Actuator LA43. Data sheet LINAK.COM/MEDLINE-CARELINE

Size: px
Start display at page:

Download "Actuator LA43. Data sheet LINAK.COM/MEDLINE-CARELINE"

Transcription

1 Actuator LA43 Data sheet LINAK.COM/MEDLINE-CARELINE

2 LA43 The LA43 is available in a powerful 8,000 N version, ensuring safe patient handling. With the LA43 actuator, LINAK offers a product which with its wide range of safety options, low noise level, and outstanding performance is the right choice for medical applications such as patient lifts, beds, dental chairs etc. Heavy-duty actuator Safety options such as: - Manual lowering: makes it possible to turn the inner tube down by hand, in case of emergency, or if electrical power is not available. - Spline: potential work injuries are prevented by the spline, as the actuator can only push and not pull, in case something touches e.g. the lifting boom on a patient lift. - High side load capacity for high safety: Side load of up to 1000 N is possible without breaking or damaging the actuator. - Safety nut: to ensure safe patient handling even when the actuator is no longer new. Unique and improved brake to prevent no unintended movement. High speed at full load. Features & Options Load in push: 8,000 N Housing colour: Light grey RAL7035 Protection class: IPX4, IPX6 (not manual lowering) Motor: 24 V DC Stroke length: mm (in steps of 5 mm) Positioning options: Dual Hall, digital or encoded Noise level: 50 db (A) according to DS/EN ISO Safety nut option: Yes, in push Nut: Guided (not guided nut with manual lowering) Safety option pull plate: 4000N static load with safety factor 2 Spline options: Electrical Built-in electrical limit switch: Power switch or signal switch Built-in end stop: Mechanical Exchangeable cable: Yes, minifit to minifit Safety factor: > 2.5 (for patient lifts: > 1.5) Manual lowering: Optional in red or grey, not IPX6 Usage Duty cycle: 10%, 2 minutes continuous use followed by 18 minutes not in use Usage temperature: 5ºC to 40ºC Storage temperature: - 10ºC to +50ºC Compatibility: CBJ1/2, CBJ-Home, CBJ-Care, CB6S, CB16, CB20 Approvals: IEC LINAK.COM/MEDLINE-CARELINE

3 Technical specifications LA43 with normal motor: Power supply Spindle pitch (mm) Thrust max. Push (N) Motor type Typical speed at 0/full load (mm/sec.) Typical current at full load (Amp) 24 V DC 4 8,000 Normal 5.8 / V DC 4 8,000 Normal 8.0 / V DC 3 8,000 Normal 4.2 / V DC 3 8,000 Normal 5.7 / Please note the above measurements are typical values. Ordering of LA43, 8000 N: Describe your needs for LA43: Stroke lengths ( mm with power switch in steps of 5 mm, mm with signal switch in steps of 5 mm) Installation dimensions IPX4, IPX6 Which control box is needed / perhaps as IC Is there a need for manual lowering? Grey or red? With/without bushes Dual hall for positioning? Back fixture standard or turned - see drawing Piston rod eye, with slot or solid? With/without bushes Is it for a patient hoist (Sf = 1.5) or other applications (Sf = 2.5) Contact your nearest LINAK subsidiary or dealer and place your order here.

4 LA43 Ordering example: A B D = Not specified End stop: 0 = Power switch 1 = Signal switch 2 = Encoded 3 = For CB9 CARELINE only Safety Factor: 1 = = 2.5 Cable: Plug Type: Fire Category: Install. Dim.: 0 = None D = Mini-fit 2 = V2 XXXX = mm Standard load 8 kn: S mm (S 250 mm - Manual lowering not allowed) (Standard load 8 kn: S mm (250 mm < S 400 mm - Manual lowering not allowed)) Standard load 8 kn: S mm (S 250 mm - With manual lowering) Standard load 8 kn: S mm (250 mm < S 400 mm - With manual lowering) Brake: 0 = None 1 = Brake PUSH Option / Position: 0 = None* J = Manuel Lowering, not IPX6 *) Piston Rod Eye: Back fixture: Colour: IP: Motor Type: 1 = With slot 2 = Solid X = Special 1 = 0 degrees 2 = 90 degrees 2 = Grey RAL = IPx4 6 = IPx6 B = 24 V DC Normal Feedback option: 0 = None Platform: Feedback: Safety: 0 = None (P0) 0 = None H = Dual Hall, digital M = Dual Hall, encoded A = Safety nut N = Safety nut + Pull plate L = EL.splines + Safety nut X = Special Stroke Length: XXX = mm Min 100 mm (in steps of 5 mm) Max 400 mm (in steps of 5 mm) Spindle Pitch: Actuator Type: 030 = 3 mm 040 = 4 mm 43 = LA43 *) LA43 Hi-Lo and LA43 PL are not available for sale to new projects. We recommend to use LA40 HP and LA40 PL.

5 Installation dimension Installation dimension S Installation dimensions 3 mm pitch (8,000 N) Inner tube with or without slot Solid piston rod with or without slot (Use with IPX6 washable - launch pending) Stroke length 250 mm S S Safety nut in push is standard: no addition to installation dimension Manual lowering is not allowed Installation dimension S or S Installation dimensions 4 mm pitch (8,000 N) Inner tube with or without slot With manual lowering Stroke length 250 mm S S Safety nut in push is standard: no addition to installation dimension Manual lowering: Slot is not possible with manual lowwering Installation dimension S or S +294 Stroke length, only power switch 250 mm < S 400 mm Inner tube with or without slot Safety nut in push is standard: no addition to installation dimension Manual lowering: Slot is not possible with manual lowering Installation dimensions 4 mm pitch (8,000 N) Solid piston rod with or without slot (Use with IPX6 washable) With manual lowering S +195 S S + 294

6 Dimensions: LA43 Standard Piston rod eyes: Drawing no.: N.B. Tolerance information ± 2 mm - Installation dimension ± 2 mm - Stroke length

7 Dimensions: LA43 with manual lowering Piston rod eyes: Drawing no.: N.B. Tolerance information ± 2 mm - Installation dimension ± 2 mm - Stroke length

8 Back fixtures: Copyright LINAK MA M G. Chapter 5.18 Terms of use The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing accurate and up-to-date information on its products. However, due to continuous development in order to improve its products, LINAK products are subject to frequent modifications and changes without prior notice. Therefore, LINAK cannot guarantee the correct and actual status of said information on its products. While LINAK uses its best efforts to fulfil orders, LINAK cannot, for the same reasons as mentioned above, guarantee the availability of any particular product. Therefore, LINAK reserves the right to discontinue the sale of any product displayed on its website or listed in its catalogues or other written material drawn up by LINAK. All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof, please contact LINAK. FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER MANUAL

Actuator LA44. Data sheet LINAK.COM/MEDLINE-CARELINE

Actuator LA44. Data sheet LINAK.COM/MEDLINE-CARELINE Actuator LA44 Data sheet LINAK.COM/MEDLINE-CARELINE LA44 The LA44 is available in powerful 10,000 N and 12,000 N versions, ensuring safe patient handling. With the LA44 actuator, LINAK offers a product,

More information

Actuator LA40. Data sheet LINAK.COM/MEDLINE-CARELINE

Actuator LA40. Data sheet LINAK.COM/MEDLINE-CARELINE Actuator LA40 Data sheet LINAK.COM/MEDLINE-CARELINE LA40 The LA40 is a low noise and powerful actuator which is available in a 1500N, 4000N, 6000N and an 8000N version. With the LA40, LINAK offers a new

More information

Actuator LA32. Data sheet LINAK.COM/TECHLINE LINAK.COM/MEDLINE-CARELINE

Actuator LA32. Data sheet LINAK.COM/TECHLINE LINAK.COM/MEDLINE-CARELINE Actuator LA32 Data sheet LINAK.COM/TECHLINE LINAK.COM/MEDLINE-CARELINE LA32 The LA32 is a powerful actuator that can be supplied with a ball screw spindle to give outstanding performance. The ideal choice

More information

Actuator LA40. Data sheet LINAK.COM/MEDLINE-CARELINE

Actuator LA40. Data sheet LINAK.COM/MEDLINE-CARELINE Actuator LA40 Data sheet LINAK.COM/MEDLINE-CARELINE LA40 The LA40 is a low noise and powerful actuator which is available in a 1500N, 4000N, 6000N and an 8000N version. With the LA40, LINAK offers a new

More information

Actuator LA23. Data sheet LINAK.COM/MEDLINE-CARELINE

Actuator LA23. Data sheet LINAK.COM/MEDLINE-CARELINE Actuator LA23 Data sheet LINAK.COM/MEDLINE-CARELINE LA23 The LA23 actuator is a small and strong push/pull actuator (up to 2500 N). The LA23 can be used in various applications where size is important.

More information

Actuator LA23 DESKLINE. Data sheet LINAK.COM/DESKLINE

Actuator LA23 DESKLINE. Data sheet LINAK.COM/DESKLINE Actuator LA23 DESKLINE Data sheet LINAK.COM/DESKLINE LA23 DESKLINE The LA23 is a small and strong push actuator (up to 2500 N). The LA23 can be used in various applications where size is important. The

More information

Actuator LA31. Data sheet LINAK.COM/MEDLINE-CARELINE

Actuator LA31. Data sheet LINAK.COM/MEDLINE-CARELINE Actuator LA31 Data sheet LINAK.COM/MEDLINE-CARELINE LA31 The LA31 is a compact, quiet and powerful actuator designed for a variety of applications in the MEDLINE & CARELINE segment, such as hospital beds,

More information

Actuator LA34. Data sheet LINAK.COM/MEDLINE-CARELINE

Actuator LA34. Data sheet LINAK.COM/MEDLINE-CARELINE Actuator LA34 Data sheet LINAK.COM/MEDLINE-CARELINE LA34 LA34 is a technological state-of-the-art actuator that, due to its innovative construction can push up to 1, N at a speed of 5 mm/sec. and with

More information

Actuator LA27. Data sheet LINAK.COM/MEDLINE-CARELINE

Actuator LA27. Data sheet LINAK.COM/MEDLINE-CARELINE Actuator LA7 Data sheet LINAK.COM/MEDLINECARELINE LA7 The LA7 actuator is a powerful actuator designed for a variety of medical applications. It is developed for both push and pull applications and has

More information

ACTUATOR LA44 PRODUCT DATA SHEET

ACTUATOR LA44 PRODUCT DATA SHEET PRODUCT DATA SHEET ACTUATOR LA Features: Max. thrust N (constructed for push only) Sideways load up to N is possible without breaking or damaging the actuator (with full load and full stroke, N / mm stroke)

More information

ACTUATOR LA28 PRODUCT DATA SHEET

ACTUATOR LA28 PRODUCT DATA SHEET PRODUCT DATA SHEET ACTUATOR LA28 Features and options: Thrust up to 3N (with strong motor). Protection class IP1 2.3 m straight cable with 6.3 mm jack-plug, (for actuators with reed-switch 2.3 m straight

More information

Actuator LA30. Data sheet LINAK.COM/TECHLINE LINAK.COM/MEDLINE-CARELINE

Actuator LA30. Data sheet LINAK.COM/TECHLINE LINAK.COM/MEDLINE-CARELINE Actuator LA30 Data sheet LINAK.COM/TECHLINE LINAK.COM/MEDLINE-CARELINE LA30 LA30 is a powerful actuator yet small enough to fit most applications. The actuator can be supplied with options such as built-in

More information

Actuator LA27 HOMELINE Analogue. Data sheet LINAK.COM/HOMELINE

Actuator LA27 HOMELINE Analogue. Data sheet LINAK.COM/HOMELINE Actuator LA27 HOMELINE Analogue Data sheet LINAK.COM/HOMELINE LA27 Analogue The LA27 HOMELINE linear actuator is a powerful product designed especially for comfort furniture applications like leisure beds

More information

ACTUATOR LA31 PRODUCT DATA SHEET

ACTUATOR LA31 PRODUCT DATA SHEET PRODUCT DATA SHEET ACTUATOR LA31 Features: 12/24 V DC permanent magnet motor Thrust up to 6 N in push and up to 4 N in pull Electric chromated steel piston rod eye with slot High-strength plastic housing

More information

product data sheet Usage: Duty cycle: Max 10% or 2 minutes continuous use followed by 18 minutes not in use Ambient temperature: +5 to + 40 C

product data sheet Usage: Duty cycle: Max 10% or 2 minutes continuous use followed by 18 minutes not in use Ambient temperature: +5 to + 40 C product data sheet ACTUATOR LA31 Features: 24V DC permanent magnet motor Thrust up to 6000 N in push and up to 4000 N in pull Electric chromated steel piston rod eye with slot High-strength plastic housing

More information

Actuator LA29. Data sheet LINAK.COM/HOMELINE

Actuator LA29. Data sheet LINAK.COM/HOMELINE Actuator LA29 Data sheet LINAK.COM/HOMELINE LA29 The LA29 actuator is a HOMELINE actuator specially made for domestic applications. The actuator has a very short installation dimension as the distance

More information

Control Box CBJ1 / CBJ2. Data sheet LINAK.COM/MEDLINE-CARELINE

Control Box CBJ1 / CBJ2. Data sheet LINAK.COM/MEDLINE-CARELINE Control Box CBJ1 / CBJ2 Data sheet LINAK.COM/MEDLINE-CARELINE CBJ1 / CBJ2 The control boxes CBJ1 and CBJ2 are part of the battery driven JUMBO system. JUMBO is a modular system combining an actuator, a

More information

Battery Li-Ion BA21. Data sheet LINAK.COM/MEDLINE-CARELINE

Battery Li-Ion BA21. Data sheet LINAK.COM/MEDLINE-CARELINE Battery Li-Ion BA21 Data sheet LINAK.COM/MEDLINE-CARELINE BA21 Li-Ion The BA21 Li-Ion back-up battery pack has been specially developed for use with the new control boxes COxx and CAxx, e.g. CO61 and CA40,

More information

Control Box CB12. Data sheet LINAK.COM/MEDLINE-CARELINE

Control Box CB12. Data sheet LINAK.COM/MEDLINE-CARELINE Control Box CB12 Data sheet LINAK.COM/MEDLINE-CARELINE CB12 The CB12 product range features two standard versions, which are ideal for a vast number of medical and industrial applications. In general the

More information

LIFTING COLUMN LC2 PRODUCT DATA SHEET

LIFTING COLUMN LC2 PRODUCT DATA SHEET PRODUCT DATA SHEET LIFTING COLUMN LC2 Features LC2 is a specially designed telescopic aluminum lifting column incorporating a LINAK 24 V or 12V DC linear actuator (LC28C or LC30) equipped with a safety

More information

ACTUATOR LA31 PRODUCT DATA SHEET

ACTUATOR LA31 PRODUCT DATA SHEET PRODUCT DATA SHEET ACTUATOR LA31 Features: 24V DC permanent magnet motor Thrust up to 6000 N in push and up to 4000 N in pull Electric chromated steel piston rod eye with slot High-strength plastic housing

More information

DESKLIFT TM DL6. Data sheet LINAK.COM/DESKLINE

DESKLIFT TM DL6. Data sheet LINAK.COM/DESKLINE DESKLIFT TM DL6 Data sheet LINAK.COM/DESKLINE DESKLIFT TM DL6 The DESKLIFT TM DL6 is a compact 3-part lifting column, which is a perfect choice for a wide range of different desk applications ranging from

More information

Kick & Click TM. Data sheet LINAK.COM/DESKLINE

Kick & Click TM. Data sheet LINAK.COM/DESKLINE Kick & Click TM Data sheet LINAK.COM/DESKLINE Kick & Click TM The Kick & Click TM system is the smart and intuitive solution for mounting DESKLIFT TM columns to the tabletop. The solution is perfect for

More information

Actuator LA35. Data sheet LINAK.COM/TECHLINE

Actuator LA35. Data sheet LINAK.COM/TECHLINE Actuator LA35 Data sheet LINAK.COM/TECHLINE LA35 The LA35 is a very quiet and powerful actuator, and provides a practical and cost-effective solution with low power consumption. The actuator is designed

More information

Kick & Click TM. Data sheet LINAK.COM/DESKLINE

Kick & Click TM. Data sheet LINAK.COM/DESKLINE Kick & Click TM Data sheet LINAK.COM/DESKLINE Kick & Click TM LINAK introduces a smart and intuitive mounting solution for mounting DESKLIFT TM columns to the tabletop. The solution is perfect for various

More information

Actuator systems for hospital beds Perfection in movement LINAK.COM/MEDLINE-CARELINE

Actuator systems for hospital beds Perfection in movement LINAK.COM/MEDLINE-CARELINE Actuator systems for hospital beds Perfection in movement LINAK.COM/MEDLINE-CARELINE 2 Meet the healthcare challenges of tomorrow LINAK provides actuator systems ranging from adjustment of bed height and

More information

ACTUATOR LA30 PRODUCT DATA SHEET

ACTUATOR LA30 PRODUCT DATA SHEET PRODUCT DATA SHEET ACTUATOR LA3 Features: 12/24V DC permanent magnet motor Max. thrust up to 6 N (LA3LK) Stainless steel piston rod Elegant and compact construction with small installation dimensions Protection

More information

ACTUATOR LA30 WE IMPROVE YOUR LIFE. LA30 : 12/24V DC. Max. thrust 3500 N LA30L : 24V DC. Max. thrust 6000 N (LA30LK)

ACTUATOR LA30 WE IMPROVE YOUR LIFE. LA30 : 12/24V DC. Max. thrust 3500 N LA30L : 24V DC. Max. thrust 6000 N (LA30LK) ACTUATOR LA3 LA3 : 12/24V DC. Max. thrust 35 N LA3L : 24V DC. Max. thrust 6 N (LA3LK) Features: 12/24V DC permanent magnet motor Max. thrust up to 6 N (LA3LK) Stainless steel piston rod Duty cycle: Max.

More information

Actuator systems for patient lifts

Actuator systems for patient lifts Actuator systems for patient lifts Safe patient handling and proper ergonomics LINAK.COM/MEDLINE-CARELINE 2 The future of patient lifts rests upon stronger actuator systems Modern patient lifts need to

More information

LIFTING COLUMN BL3 PRODUCT DATA SHEET

LIFTING COLUMN BL3 PRODUCT DATA SHEET PRODUCT DATA SHEET LIFTING COLUMN BL3 Features: 24 V DC permanent magnetic motor Max. thrust 16 N (push applications only) Single or parallel drive Install. dimension 35 mm (+5/-3) + stroke 4 mm (+/-6)

More information

Focus on marine LINAK.COM/TECHLINE

Focus on marine LINAK.COM/TECHLINE Focus on marine LINAK.COM/TECHLINE Understanding your needs From small motor boats over sailboats to luxury yachts, regardless of the type of your boat, LINAK can help you with all kinds of movements by

More information

MOVE ON GO ELECTRIC! A Comparison of motion control systems: - Hydraulic - Electric

MOVE ON GO ELECTRIC! A Comparison of motion control systems: - Hydraulic - Electric www.linak.com/techline MOVE ON GO ELECTRIC! A Comparison of motion control systems: - Hydraulic - Electric Go electric - Why? Hydraulic system - Complex system of oil tanks, pumps, filters and hoses -

More information

ACTUATOR LA30 PRODUCT DATA SHEET

ACTUATOR LA30 PRODUCT DATA SHEET PRODUCT DATA SHEET ACTUATOR LA3 Features: 12/24V DC permanent magnet motor Max. thrust up to 6 N (LA3LK) Stainless steel piston rod Duty cycle: Max. 1% or 6 min/hour at continuous use Ambient temperature

More information

Actuator LD3. Product Data Sheet Feature

Actuator LD3. Product Data Sheet   Feature Product Data Sheet www.moteck.com Actuator LD LD features its compact design, which is suitable for various applications that require limited installation space, such as window opener and adjustable car

More information

TA1. series. Comfort Motion Care Motion Auto Motion Ergo Motion. Product Segments

TA1. series. Comfort Motion Care Motion Auto Motion Ergo Motion. Product Segments Product Segments Comfort Motion Care Motion Auto Motion Ergo Motion The TA1 linear actuator is TiMOTION s flagship model suited for healthcare, furniture, ergonomic and industrial applications. Industry

More information

Focus on Ventilation and Farming Solutions LINAK.COM/TECHLINE

Focus on Ventilation and Farming Solutions LINAK.COM/TECHLINE Focus on Ventilation and Farming Solutions LINAK.COM/TECHLINE Understanding your needs For many years, LINAK has been a sub-supplier to several ventilation equipment manufacturers and stable designers

More information

LIFTING COLUMN LC2 PRODUCT DATA SHEET

LIFTING COLUMN LC2 PRODUCT DATA SHEET PRODUCT DATA SHEET LIFTING COLUMN LC2 Features LC2 is a specially designed telescopic aluminum lifting column incorporating a LINAK 24 V or 12V DC linear actuator (LC28 or LC30) equipped with safety nut

More information

Focus on. Mining Equipment.

Focus on. Mining Equipment. Focus on Mining Equipment www.linak-us.com/techline Linear actuators vs. Hydraulics Customers demand Safe, Reliable and Cost effective operation, without the headaches of oil leaks, costly maintenance,

More information

Better Solutions - Better Care. Product Overview LINAK.COM/MEDLINE-CARELINE

Better Solutions - Better Care. Product Overview LINAK.COM/MEDLINE-CARELINE Better Solutions - Better Care Product Overview LINAK.COM/MEDLINE-CARELINE Ready to take on the healthcare challenge of tomorrow? With more people in need of care, but fewer hands to do the caring, there

More information

Actuator ID10. Product Data Sheet Feature

Actuator ID10. Product Data Sheet   Feature Product Data Sheet www.moteck.com Actuator ID1 ID1 features its heavy load capability and high speed design, which is suitable for various industrial applications requiring quick movement, such as agricultural

More information

Actuator LA14. Data sheet LINAK.COM/TECHLINE

Actuator LA14. Data sheet LINAK.COM/TECHLINE Actuator LA14 Data sheet LINAK.COM/TECHLINE LA14 The actuator LA14 is a very tough actuator with a high IP degree and aluminium housing, making it ideal for use in harsh and demanding environments. The

More information

* depending on drive configuration at constant 24/29 V DC without load

* depending on drive configuration at constant 24/29 V DC without load Page 1/8 - stand of 02/2016 Very powerful drive. Compact thanks to its horizontally turned guidance tube. Almost all special MEGAMAT 2 equipment can also be used with. This mix of power and diversity makes

More information

Actuator LA36. Data sheet LINAK.COM/TECHLINE

Actuator LA36. Data sheet LINAK.COM/TECHLINE Actuator LA36 Data sheet LINAK.COM/TECHLINE LA36 The actuator LA36 is one of the most solid and powerful LINAK actuators, designed to operate under extreme conditions. The LA36 is a maintenance-free product

More information

TECHLINE Solar Catalogue

TECHLINE Solar Catalogue TECHLINE Solar Catalogue Movement for Solar Power Tracking Systems Right now you are holding the solar product catalogue from LINAK, presenting an overview of our solar product range. Our purpose with

More information

Preface... 4 Valid for... 5 Important information... 6 Safety instructions... 6 Manufacturer s declaration... 8

Preface... 4 Valid for... 5 Important information... 6 Safety instructions... 6 Manufacturer s declaration... 8 Page 2 of 72 Contents Preface................................................................................... 4 Valid for..................................................................................

More information

LINEAR ACTUATOR INDUSTRIAL DUTY 10A SERIES

LINEAR ACTUATOR INDUSTRIAL DUTY 10A SERIES Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame and extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [153mm], 8 [203mm], 12 [305mm], 18 [457mm], 24 [610mm],

More information

DLA SERIES + ACCESSORIES

DLA SERIES + ACCESSORIES LINEAR ACTUATORS SERIES + ACCESSORIES 50 mm to 300 mm stroke 10 N series 50-300 mm 0-10 N 95 Ø40 9 Extracted - - Example: --5-A-50- Reduction 5 10 30 40 Voltage (VDC) / / / / / Max. thrust (N) 0 300 500

More information

E / HYDAC KineSys Electric cylinders (HEZ)

E / HYDAC KineSys Electric cylinders (HEZ) E 10.146.1.1/02.15 HYDAC KineSys Electric cylinders (HEZ) NOTE The information in this brochure relates to the operating conditions and applications described. For applications or operating conditions

More information

LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES

LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES Product Data Sheet Standard Features: All steel frame and extension tube o Aluminum gearbox housing o Ball screw version has stainless steel extension tube Nominal stroke lengths: 4 [102mm], 6 [152mm],

More information

LINEAR ACTUATOR INDUSTRIAL DUTY 10B SERIES

LINEAR ACTUATOR INDUSTRIAL DUTY 10B SERIES Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame with stainless steel extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [153mm], 8 [203mm], 12 [305mm],

More information

ELECTROMECHANICAL LINEAR ACTUATOR. Your First Choice In Motion Technology CMLA SERIES

ELECTROMECHANICAL LINEAR ACTUATOR. Your First Choice In Motion Technology CMLA SERIES ELECTROMECHANICAL LINEAR ACTUATOR P R O D U C T I N F O R M A T I O N CMLA SERIES Your First Choice In Motion Technology INTRODUCION CMLA CMLA is the newest addition to the Duff Norton Linear Actuator

More information

LuxSpace Accent the best energy-efficient range for retail applications

LuxSpace Accent the best energy-efficient range for retail applications Lighting LuxSpace Accent the best energy-efficient range for retail applications LuxSpace Accent Retailers are increasingly having to contend with rising energy prices. At the same time, they need to retain

More information

LINEAR ACTUATOR INDUSTRIAL DUTY 10A SERIES

LINEAR ACTUATOR INDUSTRIAL DUTY 10A SERIES Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame and extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [153mm], 8 [203mm], 12 [305mm], 18 [457mm], 24 [610mm],

More information

ACTUATORS POSITION SENSOR

ACTUATORS POSITION SENSOR POSITION SENSOR 1 2 SUMMARY P INTRODUCTION PAGE 4 P LTS POSITION SENSOR PAGE 5 P LTL POSITION SENSOR PAGE 9 SUMMARY P LTE POSITION SENSOR PAGE 12 3 INTRODUCTION INTRODUCTION Magnetic position sensors are

More information

MOTION TECHNOLOGIES PTY LIMITED

MOTION TECHNOLOGIES PTY LIMITED MOTION TECHNOLOGIES PTY LIMITED IJ2 SERIES INDUSTRIAL ACTUATOR STANDARD FEATURES * Economical * Quite operation * Up to 500kg static capacity * Self aligning rod end on acme screw versions * Weather resistant

More information

LINEAR ACTUATOR INDUSTRIAL DUTY 10A/B SERIES

LINEAR ACTUATOR INDUSTRIAL DUTY 10A/B SERIES Product Data Sheet Standard Features: All steel frame and extension tube o Aluminum gearbox housing o Ball screw version has stainless steel extension tube Nominal stroke lengths: 4 [102mm], 6 [153mm],

More information

LINEAR ACTUATOR INDUSTRIAL DUTY LACT BALL SCREW DRIVE

LINEAR ACTUATOR INDUSTRIAL DUTY LACT BALL SCREW DRIVE Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame with stainless steel extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [152mm], 8 [203mm], 12 [305mm],

More information

Crimpmate Range pitch 5.00

Crimpmate Range pitch 5.00 Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular

More information

SERIES PA SWING ARM CLAMPS for the Automotive Industry

SERIES PA SWING ARM CLAMPS for the Automotive Industry Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:

More information

Lifting Columns. Self Supporting, Compact and Versatile Linear Motion for Quicker Throughput, Minimal Downtime and No Maintenance

Lifting Columns. Self Supporting, Compact and Versatile Linear Motion for Quicker Throughput, Minimal Downtime and No Maintenance Self Supporting, Compact and Versatile Linear Motion for Quicker Throughput, Minimal Downtime and No Maintenance New! Now Available in Three Models Each with Unique Features Introducing the Thomson Lifting

More information

V SWISS MADE LINEAR TECHNOLOGY

V SWISS MADE LINEAR TECHNOLOGY Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile

More information

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

More information

esense article overview E series Document ID: E1409_ _esense 9000 article overview_r10.00

esense article overview E series Document ID: E1409_ _esense 9000 article overview_r10.00 esense article overview E1409-9000 series Document ID: E1409_20180518_esense 9000 article overview_r10.00 esense is a product by: Indes Production Management Pantheon 28 7521 PR Enschede PO box 265 7500

More information

Electrical position feedback for actuator sizes Ø mm

Electrical position feedback for actuator sizes Ø mm Electrical position feedback for actuator sizes Ø 40-125 mm Type 1062 can be combined with Simple installation, convertible or retrofittable Self-adjusting trip cam for closed position LEDs provide local

More information

LINEAR ACTUATOR INDUSTRIAL DUTY LACT ACME DRIVE SERIES

LINEAR ACTUATOR INDUSTRIAL DUTY LACT ACME DRIVE SERIES Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame and extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [152mm], 8 [203mm], 12 [305mm], 18 [457mm], 24 [610mm],

More information

Angle Seated Valves. ecoflo-as. Angle Seated Valves

Angle Seated Valves. ecoflo-as. Angle Seated Valves Angle Seated Valves ecofloas Angle Seated Valves AngleSeat Valves PNEUMATIC AND ELECTRIC VALVES PN / PN / PN / ANSI 0 / ANSI 00 series pneumatic and electric valves are designed as onoff or reglation valves

More information

adopts a holistic approach to patient transfers and is organized in four categories: transfer, positioning, support and lifting.

adopts a holistic approach to patient transfers and is organized in four categories: transfer, positioning, support and lifting. Manual - English 1 3 4 5 6 7 2 13 11 12 9 1. Boom 2. Mast 3. Handlebar 4. Battery pack 5. Emergency stop 6. Control box 7. Motor for base-width adjustment 8. Rear castors with brakes 9. SlingBar with safety

More information

SKF linear motion solutions for medical equipment

SKF linear motion solutions for medical equipment SKF linear motion solutions for medical equipment The Power of Knowledge Engineering The way to care In today s medical world, comfort and safety are key requirements. Hospital environments become more

More information

HEAVY LIFTERS FOR MATERIAL HANDLING

HEAVY LIFTERS FOR MATERIAL HANDLING HEAVY LIFTERS FOR MATERIAL HANDLING Ideal for automated, high load part liftg the automotive and assembly mache builder dustries Available as a drop- replacement M002 Mountg M001 Mountg Switches Stop Collars

More information

www.motiontech.com.au Copyright SERVOMECH This catalogue contents are under publisher copyright and may not be reproduced unless permission is agreed. Every care has been taken to ensure the accuracy of

More information

Instruction manual. RP800 - HYDRAULIC actuator, load 150Kg. RP815 - LINAK actuator, load 150Kg

Instruction manual. RP800 - HYDRAULIC actuator, load 150Kg. RP815 - LINAK actuator, load 150Kg HYDRAULIC patient lift RP800 - HYDRAULIC actuator, load 150Kg MA RP800_805_806_ 807_810_811_815 02 A_12-2010 Electric patient lifts RP805 - LINAK actuator, load 150Kg RP806 - HIWIN actuator, load 150Kg

More information

LoadMaster 80 rodless actuator

LoadMaster 80 rodless actuator LoadMaster 80 rodless actuator LoadMaster 80 Rodless actuator Two versions, for horizontal or vertical operation Rigid self supporting aluminium profi le Quiet operation for indoor domestic or medical

More information

2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65

2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal

More information

INTEGRATED HYDRAULIC BRAKE ACTUATORS

INTEGRATED HYDRAULIC BRAKE ACTUATORS INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit

More information

ZB0050 / ZB0051 ZB0070 / ZB0071

ZB0050 / ZB0051 ZB0070 / ZB0071 Operating instructions Safety Rope Emergency Stop Switches UK ZB0050 / ZB0051 ZB0070 / ZB0071 7390877 / 02 08/2013 Contents 1 Safety instructions...3 2 Installation / set-up...4 2.1 Applications...4 2.2

More information

Wedge clamps

Wedge clamps Wedge clamps Wedge clamps for dies with tapered clamping edge Without position monitoring up to 160 C* 2.24000 With position monitoring lateral fastening up to 100 C** 2.24001 With position monitoring

More information

Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves

Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Complete modular designed accessory program More for less - optimal configuration costs Easy maintenance and commissioning

More information

Actuator & Converter For Universal Applications. A1, 600(push) / 400(pull) Max. kgs A2, 300(push) / 200(pull) Max. kgs

Actuator & Converter For Universal Applications. A1, 600(push) / 400(pull) Max. kgs A2, 300(push) / 200(pull) Max. kgs FD Series AC DRIVES DC MOTOR UP TO 600KGS (push load) UP TO 400KGS (pull load) Actuator & Converter For Universal Applications Actuator Specification: Input Power: 12VDC or 24VDC Load Capacity: A1, 600(push)

More information

BALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. MASS [Kg] STROKE T STROKE LENGTH STROKE LENGTH. standard brake CODE

BALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. MASS [Kg] STROKE T STROKE LENGTH STROKE LENGTH. standard brake CODE BALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS BSA 10 AC motor Stroke La =Lc + Stroke Lc Capacitor T Rear bracket SP Pin Standard head with threaded hollow bore BA 80 depth 17 Stroke end reed switches FCM

More information

Tina 11A Connection block

Tina 11A Connection block Original instructions Tina 11A Connection block ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand this

More information

AEL6 Series Smart Electric Actuators for DN15 to DN100 Control Valves

AEL6 Series Smart Electric Actuators for DN15 to DN100 Control Valves Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

bar -20 C C ( C for high temperature version) 1000 mm

bar -20 C C ( C for high temperature version) 1000 mm Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature

More information

Standards ISO Max. particle size 50 µm. Pressure for determining piston forces. Materials: Polyurethane

Standards ISO Max. particle size 50 µm. Pressure for determining piston forces. Materials: Polyurethane Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: external thread 1 Standards ISO 21287 Compressed air connection Internal thread Working pressure min./max. 1 bar / 10 bar Ambient

More information

Fig Single-Acting Rotary Smart Positioner

Fig Single-Acting Rotary Smart Positioner Fig. 3303 Single-Acting Rotary Smart Positioner Order Information Model No. EC03303RSN52000S Econ series 3300 Smart Positioner for quarter turn actuators in single acting version. This positioner regulates

More information

The most comprehensive linear actuator available on the market today

The most comprehensive linear actuator available on the market today CMLA Introduction CMLA is the newest addition to the Duff Norton Linear Actuator line and incorporates the latest in design techniques, manufacturing methods and draws on more than 100 years of experience

More information

FUSERBLOC Fuse combination switches with rear connection for industrial fuses up to 400 A

FUSERBLOC Fuse combination switches with rear connection for industrial fuses up to 400 A Fuse protection fuser_737_a_1_cat.eps fuser_738_a_1_cat.eps The solution for > Motor load break > Protection of industrial processes FUSERBLOC REAR / FRONT connections 3 x 250 A fuser_739_a_1_cat.eps Strong

More information

APEM. LPI series. Tactile pushbutton switches with large actuator. Ø 35 mm actuator

APEM. LPI series. Tactile pushbutton switches with large actuator. Ø 35 mm actuator APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features

More information

NB80-160/161 A-F2-A-BQQE

NB80-160/161 A-F2-A-BQQE GRUNDFOS DATA BOOKLET NB8-16/161 A-F2-A-BQQE Grundfos pump 9943539 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nbe/9943539/nbe-125-315-275-as-f2-a-e-bqqe.html

More information

Novenco axial flow fans. ZerAx - Standard January 2010

Novenco axial flow fans. ZerAx - Standard January 2010 Novenco axial flow fans ZerAx - Standard January 2010 Product facts Product The Novenco ZerAx series of axial flow fans uses innovative design to reduce power consumption by improving efficiency. As an

More information

TELESCOPIC DOUBLE ACTING

TELESCOPIC DOUBLE ACTING GRAL SPCIICATIOS Our telescopic double acting metric range of hydraulic rams are designed for heavy duty industrial service. By utilising welded construction and our many years of experience, combined

More information

Ordering designation: G(Type) - (Stroke) - (Eye bolt) - (Cable length) - (Options) Legend:

Ordering designation: G(Type) - (Stroke) - (Eye bolt) - (Cable length) - (Options) Legend: General technical data: 1.) Anodised aluminium housing with a connecting rod made of aluminium (in the case of motor types G..B, G..C, G..D and G..E, the connecting rod is Ø18, for all other motor types

More information

Automatic COSYS PFC. Automatic power factor correction system NEW

Automatic COSYS PFC. Automatic power factor correction system NEW Automatic COSYS PFC Automatic power factor correction system NEW cosys_178_a_1_x_cat cosys_178_a_1_x_cat appli_xxx_a  Function Your reactive energy consumption vary depending on the type and using conditions

More information

well adjusted Round, wing and spindle-shaped knobs with the same standardised design and with matt surface.

well adjusted Round, wing and spindle-shaped knobs with the same standardised design and with matt surface. 104 combination knobs Order data on pages 194-199 well adjusted the product The name COMBINATION S stands for an exceedingly functional range of rotary buttons with a reliable collet fixture system. They

More information

SV TYPE SV1/SV2. part number structure example H-8. rollers. number of rollers. stroke diameter. part number 1.5

SV TYPE SV1/SV2. part number structure example H-8. rollers. number of rollers. stroke diameter. part number 1.5 SV TYPE SV1/SV2 part number structure example SVS 2 6 - RAS 2Z - UP accuracy grade specification blank high SV standard P precision SVS anticorrosion UP high-precision number of rollers cage type blank

More information

ROR Trailer Products Axle & Brake Parts List LM and LC Series Axles including disc and drum brake variants

ROR Trailer Products Axle & Brake Parts List LM and LC Series Axles including disc and drum brake variants ROR Trailer Products Axle & Brake Parts List LM and LC Series Axles including disc and drum brake variants LM/LC Hub Assembly 14 1 3 10 9 19 20 8 5 6 7 11 1 4 2 18 16 13 17 15 13 12 2 LM/LC Hub Assembly

More information

AIR CYLINDER Series A12, A13

AIR CYLINDER Series A12, A13 A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long

More information

Machine elements. Pneumatic stamping unit. Toggle-lever presses

Machine elements. Pneumatic stamping unit. Toggle-lever presses Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07

More information

CP-9301 CP Application. Features. Applicable Literature. Electronic Actuator Drives General Instructions

CP-9301 CP Application. Features. Applicable Literature. Electronic Actuator Drives General Instructions CP-90 CP-90 Electronic Drives General Instructions Application The CP-90 and CP-90 electronic actuator drives process a variable input signal from a controller to provide proportional control of an electric

More information

XG*-***-****-***-****

XG*-***-****-***-**** Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...

More information

Pneumatic control unit for decentralized automation of ELEMENT process valves

Pneumatic control unit for decentralized automation of ELEMENT process valves 890 Pneumatic control unit for decentralized automation of ELEMENT process valves Type 890 can be combined with... Compact design Integrated pilot valve with manual override Integrated control air routing

More information