EX SPECIFICATIONS

Transcription

1 EX SPECIFICATIONS BACKHOE BUCKET CAPACITY: (SAE HEAPED): 17.0 M 3 (22.2 CU. YD.) SHOVEL BUCKET CAPACITY (HEAPED): M 3 ( CU. YD.) OPERATING WEIGHT: BACKHOE: KG (560,000 LB.) LOADING SHOVEL: KG (556,000 LB.) RATED POWER: 1119 KW (1,500 HP)

2 EX DIMENSIONS 8040 mm (26' 5") Rear-end swing radius 6290 mm (20' 8") Rear-end length 6190 mm (20' 4") 2060 mm (6' 9") 7250 mm (23' 9") 800 mm (31") 2160 mm (7' 1") 00 mm (39") 5000 mm (16' 5") 6000 mm (19' 8") 6120 mm (20' 1") 7870 mm (25' ") STANDARD EQUIPMENT Engine 140-amp alternator Heavy-duty-type air cleaner with dust ejector Cartridge-type engine oil fi lter Cartridge-type engine oil bypass fi lter Cartridge-type fuel fi lter Water fi lter Radiator reserve tank Fan guard Isolation-mounted engine Pre-lubrication system Auto-idle system Emergency engine stop system Hydraulic System Engine-Pump control system (EP) Optimum Hydraulic System (OHS) Fuel-Saving Pump System (FPS) Hydraulic drive cooling-fan system Forced-lubrication and forced-cooling pumpdrive system Control valve with main relief valve Suction fi lter Full-fl ow fi lter Bypass fi lter Pilot fi lter Drain fi lter High-pressure strainer Cab OPG top guard level ll (ISO) Fluid-fi lled elastic mounts Laminated glass windshield Reinforced/tinted (bronze color) glass side and rear windows Parallel-link-type intermittent windshield wiper Windshield washer Adjustable reclining seat with air suspension Footrest Air horn with electric compressor Auto-tuning AM-FM radio with digital clock Seat belt Hot and cool box Storage spaces Floor mat Air conditioner with defroster Rearview mirror Evacuation hammer Emergency-escape device Trainer's seat Pilot control shutoff lever Monitor Systems Meters: Hour meter Fuel gauge Hydraulic oil temperature gauge Engine coolant temperature gauge Tachometer Engine oil pressure gauge Engine oil temperature gauge Battery voltage gauge Ambient temperature Pilot lamps (green): Pre-lubrication system Auto-idle Travel mode Warning lamps (red): Alternator Engine stop Coolant overheat Hydraulic oil level Auto-lubrication system Fast-fi lling Tension Electric lever Emergency engine stop Top valve Engine overrun Coolant level Engine oil pressure Pump transmission oil level indicator Warning lamp (yellow): Exhaust temperature Fuel temperature Engine warning Hydraulic oil overheat Stairway position Electrical equipment box Pump contamination Air cleaner restriction Alarm buzzers: Overheat Engine coolant pressure Engine coolant level Fuel temperature Engine oil pressure Engine oil temperature Air intake manifold temperature Crankcase pressure Pump transmission oil level Hydraulic oil level Stop valve close Fast-fi lling system panel position Stairway position Electric lever fault Data Logging System Data-Logging Unit (DLU) continuously records the performance of the engine and the hydraulic system; data can be downloaded by PC Satellite data-transmitting system Lights 9 high-brightness working lights 2 entrance lights 3 maintenance lights Upperstructure Lockable machine covers kg (66,137.6 lb.) counterweight Hydraulic-drive grease gun with hose reel Folding stairs with wide steps Swing parking brake Engine oil reserve system Undercarriage Travel parking brake Travel motion alarm device Hydraulic track adjuster with N2 gas accumulator and relief valve 00-mm (39 in.) triple-grouser shoes Miscellaneous Standard tool kit Stairs and handrails (ISO) Recirculation air fi lter for air conditioner Ventilation air fi lter for air conditioner 12-volt power terminal board Stop valve for transport and reassembly Lincoln auto-lubrication system for front-attachment pins, swing bearing, and center joint 4 color monitor cameras (2 front and 2 rear) Engine oil reserve system Fast-Filling System Wiggins fast-fi lling system for fuel, hydraulic oil, coolant, swing-device oil, pump transmission oil, engine oil, and grease OPTIONAL EQUIPMENT Cold-weather package Travel motor guard Travel device guard 2

3 EX SPECIFICATIONS ENGINE Make Model Type Aspiration Gross 1800 min -1 (rpm) (SAE J1995) Net 1800 min -1 (rpm) Maximum 1400 min -1 (rpm) Piston displacement Bore and stroke Starting system Batteries Cold starting Cummins QSKTA50C Water-cooled, 4-cycle, 16-cylinder Turbocharged and aftercooled, direct-injection chamber-type diesel engine 1119 kw (1,500 hp) 69 kw (1,434 hp) 6570 N m / 670 kgf m (4,846 lbf ft.) 50.0 L (3051 cu. in.) 159 mm X 159 mm (6.3 in. X 6.3 in.) 24-volt electric motor 4 X 12 V, 4 X 220 AH Ether aided HYDRAULIC SYSTEM Hitachi s Electronic Total Control System (ETS) achieves maximum job effi ciency by reducing fuel consumption and noise levels, and maximizes productivity through the optimization of engine-pump functions with excellent controllability, increasing operator comfort. Engine-Pump (E-P) Control Main pumps regulated by electric engine speed-sensing control system. Optimum Hydraulic System (OHS) 6 main pumps and 3-valve system enable both independent and combined operations of all functions. Fuel-Saving Pump System (FPS) Minimizes energy loss with superior performance and fi ne control. Additional Features Auto-idle system saves fuel and reduces noise. Hydraulic-drive cooling-fan system for oil cooler. Forced-lubrication and forced-cooling pump-drive system. Main/Swing Pumps 6 variable-displacement, axial-piston pumps for front attachment, travel, and swing. Maximum oil fl ow 4 X 375 L/min / 2 X 425 L/min (4 X U.S. gal./min. / 2 X U.S. gal./min.) Pilot Pump One gear pump Maximum oil fl ow 8 L/min (28.5 U.S. gal./min.) Relief Valve Settings Implement circuit Swing circuit Travel circuit Pilot circuit 29.4 MPa / 300 kgf/cm² (4,263 psi) 27.4 MPa / 280 kgf/cm² (3,973 psi) 29.4 MPa / 300 kgf/cm² (4,263 psi) 3.9 MPa / 40 kgf/cm² (565.5 psi) Hydraulic Cylinders High-strength piston rods and tubes adopted for durability. Cylinder-cushion mechanisms provided for boom, arm, bucket, and dump cylinders. Loading shovel bucket cylinders provided with protector. Cylinder Dimensions (Backhoe) Cylinder Dimensions (Loading Shovel) Quantity Bore Rod Diameter Quantity Bore Rod Diameter Boom 2 3 mm (12 in.) 230 mm (9 in.) Boom 2 3 mm (12 in.) 230 mm (9 in.) Arm mm (11 in.) 200 mm (7.9 in.) Arm mm (11 in.) 2 mm (8 in.) Bucket mm (9 in.) 170 mm (7 in.) Bucket mm ( in.) 180 mm (7 in.) Dump mm (8.5 in.) 130 mm (5 in.) Level 1 3 mm (12 in.) 230 mm (9 in.) Hydraulic Filters All hydraulic circuits have high-quality hydraulic fi lters for longer life of hydraulic components and protection against oil contamination. Filters are centrally arranged for facilitated maintenance. Quantity Specifications Full-fl ow fi lter 3 µm High-pressure strainer (in main and swing-pump delivery line) 6 80 mesh Drain fi lter (for all plunger-type pumps and motors) 1 µm Bypass fi lter (in oil cooler bypass line) 1 5 µm Pilot fi lter 1 µm 3

4 EX SPECIFICATIONS CONTROLS Two Implement Levers Electric joystick-control levers: right lever for boom and bucket control; left lever for swing and arm control. For loading shovel, two pedals open and close bottom-dump bucket. Two Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks. UPPERSTRUCTURE Revolving Frame Deep, fully reinforced box section. Heavy-gauge steel plates for ruggedness. Deck Machinery Maintenance accessibility is the major feature in the layout of deck machinery. Sidewalks provide easy access to engine, hydraulic, and electrical components. ISO-compliant stairs and handrails. Sidewalks and stairs include skid-resistant plates. SWING MECHANISM 2 high-torque, axial-piston motors with 2-stage planetary gear bathed in oil. Swing circle with dirt seals features heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Spring-set/hydraulic-released disc-type parking brake is manually releasable. Swing speed 3.8 min -1 (rpm) OPERATOR S CAB Sturdy cab with OPG top guard level II (ISO) helps protect operator from falling objects. Independent, pressurized, 1800 mm (5 ft. 11 in.) wide, 2150 mm (7 ft. 1 in.) high, roomy 7.5 m³ (264.8 cu. ft.) cab with tinted-glass windows features all-round visibility. Air-suspension-type, fully adjustable reclining seat with armrests movable with or without front and swing control levers by slide. Instruments and control panel are within easy reach of operator. Three air-conditioner systems. Noise level 72 db(a) in the cab at maximum engine speed under no-load condition Eye-level height 6290 mm (20 ft. 8 in.) UNDERCARRIAGE Tracks Shovel-type undercarriage. Dual-fl anged-type bolt linkage for side frame and X-form center frame ensures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials for toughness. Lifetime-lubricated induction-hardened track rollers, idlers, and drive tumblers with fl oating seals. Opposed double-type upper rollers for easy removal of mud. Track shoes of induction-hardened cast steel with triple grousers. Specially heat-treated connection pins. Hydraulic track adjuster includes N2 gas accumulator with relief valve. Track adjuster protects against abnormal tension. Travel motion alarm device. Shovel-Type Undercarriage Triple grouser track shoes of induction-hardened cast steel. Shoe width 00 mm (39 in.) Numbers of Rollers and Shoes (each side) Upper rollers 3 Lower rollers 8 Track shoes 39 Travel Device Each track driven by high-torque, axial-piston motors, allowing counter rotation of tracks. 2-stage planetary gear plus spur-gear-reduction device. Dual-support-type traction device. Spring-set/hydraulic-released disc-type parking brake is manually releasable. Travel speeds High: km/h ( mph) Low: km/h (0.99 mph) Maximum traction force 1330 kn / kgf (298,944 lbf) Gradeability 58% (30-deg.) maximum WEIGHTS AND GROUND PRESSURE Loading Shovel: Equipped with 15.0-m 3 (19.6 cu. yd.) (SAE heaped) bottom-dump bucket. Shoe Type Shoe Width Operating Weight Ground Pressure Triple Grousers 00 mm (39 in.) kg (556,000 lb.) 183 kpa / 1.87 kgf/cm 2 (26.5 psi) Backhoe: Equipped with 8.7-m (28 ft. 7 in.) boom, 3.9-m (12 ft. in.) arm, and 17.0-m³ (22.2 cu. yd.) (SAE heaped) bucket. Shoe Type Shoe Width Operating Weight Ground Pressure Triple Grousers 00 mm (39 in.) kg (560,000 lb.) 185 kpa / 1.89 kgf/cm 2 (26.8 psi) 4

5 BACKHOE CONTROL LAYOUT Left Console Left Control Lever/Horn Switch 3. Left Travel Pedal Left Travel Lever 5. Right Travel Lever Right Travel Pedal Right Control Lever/Horn Switch Right Console 9. Operator's Seat 2 7. Bucket-Close Pedal (for loading shovel) 11. Bucket-Open Pedal (for loading shovel) 12. Pilot Control Shutoff Lever Rear Console 14. Emergency Engine-Stop Switch Engine Speed-Control Dial 16. Key Switch Monitor Display 13 SERVICE REFILL CAPACITIES Liters U.S. Gallons Imperial Gallons Fuel Tank , Engine Coolant Engine Oil Oil Pan Engine Oil Reserve Tank Pump Drive Swing Device (each side) 2 X 0 2 X 26 2 X 22.0 Travel Final Device (each side) 2 X X 36 2 X 30.1 Hydraulic System Hydraulic Tank DECK MACHINERY LAYOUT 1. Diesel Engine 2. Pump-Drive Unit 3. Hydraulic Pump X 6 4. Hydraulic Oil Cooling-Fan Motor 5. Hydraulic Oil Cooler 6. Engine Radiator 7. LTA Radiator 8. Fuel Cooler 9. Transmission Pump Oil Cooler. Engine-Pump Bulkhead 11. Control Valve X Swing Device X Center Joint 14. Hydraulic Tank 15. Fuel Tank 16. Battery Unit 17. Lubricator 18. High-Pressure Strainer X Reserve Tank (engine oil) 20. Reserve Tank (coolant) 21. Air Filter X 2 (outer/inner) 22. Muffl er 23. Fuel Filter (water separator) 24. Cab 25. Ladder 26. Folding Stairs 27. Ladder 5

6 EX SPECIFICATIONS LOADING SHOVEL ATTACHMENTS Boom and arm are of all-welded, low-stress, high-tensile-strength steel full-box section design. Effi cient, automatic level crowing achieved by one-lever control as parallel-link mechanism keeps bucket digging angle constant, and level-cylinder circuit maintains bucket height (auto-leveling crowd mechanism). Auto-lubrication system for all pins is standard. Feet Meter E H G E' EH F A C B Ground Line D Meter Feet WORKING RANGES BUCKET CAPACITY (HEAPED): 15.0 m³ (19.6 cu. yd.) A. Minimum digging distance 5340 mm (17 ft. 6 in.) B. Min. level crowding distance 7980 mm (26 ft. 2 in.) C. Level crowding distance 4980 mm (16 ft. 4 in.) D. Maximum digging reach mm (46 ft. 1 in.) E. Maximum cutting height 15 0 mm (49 ft. 3 in.) E'. Maximum dumping height 350 mm (34 ft.) F. Maximum digging depth 3720 mm (12 ft. 3 in.) G. Working radius at max. dumping height 8140 mm (26 ft. 9 in.) H. Maximum bucket opening width 2150 mm (7 ft. 1 in.) Arm crowding force 918 kn / kgf (206,351 lb.) Breakout force 943 kn / kgf (212,000 lb.) WORKING RANGES BUCKET CAPACITY (HEAPED): 16.5 m³ (21.6 cu. yd.) A. Minimum digging distance 5200 mm (17 ft. 1 in.) B. Minimum level crowding distance 8240 mm (27 ft.) C. Level crowding distance 4960 mm (16 ft. 3 in.) D. Maximum digging reach mm (46 ft. 11 in.) E. Maximum cutting height mm (50 ft.) E'. Maximum dumping height 350 mm (34 ft.) F. Maximum digging depth 3960 mm (13 ft.) G. Working radius at max. dumping height 8140 mm (26 ft. 9 in.) H. Maximum bucket opening width 2150 mm (7 ft. 1 in.) Arm crowding force 907 kn / kgf (203,926 lb.) Breakout force 873 kn / kgf (196,260 lb.) BUCKET (SAE HEAPED 2:1) Capacity Width Number of Teeth Weight Type Material Density 15.0 m³ (19.6 cu. yd.) 3590 mm (11 ft. 9 in.) kg (44,753 lb. ) Bottom-dump type, general purpose 1800 kg/m³ (3,033 lb./cu. yd.) 16.5 m³ (21.6 cu. yd.) 3590 mm (11 ft. 9 in.) kg (45,635 lb.) Bottom-dump type, general purpose 1600 kg/m³ (2,700 lb./cu. yd.) Note: These buckets do not include any type of wear protection for sides, bottom, and inside the bucket. Please consult your local Hitachi dealer for a proper wear-protection system for your application. Please do not use buckets without proper wear protection for your application. 6

7 EX SPECIFICATIONS BACKHOE ATTACHMENT Boom and arm are all-welded, low-stress, full-box section design. Bucket of all-welded high-strength steel structure. Bucket/arm joint pins are fl oating type. Replaceable thrust plates are provided with bucket/arm point part. Auto-lubrication system for all pins is standard. Feet Meter E C D 5 2 D' B F B' EH Ground Line Meter ' A' A G 5 0 Feet WORKING RANGES BE-boom length 8.7 m (28 ft. 7 in.) BE-arm length 3.9 m (12 ft. in.) A. Maximum digging reach mm (54 ft. 6 in.) A'. Maximum digging reach (on ground) mm (52 ft. 8 in.) B. Maximum digging depth 8250 mm (27 ft.1 in.) B'. Maximum digging depth (8' level) 8150 mm (26 ft. 9 in.) C. Maximum cutting height mm (51 ft. in.) D. Maximum dumping height 0 mm (33 ft. 2 in.) D'. Minimum dumping height 4250 mm (13 ft. 11 in.) E. Minimum swing radius 7990 mm (26 ft. 3 in.) F. Maximum vertical wall 41 mm (13 ft. 6 in.) G. Minimum level crowding distance 4900 mm (16 ft. 1 in.) Bucket digging force ISO 830 kn / kgf (186,509 lbf) SAE 760 kn / kgf (170,857 lbf) Arm crowd force ISO 785 kn / kgf (176,368 lbf) SAE 765 kn / kgf (171,959 lbf) BUCKET Capacity Width Number (SAE Heaped) Without Side Cutters of Teeth Weight Type Material Density 17.0 m 3 (22.2 cu. yd.) 3580 mm (11 ft. 9 in.) kg (34,392 lb.) General-purpose bucket 1800 kg/m³ (3,033 lb./cu. yd.) or less Note: These buckets do not include any type of wear protection for sides, bottom, and inside the bucket. Please consult your local Hitachi dealer for a proper wear-protection system for your application. Please do not use buckets without proper wear protection for your application. 7

8 EX SHIPPING INFORMATION EX components are designed for ease of transportation and on-site assembly. Components can be assembled without welding. UPPERSTRUCTURE Cab assembly Weight: 1740 kg (3,836 lb.) Cab bed Weight: 2560 kg (5,644 lb.) Sidewalk Weight: 71 kg (156.5 lb.) Sidewalk Weight: 74 kg (163 lb.) 2520 mm (8 ft. 3 in.) 2830 mm (9 ft. 3 in.) Width: 1880 mm (6 ft. 2 in.) 2920 mm (9 ft. 7 in.) 2820 mm (9 ft. 3 in.) Width: 1860 mm (6 ft. 1 in.) 1820 mm (6 ft.) 660 mm (26 in.) Width: 1290 mm (4 ft. 3 in.) 17 mm (5 ft. 7 in.) 480 mm (19 in.) Width: 1290 mm (4 ft. 3 in.) Sidewalk Weight: 77 kg (169.8 lb.) Weight: 65 kg (143.3 lb.) Mainframe assembly Weight: kg (83,333 lb.) 1820 mm (6 ft.) 7 mm (28 in.) 900 mm (35 in.) 40 mm (3 ft. 5 in.) 3520 mm (11 ft. 7 in.) Width: 1290 mm (4 ft. 3 in.) Width: 1290 mm (4 ft. 3 in.) 8200 mm (26 ft. 11 in.) Width: 3500 mm (11 ft. 6 in.) Fuel tank Weight: 2500 kg (5,511.5 lb.) 2930 mm (9 ft. 7 in.) Weight: 32 kg (70.5 lb.) 2040 mm (6 ft. 8 in.) Weight: 30 kg (66.13 lb.) 1880 mm (6 ft. 2 in.) 2780 mm (9 ft. 1 in.) 1230 mm (4 ft.) 1230 mm (4 ft.) Width: 1300 mm (4 ft. 3 in.) Width: 250 mm ( in.) Width: 140 mm (6 in.) 8

9 UPPERSTRUCTURE Weight: 9 kg (19.8 lb.) Weight: 615 kg (1,355.8 lb.) Box Weight: 977 kg (2,153.9 lb.) Bracket Weight: 20 kg (44.1 lb.) 660 mm (26 in.) 560 mm (22 in.) 880 mm (35 in.) 80 mm (3 ft. 7 in.) 1860 mm (6 ft. 1 in.) 1720 mm (5 ft. 8 in.) 1360 mm (4 ft. 6 in.) 350 mm (14 in.) Width: 30 mm (1 in.) Width: 70 mm (3 ft. 6 in.) Width: 870 mm (34 in.) Width: 260 mm ( in.) Weight: 22 kg (48.5 lb.) Weight: 23 kg (50.7 lb.) Folding stairs Weight: 773 kg (1,704 lb.) Weight: 150 kg (330.7 lb.) 460 mm (18 in.) 30 mm (3 ft. 5 in.) 30 mm (3 ft. 5 in.) 2430 mm (8 ft.) 2660 mm (8 ft. 9 in.) Width: 30 mm (3 ft. 5 in.) 1500 mm (4 ft. 11 in.) Width: 90 mm (4 in.) 3140 mm ( ft. 4 in.) Width: 10 mm (3 ft. 7 in.) 15 mm (4 ft. 11 in.) Width: 580 mm (23 in.) Fender Weight: 191 kg (421 lb.) Sidewalk Weight: 473 kg (1,043 lb.) Weight: 9 kg (19.8 lb.) Weight: kg (22 lb.) 2200 mm (7 ft. 3 in.) 1500 mm (4 ft. 11 in.) 1700 mm (5 ft. 7 in.) 2720 mm (8 ft. 11 in.) 15 mm (4 ft. 11 in.) 3 mm (12 in.) 440 mm (17 in.) 15 mm (4 ft. 11 in.) Width: 790 mm (31 in.) Width: 13 mm (4 ft. 4 in.) Width: 150 mm (6 in.) Width: 150 mm (6 in.) Weight: 34 kg (75 lb.) Ladder Weight: 20 kg (44.1 lb.) Weight: 37 kg (81.6 lb.) Weight: 41 kg (90.4 lb.) 1930 mm (6 ft. 4 in.) 650 mm (26 in.) 1230 mm (4 ft.) 940 mm (3 ft. 1 in.) 990 mm (3 ft. 3 in.) 1530 mm (5 ft. 2 in.) 1140 mm (3 ft. 9 in.) 600 mm (24 in.) Width: 5 mm (20 in.) Width: 2 mm (8 in.) Width: 260 mm ( in.) Width: 2 mm (8 in.) 9

10 UPPERSTRUCTURE Weight: 13 kg (28.7 lb.) Fender Weight: 13 kg (28.7 lb.) Weight: 27 kg (59.5 lb.) Weight: 27 kg (59.5 lb.) 700 mm (28 in.) 700 mm (28 in.) 2050 mm (6 ft. 9 in.) 2050 mm (6 ft. 9 in.) Width: 230 mm (9 in.) Sidewalk Weight: 333 kg (734 lb.) Sidewalk Weight: 214 kg (471.8 lb.) Sidewalk Weight: 123 kg (271.2 lb.) Hose reel Weight: 54 kg (119 lb.) 2640 mm (8 ft. 8 in.) 16 mm (5 ft. 3 in.) 1280 mm (4 ft. 2 in.) 780 mm (31 in.) Width: 10 mm (3 ft. 7 in.) Weight: 14 kg (30.9 lb.) Weight: 33 kg (72.6 lb.) Weight: 33 kg (72.6 lb.) Weight: 18 kg (39.7 lb.) 980 mm (3 ft. 3 in.) 2280 mm (7 ft. 6 in.) 26 mm (8 ft. 7 in.) 1240 mm (4 ft. 1 in.) Width: 55 mm (2 in.) Width: 55 mm (2 in.) Width: 270 mm (11 in.) Width: 230 mm (9 in.) Weight: 34 kg (75 lb.) Weight: 14 kg (30.9 lb.) Weight: 39 kg (86 lb.) Weight: 11 kg (24.3 lb.) 2560 mm (8 ft. 5 in.) 840 mm (33 in.) 740 mm (29 in.) 660 mm (26 in.) 670 mm (26 in.) 1940 mm (6 ft. 4 in.) 1700 mm (5 ft. 7 in.) 1700 mm (5 ft. 7 in.) 560 mm (22 in.) Width: 55 mm (2 in.) Width: 55 mm (2 in.) Width: 230 mm (9 in.) Width: 1120 mm (3 ft. 8 in.) Width: 850 mm (30 in.) Width: 270 mm (11 in.) Width: 1 mm (4 in.) Width: 230 mm (9 in.) Width: 2 mm (8 in.) Width: 55 mm (2 in.)

11 UPPERSTRUCTURE Weight: 12 kg (26.5 lb.) 680 mm (33 in.) Weight: 5 kg (11 lb.) Engine unit Weight: 18 0 kg (39,903 lb.) 830 mm (33 in.) 280 mm (11 in.) 3330 mm ( ft. 11 in.) Width: 1 mm (4 in.) Width: 2 mm (8 in.) 6130 mm (20 ft. 1 in.) Width: 2500 mm (8 ft. 2 in.) Door Weight: 26 kg (57.3 lb.) Door Weight: 26 kg (57.3 lb.) Air-cleaner assembly Weight: 3 kg (683.4 lb.) Muffler Weight: 570 kg (1,256.6 lb.) 590 mm (23 in.) 600 mm (24 in.) 1230 mm (4 ft.) 1860 mm (6 ft. 1 in.) 1600 mm (5 ft. 3 in.) 1600 mm (5 ft. 3 in.) 1230 mm (4 ft.) 1940 mm (6 ft. 4 in.) Width: 50 mm (2 in.) Width: 50 mm (2 in.) Width: 1260 mm (4 ft. 2 in.) Width: 1350 mm (4 ft. 5 in.) Weight: 140 kg (308.6 lb.) Fender Weight: 72 kg (158.7 lb.) Fender Weight: 86 kg (189.6 lb.) Reserve tank Weight: 150 kg (330.7 lb.) 13 mm (4 ft. 4 in.) 2850 mm (9 ft. 4 in.) 30 mm (3 ft. 5 in.) 1370 mm (4 ft. 6 in.) 30 mm (3 ft. 5 in.) 939 mm (3 ft. 1 in.) 1260 mm (4 ft. 2 in.) Width: 508 mm (20 in.) Counterweight Weight: kg (66,140 lb.) 60 mm (20 ft.) 1450 mm (4 ft. 9 in.) 1400 mm (4 ft. 7 in.) Width: 564 mm (22 in.) Width: 580 mm (23 in.) Width: 580 mm (23 in.) Width: 11 mm (3 ft. 8 in.) 11

12 UNDERCARRIAGE Track center-frame assembly Weight: kg (48,060 lb.) Track side-frame assembly Weight: kg (69,224 lb.) X 2 Weight: 8 kg (17.6 lb.) Ladder Weight: 13 kg (28.7 lb.) Motor cover stay Weight: 78 kg (172 lb.) 250 mm ( in.) 4 mm (16 in.) 490 mm (19 in.) Width: 200 mm (8 in.) Width: 603 mm (24 in.) Cover Weight: 96 kg (211.6 lb.) Cover Weight: 8 kg (238 lb.) 1250 mm (4 ft. 1 in.) 1170 mm (3 ft. in.) 150 mm (6 in.) 4000 mm (13 ft. 2 in.) Width: 9 mm (4 in.) Cover Weight: 87 kg (191.8 lb.) 1580 mm (5 ft. 2 in.) 2030 mm (6 ft. 8 in.) 5060 mm (16 ft. 7 in.) 8000 mm (26 ft. 3 in.) Width: 3300 mm ( ft. in.) Width: 2230 mm (7 ft. 4 in.) with travel device 1970 mm (6 ft. 6 in.) 1970 mm (6 ft. 6 in.) 1970 mm (6 ft. 6 in.) Width: 479 mm (19 in.) Width: 560 mm (22 in.) Width: 560 mm (22 in.) 12

13 LOADING SHOVEL ATTACHMENTS Bucket assembly Boom-arm assembly Weight: kg (63,933 lb.) B 3700 mm (12 ft. 2 in.) A mm (36 ft. 1 in.) Width: 2600 mm (8 ft. 6 in.) Bucket Capacity A B Max. Width Weight 15.0 m 3 (19.6 cu. yd.) 3440 mm (11 ft. 3 in.) 3240 mm ( ft. 8 in.) 3860 mm (12 ft. 8 in.) kg (44,753 lb.) 16.5 m 3 (21.6 cu. yd.) 3500 mm (11 ft. 6 in.) 3320 mm ( ft. 11 in.) 3860 mm (12 ft. 8 in.) kg (45,635 lb.) Bucket cylinder Weight: 1870 kg (4,122.6 lb.) X mm (14 ft. 4 in.) Width: 760 mm (30 in.) 520 mm (21 in.) Arm cylinder Weight: 2240 kg (4,938.3 lb.) 3900 mm (12 ft. in.) Width: 700 mm (28 in.) 580 mm (23 in.) Boom cylinder Weight: 2960 kg (6,393.3 lb.) X mm (16 ft. 1 in.) Width: 490 mm (19 in.) 630 mm (25 in.) 13

14 BACKHOE ATTACHMENTS Bucket assembly 3 Capacity (SAE heaped): 17.0 m (22.2 cu. yd.) Weight: kg (34,392 lb.) BE-boom assembly Weight: kg (54,012 lb.) 3620 mm (11 ft. 11 in.) 2870 mm (9 ft. 5 in.) 9280 mm (30 ft. 5 in.) Width: 2240 mm (7 ft. 4 in.) 3760 mm (12 ft. 4 in.) Width: 3600 mm (11 ft. in.) Boom cylinder Weight: 3120 kg (6,878 lb.) X 2 BE-arm assembly Weight: 16 0 kg (35,494 lb.) 670 mm (26 in.) 53 mm (17 ft. 5 in.) 4750 mm (15 ft. 7 in.) 25 mm (8 ft. 3 in.) Width: 490 mm (19 in.) Width: 1640 mm (5 ft. 5 in.) Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features. Before use, read and understand the Operator s Manual for proper operation. 14

15 Load Radius LIFTING CAPACITIES RATING OVER SIDE OR 360 DEGREES RATING OVER FRONT UNIT 00 KG (1,000 LB.) Load-Point Height Lifting Capacity Conditions BE-boom: 8.7 m (28 ft. 7 in.) BE-arm: 3.9 m (12 ft. in.) Bucket SAE: 17.0 m 3 (22.2 cu. yd.) Shoes: mm (39 in.) Load-Point Height m (32 ft. in.) 8 m (26 ft. 3 in.) 6 m (19 ft. 8 in.) 4 m (13 ft. 1 in.) 2 m (6 ft. 7 in.) 0 (Ground) 2 m ( 6 ft. 7 in.) 4 m ( 13 ft. 1 in.) LOAD RADIUS At Maximum Reach 6 m (19 ft. 6 in.) 8 m (26 ft. 3 in.) m (32 ft. in.) 12 m (39 ft. 4 in.) 14 m (45 ft. 11 in.) meter (ft. in.) *23.2 *23.2 *.3 * m (*51.1) (*51.1) (*22.7) (*22.7) (50 ft. 6 in.) *27.9 *27.9 *18.5 *18.5 *.1 * m (*61.5) (*61.5) (*40.8) (*40.8) (*22.3) (*22.3) (52 ft. 2 in.) *33.6 *33.6 *32.5 *32.5 *26.7 *26.7 *.3 * m (*74.1) (*74.1) (*71.6) (*71.6) (*58.9) (*58.9) (*22.7) (*22.7) (52 ft. in.) *51.1 * *39.5 * *11.1 * m (*112.7) (*112.7) (84.7) (*87.1) (*69.9) (61.3) (*24.5) (*24.5) (52 ft. 2 in.) 50.1 * *41.3 * *12.3 * m (1.4) (*112.7) (79.6) (*91) (*71.9) (58.2) (*27.1) (*27.1) (50 ft. 6 in.) 48.1 * *40.9 * *14.5 * m (6) (*8.7) (76.1) (*90.2) (*68.6) (56.2) (*32) (*32) (47 ft. 7 in.) *33.2 * * *37.2 *20.3 *20.3 (*73.2) (*73.2) (4.9) (*8.6) (74.7) (*82) (*44.8) (*44.8) *44.4 *44.4 *39.3 *39.3 *38.8 *38.8 *27.7 *27.7 (*97.9) (*97.9) (*86.6) (*86.6) (*85.5) (*85.5) (*61.1) (*61.1) Notes: *Indicates load limited by hydraulic capacity. 1. Ratings are based on SAE J Lifting capacity of the EX Series does not exceed 75% of tipping load with the machine on fi rm, level ground or 87% full hydraulic capacity. 3. The load point is a hook (not standard equipment) loaded on the back of the bucket. 15

16 OUR NAME LOOKS GOOD ON ORANGE. It s our color. It s our brand. New product-support initiatives and our strengthened dealer network is more proof that we are as passionate as ever about this industry. We are dedicated to building the best equipment in the world and keeping it painted Hitachi Orange. Specifications and design subject to change without notice. DKEX2600HT Litho in U.S.A. (11-)