EPSILON UNLIMITED. English

Size: px

Start display at page:

Download "EPSILON UNLIMITED. English"

Jocelyn George
6 years ago
Views:

1 EPSILON UNLIMITED English

2 Content page E65L, E75L 4 5 E90L, E110L 6 7 Power + Speed + Precision = EPSILON for more applications than you imagine E140L, E160L 8 9 E190LS, E250L, E260L E65Z, E75Z E90Z, E110Z, E120Z E140Z, E165Z E250Z 18 Equipment Timber grabs 29 Accessories 29 E380L 30 3

3 76 E65L / E75L VA short stabilizer legs crane type E65L E75L lifting moment net [knm] slewing torque net [knm] slewing angle [ ] max. outreach [m] 7,6 7,6 operating pressure [bar] max. pump capacity [l/min] 2x60 2x60 dead weight [kg] E65L76 / E75L76 4 5

82 E90L / E110L 80 97 80V 74 67 N short column E90L82 / E110L82 E90L97 / E110L97 6

net [knm] 89 89 86 89 90 90 107 107 103 105 105 107 slewing torque net [knm] 24 27

outreach [m] 8,2 8,0 9,7 8,0 7,4 6,7 8,2 8,0 9,7 8,0 7,4 6,7 operating pressure [bar]

4 82 E90L / E110L V N short column E90L82 / E110L82 E90L97 / E110L97 6 crane type E90L E110L boom system V V lifting moment net [knm] slewing torque net [knm] slewing angle [ ] max. outreach [m] 8,2 8,0 9,7 8,0 7,4 6,7 8,2 8,0 9,7 8,0 7,4 6,7 operating pressure [bar] max. pump capacity [l/min] 2x x60-70 dead weight [kg] V

82 E140L / E160L 80 96 103 79V 94V E140L82 / E160L82 E140L96 /

103 79V 94V 82 80 96 103 79V 94V lifting moment net [knm] 134 136

5 82 E140L / E160L V 94V E140L82 / E160L82 E140L96 / E160L96 N short column crane type E140L E160L boom system V 94V V 94V lifting moment net [knm] slewing torque net [knm] slewing angle [ ] max. outreach [m] 8,2 8,0 9,6 10,3 7,9 9,4 8,2 8,0 9,6 10,3 7,9 9,4 operating pressure [bar] max. pump capacity [l/min] 2x80 2x80 dead weight [kg] V 94V 8 9

82 E190LS / E250L E260L 87 95 107 128 130 FD250 83 88 96 E190LS82 / E250L82

95 107 83 88 96 lifting moment net [knm] 181 177 165 157 152 144 241 230 221

6 82 E190LS / E250L E260L FD E190LS82 / E250L82 E260L83 crane type E190LS E250L E260L boom system lifting moment net [knm] slewing torque net [knm] slewing angle [ ] max. outreach [m] 8,2 8,7 9,5 10,7 12,8 13,0 8,2 8,7 9,5 10,7 8,3 8,8 9,6 operating pressure [bar] max. pump capacity [l/min] 2x90 2x90 2x90 dead weight [kg] dead weight SRX47 [kg] 450 dead weight FD250 [kg]

7 72 E65Z / E75Z VA short stabilizer legs crane type E65Z E75Z lifting moment net [knm] slewing torque net [knm] slewing angle [ ] max. outreach [m] 7,2 7,2 operating pressure [bar] max. pump capacity [l/min] 2x60 2x60 dead weight [kg] E65Z72 / E75Z

E90Z / E110Z / E120Z 81 GZL 79 96 74 GN ATTENTION : use of GN reduces max.

E120Z81 E90Z96 / E110Z96 / E120Z96 crane type E90Z E110Z E120Z boom system 81

99 102 110 111 107 111 slewing torque net [knm] 24 27 28 slewing angle [ ] 425

outreach [m] 8,1 7,9 9,6 7,4 8,1 7,9 9,6 7,4 8,1 7,9 9,6 7,4 operating

8 E90Z / E110Z / E120Z 81 GZL GN ATTENTION : use of GN reduces max. outreach by 250mm and lifting capacity by 5% E90Z81 / E110Z81 E120Z81 E90Z96 / E110Z96 / E120Z96 crane type E90Z E110Z E120Z boom system lifting moment net [knm] slewing torque net [knm] slewing angle [ ] max. outreach [m] 8,1 7,9 9,6 7,4 8,1 7,9 9,6 7,4 8,1 7,9 9,6 7,4 operating pressure [bar] max. pump capacity [l/min] 2x x x60-70 dead weight [kg]

81 E140Z / E165Z GZL 79 95 81 GN ATTENTION : use of GN

outreach by 250mm and lifting capacity by 5% 79 E140Z81 /

95 lifting moment net [knm] 137 139 134 156 156 153 slewing

outreach [m] 8,1 7,9 9,5 8,1 7,9 9,5 operating pressure

9 81 E140Z / E165Z GZL GN ATTENTION : use of GN reduces max. outreach by 250mm and lifting capacity by 5% 79 E140Z81 / E165Z81 crane type E140Z E165Z boom system lifting moment net [knm] slewing torque net [knm] slewing angle [ ] max. outreach [m] 8,1 7,9 9,5 8,1 7,9 9,5 operating pressure [bar] max. pump capacity [l/min] 2x80 2x80 dead weight [kg] E140Z95 / E165Z

Equipment Standard equipment Double circuit (2K) E65L E75L E90L E110L E140L E160L E190LS E250L E260L E65Z E75Z E90Z E110Z E120Z E140Z E165Z E250Z Seite Top seat mounted behind crane column, seat

10 Equipment Standard equipment Double circuit (2K) E65L E75L E90L E110L E140L E160L E190LS E250L E260L E65Z E75Z E90Z E110Z E120Z E140Z E165Z E250Z Seite Top seat mounted behind crane column, seat adjustable in distance, access from both sides 22 Control 2 joysticks, 2 pedals (KH) 22 Integrated stabilizer beam, hydraulically extendable outriggers - Hydraulic stabilization control, 3 sections from top seat Stabilizers automatically tiltable up to 45 (SRX47, E250Z upon request) Main cylinder protection 24 Outer boom cylinder protection Spot lights, completely wired 23 KTL priming, powder coating RAL CE equipment: emergency stop, throttle check valve on lifting cylinder, outer boom ram and telescopic cylinder 1) 23 Special equipment N short crane column GN inclined crane column (only in combination with HLL, HLR, HKL, HKR or RCE) GZL crane base in inverted position K single circuit operation for standard top seat 23 1KHL single circuit operation for top seat HLL or HLR - - 4L 4 linear levers, 2 pedals for standard top seat 22 5L 5 linear levers, 1 pedal for standard top seat 22 CP comfort package 23 CPD comfort package Germany 23 RAL special colour RAL 25 TOÜ dead point over stabilizer beam 24 TOG dead point opposite stabilizer beam 24 HVL/HVR top seat with adjusting chocks HVL alignment left HVR alignment right HLL/HLR lateral top seat with linear levers HLL left mounted HLR right mounted HKL/HKR lateral top seat with joysticks/pedals HKL left mounted HKR right mounted LT ladder for lateral top seat, mounted behind crane column AS90 stabilizers automatically tiltable up to E250Z AS180 stabilizers hydraulically tiltable up to TV 180 mm extended stabilizer plate RX47 outriggers, max. 4,7 m SRX47 stabilizer bridge without control valve, RAL FD250 flap down stabilization without control valve, RAL D4 stabilizer valve PVG32 4 sections with electrical control (loose) DM4 stabilizer valve PVG32 4 sections with priority valve and electrical control, mounted DM7 stabilizer valve PVG32 7 sections with priority valve and electrical control, mounted FHS main cylinder and slewing system operated at ground level FAS stabilization 3 sections operated at ground level F5 FHS + FAS S 1 free section on top seat AX2 separately hydraulically extendable outriggers (only with RX47 and 1S / RCE) LO LHV + OSM 23 RCE radio remote control Hetronic with Danfoss PVG32 control versions: 6 x X 3 x XY 2 x XYZ GZL CA cabin with IQAN control and L90LS control valve DH AC KC LM KP/VP constant pump/variable pump for RCE and CA KP VP C5 Code 5, extra hose for weighing system SD damper units Hultdins for standard top seat, mounted for slewing and lifting cylinder - 24 GA grab saw equipment (not in combination with 1K) crane type 95 lifting moment net [knm] 210 slewing torque net [knm] 36 slewing angle [ ] 395 max. outreach [m] 9,5 operating pressure [bar] 260 max. pump capacity [l/min] 2x90 dead weight [kg] 2980 KFS operator protection, mounted 23 KM fixed heel GLC bracket for Hultdins grab (GLC40, GLC50) VA short stabilizer legs SK quick release couplings 25 HPLS increased lifiting capacity with electrical control 24 SBP protection covers for stabilizer legs and control valves on standard top seat 25 SLP substitute hose package for standard top seat - - 1) applies only for timber cranes, in case of scrap and recycling application LO is necessary 18 standard equipment special equipment - not available 19

Equipment Equipment Crane base Single telescopic extension robust cast

adjustable, large-scale guide blocks (on E65L, E75L, E65Z and E75Z pipes

round racks, end stroke suppression on all slewing cylinders (on E65L,

self-aligning roller bearings optimal protection due to inlaid protected

system Double telescopic extension carrying force with linkage system

Z-cranes inlaid protected pipes in the outer boom and laterally

main boom on E90Z, E110Z, E120Z, E140Z, E165Z, E250Z, E260L - more

boom speed throughout the total working area linkage system between main

operation speed - 176 working angle without dead point double telescopic

drive - optimal guidance of telescopic arms due to long boom overlap

11 Equipment Equipment Crane base Single telescopic extension robust cast crane column inlaid protected pipes in the outer boom and laterally adjustable, large-scale guide blocks (on E65L, E75L, E65Z and E75Z pipes outside) low mounted double rack slewing system in oil bath, two solid round racks, end stroke suppression on all slewing cylinders (on E65L, E75L, E65Z und E75Z single rack slewing system) high-quality self-aligning roller bearings optimal protection due to inlaid protected hoses exterior hoses available (except on E65L, E75L, E65Z, E75Z) Linkage system Double telescopic extension carrying force with linkage system carrying force without linkage system advantage of linkage system on Z-cranes inlaid protected pipes in the outer boom and laterally adjustable, large-scale guide blocks linkage system between column and main boom on E90Z, E110Z, E120Z, E140Z, E165Z, E250Z, E260L - more lifting power of up to 60 % in the upper working area - constant main boom speed throughout the total working area linkage system between main boom and outer boom on E190LS, E250L, E260L - constant power and operation speed working angle without dead point double telescopic extension with inlaid protected hoses - high speeds by means of chain drive - optimal guidance of telescopic arms due to long boom overlap maintenance-free hose and chain rollers with ball bearings 20 standard equipment special equipment standard equipment special equipment 21

B Equipment Equipment Top seat Lateral top seat with linear levers

hydraulic control of stabilization from top seat (for E65L, E75L,

E165Z) 4L 4 linear levers and 2 pedals 5L 5 linear levers and 1 pedal

stabilization, single and double circuit available, without ladder

HLR (all models except E190LS, E250L, E260L, E250Z) HVL, HVR top seat

VOAC-valves standard top seat with double circuit, directly pivoted

Lateral top seat with joystick controls D4 stabilizer valve PVG32 4

sections with priority valve and electrical control, mounted DM7

control, mounted 1K single circuit hydraulic with parallel connection

circuit hydraulic with lock-out switch (for E190LS, E250L, E250Z,

(not in combination with HKR, HKL,HLR, HLL, HVL, HVR) 1120 760 1120.

..2030 830 180 880 480 slewing radius of E90L, E110L, E140L, E160L

from factory, different height upon request spot lights consisting of

from top seat CE-equipment CP comfort package consisting of: - engine

package like CP but with inclination monitoring and main boom

..2030 830 180 820 550 HKR / HKL lateral top seat on the right / left

seat, single or double circuit available LT ladder for HKR / HKL

1850mm from factory, different height upon request Timber application

throttle check valve for lifting cylinder, outer boom ram and

12 B Equipment Equipment Top seat Lateral top seat with linear levers HVL HVR hydraulic control of stabilization from top seat (for E65L, E75L, E90L, E110L, E140L, E160L, E65Z, E75Z, E90Z, E110Z, E120Z, E140Z, E165Z) 4L 4 linear levers and 2 pedals 5L 5 linear levers and 1 pedal HLL, HLR lateral top seat on left or right side, 9 linear levers incl. stabilization, single and double circuit available, without ladder (all models except E190LS, E250L, E260L, E250Z) slewing angles of HLL, HLR (all models except E190LS, E250L, E260L, E250Z) HVL, HVR top seat with adjustable chocks, alignment left or right high-quality VOAC-valves standard top seat with double circuit, directly pivoted control with 2 joysticks and 2 pedals, adjustable seat with armrests Lateral top seat with joystick controls D4 stabilizer valve PVG32 4 sections with electrical control (loose) DM4 stabilizer valve PVG32 4 sections with priority valve and electrical control, mounted DM7 stabilizer valve PVG32 7 sections with priority valve and electrical control, mounted 1K single circuit hydraulic with parallel connection (all models except E190LS, E250L, E260L, E250Z) Electronics 1K single circuit hydraulic with lock-out switch (for E190LS, E250L, E250Z, E260L) 1S 1 extra section on top seat KFS operator protection mounted (not in combination with HKR, HKL,HLR, HLL, HVL, HVR) slewing radius of E90L, E110L, E140L, E160L slewing radius of E90Z, E110Z, E120Z, E140Z, E165Z, mounted on 1850mm from factory, different height upon request spot lights consisting of 4 spot lights (2 on top seat, 2 on outer boom) and electric control from top seat CE-equipment CP comfort package consisting of: - engine RPM - engine start/stop - spot lights from truck cabin CPD comfort package like CP but with inclination monitoring and main boom monitoring HKR / HKL lateral top seat on the right / left side (2 joysticks, 2 pedals) stabilization hydraulically from top seat, single or double circuit available LT ladder for HKR / HKL slewing radius GN of E90Z, E110Z, E120Z, E140Z, E165Z, mounted on 1850mm from factory, different height upon request Timber application manometer as optical overload protection emergency stop function throttle check valve for lifting cylinder, outer boom ram and telescopic cylinder Scrap and recycling LO load holding valve and overload protection manometer as optical overload monitoring emergency stop function 22 standard equipment special equipment standard equipment special equipment 23

13 Equipment Equipment Stabilization Radio remote control stabilizers automatically tiltable up to 45 AS90 stabilizers automatically tiltable up to 90 AS180 stabilizers hydraulically tiltable up to 180 AX2 separately hydraulically extendable outriggers (only in combination with RX47 and 1S or RCE) SBP protection covers for stabilizer legs and control valves on standard top seat Dead point TOG TOG TOÜ GZR TOÜ GZL TOÜ TOÜ TOG GZR TOG GZL E65L, E75L, E90L, E110L, E140L, E160L E190LS, E250L, E260L E90Z, E110Z, E120Z, E140Z, E165Z, E250Z E65Z, E75Z, E90Z, E110Z, E120Z, E140Z, E165Z, E250Z RCE radio remote control with 10 sections Danfoss PVG 32 4 on/off sections stabilization, transmitter Hetronic ( 6 x X, 3 x XY, 2 x XYZ) only in combination with AX2, RX47 and LO SCR / SCL stand up control with linear levers and invisible operator s protection (upon request) SK quick release couplings Other equipment Coating main cylinder protection ground level control FHS main boom + slewing FAS stabilization 3 sections F5 FHS + FAS KM fixed heel for E140Z, E165Z, E250Z KM fixed heel for E190LS, E250L KTL-coating with burn-in process at 160 C powder coating with burn-in process at 200 C quality in every RAL colour Service-friendly GA grab saw equipment with pedal control and exterior hoses (only in double circuit for E90L, E110L, E140L, E160L, E90Z, E110Z, E120Z, E140Z, E165Z) SD damper units for main and slewing cylinder HPLS increased lifting capacity with electrical control easy change of inlaid, protected hoses dismounting of telescopic cylinder without dismantling of extension boom dismounting of outrigger cylinder without dismantling of outrigger 24 standard equipment special equipment standard equipment special equipment 25

Equipment Equipment Cabin CA Standard Equipment Cabin Interior electric

operated RDS radio with CD player 2 loudspeakers, indoor lighting MDM-display

possible hose set between crane base and column due to two separate control

safety glass with protection cover) low weight construction all parts

fan seat heating damper units (Hultdins) comfortable seat with headrest, sash

dimension of crane operation indicator main boom control water container for

ventilator switch emergency stop (engine) interval switch wiper indoor lighting

truck indicator oil level truck LM display joystick with 3 prop.

diesel heater engine start/stop RPM + fuses A comfortable new crane future

14 Equipment Equipment Cabin CA Standard Equipment Cabin Interior electric hydraulic control with VOAC L90LS and IQAN, all 11 functions proportionally operated RDS radio with CD player 2 loudspeakers, indoor lighting MDM-display offers individual setting options and display of service inspections smallest possible hose set between crane base and column due to two separate control valves liftable cabin front and side door (front window made of 8 mm Lexan safety glass with protection cover) low weight construction all parts KTL-undercoated and powder coated water heating with thermostat and three-stage fan seat heating damper units (Hultdins) comfortable seat with headrest, sash window on both sides, all control functions integrated in the arm rests A new dimension of crane operation indicator main boom control water container for washer service friendly due to foldable seat console MDM display 3-stage ventilator switch emergency stop (engine) interval switch wiper indoor lighting seat heating warning lamp air conditioning fuses indicator water temperature truck indicator oil level truck LM display joystick with 3 prop. functions spot lights cabin and crane joystick ON/OFF change-over switch DH diesel heater engine start/stop RPM + fuses A comfortable new crane future windscreen wiper windscreen washer F F A B A...6 crane functions B... 3 stabilizer functions, cabin lift, 1 free section 26 standard equipment special equipment 27

Equipment Timber Grabs, Accessories Cabin Exterior Timber Grabs FG36 - for

FG41, FG56 - for short timber cranes compact hose set due to 2 separate

column with protected electrical box 5 spot lights (3 x cabin, 2 x outer

forest machines - for heavy forest tractors - for long timber cranes

application - for static cranes DH diesel heater with 3-stage ventilator

510 530 560 b 850 950 950 1050 1050 1150 c 510 600 600 640 640 680 d 340

860 1000 1000 1040 1040 1170 h 1470 1880 1880 1980 1980 2010 i 90 120 120

2410 3510 Type FG36 FG41 FG41S FG56 FG56S FG56X gripping area [m 2 ] 0,36

15 16 dead weight [kg] 175 215 250 225 260 340 E140L E160L E90Z E110Z

2390 3490 1490 1430 1000 1270 670 2460 3560 320 kg additional weight

15 Equipment Timber Grabs, Accessories Cabin Exterior Timber Grabs FG36 - for forest machines - for forest tractors - for small short timber cranes FG41, FG56 - for short timber cranes compact hose set due to 2 separate control valves on crane base and column 6 section control valve on crane column with protected electrical box 5 spot lights (3 x cabin, 2 x outer boom), comfortable protection cover warning lamp FG41S, FG56S - for heavy forest machines - for heavy forest tractors - for long timber cranes Special Equipment Cabin FG56X - for long timber cranes in heavy application - for static cranes DH diesel heater with 3-stage ventilator AC air conditioning KC cable remote control for all functions ON/OFF LM Loadmaster 2000, weighing device incl. pedal, completely installed FG36 FG41 FG41S FG56 FG56S FG56X a b c d e f g h i Technical data E90L E110L A B C D E F G Type FG36 FG41 FG41S FG56 FG56S FG56X gripping area [m 2 ] 0,36 0,4 0,4 0,5 0,5 0,5 load capacity [kg] max. operat. pressure [MPa] gripping force (20MPa) [kn] dead weight [kg] E140L E160L E90Z E110Z E120Z E140Z E165Z kg additional weight compared with standard equipment Accessories rotators knuckle sets oil tanks oil coolers mounting accessories etc. E90L, E110L E140L, E160L E90Z, E110Z, E120Z E140Z, E165Z GZL 28 standard equipment special equipment 29

16 Variety + Comfort + Quality = Customer satisfaction with EPSILON E380L base for static mounting X mm, different height upon request 30 crane type E380L boom system lifting moment net [knm] slewing torque net [knm] 50 slewing angle [ ] endless max. outreach [m] 9,1 15,3 operating pressure [bar] 270 max. pump capacity [l/min] 2x100 1x140 dead weight [kg] dead weight (with top seat) [kg]

Quality for the future 3-D construction of all components with the latest CAD-system FEM-calculation for robust

workshop in Elsbethen near Salzburg more than 2500 EPSILON timber and scrap cranes and STEPA farm, mobile and tractor

Just in time production in a state-of-the-art workshop EPSILON Kran GmbH Christophorusstraße 30 A-5061 Elsbethen Tel.

com www.epsilonkran.com PR004_GB Issue 05/05 This brochure is meant for international use.

EPSILON reserves the right to change design or technical specification at any time without prior notice.

17 Quality for the future 3-D construction of all components with the latest CAD-system FEM-calculation for robust construction with optimal weight Endurance test on modern test benches by full capacity utilization In the new workshop in Elsbethen near Salzburg more than 2500 EPSILON timber and scrap cranes and STEPA farm, mobile and tractor cranes are produced. Just in time production in a state-of-the-art workshop EPSILON Kran GmbH Christophorusstraße 30 A-5061 Elsbethen Tel.: +43(0)662/ Fax: +43(0)662/ office@epsilonkran.com PR004_GB Issue 05/05 This brochure is meant for international use. The availability of some models and the model and special equipment may vary from country to country. EPSILON reserves the right to change design or technical specification at any time without prior notice. Any changes would not be applied retrospectively to previously sold units. Information, description and illustrations are correct at time of going to print, but may also be changed without prior notice. Illustrations may show certain country specific executions and special equipment, and therefore may not be complete standard execution.

EPSILON TIMBER CRANES OFFROAD

EPSILON TIMBER CRANES OFFROAD EPSCOPE EPSLINK EPSLIGHT TYPE DESIGNATION S 110 F 8 Outreach [dm] F Forwarder cranes R Skidder cranes H Harvester cranes Lifting moment [knm] Class (series) C compact M medium