CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company

Size: px
Start display at page:

Download "CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company"

Transcription

1 CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company

2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum Runner Blocks High Speed Ball Rail Systems Corrosion Resistant Ball Rail Systems Wide Ball Rail Systems Ball Rail Systems with Integrated Measuring System Braking and Clamping Units for Ball Rail Systems Gear Racks for Ball Rail Systems Miniature Ball Rail Systems eline Ball Rail Systems Cam Roller Guides Standard Roller Rail Systems Wide Roller Rail Systems Heavy Duty Roller Rail Systems Roller Rail Systems with Integrated Measuring System Braking and Clamping Units for Roller Rail Systems Gear Racks for Roller Rail Systems Linear Bushings and Shafts Linear Bushings, Linear Sets Shafts, Shaft Support Rails, Shaft Support Blocks Ball Transfer Units Traditional Engineering Components Screw Drives Linear Motion Systems Linear Motion Slides Ball Screw Drive Toothed Belt Drive Linear Modules Compact Modules Multi-Axis Motion Systems CMS Precision Modules Ball Rail Tables Controllers, Motors, Electrical Accessories Linear Actuators Ball Screw Drive Toothed Belt Drive Rack and Pinion Drive Pneumatic Drive Linear Motor Ball Screw Drive Toothed Belt Drive Ball Screw Drive Ball Screw Drive Linear Motor

3 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 3 Contents A Single Solution for Many Applications 4 Product Overview (General) 6 Product Overview Motors and Controls 8 Model Overview with Load Capacities 10 Construction 1 Technical Data Load Capacities and Moments 14 Technical Data Drive Data 16 Technical Data Calculations 17 CKR 1-90 Components and Performance Data 18 CKR 1-90 Dimensional Drawings 0 CKR Components and Performance Data CKR Dimensional Drawings 4 CKR Components and Performance Data 6 CKR Dimensional Drawings 8 CKR 5-00 Components 30 CKR 5-00 Performance Data 3 CKR 5-00 Dimensional Drawings 34 Switch Mounting 36 Servo Motors 40 Lubrication Connections 4 Mounting 44 Connection Elements 48 Documentation 5 Ordering Examples 54 Inquiry/Order Form 55

4 4 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) A Single Solution for Many Applications Height Length Load Capacities and Moments The Applications Static Loading Driving Transporting Positioning Speed Complete Systems Including Drive Unit Switch Mounting Accessories Documentation

5 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 5 40mm to 100mm up to 10,000mm Load Capacity C up to 89,340 N Moments M L up to 7,810 Nm Moments M t up to 4,460 Nm up to 00 kg The Solution up to 5 m/s ServoMotor Type MKD or MSM with Gear Reducer, Complete with Drive and Control Rexroth CKR Compact Modules Switching without Switch Cams along the Entire Travel Range Clamping Fixtures, Connection Plates, Connection Elements Frictional Load Measurements Positioning Accuracy

6 6 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Product Overview Compact Modules are precision, ready-to-install linear systems offering high performance within a compact envelope combined with an economical price-toperformance ratio and fast delivery Construction Extremely compact precision aluminum profile (main base structure) with two integrated ball rail guides for optimal movement of heavy loads at high speeds Ready-to-install Compact Modules in selectable lengths up to L max Aluminum carriage available in two lengths, depending on application load Driven by a pre-tensioned steel-cord reinforced polyurethane toothed belt Optional Components Maintenance-free digital servo drive with integrated brake and pre-installed feedback Type LP gear reducer HALL REED sensors Socket with terminals for connecting switches Aluminum profile cable duct for easy mounting of switches Additional Special Characteristics Identical outer dimensions, matching accessories and add-on components to Type CKK Compact Modules Optimal movement, high load capacity, and high rigidity through two integrated, pre-loaded ball rail guides High travel speed, with high precision and low noise, over lengths up to 10,000mm Side-mounted aluminim profiles guide the toothed belt and seal out contaminants Adjustable switches over the entire travel range; switch activation without switch cam (with switch cam for type CKR 5-00) Economical maintenance of the ball rail guides through centralized lubrication (grease) system. Access ports are on top of the carriage and either side of the extrusion

7 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 7 Precision alignment and secure mounting of attachments thanks to threaded bores and dowel pin holes in the carriage Idler (non-driven) end with integral belt tensioning system. Pulley ball bearings are lubricated for life Pilot bore and tapped mounting holes on drive end for simple motor mounting Gear Reducer: A variety of gear ratios allows an optimal match between the load and the motor inertia: i = 3 i = 5 i = 10

8 8 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Product Overview: Motors and Controls Motor Selection Based on the drive and control system To provide a cost-effective solution for every customer application, several motor/drive combinations are offered. When calculating the size of the module, always take the combination of the motor and drive unit into consideration. Digital Servo Motor Type MKD MKD 5B-144 KG1 MKD 41B-144 KG1 MKD 71B-061 KG1 MKD 90B-047 KG1 Digital Servo Motor Type MSM MSM 030 C MSM 040 B

9 X X X X X 8.8 S1 S3 S Indramat AC-CONTROLLER X30 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 9 DKC Digital Drive ECODRIVE Cost-effective solution for single- and multi-axis systems DKC Digital Drive ECODRIVE Cs Compact, dynamic solution for the lower end of the performance range. Compact Modules are available complete with motor, drive, and control.

10 10 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Type Overview with Load Capacities Type Designation (size) Compact modules are identified by designating the Type and the Size. Respective structures without drive also comply with the type and size designation. Compact Module (Example) = System = C = Compact Module Guide = K = Ball Rail Guide Type Size C K R Drive = R = Toothed Belt Drive Guideway Dimensions = ca. Aluminum Profile Dimensions = A Type Guide Drive Compact Module Rexroth Compact Modules CKR Ball Rail Guide Toothed Belt Drive

11 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 11 Overview of Compact Modules with permissible loads L C C C C H A Acceptable Loads (Recommended values based on experience and testing) In consideration of the desired operating life, general loads up to 0% of the dynamic values (C, M t, M L ) have been shown as acceptable. In this respect, do NOT exceed: The maximum permissible load, The permissible drive torque, The permissible speed. Compact Module Dimension A x H Dynamic Load Capacity C (N) short carriage long carriage CKR x 40 4,60 7,500 CKR x 50 14,560 3,650 CKR x 65 34,800 56,530 CKR x ,000 89,340

12 1 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Construction Construction of the CKR 1 Toothed Belt Drive End Assembly 3 Carrige Versions Short carriage version with two runner blocks Long carriage version with four runner blocks 4 Main Body 5 Tensioning End Assembly Additional Components: 6 Switch 7 Cable Duct 8 Socket Plug 7 9 Motor 10 Type LP Gear Reducer

13 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 13 Construction of the Type LP Gear Reducer For all Compact Modules, a planetary gearbox can be installed via a flange. The flange serves as a mounting point for the gearbox to the Compact Module and as an enclosed housing for the connection. This direct connection eliminates the need for a coupling, minimizing torsional deflection. Different gear ratios are available: i = 3 (for CKR and 5-00 only) i = 5 i = 10 1 Servomotor Gear Reducer 3 Flange 4 Drive End Assembly 5 Compact Module

14 14 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Technical Data Load Capacities and Moments Compact Module CKR 1-90 CKR CKR CKR 5-00 Carriage Length Belt Type Dynamic Load Capacity of Dynamic Moments Planar Moment of Inertia Guideway LT C M t M L I x y I y m B L max c spec (N) (Nm) (Nm) (cm 4 ) (cm 4 ) (kg) (N/mm m) 10 AT 3 4, , AT 3 7, , AT 5 14, , AT 5 3, , , AT 5 34,800 1, ,500 1,5 40 AT 5 56,530 1,910, ,500 1,5 65 AT 10 55,000, ,000 4, AT 10 89,340 4,460 7, ,000 4,000 x y x Carriage Mass Maximum Length Specific Belt Stretch Stretching of Toothed Belt L = (F L)/c spec Maximum Permissible Loads Compact Carriage Maximum Permissible Forces Maximum Permissible Moments Module Length LT F y1 F y F x M t M L (N) (N) (N) (Nm) (Nm) CKR ,60 4,10 1, ,500 6,700, CKR ,00 5,600 3, ,190 9,090 5, CKR ,760 13,380 7, ,470 1,730 1, ,080 CKR ,300 1,150 1,60 1, ,710 34,350 19,90,30 3,000 Modulus of Elasticity E Mass E = 70,000 N/mm Mass calculation without motor and switches. Mass formula: Mass (kg/mm) Length L + Mass of all fixed length parts (carriage, drive end, idler end, etc.) (kg) + (additional mass) (kg) Compact Module CKR 1-90 CKR CKR CKR 5-00 Carriage Length LT Drive Type without drive drive i = 1 without drive drive i = 1 without drive drive i = 1 without drive drive i = 1 without drive drive i = 1 without drive drive i = 1 without drive drive i = 1 without drive drive i = 1 Mass (kg) L L L L L L L L L L L L L L L L Additional Mass of Gear Reducer (kg) 1.00 (LP050) 1.00 (LP050) 1.0 (LP050) 1.0 (LP050).9 (LP070).9 (LP070) 4.37 (LP090) / (LP10) 4.37 (LP090) / (LP10)

15 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 15 Note for Dynamic Load Capacities and Moments (see table) M t The determination of the dynamic load capacities and moments is based on 100,000 m of travel. F y1 C F y However, in many cases, only 50,000 is assumed. For this, the following comparison applies: Values C, M t and M L from the table should be multiplied by 1.6. C F x C F x M L M L Compact Module with short carriage M L Compact Module with long carriage

16 16 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Technical Data Drive Data Compact Module Drive Type Gear Reducer Ratio CKR 1-90 CKR CKR CKR 5-00 i = 1 Gear Reducer LP050 i = 1 Gear Reducer LP050 i = 1 Gear Reducer LP070 i = 1 Gear Reducer LP090 Gear Reducer LP10 Max. Drive Torque Lead Constant Belt Type Width Tooth Pitch Max. Belt Drive Transmission Belt Elasticity Limit i M a u b T Force F zul (Nm) (mm/u) (N) (N) AT , AT , AT ,35 4, with keyway AT ,830 17,

17 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 17 Technical Data - Calculations Formulas Nominal Life Expectancy Nominal Life Expectancy in Meters: ( ) 3 C L 10 = 10 5 F m Nominal Life Expectancy in Hours: L 10 L 10h = 3600 v m L 10 = Nominal Life Expectancy in Meters (m) L 10h = Nominal Life Expectancy in Hours (h) C = Dynamic Load Capacity (N) F m = Mean Equivalent of Dynamic Load Capacity (N) v m = Mean Speed (m/s) Frictional Torque With motor mounting via flange and coupling: With motor mounting via gear reducer: M R = M R = M RS M RS i + M RLP M R = Frictional Torque at Motor Shaft M RS = Frictional Torque of System (see table below) M RLP i (Nm) (Nm) = Frictional Torque of Gear Reducer (see table below) (Nm) = Gear Ratio Mass Moment of Inertia For Handling: 6 J M > J fr For Machining: J fr J M = Mass Moment of Inertia of Additional Load (kgm ) = Mass Moment of Inertia of Motor (kgm ) 1.5 J M > J fr Frictional Torque Compact Module Motor Gear Reducer Type CKR 1-90 MKD5B-144 MSM030C Gear Reducer LP050 CKR MKD5B-144 MSM030C Gear Reducer LP050 CKR MKD41B-144 Gear Reducer MSM040B LP070 CKR 5-00 Gear Reducer MKD71B-061 LP090 MKD90B-047 Gear Reducer LP10 i M RS (Nm) M RLP (Nm) 5, , , 5, , 5, , 5,

18 18 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) CKR 1-90 Components and Performance Data Part Number, Length R ,... mm Type (and Dim. Drawing) Guideway Drive Carriage Without Drive OA01 ( ) Shaft for Motor none Without Keyway With Keyway i = 1 i = 1 50 Gear Reducer i = 5, 10 T Length L 10 mm T Length L 156 mm With Drive (i = 1) MA01 ( ) MA0 ( ) 01 right left MA03 ( ) both sides 0 04 For Gear Reducers MG0 MG01 MG04 MG03 MG01 MG0 ( ) MG03 MG04 ( ) 01 For Gear Reducers 1 Shaft Shafts Gear Reducer Performance Data Performance values for horizontal operation with Servo Motor MKD 5B-144 and Drive DKC **.*-040 Connection voltage: 3 x 400 V Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability i = 5 i = Performance values for horizontal operation with Servo Motor MSM 030C and Drive DKC **.*-01 Connection voltage: 1 x 30 V Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability i = 5 i =

19 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 19 Motor Attachment 1) Gear Reducer Motor Motor Type 1st., nd + 3rd Switch Cable Duct Socket/Plug Documentation i = 5 i = 10 Standard Report Measurement Report 00 Without Switch Without Cable Duct REED Sensor HALL Sensor PNP-NC 1 0 Frictional Torque HALL Sensor PNP-NO MKD 5 B 50 Cable Duct MSM 030 C MKD 5 B ) 3) Socket/Plug Positioning Accuracy 31 3 MSM 030 C 1) Motor Attachment also available without motor (enter "00" for motor on order form) ) Version without Brake 3) Version with Brake 7 73 ) 3) Drive Data without Motor (i = 1) Drive Pulley Diameter Lead Constant Speed Belt Type Moment of Inertia (short carriage) Moment of Inertia (long carriage) 8.65 mm 90 mm up to 3 m/s AT 3, width 35 mm, steel-reinforced ( L) 10-4 kgm ( L) 10-4 kgm The tables contain performance data examples for gear reducer/motor/ drive combinations. They are intended to serve as a guide for selection only; exact values must be calculated on an individual basis. Please make sure that the selected combination is allowed (load capacities, moments, maximum RPMs, motor data, etc.)

20 0 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) CKR 1-90 Dimensional Drawings All dimensions in mm Drawings not to scale excess travel max. travel effective stroke 156 (long carriage) 10 (short carriage) max. travel effective stroke excess travel Ø34 H7 1.8 deep M4-8 deep (4x) P9 Ø10 h h= L / 8 L Central lubrication point for grease (both sides) Long Carriage M4-8 deep (8x) Lubrication point for grease, sealed with M4 set-screw Ø10 h 156 Ø 4H7-8 deep (4x) Version OA01 Versions MA01 and MA0 Version MA P P h= h= Ø10 h6 Ø10 h6

21 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 1 7 A B Short Carriage M4-8 deep (4x) Lubrication point for grease, sealed with M4 set-screw A B Ø4H7-8 deep (x) Versions MG01, MG0, MG03 and MG04 Motors MKD 5B and MSM 030C To calculate the length of the Compact Module: L = (stroke + excess travel) + L T + 5 mm 36 (MKD 5B) (MSM 030C) 1) (MSM 030C) ) Ø10 h6 54 (MKD 5B) 60 (MSM 030C) For an example of length calculation, see ordering example. 1) with brake ) without brake

22 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) CKR Components and Performance Data Part Number, Length R ,... mm Type (and Dim. Drawing) Guideway Drive Carriage Without Drive OA01 ( ) Shaft for Motor none Without Keyway With Keyway i = 1 i = 1 50 Gear Reducer i = 5, 10 T Length L 170 mm T Length L 15 mm With Drive (i = 1) MA01 ( ) MA0 ( ) 01 right left MA03 ( ) both sides 0 04 For Gear Reducer MG01 MG03 MG0 MG04 MG01 MG0 ( ) MG03 MG04 ( ) 01 For Gear Reducer 1 Shaft Shafts Gear Reducer Performance Data Performance values for horizontal operation with Servo Motor MKD 5B-144 and Drive DKC **.*-040 Connection Voltage: 3 x 400 V Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability i = 5 i = Performance values for horizontal operation with Servo Motor MSM 030C and Drive DKC **.*-01 Connection Voltage: 1 x 30 V Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability i = 5 i =

23 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 3 Motor Attachment 1) Gear Reducer Motor Motor Type 1st, nd + 3rd Switch Cable Duct Socket/Plug Documentation i = 5 i = 10 Standard Report Measurement Report 00 Without Switch Without Cable Duct REED Sensor HALL Sensor PNP NC 1 0 Frictional Torque HALL Sensor PNP NO MKD 5 B 50 Cable Duct MSM 030 C MKD 5 B ) 3) Socket/Plug Positioning Accuracy 31 3 MSM 030 C 7 73 ) 3) 1) Motor Attachment also available without motor (enter "00" for motor on order form) ) Version without Brake 3) Version with Brake Drive Data without Motor (i = 1) Drive Pulley Diameter Lead Constant Speed Belt Type Moment of Inertia (short carriage) Moment of Inertia (long carriage) 38,0 mm 10 mm up to 5 m/s AT 5, Width 50 mm, steel-reinforced ( L) 10-4 kgm ( L) 10-4 kgm The tables contain performance data examples for gear reducer/motor/ drive combinations. They are intended to serve as a guide for selection only; exact values must be calculated on an individual basis. Please make sure that the selected combination is allowed (load capacities, moments, maximum RPMs, motor data, etc.)

24 4 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) CKR Dimensional Drawings All dimensions in mm Drawings not to scale excess travel max. travel effective stroke 15 (long carriage) 170 (short carriage) effective stroke max. travel excess travel Ø4 H7 deep M5-10 deep (4x) L / L Central lubrication nipple for grease (both sides) Long Carriage M5-10 deep (8x) Ø14 h6 15 Ø 6H7-6.5 deep (4x) Lubrication point for grease, sealed with M6 set-screw Version OA01 Versions MA01 and MA Version MA P9 Ø14 h6 h= P P h= h= Ø14 h6 Ø14 h6

25 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp A B Short Carriage M5-10 deep (4x) 5 5 Lubrication point for grease, sealed with M6 set-screw A B Ø 6H7-6.5 deep (x) (MKD 5B) (MSM 030C) 1) (MSM 030C) ) Versions MG01, MG0, MG03 and MG04 Motors MKD 5B and MSM 030C Ø14 h (MKD 5B) 60 (MSM 030C) To calculate the length of the Compact Module: L = (stroke + excess travel) + L T + 5 mm For an example of length calculation, see ordering example. 1) with brake ) without brake

26 6 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) CKR Components and Performance Data Part Number, Length R ,... mm Type (and Dim. Drawing) Guideway Drive Carriage Without Drive OA01 ( ) Shaft for Motor none Without Keyway With Keyway i = 1 i = 1 50 Gear Reducer i = 3,5,10 T Length L 180 mm T Length L 40 mm With Drive (i = 1) MA01 ( ) MA0 ( ) right left MA03 ( ) both sides 0 04 For Gear Reducer MG0 MG01 MG04 MG03 MG01 MG0 ( ) MG03 MG04 ( ) 01 For Gear Reducer 1 Shaft Shafts Gear Reducer Performance Data: Performance values for horizontal operation with Servo Motor MKD 41B-144 and Drive DKC **.*-040 Connection Voltage: 3 x 400 V Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability i = i = i =

27 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 7 Motor Attachment Gear Reducer Motor Motor Type 1st, nd + 3rd Switch Cable Duct Socket/Plug Documentation i = 3 i = 5 i = 10 Standard Report Measurement Report 00 Without Switch Without Cable Duct REED Sensor HALL Sensor PNP-NC 1 0 Frictional Torque HALL-Sensor PNP-NO MKD 41 B 10 Cable Duct MSM 040 B MKD 41 B ) 3) Socket/Plug Positioning Accuracy MSM 040 B Performance values for horizontal operation with Servo Motor MSM 040B and Drive DKC **.*-018 Connection Voltage: 1 x 30 V ) 3) 1) Motor Attachment also available without motor (enter "00" for motor on order form) ) Version without Brake 3) Version with Brake Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability Drive Data without Motor (i = 1) Drive Pulley Diameter Lead Constant Speed Belt Type Moment of Inertia (short carriage) Moment of Inertia (long carriage) i = i = mm 165 mm to 5 m/s AT 5, width 70 mm with steel reinforcement. ( L) 10-4 kgm ( L) 10-4 kgm The tables contain performance data examples for gear reducer/motor/drive combinations. They are intended to serve as a guide for selection only; exact values must be calculated on an individual basis. Please make sure that the selected combination is allowed (load capacities, moments, max. RPMs, motor data, etc.)

28 8 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) CKR Dimensional Drawings All dimensions in mm Drawings not to scale excess travel Ø49 H7.5 deep max. travel effective stroke M6-1 deep (4x) 40 (long carriage) 180 (short carriage) max. travel effective stroke excess travel L L / Central lubrication nipple for grease (both sides) Long Carriage M6-1 deep (8x) 48 Lubrication point for grease, sealed with M6 set-screw 40 Ø 6H7-7.5 deep (4x) Ø19 h Version OA01 Versions MA01 and MA Version MA P9 Ø19 h P9 h= h= P9 h= Ø19 h6 Ø19 h6

29 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 9 6 A B Short Carriage M6-1 deep (4x) Lubrication point for grease, sealed with M6 set-screw 48 A B Ø 6H7-7.5 deep (x) Versions MG01, MG0, MG03 and MG04 Motors MKD 41B and MSM 040 B 43 (MKD 41B) (MSM 040B) 1) (MSM 040B) ) Ø19 h6 8 (MKD 41B) 80 (MSM 040B) To calculate the length of the Compact Module: L = (stroke + excess travel) + L T + 5 mm For an example of length calculation, see ordering example. 1) with brake ) without brake

30 30 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) CKR 5-00 Components Part Number, Length R ,... mm Type (and Dim. Drawing) Guideway Drive Carriage Without Drive OA01 ( ) Shaft for Motor none Without Keyway With Keyway i = 1 i = 1 50 Gear Reducer i = 3,5,10 T Length L 65 mm T Length L 405 mm With Drive (i = 1) MA01 ( ) MA0 ( ) right left MA03 ( ) both sides 0 04 For Gear Reducer MG0 MG01 MG04 MG03 MG01 MG0 ( ) MG03 MG04 ( ) 01 With Gear Reducer 1 Shaft Shafts LP10 LP090 LP10 LP ) Motor Attachment also available without motor (enter "00" for motor on order form) ) Switch brackets can only be used in conjunction with connection plates. 3) Magnetic field sensors and mechanical/inductive switches cannot be used on the same side.

31 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 31 Motor Attachment 1) Gear Reducer Motor Motor Type 1st, nd + 3rd Switch Cable Duct Switch Bracket ) Documentation i = 3 i = 5 i = 10 Standard Report Measureent Report 00 Without switch, socket/plug, cable duct, and mounting channel Switch: Magnetic field sensor 3) External switch REED Sensor 1 Cable Duct 5 Frictional Torque HALL Sensor PNP-NC 01 HALL Sensor PNP-NO 3 Socket/Plug MKD 071 B MKD 090 B MKD 071 B Switch: Mechanical/Inductive 3) External switch PNP-NC PNP-NO Mechanical Switch bracket Switch brackets Positioning Accuracy MKD 090 B 13 Cable Duct Length = L 0 Socket/Plug 17

32 3 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) CKR 5-00 Performance Data Performance Data for Gear Reducer LP 090 Performance values for horizontal operation with Servo Motor MKD 71B-061 and Drive DKC **.*-100 Connection Voltage: 3 x 400 V Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability i = i = i = Performance values for horizontal operation with Servo Motor MKD 90B-047 and Drive DKC **.*-100 Connection Voltage: 3 x 400 V Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability i = i = i = ,

33 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 33 Performance Data for Gear Reducer LP 10 Performance values for horizontal operation with Servo Motor MKD 90B-047 and Drive DKC **.*-100 Connection Voltage: 3 x 400 V Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability Gear Reducer Ratio Mass (kg) Acceleration Time t (ms) Acceleration Distance s Acceleration a (m/s ) Speed v (m/s) Repeatability i = i = i = Drive Data without Motor (i = 1) Drive Pulley Diameter Lead Constant Speed Belt Type Moment of Inertia (short carriage) Moment of Inertia (long carriage) mm 50 mm up to 5 m/s AT 10, Width100 mm, steel-reinforced ( L) 10-4 kgm ( L) 10-4 kgm The tables contain performance data examples for gear reducer/motor/drive combinations. They are intended to serve as a guide for selection only; exact values must be calculated on an individual basis. Please make sure that the selected combination is allowed (load capacities, moments, maximum RPMs, motor data, etc.)

34 34 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) CKR 5-00 Dimensional Drawings All dimensions in mm Drawings not to scale max. travel 405 (long carriage) 65 (short carriage) max. travel excess travel effective stroke effective stroke excess travel Ø68 H7.5 deep M8-15 deep (4x) L / L Central lubrication point for grease (both sides) Long Carriage M8-16 deep (8x) Ø4 h6 Lubrication point for grease sealed with M8 set-screw Ø 8H7-10 deep (4x) Version OA01 Versions MA01 and MA Version MA P h=4 40 Ø4 h P P h=4 Ø4 h h=4 Ø4 h6 61

35 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 35 A B C D Short Carriage 66 M8-16 deep (4x) Lubrication point for grease sealed with M8 set-screw (84) A 4.8 C (38) B D Ø 8H7-10 deep (x) Versions MG01, MG0, MG03 and MG04 Motors MKD 71B and MKD 90 B Ø4 h To Calculate the Length of the Compact Module L = (stroke + excess travel) + L T + 5 mm For example of length calculation, see the ordering example. 45 (LP090) 75 (LP10) 11 (LP090) 140 (LP10) 64 (MKD 71B) 313 (MKD 90B) 10 (LP090) 140 (LP10) 115 (MKD 71B) 140 (MKD 90B)

36 36 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Switch Mounting Overview of the Switching System The following switch types may be used with Compact Modules: Magnetic field sensors (Hall and Reed Sensors) For CKR 5-00, mechanical and inductive switches may also be used Different switch types cannot, however, be used on the same side of the Compact Module. Switching System: Magnetic Field Sensor Hall Sensor and Reed Sensor 1 Socket and Plug Switch 3 Cable Duct (black anodized aluminum extrusion) Magnetic Field Sensor Mechanical and Inductive Switch Magnetic field sensors are suitable for speeds up to m/s. For safety reasons, mechanical/inductive switches are to be used at higher speeds (please inquire)! Short Stroke: Pay attention to the length of the socket and switch! Magnetic Field Sensor Miniature switch with potted cable: Version: Hall Sensor (NC/NO) or Reed Sensor (Relay) Assembly Note: Switches may be on one side of the compact module only (left or right), and and should only be installed after the compact module has been installed on its base structure. A cable duct is required to attach the switches. Switches are inserted in the upper T-slot (CKR 1-90, ) or the lower T-slot (CKR 0-145, CKR 5-00) of the cable duct and secured with set-screws Active Surface 3 Set-screw for mounting Hall Sensor Contact Type Operating Voltage Current Draw Output Current Cable Length Housing Protection Class Short Circuit Protection Maximum Speed PNP NC / NO V DC max. 10 ma max. 0 ma m (10 m by request) IP 66 No m/s Reed Sensor Contact Type Switching Voltage Switching Current Cable Length Housing Protection Class Maximum Speed IMPORTANT: switching points! Relay max. 100 V DC max. 0.5 A m (10 m by request) IP 66 m/s

37 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 37 Wiring Schematic Hall Sensor White: Green: VDC Output Reed Sensor Brown White Brown: OV ground Green Cable Duct Function: To attach and secure switches Cable routing Assembly Note: The cable duct hooks into the T-slots on the maing body and is secured with setscrews. Set-screws are included. 7.5 CKR 1-90 and CKR CKR CKR Socket and Plug The socket must be installed on the side with the switches Sockets and plugs have 16 pins. Sockets and switches are not wired. This allows optimal assignment of the switch positions during set-up. 8.5 PG 16 One plug is included. The plug can be installed in three directions. Ø pin plug Ordering of Switches and Accesories Pos. 1 Socket / Plug Switch Reed Sensor Hall Sensor 3 Cable Duct Refer to the following table for part numbers. Accessories can also be ordered separately. Part Number for installation on: CKR 1-90, CKR , CKR 0-145, CKR 5-00 R R PNP-NC R / PNP-NO R R01CKDUCT

38 38 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Switch Mounting Mechanical and Inductive Switches with CKR 5-00 Overview of the Switching System 1 Socket and Plug Mechanical Switch 3 Inductive Switch 4 Cable Duct 5 Switching Cam (For installation on Connection Plates only. For other applications, customer solution required.) Lubrication Nipple Short Stroke: Pay attention to the length of socket and switch! 1 Mechanical Switch (technical data) Repeatability Permissible Ambient Temperature Protection Class Impact Time Isolation Nominal Voltage Constant Current Switching Capacity at 0 V, Hz Conductive Resistance in New Condition Connection Contact System Switching System ± 0.05 mm 5 C to +80 C DIN IP 67 < ms Group C per VDE V AC 5 A cosϕ = 0.8 at A < 40 mω Screw connection Single pole relay Spring System Mechanical Switch with Accesories Ł Inductive Switch (technical data) Inductive switch with potted cable (3 x 0.14 mm Unitronic), Housing Type Minisensor Operating Voltage Residual Waveform Load No-Load Current Switching Frequency Temperature Shift of Switching Point Waveform Steepness of Output Signal Repeatability of the Switching Point per EN Cable Length NO Form A DIN V DC 10 % 00 ma 0 ma max Hz 4 µm/k 1V/µs 0.1 mm 3 m (10 m by request) Inductive Switch with Accessories

39 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 39 Switch Mounting Example Ø PG Socket and Switch Attach the socket on the side with the majority of the switches. Sockets and plugs have 16 pins. Sockets and switches are not wired. This allows optimal assignment of the switch positions during set-up. One plug is included. The plug can be installed in three directions pin Plug Cable Duct Attaches to the side T-slots of the main body. The cable duct can hold up to two cables for mechanical switches and three cables for inductive switches. Mounting screws and cable ties included Ordering Switches and Accessories Pos. 1 Socket / Plug Mechanical Switch and Mount Mechanical Switch ONLY 3 Inductive Switch - Switch mount WITHOUT Switch - PNP NC - PNP NO 4 Switching Cam 5 Cable Duct Refer to the table below for part numbers. Accessories can also be ordered separately. Part Numbers for Installation on CKR 5-00 Version with Mechanical and Inductive Switches* R R R R R R R R01JDUCTL *) Switch brackets for installation on Connection Plates only. For other applications, customer solution required.

40 40 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Servo Motors Type MKD (Drawings not to scale.) MKD 5B-144 KG1 MKD 41B-144 KG Ø40j6 Ø9k6 Ø63 Ø50 j6 Ø14 k6 Ø Ø Ø MKD 71B-061 KG1 MKD 90B-047 KG Ø95 j6 Ø19 k6 Ø130 Ø110 j6 Ø4 k6 Ø Ø Ø Motor Data for Servo Motors Type MKD Motor Maximum Effective Speed RPM n max (min -1 ) Nominal Torque M N (Nm) Maximum Torque M max (Nm) Mass Moment of Inertia J M + J Br (10-6 kgm ) Braking Torque M Br (Nm) Mass with Brake m Br (kg) MKD 5B-144 KG1 MKD 41B-144 KG1 MKD 71B-061 KG1 MKD 90B-047 KG ,

41 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 41 Type MSM (Drawings not to scale.) MSM 030C-0300-NN-M0-CG1 with Brake MSM 030C-0300-NN-M0-CG0 without Brake MSM 040B-0300-NN-M0-CG1 with Brake MSM 040B-0300-NN-M0-CG0 without Brake Ø Ø90 Ø50 h7 Ø14 h6 Ø70 h7 Ø19 h ) ) Ø Ø ) ) 1) With Brake ) Without Brake Motor Data Servo Motors Type MSM Motor Maximum Effective Speed RPM n max (min -1 ) Nominal Torque M N (Nm) Maximum Torque M max (Nm) Mass Moment of Inertia J M + J Br (10-6 kgm ) Braking Torque M Br (Nm) Mass with Brake m Br (kg) MSM 030 C MSM 040 B with Absolute Encoder with Absolute Encoder Without Brake With Brake Without Brake With Brake NOTE: Motors are available complete with controls.

42 4 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Lubrication Access Ports The Compact Module with toothed belt drive is designed for single-point grease lubrication via one of three access ports. Connection dimensions for short carriage Drive end Center of Carriage X ØY Central Lubrication: a) Carriage: each unit is shipped with a set-screw sealing the access port (size 1-90: M4, size 5-00: M8) Note connection geometry for customer fixture when using central lubrication port in carriage. b) Through side ports ØY; funnelshaped grease nipple per DIN 3405-AM6 (size 1-90 per DIN 3405-D4, size 5-00 DIN AM8x1) When using the ports in the carriage, the set-screw must be removed and an O-ring must be installed as a seal. Center of Main Body b) a) ØY b) Central lubrication ports for grease Size X Y CKR 1-90 CKR CKR CKR For short stroke versions, please contact Bosch Rexroth for lubrication information: CKR 1-90: Stroke < 40 mm CKR : Stroke < 50 mm CKR 0-145: Stroke < 60 mm CKR 5-00: Stroke < 80 mm Connection dimensions for long carriage Drive end b) a) b) ØY Center of Main Body ØY Central lubrication ports for grease

43 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 43 Size A ± 0.1 B C -0. CKR 1-90 CKR CKR CKR Customer-supplied Fixture ØA ØB O-Ring DIN 3771: Size 1-90: Ø4 x.5 Part Number: Size and 0-145: Ø5 x Part Number: Size 5-00: Ø8 x Part Number: C Carriage O-Ring Main Body

44 44 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Installation Overview of Mounting and Installation Options Installation of a customer-supplied fixture to the Compact Module using a connection plate Installation of a Compact Module using a connection plate and clamps Installation of a EC* Automation System from BRP* to a Compact Module using a connection plate (Example: Mini-sled MSC) Clamps Installation on Carriage Compact Module CKR or CKK Connection Plate Installation of the Compact Module on the customer's support structure using clamps Installation on Main Body Installation of the Compact Module using a connection plate and clamps Installation of the Compact Module on the MGE Aluminum Structural Framing system using a connection plate and clamps * EC: Easy--Combine BRP: Bosch Rexroth Pneumatics

45 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 45 Installation Note: The Compact Module is installed using clamps. Installation using clamps Do not secure or support the Compact Module by the drive/idler end blocks! The weight-bearing structure is the main body! When installing Compact Modules, please note the maximum tightening torques listed in the table. Size CKR 1-90 CKR CKR CKR 5-00 A B A ±0.1 B For size 5-00, alternative installation is possible using T-blocks. Installation using T-blocks (CKR 5-00) 150 ±0.1 Size CKR 1-90 CKR CKR CKR 5-00 A B C * * * * Through-threading/-hole Alternative installation using special machining in the bottom surface of the main body max. C Spacing from the ends of the main body = min. 30 mm. B Dowel hole or threaded hole, max. ØB A

46 46 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Attachment Clamps Clamps Recommended number of clamps: Type 1: 6 pieces per Meter and Side Type : 4 pieces per Meter and Side Type 3: 3 pieces per Meter and Side H G F E D Countersink for thread M ISO 476 quantity N A B C C C A B C A Type 1 Type Type 3 Compact Module CKR 1-90 CKR CKR CKR 5-00 for Thread M4 M5 M6 M8 Clamp Type Quantity Dimension Holes N A B C D E F G H , , ,5 30 4, , , , , , , , , , , , , Part Number R R R R R R R R R R R R R R R

47 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 47 T-Blocks and Bars (CKR 5-00) For attaching the main body and fixtures to the connection plate. T-Blocks 10 Bar 5 M (10.5) M8 (18x) x 60 = Recommended quantity of T-blocks: with one threaded hole, 6 pieces per meter and side Part Number R Part Number R Spring (CKR 5-00) The spring assists in positioning and installing T-blocks. Part Number R Tightening Torques for Fastening Screws at Friction Class 0.15 Hardness Class M4 M5 M6 M8 Nm

48 48 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Connection Elements Connection Plate with Central Lubrication Ports Function: Attachment of fixtures (with T-blocks) Lubrication Ports on four sides (central lubrication connection required at only one of the four ports) Funnel-shaped Grease Nipple DIN 3405 see table Assembly includes: Connection Plate, Assembly hardware for attachment to carriages. T-Blocks are not included. Connection plates can be used with long carriages only! Module with long carriage Funnel Grease Nipple per DIN 3405 Size sides back CKR 1-90 D4 AM6 CKR D4 AM6 CKR AM6 AM8x1 CKR 5-00 AM8x1 AM8x1 X Connection Plate C A D D D F 3 F 3 ø G ø Usable Depth: H 1 for insertion of fixtures ø G ø 0.0 Usable Depth: H for insertion of fixtures B X ø G ø Usable Depth: H 3 for insertion of fixtures F 1 F E 1 E Connection dimensions for switch bracket (CKR 5-00) M4 x 6 deep E 4 E Size CKR 1-90 CKR CKR CKR 5-00 Connection Plate Part Number Dimensions Mass Assembly A B C D E 1 E E 3 E 4 F 1 F F 3 G H7 1 G H7 G H7 3 H 1 H H 3 kg R R R R

49 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 49 Centering Ring The centering ring assists with positioning and serves as a sealing element for customer fixtures on the connection plate. Centering Ring Seal Part Dim. CKR 1-90 CKR CKR CKR 5-00 Number D H7 H 1 H +0. R R R R H 1 H Ø D T-Blocks For attaching fixtures to the connection plate. D A Springs Spring assist in positioning and assembly. M B E C Compact Module CKR 1-90 CKR CKR CKR 5-00 for Thread M4 M5 M4 M5 M6 M8 M4 M5 M6 M8 T-Block and Spring Dimension A B C D E Part Number T-Block R R R R R R R R R R Part Number Spring R R R Tightening Torque of Fastening Screws At friction factor 0.15 Hardness class M4 M5 M6 M8 Nm

50 50 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Connection Elements Overview Connection elements are used for the simplified assembly of multi-axis units (X-Y-Axis, X-Z-Axis). The connection system is designed to allow the connection of Compact Modules with the same size or the next smaller size. Connection elements are sold as assemblies with all individual parts (cross-connection plate, clamps, screws, pins, and connection brackets upon request) necessary to connect a two-axis system. Connecting Compact Modules with a Cross-Connection Plate Axis X-Y Y-Axis X-Axis Y-Axis is fastened to the main body (carriage travels in Y-Axis)

51 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 51 Connecting Compact Modules with Cross-Connector Plates (X-Y-Axis) Y-Axis is fastened to the main body (carriage travels in the Y-axis) A = Width of Cross-Connector Plate B = Length of Cross-Connector Plate C = Height of Cross-Connector Plate X-Axis Version: Compact Module with long carriage Y-Axis Version: Compact Module with long or short carriage. Carriage travels. Part Numbers for Cross-Connector Plate Assembly with Central Lubrication (includes cross-connector plate, clamps, screws, pins; does NOT include centering rings) X-Axis Long carriage CKR 1 90 CKR CKR CKR 5 00 CKR 1 90 CKK 1 90 R R R R Part numbers for Cross Connector Plate Assembly with Central Lubrication Y-Axis 1 or carriages (CKK)/long or short carriage (CKR) CKR CKR CKK CKK R R R R R CKR 5 00 CKK 5 00 R Part Number of Dimension Assembly A B C R R R R R R R R Mass (kg)

52 5 Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE (03.006) Documentation Standard Report Option 01 The standard report serves as confirmation that the listed inspection items have been checked and that the measured values fall within the permitted tolerance range. Inspection items included in the standard report: Functional test of mechanical components Functional test of electrical components Unit matches order confirmation Frictional Torque Measurements for the Complete System Option 0 The frictional torque is measured along the entire travel path. M (Nm) Forward Reverse t (ms) M (Nm)

53 RE (03.006) CKR Linear Motion and Assembly Technologies Bosch Rexroth Corp. 53 Positioning Accuracy per VDI/DGQ 3441 Option 05 Measurement points are selected at irregular intervals along the travel path. These points allow the capture of periodic positioning deviations. Each measurement point is approached several times, from both directions. From this, the following values can be calculated: Deviation (µm) Example P Pa PS/ U PS/ Measurement path Positioning Accuracy P The positioning accuracy is determined by the total deviation. It includes all systematic and random deviations in positioning. The positioning accuracy takes the following values into consideration: Postion deviation Reversal range Variation range Position Deviation Pa The position deviation is determined by the maximum occurring difference between the mean values of all measurement points. It describes systematic deviations. Reversal Range U The reversal range is determined by the difference in the mean values from both directions of approach. The reversal range is calculated at each measurement point. It describes systematic deviations. Variation Range PS The variation range shows the effects of random deviations. It is calculated at each measurement point.

Precision Modules PSK

Precision Modules PSK Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum

More information

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings

More information

Precision Modules PSK

Precision Modules PSK Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module

More information

Product Description. Characteristic features R310A 2402 ( ) Linear Modules MLR

Product Description. Characteristic features R310A 2402 ( ) Linear Modules MLR 9 Bosch Rexroth Corporation R310A 40 (1.11) MLR Product Description Characteristic features MLR...: with Cam Roller Guide and Toothed Belt Drive for high-speed applications (up to 10 m/s) with Cam Roller

More information

Miniature Linear Modules MKK/MKR The Drive & Control Company

Miniature Linear Modules MKK/MKR The Drive & Control Company Miniature Linear Modules MKK/MKR 12-40 The Drive & Control Company 2 Miniature Linear Modules R310A 2418 (2009.05) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings

More information

Compact Modules CKK/CKR 9-70

Compact Modules CKK/CKR 9-70 Compact Modules CKK/CKR 9-70 (with Ball Rail System, Ball Screw Drive or Toothed Belt Drive) R310EN 2624 (2008.10) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball

More information

Precision Modules PSK. The Drive & Control Company

Precision Modules PSK. The Drive & Control Company Precision Modules PSK The Drive & Control Company 2 Bosch Rexroth Coporation Precision Modules PSK R310A 2414 (2008.07) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear

More information

Product overview. 10 Bosch Rexroth Corporation Compact Modules R310A 2602 ( ) Compact Modules CKK. Compact Modules with ball screw drive (CKK)

Product overview. 10 Bosch Rexroth Corporation Compact Modules R310A 2602 ( ) Compact Modules CKK. Compact Modules with ball screw drive (CKK) 10 Bosch Rexroth Corporation R310A 2602 (2008.09) CKK with ball screw drive (CKK) Product overview are precision, ready-to-install linear motion systems characterized by their high performance and compact

More information

Compact Modules CKK/CKR 9-70

Compact Modules CKK/CKR 9-70 Compact Modules CKK/CKR 9-70 with Ball Screw Drive and Toothed Belt Drive The Drive & Control Company 2 Compact Modules CKK/CKR 9-70 R310A 2624 (2009.05) Linear Motion and Assembly Technologies Ball Rail

More information

STAR Ball Rail Tables TKK

STAR Ball Rail Tables TKK before operating X4 X8 X3 X1 X2 S1 S2 12 4 13 5 14 6 15 7 16 8 1 2 3 9 10 11 1 2 3 4 5 6 8.8 S3 X30 Indramat DANGER! AC-CONTROLLER High voltage Danger of electrical shock Do not touch electrical connnections

More information

Rexroth Linear Motion Technology

Rexroth Linear Motion Technology Linear Modules Robotic Erector System for Linear Modules RE 82 402/2003-10 The Drive & Control Company 1 RE 82 402/2003-10 Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard

More information

Ball Rail Systems RE / The Drive & Control Company

Ball Rail Systems RE / The Drive & Control Company Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems

More information

Miniature Ball Rail Systems

Miniature Ball Rail Systems R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail

More information

Omega Modules OBB R310EN 2407 ( )N. The Drive & Control Company

Omega Modules OBB R310EN 2407 ( )N. The Drive & Control Company Omega Modules OBB R310EN 2407 (2011-09)N The Drive & Control Company The ideal system solution for the ideal application EasyHandling Basic Comfort Advanced Mechanical and pneumatic components, grippers,

More information

Linear Motion Technology Handbook. The Drive & Control Company

Linear Motion Technology Handbook. The Drive & Control Company Linear Motion Technology Handbook The Drive & Control Company 1-2 Bosch Rexroth AG Linear Motion Technology Handbook R310EN 2017 (2006.07) Linear Motion and Assembly Technologies www.boschrexroth.com/brl

More information

camoline Cartesian Motion Building System R310EN 2605 ( )

camoline Cartesian Motion Building System R310EN 2605 ( ) camoline Cartesian Motion Building System R310EN 2605 (2009.08) The Drive & Control Company Modularity for best effectiveness Efficient Handling Solutions more than just a system Bosch Rexroth AG 2 Our

More information

R310EN 2211 ( ) The Drive & Control Company

R310EN 2211 ( ) The Drive & Control Company eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball

More information

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 01_1 Miniature st Headline_36 Ball Rail pt/14.4 Systems mm second line 2 Linear Motion and Assembly Technologies Miniature Ball Rail Systems Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts

More information

V SWISS MADE LINEAR TECHNOLOGY

V SWISS MADE LINEAR TECHNOLOGY Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile

More information

Electromechanical Cylinder EMC

Electromechanical Cylinder EMC Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems

More information

Electric Mini Slides MSC-EL

Electric Mini Slides MSC-EL Electric Mini Slides MSC-EL R10EN 2604 (11.08) The Drive & Control Company Electric Mini Slides, MSC-EL R10EN 2604 (11.08) Mini Slides, MSC-EL Product Description 4 Selection Guide 6 Maximum thrust 6

More information

Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD

Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17

More information

Ball Screw Assemblies eline. The Drive & Control Company

Ball Screw Assemblies eline. The Drive & Control Company Ball Screw Assemblies eline The Drive & Control Company 2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies eline BSA R310A 3314 (2005.04) Linear Motion Technology Ball Rail Systems Standard

More information

Linear Actuator with Toothed Belt Series OSP-E..B

Linear Actuator with Toothed Belt Series OSP-E..B Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7

More information

Cam roller guide LF6S complete axis

Cam roller guide LF6S complete axis Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto

More information

LINEAR UNITS CT & MT

LINEAR UNITS CT & MT LINEAR UNITS CT & MT Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right

More information

Introduction. Stainless Steel Cover. Removable Carriage Plate. Mounting Platform. Limit Switch & Bracket. Aluminum Beam.

Introduction. Stainless Steel Cover. Removable Carriage Plate. Mounting Platform. Limit Switch & Bracket. Aluminum Beam. Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load capacity that system life is rarely

More information

Flexible. Light. Productive. LEG Long-stroke Gripper

Flexible. Light. Productive. LEG Long-stroke Gripper LEG Flexible. Light. Productive. LEG Long-stroke Gripper Light long-stroke gripper for flexible and highly dynamic handling of various components Field of Application For use in a clean working environment,

More information

Linear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46

Linear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46 Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS

More information

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Overview...25-28 Technical Data...29-31 Dimensions...32-33 25 Features TOOTHED BELT DRIVE FOR VERTICAL MOVEMENTS

More information

Берг АБ Тел. (495) , факс (495)

Берг АБ Тел. (495) , факс (495) AUTOMATION Linear- and Rotary Modules Table of Contents 1 Product Overview............................................. 4 1.1 Selection of the Linear Modules................................. 8 1.2 Selection

More information

RACK JACK. Synchronous Lifting Systems

RACK JACK. Synchronous Lifting Systems RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion

More information

V SWISS MADE LINEAR TECHNOLOGY

V SWISS MADE LINEAR TECHNOLOGY Excerpt from main catalogue inear modules V 11-15 SWISS MDE INER TECHNOOGY ine Tech inear modules Table of contents Product overview 6 7 Design fundamentals / ubrication / Maintenance 8 Profile cross-sections

More information

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-33 Dimensions 34 Order Instructions 35

More information

EJP SERIES Right-angle Worm

EJP SERIES Right-angle Worm EJP SERIES T he EJP series is ideal for demanding applications requiring high efficiency, torsional rigidity and zero backlash. It s lightweight, black anodized aluminum housing and dual input/output seals

More information

WIESEL SPEEDLine WHZ80 with roller guideway and AT toothed belt

WIESEL SPEEDLine WHZ80 with roller guideway and AT toothed belt WIESEL WHZ80 with roller guideway and AT toothed belt All figures shown in millimeters. Note: Mounted wipers on request. The use of a long power bridge increases the total length. Technical data Linear

More information

Sizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories

Sizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories > Series 5E electromechanical axis C_Electrics > 207 Series 5E electromechanical axis New models Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high

More information

R310EN 2302 ( ) The Drive & Control Company

R310EN 2302 ( ) The Drive & Control Company R31EN 232 (26.4) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical

More information

EMC-HD. C 01_2 Subheadline_15pt/7.2mm

EMC-HD. C 01_2 Subheadline_15pt/7.2mm C Electromechanical 01_1 Headline_36pt/14.4mm Cylinder EMC-HD C 01_2 Subheadline_15pt/7.2mm 2 Elektromechanischer Zylinder EMC-HD Short product name Example: EMC 085 HD 1 System = ElectroMechanical Cylinder

More information

Contents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...

Contents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview... SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...

More information

Technical Data, Dimensioning, Mounting

Technical Data, Dimensioning, Mounting 6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load

More information

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-31 Dimensions 32-33 25 Parker Hannifin Corporation

More information

RACK JACK. Synchronous Lifting Systems

RACK JACK. Synchronous Lifting Systems RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion

More information

Highest Performance: SPH Series

Highest Performance: SPH Series Highest Performance: Series The series features helical gearing which brings a whole new level of power and precision to GAM s already extensive portfolio of gear reducer technology. With special attention

More information

1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7

1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7 Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z

More information

MT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR

MT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR MT Series MTB BELT DRIVEN LINEAR ACTUATOR LINEAR ACTUATOR TECHNOLOGY The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA FEATURES

More information

Any reproduction, even partial, is allowed only by written permission by Rollco.

Any reproduction, even partial, is allowed only by written permission by Rollco. LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to

More information

Uniline System FrontespizioUnilineSystem.indd 1 22/11/ :32:41

Uniline System FrontespizioUnilineSystem.indd 1 22/11/ :32:41 Uniline ystem 1 Uniline series Uniline series Uniline series description ig. 1 Uniline is a family of ready-to-install linear actuators. They consist of internal ompact Rail roller sliders and steel-reinforced

More information

Connection technology for Linear Motion Systems 1.3

Connection technology for Linear Motion Systems 1.3 Connection technology for Linear Motion Systems 1.3 2 Connection technology for Linear Motion Systems 1.3 Connection technology for Linear Motion Systems 1.3 3 Contents 4 Combination options for -Z linear

More information

ROTARY MODULES. Rotary modules

ROTARY MODULES. Rotary modules Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186

More information

eline Profiled Rail Systems

eline Profiled Rail Systems eline Profiled Rail Systems with Ball and Cam Roller Runner Blocks R310EN 2211 (2008.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail

More information

124

124 124 www.danahermotion.com Linear Units Linear Rod Units VarioLine, Movotrak Linear units with rod Perfect for hydraulics and pneumatics replacement Load up to 40 000 N High accuracy ball screw drive High

More information

High Performance: EPL Series

High Performance: EPL Series High Performance: EPL Series GAM can. If you don t see exactly what you need, let us know. We can modify the EPL Series gearboxes to meet your needs. Page 4 provides a list of commonly requested modifications

More information

Highest Precision: SPL Series

Highest Precision: SPL Series Highest Precision: SPL Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the SPL Series gearboxes to meet your needs. Page 3 provides a list of commonly requested

More information

Linear Drive with Ball Screw Drive Series OSP-E..SB

Linear Drive with Ball Screw Drive Series OSP-E..SB Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions

More information

mechanics LES functional overview LES 4 LES 6 LES 5

mechanics LES functional overview LES 4 LES 6 LES 5 LES functional overview LES 4 Overview B-36 B-38 with spindle drive LES 6 B-40 with spindle drive LES 5 B-42 with spindle drive Combination examples Motor modules Clutch housing Motor leads Installation

More information

ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS

ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES 1 ELECTRIC AXIS - RODLESS ELEKTRO SK SERIES Electric axis without screw piston rod, with V-Lock interface. The cylinder frame is made of anodized extruded

More information

SPH Series GAM CAN, JUST ASK!

SPH Series GAM CAN, JUST ASK! SPH Series GAM CAN, JUST ASK! - Highest Precision Class The SPH is GAM s latest solution for today s demanding motion control challenges. Available in six frame sizes and nominal torque ratings ranging

More information

SRU-mini. Application example. Pneumatic Rotary Actuators Universal Rotary Actuators. Weight 0.15 kg 0.65 kg. Torque 0.16 Nm 1.

SRU-mini. Application example. Pneumatic Rotary Actuators Universal Rotary Actuators.  Weight 0.15 kg 0.65 kg. Torque 0.16 Nm 1. SRU-mini Sizes 8 14 Weight 0.15 kg 0.65 kg Torque 0.16 Nm 1.15 Nm Axial force 255 N 330 N Bending moment 2.5 Nm 4.5 Nm Application example Reversing unit for the economical reorientation of cylindrical

More information

Linear Axes Technical Data Summary

Linear Axes Technical Data Summary components Technical Data Summary Pneumatic Axes Electrical Axes LM 6 P LM 8 P LM 8 PV LM 10 P LM 6 PE LM 8 PE LM 8 PEV LM 10 PE Standard stroke lengths [mm]: h 0-150 Overall length [mm]: L 408 468 468

More information

Ball rail actuator/guide - RK DuoLine Z/R

Ball rail actuator/guide - RK DuoLine Z/R Ball rail actuator/guide - RK DuoLine Z/R All-round talent with protected guide system Fixing slots in the guide profile and carriage 9Simple 9 connection of accessories 9Excellent 9 fixing options for

More information

Linear Bushings and Shafts. The Drive & Control Company

Linear Bushings and Shafts. The Drive & Control Company Linear Bushings and s The Drive & Control Company 2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Linear Bushings R310A 3100 Linear Motion Technology Ball Rail Systems Standard Ball Rail

More information

MTB 42 Belt Driven Linear Actuator

MTB 42 Belt Driven Linear Actuator LINEAR ACTUATOR TECHNOLOGY MT Series MTB Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features

More information

High Performance: EPR Series

High Performance: EPR Series High Performance: EPR Series GAM can. If you don t see exactly what you need, let us know. We can modify the EPR Series gearboxes to meet your needs. Page 4 provides a list of commonly requested modifications

More information

Catalogue. Portal Axes PAS

Catalogue. Portal Axes PAS Catalogue Portal xes PS Portal xes PS Table of Content Product Description............................... 2 Ballscrew axes.................................... Product description.............................

More information

Sizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories

Sizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories > Series 5E electromechanical axis C_Electrics > 206 Series 5E electromechanical axis New Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high dynamics

More information

Courtesy of Steven Engineering, Inc - (800) PATENTED

Courtesy of Steven Engineering, Inc - (800) PATENTED PRECISION RING DRIVE SYSTEMS Based on Nexen s innovative Roller Pinion technology, Nexen Ring Drive Systems come complete with a precision grade, high capacity bearing and drive mechanism in a rigid housing.

More information

LM SERIES LINEAR MODULE

LM SERIES LINEAR MODULE LM SERIES LINEAR MODULE THE LM RODLESS LINEAR ACTUATOR RACO s LM Linear Modules are lightweight positioning elements, which can be easily configured into a wide variety of multiple axis motion systems.

More information

C-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS

C-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence: about

More information

Cam roller guide LF12S complete axis

Cam roller guide LF12S complete axis Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto

More information

Roller guide actuator/guides - SQ /SQZ

Roller guide actuator/guides - SQ /SQZ Roller guide actuator/guides - SQ /SQZ Timing-belt unit with optimum connecting options due to slots in guide profile/carriage Fixing slots 9Easy 9 fixing of linear actuator 9Simple 9 connection of accessories

More information

LAP4, LAP8. Pneumatic linear drive sizes 4 and 8

LAP4, LAP8. Pneumatic linear drive sizes 4 and 8 Pneumatic linear drive sizes 4 and Torsional and bending resistant profiles T-slots in the outer profile enable individual mounting options Adjustable guiding system (LAP4) Precise linear roller guiding

More information

Technical Data and Dimensions EMC

Technical Data and Dimensions EMC Technical Data Electromechanical Cylinders EMC 5 Technical Data and Dimensions EMC Sizes 3 to 00 follow the standard cylinder series according to ISO 555. Built-in ball screw drives have a diameter of

More information

OSPE..BHD Belt-Driven Actuators

OSPE..BHD Belt-Driven Actuators OSPE..BHD Belt-Driven Actuators Actuators for High-Speed, Long Travel, Heavy Duty Applications The OSPE..BHD is the highest capacity belt-driven actuator in the OSPE family. The integrated ball bearing

More information

PNCE ELECTRIC CYLINDERS

PNCE ELECTRIC CYLINDERS ELECTRIC CYLINDERS Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to

More information

PNCE ELECTRIC CYLINDER

PNCE ELECTRIC CYLINDER ELECTRIC CYLINDER INDEX Characteristics 1 Structural design 2 How to order 3 Technical data 4 Dimensions 11 Accessories 12 Lubrication position 2 Motor adapter with coupling 2 Motor side drive with timing

More information

Roller guide actuators - SQ ZST

Roller guide actuators - SQ ZST Roller guide actuators - SQ ZST Rack and pinion with fixed carriage, also for larger travels up to 30 m RK Standard motor 9Choice 9 of motor and motor adaptor plate to suit your requirements 9 9Simple

More information

Linear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD

Linear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD inear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD Contents Description Data Sheet No. Page Overview 1.15.001E 11-14 Technical Data 1.15.002E-1 to 3 15-17 Dimensions 1.15.002E-4

More information

SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE

SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE Series RTC Rodless Cylinder Pneumatic automation building block Series RTC (Rodless Thrust Cylinder)-High performance shuttle type rodless cylinders

More information

Portal modules.

Portal modules. Portal modules www.comoso.com www.comoso.com Portal modules PORTAL MODULES Series Size Page Portal modules PMP 114 PMP 16 118 PMP 25 124 EPM 130 EPM 37 138 EPM 48 146 The SCHUNK program offers linear technology

More information

C 01_1 Headline_36pt/14.4mm

C 01_1 Headline_36pt/14.4mm Compact Modules C 01_1 Headline_36pt/14.4mm Catalog addition: Lubrication / Cover Resist C 01_2 Subheadline_15pt/7.2mm 2 Compact Modules - catalog addition Identification system for short product names

More information

Mini-MAG Positioning Products

Mini-MAG Positioning Products Mini-MAG Positioning Products Miniature Linear Stage The Mini-MAG (MMX) line of miniature linear stages blends the ultimate in performance, reliability, and value, delivering nearly twice the accuracy

More information

ORIGA Pneumatic Linear Drives OSP-L

ORIGA Pneumatic Linear Drives OSP-L ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.

More information

mechanics RDH-M Indexing table / Rotary unit 2-96 RDH-S Indexing table / Rotary unit 2-98 RDH-XS Indexing table / Rotary unit 2-100

mechanics RDH-M Indexing table / Rotary unit 2-96 RDH-S Indexing table / Rotary unit 2-98 RDH-XS Indexing table / Rotary unit 2-100 Overview RDH-M Indexing table / Rotary unit 2-96 RDH-S Indexing table / Rotary unit 2-98 RDH-XS Indexing table / Rotary unit 2-100 DSH-S Rotary tilting unit 2-102 RF 1 Indexing table 2-104 2-94 Overview

More information

GAM New Products 2018

GAM New Products 2018 GAM New Products 218 GPL ROBOTIC PLANETARY GCL ROBOTIC CYCLOIDAL EPR RIGHT ANGLE BEVEL PLANETARY VP PRECISION PLUS SPIRAL BEVEL GAM Can. GAM Company Overview About GAM Founded in 199 by Gary A. Michalek,

More information

PRODUCT OVERVIEW HIGHEST PRECISION

PRODUCT OVERVIEW HIGHEST PRECISION PRODUCT OVERVIEW If you need high precision gear reducers at a reasonable cost and you value innovation and excellent service, take a close look at our product line. You ll find a wide range of products

More information

Positioning Systems Linear Motor Systems

Positioning Systems Linear Motor Systems www.hiwin.de Positioning Systems Linear Motor Systems HIWIN GmbH Brücklesbünd 2 D-77654 Offenburg Phone +49 (0) 7 81 9 32 78-0 Fax +49 (0) 7 81 9 32 78-90 info@hiwin.de www.hiwin.de All rights reserved.

More information

Highest Performance: Dyna Series

Highest Performance: Dyna Series Highest Performance: Dyna Series The Dyna Series is our highest performance right-angle gear reducer utilizing sophisticated hypoid gearing. The benefit of hypoid gearing is that it combines the space

More information

NEW LM Actuator. US Only. Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure

NEW LM Actuator. US Only. Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure NEW LM Actuator Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure TY US Only CATALOG No.352E Structure of Model TY This belt drive

More information

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL)

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL) LL RE-CIRCULATING BALL BEARING (SERIES LL) Patented re-circulating ball bearing guide system. Excellent price / performance ratio. Several T-nut mounting options. Optional mounting accessory kits are available.

More information

HepcoMotion. SBD Sealed Belt Drive

HepcoMotion. SBD Sealed Belt Drive HepcoMotion SBD Sealed Belt Drive Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load

More information

Profi le rail guides LLR

Profi le rail guides LLR Profi le rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout

More information

mechanics Rotational units made by isel Torquemotor ird B-90 RDH-M RDH-S RDH-XS DSH-S RF 1 Rotary tilting unit Indexing table B-88 B-92 B-94 B-96 B-98

mechanics Rotational units made by isel Torquemotor ird B-90 RDH-M RDH-S RDH-XS DSH-S RF 1 Rotary tilting unit Indexing table B-88 B-92 B-94 B-96 B-98 Overview Torquemotor ird B-90 RDH-M Indexing table / Rotary unit B-92 RDH-S Indexing table / Rotary unit B-94 RDH-XS Indexing table / Rotary unit B-96 DSH-S Rotary tilting unit B-98 RF 1 Indexing table

More information

UNILINE www.motiontech.com.au bout Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon

More information

RE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles

RE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles RE 2 970/.99 STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles STAR Tolerance Rings Product Overview Tolerance rings are made of hard, embossed spring steel strip and belong to the class

More information

Low backlash planetary gearheads Economy

Low backlash planetary gearheads Economy Low backlash planetary gearheads Economy LP + Innovation sets standards The low-backlash LP + planetary gearhead extends and completes the product portfolio. Up to 75% higher torques oise level halved

More information

Index INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL

Index INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL LINEAR UNIT RHL Svanemærket tryksag 541-713 INDEX Index Product overview... 4 Technical data... 5 RHL... 6 Sliders for RHL: V1, V25 & V5... 7 RHL11... 8 Sliders for RHL11: V2 & V5... 9 Mounting Plates...

More information

eline Ball Screw Assemblies

eline Ball Screw Assemblies eline Ball Screw Assemblies R310EN 3314 (2005.06) The Drive & Control Company R310EN 3314 (2005.06) Bosch Rexroth AG 3 Product Overview 4 Technical Data 6 with Screw-in Single Nut ZEV-E-S Single fixed

More information

For new perspectives. WPLE - line WPLE

For new perspectives. WPLE - line WPLE 54 - line For new perspectives The is the logical refinement of our PLE series. This bevel gearbox series was designed especially for space-saving installation in a right-angle position of the motor/gearbox

More information

GSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping

GSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without

More information