Z Tube O.D. Slze. Min
|
|
- Lindsay Flowers
- 5 years ago
- Views:
Transcription
1 S Fittgs kok S Straigt Og Seal Fittgs are of positionable feature and provide connection tube to straigt tread boss. Furter tis as an advantage of elimatg weldg and brazg process wen used as bulkead fittg on t wall tanks or vessels. ese fittgs are designed and manufactured to S standards as below: Male or xternal Fittg nd imensions to S J54 Straigt tread to S J475 (equivalent to NSI, or ISO 725) Female or Internal Straigt read oss to SJ926. See diagram below. U I 0.00 (0.25) 0.05 (0.375) Z ª ¾5 ª S Internal Straigt read oss Y O ecommended spotface dia is surface sall be square wit te tread pitc dia wit 0.00(0.25) FI. Wen measured at 0 dia. S Og position after Installation ock Nut ackup Waser P J Q M boss eigt Iis dim applies only wen tap drill can not pass tru entire boss. Og etails of S Internal Straigt read oss Unit:mm Nomal read J O Pd Ua Sbc Yc Z ube O.. Slze M. M. ( 0.2) M. M. (+0.3 ) Max ( ) /8 5/ /6 /4 5/6 3/8 3/824 7/620 /220 9/ /2 3/ /8 7/ /4 / /8 3/ / /4 5/ /2 7/ / a. iameter U sall be concentric wit te tread pitc diameter wit 0.3 full dicator readg (FI) and sall be free from longitudal and spiral tool marks. nnular tool marks up to 2.5 Micro meters max. sall be permissble. b. is is te Maximum recommended spotface dept to permit sufficient wrenc grip for te proper tigteng of te fittg or locknut. c. If te face of te boss is on a maced surface, dimensions Y and S need not apply as long as 0.25/ is mataed to avoid damage to te O g durg stallaton. d. ap drill depts given require te use of bottomg taps to produce te specified full tread lengts. Were standard taps are used, te tap drill depts must be creased accordgly. Og and straigt tread size for S Fittgs osses Nomal ube O.. /8 3/6 /4 5/6 3/8 /2 5/8 3/4 7/8 /4 /2 2 Port Size read Size 5/624 3/824 7/620 /220 9/68 3/46 7/84 /62 3/62 5/62 5/82 7/82 2/22 Size No O g I.. c Cross Section c Installation Instruction Step. nsure te locknut is fully raised. Step 2. ubricate te Og wit a ligt oil or petroleum and turn te fittg to te straigt tread boss until te metal waser is contact wit te boss Step 3. Position te fittg by backg it out (not more tan turn counterclockwise)until te kok fittg is oriented te desired direction. Step 4. Wit a back up wrenc, old te wrenc pad and tigten te locknut until te waser is set agast te face of te boss. 46
2 S Male Connector MCS Connects fractional tube to S straigt tread boss ube O.. mm Straigt read (u) M. Widt across flat mm mm Og Unifom MCS 22U / / /6. 7/ MCS 44U MCS 46U MCS 48U /4 /4 /4 7/620 9/68 3/46 9/6 /6 7/ /6 9/6 9/ MCS 40U /4 7/ / MCS 55U 5/6 3 / / / MCS 64U 3/ / / / MCS 66U 3/ /68 7. / / MCS 68U 3/ / / / MCS 60U 3/ / / MCS 86U / / / / MCS 88U / / / / MCS 80U / / / MCS 82U / / / / MCS 08U 5/ / / MCS 00U 5/ / MCS 28U 3/ / / / MCS 22U 3/ / / / MCS 44U 7/ / / / MCS 62U / / / MCS 66U / / / MCS 2020U / / / / MCS 2424U / / / / MCS 3232U / / Og S Male lbow S Og Connects fractional tube to S straigt tread boss ube O.. Straigt Widt across flat O g read Unifom mm (u) M. S 44U /4 7/620 / / / S 55U 5/6 3 / / / / S 66U 3/ / / / / S 68U 3/ / / / / S 88U / / / / / S00U 5/ / S22U 3/ / / / / S44U 7/ / / / / S66U / / / / S 2020U / / / / / S 2424U / / / / S 3232U / / /
3 45o 45 S Male lbow S Connects fractional tube to S straigt tread boss ube O.. Straigt Widt across flat Og read Uniform mm (u) M. S 44U /4 7/620 / / / S 66U 3/ / / /6 7.46/ S 88U / / / / / S22U 3/ / / / / S66U / / / / Og Og S Male un ee S Connects fractional tube to S straigt tread boss ube O.. Straigt Widt across flat Og read Unifom mm (u) M. S 44U /4 7/620 / / / S 66U 3/ / / /6 7.46/ S 88U / / / / / S22U 3/ / / / / S66U / / / / S 2020U / / / / / S 2424U / / / / S 3232U / / / S Male ranc ee S Og Connects fractional tube to S straigt tread boss ube O.. Straigt Widt across flat Og read Uniform mm (u) M. S 44U /4 7/620 / / / S 66U 3/ / / / / S 88U / / / / / S22U 3/ / / / / S66U / / / / S 2020U / / / / / S 2424U / / / / S 3232U / / /
4 OSeal Connector kok Org seal fittgs provide leaktigt sealg on bot vacuum and ig pressure wit a smoot & flat surface perpendicular to te treaded port to ensure metal to metal contact. e standard una N Org is contaed a precision groove to prevent Org extrusion at ig pressure and for a controlled squeeze a vacuum service. aised Port Counterbored Port ecessed Port /8 Fig. Fig. 2 Fig. 3 C Mountg imensions for Oseal connectors kok Straigt read Pipe read iameter ept C M. M. M. Max. Max. Inc mm Inc mm Inc mm Inc mm Inc mm COS 22U 5/ COS 33U 3/ COS 44U 7/ COS 55U / COS 66U 9/ COS 88U 3/ COS22U / COS66U 5/ COP 22 /8 NP COP 42 /8 NP COP 44 /4 NP COP 66 3/8 NP COP 68 /2 NP COP 88 /2 NP Wen stallg an Org seal fittg:. andtigten it until te squeeze on te Org can be felt durg te last /4 turn 2. Snug te fittg ligtly wit a wrenc Wen connectg & disconnectg te tubg to te Org fittg:. Use a backup wrenc on te fittg ex so it does not turn wile te nut is beg tigtened at te tubg connection. 2. Wen disconnectg te tubg also use a backup wrenc so te fittg does not turn. 3. For a recessed port, use a t backup wrenc (/8") to old te fittg ex (Fig. 3). OSeal emperature atgs N (e.g. Perbunan ) FM (e.g. Viton ) PF (e.g. eflon ) 40 C to 0 C (40 F to 230 F) 28 C to 204 C (20 F to 400 F) 60 C to 240 C (76 F to 464 F) 49
5 OSeal Straigt read Connector COS Connects fractional tube to female straigt tread ube O.. Straigt Widt across flat Og Par t No. read Uniform mm (u) M. mm mm COS 2 2U / / / / COS 3 3U 3/ / / / COS 4 4U /4 7/620 3/ / COS 5 5U 5/6 3 /220 7/ / COS 6 6U 3/ / / / COS 8 8U / / / / COS2 2U 3/ / / / COS6 6U / / / OSeal Pipe read Connector COP Connects fractional tube to female NP tread ube O.. * ISO Paralled reads are available upon request. mm *(NP) M. Widt across flat mm mm Og Og COP 2 2N /8 3.7 / / / COP 4 2N /4 /8 3/ / COP 4 4N /4 /4 5/ / COP 6 4N 3/ /4 7. 5/ / COP 6 6N 3/ /8 7. / / COP 6 8N 3/ /2 7. 5/ / COP 8 8N / / / / Og Uniform
A VH Series. VH Series. AComparison with NSK standard products
133-5-1.2 1. eatures (1) ig-performance end seals ig-performance end seals wit a multi-lip structure prevent te entry of various foreign matters. (2) lubrication unit (standard) Outstanding lubrication
More informationA SH Series. SH Series. 2. Ball slide shape
S Series -5-1.2 S Series 1. eatures (1) ower noise and gentler tone Incorporating a retaining piece and optimizing te circulation pat enables steel ball circulation stability and te prevention of ball
More informationA LH Series. LH Series. 2. Ball slide shape
Series -5-1.1 Series are also available in randam matcing. (Special ig-carbon steel products for 15 to 45) 2. all slide sape all slide Model Sape/installation metod ype (Upper row, Rating: ower row, all
More informationA LH Series. LH Series A162. (2) Ball slide shape
Series -5-1.3 Series (2) all slide sape all slide Model Sape/installation metod ig-load type ype Super-ig-load type 1 1 (1) eatures 1. ig self-aligning capability (rolling direction) Same as te D combination
More informationNSK Linear Guides. HA Series for Machine Tools
NS inear Guides A Series for Macine ools Premier motion accuracy and rigidity innovative linear guide design, compatible wit ig precision macine tools Patent Pending Unparalleled motion accuracy, rigidity,
More informationKFD-HS. Power chucks with through-hole. Technical features:
K-S ower cucks wit troug-ole ecnical features: Wedge ook system wit annular piston for igest accuracy in case of loss of centrifugal force bove-average mecanical efficiency Very few components, long jaw
More informationTechnical Notes To DIN 933, ISO 4017.
Hexagon Head Bolts wit tread up to ead, DIN 933, 6101 d l A/F A0013.A6 6101 To DIN 933, ISO 4017. Order No. Tread l A/F Finis A0013.050-020-A6-00 M 5 20 3,5 8 unfinised A0013.050-025-A6-00 M 5 25 3,5 8
More informationQuick Connectors DQ, DQM, and DF Series
Q, QM, and F Catalog No. QF-5 January 2012 No tools required to couple and uncouple. Bi-directional flow design. Versatile options of bot-end sutoff (V), single-end sutoff (SV), and bot end open (F ).
More informationC-Lube Linear Roller Way Super MX Linear Roller Way Super X
-Lube Linear Roller ay uper Linear Roller ay uper X 14 148 Aquamarine endplate for identification of -Lube Linear ay Identifi cation number and specifi cation Te specification of and series are identified
More informationC-Lube Linear Roller Way Super MX Linear Roller Way Super X
-ube inear Roller ay uper inear Roller ay uper X 14 Aquamarine endplate for identification of -ube inear ay Identifi cation number and specifi cation Te specification of -ube inear Roller ay uper is identified
More informationM Tube Fitting Design Standards & Codes
25 M Tube Fitting esign Standards & Codes Make-up 1 1/4 turns advance NUT by 1.25 pitces from finger-tigt position. n 20 TPI, 1.25 pitces travel 1/16 in. (1.5875 mm) make-up distance for Gaugeability M
More informationDURO-NC. Power chucks with quick-acting jaw change system. Technical features:
K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted
More informationHAM-LET POSITIONABLES ELBOW & TEE
H POSOBS BO & PROUCS UP POSOBS PR S J26 S 16142 769 OB BO UB O S/S SRGH HR BOSS (POSOB)* 1 ** nformation ube O.. S/S 769OB SS 1/4 X 7/1620 769OB SS 1/4 X 9/1618 769OB SS 3/8 X 9/1618 1/4 6.35 7/1620 0.
More informationTable Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
More informationLocal solutions for individual customers worldwide STAUFF TWIN FERRULE TUBE CONNECTORS.
ocal solutions for iniviual customers worlwie SUFF WN FERRUE UE CONNECORS www.stauff.co.uk 1 well establise prouct in major inustries an applications e Stauff SUPEROK range alreay as many approvals an
More informationCrossed Roller Slides
Crossed Roller Slides ov-crossed-slides-divider - Updated - 18-09-2017 165 Linear Linear Rail Sets Overview Standard cross roller rail sets L1000 & L1001 Seven rail profiles (Sizes 1-12) Lengts: 20mm to
More informationC-Lube Linear Way MH Linear Way H MH LWH
-Lube Linear ay M Linear ay ML -Lube Maintenance ree Series -Lube Linear ay M M long term maintenance free supported! Te aquamarine end plate is te symbol of maintenance free. Identification umber and
More informationgyrolok Gyrolok Tube Fittings
yrolok ube ittings yrolok itting ocator 2 yrolok eatures & enefits 4 yrolok esign 5 ow to Order 6 Pipe hread Information 7 S ittings Information 7 yrolok itting imensional & pplication ables 8 Replacement
More informationNEW. BERMAD Irrigation 100 Series - High Performance Valves. Water Control Solutions
NE BERMAD Irrigation ig Performance Valves ater Control Solutions 100 Series Yflow ig Performance Plastic ydraulic Control Valves Features and Benefits Durable industrial grade valve design and construction
More informationTube Fittings Olivas Park Dr Unit G Ventura, CA
ube Fittings ig ecnology Valve & Flange & Fitting Series vailable in sizes from / to 2in (2mm to mm) www.superlokus.com 5777 Olivas Park r Unit G Ventura, C 90 0554 sales@superlokusa.com Our company consists
More informationgyrolok Gyrolok Tube Fittings
yrolok ube ittings yrolok itting ocator 2 yrolok eatures & enefits 4 yrolok esign 5 ow to Order 6 Pipe hread Information 7 S ittings Information 7 yrolok itting imensional & pplication ables 8 Replacement
More informationGreetings. through continuous R&D investment and strong quality control system.
Greetings We, M Co., t. are ig precision mecanical components manufacturer specialize in te fiel of utomotive, erospace, Semiconuctor, sipbuiling an petrocemical inustries since its founation in 9. We
More informationinst d u Building materials Approvals Qualities
No. Name 5 3 / 4 1 2 Material 1 Stud Zinc plated steel / A4 ( ) 2 Expansion sleeve A2 / A4 ( ) 3 Waser DIN 125A Zinc plated steel / A4 ( ) T inst t d fix f d u do SW l G No. Name l d nom ef Material 4
More informationIntroduction. Function of DIN TypeTube Fittings. Design and Construction. SUPERLOK DIN Type Tube Fitting. The SUPERLOK DIN Type Body :
Introduction UPEROK DIN ype Fitting e UPEROK DIN type fitting is a flareless metric fitting tat consists of a body, a compression ring (ferrule) and a nut, On assembly, two cutting edges of te compression
More informationSanitary Fittings & Tubing
anitary Fittgs & ubg pecifications anitary tubg is 3- approved taless steel sanitary tubg dimensions and materials conform to M 269/270 and 3- pproved taless steel plate flanges made from M 240 (Plate)
More informationKEEP IT LEVEL.
KEEP IT LEVEL Ideal for macinery and conveyor belts, our range of Pressed Bolt own Feet includes an asymmetrical base sape to improve clearance wen situating feet close to walls or walkways. For easy eigt
More informationKFD. Power chucks without through-hole. Technical features:
K Power cucks witout troug-ole Tecnical features: Proved power cuck wit ig load carrying capacity, long life and ig workolding accuracy Te operating power is transmitted by means of a sturdily dimensioned
More informationSection 8. Copper Series
Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for
More informationHAM-LET PRECISION INSTRUMENT PIPE FITTINGS
M- PRISION INSRUMN PIP IINS NR he M- Pipeline range of connectors is manufactured for typical applications in chemical and petrochemical processing plants, as well as oil, gas and power generation industries.
More informationGYROLOK. Tube Fittings
ube ittings Index YROOK itting ocator 2-7 YROOK eatures & enefits 8 YROOK esign 9 ow to Order 10 Pipe hread Information 11 S ittings Information 11 YROOK itting imensional & pplication ables 12 Replacement
More informationKFD-HE. Power chucks with through-hole
K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating
More informationKFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features:
Power cucks witout troug-ole K-EC / K--EC Tecnical features: Easy Care: low-maintenance and wear resistant Abrasionproof coating of te base jaw guidings Improofed dirt protection by integrated jaw guiding
More informationTest Coupling with Ball Check
Test 15 Connection Tread Introduction SMK15 Test Coupling wit Ball Ceck Test Coupling SMK15 Internal Ball Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast coupling for Monitoring
More information13. HYDRAULIC BRAKE SERVICE INFORMATION 13-1 XL200 BRAKE PAD/DISC 13-4 MASTER CYLINDER 13-6 BRAKE CALIPER 13-8
XL200 13. HYDRAULIC BRAKE SERVICE INFORMATION 13-1 TROUBLESHOOTING 13-2 BRAKE FLUID REPLACEMENT/ BLEEDING 13-3 BRAKE PAD/DISC 13-4 MASTER CYLINDER 13-6 BRAKE 13-8 SERVICE INFORMATION GENERAL t A contaminated
More informationNew High Pressure Coolant Capable Groove-Turning and Parting Tools
1/10 New Hig Pressure Coolant Capable Groove-Turning and Parting Tools 2/10 In order to meet te macining needs of difficult-to-cut materials suc as titanium, inconel and oter eat resistant alloys, TaeguTec
More informationVERTICAL THRUSTER PNEUMATIC SLIDE
ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series
More informationNR/NRS. LM Guide B-93. A Technical Descriptions of the Products (Separate) B Product Specifications
R/RS Guide Product Specifications Dimensional Drawing, Dimensional Table s R-R and R-R... s RS-R and RS-R... s R-A and R-A... s RS-A and RS-A... s R- and R-... s RS- and RS-... Standard engt and aximum
More informationCUTTING - BENDING - NOTCHING - NICK GRINDING
D i e r o o m E q u i p m e n t www.dieroom.com CUTTING - - NOTCHING - NICK GRINDING UC-04 CUTTING Straigt and double miter (Lipper) cutting macine. 3-4 pt Cutting eigt 23,8-50 mm Miter angle 54 (54+9
More informationINSTRUMENTATION. Tube Fittings. Catalog Number 01-5 November,
INSTRUMNTATION Tube Fittings Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee
More information...vibration isolation. Miscellaneous Parts
...vibration isolation Parts Anti-vibration Mounts engine l P2040 Rubber on silver zinc plated steel. Tecnical Notes Wit a bell-like base tis unit is suitable for supporting most applications, suc as engine
More informationType 612. , Sizes 3/8, 1/2, 3/4
escription The type 612 is a compact valve with many features which make it ideal for pharmaceutical and bio-processg applications. Sanitary iaphragm Valve Manually operated Standard Features Compact design,
More informationCUTTING - BENDING - NOTCHING - NICK GRINDING
D i e r o o m E q u i p m e n t www.dieroom.com CUTTING - - NOTCHING - NICK GRINDING UC-04 CUTTING Straigt and double miter (Lipper) 3-4 pt Cutting eigt 23,8-50 mm Miter angle 54 (54+9 double angle and
More information20 Series Tube Fittings and Tubes
20 Series Fittings and s 20,000 psi (379 bar) FIOK Group FH0204083 www.fitokgroup.com 20 Series Fittings ontents Features oned-and-hreaded onnection. Glands - G rosses - Metal-to-metal seal provides perfect
More informationBERMAD Irrigation. Technical Specifications. WW-700 & 800 Series Metric. 800 Metric
Tecnical Specifications -700 & 0 Series SI 700 Metric SI 0 Metric Available Sizes & Patterns DN - DN 0 - Y Pattern DN - DN 4 - Angle DN 600 - DN 0 - Globe Connection Standard Flanged: ISO 7005-2 (ISO,
More informationHow to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With
More informationSTERILE CONTAINER SYSTEMS
BASKET MADE FROM STAINLESS STEEL WIRE MESH WIRE BASKET WITH LID TK3-1010 TK3-1011 TK3-1012 TK3-1013 540 x 250 =35 mm 540 x 250 =55 mm 540 x 250 =75 mm 540 x 250 =105 mm TK3-1020 TK3-1021 TK3-1022 TK3-1023
More informationFRANK. Technologies for the construction industry. Stabox & Coupler. Reinforcement connection & screw connection
FRANK Tecnologies for te construction industry Stabox & Coupler Reinforcement connection & screw connection www.maxfrank.com Max Frank GmbH & Co. KG Mitterweg 1 94339 Leiblfi ng Pone +49 9427 189-0 Fax
More informationMANN+HUMMEL Fuel filters
MANN+HUMML Fuel filters 65 Application areas for MANN+HUMML fuel filters Te rapid development of diesel tecnology as made te filtration of diesel fuel before it reaces te injection system a top priority.
More informationMedium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products ISO onversion Fittings Visual Index ISO Fitting Nomenclature page 122 Typical Fastening s page 123 Forms
More informationSAE 37 Flared Tube Fittings
SAE 7 Flared Tube Fittings 7 Flared Tube SAE J5 MEETS SAE STANAR J5 If required, see SAE Standard J5 for a complete list of dimensions. NPT Tapered Pipe Treads meet te requirements of ASME/ANSIB.I.0..
More informationManifold Nozzles, Threaded Ø Company. Products. Technology. Application
eries 20 Hot 07 Runner 01 Nozzle Manifold Nozzles, readed Ø10-20 ompany roducts ecnology pplication eries 20 Manifold nozzles, treaded, open / closed / valve gate roduct type èhot Runner Nozzle, (treaded)
More informationSemiconductor / High Purity Products FITTINGS TK SCT. Weld Fittings / Metal Seal Fittings. SCT Division
Semiconductor / High Purity Products K SC IINGS Weld ittings / etal Seal ittings SC ivision K SC SUPR CN CHNOOGY ICRO W IINGS ORG W IINGS C S IINGS 2 Super Clean itting Series W and etal Seal ittings components
More informationHow to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Foreword Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed.
More informationType 625. , Maintenance-free piston actuator: Normally Open, Normally. , FDA compliant diaphragms. , Sizes 3/8-3/4
escription The type 65 is an extremely compact pneumatically actuated valve with many features which make them ideal for pharmaceutical and bio-processg applications. Sanitary iaphragm Valve Pneumatically
More informationMANN+HUMMEL Filters for Liquids
MANN+HUMML Filters for Liquids MANN+HUMML Industrial Filters Te MANN+HUMML Group is an international company wit its eadquarters in Ludwigsburg, Germany. Te group employs approx. 9500 people worldwide
More informationISO 9001 Certified Fitting and Valve Manufacturer
ASM Accredited Nuclear & ISO900 Quality System ISO 900 Certified Fitting and Valve Manufacturer Catalog Number 0- January, 00 HYRAULIC SWAGING UNIT.HS-A Hydraulic Swaging Unit for Pre-Swaging Over Certificates
More informationHAM-LET PRECISION INSTRUMENT PIPE FITTINGS
HAM-E PRECISION INSRUMEN PIPE FIINGS PRECISION INSRUMENAION PIPE FIINGS GENERA HAM-E Group is pleased to introduce its line of Precision Instrument Pipe Fittings. he Pipeline range of connectors is manufactured
More informationManifold Nozzles, Sliding Fit Ø8-20. Company. Products. Technology. Application
eries R0 Hot 07 01 Runner Nozzle Manifold Nozzles, liding Fit Ø8-0 ompany roducts ecnology pplication roduct type eries R0 Manifold nozzles, sliding fit, open / closed / valve gate Hot runner nozzle, R
More informationPyxis & Corvus. Launch brochure
Pyxis & Corvus Launc brocure Roblon Pyxis and Roblon Corvus downligts acieve uncompromising ligt quality tat is based on exceptional LED ligting tecnology. Pyxis and Corvus downligts are ideal for use
More informationAdmiralty Bronze Tube Fittings
Admiralty Bronze ube ittings One of the most comprehensive component design and manufacture packages available today to the Oil and Petrochemical Industry is offered by Safelok Components. arnessing the
More informationTecnodinAntivibrationMounts
TecnoinAntivibrationMounts Page Page 105 110 105 111 106 111 106 111 107 112 107 112 107 112 108 108 109 109 110 www.tecnoin.com 4 1 0 1 R A P I O A N T I - V I B R A T I O N M O U N T Coe e C Ce e 410108012
More informationAxial piston variable displacement pump type V60N
Axial piston variable displacement pump type V60N For commercial veicles Open circuit Nominal pressure Maximum pressure p max Geometric displacement V max = 350 bar (5075 psi) = 400 bar (5800 psi) = 90
More informationIndustrial Couplings and Fittings
Kamlok Quick Couplings: An asymmetrical coupling system, male and female parts are locked y two andles. Hose assemly for MIL-Norm couplings wit standard clamps, for DIN EN 14 420-7 couplings wit forged
More informationTHE PREMIUM QUALITY. Hydraulic Swaging Unit for Pre-Swaging Over 1. Catalog Number 01-5 March, 2009 HYDRAULICSWAGINGUNIT.
TH PRMIUM QUAITY Catalog Number 0-5 March, 009 HYRAUICSWAGINGUNIT.HS-A Hydraulic Swaging Unit for Pre-Swaging Over www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female
More informationT-nuts, jaw blanks 54 SMW-AUTOBLOK
T-nuts, jaw blanks 54 SMW-AUTOBLOK T-nuts grippers SMW-AUTOBLOK Berg Forkardt owa Kitagawa Röm Scunk ST T-nuts for cucks ST IC serration 1/16 x 90 or 3/32 x 90 Page 56 STE double T-nuts for cucks STE IC
More informationClean Fittings. No.06-2 August 2015
Clean Fittings No.06-2 ugust 205 Clean Fitting Contents Clean Weld Fittings Mini lbow WM Mini ee WM Mini Cross WMX Mini educing lbow WM Mini educing ee WM Mini educing Union WMU ong lbow W ong ee W ong
More informationFFM04 Industrial grade high accuracy turbine flow meter
FFM0 Industrial grade ig accuracy turbine flow meter New Higly Sensitive Metal SUS Ceramics Core Bearings ow loss power & pressure Power Microflow amount Precision Measurement SUS ( VS / VH ) mm ow 0 bar
More informationClass Quality Module Total Tooth Thickness Max. Feed Force per Applications (Examples) Pitch Tolerance Length Pinion Contact/
Overview of Integrated Rack 90 Arrangement 180 Arrangement Adjusting between rack and rai not necessary Space-saving and performance-optimized design can be reaized Different types of integrated racks
More informationFRANK. Stabox & Coupler. Technologies for the construction industry
FRANK Stabox & Coupler Tecnologies for te construction industry Max Frank GmbH & Co. KG Tecnologies for te construction industry Mitterweg 1 94339 Leiblfi ng Germany Pone +49 (0) 94 27 / 1 89-0 Fax +49
More informationFIXTURE PINS. Machine Tool Components D-11 E&E SPECIAL PRODUCTS 7200 MILLER DRIVE, WARREN MI (586) (586) FAX
FIXTURE PINS D-11 Tolerance Data & Standard Specifications MATERIAL TOLERANCE EAT TREAT ARDENED & ROUND 8620 PIN DIA =.001 ELOW NOMINAL +.0000 -.0005 1/2 DIA OR LESS RC 50-52.025-.035 DEEP 9/16 DIA AND
More information100% 100% 100% RECYCLABLE CUSTOM DUTCH DESIGN
% DUTCH DESIGN Our stainless steel Superline planter is a classic for public areas, offices, airports an oter places were timeless esign an urable, low-maintenance solutions for interior an exterior plants
More information* Optional PRESSURE COMPENSATOR - FLANGED TYPE B A X 2.2. Typical application VR5P with flow control valve
* Veljan 3 ports pressure compensator Valve are designed for improved operation safety and reduced mountg cost. These valves are used to mata a constant pressure drop External PD, External PP Internal
More informationlegris products are available from: Maryland Metrics
legris products are available from: Maryland Metrics 2003 2005 New Products atalog web: mdmetric.com email: sales@mdmetric.com push-to-connect fittgs 9000 safety coupler mi ball valves staless steel range
More informationEngineering Data. Assembly Length. How to Determine Correct Assembly Length
Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown
More informationStatic O-Ring Reference
63 Static Reference Industrial Static Seal Glands Male Gland Female Gland 1/2 E 1/2 E B1 Dia. (B1 Min = A Max. 2L Max.) B Dia. C Dia. D Dia. A Dia. A1 Dia. (A1 Max. = B Min. 2 L Max.) (e) 0 5 (TYP.) 32
More informationCleanfit P CPA474. Technical Information. Retractable plastic process assembly with ball valve for ph and ORP electrodes
Technical Information Retractable plastic process assembly with ball valve for ph and ORP electrodes pplication hemical dustry Wastewater / dustrial water Power plants Refuse cerators The P 474 holder
More informationAppendix ISO /03/05/07/08
ppendix ISO4401 02/03/05/07/08 Fluid Recommendations Viscosity & Cleanliness Recommendation Minimum Optimum Maximum ISO Cleanliness 6.0 cst 20 43 cst 2158 cst 20/18/15 (45 SUS) (100-200 SUS) (10000 SUS)
More informationElectric Pallet Truck with Lithium Battery
Electric Pallet Truck wit Litium Battery : CBD12W 48V large capacity maintenance-free litium battery, long working time around 6ours. Te carging time only needs 3 ours. 10 seconds replacement of te battery(two
More informationMetal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
More informationIndustrial Couplings and Fittings
Kamlok Quick Couplings: An asymmetrical coupling system, male and female parts are locked y two andles. Hose assemly for MIL-Norm couplings wit standard clamps, for DIN EN 14 420-7 couplings wit forged
More informationA New T-BURST Holder for Swiss Turning Applications
1/15 A New T-BURST Holder or Swiss Turning Applications 2/15 KEY POINT TaeguTec is pleased to introduce a new addition to te T-BURST ig pressure coolant older or swiss turning applications. Te T-BURST
More informationPneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
More informationLinear Bushing LBE LBD LBB LM LME LMB
Linear Busin LBLBLBBLMLMLMB Linear Busin is a i precision linear motion rollin uide wic travels alon a saft to acieve endless linear motion. In te external cylinder, a retainer, steel balls, etc. are compactly
More informationRaised Face. Groove/Ring Number. Face Diameter min in mm
http://www.yaang.com e-mail: sales@yaang.com BS 393 : 1960 British Standard BS 393 : 1960 - Carbon Steel Pipe s (over 4 ches nomal size) for the Petroleum Industry, covers 1 lb to 600 lb weld neck and
More informationTHE PREMIUM QUALITY. Catalog Number 01-5 November,
TH PRMIUM QUAITY Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee T Union Cross
More informationZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy
ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high
More informationZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS
The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on
More informationBROCHURE Modern Lighting Solutions. By:
Modern Ligting Solutions Corporate Office Focus Ligting & Fitures Pvt. Ltd. 1007-1010, Corporate Avenue Sonawala Road, Goregaon East Mumbai - 400 063, India. +91-22-2686 5671-5 +91-22-26-86 5676 UAE Office
More informationAccessories. Subplates and Connection Plates for Four-Port Directional Valves. Vickers. ISO 4401, 02/03/05/07/08 General Description.
Vickers ccessories Subplates and Connection lates for Four-ort Directional Valves ISO 4401, 02/03/05/07/08 General Description his range of subplates and auxiliary connection plates offers an economical
More informationUSE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationSTERILE CONTAINER SYSTEMS BASKETS
Meeting Point For Surgery BASKET MADE FROM STAINLESS STEEL WIRE MESH WIRE BASKET WITH LID K3-1010 540 x 250 =35 mm K3-1011 540 x 250 =55 mm K3-1012 540 x 250 =75 mm K3-1013 540 x 250 =105 mm K3-1020 480
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationIndex 2. Safety information 2. Content 2. Technical 3. Specifications 3. Installation 4. Make sure all connectors are connected properly
RGB 700 ma Wall Ceiling 360º 30º 10 cm 100 cm 172 gr 50.000 25º 40º 60º 120º 3 x Luxeon IP40 7 Watt Excluded CLS LUXO 3 RGB Manual Version 2.1 April 2017 DEX Index 2 Safety information 2 Content 2 Tecnical
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationINDEX CLS LUXO 3 RGB SAFETY INFORMATION CONTENT. Manual V2.3 - August Index 2. Luxo 3 ceiling units 4. Safety information 2
DRIVER DRIVER EXCLUDED EXTERNAL Wall Ceiling 360º 30º 10 cm 100 cm 172 gr 50.000 40º 60º 120º 3 x Luxeon IP40 IP52 CLS LUXO 3 RGB Manual V2.3 - August 2018 DEX Index 2 Safety information 2 Content 2 Tecnical
More information10 Series Tube Fittings and Tubing
0 Series ube ittings and ubing 0,000 psi (690 bar) IOK roup IOK mbh (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, ermany el.: +49 69 900 449 ax: +49 69 900 4495 IOK, Inc. 343 North romenade
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
More information