LX SERIES Low-Pressure Gas Compressors
|
|
|
- Colleen Augusta Floyd
- 5 years ago
- Views:
Transcription
1 70 to 140 psi Inlet Pressure Pressure 1500 PSI C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX Page 1
2 140 to 300 psi Inlet Pressure Pressure 1500 PSI C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX Page 2
3 300 to 600 psi Inlet Pressure Pressure C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX Notes: Please consult with Hydro-Pac, Inc. for applications not covered by machines listed here. Charts showing detailed capacity information for other gases and in other units are available on request. This information is supplied for reference only and is subject to change. All capacities listed are based on gas at maximum inlet temperatures of 80F (27C). The capacity will be less if the inlet gas temperature is higher. All capacities are based on 60 hertz power. Depending on the model, the capacity may be less with 50 hertz power. Please consult with Hydro-Pac for capacity information for a specific model. 6. Capacity information in Nm 3 /hr is based on standard conditions of 1 atm and 0 C All pressures listed are gauge pressures. Capacity in KG/HR can be obtained by multiplying the scfm capacity by 0.14 Capacity in KG/Day can be obtained by multiplying the scfm capacity by 3.33 Page 3
4 Compressor Capacity in (scfm) - Single-Stage Units Pressure 1500 PSI C LX C LX C LX C LX C LX C LX C LX Note: The minimum inlet pressure for 1500 psi discharge is 200 psig. The compressors will operate at lower Pressure C LX C LX C LX C LX C LX C LX C LX Note: The minimum inlet pressure for 3000 psi discharge is 400 psig. The compressors will operate at lower Page 4
5 Compressor Capacity in (scfm) - Single-Stage Units Pressure C LX C LX C LX C LX C LX C LX C LX Note: The minimum inlet pressure for 6000 psi discharge is 800 psig. The compressors will operate at lower Pressure PSI C LX C LX C LX C LX C LX C LX C LX Note: The minimum inlet pressure for psi discharge is 1500 psig. The compressors will operate at lower inlet pressures. Do not exceed an 8 to 1 compression ratio. For example, the maximum discharge pressure with 500 psig inlet is 4000 psig. Page 5
LX-SERIES Low-Pressure Gas Compressors
70 to 140 psi Inlet Pressure Pressure 1500 PSI 70 80 90 100 110 120 130 140 C1.5-03-70/140LX 3 3.9 4.4 5.0 5.4 5.8 6.3 6.9 7.3 C1.5-05-70/140LX 5 6.4 7.2 8.1 8.7 9.4 10.3 11.3 11.9 C1.5-10-70/140LX 10
LX SERIES Low-Pressure Gas Compressors
70 to 140 psig Inlet Pressure Pressure 1500 PSI 70 80 90 100 110 120 130 140 C1.5-03-70/140LX 3 3.7 4.2 4.6 5.0 5.5 5.9 6.4 6.8 C1.5-05-70/140LX 5 6.1 6.8 7.6 8.3 9.0 9.7 10.4 11.1 C1.5-10-70/140LX 10
Check Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Check Valves Catalog 4135-CV Introduction Parker Series Check Valves are designed for uni-directional flow control of fluids
Series Low Pressure Steam Boiler Safety Valves
14-200 Series Low Pressure Steam Boiler Safety Valves ASME Section IV Set pressures from 5 to 15. Sizes 2", 2-1/2" and 3". Section IV Heating Boilers Applications: The 14 Series is an ASME Section IV high
Filters, regulators, and lubricators
Filters, regulators, and lubricators 28 filters 3/8", 1/2", and 3/4" Ports Technical data Polycarbonate bowl Polycarbonate bowl guard Metal bowl Metal bowl sight glass Filter body Manual drain Auto drain
Series Low Pressure Steam Heating Boiler Safety Valves
12-200 Series Low Pressure Steam Heating Boiler Safety Valves Section IV Heating Boilers Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle
Continuous Run Vent Unloaders
Continuous Run Vent Unloaders Mark 2 Load Genie The LGM 20 - Mark II is a self-contained unloading valve, which can be used wherever a continuous run compressor is required. The compressor may need to
Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
The PL Series Pressure Air Release Valves. Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger. Crispin.
The PL Series Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger Crispin Since 1905 PL SERIES Functio n Allows air and/or gas to be released from a pressurized liquid system
TYPE D50 PRESSURE REDUCING VALVE REDUCING VALVE D50 PRESSURE. PRESSURES to 300 PSIG at 420 F
D PRESSURE REDUCING VALVE TYPE D PRESSURES to 3 PSIG at 42 F Direct Acting Steam, Water or Gas Spherical Seating Surface on Floating Stainless Steel Disc for Tight Shutoff Four Spring Ranges Integral Stainless
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
SAFETY VALVES. Series 560 & Aquatrol Safety/Relief Valves SERIES. ASME Section I & VIII - NB Certified for Air, Gas and Steam
SAFETY VALVES ASME Section I & VIII - NB Certified for Air, Gas and Steam SIZES FROM 1/2 TO 2 1/2 NB RATED TO 250# TEMPERATURES TO 406 O Aquatrol s Series / valve line is a high capacity safety valve used
Advanced Air Driven Gas Boosters and Amplifiers. Sprague. Air Amplifiers. Gas Boosters
Advanced Air Driven Gas Boosters and Amplifiers Sprague Gas Boosters Air Amplifiers Gas Boosters and Systems Works off compressed air supplies Operates quietly Features mechanical separation between air
Air Driven Gas Boosters
Features & Benefits Sprague Products pneumatic boosters offer a cost effective way to compress shop air or bottled gas to meet various requirements for higher pressure, lower volume air or gas. Industrial
CAGI Data Sheets. Blower Performance Comparison. Stephen Horne, Blowers Product Manager Kaeser Compressors, Inc.
CAGI Data Sheets Blower Performance Comparison Stephen Horne, Blowers Product Manager Kaeser Compressors, Inc. Comparing blower performances across different manufacturers and technologies has long been
3000 Series filters 3/4" and 1" Ports
38 filters 3/4" and 1" Ports Technical data Metal bowl Metal bowl sight glass Filter body Manual drain Auto drain Standard filter Coalescing filter Seals Filter baffle Aluminum Nylon Aluminum Brass + nitrile
29 Series OEM Style Bronze Safety Valves for Steam, Air and Non-Hazardous Gas
Section I Power Boilers OEM Style for Steam, Air and Non-Hazardous Gas Section VIII Pressure Vessels Conbraco is ideally suited for OEM applications where compact size, dependable performance and maximum
Compressor Recording Data Book
Compressor Recording Data Book ARIEL RESPONSE CENTER SPARE PARTS ORDER ENTRY US/Canada...888.397.7766 International..+1 740.397.3602 @ Ariel Response Center...arc@arielcorp.com @ Spare Parts...spareparts@arielcorp.com
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (open yoke) and Model 5450 (closecoupled) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry.
MIS SERIES. Mist Eliminator. Installed differential pressure gauge and optional zero air-loss drain valve. Air or Water Cooled Aftercooler
MIS SERIES Mist Eliminator The ircel MIS Mist Eliminator (300-8000 scfm) provides a full line of mist eliminators to effectively remove oil, solids and water from your compressed air system. In addition,
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
Technical Information
IMPORTANT INFORMATION: Product must be installed and used in strict conformance with NFPA Pamphlet 58 and/or NFPA pamphlet 54 and all other codes, regulations and manufacturer recommendations. Failure
Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (Figure ) and Model 5450 (Figure 2) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry. These
CAGI Data Sheets. Blower Performance Comparison. Stephen Horne, Blowers Product Manager Kaeser Compressors, Inc.
CAGI Data Sheets Blower Performance Comparison Stephen Horne, Blowers Product Manager Kaeser Compressors, Inc. Comparing blower performances across different manufacturers and technologies has long been
Cash Valve B SERIES PRESSURE REGULATORS. ISSUED - JANUARY 1999 CAVMC-0509-US-0208 ISO 9001 Certified
Cash Valve B SERIES REGULATORS ISSUED - JANUARY 1999 CAVMC-09-US-0208 ISO 9001 Certified GENERAL INFORMATION / REGULATORS B SERIES VALVES DESCRIPTION The Cash Valve Series B pressure reducing and regulating
MERCER VALVE SERIES Flanged THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9100 SERIES Flanged THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in
Precision Air Drilling Services Equipment Information & Specifications
Equipment Information & Specifications Joy Super Booster Specifications Joy WB-12 5000 Specifications Page 2 of 10 Table of Contents Joy Super Booster Specifications... 2 Joy WB-12 5000 Specifications...
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
CASH VALVES TYPE G-4 PRESSURE REGULATORS
A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6 FEATURES Extremely compact design enables use of a smaller regulator.
See Note. 100% of rated load. Mechanical efficiency ISO3046/1 2,4,7 35.2% 34.8% 34.1% Electrical efficiency ISO3046/1 2,4,6,7 33.7% 33.4% 32.
Generator set data sheet 1000 kw (1250 kva) Standby Model: C1000 N6 Frequency: 60 Hz Fuel type: Natural gas MI 50 + Emissions NOx: 1.0 g/hp-hr LT water inlet temp: 50 C (122 F) HT water outlet temp: 90
See Note. 100% of rated load
Generator set data sheet 1250 kw (1563 kva) Standby Model: C1250 N6 Frequency: 60 Hz Fuel type: Natural gas MI 69 + Emissions NOx: 1.0 g/hp-hr LT water inlet temp: 50 C (122 F) HT water outlet temp: 90
Operators Manual ECO-AIR-IVS Internal Valve Actuation System
2534-A Shell Road Georgetown, TX 78628 www.parafour.com 512-626-4099 Operators Manual ECO-AIR-IVS Internal Valve Actuation System Ver 1.0 Warnings:!! This device is electrically operated and should only
The Pivotrol Pump Patented Selection and Sizing
How to Select and Size From the inlet pressure, back pressure and filling head conditions given below, select the pump size and check valve package which meets the capacity requirement of the application.
CASH VALVES TYPE G-60 HIGH CAPACITY PRESSURE REGULATOR
The Type G-60 is a high capacity all purpose regulator designed to operate within close operating limits. Application Type G-60 regulators are designed for use with steam, water, air, oil, gases, chemicals
ASME Section I and VIII - NB Certified for Air/Gas and Steam. Series 560. Series 570. Series Stainless steel whetted trimming.
SAFETY VALVES Safety Valves SIZES FROM 1/2 TO 2 1/2 RATED TO 300 PSI TEMPERATURES TO 450 F ASME Section I and VIII - NB Certified for Air/Gas and Steam Aquatrol s Series / valve line is a high capacity
CASH VALVES TYPE G-60 PRESSURE REGULATORS
A self-contained, self-actuated high capacity all purpose regulator designed to operate within close limits FEATURES GENERAL APPLICATION The G-60 is designed for use with steam, water, air, oil, gases,
AVL SERIES. Technical Specifications. Compressed Air Loaders. Features
Material Handling Process Cooling Temperature Control Size Reduction Compressed Air Loaders Technical Specifications Features (Shown with Optional Sight Glass) AVL loaders are designed to provide trouble-free
SV418 Series Bronze Safety Valves ASME Section VIII - NB Certified for Air, Gas, Steam, and Liquid
Safety SV418 Series Bronze Safety Description Spirax Sarco's SV418 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety
See Note. 100% of rated load
Generator set data sheet 1400 kw Continuous Model: C1400 N6C Frequency: 60 Hz Fuel type: Natural gas MI 75 + Emissions NOx: 1.0 g/hp-hr LT water inlet temp: 50 C (122 F) HT water outlet temp: 90 C (194
See Note. 100% of rated load
Generator set data sheet 1160 kw Continuous Model: Frequency: C1160 N5C 50 Hz Fuel type: Natural gas MI 78 + Emissions NOx: 500 mg/nm 3 LT water inlet temp: HT water outlet temp: 50 C (122 F) 95 C (203
See Note. 100% of rated load
Generator set data sheet 2000 kw Continuous Model: Frequency: Fuel type: Emissions NOx: LT water inlet temp: HT water outlet temp: C2000 N6C 60 Hz Low BTU 0.5 g/hp-h 50 C (122 F) 92 C (198 F) Measured
See Note. 100% of rated load
Generator set data sheet 2000 kw Continuous Model: C2000 N6C Frequency: 60 Hz Fuel type: Natural gas MI 76 + Emissions NOx: 0.5 g/hp-h LT water inlet temp: 50 C (122 F) HT water outlet temp: 92 C (198
Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and Differential Pressure Control 2 GE Oil
Kunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
CO 2 gas Revert Recovery
CO 2 gas Revert Recovery ASCO CO 2 Gas Revert Recovery Systems ASCO CO 2 Gas Revert Recovery Systems are engineered to efficiently recover the revert CO 2 gas from ASCO Dry Ice Pellet and Block Machines
SUITABLE FOR EXAMPLES OF USE APPROVALS. Type approval Deutsche Bahn. Requirements. AD 2000 Data sheet A2 DIN EN ISO PED 2014/68/EU
Type test approved atmospheric discharge safety valves for industrial applications Series 8 4.2 8 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases and
See Note. 100% of rated load 2,4,6, (17.73)
Generator set data sheet 2000 kw Continuous Model: Frequency: C2000 N5CB 50 Hz Fuel type: Natural gas MI 70 + Emissions NOx: 350 mg/nm 3 LT water inlet temp: HT water outlet temp: 40 C (104 F) 92 C (198
Check Valves (C Series) Catalog 4130-C Revised, July 2004
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker C Series Check Valves are designed for uni-directional flow control of fluids and gases in industries such as chemical processing,
2BE3 and P2620 Liquid Ring Vacuum Pumps and Compressors
2BE3 and P2620 Liquid Ring Vacuum Pumps and Compressors NASH 2BE3 and NASH P2620: A Wide Application Range NASH 2BE3 and NASH P2620: Reliable and Efficient The liquid ring vacuum pumps and compressors
Series 812. TÜV/CE atmospheric discharge safety valves for industrial applications. Air, gases and vapours
TÜV/CE atmospheric discharge safety valves for industrial applications Series 812 4.4 812 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases and vapours
CASH VALVE B SERIES PRESSURE REGULATORS
Single seated, spring loaded, direct acting diaphragm-type pressure reducing and regulating valves for a broad range of services FEATURES Reduce high inlet pressures to lower outlet pressures within close
L_Series. L_500 Liquid Ring Compressors
L_Series L_500 Liquid Ring Compressors L_500 Compression of process gases In 2002 The Nash Engineering Company in the USA and elmo vacuum technology GmbH, a Siemens subsidiary in Germany, united to form
Pumping Ratio 50:1. ( bar) Max. Output 7500 psi. Air Inlet. Material Outlet. Airmotor Bore Dia. 3 in. (76.2 mm) Stroke
3" and 4.25" Grease Pumps Specifications 5:1 3" Grease Pump Specifications / Performance Testing Pumping Ratio 5:1 Air Pressure 4-15 psi (2.7-1.3 bar) Max. Output 75 psi Pressure (517 bar) Air Inlet 3
Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications
Bulletin 71.1 D103087X012 Type HSR December 2017 Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications High Capacity Compact Design P1524_1 High Capacity Internal
HELIUM SERIES COMPRESSOR SYSTEMS
HELIUM SERIES COMPRESSOR SYSTEMS Features a 1-year System and Block Warranty Jordair QC Program System Features: Block Features: ISO 9001:2008 Cert. 97-544 Balanced Design Low Oil Consumption CSA Cert.
OPERATOR S MANUAL AND SALES AND ENGINEERING DATA
OPERATOR S MANUAL AND SALES AND ENGINEERING DATA INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, PARTS, TROUBLESHOOTING. INCLUDE MANUALS: AF044X-XX Air Motor (pn 97999-1466) & S-632 General
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
Cash Valve. Type G-60. High Capacity Pressure Regulator. Flow Control. Issued - February 2001 CAVMC-0511-US-0609 ISO 9001 Certified
Cash Valve Type G-60 High Capacity Pressure Regulator Issued - February 2001 CAVMC-0511-US-0609 ISO 9001 Certified Flow Control Type G-60 High Capacity Pressure Reducing And Regulating Valve Description
E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions
E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions Polypropylene SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST
9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in soft seat, high flow rate, pressure relieving
Eclipse Vortometric Burners Series HI
Version Burner Model Parameter 6V 8V V V V 6V 8V V V 8V 3V 36V Max. Input MM BTU/hr (MW) (.8).5 (3.) 7 (5.0) 3 (6.7) 3 (9.) () (6.) 78 (3) 90 (6) 5 (37) (7) (6) Min. Input MM BTU/hr (MW) (Natural Gas)
P600 Pressure Regulator
P600 Pressure Regulator The BelGAS P600 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with
Check Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Relief Valves Catalog 4135-CV Introduction Parker Relief Valves are designed such that when the upstream pressure exceeds the
Pressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
SECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
PRESSURE REGULATORS. GUIDE to REGULATORS and SERVO VALVES
Master Pneumatic regulators are made in a wide range of sizes to suit nearly all industrial requirements for pneumatic pressure regulation. Good pressure regulation is essential to the efficient use of
McGUIRE AIR COMPRESSORS HP RECIPROCATING AIR COMPRESSORS. Advantage. McGUIRE AIR COMPRESSORS
5 25 RECIPROCATING AIR COMPRESSORS Advantage CHAMPION ADVANTAGE PROGRAM * Downtime is NOT an option Champion has the solution 2 Fully-Equipped Packages Available Immediately A Winning Combination Champion
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high pressure systems. These regulators can be used with natural
KINGSTON. Model 710. Side Outlet Safety Relief Valve. Manufacturing reliable industrial valves for industry since 1908.
KEst.1908 KINGSTON Manufacturing reliable industrial valves for industry since 1908. Model 710 Side Outlet Safety Relief Valve Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050
Versa-Matic. Operating Manual. 3/8" Bolted Plastic Pumps. Polypropylene Kynar
Versa-Matic Operating Manual 3/8" Bolted Plastic Pumps Polypropylene Kynar E8 SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
MERCER VALVE GENERAL INFORMATION
THINK...MERCER FIRST MERCER VALVE GENERAL INFORMATION Mercer Valve Company 1980s Mercer valve was founded by Wesley Taylor with his Auto Seat Technology patent for pressure relief valves. Mercer s first
RCM - Direct Reading Flowmeters
Compact Design Easy to Install Horizontal or Vertical Installation Flow Rates up to 3000 GPM (Liquid) or 20000 SCFM (Gas) Low Pressure Drop Optional Alarms and Output Signals Accuracy: ± 3% of full scale
Product Information Filters for Process Gases
Fine Filtration Systems for Industry Product Information Filters for Process Gases Tel: +44(0)1622 718927 Email: info@headlinefilters.com Fax: +44(0)1622 882448 Website: www.headlinefilters.com Stainless
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
Capacity Charts. Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service
Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service About Reyco Valve Division The Reyco line of direct spring acting pressure relief valves utilizes sound engineering principles
CASH VALVE SERIES FR BACK PRESSURE VALVES
Diaphragm actuated valves designed for either continuous or intermittent operation which provide accurate, repetitive pressure control FEATURES GENERAL APPLICATION For use on practically all fluids and
HOW THE SPRAGUE PRODUCTS BOOSTERS WORK
SUPERCHARGE SHOP AIR OR BOTTLED GAS WITH SPRAGUE PRODUCTS GAS BOOSTER Sprague Products pneumatic boosters offer a cost effective way to compress shop air or bottled gas to meet various requirements for
Vacuum Accessories. Pneumatic. Section E. Pneumatic. Parker Hannifin Corporation Pneumatic Division Richland, Michigan
Vacuum Accessories Section E E 1 Notes 2 Index Contents Convum Filters... 4-5 Convum Silencers... 6 Silencer (Flow Thru)... 7 ASN Series Air Line Mufflers... 8 E 3 (Revised 10/13/04) Ordering Information
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated reducing regulators (Figure 1) are for low and high systems. These regulators can be used with natural gas, air, or a
STEAM TRAPS. Inverted Bucket Steam Traps (continued) Series B. Dimensions in. (mm)
X X X X X X X X X X X X X X TEMP. PRESS. PRESS OFF TEMP. PRESS. PRESS OFF DATE CODE Hoffman ITT DATE CODE Hoffman ITT STEAM TRAPS Inverted Bucket (continued) 3 Available in sizes 3 4" and 1" NPT and BSPT
A/C-HEATER SYSTEM - AUTOMATIC
A/C-HEATER SYSTEM - AUTOMATIC 1993 Toyota Celica 1993 Automatic A/C-Heater Systems Celica SPECIFICATIONS SPECIFICATIONS TABLE Application Specification Compressor Type 1.6L... Nippondenso 10PA15C 10-Cyl.
Weather-Proof Thermal Mass Flow Meter for Pipe - Duct
MF200A Series Weather-Proof Thermal Mass Flow Meter for Pipe - Duct Feature & Application n Accuracy ±1.0% reading n Watch-dog software n Wide turn-down ratio 300 : 1 n Repeatability ±0.15% FS n 16 x 2
Right Angle Nozzle Assembly
Swirl- Air atomizing nozzle Features: Large internal passages with no vanes or cores assure unrestricted flow... Little chance for clogging No external struts or supports to interfere with spray pattern
CASH VALVES TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES
Self-actuating pilot operated pressure reducing valve handling air, gas, and steam and accurate to within 1 /2% up to 3" and 1% for larger sizes. Description The G-4 regulator is a self-actuating pilot
CAGI Data Sheets. Blower Performance Comparison. Stephen Horne, Blowers Product Manager Kaeser Compressors, Inc.
CAGI Data Sheets Blower Performance Comparison Stephen Horne, Blowers Product Manager Kaeser Compressors, Inc. Comparing blower performances across different manufacturers and technologies has long been
2012 USA PRODUCT CATALOGUE
2012 USA PRODUCT CATALOGUE BRC FuelMaker via Industria 6, 12062 Cherasco (CN) - Italy Telephone: +39.0172.48681 Fax: +39.0172.488237 www.brcfuelmaker.it TABLE OF CONTENTS Page HOME REFUELLING APPLIANCES
PRESSURE RELIEF VALVES AND ACCESSORIES FOR A WIDE RANGE OF COMMERCIAL AND INDUSTRIAL APPLICATIONS. safety and relief valve catalog
PRESSURE RELIEF VALVES AND ACCESSORIES FOR A WIDE RANGE OF COMMERCIAL AND INDUSTRIAL APPLICATIONS safety and relief valve catalog Table of Contents PRODUCTS Valve Selection Guide.......................................................................
Mini 1. Compact High Flow 3-Way and 4-Way Pneumatic Directional Control Valves
Catalog LX-530 Mini 1 Compact High Flow and Pneumatic Directional Control Valves FEATURES: 3-port or 5-port bodies Manual, Air Pilot, Solenoid or Mechanical Operators Two-position, Single or Dual Actuation
What is CompleteCNG?
Product Overview What is CompleteCNG? What is CompleteCNG? CEC s CompleteCNG includes proven CleanCNG technology in a package that combines portability with configurable plug-and-play installation. The
ALUMINIUM COMPRESSED AIR FILTERS
4 F series LUMINIUM OMPRESSE IR FILTERS operating pressure volume flow rate connections operating temp. range standard colour 6 bar 5 to Nm /h /8 to /4,5 to 65 RL 50 PPLITIONS general industrial applications
Sprague. Advanced Air Driven Pump System
Sprague Advanced Air Driven Pump System ADVANCED AIR DRIVEN PUMP SYSTEM HIGH EFFICIENCY AIR VALVE Will not hang-up More liquid flow (less air consumption) INTERNAL MUFFLER Reduces noise Minimizes icing
60 SCFM Model # A B C D 3C-060-M04-P, Manual Drain C-060-M04-F, Float Drain C-060-M04-Fi, Float Drain w/indicator
Model # A B C D 3C-020-M02-P, Manual Drain 3.0 6.8 3.0 1.5 3C-020-M02-F, Float Drain 3.0 6.8 3.0 1.5 3C-020-M02-Fi, Float Drain w/indicator 3.0 7.5 3.0 1.5 3C-020-P02-P Poly Bowl, Manual Drain 3.0 6.8
Roots * Turbo Blower. Innovation that will blow you away
Roots * Turbo Blower Innovation that will blow you away New generation technology from a company with a proven history Innovative technology for air and gas handling solutions for industry. We have manufactured
300 Series INSTRUCTION MANUAL. Compressed Air Filters Models 302 (grade) through 317 (grade)
INSTRUCTION MANUAL 300 Series Compressed Air Filters Models 302 (grade) through 317 (grade) FORM NO.: 3259480 REVISION: 01/2014 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT.
Maximum Motor Power 0.25 hp 0.19 kw Torque Range ft. lbs Nm. Torque Range ft. lbs Nm Non-Reversible
21MF-900/910 Series 21MR-910 Series 0.3 hp 0.22 kw 0.25 hp 0.19 kw 0.24 11.3 ft. lbs. 0.3 15.3 Nm 1.2 10.0 ft. lbs. 1.6 13.6 Nm Threaded or Keyed Spindle 21MF-900 21MR-911 Code 0, 1, 2 & 3 5.69 Code 4
SRS Series. Smooth Return Gas Springs
Smooth Return Gas Springs SRS Series Built in return stroke speed dampening reduces pad bounce as much as 90%! Increases part transfer efficiency Stroke lengths from 125 mm to 300 mm Retrofits to existing
SPORT TM SERIES COMPRESSOR SYSTEMS
SPORT TM SERIES COMPRESSOR SYSTEMS Features a 2-year System and 10-year Block Warranty Jordair QC Program ISO 9001:2008 Cert. 97-544 CSA Cert. No. LR77799 CRN Pressure Components B&PV Licence MA-2007 System
TECHNICAL BULLETIN SELECTING THE RIGHT COMPRESSOR, STORAGE SYSTEM AND COMPONENTS FOR YOUR CNG REFUELING STATION
TECHNICAL BULLETIN SELECTING THE RIGHT COMPRESSOR, STORAGE SYSTEM AND COMPONENTS FOR YOUR CNG REFUELING STATION COMPONENTS One of the more difficult aspects of purchasing a CNG refueling system is determining
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy