HYDRAULIC MOTORS EPMT
|
|
- Jeremy Jefferson
- 6 years ago
- Views:
Transcription
1 HYDRAULIC APPLICATION Conveyors; Metal working machines; Machines for agriculture; Road building machines; Mining machinery; Food industries; Special vehicles; Plastic and rubber machinery etc. CONTENTS Specification data Function diagrams Dimensions and mounting Shaft extensions Dimensions and mounting- S, V Internal Spline data Permissible shaft loads Tacho connection Order code OPTIONS Model- Disc valve, geroler; Flange with wheel mount; Short motor; Tacho connection; Side and rear ports Shafts- straight, splined and tapered; Metric and BSPP ports; Other special features. GENERAL Displacement, [cm /rev.] Max. Speed, [RPM] Max. Torque, [danm] Max. Output, [kw] Max. Pressure Drop, [bar] Max. Oil Flow, [l/min] Min. Speed, [RPM] Permissible Shaft Loads, [dan] Pressure fluid O Temperature range, [C] 2 Optimal Viscosity range, [mm /s] Filtration 161, ,2, P =1700; P =00 rad Mineral based- HLP(DIN 51524) or HM(ISO 674/4) ISO code /16 (Min. recommended fluid filtration of 25 micron) a Pressure drop (bar) Oil flow in drain line Viscosity 2 (mm /s) 5 5 Oil flow in drain line (l/min) 1,5 1 2 Pressure Losses P bar Q, l/min 86
2 SPECIFICATION DATA Type Displacement [cm /rev.] Max. Speed, [RPM] Max. Torque [danm] Max. Output [kw] Max. Pressure Drop [bar] Max. Oil Flow [l/min] Max. Inlet Pressure [bar] Max. Return Pressure without Drain Line or Max. Pressure indrainline,[bar] Max. Return Pressure with Drain Line [bar] peak** int.* peak** peak** peak** 0-0 RPM 0-00 RPM >00 RPM 0-max. RPM 161, , Max. Starting Pressure with Unloaded Shaft, [bar] Min. Starting Torque [danm] Min. Speed***, [RPM] Weight, [kg] at max. press. drop at max. press. drop W S V , , ,5 22,5 15,5 11,5 251, , , , , , , , , 27, , ,2 26, , * Intermittent operation: the permissible values may occur for max. % of every minute. ** Peak load: the permissible values may occur for max. 1% of every minute. *** For speeds of 5 RPM lower than given, consult factory or your regional manager. 1) Intermittent speed and intermittent pressure must not occur simultaneously. 2) Recommended filtration is per ISO cleanliness code /16. A nominal filtration of 25 micron or better. ) Recommend using a premium quality, anti-wear type mineral based hydraulic oil, HLP(DIN51524) or HM(ISO674/4). If using synthetic fluids consult the factory for alternative seal materials. 4) Recommended minimum oil viscosity 1 mm²/s at 50ºC. 5) Recommended maximum system operating temperature is 82ºC. 6) To assure optimum motor life fill with fluid prior to loading and run at moderate load and speed for -15 minutes. 87
3 160 FUNCTION DIAGRAMS 0 The function diagrams data was collected at back pressure 5 bar and oil with viscosity of 2 mm²/s at 50 C. 88
4 FUNCTION DIAGRAMS 15 89
5 0 FUNCTION DIAGRAMS 500 The function diagrams data was collected at back pressure 5 bar and oil with viscosity of 2 mm²/s at 50 C. 90
6 DIMENSIONS AND MOUNTING DATA Port A Port B Porting Side Ports Mounting Square Mount (4 Holes) C T P (A,B) P (A,B) E Rear Ports plugged W Wheel Mount Port A Port B T Standard Rotation Viewed from Shaft End Port A Pressurized - CW Port B Pressurized - CCW Reverse Rotation Viewed from Shaft End Port A Pressurized - CCW Port B Pressurized - CW C: 4xM- mm depth P (A,B): 2xG/4 or 2xM27x2-17 mm depth T: G 1/4 or M14x1,5-12 mm depth (plugged) Type L, mm ,5 260 Type E 160 E 0 E E 15 E 0 E 500 E 60 E 725 L, mm ,5 270 L,mm 2 Type L, mm Type L, mm L,mm 2 *L 1, mm ,5 W 160 W 0 W W 15 W 0 W 500 W 60 W ,5 19 WE 160 WE 0 WE WE 15 WE 0 WE 500 WE 60 WE , , ,5 21,5 27,8 7,0 47,5 61,5 72,5 86,5 * The width of the gerolor is,5 mm greater than L. 1 91
7 SHAFT EXTENSIONS C -ø straight, Parallel key A12x8x70 DIN 6885 Max. Torque 12,8 danm K -tapered 1:, Parallel key B12x8x28 DIN 6885 Max. Torque,7 danm S=46 Tightening Torque 50± danm max 114 max 114 -ø1½" straight, Parallel key "x CO 8 8 "x 2¼" BS46 Max. Torque 12,8 danm SH -ø1½" splined 17T, DP 12/24 ANSI B Max. Torque 12,8 danm max 114 max 114 SL -ø4,85 p.t.o. DIN 9611 Form 1 Max. Torque 77 danm - Motor Mounting Surface max 14 92
8 DIMENSIONS AND MOUNTING DATA - S and V max L T Port A Port B Porting Side Ports Mounting S - Short Mount C 4xø14,2 max 6,1 min 2,9 P (A,B) "O" Ring x T 8±0,2 P (A,B) 72±0,2 E Rear Ports plugged V - Very Short Mount Port A max 25 Standard Rotation Viewed from Shaft End Port A Pressurized - CW Port B Pressurized - CCW Port B max L Reverse Rotation Viewed from Shaft End Port A Pressurized - CCW Port B Pressurized - CW 72±0,2 Drain port max L "O" Ring 0x +0,5 90,5-1,6 C: 4xM- mm depth P(A,B) : 2xG/4 or 2xM27x2-17 mm depth T: G ¼ or M14x1,5-12 mm depth (plugged) Type S 160 S 0 S S 15 S 0 S 500 S 60 S 725 L, mm ,5 216 Type SE 160 SE 0 SE SE 15 SE 0 SE 500 SE 60 SE 725 L, mm ,5 226 L,mm 2 Type L, mm Type L, mm L,mm 2 *L 1, mm ,5 167 V 160 V 0 V V 15 V 0 V 500 V 60 V ,5 171 VE 160 VE 0 VE VE 15 VE 0 VE 500 VE 60 VE , ,5 16,5 56,5 21,5 62,8 27,8 72 7,0 82,5 47,5 96,5. 61,5 4 72,5 121,5 86,5 * The width of the gerolor is,5 mm greater than L. 1 9
9 DIMENSIONS OF THE ATTACHED COMPONENT S ø92 +1 F: Oil circulation hole G: Internal drain channel H: Hardened stop plate I: O- Ring xmm 0 J: 4xM12-18 mm depth, 90 T: Drain connection G1/4 or M14x1,5 V Four depth min F: Oil circulation hole G: Internal drain channel H: Hardened stop plate I: O- Ring 0xmm DRAIN CONNECTION A drain line ought to be used when pressure in the return line can exceed the permissible pressure. It can be connected: - For S at the drain port of the motor; - For V at the drain connection of the attached component. The maximum pressure in the drain line is limited by the attached component and its shaft seal. The drain line must be possible for oil to flow freely between motor and attached component and must be led to the tank. The maximum pressure in the drain line is limited by the attached component and its seal. 94
10 INTERNAL SPLINE DATA FOR THE ATTACHED COMPONENT Standard ANSI B , class 5 [m=2.1166; corrected x.m=+1,0] Fillet Root Side Fit mm Number of Teeth z 16 Diametral Pitch DP 12/24 Pressure Angle 0 O Pitch Dia. D,8656 Major Dia. Dri 8,4 +0,4 Minor Dia. Di 2,15 +0,04 Space Width [Circular] Lo 4,516±0,07 Fillet Radius Rmin 0,5 Max. Measurement between Pin L 26,9 +0, Pin Dia. d 4,85±0,001 L Hardening Specification: HRC 60±2 HRC 52 0,7±0,2 mm effective case depth Material MoCr4 DIN 17 or better PERMISSIBLE SHAFT LOADS The output shaft runs in tapered bearings that permit high axial and radial forces. Curve " 1" shows max. radial shaft load. Any shaft load exceeding the values quoted in the curve will seriously reduce motor life. The two other curves apply to a B bearing life of 000 hours at 0 RPM. P rad (dan) Pa=0 Pa=00 dan 00 0 max (mm) Pa =00 dan max max 181 Pa =00 dan max 95
11 WITH TACHO CONNECTION ORDER CODE Pos.1 - Mounting Flange S V W Pos.2 - Port type E - Side ports - Rear ports Pos. - Displacement code Pos.4 - Shaft Extensions* C CO K SL SH - Square mount, four holes - Short mount - Very short mount - Wheel mount ,1[cm /rev] 0-1,4[cm /rev] - 251,8[cm /rev] 15-26,[cm /rev] 0-4,9[cm /rev] ,6[cm /rev] ,[cm /rev] (without Function diagram) ,0[cm /rev] (without Function diagram) - ø straight, Parallel key A12x8x70 DIN ø1½ straight, Parallel key / 8 x / 8 x2¼ BS46 - ø45 tapered 1:, Parallel key B12x8x28 DIN ø4,85 p.t.o. DIN 9611 Form 1 - ø1½" splined 17T ANSI B Pos. 5 - Ports - BSPP (ISO 228) M - Metric (ISO 262) Pos. 6 - Speed Monitoring T Pos. 8 - Rotation R - Standard Rotation - Reverse Rotation Pos. 9 - Option (Paint)** P PC - no Paint - Painted - Corrosion Protected Paint Pos. - Design Series - none - with tacho connection Pos. 7 - Special Features LL LSV - none -Low Leakage - Low Speed Valve - Factory specified (only for side ports) NOTES: * The permissible output torque for shafts must be not exceeded! ** Color at customer's request. The hydraulic motors are mangano-phosphatized as standard. 96
HYDRAULIC MOTORS EPMS
HYDRAULIC EPMS APPLICATION» Conveyors;» Metal working machines;» Machines for agriculture;» Road building machines;» Mining machinery;» Food industries;» Special vehicles etc. CONTENTS Specification data...
More informationHYDRAULIC MOTORS EPMS - series 3
HYDRAULIC EPMS - series APPLICATION» Conveyors» Metal working machine» Machines for agriculture» Road building machines» Mining machinery» Food industries» Special vehicles etc. CONTENTS Specification
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MH APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC RW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC HW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationHYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationHYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS
HYDRAULIC APPLICATION Conveyors Textile machines Mining machinery Machine tools Ventilators Construction plant equipment and access platforms etc. CONTENTS Specification data... 5 Function diagrams...
More informationHEAVY DUTY HYDRAULIC MOTORS
HEAVY DUTY HYDRAULIC MTRS CNTENTS Page Hydraulic Motors Series MSWM... 4 Hydraulic Motors Series MTK... 8 Hydraulic Motors Series MTM... 17 Hydraulic Motors Series TMF... 9 Hydraulic Motors Series MVM...
More informationHYDRAULIC MOTORS EPM. Cutaway of EPM Motor. Cutaway of EPMN Motor. EPM, EPMW(N) Series with Check Valves A. EPM 25, 32, 40 Series without Check Valves
HYDRAULIC EPM The series of EPM motors have a low speed, high torque capability. Converting hydraulic energy into mechanical energy they are used where the power up to 11 kw is needed. These units provide
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MP APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationHYDRAULIC MOTORS EPRM
HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS
More informationPlanetenmotor Serie MP
Planetenmotor Serie MP Bestellnr. Typ Code - Planetenmotor 25ccm-W:Ø25-HD MP25CD -5 Planetenmotor 2ccm-W:Ø25-HD MP2CD -1 Planetenmotor 9,7ccm-W:Ø25-HD MP4CD -115 Planetenmotor 49,5ccm-W:Ø25-HD MP5CD -1
More information» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;
HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS
More informationHYDRAULIC MOTOR-BRAKE B/MR
HYDRAULI APPLIAION onveyors Feeding mechanism of robots and manipulators Metal working machines extile machines Agriculture machines Food industries Mining machinery etc. ONENS Specification data... 22
More informationUŽSISAKYK internetu - el. paštu - telefonu
HYDRAULIC UŽSISAKYK internetu - www.dominga.lt/eshop el. paštu - info@dominga.lt telefonu - +70 52 2221 APPLICATION»»»»» Conveyors Textile machines» Mining machinery Machine tools Ventilators Construction
More informationHEAVY DUTY HYDRAULIC MOTORS
HEAVY DUY HYDRAULIC MRS CNENS Page Hydraulic Motors Series MLHSEM... 4 Hydraulic Motors Series MK... 8 Hydraulic Motors Series MLHM... 17 Hydraulic Motors Series MF... 9 Hydraulic Motors Series MVM...
More informationSPOOL VALVE HYDRAULIC MOTORS
SPOOL VALVE HYDRAULIC The operating principle of the motors is based on an internal gear design, consisting of a stator and rotor through which the output torque and speed are transmitted. The distributor
More information» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;
HYDRAULIC HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery
More informationHYDRAULIC MOTORS HP APPLICATION GENERAL. » Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines
HYDRAULIC HP APPLICAION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» extile machines» Agricultural machines» Food industries» Grass cutting machinery etc. CONENS Specification
More informationDISC VALVE HYDRAULIC MOTORS
LHS LH LHV DISC VALVE HYDRAULIC CONENS Page Hydraulic otors Series LHS... 4 Hydraulic otors Series LH... 2 Hydraulic otors Series LHV... 9 Hydraulic otors Series LHHW... 1 otor Special Features... 7 otors
More informationSPECIAL HYDRAULIC MOTORS AND MOTOR-BRAKES
SPECIAL HYDRAULIC AND MTRBRAKES CNTENTS Page Hydraulic Motors Series HP... Hydraulic Motors Series HR...11 Hydraulic Motors Series MLHRW...1 Hydraulic Motors Series...2 Hydraulic Motorbrakes Series BHR...3
More informationHYDRAULIC MOTORS INDEX HYDRAULIC MOTORS. APPLICATION SPECIFICATION AND GENERAL INFORMATION. General-01 General-02
HYDRAULIC MOTORS INDEX HYDRAULIC MOTORS MOTOR TYPE OM.. OM-1 OM- MOTOR TYPE OP.. OP-1 OP-17 MOTOR TYPE OP..NA... OP..NA-1 OP..NA- MOTOR TYPE OZ.. OZ-1 OZ-2 MOTOR TYPE OR.. OR-1 OR-17 MOTOR TYPE OK.. OK-1
More informationHYDRAULIC DISC BRAKES LB, LBS, LBV- Wet
HYRULI IS S LB, LBS, LBV- Wet PPLITION» Heavy uty machinery» Wheel drives» Material handling» Mining» gricultural machines» onveyors» oor openers and swing drives etc. GENERL Fluid type O O Temperature
More informationHydraulic motor type MM. Hydraulic motor type MR SPOOL VALVE HYDRAULIC MOTORS. Quality assured company - ISO 9001 Certified
SOOL VALVE HYDAULI MOOS Quality assured company - ISO 9001 ertified SOOL VALVE - he distributor valve has been integrated with the output shaft. he valve has hydrodynamic bearings, and has infinite life
More informationHYDRAULIC MOTORS GENERAL INFORMATION
GENERAL INFORMATION MGL... Document: HM-1-Dec 2012 Applications: -Agricultural harvesters and seeders -Conveyors -Machine tools -Food industries -Turn equipment -Brush drivers -Sweepers and floor polishers
More informationOMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Yes Yes Yes Yes Yes Yes Standard Yes Yes Yes Yes Yes Yes P.t.o. Yes Yes
More informationHYDRAULIC DISC BRAKES LB, LBS, LBV- Wet
HYRULI IS S LB, LBS, LBV- Wet PPLITION» Heavy uty machinery» Wheel drives» Material handling» Mining» gricultural machines» onveyors» oor openers and swing drives etc. GENERL Fluid type O O Temperature
More informationHYDRAULIC DISC BRAKES LB, LBS, LBV- Wet
HYRAULI IS S LB, LBS, LBV- Wet APPLIAION» Heavy uty machinery» Wheel drives» Material handling» Mining» Agricultural machines» onveyors» oor openers and swing drives etc. GENERAL Fluid type O O emperature
More informationTMF 600 ( cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationUS version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
More informationOrbital Motors OMS, OMT and OMV Orbital Motors
MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 214 Converted
More informationHYDRAULIC MOTORS EPMSY
HYDRAULIC NEW is the ew hydraulic motor i a family of "disc valve" series which has dimesios ad moutig data the same as at hydraulic motors type EPS. This motor is described with % hidger techical data-max.
More informationTPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationCONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...
CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (E2) 4 Bolt Square (E4)
Gerolor Motors BMRS Series Size CC-A Flange Options-B Shaft Options-C Ports Features 100 100 1 1 1 1 200 200 2 3 2 3 3 3 SAE A 2 Bolt - (E2) 4 Bolt Square (E4) 1-1/4" Keyed (G) 32mm Keyed (B) 1-1/4' 14T
More informationACCESSORIES CONTENTS. HYDRAULIC DISC BRAKE for MP, MR and MS type LB/
ESSORIES ONTENTS age HYDRULI DIS RKE for M, MR and MS type L/288... 3 HYDRULI DIS RKE for MSS type LS/289(290) and MSV type LV/289(290)... 6 HYDRULI DIS RKE for MTS type LS/314(315) and MTV type LV/314(315)...
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationRE / Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW. Hydraulik Nord. Contents 1/26
RE14 6/3.96 Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW RE 14 6/3.96 Standard motor type GMS Standard motor type GMT Short motor type GMTS Contents Name page Characteristics,
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationC9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic
More information6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More informationVariable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
More informationENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More information6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
More informationAPPLICATION. » Metal working machine» Machines for agriculture» Road building machines» Mining machinery» Food industries. P bar
HYDRAULIC S APPLICATION» Coveyors» etal workig machie» achies for agriculture» Road buildig machies» iig machiery» Food idustries» Special vehicles etc. CONTENTS Specificatio data... 6 Fuctio diagrams...
More informationYMTE SPECIFICATION DATA
SPECIFICATION DATA For individual motor performance charts consult equivalent YMT series data DISTRIBUTION TYPE GEOMETRIC DISPLACEMENT MAX. SPEED RPM MAX. TORQUE [IN. LB.] N*M MAX. OUTPUT [HP] KW MAX.
More informationDisplacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor
HP30 Motor Design code -003 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for performance For the past 55 years, Char-Lynn has been recognized as the
More informationOMP Hydraulic Motor Versions
Versions VERSIONS Mounting flange Shaft Port size European version US version Side port version End port version Flange port version G 1 /2 X X X No No OMP Cyl. 25 mm G 1 /2 X X X Yes No OMP G 1 /2 X X
More informationMOMV SERIES HYDRAULIC MOTOR
MOMV SERIES HYDRAULIC MOTOR MOMV series motor adapt the advanced Geroler gear set designed with disc distribution flow and high pressure.the unit can be supplied the individual variant in operating multifunction
More informationVIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (E2) 4 Bolt Square (E4)
Gerolor Motors Series ist Price Size CC-A Flange Options-B Shaft Options-C Ports Features 100 100 1 1 1 1 0 0 0 0 3 3 0 0 4 4 SAE A 2 Bolt - (E2) 4 Bolt Square (E4) 1-1/4" Keyed (G) 32mm Keyed (B) 1-1/4'
More informationHYDRAULIC MOTORS MH APPLICATION GENERAL. » Agriculture machines» Food industries» Mining machinery etc. » Conveyors
HYDRAULIC APPLICATION» Coveyors» Feedig mechaism of robots ad maipulators» etal workig machies» Textile machies» Agriculture machies» Food idustries» iig machiery etc. CONTENTS Specificatio data... 77
More information镇江液压件厂有限责任公司 BMV SERIES HYDRAULIC MOTOR BMV 315 BMV 400 BMV 500 BMV 630 BMV 800 BMV
BMV SERIES HYDRAULIC MOTOR BMV series motor adapt the advanced Geroler gear set designed with disc distribution flow and high pressure.the unit can be supplied the individual variant in operating multifunction
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationOMEW Hydraulic Motor Versions
Versions VERSIONS Mounting flange Wheel Shaft Port size European version US version Clockwise shaft rotation (CW version) 1) Counter clockwise shaft rotation (CCW version) 1) Tapered 35 mm G 1 /2 X X X
More informationVINCKE HYDRAULIC PUMPS
: VNK BA10VS 21 Variable displacement axial piston pump of swashplate design for hydraulic open circuit systems. Flow is proportional to drive speed and displacement. It can be infinitely varied by adjustment
More informationHYDRAULIC MOTORS MLHT
HYDRAULIC OORS LH APPLICAION» Coveyors» etal workig machies» Agriculture machies» Road buildig machies» iig machiery» Food idustries» Special vehicles etc. CONENS Specificatio data...... 26 27 Performace
More informationTXV - Characteristics
TXV - Characteristics TXV pumps are available in 11 models from to 150 cc/rev maximum displacement. Pump reference Direction of rotation Maximum displac. (1) Max. operating pressure Max. peak pressure
More informationEaton Char-Lynn Low Speed, High Torque Motors. Orbit motor
Eaton Char-Lynn Low Speed, High Torque Motors Orbit motor Table of Contents Description Page No. H & S Series 3 Features 3 Model code 3 H Series 4-9 Specifications 4 Performance 5 Dimensions and mount
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4)
Gerolor Motors S Series Size CC-A Flange Options-B Shaft Options-C Ports Features S S S S S S S S2 2 S31 31 S0 0 SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4) 1.0" Keyed (R) mm Keyed (A) 1.0'
More informationYMSY. Advanced design in disc distribution flow,which can automatically compensate in operating with high volume efficiency and long life.
The series motors adapts an advanced ROLLER gear set designed with disc distribution flow and high pressure. This motor series uses the ROTOR gear type manufactured with most advanced technology and quality
More informationSpool Valve Hydraulic Motors Series J
Spool Valve Hydraulic Motors Series J 10.201 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.201 EN EATON_Motoren J Series english J Series Highlights Thrust Bearing Bushing Port B Port
More informationJ Series (129-) Highlights
Highlights Features: Constant clearance Geroler set Integrated check valves Thrust Bearing Bushing Port B Port A Self-lubricating shaft bushing High-strength rigid components Increased valve seal lands
More informationVane motor high performance hydraulic series M5B - M5BS - M5BF
Vane motor high performance hydraulic series M5B - M5BS - M5BF Publ. 2 - AM172 - B 1 / 25 / FB Replaces : 2 - AM172 - A L11-2172 - 2 CHARACTERISTICS - M5B* SERIES LOW NOISE MOTOR 12 vanes and a patented
More informationVariable displacement axial piston pumps,
LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar
More informationHydraulic Motor BMT & BMTS
UID CMPNENTS, INC. Hydraulic Motor BMT & BMTS The BMT & BMTS series motors adapt the advanced RRTRC gear set design with DISC distribution flow and high pressure. These motors can be supplied with various
More informationOrbital Motors OMS, OMT and OMV Orbital Motors
MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 2014 Converted
More informationAP212 Gear Pumps. Standard and Low Noise series. Reference: 200-P EN-03 1/60. Issue:
Gear Pumps Standard and Low Noise series Reference: 2-P-99123-EN-3 Issue: 9.215 1/6 Contents Page 1 General information... 4 1.1 External gear pumps components... 5 1.2 Example of typical sound pressure
More informationÀ cylindrée fixe Gamme MAP 50
pplications Moteur à pistons axiaux M+S À cylindrée fixe Gamme MP Cylindrée de 6,6 à cm Vitesse de rotation maxi de tmin Couple maxi danm Puissance maxi 6 Kw ébit d huile maxi : 9 lmin Charge axiale maxi
More informationINDEX. YOUNG DANFOSS EATON M & S YMM OMM J MLHM YMP OMP - MLHP YMPW - YMR OMR - MLHR YMH - YMSE YMSS OMSS -
INDEX SECTION PAGE YOUNG DANFOSS EATON M & S YMM OMM J MLHM YMP OMP MLHP YMPH OMPW DH H HP YMPW MLHPW YMR OMR MLHR YMRS OMH DS S HR YMH MLHH YMSY OMS 2 ALT MLHS/MLHSY YMSE 2 YMSS OMSS MLHSS YMSJ 2 bearingless
More informationAP212HP Cast Iron Gear Pumps
Cast Iron Gear Pumps Standard and Low Noise series Reference: 200-P-991236-EN-01 Issue: 09.2016 1/56 Contents Page 1 General information... 5 1.1 External gear pumps components... 6 1.2 Technical data...
More informationSpool Valve Hydraulic Motors. Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds.
Spool Valve Hydraulic Motors Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i Spool Valve Motors Highlights Product Description Char-Lynn spool
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationRE / Gerotormotors (Low Speed High Torque Motors) Type GMP, GMR, GMVD. Hydraulik Nord. Contents 1/32. Replaces:
Gerotormotors (Low Speed High Torque otors) Type GP, GR, GVD RE 14 7/3.96 RE 14 7/11.96 Replaces: 3.96 Characteristics: Very smooth running, even at low speeds Wide speed range Constant output torque over
More information5.2 MEDIUM HEAVY DUTY SERIES SIZE 3
.2 MEDIUM HEAVY DUTY SERIES SIZE 3 CONTENTS PGI101 Ordering Code.2.1 Medium Heavy Duty Series Technical Information.2.2 Specifications.2.3 Hydraulic fluids.2.4 Viscosity range.2. Temperature range.2.6
More informationVariable displacement axial piston pumps,
ariable displacement axial piston pumps, for open circuit DISPLACEMENTS From To 2.75 in 3 /rev (45 cm 3 /rev) 5.12 in 3 /rev (84 cm 3 /rev) MAX SPEED 3000 min -1 PRESSURE Max. continuous Max. intermittent
More informationKawasaki Motors Corp., U.S.A. Precision Machinery Division. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HM(HD)B 270 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3
More informationKawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
More information4.2 FIXED DISPLACEMENT DOUBLE PUMP
4.2 FIXED DISPLACEMENT DOUBLE PUMP CONTENTS PVF101 Ordering Code 4.2.1 Fixed Displacement Technical Information 4.2.2 Specifications 4.2.3 Hydraulic fluids 4.2.4 Viscosity range 4.2.5 Temperature range
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationKawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
More informationHYDRAULIC DISC BRAKES LB, LBS, LBV- Wet
HYRULI IS BRKES LB, LBS, LBV Wet PPLITIN» Heavy uty machinery» Wheel drives» Material handling» Mining» gricultural machines» onveyors» oor openers and swing drives etc. GENERL Fluid type Temperature range,
More informationPVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS
PVX-11 VANE PUMPS VARIABLE DISPLACEMENT, COMPENSATED NOTE: See pages thru 14 for PVX-11 dimensions. PERFORMANCE SPECIFICATIONS Displacement (Nominal) 1.5 in 3 /rev. (25 cm 3 /rev.) Displacement (Actual)
More informationChar-Lynn HP 30 Motor
Char-Lynn HP 30 Motor Displacements cm 3 /r (in 3 /r) 344 (21.0) 400 (24.4) 434 (26.5) 480 (29.3) 677 (41.3) Engineered for Performance For the past 45 years, Char-Lynn has been recognized as the industry
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationOrbital Motors Type OMP, OMR and OMH. Technical Information
Orbital Motors Type OMP, OMR and OMH Technical Information OMP, OMR and OMH A Wide Range of Hydraulics Motors F 301 245 A Wide Range of Hydraulic Motors Sauer-Danfoss is a world leader within production
More informationVickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
More informationExternal gear pump Series G
External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps
More informationAxial Piston Fixed Motor A2FM
Axial Piston Fixed Motor A2FM RE 91001/06.2012 1/46 Replaces: 09.07 Data sheet Series 6 Size Nominal pressure/maximum pressure 5 315/350 bar 10 to 200 400/450 bar 250 to 1000 350/400 bar Open and closed
More informationFixed Displacement Motor A10FM A10FE
Electric Drives and Controls Hydraulics inear Motion and ssembly Technologies Pneumatics Service Fixed Displacement Motor 10FM 10FE RE 91 172/06.06 1/24 Replaces: 01.03 Technical Data Sheet Size 10...63
More information5.1 MEDIUM HEAVY DUTY SERIES SIZE 2
.1 MEDIUM HEAVY DUTY SERIES SIZE 2 CONTENTS PGI100 Ordering Code.1.1 Medium Heavy Duty Series Technical Information.1.2 Specifications.1.3 Hydraulic fluids.1.4 Viscosity range.1. Temperature range.1.6
More informationAxial piston pumps type PVPC variable displacement, by a full line of mechanical controls
www.atos.com Table A600/E Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls PVPCCH4046 PVPC are variable displacement axial piston pumps for high pressure operation,
More informationVIS 40 Series Two-speed
Specifications Back Pressure Relief Shuttle Selector Plate Plate Balance Plate Face Seal Mounting Flange End Cap Front Retainer Seal Guard Output Shaft Selector Geroler Drive Bearings Shaft Seal VIS 40
More informationVane motors Single & double zm21 M3B - M4 / M4S series
Vane motors Single & double zm21 M3B - M4 / M4S series Publ. 2 - AM 157 - B 07 / 97 / FB Replaces : 2 - AM 157 - A CHARACTERISTICS - M3* AND M4* SERIES HIGH STARTING TORQUE EFFICIENCY HIGH VOLUMETRIC EFFICIENCY
More information