EX-6 series D&D' K G I H J A B

Transcription

1 X- series D&D' K I H J Illustrations show diesel engine type. Distance between tumblers 0 mm Undercarriage length 7 70 mm ounterweight clearance 10 mm D Rear-end swing radius 90 mm D' Rear-end length 190 mm Overall width of upperstructure 00 mm Overall height of cab 7 50 mm Min. ground clearance 00 mm H Track gauge mm I Track shoe width mm J Undercarriage width 000 mm K Track height 00 mm HYDRULI XVTOR X00- with Diesel ngine ngine ross Power : kw (1 500 HP) Operating Weight : Loading Shovel : kg ackhoe : kg X00- with lectric Motor Power Output : 0 kw Operating Weight : Loading Shovel : 000 kg ackhoe : kg ucket apacity Loading Shovel ucket : Heaped : m 3 ackhoe ucket : S, PS Heaped : 17.0 m 3 Heaped : 15.0 m 3

2 SPIITIONS X00- NIN Model... ummins QSKT50- mission ertification... U.S. P Tier Type... Water-cooled, -cycle, 1-cylinder, turbo-charged and after-cooled, direct injection chamber-type diesel engine Rated power S J1995, gross kw (1 500 HP) at 1 00 min-¹ (rpm) Net kw (1 3 HP) at 1 00 min-¹ (rpm) Maximum torque N. m (70 kgf m) at 1 00 min-¹ (rpm) Piston displacement L ore and stroke mm x 159 mm Starting system... V electric motor atteries... x V, x 0 H old starting... ther aided HYDRULI SYSTM Hitachi's TS (lectronic Total control System) can achieve maximum job efficiency by reducing fuel consumption and noise levels, while maximizing productivity through the optimization of engine-pump functions with excellent controllability increasing operator comfort. -P ontrol (omputer-aided ngine-pump ontrol system) Main pumps regulated by electric engine speed sensing control system. OHS (Optimum Hydraulic System) main pumps and 3 valves system enable both independent and combined operations of all functions. PS (uel-saving Pump System) PS minimizes energy loss with superior performance in fine control. uto-idling system for saving fuel and reducing noise. Hydraulic drive cooling-fan system for oil cooler. orced-lubrication and forced-cooling pump drive system. Main pumps... variable-displacement, axial piston pumps for front attachment, travel and swing Max. oil flow... X 375 L/min, X 5 L/min Pilot pump... 1 gear pump Max. oil flow... L/min Relief Valve Settings Implement circuit... Swing circuit... Travel circuit... Pilot circuit MPa (300 kgf/cm²) 7. MPa (0 kgf/cm²) 9. MPa (300 kgf/cm²) 3.9 MPa ( 0 kgf/cm²) Hydraulic ylinders High-strength piston rods and tubes adopted. ylinder cushion mechanisms are provided for boom, arm, bucket and dump cylinders. ucket cylinders of loading shovel are provided with protector. ylinder Dimensions Loading shovel Quan. ore Rod diameter oom 3 mm 30 mm rm 1 0 mm mm ucket 50 mm 10 mm Dump 15 mm 130 mm Level 1 3 mm 30 mm ackhoe Quan. ore Rod diameter oom 3 mm 30 mm rm 1 0 mm 00 mm ucket 1 30 mm 170 mm Hydraulic ilters ll hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Qty. ull flow filter 3 µm High pressure strainer 0 meshes (In main & swing pump delivery line) Drain filter 1 µm (or all plunger type pumps & motors) y-pass filter 1 5 µm (In oil cooler by-pass line) Pilot filter 1 µm These filters are centralized in arrangement for facilitating maintenance. ONTROLS Implement Levers lectric joystick control levers. Right lever is for boom and bucket control, left lever for swing and arm control. or loading shovel, pedals provided for opening/closing the bottom dump bucket. Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks. 1 Left onsole ucket lose Pedal (or Loading Shovel) Left ontrol Lever/Horn Switch 11 ucket Open Pedal (or Loading Shovel) 3 Left Travel Pedal Pilot ontrol Shut-Off Lever Left Travel Lever 13 Rear onsole 5 Right Travel Lever 1 mergency ngine Stop Switch Right Travel Pedal 15 ngine Speed ontrol Dial 7 Right ontrol Lever/Horn Switch 1 Key Switch Right onsole 17 Monitor Display 9 Operator s Seat UPPRSTRUTUR Revolving rame deep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness. Deck Machinery Maintenance accessibility is the major feature in the layout of deck machinery. s provide easy access to engine, hydraulic and electrical components. ISO-met stairs and handrails. s and stairs are provided with skid-resistant plates. 1 Diesel ngine 15 uel Tank Pump Drive Unit 1 attery Unit 3 Hydraulic Pump x 17 Lubricator Hydraulic Oil ooling an Motor 1 High Pressure Strainer x 5 Hydraulic Oil ooler 19 Reserve Tank (ngine Oil) ngine Radiator 0 Reserve Tank (oolant) 7 LT Radiator 1 ir ilter x (Outer/Inner) uel ooler Muffler 9 Pump Transmission Oil ooler 3 uel ilter (Water Separator) ngine-pump ulkhead ab 11 ontrol Valve x 3 5 Ladder Swing Device x olding Stairs 13 enter Joint 7 Ladder 1 Hydraulic Tank Swing Device high-torque, axial-piston motors with two-stage planetary gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Parking brake of springset/hydraulic-released disc type. This parking brake is manually releasable. Swing speed min -1 (rpm) Operator's ab The sturdy cab, with OP top guard level ll (ISO), helps protect the operator from falling objects. Independent, pressurized, 1 00 mm wide, 150 mm high, roomy 7.5m³ cab with tinted-glass windows features all-round visibility. ir-suspension type, fully adjustable reclining seat with armrests; movable with or without front & swing control levers by slide. Instruments and control panel are within easy reach of the operator. 3 air conditioner system. Noise level... 7 d() in the cab; on max. engine speed under no-load condition ye level height mm UNDRRRI Tracks Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive tumblers with floating seals. Opposed double-type upper rollers for easy removal of mud. Track shoes of induction-hardened cast steel with triple grousers. Specially heat-treated connection pins. Hydraulic track adjuster provided with N gas accumulator with relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device. Shovel-type Undercarriage Triple grouser track shoes of induction-hardened cast steel. Shoe width mm Numbers of Rollers and Shoes (each Side) Upper rollers... 3 Lower rollers... Track shoes Travel Device ach track driven by high-torque, axial piston motors, allowing counter rotation of tracks. -stage planetary gear plus spur gears reduction device. Dual-support-type traction device. Parking brake of spring-set/ hydraulic-released disc type. This parking brake is manually releasable. Travel speeds... High : 0 to.3 km/h Low : 0 to 1. km/h Maximum traction force kn ( kgf) radeability... 5 %(30 degree) max. WIHTS ND ROUND PRSSUR Loading Shovel quipped with 15.0 m 3 (heaped) bottom dump bucket Shoe type Shoe width Operating weight round pressure Triple grousers mm kg 13 kpa (1.7 kgf/cm ) ackhoe quipped with.7 m boom, 3.9 m arm, and 17.0 m 3 (S, PS heaped) bucket Shoe type Shoe width Operating weight round pressure Triple grousers mm kg 15 kpa (1.9 kgf/cm ) SRVI RILL PITIS litters uel tank ngine coolant 7 ngine oil ngine oil pan 150 Reserve tank 05 Pump drive 30 Swing drive device ( units) x 0 Travel drive device ( units) x 137 Hydraulic system Hydraulic oil tank 1 30 LODIN SHOVL TTHMNTS oom and arm are of all-welded, low-stress, high-tensile strength steel full-box section design. fficient, automatic level crowing achieved by one-lever control as the parallel link mechanism keeps the bucket digging angle constant, and level cylinder circuit maintains the bucket height constant (uto-leveling rowd Mechanism). uto-lubrication system for all pins is standard. 3

3 SPIITIONS QUIPMNT X00- WORKIN RNS KHO TTHMNTS STNDRD QUIPMNT Standard equipment may vary by country, so please consult your Hitachi dealer for details. Meter 1 1 0, H D Meter ucket capacity (heaped) 15.0 m³ Min. digging distance 5 30 Min. level crowding distance 7 90 Level crowding distance 90 D Max. digging reach 1 00 Max. cutting height 15 0 Max. dumping height 350 Max. digging depth 3 70 Working radius at max. dumping height H Max. bucket opening width 150 rm crowding force on ground 91 kn (93 00 kgf) ucket digging force 93 kn (9 00 kgf) H round Line ucket capacity (heaped) 1.5 m³ Min. digging distance 5 00 Min. level crowding distance 0 Level crowding distance 90 D Max. digging reach Max. cutting height Max. dumping height 350 Max. digging depth 3 90 Working radius at max. dumping height H Max. bucket opening width 150 rm crowding force on ground 907 kn (9 500 kgf) ucket digging force 73 kn (9 000 kgf) ucket apacity No.of Width (heaped) teeth Weight Type Materials density 15.0 m³ mm kg 1 00 kg/m³ or less 1.5 m³ mm kg 1 00 kg/m³ or less : ottom dump type general purpose bucket oom and arm are of all-welded, low-stress, full-box section design. ucket of all-welded, high-strength steel structure. ucket/arm joint pins are floating type. Replaceable thrust plates are provided with bucket/arm joint part. utolubrication system for all pins is standard. WORKIN RNS Meter D round Line -boom length.7 m -arm length 3.9 m Max. digging reach 1 00 ' Max. digging reach (on ground) Max. digging depth 50 ' Max. digging depth (' level) 150 Max. cutting height D Max. dumping height 0 D Min. dumping height 50 Min. swing radius Max. vertical wall 1 Min. level crowding distance 900 ucket digging force ISO 30 kn ( 00 kgf) S, PS 70 kn ( kgf) rm crowd force ISO 75 kn (0 000 kgf) S, PS 75 kn (7 000 kgf) ucket S, PS heaped D,, Meter apacity heaped H Without side cutters Width,, Without side cutters No.of teeth 17.0 m³ 15.0 m³ 3 50 mm kg Weight Type Materials density 1 00 kg/m³ or less : eneral purpose bucket NIN alternator Heavy-duty type air cleaner with dust ejector artridge-type engine oil filter artridge-type engine oil bypass filter artridge-type fuel filter Water filter Radiator reserve tank an guard Isolation-mounted engine Pre-lubrication system uto-idle system mergency engine stop system HYDRULI SYSTM -P control system OHS (Optimum Hydraulic System) PS (uel-saving Pump System) Hydraulic drive cooling-fan system orced-lubrication and forced cooling pump drive system ontrol valve with main relief valve Suction filter ull-flow filter ypass filter Pilot filter Drain filter High-pressure strainer OP top guard level ll (ISO) luid-filled elastic mounts Laminated glass windshield Reinforced/tinted (bronze color) glass side and rear windows Parallel-link-type intermittent windshield wiper Windshield washer djustable reclining seat with air suspension ootrest ir horn with electric compressor uto-tuning M-M radio with digital clock Seat belt Hot & cool-box Storage spaces loor mat ir conditioner with defroster Rearview mirror vacuation hammer mergency escape device Trainer's seat Pilot control shut-off lever OPTIONL QUIPMNT ast-filling couplers old weather package Satellite data transmitting system Travel motor guard Travel device guard 9 high brightness working lights color monitor cameras; front and rear old weather package* Highland application* *: engineered on request MONITOR SYSTMS Meters: Hourmeter uel gauge Hydraulic oil temperature gauge ngine coolant temperature gauge Tachometer ngine oil pressure gauge ngine oil temperature gauge attery voltage gauge mbient temperature Pilot lamps (reen): Pre-lubrication system uto-idle Travel Mode Warning lamps (Red): lternator ngine stop oolant overheat Hydraulic oil level uto-lubrication system ast-filling Tension lectric lever mergency engine stop Top valve ngine over run oolant level ngine oil pressure Pump transmission oil level indicator Warning lamp (Yellow): xhaust temperature uel temperature ngine warning Hydraulic oil overheat Stairway position lectrical equipment box Pump contamination ir cleaner restriction larm buzzers: Overheat ngine coolant pressure ngine coolant level uel temperature ngine oil pressure ngine oil temperature ir intake manifold temperature rank case pressure Pump transmission oil level Hydraulic oil level Stop valve close ast-filling system panel position Stairway position lectric lever fault DT LOIN SYSTM DLU(Data-logging unit) continuously records performance of the engine and the hydraulic system. The record can be downloaded by P and PD. LIHTS 9 working lights entrance lights 3 maintenance lights UPPRSTRUTUR Lockable machine covers kg counterweight Hydraulic drive grease gun with hose reel olding stairs with wide steps Swing parking brake ngine oil reserve system UNDRRRI Travel parking brake Travel motion alarm device Hydraulic track adjuster with N gas accumulator and relief valve mm triple grouser shoes MISLLNOUS Standard tool kit Stairs and handrails (Meeting ISO) Recirculation air filter for air conditioner Ventilation air filter for air conditioner V power terminal board Stop valve for transport and reassembly uto-lubrication system(lincoln) for front-attachment pins, swing bearing, and center joint ngine oil reserve system ST-ILLIN SYSTM ast-filling system (Wiggins) for fuel, hydraulic oil, coolant, swing device oil, pump transmission oil, engine oil, and grease (couplers not included). Optional equipment may vary by country, so please consult your Hitachi dealer for details. 5

4 SPIITIONS X00- LTRI MOTOR High Voltage, Three Phase, Squirrel age Induction Motor, Totally nclosed ir-to-ir-ooled (T). Type... HITHI TO-KK Rating Rated continuous output... 0 kw Voltage V / 50 Hz V / 0 Hz Number of poles... Synchronous RPM min -1 / 50 Hz 1 00 min -1 / 0 Hz Rated current V Insulation class... class raise Space heater included. Thermo-guard (temperature detector) Starting condition... Reactor 50 % tap HYDRULI SYSTM OHS (Optimum Hydraulic System) main pumps and 3 valves system enable both independent and combined operations of all functions. Hydraulic drive cooling-fan system for oil cooler. orced-lubrication and forced-cooling pump drive system. Main pumps... variable-displacement, axial piston pumps for front attachment, travel and swing Max. oil flow... X 375 L/min, X 5 L/min Pilot pump... 1 gear pump Max. oil flow... L/min Relief Valve Settings Implement circuit... Swing circuit... Travel circuit... Pilot circuit MPa (300 kgf/cm²) 7. MPa (0 kgf/cm²) 9. MPa (300 kgf/cm²) 3.9 MPa ( 0 kgf/cm²) Hydraulic ylinders High-strength piston rods and tubes adopted. ylinder cushion mechanisms are provided for boom, arm, bucket and dump cylinders. ucket cylinders of loading shovel are provided with protector. ylinder Dimensions Loading shovel Quan. ore Rod diameter oom 3 mm 30 mm rm 1 0 mm mm ucket 50 mm 10 mm Dump 15 mm 130 mm Level 1 3 mm 30 mm ackhoe Quan. ore Rod diameter oom 3 mm 30 mm rm 1 0 mm 00 mm ucket 1 30 mm 170 mm Hydraulic ilters ll hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Qty. ull flow filter 3 µm High pressure strainer 0 meshes (In main & swing pump delivery line) Drain filter 1 µm (or all plunger type pumps & motors) y-pass filter 1 5 µm (In oil cooler by-pass line) Pilot filter 1 µm These filters are centralized in arrangement for facilitating maintenance. ONTROLS Implement Levers lectric joystick control levers. Right lever is for boom and bucket control, left lever for swing and arm control. or loading shovel, pedals provided for opening/closing the bottom dump bucket. Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks. 1 1 Left onsole 9 Operator s Seat Left ontrol Lever/Horn Switch ucket lose Pedal (or Loading Shovel) 3 Left Travel Pedal 11 ucket Open Pedal (or Loading Shovel) Left Travel Lever Pilot ontrol Shut-Off Lever 5 Right Travel Lever 13 Rear onsole Right Travel Pedal 1 mergency Motor Stop Switch 7 Right ontrol Lever/Horn Switch 15 Key Switch Right onsole 1 Monitor Display UPPRSTRUTUR Revolving rame deep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness. Deck Machinery Maintenance accessibility is the major feature in the layout of deck machinery. s provide easy access to motor, hydraulic and electrical components. ISO-met stairs and handrails. s and stairs are provided with skid-resistant plates. 1 Main Motor ontrol Valve x 3 oupler 13 Swing Device x 3 Pump Drive Unit 1 Slip Ring Hydraulic Pump x 15 enter Joint 5 Hydraulic Oil ooling an Motor 1 High-Pressure Strainer x Hydraulic Oil ooler x 17 attery x 7 Lubricator 1 ab Pump Transmission Oil ooler 19 olding Stairs 9 Motor-Pump ulkhead 0 Ladder Hydraulic Oil Tank 1 ab Heater Unit 11 ubicle Ladder Swing Device high-torque, axial-piston motors with two-stage planetary gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Parking brake of springset/hydraulic-released disc type. This parking brake is manually releasable. Swing speed min -1 (rpm) Operator's ab The sturdy cab, with OP top guard level ll (ISO), helps protect the operator from falling objects. Independent, pressurized, 1 00 mm wide, 150 mm high, roomy 7.5m³ cab with tinted-glass windows features all-round visibility. ir-suspension type, fully adjustable reclining seat with armrests; movable with or without front & swing control levers by slide. Instruments and control panel are within easy reach of the operator. 3 air conditioner system. ye level height mm UNDRRRI Tracks Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive tumblers with floating seals. Opposed double-type upper rollers for easy removal of mud. Track shoes of induction-hardened cast steel with triple grousers. Specially heat-treated connection pins. Hydraulic track adjuster provided with N gas accumulator with relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device. Shovel-type Undercarriage Triple grouser track shoes of induction-hardened cast steel. Shoe width mm Numbers of Rollers and Shoes (each Side) Upper rollers... 3 Lower rollers... Track shoes Travel Device ach track driven by high-torque, axial piston motors, allowing counter rotation of tracks. -stage planetary gear plus spur gears reduction device. Dual-support-type traction device. Parking brake of spring-set/ hydraulic-released disc type. This parking brake is manually releasable. Travel speeds... High : 0 to. km/h Low : 0 to 1.5 km/h Maximum traction force kn ( kgf) radeability... 5 %(30 degree) max. WIHTS ND ROUND PRSSUR Loading Shovel quipped with 15.0 m 3 (Heaped) bottom dump bucket Shoe type Shoe width Operating weight round pressure Triple grousers mm 000 kg 10 kpa (1. kgf/cm ) ackhoe quipped with.7 m boom, 3.9 m arm, and 17.0 m 3 (S, PS heaped) bucket Shoe type Shoe width Operating weight round pressure Triple grousers mm kg 1 kpa (1. kgf/cm ) SRVI RILL PITIS litters Pump drive 30 Swing drive device ( units) x 0 Travel drive device ( units) x 137 Hydraulic system Hydraulic oil tank 1 30 LODIN SHOVL TTHMNTS oom and arm are of all-welded, low-stress, high-tensile strength steel full-box section design. fficient, automatic level crowing achieved by one-lever control as the parallel link mechanism keeps the bucket digging angle constant, and level cylinder circuit maintains the bucket height constant (uto-leveling rowd Mechanism). uto-lubrication system for all pins is standard. 7

5 SPIITIONS QUIPMNT X00- WORKIN RNS KHO TTHMNTS STNDRD QUIPMNT Standard equipment may vary by country, so please consult your Hitachi dealer for details. Meter 1 1 0, H D Meter ucket capacity (heaped) 15.0 m³ Min. digging distance 5 30 Min. level crowding distance 7 90 Level crowding distance 90 D Max. digging reach 1 00 Max. cutting height 15 0 Max. dumping height 350 Max. digging depth 3 70 Working radius at max. dumping height H Max. bucket opening width 150 rm crowding force on ground 91 kn (93 00 kgf) ucket digging force 93 kn (9 00 kgf) ucket capacity (heaped) 1.5 m³ Min. digging distance 5 00 Min. level crowding distance 0 Level crowding distance 90 D Max. digging reach Max. cutting height Max. dumping height 350 Max. digging depth 3 90 Working radius at max. dumping height H Max. bucket opening width 150 rm crowding force on ground 907 kn (9 500 kgf) ucket digging force 73 kn (9 000 kgf) H round Line oom and arm are of all-welded, low-stress, full-box section design. ucket of all-welded, high-strength steel structure. ucket/arm joint pins are floating type. Replaceable thrust plates are provided with bucket/arm joint part. utolubrication system for all pins is standard. WORKIN RNS Meter D D,, H Meter,, round Line -boom length.7 m -arm length 3.9 m Max. digging reach 1 00 ' Max. digging reach (on ground) Max. digging depth 50 ' Max. digging depth (' level) 150 Max. cutting height D Max. dumping height 0 D Min. dumping height 50 Min. swing radius Max. vertical wall 1 Min. level crowding distance 900 ucket digging force ISO 30 kn ( 00 kgf) S, PS 70 kn ( kgf) rm crowd force ISO 75 kn (0 000 kgf) S, PS 75 kn (7 000 kgf) LTRI MOTOR Space heater included Thermo-guard (temperature detector) HYDRULI SYSTM OHS (Optimum Hydraulic System) Hydraulic drive cooling-fan system orced-lubrication and forced cooling pump drive system ontrol valve with main relief valve Suction filter ull-flow filter ypass filter Pilot filter Drain filter High-pressure strainer OP top guard level ll (ISO) luid-filled elastic mounts Laminated glass windshield Reinforced/tinted (bronze color) glass side and rear windows Parallel-link-type intermittent windshield wiper Windshield washer djustable reclining seat with air suspension ootrest ir horn with electric compressor uto-tuning M-M radio with digital clock Seat belt Hot & cool-box Storage spaces loor mat ir conditioner with defroster Rearview mirror vacuation hammer mergency escape device Trainer's seat Pilot control shut-off lever MONITOR SYSTMS Meters: Hourmeter Main motor coil temperature gauge Main motor ammeter Main motor voltmeter lock attery voltage gauge Hydraulic oil temperature gauge mbient temperature Pilot lamps (reen): Main motor run Travel mode Warning lamps: (Red): Pump transmission oil level 00V power source ubicle box Hydraulic oil level uto-lubrication system Stop valve 3 relay Main motor overheat Main motor start congestion V power source attery charge lectric lever mergency motor stop Tension Warning lamps: (Yellow): lectrical equipment box Stairway position Hydraulic oil overheat Pump contamination ab.heater Warning lamps: (mber): ast-filling larm buzzers: 00V power source ubicle box Hydraulic oil level Stop valve Stairway position Pump transmission oil level 3 relay Main motor overheat Main motor start congestion V power source lectric lever ast-filling DT LOIN SYSTM DLU(Data-logging unit) continuously records performance of the hydraulic system. The record can be downloaded by P and PD. LIHTS 9 working lights entrance lights 3 maintenance lights UPPRSTRUTUR Lockable machine covers kg counterweight Hydraulic drive grease gun with hose reel olding stairs with wide steps Swing parking brake UNDRRRI Travel parking brake Travel motion alarm device Hydraulic track adjuster with N gas accumulator and relief valve mm triple grouser shoes MISLLNOUS Standard tool kit Stairs and handrails (Meeting ISO) Recirculation air filter for air conditioner Ventilation air filter for air conditioner V power terminal board Stop valve for transport and reassembly uto-lubrication system(lincoln) for front-attachment pins, swing bearing, and center joint ST-ILLIN SYSTM ast-filling system (Wiggins) for hydraulic oil, swing device oil, pump transmission oil, and grease (couplers not included). ucket apacity No.of Width (heaped) teeth Weight Type Materials density 15.0 m³ mm kg 1 00 kg/m³ or less 1.5 m³ mm kg 1 00 kg/m³ or less : ottom dump type general purpose bucket ucket S, PS heaped apacity heaped Without side cutters Width Without side cutters No.of teeth 17.0 m³ 15.0 m³ 3 50 mm kg Weight Type Materials density 1 00 kg/m³ or less : eneral purpose bucket OPTIONL QUIPMNT ast-filling couplers old weather package Satellite data transmitting system Travel device guard 9 high brightness working lights color monitor cameras; front and rear old weather package* *: engineered on request Optional equipment may vary by country, so please consult your Hitachi dealer for details. 9

6 TRNSPORTTION Illustrations show diesel engine type. asily assembled owing to local assembling system requiring no welding. UPPRSTRUTUR ab assembly Weight : 1 70 kg ab bed Weight : 50 kg Weight : 71 kg Weight : 7 kg Weight : 77 kg Weight : 9 kg Weight : kg Weight : 3 kg Ladder Weight : 0 kg Weight : 37 kg Width : 1 0 Width : 1 0 Width : 1 90 Width : 1 90 Width : 1 90 Width : 150 Width : 150 Width : 5 Width : Width : 0 Weight : 5 kg Main frame assembly Weight : kg uel tank Weight : 500 kg 930 Weight : 3 kg Weight : 1 kg Weight : 13 kg ender Weight : 13 kg Weight : 7 kg Weight : 7 kg Width : Width : Width : Width : 50 Width : Width : 30 Width : Weight : 30 kg 1 0 Weight : 9 kg 0 50 Weight : 15 kg ox Weight : 977 kg racket Weight : 0 kg Weight : kg Weight : 333 kg Weight : 1 kg Weight : 3 kg 1 0 Hose reel Weight : 5 kg Width : Width : 30 Width : Width : 70 Width : 0 Width : Width : 1 0 Width : 1 0 Width : 50 Width : 70 Weight : 3 kg olding stairs Weight : 773 kg Weight : 150 kg ender Weight : 191 kg Weight : 73 kg Weight : 1 kg Weight : 33 kg Weight : 33 kg Weight : 1 kg Weight : 3 kg Width : 90 3 Width : Width : Width : Width : Width : Width : Width :

7 TRNSPORTTION UPPRSTRUTUR UNDRRRI Weight : 1 kg Weight : 39 kg Weight : 11 kg Weight : kg Weight : 5 kg Track center frame assembly Weight : 1 00 kg Track side frame assembly Weight : kg X ngine unit Weight : 1 0 kg Door Weight : kg Door Weight : kg ir cleaner assembly Weight : 3 kg Width : Width : 30 with travel device Weight : kg Ladder Weight : 13 kg 130 Width : 500 Width : 50 Width : Muffler Weight : 570 kg Reserve tank Weight : 150 kg Width : 30 Width : Width : 1 Width : 00 Motor cover stay Weight : 7 kg Width : Weight : kg ender Weight : 7 kg ender Weight : kg Width : 00 Width : 03 Width : Width : Width : 5 Width : 50 Width : 50 Width : 50 over Weight : 9 kg over Weight : kg over Weight : 7 kg ounterweight Weight : 9 00 kg Weight : 35 kg Weight : 33 kg Width : 1 Width : Width : Width : 79 Width : 50 Width : 50 13

8 TRNSPORTTION LITIN PITIS LODIN SHOVL TTHMNTS ucket assembly oom-arm assembly : Load radius : Load point height : Lifting capacity Weight : kg MTRI MSUR Rating over-side or 30 degree Rating over-front Unit: kg ucket cylinder Weight : 1 70 kg X 30 apacity (heaped) Width Weight 15.0 m³ 3 0 mm 3 0 mm 3 0 mm kg 1.5 m³ mm 3 30 mm 3 0 mm kg 50 rm cylinder Weight : 0 kg Width : 00 oom cylinder Weight : 90 kg X onditions X00- -boom.7 m -arm 3.9 m ucket S, PS : 17.0 m³ : 15.0 m³ Shoes mm Load point height Load radius m m m m 1 m t max. reach m *3. *3. *.3 * m *7.9 *7.9 *1.5 *1.5 *.1 * m *33. *33. *3.5 *3.5 *.7 *.7 *.3 * m *51.1 * *39.5 * *11.1 * m 50.1 * *1.3 *3.. *.3 * (round).1 * *0.9 * *1.5 * m *33. * * *37. *0.3 *0.3 - m *. *. *39.3 *39.3 *3. *3. *7.7 *7.7 Notes: 1.Ratings are based on S J97..Lifting capacity of the X Series does not exceed 75% of tipping load with the machine on firm, level ground or 7% full hydraulic capacity. 3.The load point is a hook (not standard equipment) loaded on the back of the bucket..*indicates load limited by hydraulic capacity. meter Width : 70 Width : 700 Width : 90 KHO TTHMNTS ucket assembly apacity (S, PS heaped) : 17.0 m 3 Weight : kg -boom assembly Weight : 500 kg Width : Width : 3 00 oom cylinder Weight : 3 0 kg x -arm assembly Weight : 1 0 kg Width : 90 Width :

9 These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features. efore use, read and understand the Operator s Manual for proper operation. Hitachi onstruction Machinery o., Ltd. KS-N (K/K,HT3) Printed in Japan