1. Axial Piston Pumps
|
|
|
- Arleen Norris
- 5 years ago
- Views:
Transcription
1 xial iston umps 1. xial iston umps Series Model Maximum Operating ressure Maximum Displacement emarks age S n 3 /rev & M & remier Worldcup oldcup , M , W W W hreaded rear ports. : ndustrial M : Mobile (high speed) Open loop. Side ports, SE 4 bolts. Optional rear drive. : ndustrial : Mobile (high speed) Open loop. Metric dimensions. Optional rear drive (full torque capability). Open loop. Optional rear drive. ransmission pumps. ntegrated package. Optional rear drive (full torque capability). Other versions 2 available Higher speed capability : consult Denison Hydraulics. 2 Open loop (6, 7, 11, 14) : consult Denison Hydraulics. Fixed displacement (6F, 7F, 8F) : consult Denison Hydraulics. 1-1 DENSON HYDULCS - ef. : 01 - US-001-E1.doc.
2 xial iston umps - roduct ange Overview Series Displacement (in 3 /rev) remier W 6.00 Worldcup 7W W 8.00 Series oldcup DENSON HYDULCS - ef. : 01 - US-001-E1.doc.
3 xial iston umps - erformance & Operation Limits Size Maximum ressure 1 Maximum ntermittent Continuous Case speed 2 Weight S S S rpm lbs. Mounting age SE- - 2 bolts SE-B - 2 bolts SE-B - 2 bolts SE-C - 2 bolts SE-C - 2 bolts SE- - 2 bolts SE-B - 2 bolts SE-B - 2 bolts SE-C - 2 bolts SE-C - 2 bolts SE-C - 4 bolts SE-C - 4 bolts SE-D - 4 bolts SE-D - 4 bolts SE-D - 4 bolts SE-D - 4 bolts SE-E - 4 bolts SE-E - 4 bolts W SE-D - 4 bolts 7W SE-D - 4 bolts W SE-D - 4 bolts Size S S S rpm Lbs. Mounting age SE-C - 2 bolts, SE-D - 4 bolts SE-C - 2 bolts, SE-D - 4 bolts SE-C - 2 bolts, SE-D - 4 bolts SE-E - 4 bolts SE-E - 4 bolts SE-F - 4 bolts SE-F - 4 bolts For use with mineral oil. Other fluids, consult Denison Hydraulics. 2 t atmospheric inlet pressure (15 S absolute). For higher speed operation, consult Denison Hydraulics. 3 M20, 20 : 2600 rpm. 1-3 DENSON HYDULCS - ef. : 01 - US-001-E1.doc.
4 xial iston umps - oldcup Series C Series - HS umps in 3 /rev, 6000 S in 3 /rev, 6000 S in 3 /rev, 6000 S in 3 /rev, 6000 S in 3 /rev, 4500 S in 3 /rev, 4500 S in 3 /rev, 4500 S Key Sheet... Example : 24-21E B E B0... Series Displacement (in 3 /rev) E B0... Control 24-21E B0...Control Options Series Displacement indicator orque Limiter 4 Basic unit Cam position otentiometer 6 feedback D (C / DC) 7 / 8 Basic ear drive Shuttle valve 6L 7L 8L 11L 14L 24L 30L E B0... Control pump side ear aux. pump 6S 7S 8S 11S 14S 24S 30S Control : port side / port B side / B Open loop version E B0...Control Feature Fixed displacement 6F 7F 8F E B0... Servo & eplenish E B0...Shaft Mechanical Seal Double Lip Seal Series SE S L Key Spline Key Spline 6/7/8 C D /14 E /30 F E B0...otation CW CCW E B0... Seal Class Buna N : mineral oil 1 iton : mineral oil & fire resistant fluid E B0... Design L Series Code emark Servo eplenishing 6, 7, in 3 /rev. ncluded 11, in 3 /rev in 3 /rev. S in pump 24, in 3 /rev.. L X o be supplied externally E B0...ear Drive ear drive None SE orque (in.lbs) 6 0 B / L - B C S B / L - B C D E S B C 2700 / L - B C D E F S - B E B0...Optional rear pump. L 0 S (rear auxiliary pump included) DENSON HYDULCS - ef. : 01 - US-001-E1.doc.
5 xial iston umps - oldcup Series - Control Options llowable controls & options combinations...(24-21e b1) 1 : Screw djustment Displ. : 100% 2 : Cylinder Control Displ. : 100% 4 : otary Servo Displ. : 100% Compensator response time, off stroke : 6, 7, ms 11, ms 19 o Displ. : 30% 6.3 o - 19 o -19 o 19 o Displ.: -100% 24, ms ump held to maximum set displacement. Manual override with rotary servo shaft. ilot pressure in control Y port for maximum displacement. ilot pressure in control X port for minimum displacement. Manual servo control, spring centered. On stroke response time : 6, 7, sec. 11, sec. 24, sec. None Maximum volume stop utomatic brake control - - 4B +B options - - 4C 3 positions spring centering - 2H - Electric 4D01, 2 positions - 2M - Electric 4D01, 3 positions - 2N - 7 : Servo valve Displ.: 100% 8 : Hydraulic stroker Displ.: 100% 9 : Electro-hydraulic stroker Displ.: 100% Compensator response time, off stroke : 6, 7, ms 11, ms 24, ms Hi- fast response time control (4DC01 valve). On stroke response time : 6, 7, ms 11, ms 24, ms Driver card : ower supply : Card holder : ump stroke according to pilot pressure. Spring centered. ecommended valve : ump stroke according to electric current. Spring centered. On stroke response time : 6, 7, sec. 11, sec. 24, sec. Driver card :... S Option card :... S ower supply :... S Card holder : Max. volume stop Max. ol. Stop + brake control - 8C 9C Cam feed back D D + man. override 7L2 - - otent otent. + man. override 7K2 - - Control Features... (24-21E B1) Code -10 m 10 m Displ.: -100% Controls Displ.: 30% 6.3 o - 19 o -325 m -180 m 180 m 325 m Displ.: -100% 1 2M / 2N 2 / 2H Standard 110C / 60 Hz, DN connector Standard Standard No manual override S 24 DC DC, DN connector - - With manual override S 12 DC C / 50 Hz, DN connector S C / 60 Hz, Wiring Box S DC, Wiring Box S No valve DC, DN connector C / 50 Hz, DN connector DENSON HYDULCS - ef. : 01 - US-001-E1.doc.
6 xial iston umps - oldcup Series - 6 / 7 / 8 - Dimensions (in) SE-C 2-bolts * * Shaft end view M N O S W 5.27 Y * SE-D 4-bolts * : rear-end view * M N O S W 5.27 Y 4.22 */L : rear-end view Shafts Keyed : SE-C Keyed : SE-D Splined : SE-C Splined : SE-D 1 Code orque limits (in-lbs.) 2, 7 4 3, 8 5 L L Dimensions DMEE K1 x K2 H x x Class 1-J498b, 12/24 d.p teeth Class 1-J498b, 8/16 d.p teeth 6/7/8L dimensions : consult Denison Hydraulics DENSON HYDULCS - ef. : 01 - US-001-E1.doc.
7 xial iston umps - oldcup Series - 6 / 7 / 8 Hydraulic Schematic D1 D2 L FB Control F H o be plugged if external filter (H K) B K 2 2 Shuttle alve : L B D3 K C B Full capacity rear drive No internal pump : L B orts ump type Dimensions (in) L 1 B1 Ø E F Main lines, B : SE-62, 1½ / 8-11UNC x 1.38 uxiliary ump inlet port C SE - 16 uxiliary pump outlet (external filtration) SE - 8 External replenishing inlet K SE - 16 External servo & replenishing flow inlet H SE - 4 Drain ports D1, D2 SE - 12 Shuttle valve drain port D3 ent ports,,b SE - 4 auge ports,b,d,k SE DENSON HYDULCS - ef. : 01 - US-001-E1.doc.
8 xial iston umps - oldcup Series - 11 / 14 - Dimensions (in) * * Shaft end view M N O S/U W 5.82 Y 5.83 * *, rear view *, rear view M N * O S/U W 5.82 Y Dimensions Code orque limits (in-lbs.) L1 L2 Diameter K1 x K2 H1 Keyed : SE-E 2, x Splined : SE-E 3, Shafts 1-20 Class 1-J498b, 8/16 d.p teeth DENSON HYDULCS - ef. : 01 - US-001-E1.doc.
9 xial iston umps - oldcup Series - 11 / 14 Schematic D1 D2 o be plugged if external filter (J K) FB F L S Control 2 J B K 2 2 B K Shuttle alve : L D3 C B Full capacity rear drive No internal pump : L B orts ump type Dimensions (in) L 1 B1 Ø E F Main lines, B : SE-62, 1½ / 8-11UNC x 1.38 uxiliary servo & replenishing pump inlet port C SE - 20 uxiliary servo pump outlet (external filter) SE - 4 uxiliary replenishing pump outlet (external filter) J SE - 10 External replenishing inlet K SE - 16 External servo & replenishing flow inlet 2 SE - 8 Drain ports D1 & D2 SE - 16 Shuttle valve drain port D3 SE - 16 ent ports,,b SE DENSON HYDULCS - ef. : 01 - US-001-E1.doc.
10 xial iston umps - oldcup Series - 24 / 30 - Dimensions (in) * M1) N1) * O1) Shaft end view S 9.75 U * *, rear view *, rear view M1) O1) S * 1) 9.75 U Dimensions Code orque limits (in-lbs.) L1 L2 DMEE K1 x K2 H1 Keyed : SE-F 2, x Splined : SE-F 3, Shafts Class 1-J498b, 8/16 d.p teeth Upper value : 24 - Lower value : DENSON HYDULCS - ef. : 01 - US-001-E1.doc.
11 xial iston umps - oldcup Series - 24 / 30 - Schematic D1 D2 L S FB Control F H o be plugged if external filter ( H) B K 2 2 B K Shuttle alve : L D3 C B Full capacity rear drive No internal pump : L B orts ump type Dimensions (in) L 1 B1 Ø E F Main lines, B : SE-62, 2" ¾ -10 UNC x 1.50 uxiliary ump inlet port C : SE-61, 2" ½ -13 UNC x 1.06 uxiliary pump outlet (external filtration) SE - 12 External replenishing inlet K SE - 32 External servo & replenishing flow inlet H SE - 12 Drain ports D1, D2 SE - 20 Shuttle valve drain port D3 SE - 16 ent ports,,b SE - 4 auge ports,b,d,k SE DENSON HYDULCS - ef. : 01 - US-001-E1.doc.
1. Axial Piston Pumps
Axial Piston Pumps 1. Axial Piston Pumps Series Model Maximum Operating Pressure Maximum Displacement Remarks Page PSI In 3 /rev PV & PVM & PVR Premier Worldcup Goldcup PV6 4500 0.88 PV10 4500 1.26 PV15
Gold Cup Hydrostatic Transmission
Gold Cup Hydrostatic Transmission The Gold Cup Hydrostatic Transmission pumps are variable displacement piston pumps of an unparalleled rugged design. Rated to 5000 PSI continuous pressure and continuous
P2060 P2075 P2105 P2145 P3105 P3145
Technical Information Technical Features P2 Series Compact design Low noise level Service friendly Reliable Long-lasting Flexible Easy to install High self-priming speed Technical Data P3 Series P2 Series
Denison GOLD CUP Product Catalog Piston Pumps & Motors For Open & Closed Circuits
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Denison GOLD CUP Product Catalog Piston Pumps & Motors For Open & Closed
Axial Piston Pump. Series PV Design 42/43 Variable Displacement
xial iston ump Design 42/43 Variable Displacement aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Contents
XCEL 45 Steering Control Units
XCEL 45 Steering Control Units Bolt-on riority Valves In-line riority Valves Flow up to 45 lpm Displacement 40-500cc Table of Contents XCEL 45 Overview...................................................3
Proportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
Eaton. Revised June, Heavy Duty Hydrostatic Transmissions. l r. Models 33 through 76 Hydrostatic Transmissions. We Manufacture.
s Eaton Revised June, 1997 c Heavy Duty Hydrostatic Transmissions h i y d l ydraulics r a u u l c a i r s y d Models 33 through 76 Hydrostatic Transmissions We Manufacture Solutions H S o l u t i o n s
Veljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
Axial piston variable motor A6VM series 71
xial piston variable motor 6VM series 71 RE 91610 Edition: 06.2014 Replaces: 04.2013 Sizes 60 to 215 Nominal pressure 450 bar Maximum pressure 500 bar Open and closed circuits Features Variable motor with
Gear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
![Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ]](/thumbs/76/74105930.jpg "Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ]")
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
Veljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
Catalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA
Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.
Axial Piston Variable Motor A6VM
Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Variable Motor 6VM RE 91610/07.09 1/80 Replaces: 03.09 Data sheet Series 71 Sizes N60 to 280
Axial Piston Variable Motor A6VM
xial Piston Variable Motor 6VM R- 91610/01.12 1/80 Data sheet Series 71 Sizes 60 to 280 Nominal pressure 6500 psi (450 bar) Maximum pressure 7250 psi (500 bar) Open and closed circuits Contents Ordering
Axial piston variable pump A11V(L)O Series 40
xial piston variable pump 11V(L)O eries 40 RE 92510 Edition: 05.2016 Replaces: 10.2014 izes 110 to 280 Nominal pressure 350 bar (5100 psi) Maximum pressure 420 bar (6100 psi) Open circuit Features Variable
Vane motor high performance hydraulic series M5B - M5BS - M5BF
Vane motor high performance hydraulic series M5B - M5BS - M5BF Publ. 2 - AM172 - B 1 / 25 / FB Replaces : 2 - AM172 - A L11-2172 - 2 CHARACTERISTICS - M5B* SERIES LOW NOISE MOTOR 12 vanes and a patented
Variable Displacement Motor AA6VM (A6VM)
Variable Displacement otor 6V (6V) Series 6, for open and closed circuits xial tapered piston - bent axis design 5800 psi Sizes 28 1000 Nominal Pressure up to (400 bar) Peak Pressure up to 6500 psi (450
Series PHP10 Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable
Axial Piston Variable Motor A6VM (US-Version)
xial Piston Variable Motor 6VM (US-Version) R- 91610/04.13 1/74 Replaces: 06.12 Data sheet Series 71 Sizes 60 to 215 Nominal pressure 6500 psi (450 bar) Maximum pressure 7250 psi (500 bar) Open and closed
Axial Piston Variable Pump A15VSO
Axial iston Variable ump A15VSO RE 928/5.12 1/4 Replaces: 3.1 Data sheet Series 1 Sizes 175 to 28 Nominal pressure 35 bar Maximum pressure 42 bar Open circuit Contents Ordering code for standard program
Variable Plug-in Motor A6VE
Variable Plug-in Motor 6VE RE 91616/01.12 1/52 Data sheet Series 71 Sizes 60 to 170 Nominal pressure 450 bar Maximum pressure 500 bar Open and closed circuits Contents Ordering code for standard program
Gear Pump Model G4, Series 2X
s 40 to 100 Gear ump Model G4, Series 2X 3000 SI (210 bar) 6.1 in 3 (100 cm 3 ) 10 042/03.95 10 042/03.95 eplaces: 01.91 SE connection flanges Sleeve bearings for long life Single block bearings ISO or
Modular valves DO5 (NG 10) 315 bar
Modular valves DO5 (N ) 315 bar 2 Modular valves DO5 (N ) 315 bar OSCH OSCH Modular valves DO5 (N ) 315 bar 3 roduct Range ressure relief valves age ressure reducing valves age 4 4 4 Check valves 4 16
Solutions. We Manufacture. i Hydraulics. Eaton. Variable Displacement Piston Pump. Manual Controlled
Eaton s y c h Variable Displacement Piston Pump i Hydraulics d r Manual Controlled l a Model 70160 20, cm/r [1.24 in/r] 2,6 cm/r [1.44 in/r] u u l Model 7060 40,6 cm/r [2.48 in/r] 49,2 cm/r [.00 in/r]
Axial piston variable motor A6VM series 65. Americas. RE-A Edition: Replaces:
xial piston variable motor 6VM series 65 mericas RE- 91607 Edition: 11.2015 Replaces: 01.2015 Sizes 55 to 200 Nominal pressure 5800 psi (400 bar) Maximum pressure 6500 psi (450 bar) Open and closed circuits
Axial piston variable pump A11V(L)O series 40
xial piston variable pump 11V(L)O series 40 RE 92510 Issue: 10.2014 Replaces: 10.2013 izes 110 to 280 Nominal pressure 350 bar (5100 psi) Maximum pressure 420 bar (6100 psi) Open circuit Characteristics
HYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
Axial Piston Pump Series PV Design 45 Variable Displacement. Catalogue HY /UK February 2007
Design 45 Variable Displacement February 2007 Introduction With thru drive for single and multiple pumps Swash plate type for open circuit Technical Features Low noise level Fast response (eg. PV046: upstroke
Hydraulic motor type MM. Hydraulic motor type MR SPOOL VALVE HYDRAULIC MOTORS. Quality assured company - ISO 9001 Certified
SOOL VALVE HYDAULI MOOS Quality assured company - ISO 9001 ertified SOOL VALVE - he distributor valve has been integrated with the output shaft. he valve has hydrodynamic bearings, and has infinite life
Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. Variable Displacement Piston Pump.
H y d r a u l i c s ydraulics Eaton h y d r a u l i c s Variable Displacement Piston Pump Manual Controlled Servo Controlled We Manufacture Model 70160 20, cm /r [1.24 in /r] 2,6 cm /r [1.44 in /r] Model
Axial piston variable motor A6VM series 71. Americas. RE-A Edition: Replaces:
xial piston variable motor 6VM series 71 mericas RE- 91610 Edition: 12.2015 Replaces: 04.2013 Sizes 60 to 215 Nominal pressure 6500 psi (450 bar) Maximum pressure 7250 psi (500 bar) Open and closed circuits
3/3 servo directional control valve with mechanical position feedback
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical () 426-4 www.cmafh.com 3/3 servo directional control valve with mechanical position feedback Type 4WS2EM...XN...-114
Hydrokraft Transmission Closed Loop Piston Pumps
Hydrokraft Transmission Closed Loop Piston Pumps Technical Catalog TVX Table of Contents Introduction....................................................................... 4 Model Codes Form Page.....................................................................
HMV Variable Motors Data and Specifications
Data and Specifications Specifications HMR 55 HMR 75 HMR 105 HMR 135 cm 3/rev in 3/rev 55 3.36 75 4.57 105 6.40 135 8.23 Pressure Ratings Nominal 5000 PSIG Maximum 6090PSIG Peak 7250 PSIG Rated Speed 4000
MZE03 HYDRAULIC MOTORS
MZE03 HYRULIC MOTORS T E C H N I C L C T L O G Hydraulic motors MZE03 OCLIN HYRULICS OVERVIEW Motor inertia Noise emissions = 0.0 kg.m² = 60 db - T B Check valve L B T ressure relief valve with dynamic
Variable Displacement Piston Pumps. Performance Information. Features. Specifications. Controls. Schematic Symbol (Basic Pump) Weight and Package Size
Catalog HY13-1552-2/US Technical Information Series PVC65 Performance Information Series PVC65 Compensated, Variable Volume, Piston Pump Features High Strength Cast-Iron Housing uilt-in Supercharger High
Axial Piston Variable Pump (A)A4VSG (US-Version)
Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Variable Pump ()4VSG (US-Version) R- 92100/12.12 1/72 Replaces: 10.97 Data sheet Series 10,
Technical Information Series 45 G Frame powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Technical Information Series 45 G Frame powersolutions.danfoss.com Contents Frame G Design... 4 Specifications... 5 Performance G74B... 6 Performance G9C... 7 Order code...
Series Shockless Type Solenoid Controlled Pilot Operated Directional Valves
Solenoid Controlled ilot Operated Directional Valves Electronic Circuit X Specifications Descriptions G-DSHG-4-3C - - - -/9 G-DSHG-6-3C - - - -/9 Max. Flow /min (U.S.GM) 16 (4.3) (66.1) 1 1 Max. Operating
Variable displacement axial piston pumps,
LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar
Vane motors Single & double M3B - M4 / M4S series
Vane motors Single & double M3B - M4 / M4S series Publ. 2 - AM 157 - B 07 / 97 / FB Replaces : 2 - AM 157 - A CONTENTS - M3* AND M4* SERIES GENERAL General characteristics... 3 Technical data... 4 General
HYDRAULIC MOTORS HP APPLICATION GENERAL. » Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines
HYDRAULIC HP APPLICAION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» extile machines» Agricultural machines» Food industries» Grass cutting machinery etc. CONENS Specification
Variable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
Hydraulic Pump T7AS/T7ASW Series Vane Pumps
Hydraulic ump T7A/T7AW eries Vane umps ressure up to 3 bar Fixed Displacement from 6 to 4 ml/rev. Catalogue HY29-8/UK April 26 Catalogue HY29-8/UK General Characteristics General T7A T7AW Vane umps T7A
Performance Information Series PVP 41/48 Pressure Compensated, Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Technical Information Performance Information Compensated, Variable Volume, Piston Pumps Features High Strength Cast-Iron Housing for Reliability and Quiet Operation Vickers Porting
H1 Axial Piston Tandem Pumps Size 045/053
MAKING MODERN LIVING POSSIBLE Technical Information H1 Axial Piston Tandem Pumps Size 045/053 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 2015 Master Model
Variable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
MDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
Axial piston variable pump (A)A4VSO
Axial piston variable pump (A)A4VSO RA 92050-A/06.09 1/64 Replaces: 09.97 Data sheet Series 10, 11 and 30 Size 40...1000 Nominal pressure 5100 psi (350 bar) Peak pressure 5800 psi (400 bar) Open circuit
TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 855 / 0817 / E
HYDRULIC COMPONENTS HYDROSTTIC TRNSMISSIONS GERBOXES - CCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODEN (ITLY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730
Valve Products Viking Lite Valves
atalog 0697- arker neumatic alve roducts iking ite alves The iking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or /8
Closed-loop pressure and flow control system
Closed-loop pressure and flow control system RE 30024/11.03 Replaces: 10.02 1/12 Type SYDFE1 Series 2X H6707 Table of contents Contents age Features 1 Ordering code 2, 3 Function, section 4 Schematic diagram
Winch control block. RE 65051/08.04 Replaces: Type YM-WCB
Winch control block RE 65051/08.04 Replaces: 02.00 1/12 Type YM-WC Noal size 16 Component series 4X Maximum operating pressure 315 bar Maximum flow 300 / H6537 Overview Contents age Features 1 Ordering
TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
Motors & Pumps- Hydraulic Pumps, Motors & Power Units
- Hydraulic umps, Motors & ower Units - Rapid Response...12-1 12-6 Hydraulic umps - Check Valves...12-7 Hydraulic umps - ower Units...12-8 12-9 12MOTORS & UMS Hydraulic umps - Vane ump...12-10 Motors...12-11
Solutions. We Manufacture. H y d r a u l i c s. Eaton Medium Duty Piston Pump. h y d r a u l i c s
H y d r a u l i c s ydraulics Eaton Medium Duty Piston Pump h y d r a u l i c s Model 70122, 70422, 70423, and 70523 or -Flow Compensated Piston Pumps We Manufacture April 1997 Solutions S o l u t i o
PM45 VARIABLE DISPLACEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C A L C A T A L O G
PM45 VRILE DISPLCEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C L C T L O G PM45 - Variable displacement pump POCLIN HYDRULICS OVERVIEW PM45 is a variable displacement, axial piston pump, with swashplate
Series PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2661-CD/US zp2 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference Only
VIS 40 Series Two-speed
Specifications Back Pressure Relief Shuttle Selector Plate Plate Balance Plate Face Seal Mounting Flange End Cap Front Retainer Seal Guard Output Shaft Selector Geroler Drive Bearings Shaft Seal VIS 40
Fixed Displacement Motor AA2FM (A2FM)
Fixed Displacement Motor 2FM (2FM) Series 6, for Open and Closed Circuits xial Piston, ent xis Design 5800 psi 6500 psi rueninghaus Hydromatik Sizes 5 1000 Nominal Pressure up to Peak Pressure up to (400
Model Model Model Model Back to Back. Medium Pressure Piston Pump Variable Displacement Closed Circuit
Medium Pressure Piston Pump Variable Displacement Closed Circuit Model 76 2.3 cm 3 /r [.24 in 3 /r] 23.6 cm 3 /r [.44 in 3 /r] Model 736 4.6 cm 3 /r [2.48 in 3 /r] 49.2 cm 3 /r [3. in 3 /r] Model 724 4.6
Variable displacement axial piston pump type V30D
Variable displacement axial piston pump type V30D for open circuit Pressure p max Displacement V max = 420 bar (6000 psi) = 260 cm 3 /rev (16.16 cu in/rev) 1.2 1. General description The axial piston variable
HPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
V33D-250 CLOSED LOOP. Tradition Quality Future
V33D-250 CLOSED LOOP Variable displacement axial piston pump type V33D closed loop, Peak pressure 420 bar Tradition Quality Future HGH-PERFORMNCE PUMPS MDE N GERMNY 1 V33D enefits 3 High performance 3
Electric Proportional Pressure Reducing Valves Series ERP 03.ERP
Electric roportional ressure Reducing Valves Series ER 03.ER - 0912 Electric proportional pressure reducing valves SERIES ER Index of content: Description and main features: age 3 echnical data: age 4
PM25 VARIABLE DISPLACEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C A L C A T A L O G
PM25 VRILE DISPLCEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C L C T L O G PM25 - Variable displacement pump POCLIN HYDRULICS OVERVIEW PM25 is a variable displacement, axial piston pump, with swashplate
PM10 VARIABLE DISPLACEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C A L C A T A L O G
PM10 VRIBLE DISPLCEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C L C T L O G PM10 - Variable displacement pump POCLIN HYDRULICS OVERVIEW PM10 is a variable displacement, axial piston pump, with swashplate
Series 2 Variable Displacement Piston Pump
Series 2 Variable Displacement Piston Pump ACL 64-105cm 3 /r (3.9-6.4in 3 /r) 2 eaton Series 2 Variable Displacement Piston Pump E-PUPI-MC004-E1 January 2010 Series 2 Variable Displacement Piston Pump
Displacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor
![Displacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor](/thumbs/78/77251657.jpg "Displacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor")
HP30 Motor Design code -003 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for performance For the past 55 years, Char-Lynn has been recognized as the
V Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,
LECTURE 24 TO 26 - HYDRAULIC CIRCUIT DESIGN FREQUENTLY ASKED QUESTIONS
LECUE 24 O 26 - HYDAULIC CICUI DESIGN EQUENLY ASKED QUESIONS 1. List three important considerations to be taken into account while designing a hydraulic circuit here are 3 important considerations in designing
PVE 19 & 21 Piston Pumps
Engineering PVE 19 & 21 Piston Pumps Pressures to 3500 psi For Mobile and Industrial Use Same Day Shipments Rated for 2400 rpm > Speeds to 2400 rpm www.fluidynefp.com Table of Contents Introduction...2
Series PVP Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PVP Variable Volume, Piston Pumps Catalog 26-12-1/US hpm12-1.p65, lw, jk 57 Catalog HY13-1553-1/N,EU hpm12-1.p65, lw, jk 58 Catalog HY13-1553-1/N,EU Introduction Series
V Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
Hydraulic Motors. Series V12, V14, T12 Variable Displacement
Series V12, V14, T12 Variable Displacement General information Series V12, V14 and T12 Basic formulas for hydraulic motors ) Displacement (D α ) D α = D 35 x sin α [cm 3 /rev] sin 35 α - displacement angle
Denison GOLD CUP Piston Pumps & Motors. For Open & Closed Circuits
Denison GOLD CUP Piston Pumps & Motors or Open & Closed Circuits aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic
Filtration Contamination class 10, according to NAS 1638 can be realized with filter ß = 75
ccumulators 19 ccumulator ischarge Valve 3 Specifications Valve Function ccumulator ischarge Mounting Inline not restricted Fluid Mineral-oil or fluid HF / B / C / Viscosity 6... 25 SUS (1... 5 cst) Fluid-temperature
Fixed Displacement Motor A10FM A10FE
Electric Drives and Controls Hydraulics inear Motion and ssembly Technologies Pneumatics Service Fixed Displacement Motor 10FM 10FE RE 91 172/06.06 1/24 Replaces: 01.03 Technical Data Sheet Size 10...63
IFP HIGH PERFORMANCE INDUSTRIAL SINGLE INTRA-VANE PUMPS
IFP HIGH PERFORMANCE INDUSTRIAL SINGLE INTRA-VANE PUMPS * High Volumetric Efficiency * Maximum 3000 PSI operating pressure * Twelve Vane Design for quite operation * Hydraulic Balanced for external life
HYDRAULIC MOTORS EPMT
HYDRAULIC APPLICATION Conveyors; Metal working machines; Machines for agriculture; Road building machines; Mining machinery; Food industries; Special vehicles; Plastic and rubber machinery etc. CONTENTS
Hydrostatic Drive. 1. Main Pump. Hydrostatic Drive
Hydrostatic Drive The Hydrostatic drive is used to drive a hydraulic motor at variable speed. A bi-directional, variable displacement pump controls the direction and speed of the hydraulic motor. This
Pump Safety Block Model DBA... / DBAW, Series 1X
ump Safety lock odel D... / DW, Series X Sizes to 6 SI ( bar) 7 G (65 L/min) R 5 88/.95 Replaces:.9 ermits low pressure start-up and by-pass of pump Direct mounting to SE pressure port of pump Light biasing
Post-Compensated Proportional Valve CV2000LS
www.nimco-controls.com Post-Compensated Proportional Valve CV2000LS Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16
Hydraulic Motors. Series V12, V14, T12 Variable Displacement
Series V12, V14, T12 Variable Displacement General information Series V12, V14 and T12 Torque (M) M = D x p x η hm [Nm] 63 Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
Axial piston variable pump A15VSO, A15VLO series 10 (US-Version)
xial piston variable pump 15VO, 15VLO series 10 (U-Version) R- 92800 Edition: 11.2013 Replaces:. izes 110 to 280 Nominal pressure 5100 psi (350 bar) Maximum pressure 6100 psi (420 bar) Open circuit Features
Performance Information Series PVP 100/140 Pressure Compensated, Variable Volume, Piston Pumps
Catalog HY13-155-2/US Technical Information Series PVP 1/14 Performance Information Series PVP 1/14 Compensated, Variable Volume, Piston Pumps Features High Strength Cast-Iron Housing for Reliability and
Produktová rada MP1. Miroslav Chmatil.
Produktová rada MP1 Miroslav Chmatil www.powersolutions.danfoss.com 28/32cc 38/45cc 11x male pistons MP1 Pump Initial Option Portfolio (IOP) Feature Details Mounting Flange SAE B, 2 bolt Input Shafts 13T,
Functional Symbols and Application Notes
Functional Symbols and pplication Notes Model Types KHDG5V Shown Simplified symbol Model Types KHDG5V Shown K()FDG5V symbols identical, but omit pilot-stage LVDTs Simplified symbol T T Detailed symbol
APV Load Sensing Valve
www.k-fluidpower.com V Load Sensing Valve V0: V6: V 22: V 32: Max. flow: port 60 l/min 260 l/min 660 l/min 2000 l/min port / 80 l/min 50 l/min 380 l/min 800 l/min Max. pressure: port // 350 bar 420 bar
AXIAL PISTON PUMPS VARIABLE DISPLACEMENT
FEATURES The Series is a family of variable displacement axial piston pumps for use in closed circuits. The displacement is continuously variable by means of a tilting swash plate and the oil flow direction
Piston Pumps Series P2 / P3 Variable Displacement
Piston Pumps Series P2 / P3 Variable Displacement Catalogue HY11-2600/UK July 2003 Contents Series P2/P3 Description Technical information 3 Ordering code 4 Control options LA and LB 6 Control options
» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC HW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
Directional Controls
Vickers Directional Controls Mechanical ctuators Directional Control Valves Directional Control Valves 310 bar (4500 psi) Flows to 114 l/min (30 USgpm) NF D05, ISO-4401-05 DG1V4-01**-10 Knob Operated DG17V4-01**-10
PM25 VARIABLE DISPLACEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C A L C A T A L O G
PM25 VRILE DISPLCEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C L C T L O G PM25 - Variable displacement pump POCLIN HYDRULICS OVERVIEW PM25 is a variable displacement, axial piston pump, with swashplate
Vane motors Single & double zm21 M3B - M4 / M4S series
Vane motors Single & double zm21 M3B - M4 / M4S series Publ. 2 - AM 157 - B 07 / 97 / FB Replaces : 2 - AM 157 - A CHARACTERISTICS - M3* AND M4* SERIES HIGH STARTING TORQUE EFFICIENCY HIGH VOLUMETRIC EFFICIENCY
Axial Piston Fixed Motor A10FM / A10FE (US-Version)
xial Piston Fixed Motor 10FM / 10FE (US-Version) R- 91172/03.12 1/32 Replaces: 01.11 Data sheet Series 52 Sizes 10 to 63 Nominal pressure 4000 psi (280 bar) Maximum pressure 5100 psi (350 bar) Open and
Hydraulic Motor Series V12 Variable Displacement
Variable Displacement Catalog 9129 8217-02 June, 1998 GB Content General information 3 V12 cross section 3 Specifications 4 Efficiency diagrams 5 Ordering codes 6 Installation dimensions - ISO version
VIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
Char-Lynn HP 30 Motor
Char-Lynn HP 30 Motor Displacements cm 3 /r (in 3 /r) 344 (21.0) 400 (24.4) 434 (26.5) 480 (29.3) 677 (41.3) Engineered for Performance For the past 45 years, Char-Lynn has been recognized as the industry