V Series AXIAL PISTON PUMP ORDER CODE
|
|
- Ashlee Malone
- 5 years ago
- Views:
Transcription
1 V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25, 38, 42, 5, 7 Pump Control Type (See pages 14-17): A - Pressure Compensator Control B - Multi stage flow-single stage Pressure Control (with cylinder) C - 2 stage Pressure & Flow Control C G - 2 stage remote Pressure & Flow Control D - Solenoid controlled Pressure Compensator with unloading device D G - Solenoid controlled Pressure Compensator with unloading & remote device E - Dual Pressure Control E G - Dual & Remote Pressure Control F - 2 Flow - 2 Pressure Pressure Control by Solenoid Operated Valve F G - 2 Flow - 2 Pressure Pressure Control by Solenoid Operated & remote Valve G - Remote Pressure Compensator Control G J - Proportional pressure with interface NG6 G M - Remote interface (pilot valve not included) HL* - Load-sensing Compensator HJ - Load-sensing & Proportional Electro-hydraulic Pilot Relief Valve HK - Proportional Electro-hydraulic Load-sensing Control HQ - Load-sensing & Proportional Flow Control Design Number: X = Standard Y = Low pressure Z = Idling Relief Rear Flange: none = single pump C = SAE AA, Ø 5,8 mm. D = SAE A, Ø 82,55 mm. E = SAE B, Ø 11,6 mm. F = SAE C, Ø 127 mm. I = Metric, Ø 63 mm. J = Metric, Ø 8 mm. K = Metric, Ø 1 mm. L = Metric, Ø 125 mm. Threads Code: 1 = PT (Pipe tape) 4 = BSPP (G) 5 = NPT 6 = SAE (O Ring Flange) 7 = M (Metric) * HL Compensator Pressure setting: none - Standard pressure,7 MPa (7 bar) B - Medium pressure 1,4 MPa (14 bar) C - High pressure 2,1 MPa (21 bar) Pump Pressure Setting: 1 -,8-6,9 MPa (8-7 bar) 2-1,5-13,7 MPa (15-14 bar) 3-2, - 2,6 MPa (2-21 bar) 4-2, - 24,5 MPa (2-25 bar) Shaft Rotation (view from shaft end): R - Clockwise rotation (Right) L - Counter Clockwise rotation (Left) Direction of Pipe Connection: none - Side port (Standard) B - Rear aial port Electric Supply (only for electric control devices): A = 1 V AC - 5 / 6 Hz B = 11 V AC - 6 Hz C = 2 V AC - 5 / 6 Hz D = 22 V AC - 6 Hz E = 12 V DC F = 24 V DC Mounting Shaft and Type: none - Parallel shaft with key S * - Splined shaft SAE J 498 b * V 15 - V 18 S z = 13-16/32 DP S 1 z = 9-16/32 DP S 2 z = 11-16/32 DP * V 23 - V 25 - V 38 - V 42 S z = 13-16/32 DP S 1 z = 15-16/32 DP * V 5 - V 7 S z = 14-12/24 DP S 1 z = 17-12/24 DP HT 13 / A / 18 / 18 / E Pag. 7
2 AXIAL PISTON PUMPS V Series AXIAL PISTON PUMP FEATURES The latest design in the proven V Series, medium pressure, open loop system variable displacement pump has been developed for the mobile and industrial market where low reliability are all considered essential. options allow each of the V Series units to be easily matched to any application. Specially designed for the noise-critical application, its rigid and compact structure reduces air borne noise emissions. All noise reduction features of the V Series provide a typical reduction of 6dB(A) compared with conventional designs. Technical Characteristics Ma. Delivery under unloading conditions Pressure Input Speed range Pump Displacement Weight pressure lt/min. model cm 3 adjustment range n/min. /n kg bar bar 1.5 n/min. 1.8 n/min. min. ma. V 15 A 25 15, 22,5 27, 13, V 18 A 25 17,8 26,7 32, 13, V 23 A 25 23, 35,4 41,4 22, V 25 A 25 25, 37,5 45, 22, V 38 A 25 37,8 56,7 68, 26, V 42 A 25 42, 63, 76, 26, 1 : 8-7 V 5 A 21 51,5 77,2 92,7 2 : , V 7 A 21 69,7 14,5 125,4 3 : , 4 : 2-25 V 15 A + V 15 A 25 15, + 15, 22,5 + 22,5 27, + 27, 28, 5 V 23 A + V 23 A 25 23, + 23, 35,4 + 35,4 41,4 + 41,4 46, 5 V 38 A + V 15 A 25 37,8 + 15, 56,7 + 22,5 68, + 27, 41, 5 V 38 A + V 38 A 25 37,8 + 37,8 56,7 + 56,7 68, + 68, 54, 5 V 7 A + V 15 A 21 69,7 + 15, 14,5 + 22,5 125,4 + 27, 71, 5 V 7 A + V 38 A 21 69,7 + 37,8 14,5 + 56,7 125,4 + 68, 84, 5 Pag. 12 HT 13 / A / 17 / 612 / E
3 AXIAL PISTON PUMPS Typical performance characteristics TEMPERATURE DIFFERENCE * Input speed: 1,8 n/min * Oil: ISO VG32 * Oil temperature: 5 C 7Kg/cm 2 35Kg/cm HOUR (Hr) Noise level (db-a) Noise level* at distance of 1 mt. from pump* Ma. displacement 1,8 n/min 1,5 n/min PC cut off period (35) (7) (15) (14) (175) (21) Pressure MPa (kg/cm 2 ) (25) Efficiency (%) General performance characteristics Volumetric efficiency Overall efficiency Displacement Shaft input (35) (7) (15) (14) (175) (21) Shaft input (kw) Input power at head Shaft input characteristics 26.6l/min 21.3l/min 16.l/min 1.7l/min 5.6l/min (25) Displacement (lt/min.) Shaft input (kw) Dead head shaft input 1 RY type 1 type 2,3,4 types (35) (7) (15) (14) (175) (21) Pressure MPa (kg/cm 2 ) Pressure MPa (kg/cm 2 ) (35) (7) (15) (14) (175) (21) (25) Drain volume characteristics 1 type 2,3 type (35) (7) (15) (14) (175) (21) Pressure MPa (kg/cm 2 ) Pressure MPa (kg/cm 2 ) Drain volume (l/min) DH shaft input (kw) (25) PC period (25) Pag. 18 HT 13 / A / 17 / 612 / E
4 FUNCTIONAL DESCRIPTION OF REGULATOR Control Type Hydraulic Symbol Control Curve A - Pressure compensator control 1 - When system pressure increase and reach preset pressure the flow decrease automatically and pressure maintain without changing. 2 - Flow and pressure can be adjusted manually. B - Multi-stage flow & single-stage pressure control (with cylinder) 1 - Flow can be adjusted form zero to maimum and pressure can have been maintaining at preset pressure. 2 - Absorbing impact and vibration which are produced by up and down motions of actuators. It is suitable for lifting equipment etc... C - Two-stage pressure & flow control 1 - Low consumption electric motor can be selected to save energy because of the functions of high flow at low pressure and low flow at high pressure. 2 - When pressure increase and reach preset pressure "PH", flow is reduced to "QL". 3 - Pressure "PH-PL"and Flow "QH QL" can be adjusted optionally. 4 - It is applied to actuators requiring long unloaded or short loaded strokes. Speedy and horse-power efficient. CG - Two-stage remote pressure & flow control 1 - The same function of "C" control type. 2 - The pressure range can be adjusted remotely by the integrated remote pressure control valve. 3 - Proportional Electro-Hydraulic pressure control can be applied with proportional valve. Pag. 8 HT 13 / A / 18 / 18 / E
5 V 15 - V 18 Series Aial Piston Pump - Installation Drawing V 15 A - V 18 A Pressure Compensator V 15 A - V 18 A Pressure Compensator (SAE A two bolt) V 15 B - V 18 B Multi-Stage Flow & Single - Stage Pressure Compensator Control (with cylinder) Notes: - Inlet - Outlet port are for standard rotation (clockwise). - For shaft detail see page 2. HT 13 / A / 18 / 18 / E Pag. 13
6 V 15 - V 18 Series Aial Piston Pump - Installation Drawing V 15 HK - V 18 HK Proportional Electro-Hydraulic Load Sensing Compensator V 15 HQ - V 18 HQ Load-Sensing Proportional Flow Control V 15 - V 18 Splined Shaft Type V 15 - V 18 Hydraulic Flange Notes: - Inlet - Outlet port are for standard rotation (clockwise). - For shaft detail see page 2. Pag. 18 HT 13 / A / 18 / 18 / E
7 V 15 - V 18 Series Aial Piston Pump - Installation Drawing - Shaft Option Parallel Shaft Splined Shaft Spline Characteristics Splined shaft type S Splined shaft type S 1 Splined shaft type S 2 SAE J 498 B 13 theet 16/32 DP Involute spline 3 SAE J 498 B 9 theet 16/32 DP Involute spline 3 SAE J 498 B 11 theet 16/32 DP Involute spline 3 Pag. 2 HT 13 / A / 18 / 18 / E
V Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
More informationVariable Displacement Open Loop Circuit Axial Piston Pumps. V Series
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 59 415 711 Fax: +39 59 415 729 / 59 415 73 INTERNET: http://www.hansatmp.it E-MAIL:
More informationAXIAL PISTON PUMPS V SERIES V 23 - V 25 Series Axial Piston Pump Installation drawings
V 23 - V 25 Series Axial Piston Pump Installation drawings V 23 FG - V 25 FG Dual Pressure & Flow Control by Solenoid Operated & Remote Valve V 23 G - V 25 G Remote Pressure Compensator Control V 23 GJ
More informationVariable Displacement Open Loop Circuit Axial Piston Pumps AR Series
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 59 415 711 Fax: +39 59 415 729 / 59 415 73 INTERNET: http://www.hansatmp.it E-MAIL:
More informationTPV Variable Displacement Axial Piston Pumps CONTENTS. General Information. Installation Instructions. Technical Specifications 6-7
CONTENTS General Information Installation Instructions Technical Specifications Single Pump Installation Drawing Tandem Pump Installation Drawing Mounting Flanges and Shaft Details Rear Pump Mounting Flanges
More informationAxial Piston Pump Series PV Design 45 Variable Displacement. Catalogue HY /UK February 2007
Design 45 Variable Displacement February 2007 Introduction With thru drive for single and multiple pumps Swash plate type for open circuit Technical Features Low noise level Fast response (eg. PV046: upstroke
More informationTPV 4000 (EX 28-41) Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE TRANSMISSION LINE OF HANSA-TMP HT 16 / M / 280 / 1008 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 403 / 1110 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
More informationOutput flow In l/min at 1500 min
Introduction With thru drive For single and multiple pumps Swash plate type for open circuit 1. New type of swash plate and large servo piston with strong bias spring achieves fast response, reduce the
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 114 / 0814 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationTMF 500. Fixed Displacement Axial Piston Motor for Open and Closed Loop System MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 /
More informationTHE PRODUCTION LINE OF PONAR WADOWICE
PONAR Wadowice S.A. ul. Wojska Polskiego 29 34-100 Wadowice Tel.: +48 33 488 21 00 Fax: +48 33 488 21 03 E-mail: ponar@ponar-wadowice.pl Web: www.ponar-wadowice.pl THE PRODUCTION LINE OF PONAR WADOWICE
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More information2.3 MEDIUM HEAVY DUTY SERIES
2 2.3 MEDIUM HEAVY DUTY SERIES CONTENTS PPV11 Ordering Code 2.3.1 Medium Heavy Duty Series 2.3.2 Torque limiter settings Technical Information 2.3.3 Specifications 2.3.4 Hydraulic fluids 2.3.5 Viscosity
More informationPUMP SIZE Flow rate at 1500 rpm lt/min Operating pressures bar
/7 ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
More informationPVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS
14 110/117 ED PVE VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT OPERATING PRINCIPLE The PVE pumps are variable displacement vane pumps with direct pressure regulator. The pump group
More informationAxial piston pumps type PVPC variable displacement, by a full line of mechanical controls
www.atos.com Table A600/E Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls PVPCCH4046 PVPC are variable displacement axial piston pumps for high pressure operation,
More informationPump model PVPP-*-3023 PVPP-*-3033 PVPP-*-4048 PVPP-*-5060 PVPP-* Max flow at 1500 rpm and 7 bar [l/min]
900 Table A0obs/E Axial piston pumps type PVPP, variable displacement, high pressure operation Hydraulic and electrohydraulic control obsolete components - availability on request PVPP-SLER-08/D PVPP are
More informationTPVT 1200 BTB. Variable Displacement Axial Piston Pumps CONTENTS. General Information. Installation Instructions. Technical Specifications 6-7
CONTENTS General Information Installation Instructions Technical Specifications Tandem Pump Installation Drawings Hydraulic Diagrams Rear Pump Mounting Flanges Mounting Shaft and Shaft Details Control
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationTPV 1000 (Ex 6-18) Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 109 / 1008 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationVariable Displacement Piston Pumps for Industrial Applications
Vickers Piston Pumps Variable Displacement Piston Pumps for Industrial Applications PVQ2 Family 21,1 to 141 cm 3 /r (1.29 to 8.64 in 3 /r) Displacements 23 bar (33 psi) Max. Pressure 514./EN/598/A Introduction
More informationTPV 1200 BTB. Variable Displacement Closed Loop System Axial Piston Compact Tandem Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 160 / 0516 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationEaton PVM Variable Displacement Piston Pumps Vickers Product Line cc 3 ( in 3 )
Eaton PVM Variable Displacement Piston Pumps Vickers Product Line 18-141cc 3 (1.1-8.6in 3 ) Table of Contents M Series Variable Displacement Piston Pumps Introduction.... 3 Hydraulic System Design Calculations....
More informationVariable Axial Piston Eaton Vickers PVH Pump
Variable Axial Piston Eaton Vickers PVH Pump PVH High pressure axial piston pumps with low noise PVH high flow, high performance pumps are a family of variable displacement, inline piston units that incorporate
More informationSeries PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2661-CD/US zp2 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference Only
More informationTPV 1200 BTB. Variable Displacement Closed Loop System Axial Piston Compact Tandem Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 154 / 0413 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified ISO 9001 and 14001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 TERNET:
More informationHP3V SERIES. Swash-plate Type Axial Piston Variable Displacement Pump
1 /32 HP3V SERIES Swash-plate Type Axial Piston Variable Displacement Pump Hengli swash-plate axial piston pump HP3V, the key parts of the pump are made of imported materials, quality strictly controlled,
More informationVariable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
More informationHPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
More informationAXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid Above figure shows schematically
More informationA Series Variable Displacement Piston Pumps
A Series Variable Displacement Piston Pumps A37 A56 A1637 A16 A10 A Series Variable Displacement Piston Pumps Pump Type Graphic Symbol Geometric Displacement cm 3 /rev 1 5 10 0 50 100 00 300 Maximum Operating
More informationAXIAL PISTON MOTORS SHMF
SECTIONAL VIEW Purge relief valve High pressure relief valves (adjustable) Cylinder block assembly Shaft seal Output shaft Valve block Shuttle valve Swashplate 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working
More informationPVE 19 & 21 Piston Pumps
Engineering PVE 19 & 21 Piston Pumps Pressures to 3500 psi For Mobile and Industrial Use Same Day Shipments Rated for 2400 rpm > Speeds to 2400 rpm www.fluidynefp.com Table of Contents Introduction...2
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationVariable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
More informationP2060 P2075 P2105 P2145 P3105 P3145
Technical Information Technical Features P2 Series Compact design Low noise level Service friendly Reliable Long-lasting Flexible Easy to install High self-priming speed Technical Data P3 Series P2 Series
More informationPilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
More informationCatalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA
Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.
More informationA Series Variable Displacement Piston Pumps. A16 Type performance characteristics A16 Type Noise level characteristics.
EIC--12- PISTON PUMPS Series Variable Features High efficiency Under the conditions of pressure 16 Kgf/cm² and speed 18 r/min. volumetric efficiency is over 98% and the overall efficiency is over 9%. Low
More informationAxial Piston Variable Double Pump A8VO
Axial Piston Variable Double Pump A8VO RE 93010/03.09 1/40 Replaces: 11.07 Data sheet Series 61 / 63 Sizes 55...200 Nominal pressure 350 bar Peak pressure 400 bar for open circuit Contents Ordering Code
More informationCONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMPS
CONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMPS 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM LPV PUMPS FEATURES AND BENEFITS The LPV line of Variable
More informationExtremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
More informationRadial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm Speed up to 125
More informationAxial piston variable pump A4VG Series 32. Europe. RE-E Edition: Replaces:
Axial piston variable pump A4VG Series 32 Europe RE-E 92003 Edition: 04.2016 Replaces: 06.2012 High-pressure pump for applications in a closed circuit Size 28 to 125 Nominal pressure 400 bar Maximum pressure
More informationAxial piston pumps type PVPC variable displacement, by a full line of mechanical controls
www.atos.com Table A60/E Axial piston pumps type PVP variable displacement, by a full line of mechanical controls PVPH4046 PVP are variable displacement axial piston pumps for high pressure operation,
More informationPowrFlow PVX Vane Pumps
PowrFlow PVX Vane Pumps POWRFLOW PVX VANE PUMPS YOUR SOURCE FOR VANE PUMPS FOR THE MOST DEMANDING APPLICATIONS What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane
More informationXAi series. the intelligent pump - SAE version. fixed displacement bent axis design. XAi SAE version - Presentation ADVANTAGES
XAi SAE version - Presentation XAi series the intelligent pump - SAE version fixed displacement bent axis design The compact size envelope of XAi pumps, together their technology, means they can be installed
More informationAxial piston variable pump A10V(S)O Series 31
Axial piston variable pump A10V()O eries 31 RE 92701 Edition: 06.2016 Replaces: 01.2012 ize 18 (A10VO) izes 28 to 1 (A10VO) Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Features Variable
More informationVariable displacement axial piston pumps,
LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar
More informationCatalog PowrFlowTM PVX Vane Pumps
Catalog PowrFlowTM PVX Vane Pumps Your source for vane pumps for the most demanding applications. What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane Pumps deliver
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationAxial piston variable pump A10VO series 52 and 53
Axial piston variable pump A10VO series 52 and 53 RE 92703 Edition: 10.2014 Replaces: 08.2011 izes 10 to 100 Nominal pressure 250 bar Maximum pressure 315 bar Open circuit A10VO 63DR/53... Features Variable
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 851 / 0813 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES THE PRODUCTION LINE OF HANSA-TMP Variable Displacement Closed Loop System CONTENTS General Information... Order Code... Manual Control
More informationAxial piston pumps type PVPC variable displacement, by a full line of mechanical controls
www.atos.com Table A60/E Axial piston pumps type PVP variable displacement, by a full line of mechanical controls PVPL4046 PVP are variable displacement axial piston pumps for high pressure operation,
More informationFlow sharing control block in mono block / sandwich plate design M6-22
Flow sharing control block in mono block / sandwich plate design M6-22 RE 64322 Edition: 01.2015 Replaces: 05.2012 Size 22 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420
More informationAxial piston pumps type PVPC with ISO mounting flange variable displacement, hydraulic control
www.atos.com Table TA623/E Axial piston pumps type PVP with ISO mounting flange variable displacement, hydraulic control PVPH4046 PVP are variable displacement axial piston pumps for high pressure operation,
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS FEATURES Variable displacement axial piston pumps swash plate design ideally suited for medium and high pressure open circuit applications. The compact design allows
More informationWhere theree are hydraulic transmissions Where there are YUCI products
YUCI HYDRAULIC YUCI-REXROTH SERIES VARIABLE DISPLACEMENT PISTON PUMPS YUCI-REXROTH SERIES HYDRAULIC VALVES MULTIPLE VALVES Where theree are hydraulic transmissions Where there are YUCI products Table of
More informationSeries 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
More informationDisplacement. (cc/rev) Tap Water Sea Water PC PV
J anus Pumps - Axial Piston Totally oil free, clean and completely safe for people, processes and products. As a result of employing advanced materials, high velocity and loaded sliding surfaces can operate
More informationAxial piston variable pump A10V(S)O Series 31. Americas. RE-A Edition: Replaces:
Axial piston variable pump A10V()O eries 31 Americas RE-A 92701 Edition: 02.2017 Replaces: 03.2012 ize 18 (A10VO) izes 28 to 140 (A10VO) Nominal pressure 4100 psi (280 bar) Maximum pressure 5100 psi (350
More informationRadial piston motors for industrial applications MCR-D
Radial piston motors for industrial applications MCR-D MCR-E RE 15196 Edition: 02.2017 Replaces: 12.2013 MCR-D Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationVariable Displacement Pumps
variable displacement pumps variable displacement pumps Variable Displacement Pump Prices Seal Kits Prices Application & Features A10VSO Pumps Dimensions Technical Information Sec:2 Sec:2 Sec:3 Sec:4 Sec:8
More informationISO Certificate N 12-E TIC. ISO 9001 Certificate N 12-Q TIC
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Certificate N 12-Q-0200545-TIC ISO 14001 Certificate N 12-E-0200545-TIC Via M. L. King,
More informationRadial piston motor for frame integrated drives MCR-A
Radial piston motor for frame integrated drives MCR-A RE 15195 Edition: 12.2013 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530
More informationAxial Piston Variable Pump A10VSO
Axial Piston Variable Pump A10VO RE 92711/01.12 1/48 Replaces: 06.09 and RE 92707/11.10 Data sheet eries 31 izes 18 to 1 Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Contents Type code
More informationSeries 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationAxial Piston Variable Pump A15VSO
Axial iston Variable ump A15VSO RE 928/5.12 1/4 Replaces: 3.1 Data sheet Series 1 Sizes 175 to 28 Nominal pressure 35 bar Maximum pressure 42 bar Open circuit Contents Ordering code for standard program
More informationVariable displacement axial piston pump type V30D
Variable displacement axial piston pump type V30D for open circuit Pressure p max Displacement V max = 420 bar (6000 psi) = 260 cm 3 /rev (16.16 cu in/rev) 1.2 1. General description The axial piston variable
More informationRadial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 02.2017 Replaces: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm
More informationVARIABLE DISPLACEMENT PISTON PUMPS
VRIBLE DISPLCEMENT Pump Type "R" Series Variable Displacement Piston Pumps Maximum Operating MPa (PSI) () Geometric Displacement cu. in./rev... cm /rev R R Catalogue No. Pub. EC- "" Series Variable Displacement
More informationVickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
More information2.4 HEAVY DUTY SERIES
2 2.4 HEAVY DUTY SERIES CONTENTS PPV102 Ordering Code 2.4.1 Heavy Duty Series 2.4.2 Heavy Duty Series compensator 2.4.3 Standard gear pump models Technical Information 2.4.4 Specifications 2.4.5 Hydraulic
More informationAxial piston variable pump A10VSO series 32. Americas. RE-A Issue: Replaces:
Axial piston variable pump A10VO series 32 Americas RE-A 92714 Issue: 02.15 Replaces: 06.11 izes 45 to 180 Nominal pressure 4100 psi (280 bar) Maximum pressure 5100 psi (350 bar) For industrial application
More informationAXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 AXIAL PISTON PUMPS SHPV SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid
More informationAP212HP Cast Iron Gear Pumps
Cast Iron Gear Pumps Standard and Low Noise series Reference: 200-P-991236-EN-01 Issue: 09.2016 1/56 Contents Page 1 General information... 5 1.1 External gear pumps components... 6 1.2 Technical data...
More informationRadial piston motor for track drives MCR-T
Radial piston motor for track drives MCR-T RE 15221 Edition: 03.2017 Replaces 07.2015 Frame size MCR5, MCR6, MCR10 Displacement 620cc to 1340cc Differential pressure up to 400 bar Torque output up to 8530
More informationC9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic
More informationXAi series. the intelligent pump - SAE version. fixed displacement bent axis design. XAi SAE version - Presentation ADVANTAGES
XAi SAE version - Presentation XAi series the intelligent pump - SAE version fixed displacement bent axis design The compact size envelope of XAi pumps, together with their technology, means they can be
More informationProportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
More informationPVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS
PVX-11 VANE PUMPS VARIABLE DISPLACEMENT, COMPENSATED NOTE: See pages thru 14 for PVX-11 dimensions. PERFORMANCE SPECIFICATIONS Displacement (Nominal) 1.5 in 3 /rev. (25 cm 3 /rev.) Displacement (Actual)
More informationRV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
14 201/118 ED RV1P VARIABLE DISPLACEMENT VANE PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS (measured with mineral oil with viscosity of 46 cst at 40 C) RV1P are variable displacement vane pumps with
More informationAxial Piston Fixed Motor A2FM
Axial Piston Fixed Motor A2FM RE 91001/06.2012 1/46 Replaces: 09.07 Data sheet Series 6 Size Nominal pressure/maximum pressure 5 315/350 bar 10 to 200 400/450 bar 250 to 1000 350/400 bar Open and closed
More informationPerformance Information Series PVP 41/48 Pressure Compensated, Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Technical Information Performance Information Compensated, Variable Volume, Piston Pumps Features High Strength Cast-Iron Housing for Reliability and Quiet Operation Vickers Porting
More informationAxial piston variable pump A7VO
Axial piston variable pump A7VO RE 92203/06.09 1/52 Replaces: 05.99 Data sheet Series 63 Sizes NG250 to 500 Nominal pressure 350 bar Peak pressure 400 bar Open circuit Contents Type code for Standard program
More informationAxial piston variable pump A10VSO Series 31
Axial piston variable pump A10VO eries 31 RE 92711 Edition: 10.2016 Replaces: 01.2012 All-purpose medium pressure pump izes 18 to 140 Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Features
More informationAXIAL PISTON PUMPS VARIABLE DISPLACEMENT
FEATURES The Series is a family of variable displacement axial piston pumps for use in closed circuits. The displacement is continuously variable by means of a tilting swash plate and the oil flow direction
More information" " Series Variable Displacement Piston Pumps
" " Series Variable Displacement Piston Pumps AR Axial Port Type AR Side Port Type "AR" series variable displacement pump has been developed which the aim of even further the quientness in operation, smaller
More informationAxial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 07.2016 Replaces: 06.2012 High-pressure pump for applications in a closed circuit up to 500 bar ize 110...280 Nominal pressure 450 bar Maximum
More informationSolutions. We Manufacture. H y d r a u l i c s. Eaton Medium Duty Piston Pump. h y d r a u l i c s
H y d r a u l i c s ydraulics Eaton Medium Duty Piston Pump h y d r a u l i c s Model 70122, 70422, 70423, and 70523 or -Flow Compensated Piston Pumps We Manufacture April 1997 Solutions S o l u t i o
More informationAxial piston variable pump A10VO Series 32
Axial piston variable pump A10VO eries 32 RE 92705 Edition: 06.2016 Replaces: 01.2012 Optimized medium pressure pump for powerful machines izes 45 to 180 Nominal pressure 280 bar Maximum pressure 350 bar
More informationAP212 Gear Pumps. Standard and Low Noise series. Reference: 200-P EN-03 1/60. Issue:
Gear Pumps Standard and Low Noise series Reference: 2-P-99123-EN-3 Issue: 9.215 1/6 Contents Page 1 General information... 4 1.1 External gear pumps components... 5 1.2 Example of typical sound pressure
More informationCONTINENTAL HYDRAULICS PVER VANE PUMPS
CONTINENTAL HYDRAULICS PVER VANE PUMPS 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM PVER PUMPS FEATURES AND BENEFITS The PVER series vane pumps are variable
More informationSeries PHP10 Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable
More informationAxial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 02.2017 Replaces: 07.2016 High-pressure pump for applications in a closed circuit up to 500 bar ize 110...280 Nominal pressure 450 bar Maximum
More information