Terminals, Kits and Tools

Transcription

1 Terminals, Kits and Tools Glossary of Terminals and Tools Terms 48 Ring Tongues 53 Multi- Ring Tongues 78 Standard Forks 79 Block Forks 85 Flanged Block Forks 93 ocking Forks 98 Butt onnectors 107 Female Disconnects 113 Male Disconnects 121 Flags 125 Multi-Stack Disconnects 125 Adapters 126 High Temperature 128 losed nd onnectors 131 Parallel onnectors 133 Pin Terminals 134 3M Highland Bagged Terminals 135 Kits 142 Tools 143 Terminal hart 146 American ire Gauge 146 TRMINAS, KITS AND TOOS of Scotchlok terminals, disconnects, connectors and tools for high performance use in the assembly and maintenance know our products for: Design features assuring easy installation of 3M of strand hang-ups and wire twisting, and easy insulation entry. These are a few of the characteristics that make the installer s job easier. Variety of types, sizes and materials meeting a broad application range, including the demands of temperature and weather. FAX

2 FRQUNTY ASKD QUSTIONS hat does the insulation grip do? hich 3M tools can I use with 3M terminals? hat s the difference between insulated and fully insulated disconnects? hat temperatures do 3M terminals withstand? The insulation grip provides a second crimp on the wire insulation providing additional wire strain relief. It s excellent for high vibration applications. The handy reference guide on pages gives you a variety of choices of tools to use with 3M terminals. Insulated disconnects have barrel insulation only and fully insulated disconnects are insulated from the barrel to the receptacle/tab. Non-insulated 3M terminals withstand temperatures up to 347 F (175 ). Insulated 3M terminals withstand temperatures up to 221 F (105 ). Glossary of Terminals and Tools Terms ADAPTRS To interconnect two connectors already attached to wires. BOK FORK Same strength as the fork, but designed to use in terminal block because sides lie flat against barrier portion of terminal block. BUT STY Similar advantages as disconnects. Gives reliable in-line connection because parts are made to have holding friction when joined. Usually for automotive use. BUTT Uses chamfered barrel ends to provide fast, easy wire insertion from both ends and a built-in wire stop for correct positioning. Must be crimped at both ends. OSD-ND Used in situations requiring pigtail of two or more wires. FANGD FORK Gives the benefit of both the block and locking forks. Stays secure should screw loosen. FORK Allows rapid connection of wire. Usually used on free-standing studs, because of wider tongues. OKING FORK The spring-like tongue locks in place around the stud even when mount screw is not tightened. xtra force is required to remove from stud. PARA Similar to butt with overlapped wires and single crimp in center of connector. Used where space is limited. PINS For installation in compression blocks. Used in urope for terminating stranded wire. QUIK ONNT (DISONNT) Attached to mating part by tongue of female part slipping over male tab. Use of dents and rolled edges on female part provides excellent holding force while allowing easy and quick disconnect. RING The standard style of tongue. The safest and most reliable. It cannot be removed unless mounting screw is removed. TAB Uses mounting hole for rivet or screw. TAP No wire stripping is necessary, just lay wire in connector and crimp. onnection is made. 48 PHON

3 Standard Terminal onstruction Vinyl Insulated Nylon Insulated with Grip 3M Terminals provide a variety of design features assuring consistently effective, reliable performance and easy installation. Please refer to the illustrations at the numbered locations for the attributes described below. 1. One-piece, burr-free construction provides maximum electrical conductivity. lectrical bright-tin plating gives points and assures maximum installed strength. 3. Open-end design permits visual inspection of wire location before and after crimping. 5. Injection molded insulations on terminals are the highest quality in the industry. sleeve. Sleeve provides optimum grip on insulation, strain 9. Non-slip ridge so tool slides to correct position for a proper crimp and better workmanship. Styles Non-Insulated Butted Seam performance or installation characteristics are not needed. Non-Insulated Brazed Seam anywhere on barrel surface. Silver brazed seam will not open under crimping pressure or operating stresses. Unlike butted seam parts, stranded wire cannot escape barrel Vinyl Insulated Brazed and Butted Seams TRMINAS, KITS AND TOOS Molding ensures consistent wall thickness for maximum reliability after crimping Molding allows funnel barrel construction for easier installation Molding offers the crimp ridge and non-slip ridge terminal barrel, resulting in few miscrimps. 7. Funnel barrel construction provides: Positive, easy wire insertion No hang-ups of wire strands ire twisting not necessary Used where insulated barrel is necessary and desirable. molded polyvinyl chloride sleeve securely attached and funneled for easy wire entry. ire insulation positions itself against funnel portion of vinyl sleeve thus eliminating sleeve provide excellent electrical contact plus mechanical stress relief at junction of insulation and barrel. has a non-slip ridge for ease of positioning crimping tool. FAX

4 Industry standard color coding indicates wire range. Insulators are rated at a continuous operating temperature orrect crimping is important to assure a strong connection. Nylon Insulated Butted Seam with Grip lectrical rimp Used where insulated barrel and positive insulation grip are necessary or desirable. Terminal consists of butted seam insulation positions itself against funnel portion of brass excellent electrical contact plus mechanical stress relief at junction of insulation and barrel. Positioning crimp tool is Industry standard color coding indicates wire range. Insulators are rated at a continuous operating temperature Installation Procedure mechanical connection. Funnel design guides wire into position. Mechanical rimp Insulated Terminals and onnectors: orrect Incorrect Non-Insulated Terminals and onnectors: Indent should be opposite the barrel seam. Heat Shrink Terminals, onnectors and Disconnects 3M disconnects protect against the most challenging of environments, making the best moisture protection available. They offer several advantages over conventional unsealed products. orrosion Resistance The adhesive-lined heat shrink material, when properly crimped and shrunk, provides a seal resistant to water, salt, steam and other related contaminants. No wire strand hang-up as the wire is inserted, giving a fast, positive installation. ire is in place, ready for crimping. Improved Mechanical Performance The adhesive-lined heat shrink tubing adheres, when shrunk, to both the connector and the wire insulation providing improved pullout strength and strain relief. Durable Heat Shrink Tubing Tough heat shrink tubing effectively resists abrasion, scoring, cut-through, and the effects of long-term aging. For maximum crimping performance, barrel of connector must be properly indexed in the crimp tool station. Versatile and asy to Use 3M heat shrink terminals, splices and disconnects are easily with a recommended tool and heat source. The and the transparent tubing allows for visual inspection. 50 PHON

5 Application Procedure for Heat Shrink Products: 1. Strip wires to appropriate length as indicated on package label. of a recommended tool. High Temperature Terminals and onnectors 3M high temperature terminals and connectors are constructed of steel with a nickel plating. Their temperature applications where other connectors would corrode or melt. temperature steel parts. Standard rimp Terminal and onnector Specifications Materials rimp terminals and connectors are to be burr-free, grip sleeves are to be tin-plated brass and attached securely to the barrel. Terminal insulators are to be molded extruded polyvinyl chloride or nylon with a temperature TRMINAS, KITS AND TOOS onstruction to prevent strand hang-up and a crimp ridge for proper tool location. Nylon insulated terminals and connectors are to have butted seam barrels with insulation grip sleeves. maximum conductor retention. idth learance ength ength Note: All dimensions are measured in inches. FAX

6 3M Terminal Numbering System 3M Identity ode/ Style ire ode (AG), Tab, or Bullet Tongue ode Product Availability** M No ode = Bare Brazed A = No (adapter) I = Double all w/interlock N = Nylon Brazed NG = Nylon w/ Grip NHU = Nylon/Butted w/ Heat Shrink Over Top NU = Nylon/Butted U = Bare/Butted V = Vinyl/Brazed VA = Vinyl Adapter VU = Vinyl/Butted 24 = (yellow) 20 = (yellow) 18 = (red) 14 = (blue) 10 = (yellow) 8 = 8 (red) 6 = 6 (blue) 4 = 4 (yellow) (STUD) 0 = 0 2 = 2 4 = 4 6 = 6 8 = 8 10 = = 1/2" 14 = 1/4" 38 = 3/8" 516 = 5/16" 610 = 6, 8 10 (TAB) 110 = 0.110" x 0.020" 110/32 = 0.110" x 0.032" 187 = 0.187" x 0.020" 250 = 0.250" x 0.032" 375 = 0.375" x 0.050" (BUT) 156 = 0.156" Dia. 180 = 0.180" Dia. 47 = 0.47 pin length 55 = 0.55 pin length F = Fork FB = Fork, Block FBHT = Fork, Block, High Temp. FFB = Fork, Flanged, Block FHT = Fork, High Temp. F = Fork, ocking R = Ring RHD = Ring, Heavy Duty RHT = Ring, High Temp. /S = Short or Small / = arge or ong R/Flag = Ring, Flag B = Butt onnector = losed nd onnector P = Pin onnector P = Parallel onnector BM = Butt onnector Moisture Res. /ST = losed nd onnector, Steel Insert Disconnect DF = Female DFHT = Female, High Temp. DFI = Female, Fully Insulated DM = Male DMF = Male, Female DMHT = Male, High Temp. DMI = Male, Fully Insulated DF/Flag = Female Flag Adapter D = Disconnects F = Female FFI = Double Female, Fully Insulated M = Male MMI = Double Male, Fully Insulated MMF = Double Male, Female MFM = Male, Female, Male, Stacking RR = Ring Rectangular Tongue Fuse = Fuse Adapter lip All box (X) package terminals in this catalog are available (in the packaging quantity indicated) from local distributor stocks. All bulk (K) packaged terminals are available in full cartons only, and may require a three to five week order lead time from the factory. * A dash ( ) separates the wire size code from the stud, tab or bullet size code. ** Denotes product packaging. Packaging of 3M Scotchlok terminals should be specified by using the appropriate terminal part number. Suffix letters are indicated within each product number. (See Product Number heading in ordering information charts.) Note: ontact your local distributor or 3M sales office for price and delivery information. Map of Numbering System xample: M NG 18 (-) 4 FB/S K 3M Identity Style Nylon w/ Grip ire (red) /Bullet or Tab 4 Tongue ode Black Fork Short Packaging ode Bulk Insulator olor oding Yellow (26-24 AG) Red (22-18 AG) Blue (16-14 AG) Yellow (12-10 AG) Red (8 AG) Blue (6 AG) Yellow (4 AG) 52 PHON

7 Ring Tongues 3M Ring Tongues Non-Insulated Brazed Seam AG UP ire (AG) Thickness ength arton ase M18-4R/SX M18-4R/SK M18-6R/SX M18-6R/SK M18-8R/X M18-8R/K M18-10R/X M18-10R/K M18-14R/SX / M18-38RX / TRMINAS, KITS AND TOOS M18-4R/S M18-6R/S M18-8R/ M18-10R/ M18-14R/S M18-38R /4 3/8 ire FAX

8 3M Ring Tongues Non-Insulated Brazed Seam AG UP ire (AG) Thickness ength arton ase M14-2R/SK M14-4R/SX M14-6R/SX M14-6R/SK M14-6R/K M14-8R/X M14-8R/K M14-10RK M14-10R/X M14-10R/K M14-14R/SX / M14-14R/SK / M14-516R/SK / M14-38RX / M14-2R/S M14-4R/S M14-6R/S M14-6R/ M14-8R/ ire M14-10R M14-10R/ M14-14R/S M14-516R/S M14-38R /4 5/16 3/8 ire PHON

9 3M Ring Tongues Non-Insulated Brazed Seam AG UP ire (AG) Thickness ength arton ase M10-4R/SK M10-6RX M10-6RK M10-8RX M10-8RK M10-10RX M10-10RK M10-14R/SX / M10-14R/SK / M10-516R/SX / M10-38R/SX / M10-38R/SK / M10-12RK / TRMINAS, KITS AND TOOS M10-4R/S M10-6R M10-8R M10-10R ire M10-14R/S M10-516R/S M10-38R/S M10-12R 1/4 5/16 3/8 1/2 ire FAX

10 3M Ring Tongues Non-Insulated Brazed Seam 8 AG UP ire (AG) Thickness ength arton ase M8-10R/SX M8-10R/SK M8-14R/SX / M8-516RX / M8-516RK / M8-38RX / M8-38RK / M8-12R/SK / M8-10R/S M8-14R/S M8-516R M8-38R M8-12R/S 10 1/4 5/16 3/8 1/2 ire PHON

11 3M Ring Tongues Non-Insulated Brazed Seam 6 AG UP ire (AG) Thickness ength arton ase M6-10R/SX M6-10R/SK M6-14R/SX / M6-14R/SK / M6-516RX / M6-516RK / M6-38RX / M6-38RK / M6-12R/SK / TRMINAS, KITS AND TOOS M6-10R/S M6-14R/S M6-516R M6-38R M6-12R/S 10 1/4 5/16 3/8 1/2 ire FAX

12 3M Ring Tongues Non-Insulated Brazed Seam 4 AG UP ire (AG) Thickness ength arton ase M4-10RX M4-10RK M4-14RX / M4-14RK / M4-516RX / M4-516RK / M4-38RX / M4-38RK / M4-12R/SK / M4-10R M4-14R M4-516R M4-38R M4-12R/S 10 1/4 5/16 3/8 1/2 ire PHON

13 3M arge Gauge Ring Tongues Non-Insulated opper Seamless 2 AG Product Number UP olor ode ire (AG) Thickness M2-14RX Brown 2 AG 1/4" 0.65" 0.41" 1.69" 0.10" 0.34" 10/box 100 (6 mm 2 ) (16,5 mm) (10,4 mm) (42,9 mm) (2,5 mm) (8,6 mm) M2-516RX Brown 2 AG 5/16" 0.65" 0.41" 1.69" 0.10" 0.34" 10/box 100 (8 mm 2 ) (16,5 mm) (10,4 mm) (42,9 mm) (2,5 mm) (8,6 mm) M2-38RX Brown 2 AG 3/8" 0.65" 0.41" 1.69" 0.10" 0.34" 10/box 100 (10 mm 2 ) (16,5 mm) (10,4 mm) (42,9 mm) (2,5 mm) (8,6 mm) Inner Unit Pack ase Qty. TRMINAS, KITS AND TOOS M2-14RX M2-516RX M2-38RX 1/4 5/16 3/8 ire FAX

14 3M arge Gauge Ring Tongues Non-Insulated opper Seamless 1 AG Product Number UP olor ode ire (AG) Thickness M1-14RX Green 1 AG 1/4" 0.65" 0.43" 1.71" 0.10" 0.36" 10/box 100 (6 mm 2 ) (16,5 mm) (10,9 mm) (43,4 mm) (2,5 mm) (9,1 mm) M1-516RX Green 1 AG 5/16" 0.65" 0.43" 1.71" 0.10" 0.36" 10/box 100 (8 mm 2 ) (16,5 mm) (10,9 mm) (43,4 mm) (2,5 mm) (9,1 mm) M1-38RX Green 1 AG 3/8" 0.68" 0.43" 1.71" 0.10" 0.36" 10/box 100 (10 mm 2 ) (17,3 mm) (10,9 mm) (43,4 mm) (2,5 mm) (9,1 mm) Inner Unit Pack ase Qty. M1-14RX M1-516RX M1-38RX 1/4 5/16 3/8 ire PHON

15 3M arge Gauge Ring Tongues Non-Insulated opper Seamless 1/0 AG Product Number UP olor ode ire (AG) Thickness M1/0-14RX Pink 1/0 AG 1/4" 0.75" 0.38" 1.84" 0.10" 0.41" 10/box 100 (6 mm 2 ) (19,0 mm) (9,7 mm) (46,7 mm) (2,5 mm) (10,4 mm) M1/0-38RX Pink 1/0 AG 3/8" 0.75" 0.42" 1.84" 0.10" 0.41" 10/box 100 (8 mm 2 ) (19,0 mm) (10,7 mm) (46,7 mm) (2,5 mm) (10,4 mm) M1/0-12RX Pink 1/0 AG 1/2" 0.75" 0.42" 1.84" 0.10" 0.41" 10/box 100 (12 mm 2 ) (19,0 mm) (10,7 mm) (46,7 mm) (2,5 mm) (10,4 mm) Inner Unit Pack ase Qty. TRMINAS, KITS AND TOOS M1/0-14RX M1/0-38RX M1/0-12RX 1/4 3/8 1/2 ire 1/0 1/0 1/0 FAX

16 3M arge Gauge Ring Tongues Non-Insulated opper Seamless 2/0 AG Product Number UP olor ode ire (AG) Thickness M2/0-38RX Black 2/0 AG 3/8" 0.83" 0.48" 2.05" 0.10" 0.46" 10/box 100 (10 mm 2 ) (21,1 mm) (12,2 mm) (52,1 mm) (2,5 mm) (11,7 mm) M2/0-12RX Black 2/0 AG 1/2" 0.83" 0.48" 2.05" 0.10" 0.46" 10/box 100 (12 mm 2 ) (21,1 mm) (12,2 mm) (52,1 mm) (2,5 mm) (11,7 mm) Inner Unit Pack ase Qty. M2/0-38RX M2/0-12RX 3/8 1/2 ire 2/0 2/0 3M arge Gauge Ring Tongues Non-Insulated opper Seamless 3/0 AG Product Number UP olor ode ire (AG) Thickness M3/0-38RX Orange 3/0 AG 3/8" 0.91" 0.50" 2.24" 0.12" 0.51" 6/box 60 (10 mm 2 ) (23,1 mm) (12,7 mm) (56,9 mm) (3,1 mm) (13,0 mm) M3/0-12RX Orange 3/0 AG 1/2" 0.91" 0.50" 2.24" 0.12" 0.51" 6/box 60 (12 mm 2 ) (23,1 mm) (12,7 mm) (56,9 mm) (3,1 mm) (13,0 mm) Inner Unit Pack ase Qty. M3/0-38RX M3/0-12RX 3/8 1/2 ire 3/0 3/0 62 PHON

17 3M arge Gauge Ring Tongues Non-Insulated opper Seamless 4/0 AG-250 kcmil Product Number UP olor ode ire (AG) Thickness M4/0-38RX Purple 4/0 AG 3/8" 1.00" 0.52" 2.29" 0.125" 0.56" 6/box 60 (10 mm 2 ) (25,4 mm) (13,2 mm) (58,2 mm) (3,2 mm) (14,2 mm) M4/0-12RX Purple 4/0 AG 1/2" 1.00" 0.52" 2.29" 0.125" 0.56" 6/box 60 (12 mm 2 ) (25,4 mm) (13,2 mm) (58,2 mm) (3,2 mm) (14,2 mm) M250-38RX Yellow 250 kcmil 3/8" 1.13" 0.60" 2.43" 0.14" 0.63" 6/box 60 (10 mm 2 ) (28,7 mm) (15,2 mm) (61,7 mm) (3,6 mm) (16,0 mm) M250-12RX Yellow 250 kcmil 1/2" 1.13" 0.60" 2.43" 0.14" 0.63" 6/box 60 (12 mm 2 ) (28,7 mm) (15,2 mm) (61,7 mm) (3,6 mm) (16,0 mm) Inner Unit Pack ase Qty. TRMINAS, KITS AND TOOS M4/0-38RX M4/0-12RX M250-38RX M250-12RX 3/8 1/2 3/8 1/2 ire 4/0 4/0 250 (kcmil) 250 (kcmil) 3M Ring Tongues Non-Insulated Butted Seam AG Product Number UP ire (AG) Thickness ength Terminals per ase MU24-2RK MU24-4RK MU24-8RK MU24-2R MU24-4R MU24-8R ire FAX

18 3M Ring Tongues Non-Insulated Butted Seam AG Product Number UP ire (AG) Thickness ength Terminals per ase MU18-4R/SK MU18-6R/SK MU18-8R/K MU18-10R/K MU18-14R/SK / MU18-38RK / MU18-4R/S MU18-6R/S MU18-8R/ MU18-10R/ MU18-14R/S MU18-38R /4 3/8 ire M Ring Tongues Non-Insulated Butted Seam AG Product Number UP ire (AG) Thickness ength Terminals per ase MU14-4R/SK MU14-6R/SK MU14-8R/K MU14-10RK MU14-10R/K MU14-14R/SK / MU14-4R/S MU14-6R/S MU14-8R/ MU14-10R MU14-10R/ MU14-14R/S /4 ire PHON

19 3M Ring Tongues Non-Insulated Butted Seam AG Product Number UP ire (AG) Thickness ength MU10-4R/SK MU10-6RK MU10-8RK MU10-10RK MU10-4R/S MU10-6R MU10-8R MU10-10R MU10-14R/S MU10-516R/S /4 5/16 ire Terminals per ase MU10-14R/SK / TRMINAS, KITS AND TOOS 3M Ring Tongues Vinyl Insulated Brazed Seam AG UP ire (AG) Thickness ength arton ase MV18-4R/SX MV18-4R/SK MV18-6R/SX MV18-6R/SK MV18-8R/X MV18-8R/K MV18-10R/X MV18-10R/K MV18-14R/SX / MV18-14R/SK / MV18-516R/SX / MV18-38RX / MV18-38RK / MV18-4R/S MV18-6R/S MV18-8R/ MV18-10R/ MV18-14R/S MV18-38R /4 3/8 ire FAX

20 3M Ring Tongues Vinyl Insulated Brazed Seam AG UP ire (AG) Thickness ength arton ase MV14-4R/SX MV14-4R/SK MV14-6R/SX MV14-6R/SK MV14-8R/SK MV14-8R/X MV14-8R/K MV14-10RK MV14-10R/X MV14-10R/K MV14-14R/SX / MV14-14R/SK / MV14-516R/SX / MV14-516R/SK / MV14-38RX / MV14-38RK / MV14-4R/S MV14-6R/S MV14-8R/S MV14-8R/ ire MV14-10R MV14-10R/ MV14-14R/S MV14-516R/S MV14-38R /4 5/16 3/8 ire PHON

21 3M Ring Tongues Vinyl Insulated Brazed Seam AG UP ire (AG) Thickness ength arton ase MV10-4R/SK MV10-6RX MV10-6RK MV10-8RX MV10-8RK MV10-10RX MV10-10RK MV10-14R/SX / MV10-14R/SK / MV10-516R/SX / MV10-516R/SK / MV10-38R/SX / MV10-38R/SK / MV10-12RX / MV10-12RK / TRMINAS, KITS AND TOOS MV10-4R/S MV10-6R MV10-8R MV10-10R ire MV10-14R/S MV10-516R/S MV10-38R/S MV10-12R 1/4 5/16 3/8 1/2 ire FAX

22 3M Ring Tongues Vinyl Insulated Butted Seam AG UP ire (AG) Thickness ength Terminals per ase MVU18-4R/SK MVU18-6R/SK MVU18-8R/K MVU18-10R/K MVU18-14R/SK / MVU18-516R/SK / MVU18-38RK / MVU18-4R/S MVU18-6R/S MVU18-8R/ ire MVU18-10R/ MVU18-14R/S MVU18-516R/S MVU18-38R 10 1/4 5/16 3/8 ire PHON

23 3M Ring Tongues Vinyl Insulated Butted Seam AG UP ire (AG) Thickness ength MVU14-4R/SK MVU14-6R/SK MVU14-8R/SK MVU14-8RK MVU14-8R/K MVU14-10RK MVU14-10R/K MVU14-14R/SK / MVU14-516R/SK / MVU14-38RK / Terminals per ase TRMINAS, KITS AND TOOS MVU14-4R/S MVU14-6R/S MVU14-8R/S MVU14-8R MVU14-8R/ ire MVU14-10R MVU14-10R/ MVU14-14R/S MVU14-516R/S MVU14-38R /4 5/16 3/8 ire FAX

24 3M Ring Tongues Vinyl Insulated Butted Seam AG UP ire (AG) Thickness ength MVU10-4R/SK MVU10-6RK MVU10-8RK MVU10-10RK MVU10-14R/SK / MVU10-516R/SK / MVU10-38R/SK / Terminals per ase MVU10-4R/S MVU10-6R MVU10-8R MVU10-10R ire MVU10-14R/S MVU10-516R/S MVU10-38R/S 1/4 5/16 3/8 ire PHON

25 3M Ring Tongues Nylon Insulated Brazed Seam 8 AG UP ire (AG) Thickness ength arton ase MN8-10R/SK MN8-14R/SX / MN8-14R/SK / MN8-516RK / MN8-38RK / MN8-12R/SK / MN8-10R/S MN8-14R/S MN8-516R MN8-38R MN8-12R/S 10 1/4 5/16 3/8 1/2 ire TRMINAS, KITS AND TOOS 3M Ring Tongues Nylon Insulated Brazed Seam 6 AG UP ire (AG) Thickness ength arton ase MN6-10R/SK MN6-14R/SX / MN6-14R/SK / MN6-516RK / MN6-38RK / MN6-12R/SK / MN6-10R/S MN6-14R/S MN6-516R MN6-38R MN6-12R/S 10 1/4 5/16 3/8 1/2 ire FAX

26 3M Ring Tongues Nylon Insulated Brazed Seam 4 AG UP ire (AG) Thickness ength arton ase MN4-10RK MN4-14RK / MN4-516RK / MN4-38RK / MN4-12R/SK / MN4-10R MN4-14R MN4-516R MN4-38R MN4-12R/S 10 1/4 5/16 3/8 1/2 ire M Ring Tongues Nylon Insulated AG UP ire (AG) Thickness ength arton ase MN24-2RK MN24-4RX MN24-4RK MN24-6RX MN24-6RK MN24-8RX MN24-8RK MN24-10RX MN24-10RK MN24-2R MN24-4R MN24-6R MN24-8R MN24-10R ire PHON

27 3M Ring Tongues Nylon Insulated with Grip AG UP ire (AG) Thickness ength arton ase MNG18-4R/SX MNG18-4R/SK MNG18-6R/SX MNG18-6R/SK MNG18-8R/X MNG18-8R/K MNG18-10R/X MNG18-10R/K MNG18-14R/SX / MNG18-14R/SK / MNG18-516R/SX / MNG18-516R/SK / MNG18-38RX / MNG18-38RK / TRMINAS, KITS AND TOOS MNG18-4R/S MNG18-6R/S MNG18-8R/ MNG18-10R/ MNG18-14R/S MNG18-516R/S MNG18-38R /4 5/16 3/8 ire FAX

28 3M Ring Tongues Nylon Insulated with Grip AG UP ire (AG) Thickness ength arton ase MNG14-4R/SX MNG14-4R/SK MNG14-6R/SX MNG14-6R/SK MNG14-8R/SX MNG14-8R/SK MNG14-8RX MNG14-8RK MNG14-8R/X MNG14-8R/K MNG14-10RX MNG14-10RK MNG14-10R/X MNG14-10R/K MNG14-14R/SX / MNG14-14R/SK / MNG14-516R/SX / MNG14-516R/SK / MNG14-38RX / MNG14-38RK / MNG14-4R/S MNG14-6R/S MNG14-8R/S MNG14-8R MNG14-8R/ ire MNG14-10R MNG14-10R/ MNG14-14R/S MNG14-516R/S MNG14-38R /4 5/16 3/8 ire PHON

29 3M Ring Tongues Nylon Insulated with Grip AG UP ire (AG) Thickness ength arton ase MNG10-4R/SK MNG10-6RX MNG10-6RK MNG10-8RX MNG10-8RK MNG10-10RX MNG10-10RK MNG10-14R/SX / MNG10-14R/SK / MNG10-516R/SX / MNG10-516R/SK / MNG10-38R/SX / MNG10-38R/SK / TRMINAS, KITS AND TOOS MNG10-4R/S MNG10-6R MNG10-8R MNG10-10R ire MNG10-14R/S MNG10-516R/S MNG10-38R/S 1/4 5/16 3/8 ire FAX

30 3M Ring Tongues Heat Shrink Brazed Seam AG UP ire (AG) Thickness ength arton ase MH18-6R/X MH18-6R/K MH18-8R/X MH18-8R/K MH18-10R/X MH18-10R/K MH18-6R/ MH18-8R/ MH18-10R/ ire M Ring Tongues Heat Shrink Brazed Seam AG UP ire (AG) Thickness ength arton ase MH14-6R/X MH14-6R/K MH14-8R/X MH14-8R/K MH14-10R/X MH14-10R/K MH14-14R/SX / MH14-14R/SK / MH14-516R/SX / MH14-38RX / MH14-38RK / MH14-6R/ MH14-8R/ MH14-10R/ MH14-14R/S MH14-516R/S MH14-38R /4 5/16 3/8 ire PHON

31 3M Ring Tongues Heat Shrink Brazed Seam UP ire (AG) Thickness ength arton ase MH10-8RX MH10-10RX MH10-10RK MH10-14RX / MH10-14RK / MH10-38RX / MH10-38RK / TRMINAS, KITS AND TOOS MH10-8R MH10-10R MH10-14R MH10-38R /4 3/8 ire FAX

32 Multi- Ring Tongues 3M Multi- Ring Tongues Vinyl Insulated Brazed Seam UP ire (AG) Thickness ength arton ase MV18-610RX /8/ MV18-610RK /8/ MV14-610RX /8/ MV14-610RK /8/ MV10-610RX /8/ MV10-610RK /8/ MV18-610R MV14-610R MV10-610R 6/8/10 6/8/10 6/8/10 ire M Multi- Ring Tongues Nylon Insulated with Grip UP ire (AG) Thickness ength arton ase MNG18-610RX /8/ MNG18-610RK /8/ MNG14-610RX /8/ MNG14-610RK /8/ MNG10-610RX /8/ MNG10-610RK /8/ MNG18-610R MNG14-610R MNG10-610R 6/8/10 6/8/10 6/8/10 ire PHON

33 Standard Forks 3M Standard Forks Non-Insulated Brazed Seam UP ire (AG) Thickness ength arton ase M18-6FX M18-6FK M18-8FX M18-8FK M18-10FX M18-10FK M14-6FX M14-6FK M14-8FK M14-10FX M14-10FK M10-6FK M10-8FX M10-8FK M10-10FX M10-10FK TRMINAS, KITS AND TOOS M18-6F M18-8F M18-10F M14-6F M14-8F M14-10F ire M10-6F M10-8F M10-10F ire FAX

34 3M Standard Forks Non-Insulated Butted Seam UP ire (AG) Thickness ength MU18-6FK MU18-8FK MU14-8FK MU14-10FK MU10-8FK MU10-10FK Terminals per ase MU18-6F MU18-8F MU14-8F MU14-10F ire MU10-8F MU10-10F 8 10 ire PHON

35 3M Standard Forks Vinyl Insulated Brazed Seam UP ire (AG) Thickness ength arton ase MV18-6FX MV18-6FK MV18-8FX MV18-8FK MV18-10FX MV18-10FK MV14-6FX MV14-6FK MV14-8FX MV14-8FK MV14-10FX MV14-10FK MV10-6FX MV10-6FK MV10-8FX MV10-8FK MV10-10FX MV10-10FK TRMINAS, KITS AND TOOS MV18-6F MV18-8F MV18-10F MV14-6F MV14-8F MV14-10F ire MV10-6F MV10-8F MV10-10F ire FAX

36 3M Standard Forks Vinyl Insulated Butted Seam UP ire (AG) Thickness ength MVU18-6FK MVU18-8FK MVU18-10FK MVU14-6FK MVU14-8FK MVU14-10FK MVU10-6FK MVU10-8FK MVU10-10FK arton ase MVU18-6F MVU18-8F MVU18-10F MVU14-6F MVU14-8F MVU14-10F ire MVU10-6F MVU10-8F MVU10-10F ire PHON

37 3M Standard Forks Nylon Insulated with Grip UP ire (AG) Thickness ength arton ase MNG18-6FX MNG18-6FK MNG18-8FX MNG18-8FK MNG18-10FK MNG14-6FX MNG14-6FK MNG14-8FX MNG14-8FK MNG14-10FX MNG14-10FK MNG10-6FK MNG10-8FX MNG10-8FK MNG10-10FX MNG10-10FK TRMINAS, KITS AND TOOS MNG18-6F MNG18-8F MNG18-10F ire MNG14-6F MNG14-8F MNG14-10F MNG10-6F MNG10-8F MNG10-10F ire FAX

38 3M Standard Forks Nylon Insulated UP ire (AG) Thickness ength arton ase MN24-4FX* MN24-4FK* MN24-6FX* MN24-6FK* * Not U isted or SA ertified MN24-4F MN24-6F 4 6 ire PHON

39 Block Forks 3M Block Forks Non-Insulated Brazed Seam AG UP ire (AG) Thickness ength arton ase M18-4FB/SK M18-6FB/SX M18-6FB/SK M18-6FBX M18-6FBK M18-8FBX M18-8FBK M18-10FBX M18-10FBK TRMINAS, KITS AND TOOS 3M Block Forks Non-Insulated Brazed Seam AG M18-4FB/S M18-6FB/S M18-6FB M18-8FB M18-10FB ire UP ire (AG) Thickness ength arton ase M14-6FB/SX M14-6FB/SK M14-6FBX M14-6FBK M14-8FBX M14-8FBK M14-10FBX M14-10FBK M14-6FB/S M14-6FB M14-8FB M14-10FB ire FAX

40 3M Block Forks Non-Insulated Brazed Seam AG UP ire (AG) Thickness ength arton ase M10-6FBK M10-8FBX M10-8FBK M10-10FBX M10-10FBK ire M10-6FB M10-8FB M10-10FB M Block Forks Non-Insulated Butted Seam AG UP ire (AG) Thickness ength Terminals per ase MU18-4FB/SK MU18-6FB/SK MU18-6FBK MU18-8FBK MU18-10FBK ire MU18-4FB/S MU18-6FB/S MU18-6FB MU18-8FB MU18-10FB PHON

41 3M Block Forks Non-Insulated Butted Seam AG UP ire (AG) Thickness ength Terminals per ase MU14-4FB/SK MU14-6FB/SK MU14-6FBK MU14-8FBK MU14-10FBK ire MU14-4FB/S MU14-6FB/S MU14-6FB MU14-8FB MU14-10FB TRMINAS, KITS AND TOOS FAX

42 3M Block Forks Non-Insulated Butted Seam AG UP ire (AG) Thickness ength Terminals per ase MU10-6FBK MU10-8FBK MU10-10FBK MU10-6FB MU10-8FB MU10-10FB ire M Block Forks Vinyl Insulated Brazed Seam AG UP ire (AG) Thickness ength arton ase MV18-4FB/SK MV18-6FB/SX MV18-6FB/SK MV18-6FBX MV18-6FBK MV18-8FBX MV18-8FBK MV18-10FBX MV18-10FBK MV18-4FB/S MV18-6FB/S MV18-6FB MV18-8FB MV18-10FB ire PHON

43 3M Block Forks Vinyl Insulated Brazed Seam AG UP ire (AG) Thickness ength arton ase MV14-4FB/SK MV14-6FB/SX MV14-6FB/SK MV14-6FBX MV14-6FBK MV14-8FBX MV14-8FBK MV14-10FBX MV14-10FBK TRMINAS, KITS AND TOOS MV14-4FB/S MV14-6FB/S MV14-6FB MV14-8FB MV14-10FB ire M Block Forks Vinyl Insulated Brazed Seam AG UP ire (AG) Thickness ength arton ase MV10-6FBX MV10-6FBK MV10-8FBX MV10-8FBK MV10-10FBX MV10-10FBK MV10-6FB MV10-8FB MV10-10FB ire FAX

44 3M Block Forks Vinyl Insulated Butted Seam AG UP ire (AG) Thickness ength Terminals per ase MVU18-4FB/SK MVU18-6FB/SK MVU18-6FBK MVU18-8FBK MVU18-10FBK MVU18-4FB/S MVU18-6FB/S MVU18-6FB MVU18-8FB MVU18-10FB ire M Block Forks Vinyl Insulated Butted Seam AG UP ire (AG) Thickness ength Terminals per ase MVU14-4FB/SK MVU14-6FB/SK MVU14-6FBK MVU14-8FBK MVU14-10FBK MVU14-4FB/S MVU14-6FB/S MVU14-6FB MVU14-8FB MVU14-10FB ire PHON

45 3M Block Forks Vinyl Insulated Butted Seam AG UP ire (AG) Thickness ength MVU10-6FBK MVU10-8FBK MVU10-10FBK MVU10-6FB MVU10-8FB MVU10-10FB ire Terminals per ase TRMINAS, KITS AND TOOS 3M Block Forks Nylon Insulated with Grip AG UP ire (AG) Thickness ength arton ase MNG18-4FB/SK MNG18-6FB/SX MNG18-6FB/SK MNG18-6FBX MNG18-6FBK MNG18-8FBX MNG18-8FBK MNG18-10FBX MNG18-10FBK MNG18-4FB/S MNG18-6FB/S MNG18-6FB MNG18-8FB MNG18-10FB ire FAX

46 3M Block Forks Nylon Insulated with Grip AG UP ire (AG) Thickness ength arton ase MNG14-4FB/SK MNG14-6FB/SX MNG14-6FB/SK MNG14-6FBX MNG14-6FBK MNG14-8FBX MNG14-8FBK MNG14-10FBX MNG14-10FBK MNG14-4FB/S MNG14-6FB/S MNG14-6FB MNG14-8FB MNG14-10FB ire M Block Forks Nylon Insulated with Grip AG UP ire (AG) Thickness ength arton ase MNG10-6FBX MNG10-6FBK MNG10-8FBX MNG10-8FBK MNG10-10FBX MNG10-10FBK MNG10-6FB MNG10-8FB MNG10-10FB ire PHON

47 Flanged Block Forks 3M Flanged Block Forks Non-Insulated Brazed Seam UP ire (AG) Thickness ength Terminals per ase M14-6FFBK M14-8FFBK M14-10FFBK M10-8FFBK M10-10FFBK M18-6FFB M18-8FFB M18-10FFB ire TRMINAS, KITS AND TOOS M14-6FFB M14-8FFB M14-10FFB ire M10-6FFB M10-8FFB M10-10FFB ire FAX

48 3M Flanged Block Forks Non-Insulated Butted Seam UP ire (AG) Thickness ength Terminals per ase MU18-6FFBK MU14-6FFBK MU14-8FFBK MU14-10FFBK MU10-6FFBK MU10-8FFBK MU10-10FFBK MU18-6FFB MU14-6FFB MU14-8FFB MU14-10FFB ire MU10-6FFB MU10-8FFB MU10-10FFB ire PHON

49 3M Flanged Block Forks Vinyl Insulated Brazed Seam UP ire (AG) Thickness ength Terminals per ase MV18-8FFBK MV18-10FFBK MV14-6FFBK MV14-8FFBK MV14-10FFBK MV10-8FFBK MV10-10FFBK MV18-8FFB MV18-10FFB MV14-6FFB MV14-8FFB MV14-10FFB ire TRMINAS, KITS AND TOOS MV10-8FFB MV10-10FFB 8 10 ire FAX

50 3M Flanged Block Forks Vinyl Insulated Butted Seam UP ire (AG) Thickness ength Terminals per ase MVU18-6FFBK MVU18-8FFBK MVU18-10FFBK MVU14-6FFBK MVU14-8FFBK MVU14-10FFBK MVU10-6FFBK MVU10-8FFBK MVU10-10FFBK MVU18-6FFB MVU18-8FFB MVU18-10FFB MVU14-6FFB MVU14-8FFB MVU14-10FFB ire MVU10-6FFB MVU10-8FFB MVU10-10FFB ire PHON

51 3M Flanged Block Forks Nylon Insulated with Grip UP ire (AG) Thickness ength arton ase MNG18-6FFB/SX MNG18-6FFBK MNG18-8FFBX MNG18-8FFBK MNG18-10FFBX MNG18-10FFBK MNG14-6FFB/SX MNG14-6FFBK MNG14-8FFBX MNG14-8FFBK MNG14-10FFBX MNG14-10FFBK MNG10-6FFBX MNG10-6FFBK MNG10-8FFBX MNG10-8FFBK MNG10-10FFBX MNG10-10FFBK TRMINAS, KITS AND TOOS MNG18-6FFB MNG18-8FFB MNG18-10FFB MNG14-6FFB MNG14-8FFB MNG14-10FFB ire MNG10-6FFB MNG10-8FFB MNG10-10FFB ire FAX

52 ocking Forks 3M ocking Forks Non-Insulated Brazed Seam AG UP ire (AG) Thickness ength arton ase M18-4FK M18-6FX M18-6FK M18-8FX M18-10FX M18-10FK M18-4F M18-6F M18-8F M18-10F ire M ocking Forks Non-Insulated Brazed Seam ATG UP ire (AG) Thickness ength arton ase M14-6FX M14-6FK M14-8FX M14-8FK M14-10FX M14-10FK M14-14FX / M14-6F M14-8F M14-10F M14-14F /4 ire PHON

53 3M ocking Forks Non-Insulated Brazed Seam AG UP ire (AG) Max. ock idth Thickness ength arton ase M10-6FX M10-6FK M10-8FX M10-8FK M10-10FX M10-10FK M10-14FX / M10-14FK / M10-6F M10-8F M10-10F M10-14F /4 ire TRMINAS, KITS AND TOOS 3M ocking Forks Non-Insulated Butted Seam AG UP ire (AG) Max. ock idth Thickness ength Terminals per ase MU18-4FK MU18-6FK MU18-8FK MU18-10FK MU18-4F MU18-6F MU18-8F MU18-10F ire FAX

54 3M ocking Forks Non-Insulated Butted Seam AG UP ire (AG) Max. ock idth Thickness ength Terminals per ase MU14-4FK MU14-6FK MU14-8FK MU14-10FK MU14-14FK / MU14-4F MU14-6F MU14-8F MU14-10F MU14-14F /4 ire M ocking Forks Non-Insulated Butted Seam AG UP ire (AG) Max. ock idth Thickness ength Terminals per ase MU10-6FK MU10-8FK MU10-10FK MU10-14FK / MU10-6F MU10-8F MU10-10F MU10-14F /4 ire PHON

55 3M ocking Forks Non-Insulated Brazed Seam AG Product Number UP ire (AG) Max ock idth Thickness ength arton ase MV18-4FX MV18-4FK MV18-6FX MV18-6FK MV18-8FX MV18-8FK MV18-10FX MV18-10FK MV18-4F MV18-6F MV18-8F MV18-10F ire TRMINAS, KITS AND TOOS 3M ocking Forks Non-Insulated Brazed Seam AG Product Number UP ire (AG) Max ock idth Thickness ength arton ase MV14-4FX MV14-6FX MV14-6FK MV14-8FX MV14-8FK MV14-10FX MV14-10FK MV14-14FX / MV14-14FK / MV14-4F MV14-6F MV14-8F MV14-10F MV14-14F /4 ire FAX

56 3M ocking Forks Vinyl Insulated Brazed Seam AG Product Number UP ire (AG) Max ock idth Thickness ength arton ase MV10-6FX MV10-6FK MV10-8FX MV10-8FK MV10-10FX MV10-10FK MV10-14FX / MV10-14FK / MV10-6F MV10-8F MV10-10F MV10-14F /4 ire M ocking Forks Vinyl Insulated Butted Seam AG Product Number UP ire (AG) Max ock idth Thickness ength Terminals per: ase MVU18-4FK MVU18-6FK MVU18-8FK MVU18-10FK MVU18-4F MVU18-6F MVU18-8F MVU18-10F ire PHON

57 3M ocking Forks Vinyl Insulated Butted Seam AG UP ire (AG) Max ock idth Thickness ength MVU14-4F MVU14-6F MVU14-8F MVU14-10F MVU14-14F /4 ire Terminals per ase MVU14-4FK MVU14-6FK MVU14-8FK MVU14-10FK MVU14-14FK / TRMINAS, KITS AND TOOS 3M ocking Forks Vinyl Insulated Butted Seam AG UP ire (AG) Max ock idth Thickness ength MVU10-6FK MVU10-8FK MVU10-10FK MVU10-14FK / Terminals per ase MVU10-6F MVU10-8F MVU10-10F MVU10-14F /4 ire FAX

58 3M ocking Forks Nylon Insulated with Grip AG Product Number UP ire (AG) Max ock idth Thickness ength arton ase MNG18-4FX MNG18-4FK MNG18-6FX MNG18-6FK MNG18-8FX MNG18-8FK MNG18-10FX MNG18-10FK MNG18-4F MNG18-6F MNG18-8F MNG18-10F ire M ocking Forks Nylon Insulated with Grip AG Product Number UP ire (AG) Max ock idth Thickness ength arton ase MNG14-4FX MNG14-4FK MNG14-6FX MNG14-6FK MNG14-8FX MNG14-8FK MNG14-10FX MNG14-10FK MNG14-14FX / MNG14-14FK / MNG14-4F MNG14-6F MNG14-8F MNG14-10F MNG14-14F /4 ire PHON

59 3M ocking Forks Nylon Insulated with Grip AG Product Number UP ire (AG) Max ock idth Thickness ength arton ase MNG10-6FX MNG10-6FK MNG10-8FX MNG10-8FK MNG10-10FX MNG10-10FK MNG10-14FX / MNG10-14FK / MNG10-6F MNG10-8F MNG10-10F MNG10-14F /4 ire TRMINAS, KITS AND TOOS 3M ocking Forks Heat Shrink Brazed Seam AG Product Number UP ire (AG) Thickness ength arton ase MH18-6FX MH18-6FK MH18-8FX MH18-8FK MH18-10FX MH18-10FK MH18-6F MH18-8F MH18-10F ire FAX

60 3M ocking Forks Heat Shrink Brazed Seam AG UP ire (AG) Thickness ength Bag ase MH14-6FX MH14-6FK MH14-8FX MH14-8FK MH14-10FX MH14-10FK MH14-14FX / MH14-14FK / MH14-6F MH14-8F MH14-10F MH14-14F /4 ire M ocking Forks Heat Shrink Brazed Seam AG UP ire (AG) Thickness ength Bag ase MH10-8FX MH10-8FK MH10-10FX MH10-10FK MH10-14FX / MH10-14FK / MH10-8F MH10-10F MH10-14F /4 ire PHON

61 Butt onnectors 3M Butt onnectors Non-Insulated Seamless UP ire (AG) Thickness ength arton ase M18BX M18BK M14BX M14BK M10BX M10BK M18B M14B M10B ire TRMINAS, KITS AND TOOS 3M Butt onnectors Non-Insulated Brazed Seam UP ire (AG) Thickness ength arton ase M8BX M8BK M6BX M6BK M4BX M4BK M8B M6B M4B ire FAX

62 3M arge Gauge Butt onnectors Non-Insulated opper Seamless UP olor ode ire Inner Unit Pack. M2BX Brown 2 AG 1.38" (34,3 mm) 0.34" (8,6 mm) 10/box 100 M1BX Green 1 AG 1.38" (34,3 mm) 0.36" (9,3 mm) 10/box 100 M1/0BX Pink 1/0 AG 1.55" (39,4 mm) 0.41" (10,5 mm) 10/box 100 M2/0BX Black 2/0 AG 1.80" (45,7 mm) 0.46" (11,8 mm) 10/box 100 M3/0BX Orange 3/0 AG 1.90" (48,3 mm) 0.51" (13,1 mm) 3/box 30 M4/0BX Purple 4/0 AG 2.00" (50,8 mm) 0.56" (14,3 mm) 3/box 30 M250BX Yellow 250 kcmil 2.25" (50,8 mm) 0.630" (15,1 mm) 3/box 30 ase Qty. M2BX M1BX M1/0BX ire 2 1 1/0 M2/0BX M3/0BX ire 2/0 3/0 M4/0BX M250BX ire 4/0 250 kcmil 3M Butt onnectors Vinyl Insulated Seamless Product Number UP ire Thickness ength Max Inner Unit Pack. MV18BX AG 0.310" (7,874 mm) 0.030" (0,762 mm) 0.250" (6,35 mm) 0.070" (1,778 mm) 0.145" (3,683 mm) 100/ carton 500 MV18BK AG 0.310" (7,874 mm) 0.030" (0,762 mm) 0.250" (6,35 mm) 0.070" (1,778 mm) 0.145" (3,683 mm) 500 MV14BX AG 0.310" (7,874 mm) 0.030" (0,762 mm) 0.250" (6,35 mm) 0.090" (2,286 mm) 0.170" (4,138 mm) 100/ carton 500 MV14BK AG 0.310" (7,874 mm) 0.030" (0,762 mm) 0.250" (6,35 mm) 0.090" (2,286 mm) 0.170" (4,138 mm) 500 MV10BX AG 0.310" (7,874 mm) 0.040" (1,016 mm) 0.250" (6,35 mm) 0.135" (3,429 mm) 0.250" (6,35 mm) 50/ carton 500 MV10BK AG 0.310" (7,874 mm) 0.040" (1,016 mm) 0.250" (6,35 mm) 0.135" (3,429 mm) 0.250" (6,35 mm) 500 ase Qty. MV18BX MV14BX MV10BX ire PHON

63 3M Butt onnectors Vinyl Insulated Brazed Seam Product Number UP ire (AG) Thickness ength Max arton ase MV8BX MV8BK MV6BX MV6BK MV4BK M Butt onnectors Vinyl Insulated Butted Seam Product Number UP ire (AG) Thickness MV8B MV6B MV4B ire ength Max arton ase MVU18BK MVU14BK MVU10BK TRMINAS, KITS AND TOOS 3M Butt onnectors Nylon Insulated Seamless Product Number UP ire (AG) Thickness ength Max arton ase MN24BX-A MN24BK-A 98203* MN18BX-A MN14BX-A MN14BK-A MN10BX-A * UP prefix MVU18B MVU14B MVU10B ire MN18B MN14B MN10B ire FAX

64 3M Butt onnectors Nylon Insulated with Grip Product Number UP ire (AG) Thickness ength Max arton ase MNG18BX MNG18BK MNG14BX MNG14BK MNG10BX MNG10BK MNG18B MNG14B MNG10B ire M Butt onnectors Nylon Insulated with Grip Moisture Resistant UP ( ) ire (AG) arton ase MNG18BMX-A MNG18BMK-A MNG14BMX-A MNG14BMK-A MNG10BMX-A MNG10BMK-A MNG18BM-A MNG14BM-A MNG10BM-A ire M Butt onnectors Heat Shrink Seamless Product Number UP ire (AG) Thickness ength Bag ase MH18BX MH18BK MH14BX MH14BK MH10BX MH10BK MH18B MH14B MH10B ire PHON

65 3M Step-Down Butt onnectors Non-Insulated Part Number Min. Order Qty. UP Side #1 Side #2 olor Stripe ire Gauge olor Stripe ire Gauge SD-610-S hite AG Red AG SD-621-S Red AG Blue AG SD-632-S Blue AG Yellow AG SD-643-S Yellow AG Red 8 AG 3M Step-Down Butt onnectors Vinyl Part Number Min. Order Qty. UP Side #1 Side #2 olor Stripe ire Gauge olor Stripe ire Gauge SD-610-SP hite AG Red AG SD-621-SP Red AG Blue AG SD-632-SP Blue AG Yellow AG SD-643-SP Yellow AG Red 8 AG 3M Step-Down Butt onnectors Heat Shrink TRMINAS, KITS AND TOOS Part Number Min. Order Qty. UP Heat Shrink Tubing olor Side #1 Side #2 olor Stripe ire Gauge olor Stripe ire Gauge SD-610-SHS Red hite AG Red AG SD-621-SHS Blue Red AG Blue AG SD-632-SHS Yellow Blue AG Yellow AG SD-643-SHS Pink Yellow AG Red 8 AG FAX

66 3M Multiple ire Heat Shrink Butt onnectors Part Number Min. Order Qty. UP ire Gauge Tubing olor olor Stripe on onnector ire M-60-SHS AG lear/hite Dashes Side 1: hite / Side 2: Red One AG / Two AG M-61-SHS AG lear/red Dashes Side 1: Red / Side 2: Blue One AG / Two AG M-62-SHS AG lear/blue Dashes Side 1: Blue / Side 2: Yellow One AG / Two AG M-63-SHS AG lear/yellow Dashes Side 1: Yellow / Side 2: Red One AG / Two AG 3M Step-Down Butt onnectors Non-Insulated Part Number Min. Order Qty. UP onnector ire Gauge Tubing olor 722-NHS AG lear/blue Dashes 718-NHS AG lear/yellow Dashes 112 PHON

67 Female Disconnects 3M Female Disconnects Non-Insulated Butted Seam Product Number UP ire (AG)** Mates with Male Tab idth (') x Thickness ength arton ase MU20-110DFK-A* x MU20-110/32DFK-A* x MU18-187DFK x MU18-250DFX x MU18-250DFK x MU14-110DFX-A* 57448*** x MU14-110DFK* x MU14-187DFX x MU14-187DFK x MU14-250DFX x MU14-250DFK x * Not U isted or SA ertified ** For #10-12 AG, see MI10-250DF *** UP prefix TRMINAS, KITS AND TOOS MU20-110DF MU20-110/32DF MU18-187DF MU18-250DF MU14-110DF MU14-187DF MU14-250DF ire Suggested Mate Male Tab Male Tab MU18-187DM MU18-250DM Male Tab MU14-187DM MU14-250DM 3M Female Disconnects Non-Insulated Interlock Product Number UP ire (AG)** Mates with Male Tab idth (') x Thickness ength arton ase MI18-250DFX x MI18-250DFK x MI14-250DFX x MI14-250DFK x Ml10-250DFX x Ml10-250DFK x MI18-250DF MI14-250DF MI10-250DF ire Suggested Mate MU18-250DF MU14-250DM MU10-250DM FAX

68 3M Female Disconnects Non-Insulated Butted Seam Flag Product Number UP ire (AG) Mates with Male Tab idth (') x Thickness ength arton ase MU18-187DF/FAGX* x MU18-187DF/FAGK* x MU18-250DF/FAGX x MU18-250DF/FAGK x MU14-187DF/FAGX* x MU14-187DF/FAGK* x MU14-250DF/FAGX x MU14-250DF/FAGK x * Not U isted or SA ertified MU18-187DF/FAG MU18-250DF/FAG MU14-187DF/FAG MU14-250DF/FAG ire Suggested Mate Male Tab Male Tab Male Tab Male Tab 3M Female Disconnects Vinyl Insulated Butted Seam Product Number UP ire (AG)** Mates with Male Tab idth (') x Thickness ength arton ase MVU18-187DFK x MVU18-250DFX x MVU18-250DFK x MVU14-110DFK-A* 57438*** x MVU14-187DFX x MVU14-187DFK x MVU14-250DFX x MVU14-250DFK x * Not U isted or SA ertified ** For #10-12 AG, MVU10-250DF has been substituted with MVI10-250DF. *** UP prefix MVU18-187DF MVU18-250DF MVU14-110DF-A MVU14-187DF MVU14-250DF ire Suggested Mate MVU18-187DM MVU18-250DM Male Tab MVU14-187DM MVU14-250DM 114 PHON

69 3M Female Disconnects Vinyl Insulated Interlock UP ire (AG) Mates with Male Tab idth (') x Thickness ength arton ase MVI18-187DFX x MVI18-187DFK x MVI18-250DFX x MVI18-250DFK x MVI14-187DFX x MVI14-187DFK x MVI14-250DFX x MVI14-250DFK x MVI10-250DFX x MVI10-250DFK x MVI18-187DF MVI18-250DF MVI14-187DF MVI14-250DF MVI10-250DF ire Suggested Mate MVU18-187DM MVU18-250DM MVU14-187DM MVU14-250DM MVU10-250DM 3M Female Disconnects Nylon Insulated with Grip UP ire (AG)** Mates with Male Tab idth (') x Thickness ength arton ase MNG18-110DFX-A 57444** x MNG18-110DFK-A 57445** x MNG18-187DFK x MNG18-250DFX x MNG18-250DFK x MNG14-110DFX-A* 57427** x MNG14-110DFK-A* 57437** x MNG14-187DFX x MNG14-187DFK x MNG14-250DFX x MNG14-250DFK x MNG10-375DFK* x * Not U isted or SA ertified ** UP prefix TRMINAS, KITS AND TOOS MNG18-187DF MNG18-250DF MNG14-110DF-A MNG14-187DF MNG14-250DF MNG10-375DF ire Suggested Mate MNG18-187DM MNG18-250DM Male Tab MNG14-187DM MNG14-250DM Male Tab FAX

70 3M Female Disconnects Vinyl Insulated with Grip UP ire (AG) Mates with Male Tab idth (') x Thickness ength arton ase MVG24-110DFK* x MVG24-110/32DFX* x * Not U isted or SA ertified MVG24-110DF MVG24-110/32DF ire Suggested Mate Male Tab Male Tab 3M Female Disconnects Nylon Insulated with Grip Interlock UP ire (AG) Mates with Male Tab idth (') x Thickness ength arton ase MNGI18-250DFX x MNGI18-250DFK x MNGI14-187DFX x MNGI14-187DFK x MNGI14-250DFX x MNGI14-250DFK x MNGI10-250DFX x MNGI10-250DFK x MNGI18-250DF MNGI14-187DF MNGI14-250DF MNGI10-250DF ire Suggested Mate MNG18-250DM MNG14-187DM MNG14-250DM MNG10-250DM 116 PHON

71 3M Female Disconnects Nylon Insulated with Grip Bullet Style UP ( ) ire (AG) Mating Snap S arton ase MNG18-156DFIK-A MNG18-180DFIK-A MNG14-156DFIX-A MNG14-156DFIK-A MNG14-180DFIX-A MNG14-180DFIK-A S S MNG18-156DFI-A MNG18-180DFI-A MNG14-156DFI-A MNG14-180DFI-A ire Suggested Mate MNG18-156DM MNG18-180DM MNG14-156DM MNG14-180DM 3M Female Disconnects Nylon Fully Insulated Butted Seam Product Number UP ire (AG)** Mates with Male Tab idth (') x Thickness D S ength S arton ase MNU18-187DFIX x MNU18-187DFIK x MNU18-250DFlX x MNU18-250DFlK x MNU14-187DFIX x MNU14-187DFIK x MNU14-250DFlX x MNU14-250DFlK x Not U isted or SA ertified **For #10-12 AG, see MNI10-250DFI TRMINAS, KITS AND TOOS D MNU18-187DFI MNU18-250DFI MNU14-187DFI MNU14-250DFI ire Suggested Mate MNU18-187DMI MNU18-250DMI MNU14-187DMI MNU14-250DMI FAX

72 3M Female Disconnects Nylon Fully Insulated with Grip Product Number UP ire (AG) Mates with Male Tab idth (') x Thickness D ength arton ase MNG18-187DFIX x MNG18-187DFIK x MNG18-250DFlX x MNG18-250DFlK x MNG14-187DFIX x MNG14-187DFIK x MNG14-250DFlX x MNG14-250DFlK x D MNG18-187DFI MNG18-250DFI MNG14-187DFI MNG14-250DFI ire Suggested Mate MNG18-187DMI MNG18-250DMI MNG14-187DMI MNG14-250DMI 3M Female Disconnects Nylon Fully Insulated Interlock UP ire (AG) Mates with Male Tab idth (') x Thickness ength arton ase MNI18-250DFIX x MNI18-250DFIK x MNI14-250DFlX x MNI14-250DFlK x MNI10-250DFIX x MNI10-250DFIK x MNI18-250DFI MNI14-250DFI MNI10-250DFI ire Suggested Mate MN18-250DMI MNU14-250DMI MNU10-250DMI 118 PHON

73 3M Female Disconnects Nylon Fully Insulated with Grip Interlock UP ire (AG) Mates with Male Tab idth (') x Thickness ength arton ase MNGI18-250DFIX x MNGI18-250DFIK x MNGI14-250DFIX x MNGI14-250DFIK x MNGI10-250DFIX x MNGI10-250DFIK x M Female Disconnects T-Tap Nylon Insulated Self-Stripping UP MNGI18-250DFI MNGI14-250DFI MNGI10-250DFI ire Suggested Mate MNG18-250DMI MNG14-250DMI MNG10-250DMI ire (AG) Mates with Male Tab idth (') x Thickness M arton ase 951X x K x X x K x X x K x TRMINAS, KITS AND TOOS ire Suggested Mate MNG18-250DMI MNG14-250DMI MNG10-250DMI H FAX

74 3M Female Disconnects Heat Shrink Nylon Fully Insulated UP ire (AG) Mates with Male Tab idth (') x Thickness D ength Bag ase MNHU18-250DFIX* x MNHU18-250DFIK* x MNHU14-250DFIX* x MNHU14-250DFIK* x MNHU10-250DFIX x MNHI10-250DFIK x *indowless receptacle D MNHU18-250DFI MNHU14-250DFI MNHI10-250DFI ire Suggested Mate MNHU18-250DMI MNHU14-250DMI MNHU10-250DMI 3M Female Disconnects Fuseholder Polypropylene Insulated Self-Stripping UP ire (AG) Mates with Male Tab idth (') x Thickness H D arton ase 972X x K x For use with flat blade automotive type fuse of 30V or less. D 972 ire Suggested Mate ATO Auto Fuse 120 PHON

75 Male Disconnects 3M Male Disconnects Non-Insulated Butted Seam UP ire (AG) Male Tab idth (') x Thickness MU18-187DM MU18-250DM MU14-187DM MU14-250DM MU10-250DM ire Suggested Mate MU18-187DF MU18-250DF MU14-187DF MU14-250DF MU10-250DF ength arton ase MU18-187DMK x MU18-250DMK x MU14-187DMK x MU14-250DMX x MU14-250DMK x MU10-250DMX x MU10-250DMK x M Male Disconnects Vinyl Insulated Butted Seam UP ire (AG) Male Tab idth (') x Thickness ength arton ase MVU18-187DMK x MVU18-250DMX x MVU18-250DMK x MVU14-187DMX x MVU14-187DMK x MVU14-250DMX x MVU14-250DMK x MVU10-250DMX x MVU10-250DMK x TRMINAS, KITS AND TOOS MVU18-187DM MVU18-250DM MVU14-187DM MVU14-250DM MVU10-250DM ire Suggested Mate MVU18-187DF MVU18-250DF MVU14-187DF MVU14-250DF MVI10-250DF FAX

76 3M Male Disconnects Vinyl Insulated Butted Seam Bullet Style Product Number UP ( ) ire (AG) Mating Snap S arton ase MVU18-156DMK-A MVU18-180DMK-A MVU14-156DMX-A MVU14-156DMK-A MVU14-180DMX-A MVU14-180DMK S S S S MVU18-156DM MVU18-180DM MVU14-156DM MVU14-180DM ire Suggested Mate MNU18-156DFI MNU18-180DFI MNU14-156DFI MNU14-180DFI 3M Male Disconnects Nylon Insulated with Grip Product Number UP ire (AG) Male Tab idth (') x Thickness ength arton ase MNG18-187DMK x MNG18-250DMX x MNG18-250DMK x MNG14-187DMX x MNG14-187DMK x MNG14-250DMX x MNG14-250DMK x MNG10-250DMX x MNG10-250DMK x MNG18-187DM MNG18-250DM MNG14-187DM MNG14-250DM MNG10-250DM ire Suggested Mate MNG18-187DF MNG18-250DF MNG14-187DF MNG14-250DF MNGI10-250DF 122 PHON

77 3M Male Disconnects Nylon Insulated with Grip Bullet Style Product Number UP ( ) ire (AG) Mating Snap S arton ase MNG18-156DMK-A MNG18-180DMK-A MNG14-156DMX-A MNG14-156DMK-A MNG14-180DMK-A S S MNG18-156DM-A MNG18-180DM-A MNG14-156DM-A MNG14-180DM-A ire Suggested Mate MNG18-156DFI MNG18-180DFI MNG14-156DFI MNG14-180DFI 3M Male Disconnects Nylon Fully Insulated Butted Seam Product Number UP ire (AG) Male Tab idth (') x Thickness S D ength S arton ase MNU18-187DMIX x MNU18-187DMIK x MNU18-250DMIX x MNU18-250DMIK x MNU14-187DMIX x MNU14-187DMIK x MNU14-250DMIX x MNU14-250DMIK x MNU10-250DMIX x MNU10-250DMIK x TRMINAS, KITS AND TOOS D MNU18-187DMI MNU18-250DMI MNU14-187DMI MNU14-250DMI MNU10-250DMI ire Suggested Mate MNU18-187DFI MNU18-250DFI MNU14-187DFI MNU14-250DFI MNI10-250DFI FAX

78 3M Male Disconnects Nylon Fully Insulated with Grip Product Number UP ire (AG) Male Tab idth (') x Thickness D ength arton ase MNG18-187DMIX x MNG18-187DMIK x MNG18-250DMIX x MNG18-250DMIK x MNG14-187DMIX x MNG14-187DMIK x MNG14-250DMIX x MNG14-250DMIK x MNG10-250DMIX x MNG10-250DMIK x D MNG18-187DMI MNG18-250DMI MNG14-187DMI MNG14-250DMI MNG10-250DMI ire Suggested Mate MNG18-187DFI MNG18-250DFI MNG14-187DFI MNG14-250DFI MNGI10-250DFI 3M Male Disconnects Heat Shrink Nylon Fully Insulated Butted Seam Product Number UP ire (AG) Male Tab idth (') x Thickness D ength arton ase MNHU18-250DMIX x MNHU18-250DMIK x MNHU14-250DMIX x MNHU14-250DMIK x MNHU10-250DMIX x MNHU10-250DMIK x D MNHU18-250DMI MNHU14-250DMI MNHU10-250DMI ire Suggested Mate MNHU18-250DFI MNHU14-250DFI MNHI10-250DFI 124 PHON

79 Flags and Multi-Stack Disconnects 3M Flags Non-Insulated Ring Type Product Number UP ire (AG) Thickness ength Terminals per ase MU18-6R/FAGK MU18-6R/FAG 6 ire M Multi-Stack Disconnects Vinyl Insulated Butted Seam UP ( ) ire (AG) Mates with Female & Male idth (') x Thickness arton ase MVU18-250DMFX-A x MVU18-250DMFK-A x MVU14-250DMFX-A x MVU14-250DMFK-A x TRMINAS, KITS AND TOOS MVU18-250DMF-A MVU14-250DMF-A ire Suggested Mate Male/Female Male/Female FAX

80 3M Multi-Stack Disconnects Vinyl Insulated Butted Seam UP ( ) ire (AG) Mates with Female & Male idth (') x Thickness Terminals per ase MNG18-250DMFX-A x MNG18-250DMFK-A x MNG14-250DMFX-A x MNG14-250DMFK-A x MNG18-250DMF-A MNG14-250DMF-A ire Suggested Mate Male/Female Male/Female Adapters 3M Adapters Non-Insulated Double Male-Female UP Mates with Female & Male idth (') x Thickness arton ase MA250DMFMX-A* 57452** x MA250DMFMK-A* 57451** x MA250DMMFX x MA250DMMFK x * Not U isted or SA ertified ** UP prefix MA250DMFM-A MA250DMMF Suggested Mate Males (2)/Female Males (2)/Female Suggested Mate Male/Female Male/Female 126 PHON

81 3M Adapters Non-Insulated Male Fuse-lip Suggested Mate Suggested Mate UP MA250DM/FUS Female/Fuse Male/Female Male Tab idth (') x Thickness Terminals per ase MA250DM/FUSK x M Adapters Non-Insulated Male Rectangular Tongue UP Male Tab idth (') x Thickness Terminals per ase MA250DM/6RRK x MA250DM/8RRK x MA250DM/10RRK x TRMINAS, KITS AND TOOS MA250DM/6RR MA250DM/8RR MA250DM/10RR Suggested Mate Female Disconnect Female Disconnect Female Disconnect 3M Adapters Vinyl Insulated Double Female Disconnect UP Male Tab idth (') x Thickness Terminals per ase MVA156DFFIK MVA180DFFIK S S Suggested Mate Suggested Mate MVA156DFFI Male Bullets Male/Female MVA180DFFI Male Bullets Male/Female FAX

82 High Temperature 3M High Temperature Ring Tongues* Butted Seam 900 F (482 ) UP ire (AG) Thickness ength arton ase MU18-6RHT/SX MU18-6RHT/SK MU18-10RHTX MU18-10RHTK MU14-6RHT/SX MU14-6RHT/SK MU14-10RHTX MU14-10RHTK MU14-14RHTX / MU14-14RHTK / MU10-10RHTX MU10-10RHTK MU10-14RHTK / MU8-14RHT/SK / MU6-38RHTK / MU4-38RHTK / MU18-6RHT/S MU18-10RHT MU14-6RHT/S MU14-10RHT MU14-14RHT ire / MU10-10RHT MU10-14RHT MU8-14RHT/S MU6-38RHT MU4-38RHT ire / /4 8 3/8 6 3/8 4 *Steel with nickel plating 128 PHON

83 3M High Temperature Standard Forks* Butted Seam 900 F (482 ) UP ire (AG) Thickness ength Terminals per ase MU18-10FHTK MU14-10FHTK MU10-10FHTK MU18-10FHT MU14-10FHT MU10-10FHT ire M High Temperature Block Forks* Butted Seam 900 F (482 ) UP ire (AG) Thickness ength Terminals per ase MU18-6FBHTK MU14-6FBHTK TRMINAS, KITS AND TOOS 3M High Temperature Butt onnectors* Butted Seam 900 F (482 ) UP MU18-6FBHT ire (AG) Thickness MU14-6FBHT 6 6 ire ength arton ase MU18BHTX MU18BHTK MU14BHTX MU14BHTK MU10BHTX MU10BHTK MU18BHT MU14BHT MU10BHT ire *Steel with nickel plating FAX

84 3M High Temperature Female Disconnects* Butted Seam 900 F (482 ) UP ire (AG) Mates with Male Tab idth (') x Thickness ength arton ase MU14-187DFHTK x MU14-250DFHTX x MU14-250DFHTK x MU14-187DFHT MU14-250DFHT ire Suggested Mate High Temperature Male Tab MU14-250DMHT 3M High Temperature Female Disconnects* Butted Seam Flag 900 F (482 ) UP ire (AG) Mates with Male Tab idth (') x Thickness ength Terminals per ase MU14-250DFHT/FAGK x MU14-250DFHT/FAG ire Suggested Mate MU14-250DMHT 3M High Temperature Male Disconnects* Butted Seam 900 F (482 ) UP ire (AG) Mates with Male Tab idth (') x Thickness ength arton ase MU14-250DMHTX x MU14-250DMHTK x MU14-250DMHT ire Suggested Mate MU14-250DFHT *Steel with nickel plating 130 PHON

85 losed nd onnectors 3M Scotchlok losed nd onnector, Nylon Insulated, opper Insert S-11-A and S-31-A 3M Scotchlok electrical crimp sleeve connectors make fast (copper) are insulated, closed-end crimp sleeve connectors. ith a rugged, yet resilient nylon insulator, use these OM applications. S-11-A Solid/Stranded AG ire ombinations: opper ire Only, U ONY IR OMBINATIONS 2 to 5 #22 1 to 4 #22 w/ 1 or 2 #20 TRMINAS, KITS AND TOOS 1 to 3 #22 w/ 1 #18 1 #22 w/ 1 #16 2 or 3 #20 S-31-A Solid/Stranded AG ire ombinations: opper ire Only, U ONY IR OMBINATIONS 1 #22 w/ 1 #12 or #10 1 #20 w/ 1 #16 w/ 1 #12 1 #22 w/ 2 #14 or #16 1 #18 w/ 1 #14 1 #22 w/ 1 #20 w/ 1 #12 or #14 1 #18 w/ 1 #12 1 #22 w/ 1 #18 w/ 1 #12 or #14 1 #18 w/ 2 #16 1 #22 w/ 1 #16 w/ 1 #12 or #14 1 #18 w/ 1 #16 w/ 1 #12 or #14 1 #22 w/ 1 #14 w/ 1 #12 1 #16 w/ 1 #12 or #14 1 or 2 #20 w/ 1 or 2 #14 3 #16 1 or 2 #20 w/ 1 #12 1 #14 w/ 1 #12 1 #20 w/ 1 #10 2 #14 FAX

86 Specification Information for Nylon Insulated losed nd onnectors (opper Insert) UP ( ) ire (AG) Voltage Temperature Rating S-11-A boxed V 221 F (105 ) bulk V 221 F (105 ) S-31-A boxed V 221 F (105 ) bulk V 221 F (105 ) Ordering Information for Nylon Insulated losed nd onnectors (opper Insert) Product Number UP ( ) Unit Pack ase Qty S-11-A boxed 100/box bulk 1,000/bag 10,000 S-31-A boxed 50/box bulk 500/bag 5, PHON

87 Parallel onnectors 3M Parallel onnectors Non-Insulated Seamless UP ire (AG) M14P opper ire ombinations M10P ire Thickness In MA Terminals per ase M14PK See chart below M10PK See chart below ROMMNDD STRANDD IR OMBINATIONS MVU18P 1 #22 to 1 #22, 20, 18, 16 1 #20 to 1 #20, 18, 16 1 #18 to 1 #18 Min. MA: 1280, Max. MA: 3600 M14P AND MVU14P 1 #22 to 1 #22, 20, 18, 16, 14 1 #20 to 1 #20, 18, 16, 14 1 #18 to 1 #18, 16, 14 1 #16 to 1 #16 Min. MA: 1280, Max. MA: 5730 M10P 1 #18 to 1 #18, 16, 14, 12, 10 1 #16 to 1 #16, 14, 12, 10 1 #14 to 1 #14, 12, 10 1 #12 to 1 #12 Min. MA: 3240, Max. MA: MVU10P 1 #18 to 1 #18, 16, 14, 12, 10 1 #16 to 1 #16, 14, 12, 10 1 #14 to 1 #14, 12 Min. MA: 3240, Max. MA: Proper ire Insertion Parallel onnectors TRMINAS, KITS AND TOOS 3M Parallel onnectors Vinyl Insulated Butted Seam UP ire (AG) opper ire ombinations Thickness ength In MA arton ase MVU18PK see chart above MVU14PX see chart above MVU14PK see chart above MVU10PK see chart above MVU18P MVU14P MVU10P ire ire FAX

88 Pin Terminals 3M Pin Terminals Non-Insulated UP ( ) ire (AG) Pin P arton ase MU18-47PX MU18-47PK MU14-47PX MU14-47PK MU10-55PX 49420* MU10-55PK * UP prefix P P P ire 3M Pin Terminals Vinyl Insulated Butted Seam UP ( ) MU18-47P ire (AG) MU14-47P Pin P MU10-55P arton ase MVU18-47PX MVU18-47PK MVU14-47PX MVU14-47PK MVU10-55PX MVU10-55PK P P P ire 3M Pin Terminals Nylon Insulated with Grip UP ( ) MVU18-47P ire (AG) MVU14-47P Pin P MVU10-55P arton ase MNG18-47PX MNG18-47PK MNG14-47PX MNG14-47PK MNG10-55PX MNG10-55PK P P P ire MNG18-47P MNG14-47P MNG10-55P PHON

89 3M Highland Bagged Terminals for use in the assembly and maintenance of electrical sys- performance in a variety of types of general applications. terminals are the optimal choice for smaller jobs. 3M Highland Rings Non-Insulated ire or Tab UP Terminals/Bag Bags/ase R R / R10-14Q / R R R R R R R R R R R R TRMINAS, KITS AND TOOS Product Number ending in Q=25; =50; =100 FAX

90 3M Highland Rings Vinyl Insulated ire or Tab UP Terminals/Bag Bags/ase RV RV RV10-8Q RV RV10-10Q RV / RV10-14Q / RV / RV10-38Q / RV10-516Q / RV RV RV RV RV RV RV / RV / RV / RV RV RV RV RV RV M Highland Standard Forks Non-Insulated ire or Tab UP Terminals/Bag Bags/ase F F PHON Product Number ending in Q=25; =50; =100

91 3M Highland Standard Forks Vinyl Insulated ire or Tab UP Terminals/Bag Bags/ase FV FV10-8Q FV FV10-10Q FV FV FV FV FV M Highland Block Forks Non-Insulated ire or Tab UP Terminals/Bag Bags/ase BF10-8Q BF BF10-10Q BF BF BF BF BF BF TRMINAS, KITS AND TOOS Product Number ending in Q=25; =50; =100 FAX

92 3M Highland Block Forks Vinyl Insulated ire or Tab UP Terminals/Bag Bags/ase BFV BFV BFV10-8Q BFV BFV10-10Q BFV BFV BFV BFV BFV BFV BFV BFV BFV BFV BFV M Highland ocking Forks Non-Insulated ire or Tab UP Terminals/Bag Bags/ase F10-8Q F10-10Q F10-14Q F F F F F M Highland ocking Forks Vinyl Insulated ire or Tab UP Terminals/Bag Bags/ase FV10-6Q FV10-8Q FV10-10Q FV10-14Q FV FV FV FV FV PHON Product Number ending in Q=25; =50; =100

93 3M Highland Butt Splices ire or Tab UP Terminals/Bag Bags/ase BS NA BS10Q NA BS NA BS NA BS NA M Highland Butt Splices Vinyl Insulated ire or Tab UP Terminals/Bag Bags/ase BSV NA BSV10Q NA BSV NA BSV NA BSV NA BSV NA M Highland Female Disconnects Non-Insulated ire or Tab UP Terminals/Bag Bags/ase FD FD FD FD FD FD FD TRMINAS, KITS AND TOOS Product Number ending in Q=25; =50; =100 FAX

94 3M Highland Female Disconnects Vinyl Insulated ire or Tab UP Terminals/Bag Bags/ase FDV FDV10-250Q FDV FDV FDV FDV FDV FDV FDV FDV M Highland Female Disconnects Nylon Fully Insulated ire or Tab UP Terminals/Bag Bags/ase FDI FDI10-250Q FDI FDI FDI FDI FDI FDI FDI M Highland Male Tabs Non-Insulated ire or Tab UP Terminals/Bag Bags/ase MT10-250Q MT MT MT PHON Product Number ending in Q=25; =50; =100

95 3M Highland Male Tabs Nylon Fully Insulated ire or Tab UP Terminals/Bag Bags/ase MTI MTI10-250Q MTI MTI MTI MTI MTI MTI MTI M Highland Male Tabs Vinyl Insulated ire or Tab UP Terminals/Bag Bags/ase MTV MTV10-250Q MTV MTVI MTV MTV MTV MTV M Highland Snap Plugs Vinyl Insulated ire or Tab UP Terminals/Bag Bags/ase SPV SPV TRMINAS, KITS AND TOOS 3M Highland Snap Receptacles Nylon Fully Insulated ire or Tab UP Terminals/Bag Bags/ase SRI Product Number ending in Q=25; =50; =100 FAX

96 Kits 3M Scotchlok Terminal Kit STK-1 (Filled) frequently purchased low voltage termination products, 3M Scotchlok Steel Terminal Box (mpty) terminal compartments, one tool compartment and two miscellaneous compartments. Order contents separately. The STK-1 is constructed of durable metal with individual product compartments. hile the compartments keep you organized, the rugged metal frame protects the contents even in the harshest environment. Overall box size is Product UP olor Boxes/ Bag Boxes/ ase Scotchlok Terminal Box STK Red N/A 1 ontents of STK-1 Product Quantity Scotchlok rimping Tool TH M Scotchode Tape Dispenser STD M able Ties M able Ties M Highland Ring Tongue Terminal RV M Highland Ring Tongue Terminal RV M Highland Ring Tongue Terminal RV M Highland Ring Tongue Terminal RV M Highland Ring Tongue Terminal RV M Highland Ring Tongue Terminal RV M Highland Block Fork Terminals BFV M Highland Block Fork Terminals BFV M Highland Block Fork Terminals BFV M Highland Block Fork Terminals BFV M Highland Butt onnectors BSV M Highland Butt onnectors BSV M Highland Butt onnectors BSV M Highland Female Disconnects FDV Product UP olor Boxes/ Bag Boxes/ ase Scotchlok Steel Terminal Box Red 1 6 Note: Box only 3M Scotchlok Plastic Terminal Box (mpty) This is a plastic organizing box for terminals. It is divided into 13 compartments, including one size to hold a crimping tool. Order contents separately. Overall box size Product UP olor Boxes/ Bag Boxes/ ase Scotchlok Plastic Terminal Box lear 1 24 Note: Box only 142 PHON