UGY. Planetary Gearbox UGY. Standard Data. Order Reference Example motor combination: with DC motor NF. Gearboxes. 20* x 12,7...
|
|
- Rodger Gibbs
- 5 years ago
- Views:
Transcription
1 UGY Planetary Gearbox UGY Dimensions (mm) Max. torque (cnm) Ratios 2* x 12, ,7 (higher torque on request) 4, (, on request) Standard shaft (mm) 4 with flat (others on request) Motor combination Stepper/Synchronous motor UA ; DC motor NF21G Other motors on requests * at connection ribs larger Standard Data Mounting any position Axial thrust FA 5 N Lateral force FR 1 N (higher force on request) Climatic class wide spread according to DIN IEC Ambient temperature operation C Ambient temperature storage C Weight 5 7 g (with DC motor NF21G) Bearing sintered bronze, self-lubricating (ball bearing on request) Order Reference Example motor combination: with DC motor NF Motor type Motor size Motor version Approval Voltage Gearbox size Gear ratio Connection JP DC Motor (brushed) JP 2 C N M4 Y 4A N E N 2 diameter 24.2 mm C 24 V; no-load speed 59 rpm N standard M4 24 Vdc Y planetary gearbox diameter 2 mm 4A 4,4 (1 stage) N standard A special Bearing/ Gear material Shaft end E N sintered bearing / plastics gear wheels standard shaft 4 with flat All specifications are representative only and maybe subject to variation. For confirmation of values, please contact Johnson Electric. Please also read Saia Motors Important Notes on catalog or at Saia Motors sales@johnsonelectric.com 85
2 UGY Technical Data Technical data of bare gearbox. Data of complete gearmotors on request Stages Ratios * 4,4 19, Max.torque ** 1 2 Short peak torque ** Gear efficiency **,85,75,65,55 * Approximate values, precise values on request. Other ratios between,8 85 on request. ** Approximate values, must be tested under specific operating conditions in application. Higher values on request. Dimensions Example motor combination: with DC motor NF21G; standard shaft 2,4 12 ±,5 2 ±, DC NF21G,5 18, 25 ±,1,5 ±, L ±, 14,8 24,2 ±, 4,5 length L no. of stages 12,7 1 17,7 2 22,7 27, ,5 4 h8 86 Saia Motors sales@johnsonelectric.com
3 UGW Planetary Gearbox UGW Dimensions (mm) Max. torque (Nm) 4 x 62,4 (without motor) 4,5 (higher torque on request) Ratio Standard shaft (mm) Motor combinations 541 (4 stages ; other ratios on request) 8 x 21, with flat (other dimensions on request) Stepper/Synchronous motor UC ; DC motor HC...6 Standard Data Mounting any position Axial thrust FA 2 N (depend on lifetime spec ; higher force on request) Lateral force FR 2 N (depend on lifetime spec ; higher force on request) Climatic class wide spread according to DIN IEC Ambient temperature operation C Ambient temperature storage C Weight 29 g (with DC motor HC1XLG) Bearing sintered bronze, self-lubricating Order Reference Example motor combination: with DC motor HC1XLG Note: UGW is deliverable only as gearbox motor combination Motor type Motor size Motor version Approval Voltage Gearbox size Gear ratio Connection JP DC Motor (brushed) JP A N X9 W 54C N F N diameter 27.5 mm A 1 V; no-load speed 74 rpm N standard X9 1 Vdc W planetary gearbox diameter 4 mm 54C 541 (4 stages) N standard A special Bearing/ Gear material F sintered bearing / metal gear wheels Shaft end N standard shaft 8 x 21. with flat All specifications are representative only and maybe subject to variation. For confirmation of values, please contact Johnson Electric. Please also read Saia Motors Important Notes on catalog or at Saia Motors sales@johnsonelectric.com
4 UGW Technical Data Technical data of bare gearbox. Data of complete gearmotors on request Stages 4 Ratio * 541 Max. torque [Nm] ** 4,5 Short peak torque [Nm] ** 6 Gear efficiency **,6 * Approximate value, precise values on request. Other ratios between,8 541 on request. ** Approximate values, must be tested under specific operating conditions in application. Higher values on request. Dimensions Example motor combination: with DC motor HC1XLG ; standard shaft 12 x screw plug hole for self- tapping screw R17,7 62,4 21, 27,5 18, Saia Motors sales@johnsonelectric.com 11
5 UGD UGD Dimensions (mm) Height (mm) 55 x Max. torque (cnm) 2 Ratios 4 1 / Internal slipping clutch Standard shaft (mm) Weight (g) optional for ratios 1 / 4 x 1 5 Motor combination Series UC, UB and UD; Series UF without UFR/4 and UFB/4 Standard Data Mounting Axial thrust FA Lateral force FR Slipping clutches/free wheel Slipping-/free wheel torque Output shafts any position 1 N 5 N single-way clockwise/counter clockwise function and two way cnm 4 x 1, other on request Climatic class wide-spread according to DIN IEC Ambient temperature operation C Ambient temperature storage C Ratios 4 1 / / / / 2 5 / / / /2 8 1 / / Order Reference Type Ratio Slipping clutch Slipping torque Shaft end Gearbox UGD 1 N 5cNm N 1 N ER EL Z N Without slipping clutch One-way slipping clutch, clockwise One-way slipping clutch, counter clockwise Two-way slipping clutch 5 cnm (for instance) 4 x 1, other on request All specifications are representative only and maybe subject to variation. For confirmation of values, please contact Johnson Electric. Please also read Saia Motors Important Notes on catalog or at Saia Motors sales@johnsonelectric.com 87
6 UGD Dimensions * * output shaft is pushed to the motor side UDS 1..D UBR 1/UBR 2..D UDR 1..D UFM 1/UFU 1/UFR 1..D 88 Saia Motors sales@johnsonelectric.com
7 1 UGD Slipping clutches Roller-type free wheel max. torque available at output shaft (cnm) 2 1 free wheel-/clutch torque (cnm) Single-way slipping clutches Two-way slipping clutches counter clockwise or clockwise function Torque / ratio / life graph cnm UFR 4 UFM 1 / UFR UFR 1 UDR 1 UBR 1 / UDS 1 UBR 2 / UBR 6 2 motor torque with consideration for gear efficiency In combination with motors n=25 rpm, continuous operation and Tambient 1 h 1 h / / / 7 / / 16 / 2 25 / 1 44 / / 1 66 / 75 8 / i In combination with motors n=5 rpm, continuous operation and Tambient 1 h 1 h Saia Motors sales@johnsonelectric.com 89
8 UGM UGM Dimensions (mm) Height (mm) 51 x Max. torque (cnm) 1 Ratios Internal slipping clutch Standard shaft (mm) Weight (g) none 4 x 1 45 Motor combination Series UC, UB and UD; Series UF without UFR/4 and UFB/4 Standard Data Mounting any position Axial thrust FA 2 N Lateral force FR 1 N Output shafts 4 x 1, other on request Climatic class wide-spread according to DIN IEC Ambient temperature operation C Ambient temperature storage C Ratios 12 1 / / Order Reference Type Ratio Slipping clutch Shaft end Gearbox UGM 1 N N 1 N Without slipping clutch N 4 x 1, other on request All specifications are representative only and maybe subject to variation. For confirmation of values, please contact Johnson Electric. Please also read Saia Motors Important Notes on catalog or at 9 Saia Motors sales@johnsonelectric.com
9 UGM Dimensions ø2,2 4,9 ±,1 1, , 1 E 2 2:1 +,1 ø2,9 2,2,4,7 42,5 65,2 +,5 1 1 E1 2:1 6,5 ø2,5 JS12 E2 E1 14,7 ±, 2 +,1 1* ø8 +,5 26 ±,5 1 R,5 ø4 h8 ø8 -,5 ø9 R15,2,5,5 42 ±,2 ø11 ø2, Mounting with standard shaft type "N" (Special shaft on request) ø,5 UDS 1..M UBR 1..M UDR 1..M UFM 1/UFU 1/UFR 1..M Saia Motors sales@johnsonelectric.com 91
10 1 UGM Dimensions UC...M 1 2 R15, h6 8 -,5,5 R, ±,5 +,5 65,2 1 24,2 4,4 14,2 R24 Motor mounting UDS 1..M UBR 1..M UDR 1..M UFM 1/UFU 1/UFR 1..M Torque / ratio / life graph cnm UFR 4 UFM 1 / UFR UFR 1 UDR 1 UBR 1 / UDS 1 UBR 2 / UBR motor torque with consideration for gear efficiency / / / 7 / / 16 / 2 25 / 1 44 / / 1 66 / 75 8 / i In combination with motors n=25 rpm, continuous operation and Tambient 1 h 1 h In combination with motors n=5 rpm, continuous operation and Tambient 1 h 1 h 92 Saia Motors sales@johnsonelectric.com
11 UGB UGB Dimensions (mm) Height (mm) 58 x Max. torque (cnm) 25 Ratios 41 2 / Internal slipping clutch Standard shaft (mm) Weight (g) optional 8 x 12 1 Motor combination Series UC, UB and UD; Series UF without UFR/4 and UFB/4 Standard Data Mounting any position Axial thrust FA 1 N Lateral force FR N Slipping clutches/free wheel single-way clockwise/counter clockwise function and two way Slipping-/free wheel torque cnm Output shafts Ø 8 x 12, other on request Climatic class wide-spread according to DIN IEC Ambient temperature operation C Ambient temperature storage C Ratios 41 2 / 8 1 / / / Order Reference Type Ratio Slipping clutch Slipping torque Shaft end Gearbox UGB 1 N 5cNm N 1 N ER EL Z N Without slipping clutch One-way slipping clutch, clockwise One-way slipping clutch, counter clockwise Two-way slipping clutch 5 cnm 8 x 12, other on request All specifications are representative only and maybe subject to variation. For confirmation of values, please contact Johnson Electric. Please also read Saia Motors Important Notes on catalog or at Saia Motors sales@johnsonelectric.com 9
12 UGB Dimensions UDS 1..B UBR 1/UBR 2..B UDR 1..B UFM 1/UFU 1/UFR 1..B 94 Saia Motors
13 1 UGB Slipping clutches max. torque available at output shaft (cnm) free wheel-/clutch torque (cnm) Roller-type free wheel Single-way slipping clutches Two-way slipping clutches counter clockwise or clockwise direction possible Torque / ratio / life graph cnm 2 UFR 4 UFM 1 / UFR UFR 1 UDR 1 U BR 1 / UDS 1 UBR 2 / UBR motor torque with consideration for gear efficiency In combination with motors n=25 rpm, continuous operation and Tambient 1 h 1 h In combination with motors n=5 rpm, continuous operation and Tambient 1 h 1 h 1 4 / / / 7 / / 16 / 2 25 / 1 44 / / 1 66 / 75 8 / i Saia Motors sales@johnsonelectric.com 95
14 UGF UGF Dimensions (mm) Height (mm) 58 x Max. torque (cnm) 5 Ratios 4 1 / Internal slipping clutch Standard shaft (mm) Weight (g) none 8 x 12 1 Motor combination Series UC, UB, UD, UF Standard Data Mounting any position Axial thrust FA 1 N Lateral force FR 4 N Slipping clutches/free wheel none Slipping-/free wheel torque cnm Output shafts 8 x 12, other on request Climatic class wide-spread according to DIN IEC Ambient temperature operation C Ambient temperature storage C Ratios 4 1 /6 8 1 / 16 2 / 2 5 / / /2 8 1 / / 25 1 / Order Reference Type Ratio Slipping clutch Shaft end Gearbox UGF 1 N N 1 N Without slipping clutch N 8 x 12, other on request All specifications are representative only and maybe subject to variation. For confirmation of values, please contact Johnson Electric. Please also read Saia Motors Important Notes on catalog or at 96 Saia Motors sales@johnsonelectric.com
15 UGF Dimensions UDS 1..F UBR 1/UBR 2..F UDR 1..F UFM 1/UFU 1/UFR 1..F UFR..F UFR 4..F Saia Motors 97
16 1 UGF Torque / ratio / life graph cnm UFR 4 UFM 1 / UFR UFR 1 1 UDR UBR 1 / UDS 1 UBR 2 / UBR motor torque with consideration for gear efficiency In combination with motors n=25 rpm, continuous operation and Tambient 1 h 1 h / / / 7 / / 16 / 2 25 / 1 44 / / 1 66 / 75 8 / i In combination with motors n=5 rpm, continuous operation and Tambient 1 h 1 h 98 Saia Motors sales@johnsonelectric.com
17 UGV UGV Dimensions (mm) Height (mm) 7 x 7 17 Max. torque (cnm) 5 Ratios 8 1 /... 2 Internal slipping clutch Standard shaft (mm) Weight (g) Motor combination none 8 x 12 1 Series UB, UD, UF Standard Data Mounting any position Axial thrust FA 1 N Lateral force FR 4 N Output shafts Ø 8 x 12, other on request Climatic class wide-spread according to DIN IEC Ambient temperature operation C Ambient temperature storage C Ratios 8 1 / 16 2 / / 8 1 / Order Reference Type Ratio Slipping clutch Shaft end Gearbox UGV 1 N N 1 N Without slipping clutch N 8 x 12, other on request All specifications are representative only and maybe subject to variation. For confirmation of values, please contact Johnson Electric. Please also read Saia Motors Important Notes on catalog or at Saia Motors sales@johnsonelectric.com 99
18 1 UGV Dimensions UDS 1..V UBR 1/UBR 2..V UDR 1..V UFM 1/UFU1/UFR 1..V UFR..V UFR 4..V Torque / ratio / life graph cnm UFR 4 UFM 1 / UFR UFR 1 1 UDR UBR 1 / UDS 1 UBR 2 / UBR motor torque with consideration for gear efficiency In combination with motors n=25 rpm, continuous operation and Tambient 1 h 1 h / / / 7 / / 16 / 2 25 / 1 44 / / 1 66 / 75 8 / i In combination with motors n=5 rpm, continuous operation and Tambient 1 h 1 h 1 Saia Motors sales@johnsonelectric.com
19 UGO/UGP UGO/UGP (STG6/61) Dimensions (mm) 65 x 65/68 x 68 Height (mm) Max. torque (cnm) 6 Ratios 6 1 / Internal slipping clutch Standard shaft (mm) Weight (g) Motor combination none 8 x 22 2 series UF and UP UGO (STG 6) UGP (STG 61) Standard Data Ratio Mounting any position Max. input speed* min -1 Max. output torque* 6 cnm Max. input -and output power please refer to table in Technical Data Average back lash unloaded 1.5 degree 2 4 stages with 6 Nm degree 5 6 stages with 6 Nm 4 degree Max. axial force F A N Max. lateral force F R, 12 mm from flange 8 N Max. axial play. mm Max. radial play 2 µm Ambient temperature operation C Ambient temperature storage C 6 1 / /2 18 / ¼ 7 1 / / / / / * Depends on ratio, see next page Order Reference Type Ratio Gearbox STG6 UGO 6 1 /4 M N 6 1 /4 Mounting layouts (fixing) K UGO M UGP through holes R M4 threads on gearbox flange side T M4 threads on motor side V M4 threads on both sides shaft end N Ø 8 x 25, other upon request optional motor pinion: see next pages adaptor plate: see next pages Motor Pinion Data for adaptor plate All specifications are representative only and maybe subject to variation. For confirmation of values, please contact Johnson Electric. Please also read Saia Motors Important Notes on catalog or at Saia Motors sales@johnsonelectric.com 11
20 UGO/UGP Technical Data Ratio Stages * Efficiency Pinion type Weight Max. torque Max. input speed (Nm) (rpm) 6 1 / / / ¼ / / / / / Additionally to the input speed limit: max. 12 rpm output speed Technical Data valid for an ambient temperature operation: C * Direction of rotation of output- and motor-shaft at 2.4 and 6 stages - same and 5 stages - opposite 12 Saia Motors sales@johnsonelectric.com
21 UGO/UGP Dimensions UGO only for i 187,5: h = 29,8 only for i > 187,5: h = 8 only for UGO _ L: Countersink holes x12 on Ø 5,8 52 ±,2 R6,5 (4x) h ±, ±,5 Ø8 -,22 -,16 Ø14 -,4 Ø Ø 4, ±,2 (4x) Ø8 (x) Ø 4, (x) 2,7 (x) only for UGO _ L: additional countersink holes for UP assembling other output shafts and centering acc. to: Ø 2,75 -,5 4 deep (4x) Ø57 Ø1 G8 6 (2x) 12 (2x) not dimensioned holes suitable for adaptor plate AP6 (accessories) holes ø2,75 are intended for thread forming screws M UGP only for UGP _T + UGP _V: additional 4x M4 nuts motor sided only for UGP _R + UGP _V: additional 4x M4 nuts shaft sided Ø57 Ø ±,2 R6 (4x) 22 ±,5 15 Ø 8 -,22 -,16 Ø14 -,4 Ø 2,75 -,5 4 deep (4x) 12 (2x) 68 other output shafts and centering acc. to: Ø 4, ±,2 (4x) 4 h ±, 4 Ø 2,75 -,5 4 deep (2x) 6 (2x) only for i 187,5: h = 29,8 only for i > 187,5: h = 8 Ø1 G8 not dimensioned holes suitable for adaptor plate AP6 (accessories) holes ø2,75 are intended for thread forming screws M Other shafts on request Saia Motors sales@johnsonelectric.com 1
22 UGO/UGP Motor Pinion Data UGO/P (STG 6/61) Dimensions for motor assembly pinion type pinion length b motor pinion with hole d: Ø2.5S7 ØS7 Ø4X7 Ø5S A b L max. A -,2 motor Ø 1h9 d pinion,15 AB B Pinion position Dimension A L 2 gear stages 8,9 9,6-6 gear stages 7,6 7,6 14 Saia Motors sales@johnsonelectric.com
23 UGO/UGP UGO/UGP (STG6/61) Dimensions (mm) 65 x 65/68 x 68 Height (mm) Max. torque (cnm) 6 Ratios 6 1 / Internal slipping clutch Standard shaft (mm) Weight (g) Motor combination none 8 x 22 2 series UF and UP UGO (STG 6) UGP (STG 61) Standard Data Ratio Mounting any position Max. input speed* min -1 Max. output torque* 6 cnm Max. input -and output power please refer to table in Technical Data Average back lash unloaded 1.5 degree 2 4 stages with 6 Nm degree 5 6 stages with 6 Nm 4 degree Max. axial force F A N Max. lateral force F R, 12 mm from flange 8 N Max. axial play. mm Max. radial play 2 µm Ambient temperature operation C Ambient temperature storage C 6 1 / /2 18 / ¼ 7 1 / / / / / * Depends on ratio, see next page Order Reference Type Ratio Gearbox STG6 UGO 6 1 /4 M N 6 1 /4 Mounting layouts (fixing) K UGO M UGP through holes R M4 threads on gearbox flange side T M4 threads on motor side V M4 threads on both sides shaft end N Ø 8 x 25, other upon request optional motor pinion: see next pages adaptor plate: see next pages Motor Pinion Data for adaptor plate All specifications are representative only and maybe subject to variation. For confirmation of values, please contact Johnson Electric. Please also read Saia Motors Important Notes on catalog or at Saia Motors sales@johnsonelectric.com 11
24 UGO/UGP Technical Data Ratio Stages * Efficiency Pinion type Weight Max. torque Max. input speed (Nm) (rpm) 6 1 / / / ¼ / / / / / Additionally to the input speed limit: max. 12 rpm output speed Technical Data valid for an ambient temperature operation: C * Direction of rotation of output- and motor-shaft at 2.4 and 6 stages - same and 5 stages - opposite 12 Saia Motors sales@johnsonelectric.com
25 UGO/UGP Dimensions UGO only for i 187,5: h = 29,8 only for i > 187,5: h = 8 only for UGO _ L: Countersink holes x12 on Ø 5,8 52 ±,2 R6,5 (4x) h ±, ±,5 Ø8 -,22 -,16 Ø14 -,4 Ø Ø 4, ±,2 (4x) Ø8 (x) Ø 4, (x) 2,7 (x) only for UGO _ L: additional countersink holes for UP assembling other output shafts and centering acc. to: Ø 2,75 -,5 4 deep (4x) Ø57 Ø1 G8 6 (2x) 12 (2x) not dimensioned holes suitable for adaptor plate AP6 (accessories) holes ø2,75 are intended for thread forming screws M UGP only for UGP _T + UGP _V: additional 4x M4 nuts motor sided only for UGP _R + UGP _V: additional 4x M4 nuts shaft sided Ø57 Ø ±,2 R6 (4x) 22 ±,5 15 Ø 8 -,22 -,16 Ø14 -,4 Ø 2,75 -,5 4 deep (4x) 12 (2x) 68 other output shafts and centering acc. to: Ø 4, ±,2 (4x) 4 h ±, 4 Ø 2,75 -,5 4 deep (2x) 6 (2x) only for i 187,5: h = 29,8 only for i > 187,5: h = 8 Ø1 G8 not dimensioned holes suitable for adaptor plate AP6 (accessories) holes ø2,75 are intended for thread forming screws M Other shafts on request Saia Motors sales@johnsonelectric.com 1
26 UGO/UGP Motor Pinion Data UGO/P (STG 6/61) Dimensions for motor assembly pinion type pinion length b motor pinion with hole d: Ø2.5S7 ØS7 Ø4X7 Ø5S A b L max. A -,2 motor Ø 1h9 d pinion,15 AB B Pinion position Dimension A L 2 gear stages 8,9 9,6-6 gear stages 7,6 7,6 14 Saia Motors sales@johnsonelectric.com
27 UGJ UGJ Dimensions (mm) Height (mm) 65 x Max. torque (cnm) 15 Ratios 4 1 / Internal slipping clutch Standard shaft (mm) Weight (g) Motor combination none 12 x 2 48 Series UB, UD, UF Standard Data Ratios* Mounting any position Axial thrust FA 4 N Lateral force FR 6 N Output shafts 12 x 2, other on request Climatic class wide-spread according to DIN IEC Ambient temperature operation C Ambient temperature storage C /6 8 1 / 16 2 / 1 / 41 2 / / 8 1 / / / * For ratio 25 combination with UGD Order Reference Type Ratio Slipping clutch Shaft end Gearbox UGJ 1 N N 1 N Without slipping clutch N 12 x 2, other on request All specifications are representative only and maybe subject to variation. For confirmation of values, please contact Johnson Electric. Please also read Saia Motors Important Notes on catalog or at 16 Saia Motors sales@johnsonelectric.com
28 UGJ Dimensions 6 2, ,27 i 2 i , , h R R2 8 +,22 R M 2.5 Mounting with standard shaft type "N" (Special shaft on request) R UDS 1..J, 2 UDS 1..J, 25 UBR 1/UBR 2..J, 25 UDR 1..J, 2 UDR 1..J, i 25 UFM 1/UFU 1/UFR 1..J, i 2 UFR..J, i 2 UFR 4..J, i 2 Saia Motors sales@johnsonelectric.com 17
29 1 UGJ Torque / ratio / life graph cnm motor torque with consideration for gear efficiency In combination with motors n=25 rpm, continuous operation and Tambient 1 h 1 h / / / 7 / UFR / UFM 1 / UFR UFR 1 16 / 2 25 UDR 1 / 1 44 / UBR 1 / UDS / 1 66 / 75 8 / 2 UBR 2 / UBR i In combination with motors n=5 rpm, continuous operation and Tambient 1 h 1 h 18 Saia Motors sales@johnsonelectric.com
30 UGR UGR (STG 2) Dimensions (mm) Height (mm) 7 x 1 8 Max. torque (cnm) 2 Ratios Internal slipping clutch Standard shaft (mm) Weight (g) Motor combination none 12 x 5 depends on ratio UP Standard Data Mounting any position Max. input speed * min -1 Max. output torque * 2 cnm Max. input -and output power * please refer to table in Technical Data Average back lash unload.75 2/ stages with 4/1 Nm /5 stages with 15/2 Nm 2 Max. axial force F A 6 N Max. lateral force F R, 2 mm from flange 8 N Max. axial play. mm Max. radial play 8 µm Ambient temperature operation C Ambient temperature storage C Ratio 12 1 /2 7 1 / / / * Depends on ratio, see next page Order Reference Type Ratio Gearbox UGR 12 ½ N N 12 ½ Mounting layouts Shaft end N N standard Ø 12 x 5, others upon request optional motor pinion: see next pages Motor Pinion Data All specifications are representative only and maybe subject to variation. For confirmation of values, please contact Johnson Electric. Please also read Saia Motors Important Notes on catalog or at Saia Motors sales@johnsonelectric.com 19
31 UGR Technical Data Ratio Stages * Efficiency Pinion type Weight Max. torque Max. input speed (Nm) (rpm) 12 1 / / / / Additionally to the input speed limit: max. 12 rpm output speed Technical Data valid for an ambient temperature operation: C * Direction of rotation of output- and motor-shaft at 2 and 4 stages - same and 5 stages - opposite Dimensions other shafts on request 7 56 ±,2 R5 (4x) other output shafts and centering acc to ,6 ±, ,8 Ø12 -,27 -,2 Ø2 -,5 R 5 ±,5 56 ±, Ø Ø 2,75 -,5 4 deep (4x) 12 (x) 1,6 Ø8 (6x) type label (6x) Ø 2,75 -,5 4 deep (x) Ø 5,5 (4x) 4 ±, 4 42 Ø1 G8 not dimensioned holes suitable for adaptor plate AP6 (accessories) holes ø2,75 are intended for thread forming screws M 11 Saia Motors sales@johnsonelectric.com
32 UGR Motor Pinion Data pinion type pinion length b motor pinion with hole d: ØS7 Ø4X7 Ø5S Dimensions for motor assembly L max. A b A -,2 motor Ø 1h9 d pinion,15 AB B Pinion position Dimension A L 2 gear stages gear stages gear stages gear stages Saia Motors sales@johnsonelectric.com 111
URT UAT1/UAT3 UCM/UCR UBR1/UBR2 UDR. 28 x 24. standard modules customer specific interfaces 250/ /600 24/12 0,8 1,3 0,8 1,3 0,31 0,58 0,38 0,69
Motors URT UAT1/UAT3 UCM/UCR UBR1/UBR2 UDR 13 x 11 20 x 17 28 x 24 36 x 21 48 x 24 smallest motor optional planetary gearbox with diameter 13mm pin connection or flex print long life precision bearing
More informationVane Air Motors - P1V-B
Vane Air Motors - P1V-B These large motors are designed for use in the most arduous applications, requiring considerable power, torque, robustness and reliability Operating information Working pressure:
More informationInstallation and Operational Instructions for EAS - HTL housed overload clutch Sizes 01 3 Type 490._24.0
Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:
More informationCompany Profile.
SPUR OVOID GEARBOX Company Profile MOONS' is one of the largest integrated manufacturers of motion control products within China, using internationally proven scientific management tools along with the
More informationMiniature Precision Worm Gear Reducers Fitted with Miniature DC Motor Nm MAX (4) M2 x 2 Deep. Rated Output Torque Nm 32:1
Miniure Fitted with Miniure DC 0.03 Nm.7 MAX20394 2. Wt run V DC 18.7 PREM Ø13 Ø3 h8 1. 31. 13. (4) M2 x 2 Deep 9 1. 10. Part Number PREM-32 PREM-32-13 Part Number MAX20394 Red Nm 32:1 32:1 Fitted 0.03
More informationASSEMBLIES. Table of Contents C BERG
ASSEMBLIES Table of Contents GEARBOXES - WORM WHEEL AND HELICAL GEARS TECHNICAL DATA - SPEED REDUCERS..................... C 2 WORM & WORM WHEEL GEARS SHAFT SIZE - 1/8, 3/16 AND 1/4......................
More informationFixed Displacement Bent Axis Axial Piston Motors TMB 700
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
More informationPAII Planetary Series Economy Range Steel
PAII Planetary Series Economy steel version of precision AB range Second generation PA Steel & aluminium construction Square B5 style output flange 5 frame sizes from 042 up to 142 17 reduction ratios
More informationCimmaron. glazed porcelain tile
Cimmaron glazed porcelain tile Cimmaron Timber - Canyon Cimmaron has a bold array of strong colors when united create dramatic, random patterning. Glazed porcelain supplies all the characteristics of honed
More informationDCmind: DC direct-drive brush motors
DCmind: DC direct-drive brush motors mm - 5 W Silent motor V and V built in EMC filter class B Excellent efficiency ong life IP5 In accordance with U - CE - ROHS regulations Part numbers V V V Type 95
More informationDCmind: DC direct-drive brush motors
DCmind: DC direct-drive brush motors 6 mm - W Silent motor V and V built in EMC filter class B Excellent efficiency ong life IP6 In accordance with U - CE - ROHS regulations Part numbers V V 8 V 9 V Type
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationB G SPIRAL BEVEL GEARBOXES BG SPIRAL BEVEL GEARBOXES
BG 1 SPECIFICATION GENERAL Spiral bevel gearboxes BG incorporate the most modern advances in bevel gearbox design and construction. These gearboxes offer an extensive range of ratios together with an excellent
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More informationThe STH is a mid-range speed and torque gear reducer that
-SERIES The is a mid-range speed and torque gear reducer that sets a new standard for rotary positioning performance at an exceptional price point. A SHIMPO ABLE planetary gearbox is the interface between
More informationElectromechanical products Poulibloc. General information
Poulibloc General information Poulibloc geared motors with parallel gears are used to adapt the speed of the electric motor to that of the driven machine. Their size is therefore determined by the motor
More informationTXV - Characteristics
TXV - Characteristics TXV pumps are available in 11 models from to 150 cc/rev maximum displacement. Pump reference Direction of rotation Maximum displac. (1) Max. operating pressure Max. peak pressure
More informationplanetroll Planetary Gearheads
planetroll Planetary Gearheads www.diequa.com 630-980-1133 Overview Planetary Servo Gearheads by Planetroll German Engineered - Ecomically Priced The Planetdrive series of precision planetary servo gearheads
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationHR930 Rotary Rake. Illustrated Parts Breakdown. Tongue & Main Frame. Gearbox & Tine Arm
HR0 Rotary Rake Illustrated Parts Breakdown Page Page Page Page Page Page Tongue & Main Frame Guards Gearbox & Tine Arm Axle Assembly Rotary Gearbox PTO Shaft 0//0 Tongue & Main Frame 0 0 0 0 Ref# Description
More informationPlanetary Servo-reducer. SRP Range. The Machine Tool Drives Company
Planetary Servoreucer SRP Range The Machine Tool Drives Company 1 Range Overview SRP Planetary Servoreucer Versatile Drive solution Hightech planetary reucer + universal flange : multiuse solution Flexibility,
More informationPerformance: Spiral Bevel Series
Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationAccessories Encoders COUNTERS CONTROLLERS ENCODERS. Features. Cable-operated mechanism
5125 Cable-operated mechanism Cable-operated mechanisms transform linear movements - following pull-out and draw-in of a rope - into rotations. Depending on the requirements, these rotations can be used
More informationOpen continuous current (DC) motors MS 1 - MS 2. General information
MS 1 - MS 2 General information Open continuous current (dc) motors conforming to the IEC specifications. MS 1 : - frame size 80 to 132 mm, - power 0.44 to 8.85 kw. MS 2 : - frame size 112 and 132 mm,
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationGM SERIES TECHNICAL CATALOG. Crankshaft Design Radial Piston Hydraulic Motors
www.saihyd.com info@saihyd.com Crankshaft Design Radial Piston Hydraulic Motors GM SERIES TECHNICAL CATALOG CONTENTS PAGE Motor Displacement Table 2 Motor Characteristics & Technical Data 3 GM05 Series
More informationTechnical Data Part-turn gearbox 2SP78
Part-turn gearbox 2SP78 Contents Page General data Mounting position, duty classifications, noise level, paint finish and corrosion protection, lubrication, degree of protection, ambient temperature 2
More informationCOMBIBOX Program Schedule. Design. COMBIBOX Clutch-brake-combination type 10 / 09 / 06. Attachments input
COMBIBOX Program Schedule COMBIBOX Clutch-brake-combination type 10 / 09 / 06 with an energised to engage single sided clutch / brake COMBIBOX 10 page 37 with an energised to engage single sided clutch
More informationROBATIC ROBA -quick ROBA -takt. Reliable coupling and braking.
Reliable coupling and braking Equipment Technology Packaging Machinery Conveyors and Materials Handling Equipment Door drives Indexing tables ROBATIC ROBA -quick ROBA -takt www.mayr.de Electromagnetic
More informationNew Product Information Vol.11. Ultra-Flat, Lightweight, Hollow Shaft Gear Unit
New Product Information Vol. SHD-2UH-LW Ultra-Flat, Lightweight, Hollow Shaft Gear Unit Now offering a lightweight gear unit based upon our SHD Series of Ultra-Flat Hollow Shaft Gears! Using new lightweight
More informationWorm geared motors. Orientation 6/2 Overview 6/3 Modular system. General technical data 6/4 Permissible radial force
Siemens AG 2011 Orientation /2 Overview /3 Modular system General technical data / Permissible radial force Geared motors up to 1.1 kw / Selection and ordering data Transmission ratios and maximum torques
More informationInternational standard flanges acc.to SAE, ISO, DIN, GOST. [bar] 0,5 (7.3 PSI)
Gear Pump High Performance Version GP3 up to 1 cm 3 (6.1 inch 3 ) p max 3 (46 PSI) Speed from 35 to 32 RPM Technical Features Operating pressure 29 bar, Peak pressure 3 High-strength quality aluminum alloys
More informationMT30R4 D.C. Servomotors
MT30R4 D.C. Servomotors Technical Data Parameter Unit MT30R4-58 MT30R4-46 MT30R4-37 MT30R4-25 GENERAL Voltage Gradient No Load Volts/1000RPM* 58 46 37 25 Max. Terminal Voltage Volts 140 140 140 100 Max.
More informationRepairs after which the ring gear must be adjusted Page Drift VW 295
Page 1 of 15 39-52 Ring gear, adjusting (Adjusting differential) Repairs after which the ring gear must be adjusted Page 39-37. Special tools, testers and auxiliary items Drift VW 295 Dial gauge extension
More information"PKX" Series Right Angle ServoFit Precision Planetary Gearhead Performance Specification Overview
P "P" Series Right Angle Performance Specification Overview P221 P222 P21 P22 P421 P422 P521 P522 P721 P722 P821 P822 P922 4 5 4 7 5 8 7 8 Acceleration Torque in.lbs. 195 576 106 2,657 6,201 14,17 26,574
More informationC-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence: about
More informationThree-phase roller table motors with squirrel-cage rotor for the application at the frequency converters Series A21O, A20O, ARB, ARC.
Three-phase roller table motors with squirrel-cage rotor for the application at the frequency converters Series A21O, A20O, ARB, ARC Product summary VEM motors GmbH Introduction Roller table motors are
More informationantriebstechnik ELA Electromechanical Linear Actuator
D antriebstechnik ELA Electromechanical Linear Actuator Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of trapezoidal or ball screws driven by an electric motor
More informationSpare parts list Pentruder 6-16
Spare parts list Pentruder 6-16 Page A-G Pentruder 6-16 Page A Spare parts list Pentruder 6-16 Page A 6-16-A01 56020100 Chassis 6-16 6-16-A02 34190100 Gear shaft primary 6-16 6-16-A03 35130100 Gear wheel
More informationCKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology
More informationRA / Internal Gear Pump Model GP3, Series 3X Fixed Displacement. Typical application:
Sizes 20 to 32 Internal Gear Pump Model GP3, Series 3X Fixed Displacement up to 5076 PSI 1.25 to 1.98 in 3 (350 bar) (20.6 to 32.5 cm 3 ) RA 10 234/07.97 Characteristics: Peak pressure of up to 5.076 PSI
More informationTandler. Hypoid. Servo Gearheads
Tandler Hypoid Servo Gearheads ServoFoxx Hypoid Gearboxes The new Hypoid gearbox from Tandler offers the ultimate in performance and connection versatility for dynamic servo driven applications. Benefits:
More informationInternational standard flanges acc.to SAE, ISO, DIN, GOST. [bar] 0,5 (7.3 PSI)
Gear Pump High Performance Version GP3 up to cm 3 (6. inch 3 ) p max 32 bar (46 PSI) Speed from 35 to 32 RPM Technical Features Operating pressure 29 bar, Peak pressure 32 bar High-strength quality aluminum
More informationPrecision on the highest level
6 - line Precision on the highest level The series is the standard Neugart inline high precision planetary gearhead for applications with very high precision requirements. Whether high torque density,
More informationStandard with cone bushing. Backlash-free Safety Clutch
EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC
More informationSeries J Shaft Mounted Gearbox
Series J Shaft Mounted Gearbox Technical Up to - 600kW / 57,000 Nm Industrial Gearbox CJ-2.00GBA1211 PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications from food, energy,
More informationHydraulic Rotary Hammer Drill
M a s c h i n e n f a b r i k G m b H Hydraulic Rotary Hammer Drill Type 2 2406 0010 Techn. Doc. No. 262 Illustration can differ from the original Repair Manual and Spare Parts List 224060010_Inst_en_Version_06.doc
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationPerformances. Standard range dedicated to servo-applications requiring precision, robustness and economy. Up to 290 Nm rated 6
RATIO GROUP A: 1 stage, i = 4-5 - 7-10 2 stages, i = 16-20 - 25-28 - 35-40 - 49-50 - 70-100 RATIO GROUP B: 1 stage, i = 3-4 - 5-7 - 10 2 stages, i = 12-15 - 16-20 - 21-25 - 28-35 - 40-49 - 50-70 - 100
More informationElectric cylinders CASM-100
Electric cylinders CASM-100 Contents Electric cylinder CASM-100.............................4 Product description.................................5 System overview...................................6
More informationup to 250 VAC, 1 A plain lever simulated roller levers none F4 F5 F6 M0 FK4
Snap-action Microswitches Ultraminiature Switches X5 F1 F1N small size low current PCB mounting small size high current long mechanical life PCB mounting from side small size low current long mechanical
More informationWPLE. The right angle gearbox of the PLE series with circular output flange. Economy Line
44 The right angle gearbox of the series with circular output flange The is the logical refinement of our series. This right angle gearbox series was designed especially for spacesaving installation in
More informationHT hypoid bevel gear boxes
HT hypoid bevel gear boxes Solid and Hollow Shaft Design Cycloidal gear boxes Planetary gear boxes evel gear boxes Planetary bevel gear boxes Hypoid gear boxes Gear technology Eppinger hypoid gear boxes
More informationFixed Displacement Plug-In Motor A2FE
Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Plug-In Motor 2FE RE 9008/03.97 replaces 04.96
More informationPower Jacks have taken time, engineering excellence and the best people to produce the ultra compact Neeter Drive gearbox.
202 www.powerjacks.com Power Jacks have taken time, engineering excellence and the best people to produce the ultra compact Neeter Drive gearbox. Our expertise has been built on a history of engineering
More informationExternal gear pump Series G
External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps
More informationTorque. Motor model R
MA series motors CHARACTERISTICS OF THE MA SERIES MOTORS (SAE Motor model Displacement Continuous max. speed (1 Intermittent max. speed (1 Max. flow absorbed Torque Torque at 350 bar (5100 psi Theoretical
More informationInstallation and Operational Instructions for EAS -smartic synchronous clutch Type 48_. 5._ Sizes 01 2
Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:
More informationInstallation and Operational Instructions for ROBATIC -clutch Type and Type Sizes 3 9
Please read the Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationFO, FL, G Series. Variable Stroke Straight Line Action Clamps Product Overview. FL Series. G Series. FO Series. Type of Mounting: Through hole mount
FO, FL, G Series Variable Stroke Straight Line Action Clamps Product Overview FO Series Type of Mounting: Foot Type of Actuation: Hand wheel or hand lever (one-handed operation) Locking lever and Plunger
More informationHP High-Performance Gear Units with <2' Adjustable Backlash
Page HP High-Performance Gear Units with
More informationElectromagnetic tooth clutch Type 546
Electromagnetic tooth clutch Type 546 Characteristics and features high torque transfer despite compact dimensions positive-locking transmission of torque without slip engageable also at low relative speed
More informationWGM SERIES WORM GEARED MOTORS WGM 063 FA 30 DI SO Φ25 PAM80B14 B3
WORM GEARBOXES WORM GEARBOXES page 2 of 17 WGM SERIES WORM GEARED MOTORS BRIEF INTRODUCTION Our worm gear speed reducers range WG and WGM are characterized by a kinematic motion made of a casehardened
More informationELECTRIC MOTORS. Selection. Starting torque and nominal torque
SELECTION PROCEDURE The output powers published overleaf are based upon continuous maximum rating conditions. Therefore design factors for above average running periods do not normally affect the selection.these
More informationMönninghoff electromagnetic tooth clutches
Mönninghoff electromagnetic tooth clutches High torque without slip in compact size Angular synchronisation of input to output possible Torque limiting and other special tooth options readily available
More informationLZL A T L A S C O P C O A I R M O T O R S 4 9
LZL LZL AT L A S C O P C O A I R M O T O R S 9 LZL Vane motors Introduction LZL vane motors are designed to give outstanding starting and low speed performance. This is achieved by using a six vane motor
More informationDYNABLOC Geared Servomotors
DYNABLOC Geared Servomotors Selection guide 5082 en - 2014.01 / b DYNABLOC solutions for intermittent duty applications GEARBOX Planetary or worm/wheel with reduced backlash up to 690 N.m Ratios from 3
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationTELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
More informationAC axial fan. Limited partnership Headquarters Mulfingen County court Stuttgart HRA
S4D45-AP3- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court
More informationFTP Series HIGH FORCE ELECTRIC PRESS ACTUATOR
FTP Series HIGH FORCE ELECTRIC PRESS ACTUATOR Ideal hydraulic press replacement Industry-leading power density Rugged and reliable Flexible and precise 952.500.6200 www.exlar.com 75 FTP Series High Force
More informationSeries W C D PACKAGING FOOD & BEVERAGE STEEL PULP & PAPER MINING. Cone Drive Operations, Inc. 240 East 12th Street Traverse City, MI 49684, USA
PACKAGING FOOD & BEVERAGE STEEL PULP & PAPER MINING C D Cone Drive Operations, Inc. 240 East 12th Street Traverse City, MI 49684, USA T +1 888 994 2663 E orders@conedrive.com W www.conedrive.com ACCUDRIVE
More informationGeneral Terms and Conditions:
Your configuration Part number*: B72DB9E3BD8D Consists of: Motor - DCX22S GB KL 12V Planetary gearhead - GPX22 C 21:1 maxon motor worldwide http://www.maxonmotor.com/maxon/view/content/contact_page E-Mail:
More informationFixed Displacement Motor AA2FM (A2FM)
Fixed Displacement Motor 2FM (2FM) Series 6, for Open and Closed Circuits xial Piston, ent xis Design 5800 psi 6500 psi rueninghaus Hydromatik Sizes 5 1000 Nominal Pressure up to Peak Pressure up to (400
More informationGAM New Products 2018
GAM New Products 218 GPL ROBOTIC PLANETARY GCL ROBOTIC CYCLOIDAL EPR RIGHT ANGLE BEVEL PLANETARY VP PRECISION PLUS SPIRAL BEVEL GAM Can. GAM Company Overview About GAM Founded in 199 by Gary A. Michalek,
More informationAxial piston variable pump A10V(S)O Series 31
Axial piston variable pump A10V()O eries 31 RE 92701 Edition: 06.2016 Replaces: 01.2012 ize 18 (A10VO) izes 28 to 1 (A10VO) Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Features Variable
More informationFixed Displacement Motor A2FM
rueninghaus Hydromatik Series 6, for use in open and closed circuits xial tapered piston - bent axis design Sizes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91001/01.97 RE 91001/01.97
More informationFixed Displacement Pump A2FO
RE 91401/01.97 Brueninghaus Hydromatik eries 6, for open circuits Axial tapered piston - bent axis design izes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91401/01.97 replaces 11.95
More informationHigh Performance: Dyna-Lite Series
High Performance: Dyna-Lite Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna-Lite Series gearboxes to meet your needs. Page 4 provides a list of commonly requested
More informationSTAINLESS STEEL CYLINDER CONSTRUCTION
STAINLESS STEEL CYLINDER CONSTRUCTION In the early 950 s, Clippard introduced miniature pneumatic cylinders and valves to industry. No other manufacturer can boast of the same experience or knowledge of
More informationHARMONIC GEARHEAD. Features & Benefits Specifications... 53
HARMOIC GEARHEAD exen s revolutionary (HG) is the perfect combination of size and precision. Use the integrated with exen s RPS Pinion (HGP) to create a true backlash-free solution from the motor to the
More informationSINGLE PHASE TEFC CAGE MOTORS
SINGLE PHASE TEFC CAGE MOTORS 2 SINGLE PHASE TEF CAGE MOTORS Mechanical protection: IP 54 Voltage: 220 V, 50 Hz Type Output power P N kw Rated speed n N min -1 Efficiency % Power factor cos Rated current
More informationOPERATING INSTRUCTIONS UNLOADING CONVEYOR
OPERATING INSTRUCTIONS UNLOADING CONVEYOR SOLTB-E BA-100103 English, Edition 03/2010 Table of Contents 1. Important Information 2 1.1. EU Declaration of Conformity (pursuant to MRL Appendix II) 2 1.2.
More informationSERIE 59S. Rear clamp. Frontal clamp INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS SIN/COS
INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 2.048 pulses per turn Shaft fixing through front or rear clamp External diameter 58 mm Hollow shaft Ø 10, 12 or 14 mm Protection
More informationTechnical description... 1 Limit switch versions MR 6 Power tables... 6 Dimensions... 7 Spare part lists... 8
Index Technical description... 1 Limit switch versions... 3 MR 6 Power tables... 6 Dimensions... 7 Spare part lists... 8 MS 12 Power tables... 10 Dimensions... 11 Spare part lists... 13 MR 30 Power tables...
More informationMO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option
EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn
More informationThe STH is a mid-range speed and torque gear reducer that
STH-SERIES The STH is a mid-range speed and torque gear reducer that sets a new standard for rotary positioning performance at an exceptional price point. A SHIMPO ABE planetary gearbox is the interface
More informationCOMBIBOX. Program Schedule. with an energised to engage single sided clutch without brake... COMBIBOX 09
COMBIBOX clutch-brake-combination 10 / 09 / 06 with an energised to engage single sided clutch / brake... COMBIBOX 10 with an energised to engage single sided clutch without brake... COMBIBOX 09 with an
More informationLenze. Drives with worm gearboxes 52.
6 887 Lenze Drives with worm gearboxes 5. Lenze Drive Systems GmbH, Postfach 0 5, D-76 Hameln, Site: Groß Berkel, Hans-Lenze-Straße, D-855 Aerzen, Phone ++9 (0) 55 8-0, Telefax ++9 (0) 55 8- E-Mail: Lenze@Lenze.de
More informationElectromagnetic clutch-brake combinations INTORQ
Electromagnetic clutch-brake combinations INTORQ 14.800 14.867 7.5 120 Nm setting the standard 2 CBC en 5/2005 Contents Clutch-brake combinations Product information 4 Type code 6 Design selection 8 Overview
More informationRS & RT WORM GEAR BOXES
RS & RT WORM GEAR BOXES C-MRS-MRT ed0-2009 rev00 GB Product Description Multipurpose housing Aluminium die cast & Grey Iron Modular for all mountings Wormshaft ZI profile, hardened and ground. Alloy steel.
More informationSpare parts list Pentruder CBK HF wall saw
Spare parts list Pentruder CBK HF wall saw Tractive AB, Gjutargatan 54, 781 70 Borlänge, Sweden, Tel: +46 243 22 11 55, Fax: +46 22 11 80, E-mail: info@tractive.se, www.pentruder.com Spare parts list Pentruder
More informationTechnical description...1 Limit switch versions...3. MR 6 Power tables... 6 Dimensions... 7 Spare part lists...8
Index Technical description...1 Limit switch versions...3 MR 6 Power tables... 6 Dimensions... 7 Spare part lists...8 MS 12 Power tables... 10 Dimensions... 11 Spare part lists...13 MR 30 Power tables...
More informationEFFICIENCY PERFECTED. DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5. Feed force [N] Feed speed [m/s]
EFFICIENCY PERFECTED DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5 2000 TEETH RATIO i = 5 Feed force [N] 0000 8000 6000 4000 DE-DG5 m4 DE-DG5 m DE-DG90 m DE-DG90 m2 DE-DG75
More informationVARIABLE-DISPLACEMENT VANE PUMP (HVP-VB1 SERIES)
VARIABLE-DISPLACEMENT VANE PUMP (HVP-VB1 SERIES) The pump cannot be used for water-glycol fluid. (L/min) Deadhead (kw) at No-load (L/min) 1,200 min 1 At Rated Speed HVP-VB1-F12A2-B 0.8 to 3.5 7 8 12 HVP-VB1-F12A3-B
More information736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR VALVE FEATURES The 736 XS-746 XS is a 3 pieces full bore ball valve for industrial fluids, especially made to be easily actuated and to offer a good and long
More informationHPG CSF-GH Helical Gearhead Series. Sizes. New Two-Stage Ratios Coming Soon!
HPG CSF-GH Helical Gearhead Series HPG Helical Series High-Performance Gearhead for Servomotors HPG Helical Series Size 11, 14,, 32 Peak torque 5 4 Reduction ratio 3:1 to :1 Low backlash New Two-Stage
More information