New Additional Stabilizers

Transcription

1 New Additional Stabilizers The new additional stabilizers are adapted optimally to the demands of PALFINGER and developed in close cooperation with the dealers. A variety of improvements make the stabilizers to an ideal accessory in combination with a PALFINGER crane. An optimum power to weight ratio due to the finit elements calculation and the use of high quality steel increases the possible pay load and minimizes the fuel consumption. The improved mounting possibility as well as an included terminal box saves assembly times and facilitates installation. Up to 50% improved support moment Protected hoses and cables due to inside mounting Maintenance free outrigger system Integrated return oil utilisation High quality KTL coating prevents corrosion An adjustment up to 100 mm in support height of the is possible Versions of mounting the stabilizers: A: Mounting above the vehicle frame B: Mounting below the vehicle frame BS00X-SA-A: All options listed below are selectable seperately ISC The ISC- system indicates the stability of the crane. The additional stabilizers are controlled, if the outrigger is fully, semi or not extended, as well as if the s are fully extended. Depending on this information the ISC-system regulates the lifting force of the crane (integrated stability control) Additional Stabilizers AUSW A limiting switch monitors the fully retracted position of the outrigger. The completely retracted position is indicated by an optical and acoustical signal in the drivers cab (transport position monitoring) ABSTW A limiting switch monitors the fully retracted position of the outrigger and the s. The completely retracted position is indicated by an optical and acoustical signal in the drivers cab (transport position monitoring) 74

2 BEL LED- warning light on the s for better visibility of the position and more safety for the crane operator and pedestrians. The wiring is inside of the outrigger. The LED stripes are included in the delivery of the outrigger 12V/24V If you have selected one of the previous features you have to indicate the correct voltage rate M - JIC Option of screw joint, metric 24 olive tube fitting (M) and 37 flare type fitting (JIC) Cover Lateral covering of the outrigger box to protect the inner hoses and electrical wires from the ingress of dirt Colour The standard colour of the outrigger is black (KTL painting). Optional the outrigger can be delivered in other colours (RAL). Please note that a special colour will extend the delivery time Conservation Similar to the crane, the stabilizer system can be treated with a protective, washable layer EKAT Spare part catalogue The options AUSW, ISC as well as the information of the electric are obligatory to fulfil the new norm EN12999:2010 Versions of the s All the s, fitted with 10 tiltable stabilizer pads, are conform the EN12999:2010. The stabilizer pads adapt optimally to the respective incline of the subsoil. STZS: rigid STZY: 180 hydraulically tiltable STZY3: +/- 55 manually tiltable An extension of the is possible. After checking for restrictions, respectively approval of PALFINGER based on the current technical data sheets, the extensions are seperately orderable. HXE7886 extension by 100 mm HXE3507 extension by 200 mm Additional Stabilizers 75

3 Zusatzabstützungen Zusatzabstützungen Ausleger Abstützweite Max. Stützkraft Gewicht Abstützzylinder Merkmal A* B** Typ (mm) (kn) (kg) BS001-SA-A starr 2100**** KSZ00233A STZS kurz 2200**** KSZ00234A STZS lang 2300**** KSZ00243A STZY3 BS002-SA-A hydraulisch KSZ00233A STZS kurz KSZ00234A STZS lang KSZ00243A STZY3 BS002-SA-M manuell KSZ00233A STZS kurz KSZ00234A STZS lang KSZ00243A STZY3 BS003-SA-A hydraulisch KSZ00159A STZS kurz KSZ00160A STZS lang KSZ00190A STZY3 KSZ00192A STZY KSZ00161A STZS kurz KSZ00162A STZS lang BS004-SA-A hydraulisch KSZ00159A STZS kurz KSZ00160A STZS lang KSZ00190A STZY3 KSZ00192A STZY BS005-SA-A hydraulisch KSZ00161A STZS kurz KSZ00162A STZS lang BS006-SA-A hydraulisch KSZ00167A STZS kurz KSZ00168A STZS lang KSZ00193A STZY3 KSZ00194A STZY BS007-SA-A hydraulisch KSZ00169A STZS kurz KSZ00170A STZS lang BS1003A hydraulisch BS1284 STZS BS1285 STZS BS1321 STZS BS1242A-1 hydraulisch BS1284 STZS BS1285 STZS BS1321 STZS BS085A*** hydraulisch, Inkl. höhen- STZS verstärkte verstellbaren Version BS086*** hydraulisch Inkl. schwenk- STZY baren BS1286*** hydraulisch Inkl. automatisch STZY hochschwenkbaren BS1298*** hydraulisch Inkl. starren STZS *) Montage oberhalb des Fahrzeugrahmens, **) Montage unterhalb des Fahrzeugrahmens, ***) Die CE Version ist nur über das Tuning Center erhältlich, ****) einmalige fixe Einstellung beim Aufbau des Querholms

4 Additional stabilizer range BS 000 X = for mounting above the frame Y = for mounting below the frame STZS = rigid STZY3 =+/- 55 manual tiltable STZY =180 hydraulically tiltable STT = extension for stabilizer ram available STZS3 = Height adjustability down up MEASUREMENTS TYPE F max. [kn] Outrigger Supportwidth B [mm] STZS3 X Y Supporting cylinder Supporting cylinder Weight(kg) STZY3 STT A C D E/E1 F/F1 G H I J Height ajustment Replace [metric] [JIC] Cyl. total STZS (manual) STZY (hydr.) [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] down up model X KSZ00233A KSZ00237A short X E 716 F * X KSZ00234A KSZ00238A long 2100* E 908 F BS rigid 2200* X KSZ00243A KSZ00244A X X 2200* E 854 F BS * X KSZ00235A KSZ00239A short X 2300* E1 401 F X KSZ00236A KSZ00240A long X E1 556 F X KSZ00233A KSZ00237A short X E 686 F X KSZ00234A KSZ00238A long E 878 F BS002H 90 hydraulical 3400 X KSZ00243A KSZ00244A X X E 824 F BS1296A X KSZ00235A KSZ00239A short X E1 401 F X KSZ00236A KSZ00240A long X E1 556 F X KSZ00233A KSZ00237A short X E 686 F X KSZ00234A KSZ00238A long E 878 F BS002M 90 manual 3400 X KSZ00243A KSZ00244A X X E 824 F BS876C X KSZ00235A KSZ00239A short X E1 401 F X KSZ00236A KSZ00240A long X E1 556 F X KSZ00159A KSZ00174A short X E 675 F X KSZ00160A KSZ00175A long X E 874 F BS hydraulical 4403 X KSZ00190A KSZ00210A X X E 825 F X KSZ00192A KSZ00211A X X E 881 F X KSZ00161A KSZ00178A short X E1 406 F / 100 X KSZ00162A KSZ00180A long X E1-576 F / 100 X KSZ00159A KSZ00174A short X E- 675 F BS hydraulical 5200 X KSZ00160A KSZ00176A long X E- 874 F X KSZ00190A KSZ00210A X X E- 825 F X KSZ00192A KSZ00211A X X E- 881 F BS hydraulical 5200 X KSZ00161A KSZ00178A short X E1-400 F / X KSZ00162A KSZ00180A long X E1-570 F / 100 X KSZ00167A KSZ00182A short X E- 650 F BS hydraulical 5900 X KSZ00168A KSZ00184A long E- 849 F X KSZ00193A KSZ00212A X X E- 800 F BS446A X KSZ00194A KSZ00213A X X E- 856 F BS hydraulical 5900 X KSZ00169A KSZ00186A short X E1-400 F / X KSZ00170A KSZ00188A long X E1-570 F / 100 BS423A X BS1284 no JIC standard E F BS1003A 180 hydraulical 7105 X BS1285 no JIC long E1-412 F x X BS1321 no JIC short E1-373 F X BS1284 no JIC standard E F BS1242A hydraulical 8500 X BS1285 no JIC long E1-452 F x X BS1321 no JIC short E1-414 F * depending on the first setting in the workshop These data correspond to the state and is not subject to maintenance. Issued Dimensions may vary. Subject to technical changes, errors and translation mistakes

5 Options for the additional stabilizer range Extensions for the additional Stabilizer range BS 000 CODE *AUSW / AUSVW DESCRIPTION A limiting switch monitors the fully retracted position of the outrigger. The completely retracted position is indicated by an optical and acoustical signal in the drivers cab. (transport position monitoring) BS001 BS002H BS002M BS003 BS004 BS005 BS006 BS007 BS1003A BS1242A-1 STT = extension for supporting cylinder available *HPSC HPSC detects the exact position and state of each stabilizer and calculates the maximum stability for every individual stabilizer situation. *PAL50 / PAL150 If you have selected HPSC you have to indicate the type of PALTRONIC on the crane. ATTENTION: the two system are not interchangeable TYPE Extension For BS ABSTW Monitors the fully retracted position of the outrigger and the. The completely retracted position is indicated by an optical and acoustical signal in the drivers cab. (transport position monitoring) HXE [mm] BS001 / BS002H / BS002M BEL LED- warning light on the s for better visibility of the position and more safety for the crane operator and pedestrians HXE [mm] BS001 / BS002H / BS002M *12V / 24V If one of the previous features is selected, the voltage has to be indicated. HXE [mm] BS003 / BS004 / BS005 / BS006 / BS007 *ADECK This is an additional covering of the outrigger box mounted on both sides to protect the hoses and the electrical wires in the outrigger. (Included on HPSC at BS1003A and BS1242A-1) HXE [mm] BS003 / BS004 / BS005 / BS006 / BS007 JIC In standard the fittings are metric 24 olive tube fittings, optional the possibility of 37 flare type fitting (JIC) RAL Standard colour of the outrigger is black (KTL painted) optional we can deliver the outrigger in a requested colour (RAL).Please note that a colour will extend the delivery time about 10 working days. KRANK Similar to the crane we can deliver the stabilizer system with a washable protection coat. EKAT These additional stabilizer system are available with a printed spare part catalogue. * EN12999:2011 OBLIGATORY = option = not available These data correspond to the state and is not subject to maintenance. Issued Dimensions may vary. Subject to technical changes, errors and translation mistakes