IN-STOCK RANGE FOR 2014 INTERNATIONAL

Transcription

1 THE NEW IN-STOCK RNGE FOR 2014 INTERNTIONL

2

3 Point of use Hotel & Restaurant : This sunshade model is particularly suitable for the everyday demands of hotels and restaurants. It can be combined with other models of different colours, shapes and sizes. Meadow : This functional and robust sunshade model is highly recommended for large and small lawns. Terrace : Whether your terrace is large, small, square or rectangular, this model adapts to its surroundings and sets the perfect tone in your outdoor area. Balcony : This model puts every last corner of the balcony in the shade and takes up almost no space thanks to its design. Fastenings Base : This sunshade type can be attached to a base or a weighted pedestal, so it can be moved at any time without complex installation. Ground socket : If the sunshade model will be fixed in one place, a ground socket set in concrete is the ideal choice. Lawn spike : Thanks to a lawn spike sunk into the ground, this model can be moved very quickly to a new location in the soft ground. Balcony clamp : Where space is at a premium, this sunshade model can be fastened to the balcony railing with a clamp. Wall clamp : Walls are no obstacle to us, because this sunshade model can be easily fastened to them with a wall clamp. dvice : Use original GLTZ accessories for the best possible fastening and stability. This is the only way to guarantee optimum performance and the GLTZ warranty Glatz G

4 LEXO easy Frame: Frame material: Frame shape: 10 rods made of varnished ash, pole diameter 30 mm, LEXO ribbed gear joint made of nickel - plated brass; rails of fibreglass ash round Shade cover: material class 2 ( 100 % polyester approx. 220 g / m² ) Colour: 150 Eggshell Flounce: Note: not available Wood is a natural product and should not be left in the rain for too long! Fixations: LEXO, D Int. Patents reg. Nominal size LEXO easy Size without flounce Number of rods Material class 2 Colour 150 Order no. Frame ash cm Ø parts Ø parts ccessories Different bases Concrete base 30 kg, Ø cm, incl. support tube Ø mm, galvanised steel Concrete base with carrying handles 40 kg, Ø cm, and support tube Ø mm, galvanized steel Protective cover, coated polyester fabric Protective cover

5 E F G Nominal size Lateral Pole Ø rea covered Slide Height closed Clear headroom Total height Height open Foundation cm deep Recommended base weight max. wind speed open perm. cm cm cm m² cm cm cm cm cm cm cm km/h (Bft.) S M 1 B D E F G H C Z Ø (4) Ø (4) The listed measures represent extrapolated average values that may be slightly different on the product (± 2 % ± 5 cm). The measures of the height are determined by the ST ground socket. If one of the offered bases is used, these measures change only slightly except for the 30 kg concrete base. This latter causes them to go up by 6.5 cm. The height dimensions are based on the ground socket PX. In the base variations these might differ slightly. part from the steel base minus 7.5 cm. The max. wind speed limits as per our separate list apply only in the presence of a fix ground anchorage. In the presence of several sunshades, the minimum between one sunshade and another and between sunshades and walls shall be 20 cm. ø S 10 parts M max. 10 C cm concrete layer (pls pay attention to the soil freezing depth) including a loose water drain covering of max. 10 cm.

6 PIZZINO easy Frame: 8 parts made of hardwood, continuous mast Ø 48 mm, with simple pulley system for easy - opening. Frame material: hardwood ( reddish coloring ) Frame shape: round or square Shade cover: available in the material class 2, colour 150 ( 100 % polyester abt. 220 g / m² ) Colour: 150 Eggshell Flounce: Protective cover Note: not available included in the standard equipment Wood is a natural product and should not be left in the rain for too long! Fixations: Nominal size PIZZINO easy Size without flounce Number of rods Material class 2 Colour 150 Order no. Frame hardwood cm Ø parts Ø 350* 8 parts parts *while stocks last ccessories Fixing option Z (support tube Z required) 40 kg concrete base Z, Ø 60 7 cm Support tube Z, Ø 48 / 55 mm, galvanized steel kg concrete base Z, Ø cm Support tube Z, Ø 48 / 55 mm, galvanized steel Protective cover, coated polyester fabric Protective cover with zip and rod

7 E F G Nominal size Lateral Pole Ø rea covered Slide Height closed Clear headroom Total height Height open Foundation cm deep Recommended base weight max. wind speed open perm. cm cm cm m² cm cm cm cm cm cm cm km/h (Bft.) S M 1 B D E F G H C Z Ø (5) Ø 350* (5) (5) *while stocks last The listed measures represent extrapolated average values that may be slightly different on the product (± 2 % ± 5 cm). The measures of the height are determined by the ST ground socket. If one of the offered bases is used, these measures change only slightly except for the 30 kg concrete base. This latter causes them to go up by 6.5 cm. The height dimensions are based on the ground socket PX. In the base variations these might differ slightly. part from the steel base minus 7.5 cm. The max. wind speed limits as per our separate list apply only in the presence of a fix ground anchorage. In the presence of several sunshades, the minimum between one sunshade and another and between sunshades and walls shall be 20 cm. S ø M max parts 8 parts C cm concrete layer (pls pay attention to the soil freezing depth) including a loose water drain covering of max. 10 cm.

8 LU-STYLE Frame: 6 or 8 rods made of anthracite powder - coated aluminium, upper and lower pole diameter 38 1 mm, with crank, tilt joint for tilting. Framematerial: anthracite powder - coated ( RL 5803 E ) Frameform: round Shade cover: with wind outlet, available in material class 1 ( 100 % polyester approx. 180 g/m² ) Colours: Off-White French-Grey Sand Chili Flounce: Protective cover: not available optional Fixations: LU - STYLE, D Int. Design reg. Nominal size lu-style easy Size without flounce Number of rods Material class 1 Colours 040 / 052 / 056 / 062 Order no. Frame anthracite cm Ø parts Ø parts Ø parts ccessories Fixing option Z (support tube Z required) 40 kg concrete base Z, Ø 60 7 cm Support tube Z, Ø 35 / mm, galvanized steel kg concrete base Z, Ø cm Support tube Z, Ø 35 / mm, galvanized steel Protective cover, coated polyester fabric Protective cover with zip and rod Miscellaneous items Rechargeable battery light Osyrion 4 for pole Ø mm, battery charger with european plug (type C) included (1 accumulator included) Spare accu, 3.6 V, 7500 mh (for Osyrion 4 & 6)

9 E F G Nominal size Lateral Pole Ø rea covered Slide Height closed Clear headroom Total height Height open Foundation cm deep Recommended base weight max. wind speed open perm. cm cm cm m² cm cm cm cm cm cm cm km/h (Bft.) S M 1 B D E F G H C Z Ø (5) Ø (4) Ø (4) The listed measures represent extrapolated average values that may be slightly different on the product (± 2 % ± 5 cm). Traditionally, the nominal dimension is calculated by doubling the rod length. For this reason, the nominal dimension can exceed the specified tolerance range. Height dimensions are based on ground socket BT. These vary slightly depending on the type of base. Except for steel base minus 5 cm. The max. wind speed limits as per our separate sheet apply only if the sunshade canopy is in a horizontal position and if there is a fix ground anchorage. In the presence of several sunshades, the minimum between one sunshade and another and between sunshades and walls shall be 20 cm. S ø ø 8 parts S 6 parts M max. 10 C cm concrete layer (pls pay attention to the soil freezing depth) including a loose water drain covering of max. 10 cm.

10 LU-PUSH easy Frame: Frame colour: Frame shape: 6 or 8 rods made of aluminium, anodized natural, with a profiled pole and stepless height adjustment. Upper pole mm lower pole mm, tilting thanks to the tilt joint. anodized natural round, rectangular or square Shade cover: available in material class 2 ( 100 % polyester approx. 220 g / m² ) Colours: loe Eggshell sh nthracite Chili Flounce: Protective cover: not available optional Fixations: LU - PUSH, Int. Patents reg. D Int. Design reg. Nominal size lu-push easy Size without flounce Number of rods Material class 2 Colours 142/150/151/155/162 Order no. Frame anodized natural cm Ø parts Ø parts Ø parts Ø parts parts parts parts ccessories Fixing option Z (support tube Z required) 40 kg concrete base Z, Ø 60 7 cm Support tube Z, Ø 35 / mm, galvanized steel ***Granite base Z 55kg, cm, natural stone, with castors and retractable handle Support tube Z, Ø 35 / mm, high-grade steel / Protective cover, coated polyester fabric Protective cover with zip and rod Miscellaneous items Rechargeable battery light Osyrion 4 for pole Ø mm, battery charger with european plug (type C) included (1 accumulator included) Spare accu, 3.6 V, 7500 mh (for Osyrion 4 & 6) ***only suitable for smooth, joint free surface coverings

11 E F G Nominal size Lateral Pole Ø rea covered Slide Height closed Clear headroom Total height Height open Foundation cm deep Recommended base weight max. wind speed open perm. cm cm cm m² cm cm cm cm cm cm cm km/h (Bft.) S M 1 B D E F G H C Z Ø (5) Ø (5) Ø (4) Ø (4) (5) (4) (4) In the presence of several sunshades, the minimum between one sunshade and another and between sunshades and walls shall be 20 cm. The listed measures represent extrapolated average values that may be slightly different on the product (± 2 % ± 5 cm). Traditionsgemäss berechnet sich das Nennmass als doppelte Strebenlänge. Deshalb kann das Nennmass ausserhalb der angegebenen Toleranz liegen. Height dimensions are based on ground socket BT. These vary slightly depending on the type of base. Except for steel base minus 5 cm. The max. wind speed limits as per our separate list apply only in the presence of a fix ground anchorage. ø S ø M max. 10 S ' 6 parts 8 parts 6 parts 8 parts C cm concrete layer (pls pay attention to the soil freezing depth) including a loose water drain covering of max. 10 cm.

12 LU-TWIST easy Frame: Frame colour: Frame shape: 6 or 8 rods made of aluminium, anodized natural, with a profiled pole upper pole mm lower pole mm, with crank mechanism for easy opening and twist mechanism for stepless tilting. anodized natural round, rectangular or square Shade cover: available in material class 2 ( 100 % polyester approx. 220 g / m² ) Colours: loe Eggshell sh nthracite Chili Flounce: Protective cover: not available optional Fixations: LU - TWIST, D Int. Design reg. Nominal size LU-TWIST easy Size without flounce Number of rods Material class 2 Colours 142/150/151/155/162 Order no. Frame anodized natural cm Ø parts Ø parts Ø parts parts parts parts ccessories Fixing option Z (support tube Z required) 40 kg concrete base Z, Ø 60 7 cm Support tube Z, Ø 35 / mm, galvanized steel kg concrete base Z, Ø cm Support tube Z, Ø 35 / mm, galvanized steel ***Granite base Z 55kg, cm, natural stone, with castors and retractable handle Support tube Z, Ø 35 / mm, high-grade steel / Protective cover, coated polyester fabric Protective cover with zip and rod Miscellaneous items Rechargeable battery light Osyrion 4 for pole Ø mm, battery charger with european plug (type C) included (1 accumulator included) Spare accu, 3.6 V, 7500 mh (for Osyrion 4 & 6) ***only suitable for smooth, joint free surface coverings

13 E F G Nominal size Lateral Pole Ø rea covered Slide Height closed Clear headroom Total height Height open Foundation cm deep Recommended base weight max. wind speed open perm. cm cm cm m² cm cm cm cm cm cm cm km/h (Bft.) S M 1 B D E F G H C Z Ø (5) Ø (4) Ø (4) (5) (4) (4) In the presence of several sunshades, the minimum between one sunshade and another and between sunshades and walls shall be 20 cm. The listed measures represent extrapolated average values that may be slightly different on the product (± 2 % ± 5 cm). Traditionsgemäss berechnet sich das Nennmass als doppelte Strebenlänge. Deshalb kann das Nennmass ausserhalb der angegebenen Toleranz liegen. Height dimensions are based on ground socket BT. These vary slightly depending on the type of base. Except for steel base minus 5 cm. The max. wind speed limits as per our separate list apply only in the presence of a fix ground anchorage. S ø M max. 10 ' 8 parts 6 parts 8 parts C cm concrete layer (pls pay attention to the soil freezing depth) including a loose water drain covering of max. 10 cm.

14 FORTINO easy Frame: Framematerial: Frame shape: 8 rods made of natural anodized aluminium, 100 % inox, screws and rivets of high - grade steel, two - part profiled pole mm, contrarotating opening system allowing for easy opening. anodized natural round or square Shade cover: available in material class 2 ( 100 % polyester approx. 220 g / m² ) Colours: Eggshell sh Flounce: Protective cover: not available optional Fixations: FORTINO, DInt. Design reg. Nominal size Fortino easy Size without flounce Number of rods Material class 2 Colours 150/151 Order no. Frame anodized natural cm Ø parts Ø parts Ø parts parts parts ccessories Fixing option Z (support tube Z required) 55 kg concrete base Z, Ø cm Support tube Z, Ø 35 / mm, galvanized steel kg concrete base Z, Ø 75 7 cm Support tube Z, Ø 35 / mm, galvanized steel ***Granite base Z 55kg, cm, natural stone, with castors and retractable handle Support tube Z, Ø 35 / mm, high-grade steel / Protective cover, coated polyester fabric Protective cover with zip and rod ***only suitable for smooth, joint free surface coverings

15 F Nominal size Lateral Pole Ø rea covered Slide Height closed Clear headroom Total height Height open Foundation cm deep Recommended base weight max. wind speed open perm. cm cm cm m² cm cm cm cm cm cm cm km/h (Bft.) S M 1 B D E F G H C Z Ø (9) Ø (8) Ø (7) (8) (7) The listed measures represent extrapolated average values that may be slightly different on the product (± 2 % ± 5 cm). Height dimensions are based on ground socket BT. These vary slightly depending on the type of base. Except for steel base minus 5 cm. The max. wind speed limits as per our separate list apply only in the presence of a fix ground anchorage. In the presence of several sunshades, the minimum between one sunshade and another and between sunshades and walls shall be 20 cm. S ø 8 parts 8 parts H G M max. 10 E C cm concrete layer (pls pay attention to the soil freezing depth) including a loose water drain covering of max. 10 cm.

16 FORTERO easy Frame: Framematerial: Frame shape: 8 rods made of natural anodized aluminium, 100 % inox, screws and rivets of high - grade steel, two - part profiled pole mm, contrarotating opening system allowing for easy opening. anodized natural round or square Shade cover: available in material class 2 ( 100 % polyester approx. 220 g / m² ) Colours: Eggshell sh Flounce: Protective cover: not available optional Fixations: FORTERO, D Int. Design reg. Nominal size FORTERO easy Size without flounce Number of rods Material class 2 Colours 150/151 Order no. Frame anodized natural cm Ø parts Ø parts parts parts parts parts parts ccessories Fixing option Z (support tube Z required) 70 kg concrete base Z, Ø 75 7 cm Support tube Z, Ø 48 / 55 mm, galvanized steel kg concrete base Z, Ø cm Support tube Z, Ø 48 / 55 mm, galvanized steel kg natural granite base Z, Ø 73 9 cm Support tube Z, Ø 48 / 55 mm, high-grade steel / Fixing option M4 (support tube M4 required) Base M4, 120 kg, (for 8 plates cm), cm, zinc-plated steel (adjustable and levellable) (price without plates) Support tube M4, Ø 48 / 55 mm, galvanized steel Slab set, 8 pieces, cm, (ca. 110kg), concrete Protective cover, coated polyester fabric Protective cover with zip and rod Miscellaneous items Bistro table (silvergrey) ***only suitable for smooth, joint free surface coverings

17 Nominal size Lateral Pole Ø rea covered Slide Height closed Clear headroom Total height Height open Foundation cm deep Recommended base weight max. wind speed open perm. cm cm cm m² cm cm cm cm cm cm cm km/h (Bft.) S M 1 B D E F G H C Z Ø (7) Ø (7) (7) (7) (8) (7) (7) The listed measures represent extrapolated average values that may be slightly different on the product (± 2 % ± 5 cm). Height dimensions are based on ground socket BT. These vary slightly depending on the type of base. Except for steel base minus 5 cm. The max. wind speed limits as per our separate list apply only in the presence of a fix ground anchorage. In the presence of several sunshades, the minimum between one sunshade and another and between sunshades and walls shall be 20 cm. S F H G ø ' 8 parts 8 parts 8 parts E max. 10 M C cm concrete layer (pls pay attention to the soil freezing depth) including a loose water drain covering of max. 10 cm.

18 FORTELLO easy Frame: Framematerial: Frame shape: 8 rods made of natural anodized aluminium, 100 % inox, screws and rivets of high - grade steel, two - part profiled pole 67 3 mm, contrarotating opening system allowing for easy opening. anodized natural round or square Shade cover: available in material class 2 ( 100 % polyester approx. 220 g / m² ) Colours: 150 Eggshell Flounce: Protective cover: not available optional Fixations: FORTELLO, D Int. Design reg. Nominal size FORTELLO easy Size without flounce Number of rods Material class 2 Colours 150 Order no. Frame anodized natural cm Ø parts parts parts ccessories FORTELLO easy Sales prices Order no. Fixing option M4 (support tube M4 required) Base M4, 120 kg, (for 8 plates cm), cm, zinc-plated steel (adjustable and levellable) (price without plates) Slab set, 8 pieces, cm, (ca. 110kg), concrete Base M4, 180 kg, (for 12 plates cm), cm, zinc-plated steel (adjustable and levellable) (price without plates) Slab set, 12 pieces, cm, (ca. 165 kg), concrete Ground socket M4, galvanized steel Support tube M4, P+, galvanized steel Protective cover, coated polyester fabric Protective cover with zip and rod, cm Miscellaneous items Rechargeable battery light Osyrion 8 for pole Ø mm, battery charger with european plug (type C) included (1 accumulator included) Spare accu, 3.7 V, 4800 mh (for Osyrion 8)

19 Nominal size Lateral Pole Ø rea covered Slide Height closed Clear headroom Total height Height open Foundation cm deep Recommended base weight max. wind speed open perm. cm cm cm m² cm cm cm cm cm cm cm km/h (Bft.) S M 1 B D E F G M 2 C Z Ø (8) (8) (7) The listed measures represent extrapolated average values that may be slightly different on the product (± 2 % ± 5 cm). Height dimensions are based on ground socket BT. These vary slightly depending on the type of base. Except for steel base minus 5 cm. The max. wind speed limits as per our separate list apply only in the presence of a fix ground anchorage. In the presence of several sunshades, the minimum between one sunshade and another and between sunshades and walls shall be 20 cm. S ø 8 parts 8 parts F H G E max. 10 M C cm concrete layer (pls pay attention to the soil freezing depth) including a loose water drain covering of max. 10 cm.

20 SUNWING C + easy Frame: 8 rods graphite grey powder - coated, with crank mechanism and integrated tilting rod for easy tilting of the shade roof up to 90 on both sides. The pole profile is round, 55 5 mm. Framematerial: graphite grey powder - coated ( RL 5803 E ) Frameform: round or square Shade cover: available in material class 2 ( 100 % polyester approx. 220 g / m² ) Colours: Eggshell sh Chili* Flounce: Protective cover: not available included in the standard equipment Fixations: *while stocks last SUNWING C +, D Int. Patents reg. Nominal size Sunwing C+ easy Size without flounce Number of rods Material class 2 Colours 150 / 151 / 162* Order no. Frame graphite grey cm Ø parts Ø parts Ø parts parts *while stocks last ccessories Fixing option Z (support tube Z required) 90 kg concrete base Z, Ø cm Support tube Z, Ø 48 / 55 mm, galvanized steel kg natural granite base Z, Ø 73 9 cm Support tube Z, Ø 48 / 55 mm, high-grade steel / Fixing option PX (support tube PX required) Ground socket PX, galvanised steel Support tube PX, Ø 48 / 55 mm, galvanised steel Fixing option M4 (support tube M4 required) Base M4, 120 kg, (for 8 plates cm), cm, zinc-plated steel (adjustable and levellable) (price without plates) Support tube M4, Ø 48 / 55 mm, galvanized steel Slab set, 8 pieces, cm, (ca. 110kg), concrete Ground socket M4, galvanized steel Support tube M4, Ø 48 / 55 mm, galvanized steel Protective cover, coated polyester fabric Protective cover with zip and rod Miscellaneous items Rechargeable battery light Osyrion 6 for pole Ø mm, battery charger with european plug (type C) included (1 accumulator included) Rechargeable battery light Osyrion 4 for pole Ø mm, battery charger with european plug (type C) included (1 accumulator included) Spare accu, 3.6 V, 7500 mh (for Osyrion 4 & 6) Osyrion 4 & 6 adaptor for Sunwing C +, set of 5 pieces

21 S ø max. 10 E F Nominal size Lateral Pole Ø rea covered Crank handle height Height closed Clear headroom Total height Height of pole Overhang at the back Length of free-arm Foundation cm deep Recommended base weight max. wind speed open perm. cm cm cm m² cm cm cm cm cm cm cm cm kg km/h (Bft.) S M 1 B D E F G M² N Z C Ø (5) Ø (5) Ø (5) (5) The listed measures represent extrapolated average values that may be slightly different on the product (± 2 % ± 5 cm). The measures of the height are determined by the PX ground socket. If one of the offered bases is used, these measures change only slightly. The indicated heights are reduced by 13 cm in the variant with the ground socket M4. The max. wind speed limits as per our separate sheet apply only if the sunshade canopy is in a horizontal position and if there is a fix ground anchorage. In the presence of several sunshades, the minimum between one sunshade and another and between sunshades and walls shall be 20 cm. 8 parts 8 parts M 2 G D M 1 C N Z cm concrete layer (pls pay attention to the soil freezing depth) including a loose water drain covering of max. 10 cm.

22 SOMBRNO easy Frame: 8 rods made of graphite grey powder - coated aluminium, with crank mechanism ( self-locking on both sides ) and tilting rod for effortless tilting of the shade roof on both sides up to 54 degrees. The pole profile is oval mm. M4 turnable ball-bearing base, powder-coated cast steel, is included. Frame colour: graphite grey powder- coated ( RL 5803 E ) Frameform: Shade cover: Colours: round or square self - tautening thanks to the flexible rod ends, available in material class 2 ( 100 % polyester approx. 220 g / m² ) Eggshell sh Flounce: Protective cover: not available included in the standard equipment Fixations: SOMBRNO, D Int. Patents reg. Nominal size SOMBRNO easy Size without flounce Number of rods Material class 2 Colours 150/151 Order no. Frame graphite grey cm Ø parts Ø 400* 8 parts parts parts *while stocks last ccessories Fixing option M4 Base M4, 120 kg, (for 8 plates cm), cm, zinc-plated steel (adjustable and levellable) (price without plates) Slab set, 8 pieces, cm, (ca. 110kg), concrete Base M4, 180 kg, (for 12 plates cm), cm, zinc-plated steel (adjustable and levellable) (price without plates) Slab set, 12 pieces, cm, (ca. 165 kg), concrete Ground socket M4, galvanized steel Protective cover, coated polyester fabric Protective cover with zip and rod for the Sombrano Ø 350 / Protective cover with zip and rod for the Sombrano Ø 400 / Miscellaneous items Rechargeable battery light Osyrion 6 for pole Ø mm, battery charger with european plug (type C) included (1 accumulator included) Rechargeable battery light Osyrion 4 for pole Ø mm, battery charger with european plug (type C) included (1 accumulator included) Spare accu, 3.6 V, 7500 mh (for Osyrion 4 & 6) Osyrion 4 & 6 adaptor for Sombrano, set of 5 pieces

23 D M 2 F Nominal size Lateral Pole Ø rea covered Crank handle height Height closed Clear headroom Total height Height of pole Overhang at the back Length of free-arm Foundation cm deep Recommended base weight max. wind speed open perm. cm cm cm m² cm cm cm cm cm cm cm cm kg km/h (Bft.) S M 1 B D E F G M² N Z C Ø (6) Ø (5) (6) (5) The listed measures represent extrapolated average values that may be slightly different on the product (± 2 % ± 5 cm). The measures of the height are determined by the M4 ground socket. The 120 kg M4 base causes theses measures to go up by 11.5 cm. The max. wind speed limits as per our separate sheet apply only if the sunshade canopy is in a horizontal position and if there is a fix ground anchorage. In the presence of several sunshades, the minimum between one sunshade and another and between sunshades and walls shall be 20 cm. S G M 1 E ø 8 parts 8 parts max. 10 C N Z cm concrete layer (pls pay attention to the soil freezing depth) including a loose water drain covering of max. 10 cm.

24 Price on request