tools Pneumtic Nutrunners 43

Angle Nutrunners Shut-off LTV69 SERIES New twin motor higher rundown speed, ccurte tightening. High torques. Good ccess in crmped spces. Min Min Mx Angle torque torque torque Angle hed Air con- Rec.

36 Angle Nutrunners Shut-off LTV69 SERIES New twin motor higher rundown speed, ccurte tightening. High torques. Good ccess in crmped spces. Min Min Mx Angle torque torque torque Angle hed Air con- Rec. Air Bolt Squre t 3 br t 6.3 br t 6.3 br Free hed center sumption t hose inlet size drive soft joint soft joint soft joint speed Weight Length height to side free speed size thred Model mm in Nm ft lb Nm ft lb Nm ft lb r/min kg lb mm mm mm l/s cfm mm in Ordering No. Reversible LTV69 R M16 1/ / LTV69 R M18 3/ / LTV69 R M / Non-reversible LTV69 N M16 1/ / LTV69 N M18 3/ / LTV69 N M / Fixed reverse. 44 Pneumtic Nutrunners Pneumtic Assembly Tools

Crowfoot Type Angle Nutrunners IN-LINE CROWFOOT TOOLS Dimensions Torque Speed Weight Length A/F A B C D E G H R Model Nm ft lb r/min kg lb mm mm mm mm mm mm mm mm mm mm Ordering No.

2 35 22 10 8431 0616 01 LTC009 R14-12-LI3 6-14 4-10 127 1.8 4 319 12 34 15 12.5 45.5 71 35 30 13 8431 0616 07 LTC28 R18-10-LI3 10-18 7-13 386 1.8 4 421 10 34 15 12.5 36.7 59.

37 Crowfoot Type Angle Nutrunners IN-LINE CROWFOOT TOOLS Dimensions Torque Speed Weight Length A/F A B C D E G H R Model Nm ft lb r/min kg lb mm mm mm mm mm mm mm mm mm mm Ordering No. LTC009 R08-10-LI LTC009 R13-10-LI LTC009 R14-12-LI LTC28 R18-10-LI LTC38 R28-12-LI LTC38 R34-21-LI LTC48 R80-21-LI LTC48 R LI OFFSET CROWFOOT TOOLS Dimensions Torque Speed Weight Length A/F A B C D E F G H R Model Nm ft lb r/min kg lb mm mm mm mm mm mm mm mm mm mm mm Ordering No. LTC009 R07-10-LO LTC29-2R19-10-LO LTC29-2R21-13-LO LTC39-2R28-12-LO LTC39-2R40-14-LO LTC39-2R60-16-LO LTC48 R80-17-LO LTC48 R96-18-LO Extr hevy duty ttchments LTC38 R33-13-A-O LTC48 R56-17-A-O LTC38 R40-17-A-O LTC48 R A-O Pneumtic Assembly Tools Pneumtic Nutrunners 45

Angle Nutrunners Tube Nut IN-LINE TUBE NUT TOOLS Dimensions Torque Speed Weight Length A/F A B C D E G H J R Model Nm ft lb r/min kg lb mm mm mm mm mm mm mm mm mm mm mm Ordering No. LTO28 R06-8-LI3 2.

4 396 10 32 10 13 27.3 25.4 33.5 31 7 9.8 8431 0612 44 LTO28 R15-10-LI3 6-15 4-11 400 2 4.4 397 10 32 12 11 27.9 26.1 33.5 32 8 10.3 8431 0612 46 LTO28 R17-13-LI3 8-17 6-13 350 1.9 4.

38 Angle Nutrunners Tube Nut IN-LINE TUBE NUT TOOLS Dimensions Torque Speed Weight Length A/F A B C D E G H J R Model Nm ft lb r/min kg lb mm mm mm mm mm mm mm mm mm mm mm Ordering No. LTO28 R06-8-LI LTO28 R12-8-LI LTO28 R12-10-LI LTO28 R15-10-LI LTO28 R17-13-LI LTO28 R19-10-LI LTO38 R26-13-LI LTO38 R26-17-LI LTO38 R28-12-LI LTO38 R35-12-LI LTO38 R43-14-LI OFFSET TUBE NUT TOOLS Dimensions Torque Speed Weight Length A/F A B C D E F G J R Model Nm ft lb r/min kg lb mm mm mm mm mm mm mm mm mm mm mm Ordering No. LTO28 R12-12-LO LTO38 R28-13-LO Pneumtic Nutrunners Pneumtic Assembly Tools

Shut-off Angle Nutrunners HOLD AND DRIVE Hold nd drive bolts re being used incresingly by, for exmple, truck mnufcturers on the frme ssembly line, mking wht used to be two mn opertion, one mn tsk.

39 Shut-off Angle Nutrunners HOLD AND DRIVE Hold nd drive bolts re being used incresingly by, for exmple, truck mnufcturers on the frme ssembly line, mking wht used to be two mn opertion, one mn tsk. The distinguishing feture of hold nd drive bolt is tht one prt is held nd the other is tightened from the sme side. LTV HAD Especilly suitble for shock bsorber ssembly. Specil tools bsed on the stndrd LTV series re vilble for use on hold nd drive bolts. HAD sockets re vilble in three different lengths. Specil sockets vilble upon request. Also suitble for brek-wy bolts, Hi Lok/Hi Sher. NOTE: To reduce the rection force in the holder, the use of rection br is recommended. Angle Angle hed Air con- Rec. Air Bolt Torque rnge Free hed center sumption t hose inlet size soft joint speed Weight Length height to side free speed size thred Model mm Nm ft lb r/min kg lb mm mm mm l/s cfm mm in Ordering No. LTV38 R40 LT HAD b M / LTV38 R42 HAD M / LTV38 R50 HAD M / LTV38 R85 HAD M / LTV48 R120 HAD M / LTV48 R150 HAD M / LTV48 R200 HAD M / LTV69 R370 HAD M / At min 5 br. b For low torque pplictions. NOTE: For sockets nd holders see ccessory pges. Other types of Hold nd Drive equipped tools re vilble on specil request. Pneumtic Assembly Tools Pneumtic Nutrunners 47

Angle Nutrunners Non Shut-off STALL TYPE Low inerti design gives ccurte torque independent of joint stiffness in other words, low men shift. Esy torque setting by djusting the inlet ir pressure.

Air Bolt Squre soft joint Free hed center sumption t hose inlet size drive t 6.

4 264 28 11 10 21 10 1/4 8431 0591 07 LMV28 R14-10 M6 3/8 14 10 7 5 1000 1.1 2.4 264 29.5 13.

40 Angle Nutrunners Non Shut-off STALL TYPE Low inerti design gives ccurte torque independent of joint stiffness in other words, low men shift. Esy torque setting by djusting the inlet ir pressure. Relible, well-proven design. Good ccessibility due to smll dimensioned ngle hed. Angle Torque rnge Angle hed Air con- Rec. Air Bolt Squre soft joint Free hed center sumption t hose inlet size drive t 6.3 br t 3 br speed Weight Length height to side free speed size thred Model mm in Nm ft lb Nm ft lb r/min kg lb mm mm mm l/s cfm mm in Ordering No. Reversible LMV28 R11-10 M6 3/ / LMV28 R14-10 M6 3/ / Non reversible LMV28 N16-10 M6 3/ / RATCHET WRENCHES Unique ccessibility, the rtchet wrench is superior tool for limited spce pplictions. To loosen, turn the tool upside down. Angle Torque rnge Angle hed Air con- Rec. Air Bolt Squre soft joint Free hed center sumption t hose inlet size drive t 6.3 br t 3 br speed Weight Length height to side free speed size thred Model mm in Nm ft lb Nm ft lb r/min kg lb mm mm mm l/s cfm mm in Ordering No. LBR33 S26/ M / LBR33 S26/ M / LBR33 S26/ M / Femle hex drive. WORM-DRIVE NUTRUNNERS Tesing throttle chrcteristics give signifi cntly reduced free speed. Suitble for: Nutrunning Light reming Tpping Tube-rolling Cn lso be incorported in rigs s ir motors for intermittent opertion. Angle Torque rnge Angle hed Air con- Rec. Air Bolt Squre soft joint Free hed center sumption t hose inlet size drive t 6.3 br t 3 br speed Weight Length height to side free speed size thred Model mm in Nm ft lb Nm ft lb r/min kg lb mm mm mm l/s cfm mm in Ordering No. LMK33 S001 M / / LMK33 S002 M / / LMK33 S005 M10 7/ / Femle hex drive. 48 Pneumtic Nutrunners Pneumtic Assembly Tools

Angle Nutrunners Accessories Accessories Included FOR LTV MODELS Clutch djustment key FOR LBR, LMV AND LMK MODELS Socket dpter, 3/8" squre drive LMK22, 1/2" squre drive LMK33 Optionl Accessories

LTV28 75 3 4210 3491 93 LTV28 150 6 4210 3491 95 LTV38 (not R70/R85) 75 3 4210 4301 80 LTV38 (not R70/R85) 150 6 4210 4302 80 LTV38 R70/R85/LTV48 75 3 4210 4303 80 LTV38 R70/R85/LTV48 150 6 4210 4304

150 6 4210 4472 84 LTV39-2 R85 75 3 4210 4474 80 LTV39-2 R85 150 6 4210 4475 80 L Rection br kit Protective cover () Protective cover (b) Signl connection kit (RE) FOR LTV AND LTC MODELS Suspension

41 Angle Nutrunners Accessories Accessories Included FOR LTV MODELS Clutch djustment key FOR LBR, LMV AND LMK MODELS Socket dpter, 3/8" squre drive LMK22, 1/2" squre drive LMK33 Optionl Accessories EXTENSIONS FOR LTV Suitble for tool Length of extension "L" mm in Ordering No. LTV LTV LTV38 (not R70/R85) LTV38 (not R70/R85) LTV38 R70/R85/LTV LTV38 R70/R85/LTV LTV39-2 R LTV39-2 R LTV39-2 R48/56/ LTV39-2 R48/56/ LTV39-2 R LTV39-2 R LTV39-2 R LTV39-2 R L Rection br kit Protective cover () Protective cover (b) Signl connection kit (RE) FOR LTV AND LTC MODELS Suspension yoke Protective cover Rection Signl connection Model Exhust hose Fixed Swivelling (see picture) br kit kit (-RE) LTV28 R LTV28, ll models except R LTV29-2/ LTV29-2/39-2 R12/R16 LTV29-2/39-2 R24/R b b LTV38 R42/R50/R (not LTC) LTC38, LTV38 FS LTV38 R LTV38 R85, LTV38 HAD LTV39-2 R48-10/R50-10 LTV39-2 R48-13/R50-13/R b b LTV48 R LTV48 R120/R150/R200, LTC48, LTV48 FS, LTV48 HAD LTV69 N/R LTV69 N/R LTV69 N/R Pneumtic Assembly Tools Pneumtic Nutrunners 49

42 Accessories Angle Nutrunners Optionl Accessories for Flush socket tools INTEGRATED SOCKETS Hexgon socket size AF Socket extension Model mm / in mm Ordering No. LTV29-2 R24/R30 FS nd ETV ST61-30-FS /16" /4" LTV39-2 R37/R48/R56 FS nd ETV ST61-40-FS, ETV ST61-50-FS /16" Socket extension Socket size LTV39-2 R70 FS nd ETV ST61-70-FS /16" /16" LTV39-2 R85/R120 FS, LTV48 R150/R200 FS, nd ETV DS72-160FS/200FS, ETV ST61 100/150/180/200 FS Pneumtic Nutrunners Pneumtic Assembly Tools

43 Angle Nutrunners Accessories Optionl Accessories for Crowfoot tools HEX SOCKETS Width cross flts mm in Ordering No. For LTC38 R33/N41-13-A-O-3 H B C Model mm mm mm 7/ / For LTC38 R40/N48-17-A-O-3 b, LTC48 R56-17-A-O-3 b LTC38 R33 13-A-O LTC38 R40 17-A-O LTC48 R56-17-A-O LTC48 R96-19-A-O LTC48 R A-O LTC38 N41 13-A-O H B C / / For LTC48 R96/R A-O-3 c / mm socket mounted on tool. b 17 mm socket mounted on tool. c 19 mm socket mounted on tool. Optionl Accessories for Open End Type SOCKETS A B Socket size Open end mm mm Ordering No. LTO28 R12-10-L-I-3 5/16" mm /8" mm mm LTO28 R15-10-L-I-3 8 mm mm /8" mm mm /16" mm LTO28 R17-13-L-I-3 3/8" mm mm /16" mm /2" mm mm /16" A B Socket size Open end mm mm Ordering No. LTO38 R26-13-L-I-3 11 mm mm mm /16" mm /8" mm mm /16" mm mm /4" LTO38 R26-17-L-I-3 14 mm /8" mm mm mm /4" mm /16" mm mm /8" /16" mm Pneumtic Assembly Tools Pneumtic Nutrunners 51 B A

44 Accessories Angle Nutrunners Optionl Accessories for Stll type FEMALE HEX SOCKETS Dimensions Ordering No. Ordering No. in LBR33 S26/114 LBR33 S26/118 1/ / / / / / / / NOTE: Tht 1/2" femle hex sockets must be used together with socket dpters. Dimensions Ordering No. Ordering No. in LBR33 S26/114 LBR33 S26/ SOCKET ADAPTERS Ordering No. Ordering No. Dimensions LBR33 S26/114 LBR33 S26/118 1/2" hex 3/8" squre drive /2" hex 1/2" squre drive Optionl Accessories for Hold nd Drive tools NUT SOCKET, SCREW HOLDER AND BIT HOLDER FOR LTV38 R42-HAD/LTV38 R50-HAD AND ETV ST61-28/50 HAD Nut socket (Fig. 1) Width cross flts W mm Socket Ø D mm Ordering No. A B C Mesurements in mm Figure A = 34 B = 54 C = Ø D 30 trvel Screw holder Dimension Suitble Ordering No. X x Y socket size mm mm A B C Two flts Y X 6.6 x x x x W Bit holder Bit holder 1/4" A B C Width N, mm Bits /4" 52 Pneumtic Nutrunners Pneumtic Assembly Tools 13 Bit holder Bit

45 Angle Nutrunners Accessories Optionl Accessories for Hold nd Drive tools NUT SOCKET, SCREW HOLDER AND BIT HOLDER FOR LTV48 R100-HAD AND ETV ST61/ HAD Nut socket (Fig. 2) Width cross flts W mm Socket Ø D mm Ordering No. A B C Mesurements in mm 26 Figure 2 76 A = 33 B = 53 C = trvel 5 Ø D Screw holder Two flts Dimension Suitble Ordering No. X x Y socket size A B C mm mm 33 mm 53 mm 73 mm Two flts Y 7x x x x x x W X Screw holder Mle hexgon Suitble Ordering No. Dimension socket size A B C N mm mm 33 mm 53 mm 73 mm Mle hexgon N W Bit holder Femle hexgon Suitble Ordering No. socket size A B C mm 33 mm 53 mm 73 mm Femle hexgon N W Pneumtic Assembly Tools Pneumtic Nutrunners 53

46 Accessories Angle Nutrunners Optionl Accessories for Hold nd Drive tools NUT SOCKET, SCREW HOLDER AND BIT HOLDER FOR LTV38 R40 LT/R 85 HAD, LTV48 HAD AND ETV ST61/ HAD-HD/120/150/180/200 HAD Nut socket (Fig. 3) Width cross flts W mm Socket Ø D mm Ordering No. A B C Mesurements in mm 26 Figure 3 76 A = 33 B = 53 C = trvel 5 Ø D Screw holder Two flts Dimension Suitble Ordering No. X x Y socket size A B mm mm C Two flts Y 8 x x x x x x W X Screw holder Mle hexgon Suitble Dimension socket size N mm mm A Ordering No. B C Mle hexgon N W Bit holder Femle hexgon Bit holder 5/16" A B C Width N, mm 5/16" Bits Ordering No. Femle hexgon N W 54 Pneumtic Nutrunners Pneumtic Assembly Tools

47 Angle Nutrunners Accessories Optionl Accessories for Hold nd Drive tools NUT SOCKET, SCREW HOLDER AND BIT HOLDER FOR LTV69 R370-HAD AND ETV ST HAD Nut socket (Fig. 4) Width cross flts Socket W mm Ø D mm Ordering No. A B C Mesurements in mm Figure =1" A = 33 B = 53 C = Ø D 40 trvel Screw holder Two flts for LTV69 R370-HAD Dimension Suitble Ordering No. X x Y socket size A B C N mm mm 13 x x Screw holder Mle hexgon for LTV69 R370-HAD Dimension N mm Suitble socket size mm Ordering No. A B C Bit holder Bit holder Socket size mm Ordering No. A B C Bit holder /16" /16" NOTE: 8 mm bit is included in the bit holders. 13 Bit Pneumtic Assembly Tools Pneumtic Nutrunners 55

48 Accessories Angle Nutrunners Productivity Kits Model Mx ir flow Hose, 5 m Coupling Lubriction Ordering No. For smll nutrunners with 3/8" BSP ir inlet MIDI Optimizer F/RD EQ08-C10 16 l/s Cblir 10 mm ErgoQIC 08 Yes For smll nutrunners with 1/4" BSP ir inlet MIDI Optimizer F/RD EQ08-C10 16 l/s Cblir 10 mm ErgoQIC 08 Yes MIDI Optimizer F/RD EQ10-R10 16 l/s Rubir 10 mm ErgoQIC 10 Yes For nutrunners with 3/8" BSP ir inlet MIDI Optimizer F/RD EQ10-C13 23 l/s Cblir 13 mm ErgoQIC 10 Yes For nutrunners with 1/4" BSP ir inlet MIDI Optimizer F/RD EQ10-C13-1/4 23 l/s Cblir 13 mm ErgoQIC 10 Yes For nutrunners with 3/8" BSP ir inlet MIDI Optimizer F/RD EQ10-T13 35 l/s Turbo 13 mm ErgoQIC 10 Yes For nutrunners with 1/2" BSP ir inlet MIDI Optimizer F/R EQ10-T13 35 l/s Turbo 13 mm ErgoQIC 10 No MIDI Optimizer F/RD EQ10-T13 35 l/s Turbo 13 mm ErgoQIC 10 Yes Service Kits The spre prts included in the service kits cover norml overhul of your tool. Alwys hve them vilble for fst nd economicl repir. Min prts included: Vne kit O rings Motor berings Circlips Gskets Pins etc. Model Service kit LTV LTV LTV LTV LTV LTV Pneumtic Nutrunners Pneumtic Assembly Tools

49 Introduction Stright Nutrunners Fst, flexible nd user-friendly The LTD system offers flexible, low-cost solution to mny dvnced tightening requirements. With fixtured tools the opertor influence is minimized nd very high torque ccurcy is chieved. ARTICULATING ARMS Where fixed support on the workpiece for rection br is not vilble, telescopic or rticulted rm mounted LTD nutrunner cn be n efficient solution. Rection br blnks For single spindle hnd-held pplictions. Mounting pltes The LTD stright nutrunners hve splined rection br connection which cn lso be used for fixed ssembly of the nutrunner. A number of stndrd mounting pltes re vilble to order. Floting squre drive For two or more spindles the units must usully hve floting spindles to compenste for run-down vritions. Models with floting squre drive or telescopic front prts re vilble. Fixture punches For mounting of the nutrunner to loclly mde bse pltes punch for the splines connection is vilble s optionl equipment. Air signl outlets All LTD models re equipped with ir signl outlets for completed opertion. THE LTD SYSTEM MOUNTS SPINDLES NUTRUNNER MOTORS REMOTE CONTROL Non reversible Rection br (3-port vlve) Fixed squre drive Mnul or remote control Mounting plte Reversible Fixture punch Mnul control Kits Floting squre drive Reversible (5-port vlve) Remote control Pneumtic Assembly Tools Pneumtic Nutrunners 57

With fst run-down nd ccurte fi nl tightening they offer high productivity nd unmtched torque ccurcy s well s joint independence.

50 Stright Nutrunners Shut-off LTD28, 38 nd 48 stright nutrunners re bsed on the power pck ge nd clutch from the LTV ngle nutrunners. LTD nutrunners re bsed on the unique LTP rnge of twin motor pistol grip nutrunners. With fst run-down nd ccurte fi nl tightening they offer high productivity nd unmtched torque ccurcy s well s joint independence. Remote control bck hed A re mote vlve is connected to the bck hed of the LTD-RR tools llowing better multiple. Accessibility Slim design llows the building of smooth, simple mul ti ples or pired splndle designs. The bsence of clutch mkes these tools shorter. Flexibility The rnge of LTD tools pro vides you with the options you need to meet your requirements. Reversibility Reversible LTD tools re vilble. Air Rec. Air Bolt Squre Torque rnge Free CS consumption hose inlet size drive soft joint speed Weight Length distnce t free speed size thred Model mm in Nm ft lb r/min kg lb mm mm l/s cfm mm in Ordering No. Non reversible, lever strt LTD28 N18-RE M6 3/ / LTD28 N22-RE M6 3/ / Reversible, lever strt LTD28 R8-RE M5-6 3/ / LTD28 R16-RE M6 3/ / LTD28 R20-RE M6-8 3/ / LTD28 R22-RE M6-8 3/ / Reversible, remote control bck hed LTD13 R05-RR M3-5 1/4 b / LTD13 R08-RR M3-5 1/4 b / LTD28 R16-RR M6 3/ / LTD28 R20-RR M6-8 3/ / Non reversible, lever strt, telescopic front prt, trvel 25 mm LTD28 N18F-RE M6 3/ / LTD28 N21F-RE M6 3/ / Reversible, lever strt, telescopic front prt, trvel 25 mm LTD28 R16F-RE M6 3/ / LTD28 R20F-RE M6-8 3/ / LTD28 R22F-RE M6-8 3/ / Reversible, remote control bck hed, telescopic front prt, trvel 25 mm LTD28 R8F-RR M5-6 3/ / LTD28 R16F-RR M6 3/ / LTD28 R20F-RR M6-8 3/ / Non-reversible, lever strt LTD38 N30-RE M8 1/ / LTD38 N55-RE M10 1/ / Reversible, lever strt LTD38 R27-RE M8 1/ / LTD38 R32-RE M8 1/ / LTD38 R38-RE M8-10 1/ / LTD38 R47-RE M8-10 1/ / Reversible, remote control bck hed LTD38 R27-RR M8 1/ / LTD38 R32-RR M8 1/ / LTD38 R38-RR M8-10 1/ / LTD38 R47-RR M8-10 1/ / Air inlet thred = 2 x 1/4" + 1 x 3/8". b 1/4" quick chnge chuck. c Air inlet thred = 2 x 1/2" + 1 x 3/4". Continued Pneumtic Nutrunners Pneumtic Assembly Tools

51 Shut-off Stright Nutrunners Air Rec. Air Bolt Squre Torque rnge Free consumption hose inlet size drive soft joint speed Weight Length CS distnce t free speed size thred Model mm in Nm ft lb r/min kg lb mm mm l/s cfm mm in Ordering No. Non-reversible, lever strt, telescopic front prt, trvel 25 mm LTD38 N30F-RE M8 1/ / LTD38 N44F-RE M8-10 1/ / Reversible, lever strt, telescopic front prt, trvel 25 mm LTD38 R27F-RE M8 1/ / LTD38 R32F-RE M8 1/ / LTD38 R47F-RE M8-10 1/ / Reversible, remote control bck hed, telescopic front prt, trvel 25 mm LTD38 R27F-RR M8 1/ / LTD38 R32F-RR M8 1/ / LTD38 R38F-RR M8-10 1/ / LTD38 R47F-RR M8-10 1/ / Reversible, lever strt LTD48 R65-RE M10 1/ / LTD48 R81-RE M12 1/ / Reversible, remote control bck hed LTD48 R65-RR M10 1/ /16 c LTD48 R81-RR M12 1/ /16 c Reversible, lever strt, telescopic front prt, trvel 25 mm LTD48 R65F-RE M10 1/ / LTD48 R81F-RE M12 1/ / Reversible, remote control bck hed LTD48 R65F-RR M10 1/ /16 c LTD48 R81F-RR M12 1/ /16 c Air inlet thred = 2 x 1/4" + 1 x 3/8". b 1/4" quick chnge chuck. c Air inlet thred = 2 x 1/2" + 1 x 3/4". Shut-off Stright Nutrunners Air con- Air Bolt Squre Torque rnge Min torque Free CS sumption t inlet size drive t 6.3 br t 3 br speed Weight Length distnce free speed thred Spline Model mm in Nm ft lb Nm ft lb r/min kg lb mm mm l/s cfm in type Ordering No. Torque control models with fixed squre drive LTD61 H RE M12 1/ / LTD61 H RE M14 1/ / LTD61 H RE M16 3/ / LTD61 H RE M18 3/ / LTD61 H RE M20 3/ / LTD61 H RE M / LTD61 H RE M / NOTE: Chnge over torque is round 4% of mximum torque on given pressure. Pneumtic Assembly Tools Pneumtic Nutrunners 59

52 Accessories Stright Nutrunners Dimensions TELESCOPIC FRONT PART LTD61 Dimensions N D F L M t Model in mm mm mm mm mm Ordering No. Ø D Ø N M LTD61 H100, H170 1/ LTD61 H230 3/ LTD61 H350, H500 3/ LTD61 H700, H F L t Accessories Included FOR ALL MODELS Torque djustment key Productivity Kits Model Mx ir flow Hose, 5 m Coupling Lubriction Ordering No. For smll nutrunners with 3/8" BSP ir inlet MIDI Optimizer F/RD EQ08-C10 16 l/s Cblir 10 mm ErgoQIC 08 Yes For smll nutrunners with 1/4" BSP ir inlet MIDI Optimizer F/RD EQ08-C10 16 l/s Cblir 10 mm ErgoQIC 08 Yes MIDI Optimizer F/RD EQ10-R10 16 l/s Rubir 10 mm ErgoQIC 10 Yes For nutrunners with 3/8" BSP ir inlet MIDI Optimizer F/RD EQ10-C13 23 l/s Cblir 13 mm ErgoQIC 10 Yes For nutrunners with 1/4" BSP ir inlet MIDI Optimizer F/RD EQ10-C13-1/4 23 l/s Cblir 13 mm ErgoQIC 10 Yes For nutrunners with 3/8" BSP ir inlet MIDI Optimizer F/RD EQ10-T13 35 l/s Turbo 13 mm ErgoQIC 10 Yes For nutrunners with 1/2" BSP ir inlet MIDI Optimizer F/R EQ10-T13 35 l/s Turbo 13 mm ErgoQIC 10 No MIDI Optimizer F/RD EQ10-T13 35 l/s Turbo 13 mm ErgoQIC 10 Yes Service Kits Model Generl service kit LTD Pneumtic Nutrunners Pneumtic Assembly Tools

53 Stright Nutrunners Accessories Optionl Accessories REACTION BAR L Br blnk (steel) Br blnk (luminum) LTD38 N55/R47 Dimensions LTD48 LMD/LTD61 LMD/LTD61 mm LTD28 LTD38 LMD/LTD61-13, L MOUNTING PLATE LTD38 N55/R47 Dimensions LTD48 LMD/LTD61 LMD/LTD61 mm LTD28 LTD38 LMD/LTD61-13, Side mount L W L x W 90 x x Center mount L W L x W 70 x x x Flnge mount D D VALVE KITS. INCLUDES: MAIN VALVE, THROTTLE HANDLE VALVE/VALVES, BRACKET, HOSE NIPPLES AND HOSE CLAMPS. Intended for tool type Vlve type Ordering No. LTD28/38 RE 3-gte for non reversible LTD28 RR 5-gte for reversible LTD48 RE 3-gte for non reversible LTD38/48 RR 5-gte for reversible LTD61 H100, H170, H230 3-gte for non reversible EXHAUST MANIFOLDS. INCLUDES: BLOCK, SILENCER WITH GASKET AND NIPPLES. Intended for tool type Ordering No. LTD28 RR Pneumtic Assembly Tools Pneumtic Nutrunners 61

Introduction Pistol Grip Nutrunners An optimum combintion of torque, speed nd weight With the rnge of pistol grip nutrunners from Atls Copco you get the highest possible torque nd speed in reltion to

54 Introduction Pistol Grip Nutrunners An optimum combintion of torque, speed nd weight With the rnge of pistol grip nutrunners from Atls Copco you get the highest possible torque nd speed in reltion to the weight of the tool. Fst, ccurte nd highly opertor friendly, the tools re vilble in reversible versions for mximum flexibility. FAST AND ACCURATE In LTP/LMP61 tools the twin motor concept provides extremely fst rundown with good torque ccurcy, even on soft joints. OPERATOR FRIENDLY Our pistol grip nutrunners re comfortble to operte. The rection br elimintes rection forces nd the exhust through the hndle rrngement keeps noise levels low. Single-hnded opertion combined with the low weight nd perfectly blnced pistol grip design mke LMP24/61 nd LTP61 nutrunners sfe nd comfortble to use. REVERSIBLE FOR MAXIMUM FLEXI- BILITY Being ble to loosen fsteners without chnging tools sves time nd effort nd rises productivity. 62 Pneumtic Nutrunners Pneumtic Assembly Tools

Fst rundown motor sves time. Extremely good torque output to weight rtio compred to single motor pis tol grip nutrunners. Avilble s both reversible nd nonreversible models.

55 Non Shut-off Pistol Grip Nutrunners The twin motor in the 61 series gives fst er production nd incresed ccurcy with minimum of ir consumption. Torque level on LMP models depends on the pressure of the ir fed to the tool, higher pressure cretes higher torque. High torque ccurcy. Swiveling function mkes tool positioning esy. Fst rundown motor sves time. Extremely good torque output to weight rtio compred to single motor pis tol grip nutrunners. Avilble s both reversible nd nonreversible models. Air con- Air Bolt Squre Mx torque Min torque Free CS sumption t inlet size drive t 6.3 br t 3 br speed Weight Length distnce free speed thred Spline Model mm in Nm ft lb Nm ft lb r/min kg lb mm mm l/s cfm in type Ordering No. Non-reversible LMP24 H M8 3/ / LMP24 H M8 1/ / LMP24 H M10 1/ / LMP61 H M12 1/ / LMP61 H M14 1/ / LMP61 H M16 3/ / LMP61 H M18 3/ / LMP61 H M20 3/ / LMP61 H M / LMP61 H M / Reversible LMP24 HR M6 3/ / LMP24 HR M8 3/ / LMP24 HR M8 1/ / LMP24 HR M10 1/ / LMP61 HR M12 1/ / LMP61 HR M14 1/ / LMP61 HR M16 3/ / LMP61 HR M18 3/ / LMP61 HR M20 3/ / LMP61 HR M / LMP61 HR M / LMP61 HR M / Weight excluding rection br. NOTE: Chnge over torque is round 4% of mximum Recommended hose (61 series) size 13 mm for torque on given ir pressure. hose length up to 5 m nd 16 mm hose size for lenght 5-10 m. Pneumtic Assembly Tools Pneumtic Nutrunners 63

Pistol Grip Nutrunners Shut-off LTP61 models re equipped with twin motors nd shut-off vlve to ensure tht the tool shuts off when the preset torque level is reched. Rundown is twice s fst s the LTP51.

56 Pistol Grip Nutrunners Shut-off LTP61 models re equipped with twin motors nd shut-off vlve to ensure tht the tool shuts off when the preset torque level is reched. Rundown is twice s fst s the LTP51. High torque ccurcy, non depending on ir pressure feeded. Extremely high torque output to weight rtio. A reversible tool with fixed positions for both forwrd nd reverse. Air con- Air Bolt Squre Torque rnge Min torque Free CS sumption t inlet size drive t 6.3 br t 3 br speed Weight Length distnce free speed thred Spline Model mm in Nm ft lb Nm ft lb r/min kg lb mm mm l/s cfm in type Ordering No. Non reversible LTP61 H M12 1/ / LTP61 H M14 1/ / LTP61 H M16 3/ / LTP61 H M18 3/ / LTP61 H M20 3/ / LTP61 H M / LTP61 H M / LTP61 H M / Reversible LTP61 HR M12 1/ / LTP61 HR M14 1/ / LTP61 HR M16 3/ / LTP61 HR M18 3/ / LTP61 HR M20 3/ / LTP61 HR M / LTP61 HR M / LTP61 HR M / LTP61 HR M30 1 1/ / LTP61 HR M36 1 1/ / LTP61 HR M42 1 1/ / Without rection br. Recommended hose size 13 mm for hose length up to 5 m nd 16 mm hose size for lenght 5-10 m. NOTE: Chnge over torque is round 4% of mximum torque on given ir pressure. 64 Pneumtic Nutrunners Pneumtic Assembly Tools

Shut-off Pistol Grip Nutrunners FOR PREVAILING APPLICATIONS LTP61 PH is specilly designed to hndle previling pplictions, such s locking nuts. Specil ger gives higher chngeover torque.

57 Shut-off Pistol Grip Nutrunners FOR PREVAILING APPLICATIONS LTP61 PH is specilly designed to hndle previling pplictions, such s locking nuts. Specil ger gives higher chngeover torque. Fst rundown motor hndles most of the rundown before the slower but stronger tightening motor is used. Air con- Air Bolt Squre Torque rnge Min torque Free CS sumption t inlet size drive t 6.3 br t 3 br speed Weight Length distnce free speed thred Spline Model mm in Nm ft lb Nm ft lb r/min kg lb mm mm l/s cfm in type Ordering No. Non-reversible LTP61 PH M12 1/ / LTP61 PH M14 1/ / LTP61 PH M16 3/ / LTP61 PH M18 3/ / LTP61 PH M20 3/ / LTP61 PH M / LTP61 PH M / LTP61 PH M / Reversible LTP61 PHR M / LTP61 PHR M / LTP61 PHR M / Reversible with Multi Torque unit LTP61 PHR MT M / Without rection br. Recommended hose size 13 mm for hose length up to 5 m nd 16 mm hose size for lenght 5-10 m. NOTE: Chnge over torque is round 10% of mximum torque on given ir pressure. Pneumtic Assembly Tools Pneumtic Nutrunners 65

Pistol Grip Nutrunners Shut-off LTP WITH MULTI TORQUE SELECTOR The Multi Torque Selector mkes it possible to preset up to four different shut-off levels.

Multi-stge tightening opertions re required. Severl different torque settings re needed. Reverse function tht hs fi xed positions for both forwrd nd reverse.

58 Pistol Grip Nutrunners Shut-off LTP WITH MULTI TORQUE SELECTOR The Multi Torque Selector mkes it possible to preset up to four different shut-off levels. The Rotry dil mounted on the tool llows the opertor to select different torque levels without chnging the tool. Idel for situtions where: Severl different ssembly opertions tke plce. Multi-stge tightening opertions re required. Severl different torque settings re needed. Reverse function tht hs fi xed positions for both forwrd nd reverse. Air con- Air Bolt Squre Torque rnge Min torque Free CS sumption t inlet size drive t 6.3 br t 3 br speed Weight Length distnce free speed thred Spline Model mm in Nm ft lb Nm ft lb r/min kg lb mm mm l/s cfm in type Ordering No. LTP61 HR MT M12 1/ / LTP61 HR MT M14 1/ / LTP61 HR MT M16 3/ / LTP61 HR MT M18 3/ / LTP61 HR MT M20 3/ / LTP61 HR MT M / LTP61 HR MT M / LTP61 HR MT M / Without rection br. Recommended hose size 13 mm for hose length up to 5 m nd 16 mm hose size for lenght 5-10 m. NOTE: Chnge over torque is round 4% of mximum torque on given ir pressure. 66 Pneumtic Nutrunners Pneumtic Assembly Tools

Cblir 10 mm ErgoQIC 08 Yes 8202 0850 03 MIDI Optimizer F/RD EQ10-R10 16 l/s Rubir 10 mm ErgoQIC 10 Yes 8202 0850 16 For nutrunners with 3/8" BSP ir inlet MIDI Optimizer F/RD EQ10-C13 23 l/s Cblir 13

59 Pistol Grip Nutrunners Accessories LMP/LTP Productivity Kits Model Mx ir flow Hose, 5 m Coupling Lubriction Ordering No. For smll nutrunners with 3/8" BSP ir inlet MIDI Optimizer F/RD EQ08-C10 16 l/s Cblir 10 mm ErgoQIC 08 Yes For smll nutrunners with 1/4" BSP ir inlet MIDI Optimizer F/RD EQ08-C10 16 l/s Cblir 10 mm ErgoQIC 08 Yes MIDI Optimizer F/RD EQ10-R10 16 l/s Rubir 10 mm ErgoQIC 10 Yes For nutrunners with 3/8" BSP ir inlet MIDI Optimizer F/RD EQ10-C13 23 l/s Cblir 13 mm ErgoQIC 10 Yes For nutrunners with 1/4" BSP ir inlet MIDI Optimizer F/RD EQ10-C13-1/4 23 l/s Cblir 13 mm ErgoQIC 10 Yes For nutrunners with 3/8" BSP ir inlet MIDI Optimizer F/RD EQ10-T13 35 l/s Turbo 13 mm ErgoQIC 10 Yes For nutrunners with 1/2" BSP ir inlet MIDI Optimizer F/R EQ10-T13 35 l/s Turbo 13 mm ErgoQIC 10 No MIDI Optimizer F/RD EQ10-T13 35 l/s Turbo 13 mm ErgoQIC 10 Yes Accessories Included FOR LMP24 Suspension yoke, rection br FOR LMP/LTP61 Suspension yoke Protective cover is included FOR RTP1300 Suspension yoke Protective cover is included Optionl Accessories FOR LMP24 FOR LMP/LTP61 Model Ordering No. Model Ordering No. Hose nipple Swivel ttchment Exhust hose Support hndle (for H/HR002 only) Spindle extension 115 mm x 1/2" (for H/HR002 only) 50 mm x 3/8" (for H/HR011/005 only) 1/4" hex bit holder (for H/HR011/005 only) 1/2" squre dpter (for H/HR011/005 only) Hose nipple Exhust hose Protective cover Stndrd LTP LTP 61 with MT unit Multi torque selector LTP Quick chnge retiner 1/2" squre models /4" squre models " squre models Shut-off override for LTP Swivelling type MultiFlex connector 3/8" (BSP) Swivelling type MultiFlex connector 3/8" (NPT) Multi torque selector LTP61 Protective cover SWIVELLING SUSPENSION YOKE LMP/LTP61 Model Ordering No. Model Ordering No. Model Ordering No. Mounting di Ø 54 mm PH/H PH/H PH/H PH/H PH/H PH/H PH/H Mounting di Ø 60 mm HR HR HR Mounting di Ø 63.5 mm H H H Mounting di Ø 67 mm HR HR PHR/HR PHR/HR HR HR HR Mounting di Ø 83.5 mm PH/H PHR/HR Pneumtic Assembly Tools Pneumtic Nutrunners 67

Accessories LMP/LTP Pistol Grip Nutrunners REACTION BARS LMP/LTP 61 Squre drive size CC distnce Spline di mm mm/in

Steel br Spline 1 268/36/18 4210 1798 01 Spline 2 270/35/10 4220 1903 00 Spline 3 400/56/12 4210 2219 80 Spline 4

3899 03 Spline 9 500/85/20 4210 3899 80 Squre steel brcket Spline 3 100/50/12 4210 2219 03 Spline 4 125/65/16 4210

250/160/20 4220 1972 91 Spline 9 150/85/20 4210 3899 01 Tringulr steel brcket Spline 2 73/72/14 4220 2137 02 Spline

Spline 3 1/2 70-120 4210 4481 83 Spline 3 3/4 70-120 4210 4481 63 Spline 3 1/2 82-218 4210 4616 83 Spline 3 3/4

85 Spline 5 1 82-218 4210 4616 85 Spline 9 1 80-130 4210 4481 89 Spline 9 1 80-280 4210 4616 89 S-Type rection br

4210 4480 06 Spline 8 200/65/20 4210 4480 08 Spline 9 160/40/20 4210 4480 09 L-Type luminum br Spline 3

Extended sliding drive rection br Spline 5 1 68-112 4210 4498 80 Extended sliding tube rection br Spline 5 1 68-112

brcket Tringulr steel brcket Sliding drive rection br S-Type rection br L-Type luminum br Stright luminum br

60 Accessories LMP/LTP Pistol Grip Nutrunners REACTION BARS LMP/LTP 61 Squre drive size CC distnce Spline di mm mm/in mm Ordering No. Steel br Spline 1 268/36/ Spline 2 270/35/ Spline 3 400/56/ Spline 4 500/62/ Spline 5 500/62/ Spline 6 560/80/ Spline 8 500/150/ Spline 9 500/85/ Squre steel brcket Spline 3 100/50/ Spline 4 125/65/ Spline 5 125/65/ Spline 6 200/100/ Spline 7 250/150/ Spline 8 250/160/ Spline 9 150/85/ Tringulr steel brcket Spline 2 73/72/ Spline 3 82/80/ Spline 6 112/109/ Spline 6 150/145/ Sliding drive rection br Spline 3 1/ Spline 3 3/ Spline 3 1/ Spline 3 3/ Spline 4 3/ Spline 4 3/ Spline Spline Spline Spline S-Type rection br Spline 3 110/18/ Spline 4 120/22/ Spline 5 130/25/ Spline 6 125/25/ Spline 8 200/65/ Spline 9 160/40/ L-Type luminum br Spline 3 266x300/29/ Spline 4 144x150/42/ Stright luminum br Spline 3 L = Extended sliding drive rection br Spline Extended sliding tube rection br Spline Brcket stepped Spline 1 70/36/ Spline 2 70/41/ Steel br Squre steel brcket Tringulr steel brcket Sliding drive rection br S-Type rection br L-Type luminum br Stright luminum br Extended sliding drive rection br Service Kits Model Trigger kit Generl service kit LMP LMP/LTP Extended sliding tube rection br 68 Pneumtic Nutrunners Pneumtic Assembly Tools Brcket stepped

Pistol Grip Nutrunners RTP RTP NUTRUNNERS FOR HEAVY DUTY BOLTING RTP s slim gerpck gives you effortless ccess to bolts in crmped

The torque output of the RTP is djusted with n Atls Copco FRL ir pressure unit, helping to prolong the lifetime nd torque ccurcy

Air Bolt Squre Min torque Mx torque Free CS sumption t hose inlet size drive t 1.5 br t 6.

RTP1300-HR20 20-27 3/4 320 236 1300 1000 20 3.7 8.2 248 34 23 48.

5 13 3/8 8431 1040 10 Weight excluding rection br. Included Accessories Model Description Ordering No.

M10, BSP 8202 1220 19 Productivity kit FRL stnd, BSP b 9090 3030 02 b Hose included.

RTP1300 / 4100 MultiFlex swivel 3/8 BSP 8202 1350 22 Trigger gurd 4210 4759 90 RTP1300 Rection br, sliding-drive 4210 4752 90

61 Pistol Grip Nutrunners RTP RTP NUTRUNNERS FOR HEAVY DUTY BOLTING RTP s slim gerpck gives you effortless ccess to bolts in crmped spces. The torque output of the RTP is djusted with n Atls Copco FRL ir pressure unit, helping to prolong the lifetime nd torque ccurcy of the tool. The tool s 1" exchngeble drive simplifies mintennce nd cuts repir costs. RTP4100 RTP1300 Air con- Rec. Air Bolt Squre Min torque Mx torque Free CS sumption t hose inlet size drive t 1.5 br t 6.3 br speed Weight Length distnce free speed size thred Model mm in Nm ft lb Nm ft lb r/min kg lb mm mm l/s cfm mm in Ordering No. RTP1300-HR / / RTP4100-HR / Weight excluding rection br. Included Accessories Model Description Ordering No. RTP1300 Rection br, S-type RTP4100 Rection br, S-type RTP1300 / 4100 Nipple, ErgoNIP 10. M10, BSP Productivity kit FRL stnd, BSP b b Hose included. Rection br, S-type Optionl Accessories Model Description Ordering No. RTP1300 / 4100 MultiFlex swivel 3/8 BSP Trigger gurd RTP1300 Rection br, sliding-drive Rection br, steel br Rection br, squre brcket RTP4100 Rection br, sliding-drive Rection br, steel br Rection br, squre brcket Productivity kit Rection br, sliding-drive NOTE: All rection brs includes snp ring Service Kits Rection br, steel br Model Description Ordering No. RTP1300 Ger / Motor housing Ger / Motor / Motor housing RTP4100 Ger / Motor housing Ger / Motor / Motor housing Rection br, squre brcket Pneumtic Assembly Tools Pneumtic Nutrunners 69

PNEUMATIC SCREWDRIVERS

PNEUMATIC SCREWDRIVERS Introduction Pneumatic Screwdrivers High accuracy, good ergonomics Atlas Copco pneumatic screwdrivers bring accuracy and good ergonomics into the production process, while offering