1 of 38. Rexpower Sdn. Bhd. Gear pump with lift valves. Lift Valves. View more info :
|
|
|
- Frederick Cobb
- 5 years ago
- Views:
Transcription
1 Rexpower Sdn. Bhd. Gear pump with lift valves View more info : Lift Valves View More Info : 1 of 38
2 06 Series VPG. Double Pumps 2 of 38
3 3 of 38
4 RGP. RGPD. RGP-2A. Gear pumps SOl. Directional VALVE SOl. Directional VALVE SOl. Directional VALVE 4 of 38
5 SG. SVF. Prefill valves Steel SVF-32 Ductile iron SCF-32 SVF-50 SCF-50 SVF-63 SCF-63 SVF-80 SCF-80 SVF-100 SCF-100 SVF-125 SCF-125 SVF-160 n/a Size 2", 3", 3 1/2", 4", 5", 6", 8" Flow 1/min 160, 400, 600, 1000, 1600, 2500, 4000 View More at : SBG. SBSG. Low noise type relief valves No SBG-03, SBG-06, SBG-10, SBSG-03, SBSG-06, SBSG-10 Port PT 3/8, 3/4, 1 1/4, 3/8, 3/4, 1 1/4 Pressure adjusting range kg/cm2 1: 05 ~ 070 2: 35 ~ of 38
6 3: 70 ~ 250 Max. flow 1/min 100, 200, 400 RT. RCT. RG. RCG. Pressure reducing valves Subplate type Pressure reducing valve RG-03-**, RG-06-**, RG-10-** Pressure reducing valve with check RCG-03-**, RCG-06-**, RCG-10-** Thread type RT-03-*, RT-06-**, RT-10-** RCT-03-**, RCT-06-**, RCT-10-** Max. flow rate 1/min 40, 100, 200 Max. working pressure kg/cm2 210 Pressure adjust range kg/cm2 1 : 07 ~ : 25 ~ : 70 ~ 210 RFB. Back pressure valves Subplate type RFB-06, RFB-10 Port 3/4, 1 1/4 Max. flow rate 1/min 120, 250 Max. working pressure kg/cm of 38
7 Pressure adjust range kg/cm2 1 : 25 ~ : 35 ~ : 70 ~ 210 HT. HCT. HG. HCG H Series pressure control valves Subplate type H type pressure control valve HG-03-**, HG-06-**, HG-10-** HC type pressure control valve with check HCG-03-**, HCG-06-**, HCG-10-** Thread type HT-03-**, HT-06-**, HT-10-** HCT-03-**, HCT-06-**, HCT-10-** Max. flow rate 1/min 50, 125, 250 Max. working pressure kg/cm2 210 Pressure adjust range kg/cm2 1 : 08 ~ : 35 ~ : 70 ~ 140 DT. DG. Remote control relief valves No Subplate type DG-01, DG-02 Thread type DT-01, DT-02 Port PT 1/8, 1/4 Pressure adjusting range kg/cm2 7 of 38
8 10~250 1: 05 ~ 070 2: 35 ~140 3: 70 ~250 10~250 1: 05 ~ 070 2: 35 ~140 3: 70 ~250 Max. flow 1/min 2, 12 View More at : DA. DAW. Unloading relief valves Subplate type Unloading relief valve DA-03, DA-06, DA-10 Solenoid unloading relief valve DAW-03, DAW-06, DAW-10 Port 3/8, 3/4, 1 1/4, 3/8, 3/4, 1 1/4 Max. flow rate 1/min 40, 100, 250 Max. working pressure kg/cm2 210 Pressure adjust range kg/cm2 1 : 05 ~ : 35 ~ : 70 ~ 210 View More at : 8 of 38
9 BT. BG. Pilot operated relief valves No Subplate type BG-03, BG-06, BG-10, Thread type BT-04, BT-06, BT-10 Port PT 1/2, 3/4, 1 1/4, 1/2, 3/4, 1 1/4 Pressure adjusting range kg/cm2 1: 05 ~ 070 2: 35 ~ 140 3: 70 ~ 250 Max. flow 1/min 100, 180, 400, 100, 180, 400 View More at : BST. BSG. Solenoid controlled relief valves No Subplate type BSG-03, BSG-06, BSG-10 Thread type BST-06, BST-10 Port PT 3/8, 3/4, 1 1/4, 3/4, 1 1/4 Pressure adjusting range kg/cm2 1: 05 ~ of 38
10 2: 35 ~ 140 3: 70 ~ 250 Max. flow 1/min 100, 180, 400, 180, 400 View More at : rexpower.com/products2-1.html SRT. SRCT. SRG. SRCG. Throttle valves Subplate type SRG-03, SRG-06, SRG-10, SRCG-03, SRCG-06, SRCG-10 Thread type SRT-03, SRT-06, SRT-10, SRCT-03, SRCT-06, SRCT-10 Max. flow rated l/min 30, 80, 200, 30, 80, 200 Max. working pressure kg/cm2 210 FNC. FKC. FYC. FSC. MFS. SF. SDF. Deceleration valves One way controlled FNC-G02, FNC-G03, THF-G06, THF-G10 Mechanically (Cam / Roller) FKC-G02, FKC-G03, FYC-G02, FYC-G03 Solenoid operated FSC-G02, FSC-G03, SF-G06, SF-G10, SDF-G06, SDF-G10, SFD-G06, SFD-G10, SKF-G06, SKF-G10 Solenoid modular 10 of 38
11 MFS-02, MFS-03 Free flow l/min 20, 30, 120, , 30, 20, 30 20, 30, 120, , 50 Max. working pressure kg/cm2 70, 210 Adjusting flow l/min 0.01 ~ 8, 0.01 ~ 15, 0 ~ 120, 0 ~ ~ 8, 0.01 ~ 15 0 ~ 120, 0 ~ ~ 4, 0.01 ~ 8 View More at : VPG. Variable displacement vane pumps VPG-30/202, VPG-30/203, VPG-30/204, VPG-30/206 VPG-40/208, VPG-40/209, VPG-40/211, VPG-40/212 Lo-pump at 1800 r.p.m Pressure kg/cm2 70, 70 Flow l/min 30, 40 Hi-pump at 1800 r.p.m Pressure kg/cm2 210, 210, 175 Flow l/min 3.6, 5.4, 7.2, of 38
12 13.5, 16.2, 18.9, 21.6 View More at : VP. VPP. HVP. Variable displacement vane pumps VP-12, VP-15, VP-20, VP-30, VP-40, VPP-20/20, VPP-30/30, VPP-40/40 HVP-30, HVP-40 70, 140 Pressure adjusting range kg/cm2 A1:08 ~ 35 A2:30 ~ 70 A3:30 ~ 140 Drive speed (rpm) Max 1800 Min 800 Flow at 1800 r.p.m l/min 12, 15, 20, 30, 40, , , 30, 40 RGP-F1 SERIES GEAR PUMP - RGP-2A-F* *-R Gear Pump RGP Series Number 2A Nominal Discharge (ml/rev) 2~12 12 of 38
13 Rotation (from shaft side) R: clock wise L: anti-clock wise RGP-F1 SERIES GEAR PUMP - RGPD-F33- **/**-R**** Double Gear Pump RGPD Series Number F33 Nominal Discharge (ml/rev) shaft side / back side 4,6,8,10,12,14,16 18,20,23,25,28,30 Rotation (from shaft side) R: clock wise L: anti-clock wise Shaft Type Omit:ψ15.88 square key 19:ψ19.05 square key S*: SAE * spline Mounting Flange Omit: 2 bolt S: 4 bolt In / Outlet Port Omit: thread F: flange RGP-F1 SERIES GEAR PUMP - RGP-F** *-R****** Gear Pump RGP Series Number F2, F3, F4 Nominal Discharge 1.3~8, 4~30, 10~40 13 of 38
14 Rotation R: clock wise L: anti-clock wise Shaft type Omit: ψ12.7 square key A: ψ12 square key S * : SAE * spline Omit:ψ15.88 square key 19: ψ19.05 square key S * : SAE * spline Omit:ψ19.05 square key Mounting Flange Omit: 2 bolt S: 4 bolt In / Outlet Port Omit: thread F: flange RGP-F1 SERIES GEAR PUMP - RGP-F1 Gear Pump RGP Series number F1 Nominal Discharge (ml/rev) 0.6~8.0 Rotation (from shaft side) R: clock wise L: anti-clock wise Shaft type B: flat key Z: taper Inlet Position Omit: side A:back Outlet Position 14 of 38
15 Omit: side A: front RAB. RBB. Trochoidal pumps Series number RAB - 10A, 11A, 12A, 13A Nominal Discharge 1, 1.6, 2.5, 4 Y With relief valve Series number RBB - 2, 3, 4 Nominal Discharge 03~20, 08~40, 50~90 Y With relief valve OFA-01, OFA-02, OFB-02, OFC-02, OFC-03, OFD-04, OFD-06, OFE-04H, OFE-06H, OFF-06, OFF-08, OFG-06H, OFG-08H Size Inlet 1/4, 1/4, 1/4 1/4, 3/8, 1/2, 3/4 1/2, 3/4 3/4, 1, 3/4, 1 Outlet 1/8, 1/4, 1/4 1/4, 3/8, 1/2, 3/4 1/2, 3/4 3/4, 1, 3/4, 1 Remarks Use in Burner for Oil Boiler 15,000kcal Use in Burner for Oil Boiler 30,000kcal 15 of 38
16 Use in Burner for Oil Boiler 50,000kcal Use in Burner for Oil Boiler 50,000kcal(With handle) Use in Burner for Oil Boiler 100,000kcal Use in Burner for Oil Boiler 100,000kcal(With handle) PVR50. PV2R1. PV2R2. PV2R3. Fix displacement vane pumps PVR50-20, PVR50-23, PVR50-26, PVR50-30, PVR50-36 PV2R1-08, PV2R1-10, PV2R1-12, PV2R1-14, PV2R1-19, PV2R1-23, PV2R1-25, PV2R1-31, PV2R2-26, PV2R2-33, PV2R2-41, PV2R2-47, PV2R2-53, PV2R2-59, PV2R2-59, PV2R2-65, PV2R3-76, PV2R3-94, PV2R3-116 Flow cc/rev 16.6, 18.6, 22.2, 25.0, , 9.4, 12.2, 13.7, 18.6, 22.7, 25.3, 31.0, 25.8, 33.1, 41.3, 47.2, 52.5, 58.2, 64.7, 76.0, 93.6, Drive speed Max. 2000, 1800 Min. 800, 750, , 210, 160, 210, 160 GEAR PUMPS - HGP 16 of 38
17 HGP-1A-F1, HGP-1A-F2, HGP-1A-F3, HGP-1A-F4, HGP-1A-F5, HGP-1A-F6, HGP-1A-F8 HGP-2A-F2, HGP-2A-F3, HGP-2A-F4, HGP-2A-F6, HGP-2A-F8, HGP-2A-F9, HGP-2A-F11, HGP-2A-F12 HGP-3A-F6, HGP-3A-F8, HGP-3A-F11, HGP-3A-F13, HGP-3A-F14, HGP-3A-F17, HGP-3A-F19, HGP-3A-F23, HGP-3A-F25, HGP-3A-F28 Flow cc/rev 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, , 3.0, 4.0, 6.0, 7.5, 9.0,10.5, , 8.4, 11.0, 13.0, 14.3, 16.5, 19.2, 23.0, 25.0, 28.0 Speed drive Max. 4500, 4000, , 4500, 3500, , 2000, 3000 Min. 1000, 600, , 850, 800, 700, 600, 550, , 600, , 250, 210, 250, 175 Working pressure kg/cm2 210, 210, 175, 210, of 38
18 DS. Fix displacement vane pumps DS-12, DS-13, DS-14 Flow cc/rev 4.2, 7.0,12.2 Drive speed Max Min T Fix displacement vane pumps 50T-07, 50T-12, 50T-17, 50T-23, 50T-26, 50T-36, 50T-39, 150T-48, 150T-61, 150T-75, 150T-94, 150T-116 Flow cc/rev 6.8, 11.6, 16.5, 22.9, 25.9, 36.0, 38.8, 47.7, 61.1, 74.9, 93.6, Drive speed Max. 1800, 1200 Min View More at : 18 of 38
19 FLOW CONTROL VALVE - MTV MTV-02-P-*, MTV-02-T-*, MTV-03-P-*, MTV-03-T-* Valve size 02, Max. flow 1/min 40, 50 FLOW CONTROL VALVE - MTC MTC-02-W-*, MTC-02-A/B-*, MTC-03-W-*, MTC-03-A/B-* Valve size 02, Max. Flow 1/min 40, 50 Cracking pressure Kg/cm2 0.8 Remark * O: Meter-out I: Meter-in 19 of 38
20 SEQUENCE VALVE - MSV MSV-02-P-*, MSV-03-P-* Valve size 02, Max. flow 1/min 50, 80 Pressure adjusting Kg/cm2 1 : 08 ~ : 35 ~ : 35 ~ 210 MANIFOLD - MSP MSP-02-*, MSP-03-*, MSP-04-*, MSP-06-* Port size 3/8 PT, 1/2 PT, 3/4 PT, 1 PT RELIEF VALVE - MRV MRV-02-P-*, MRV-02-A/B-*, MRV-02-W-*, MRV-03-P-*, MRV-03-A/B-* Valve size 02, of 38
21 Flow rated 1/min 40, 50 Flow rated 1/min 1 : 08 ~ : 07 ~ : 35 ~ 250 PILOT CHECK VALVE - MPC MPC-02-W-* MPC-02-A/B-* MPC-03-W-* MPC-03-A/B-* Valve size 02, Flow rated 1/min 40, 50 Cracking pressure Kg/cm2 1 : 2 2 : 5 21 of 38
22 PRESSURE REDUCING VALVE - MGV MGV-02-P-*, MGV-02-A/B-*, MGV-03-P-*, MGV-03-A/B-* Valve size 02, Flow rated 1/min 40, 50 Pressure adjusting Kg/cm2 0 : 1.5 ~ 35 1 : 8 ~ 70 2 : 35 ~ 160 CHECK VALVE - MCV MCV-02-P-*, MCV-02-A/B-*, MCV-02-T-*, MCV-03-P-*, MCV-03-A/B-*, MCV-03-T-* Valve size 02, Flow rated 1/min 40, 50 Cracking pressure Kg/cm2 1 : : : of 38
23 COUNTERBALANCE VALVE - MCB MCB-02-A-*, MCB-02-B-*, MCB-03-A-*, MCB-03-B-* Valve size 02, Max. flow 1/min 40, 50 Pressure adjusting Kg/cm2 1 : 08 ~ : 35 ~ 140 BRAKE VALVE - MBV MBV-02-W-*, MBV-02-A/B-*, MBV-03-W-*, MRV-03-A/B-* Valve size 02, Flow rated 1/min 40, 50 Pressure adjusting Kg/cm2 1 : 08 ~ : 35 ~ 210 View More at : 23 of 38
24 Cartridge Valves Solenoid check valve is a two-ways solenoid valve with no leakage design. V2066, V3066, V2068, V3068, V6068, V2067, V3067, V6067, V2070 Coil D12 : DC12V D24 : DC24V A11 : AC110V A22 : AC220V A38 : AC380V Max Pressure Kg/cm2 210 Max flow 1/min 20, 40 (Specification - Cartridge type) 20, 40, 80 (Specification - Thread type) 20, 40, 80 (Specification - Subplate type) 25 (Specification - Thread type) Remark OMIT : Standard M : With Manual NC : Normally close NO : Normally open NG : DIN DL : Lead wires GEAR PUMP WITH LIFT VALVES - PR1 & PR2 PR1-020, PR1-030,,PR1-040, PR1-060, PR1-075, PR1-090, PR1-105, PR1-120, PR2-010, PR2-020, PR2-030, PR2-040, PR2-055, PR2-060, PR2-080 Displacement cc/rev 2, 3, 4, 6, 7.5, 9, 10,5, 12, 1, 2, 3, 4, 5, 6, of 38
25 Pressure kg/cm2 Working Max Speed rpm LIFT VALVES - LVS & KVS LVS-03TR (Thread type. Cast iron body), KVS-03TL / KVS-04TL (Thread type. Aluminum body), KVS-03M (Pump outlet mounting. Alum body) Max. Pressure kg/cm2 210 Max. flow rate 1/min 20, 20, 40, 20 CARTRIDGE VALVES - KV & KT & KL Check valve - KV-08, KV-10 Relief valve - KT-08, KT-10 Flow control valve - KL-08, KL-10 Max flow 1/min Check valve - 20, 40, Relief valve - 20, 40 Flow control valve - 20, 40 Max Pressure Kg/cm of 38
26 SUCTION STRAINER - W W-02S, W-02, W-03, W-04S, W-04, W-06, W-08, W-10, W-12, W-16, W-20, W-24, W-32 Size 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 4 Flow 1/min 12, 14, 17, 20, 30, 50, 100, 180, 246, 384, 700, 800, 1000 Filtration mesh 120 Air Breather SY-06S, SY-08, SY-08S Cutting hole mm 32, 50 Filtration mesh of 38
27 Throttle & Check valve PT-02, PT-03, PT-04, PT-06, PT-02N, PT-03N Size 1/4, 3/8, 1/2, 3/4, 1/4, 3/8 Material Steel 210 Pressure Gauge PGF-63A, PGF-100A, PGF-63B, PGF-100B, PGF-40D, PGD(L)-40A, PGD(L)-50A, PGD(L)-63A, PGD(L)-40D, PGD(L)-50D Size 1/4, 3/8 1/2, 1/4, 1/2, 1/8, 1/8, 1/8 1/4, 1/4, 1/8, 1/8 1/4 SG. SVF. Prefill valves Max. Flow 1/min Cracking Pressure kg/cm2 SG SG SG Max. Working Pressure kg/cm2 210 View More at : 27 of 38
28 CPDT. CPDG. Pilot operated check valves Subplate type Max. flow rated l/min CPDG CPDG CPDG Thread type CPDT CPDT CPDT Max. working pressure kg/cm2 210 View More at : CIT. CRG. CRNG. Check valves Thread type Max. flow l/min CIT-03-* 40 CIT-04-* 60 CIT-06-* 100 CIT-08-* 150 CIT-10-* 200 CIT-12-* 280 CIT-16-* 400 Subplate type CRG-03-* 40 CRG-06-* 125 CRG-010-* Cracking pressure kg/cm2 OMIT:0.5 5:5 View More at :- 28 of 38
29 rexpower.com/cit.html Cooler OR-60L, OR-100L, OR-150L, OR-250L, OR-350L, OR-600L, OR-800L, OR-1000L, OR-1200L Exchange tube 22, 26, 42, 58 Flow 1/min 60, 100, 150, 250, 350, 600, 800, 1000, 1200 SUPER FLEXIBLE COUPLINGS - NM NM-50, NM-67, NM-82, NM-97, NM-112, NM-128, NM-148, NM-168, NM-194, NM-214, NM-240, NM-265 Torque Min. kg-m 1.3, 2.2, 5.0, 10.5, 16.7, 26.7, 41.7, 69.5, 112.0, 167.0, 267.0, Max. kg-m 2.3, 4.0, 9.0, 19.0, 30.0, 48.0, 75.0, 125.0, 200.0, 300.0, 480.0, Max. speed rpm 13500, 10000, 8000, 7000, 6000, 5000, 4500, 4000, 3500, 3000, 2750, 2500 Bore diam. Min. 7, 9, 10, 12, 14, 18, 22, 28, 32, 45, 60, 70 Max. 19, 28, 32, 42, 48, 55, 65, 75, 85, 95, 110, 120 Suction Strainer 29 of 38
30 N-04, N-06, N-08, N-10, N-12, N-16, N-20, N-24 Size 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3 Flow 1/min 35, 46, 90, 150, 205, 320, 550, 600 Filtration mesh 150 SUCTION STRAINER - MF MF-02, MF-03, MF-04, MF-06, MF-08, MF-10, MF-12, MF-16, MF-20, MF-24, MF-32 Size 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 4 Flow 1/min 20, 24, 32, 56, 110, 210, 285, 395, 750, 800, 1000 Filtration mesh 100 Level Indicators LS-3, LS-5, GS-3, GS-5, OA-3, OA-5 OA-200, OA-300, OA-400, OA-500 Size M10, M12, 3/8, M10, M12 30 of 38
31 Pressure swith JCS-02N, JCS-02NL, JCS-02NLL Working pressure kg/cm2 30 ~ 210, 15 ~ 60, 05 ~ , 70 Current:AC250V, 3A Differential pressure: within 5% of Max. pressure Coupling 31 of 38
32 HT-4012, HT-4016, HT-5016, HT-5018, HT-6018, HT-6022, HT-8018, HT-8022, HT-10020, HT-12018,HT Bore diam. Min. 11, 15, 19, 22, 23, 30, 35, 48, 58 Max. 22, 30, 40, 45, 55, 75, 78, 95, 110, 120, 150 Stop valve & Gauge cock GCT-02, GCT-03, GCT-04, GCT-06, GCT-08 Size 1/4, 3/8, 1/2, 3/4, 1 Flow 1/min 3, 21, 30, 100, DNM MODULAR TYPE - DNM DNM, 02, 03, P/A/B/W, 040K, 100K, 250K Pressure Adj. Range kg/cm2 6 ~ 40, 15 ~ 100, 40 ~ 250 Max. working Pressure kg/cm2 200, 350, of 38
33 DNL SUBPLATE MOUTING - DNL DNL-050K, DNL-100K, DNL-200K, DNL-280K, DNL-280K, DNL-280K, DNL-400K Pressure Adj. Range kg/cm2 6~50, 15~100, 30~200, 40~280, 50~400 Max. working Pressure kg/cm2 200, 300, 300, 350, 400 DNF PANEL MOUNTING - DNF DNF-040K, DNF-100K, DNF-250K, DNF-360K Pressure Adj. Range kg/cm2 6~40, 15~100, 40~250, 50~360 Max. working Pressure kg/cm2 200, 350, 400 DNB COMPACT THREAD TYPE - DNB DNB-040K, DNB-070K, DNB-150K, DNB-250K Pressure Adj. Range kg/cm2 6~40, 5~70, 30~150, 40~250 Max. working Pressure kg/cm2 150, 200, 300, 300 DNA STANDARD THREAD TYPE - DNA DNA-040K, DNA-100K, DNA-250K, DNA-360K 33 of 38
34 Pressure Adj. Range kg/cm2 6~40, 15~100, 40~250, 50~360 Max. working Pressure kg/cm2 150, 250, 300, 400 Tank Cleaning Cover CR-10, CR-12, CR-14, CR-18 Tank hole 8, 10, 12, 16 Dust seal for piping CN-02, CN-03, CN-04 ST-03, ST-04, ST-06, ST-08, ST-10, ST-12, ST-16, ST-20, ST-24 Dia inch 1/4, 3/8, 1/2 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3 Usage Tube Pipe 34 of 38
35 Spin-on Return Filter CF-06, CF- 06G,CF-10 PT 3/4, 3/4, 1 1/4 Flow 1/min 60, 60, 144 Mounted 60, 60, 144 GAUGE COCK - AL & GCT AL-02, AL- 02(90 ), GCT-02 Size 1/4 Flow 1/min 3 210, 350 DMT. DMG. DRT. Manually operated directional valves Level type thread connection Max. Flow 1/min DMT-03-** 100 DMT-04-** 250 DMT-06-** 300 DMT-10-** Level type thread connection Max. Flow 1/min 35 of 38
36 DMG-02-** DMG-03-** DMG-06-** Spool 3C2 3C3 3C4 3C6 3D2 3D3 3D4 3D6 View More at : AIR BREATHER CAP - AB AB-06, AB-08, AB-16, AB-20, AB-32 PT 3/4, 1, 2, 2 1/2, 4 Filtration mesh 40 DCG. Mechanically operated directional valves Series Number DCG Size 02 Spool Type 2B2 2B3 2B8 Max. flow rate l/min of 38
37 250 Max. back pressure kg/cm2 100 View More at : SWDH. Solenoid operated hydraylic pilot directional valves Size 04G, 06G, 10G Coil Voltage A24:AC240V, 60HZ/AC220V, 50HZ Pilot Omit: For standard internal pilot. P: External pilot. Drain Omit: For standard internal Drain. D: External drain. Wiring Omit: Terminal box. D: DIN plug-in. View More at :- SHD-11 Solenoid operated directional valves Size 02G, 03G Coil Voltage A20:AC220V/50Hz 220V/60Hz A22:AC220V/50Hz 240V/60Hz A24:AC240V/50HZ A10:AC100V/50Hz 110V/60Hz A11:AC110V/50Hz 120V/60Hz D12:DC12V D24:DC24V R11:AC110V/60HZ R22:AC220V/60HZ 37 of 38
38 Wiring Omit:Terminal box with indicating D:DIN plug connector View More at :- SHD Solenoid operated directional valves Size 02G, 03G Coil Voltage A11:AC100V/50Hz 110V/60Hz A12:AC110V/50Hz 120V/60Hz A22:AC200V/50Hz 220V/60Hz A24:AC220V/50HZ 240V/60Hz D12:DC12V D24:DC24V R11:AC110V (Rectifier inside) R22:AC220V (Rectifier inside) Wiring Omit:Terminal box with indicating lamp. D:DIN plug-in connector View More at:- Rexpower Sdn. Bhd. No. 109, Jalan BP 6/3, Bandar Bukit Puchong, 47120, Puchong, Selangor, Malaysia Tel Fax Website Website 38 of 38
Model (kg) CIT CRG-06 CIT : CIT CRG-10 CIT : CIT CIT
check valve OUT IN RG - 06-5 1 3 1 RG: Sub-plate mounting IT: Thread connection Valve size 03: 3/8" 04: 1/" 06: 3/4" 08: 1" 10: 1-1/4" 1: 1-1/" 16: " 3 racking pressure (bar) 5: 0.5 50: 5 Rated Flow Max.
Pilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
Directional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
Pol Ind Les Comes C/Alemania, 43 Nave Igualada (Barcelona) Telf Fax
A B I N A Table of Content REMOTE CONTROL RELIEF VALVE... 1-1 DIRECT TYPE RELIEF VALVE... 1-3 SUBPLATE... 1-6 PILOT OPERATED RELIEF VALVE... 1-7 SUBPLATE...1-11 LOW NOISE TYPE PILOT OPERATED RELIEF VALVE...1-13
Modular Throttle Valve MST MT MTC MCT Solenoid Operated Throttle Valve Throttle Valve Throttle and Check Valve Counter Restrictors Valve
Modular Throttle MST MT MTC MCT Solenoid Operated Throttle Throttle Throttle and Check Counter Restrictors Modular Relief MGS MBR MCB MRB MSV MRV Two Section Reducing Reducing Counter Balance Balance Sequence
FLOW CONTROLS. Maximum Flow U.S.GPM Maximum Operating Pressure MPa (PSI) Graphic Symbols. Page. Valve Type.
FLOW CONTROLS Valve Type Graphic Symbols Maximum Operating Pressure MPa (PSI) Maximum Flow U.S.GPM 5 5 5 5 5 5 5 Page Flow Control Valves (5) 77 Flow Control and Check Valves (5) 77 Pilot Operated Flow
Solumatics Engineering (M) Sdn. Bhd. Water Solenoid Valve. Steam Solenoid Valve. 1 of 32
Solumatics Engineering (M) Sdn. Bhd. Water Solenoid Valve Steam Solenoid Valve 1 of 32 Stainless Steel Solenoid Valve Stainless Steel Flange End Solenoid Valve 2 of 32 Solenoid Pilot Operated Valve For
Chapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
VINCKE HYDRAULIC PUMPS
: VNK BA10VS 21 Variable displacement axial piston pump of swashplate design for hydraulic open circuit systems. Flow is proportional to drive speed and displacement. It can be infinitely varied by adjustment
magnaloy coupling company 501 Commerce Drive Alpena, MI Effective Oct 7, 2013 Subject to change upon notice
LIST PRICES Effective Oct 7, 2013 Subject to change upon notice Flexible Drive Couplings PM 90 Couplings Pump/Motor Mounts Hydraulic Manifolds & Manifold Accessories Reservoirs Reservoir Accessories Rod
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
DIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 CONTENTS: RH06...1 - electrical control... RH06...2 - hydraulic control... Page 1/17...7/17 8/17...9/17 RH06...4 - mechanical control RH06...6 - pneumatic control......
HYDRAULICS VINCKE INDUSTRIAL HYDRAULIC VALVES
VINCKE INDUSTRIAL HYDRAULIC VALVES TECH-VIHV-200.1 index 3 link to your page / link a su página 4VNKSV Directional on/off control 4 3 CETOP 3 3 CETOP 5 7 10 4VNKEH Electro-hydraulic directional control
Pressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
VALVES RANGE FOR OPEN LOOPS T E C H N I C A L C A T A L O G
VALVES RANGE FOR OPEN LOOPS T E C H N I C A L C A T A L O G Valves range for open loop 2 18/07/2017 Valves range for open loop CONTENT CHECK VALVES 5 Direct operated valves 7 Pilot operated valves 11 Counterbalance
DIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 GENERAL DESCRIPTION RH0...1-...F... Document: DCVC3-1-Aug 2013 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction RH0...1-...F...
TPV 4000 (EX 28-41) Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE TRANSMISSION LINE OF HANSA-TMP HT 16 / M / 280 / 1008 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
Subplates (AP) and multi-station subplates
Subplates and multi-station subplates Type AP700/RP700/ EP700 to 25 l/min Features Subplates (AP) and multi-station subplates (RP) with threaded connections End plate (EP) Compact design up to six stations
2.3 MEDIUM HEAVY DUTY SERIES
2 2.3 MEDIUM HEAVY DUTY SERIES CONTENTS PPV11 Ordering Code 2.3.1 Medium Heavy Duty Series 2.3.2 Torque limiter settings Technical Information 2.3.3 Specifications 2.3.4 Hydraulic fluids 2.3.5 Viscosity
HYDRAULIC GEAR PUMP JP 10/20/30 SERIES
www.joyang.net CE Certified KSA 9001 ISO 9001 Certified www.joyang.net JP 10/20/30 SERIES We will do our best to meet customers need through higher technology and excellent quality. JOYANG HYDROTECH CO.,
Vent Connection. Pres. Adj. Range BT BG * ~ BG F- B T -03 P -V -32.
These valves protect the hydraulic system from excessive pressure, and can e used to maintain constant pressure in a hydraulic system. Remote control and unloading are permitted y vent circuit. PRESSURE
TPV Variable Displacement Closed Loop System Axial Piston Pump MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 403 / 1110 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
TPV Variable Displacement Axial Piston Pumps CONTENTS. General Information. Installation Instructions. Technical Specifications 6-7
CONTENTS General Information Installation Instructions Technical Specifications Single Pump Installation Drawing Tandem Pump Installation Drawing Mounting Flanges and Shaft Details Rear Pump Mounting Flanges
INSTALLATION DIMENSIONS
ACCESSORIES & OTHERS PRESURE GAGE INSTALLATION DIMENSIONS UNIT mm(inch) LM TYPE CBM TYPE CBM-F TYPE MODEL B B1 D D1 D2 G H T d R G40LM 28.1(0.86) φ48(1.9) φ41.7(1.6) 8(0.31) 58.7(2.31) 1/8" G40CBM 26(1.02)
Modular Valves. Ratings
High Pressure, High Flow Rate Features Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly
Vickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
Hydraulic Power Packs
Hydraulic Power Packs Hydraulic Pump / Hydraulic Valve / Hydraulic Accessory ISO 9001:2008/ISO 14001:2004 283 Danforth Avenue, Suite 348, Toronto, ON Canada M4K 1N2 www.lprglobal.com / www.uskoreahotlink.com
S.A. 193 Stefan Cel Mare str., 2400 Sibiu -Romania
S.A. H rd 193 Stefan Cel Mare str., 2400 Sibiu -Romania 1 240 l/min 315 bar Pressure control valves NG10,20,32 FC -9 GENERALITIES Pilot operated pressure control valves, available with/without by-pass
Symbol RH F... GENERAL DESCRIPTION. 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction
GENERAL DESCRIPTION List: RH06-1F-1-July 016 4/3- and 4/- way directional control valves with solenoid operation, heavy duty construction Removable AC and DC voltage coils-quick replacement and rotation
directional lever control valves
directional lever control valves directional lever control valves Directional Lever Control Valves Directional Control Valves - Monoblock Directional Control Valves - Sectional Directional Control Valves
Variable displacement axial piston pumps,
LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar
TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
Coolers. OK Series. Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF Cooling Systems Catalog. Applications
OK Series Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF 3-11 OKA 4-6 OKAF 4-6 OKA 8-11 OKAF 8-11 Description The OK Series cooler design uses a axial fan assembly which draws air through the cooler.
PRODUCT INFORMATION FAQ s
PRODUCT INFORMATION FAQ s Directional Control Valves General....... Page 2 Directional Control Valves Electric....... Page 4 Directional Control Valves Options....... Page 6 Directional Control Valves
HYDRAULIC VALVES TARGET HYDRAUTECH PVT. LTD. THPL DIRECTIONAL CONTROL VALVES PRESSURE CONTROL VALVES
YUCI YUKEN HYDRAULICS CO.,LTD. HYDRAULIC VALVES DIRECTIONAL CONTROL VALVES Directional control valves can be used for controlling direction of oil low so as to operate start up, stop and moving direction
PIPELINE INJECTION PRODUCTS
PIPELINE INJECTION PRODUCTS DURABLE & RELIABLE SOLUTIONS PIPELINE INJECTION PUMP GP-10 & GP-1 SERIES Flows up to: 210 GPM / BPH / 7,20 BPD (nominal flow) BUSHINGS BACK PULL OUT SEAL HEAD DRIVER SHAFT DRIVEN
RE 91808/ AA4VSE Plug-in dual displacement motor. High pressure range. Series 10 Axial piston swashplate design, SAE model
AA4VSE Plug-in dual displacement motor Series Axial piston swashplate design, SAE model RE 91808/09.90 RE 91808/09.90 Brueninghaus Hydromatik Size 250 Nominal pressure 350 bar Peak pressure 400 bar High
Mobile Hydraulic Pumps T6G, T67G, T6ZC. Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6G, T67G, T6ZC Denison Vane Technology, fixed displacement aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing
Note: For use with hydraulic fluids other than those listed above, please consult Yuken representative in advance.
PRESSURE CONTROLS Fluid Types Any type of hydraulic fluids listed in the table below can be used Petroleum base oil Synthetic Fluids Water Containing Fluids Use equivalent to ISO VG32 or VG46. Use phosphate
FGMDLPG-1 Flow Meter FGMDLPG-1 flow meter is made by cast Aluminum, small size, light weight, used in Liquid Gas Dispenser. Max 5~60L Discharge rate per revolution : 0.5L/r Adjustable Minimum Volume: 0.001
V Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
Replacement Elements
Pressure Elements Used in OFS Series, OFCS & OFCD Series, OFAS & OFAD Series, OF5HS & OF5HD Series, and OFX Skid - Standard Capacity Series 9 inch Elements 18 inch Elements 27 inch Elements Part No. Part
MT SERIES COUNTER FLOW COOLING TOWER
MT SERIES COUNTER FLOW COOLING TOWER Environment Friendly Power Safe High Performance Compact Genius Cooling Towers Sdn Bhd N. 35-2, 35-3, Jalan Puteri 4/1, Bandar Puteri, 47100 Puchong, Selangor, Malaysia.
Sectional Directional Control Valve RS 220
Sectional Directional Control Valve RS 0 RS 0 is a sectional open center valve designed for max. operating pressures up to 00 bar and max. pump flows up to 0 l/min. Technical data Pressure and flow values*
LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS
Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating
Chapter 5: Flow Valves
Contents Chapter 5: Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 0 10 1 Subplate Screw-in Throttle valves, manual adjustment MVI 5-3 NS 5-5 FS With free
HY-SPEC CATALOGUE - HYDRAULIC VALVES. Hydraulic Valves. Visit our website Catalogue
HY-SPEC CATALOGUE - HYDRAULIC VALVES Hydraulic Valves Catalogue Visit our website HY-SPEC PRODUCT FAMILY HY-SPEC CATALOGUE - AC/DC POWER PACKS HY-SPEC CATALOGUE - GAS ENGINE PRODUCTS Accessories AC/DC
» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC HW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
Pre-Fabricated Flushing Bypass Assembly for Plant Applications Hero Plant DN15-150
Pre-Fabricated Flushing Bypass Assembly for Plant Applications Description Hero Plant is a pre-fabricated, flushing bypass arrangement for balance, control, isolation, and operation of plant devices. Flow
SR1A-A2. Functional Description HA /2012. Directly Operated Pressure Relief Valves. Replaces HA /2010. Screw-in cartridge design
Directly Operated Pressure Relief Valves SRA-A2 HA 5063 7/202 3/4-6 UNF p max 350 bar (5080 PSI) Q max 30 L/min (7.9 GPM) Replaces HA 5063 8/200 Screw-in cartridge design 4 pressure ranges Pressure setting
Power Units and Valves
Power Units and Valves Page Power Units Valves, Mounting Kits & Manifolds Worksheet Features Gear Pump Vane Pump With Manifolds With D03 Manifolds Power Unit Matrix D03 Valves D03 Accessory Valves D03
«Standard» Hydraulic power unit BM
«Standard» Hydraulic power unit BM Tank volume V max = 25 l Flow rate Q max = 25,5 l/min Motor power P max = 3 kw CONTENT CHARACTERISTICS...1 DESCRIPTION...1 FUNCTION...1 ENERGY EFFICIENCY...1 KEY DATA
Hydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit
Introduction *not included Pump with standard compensator, code: "omit" With thru shaft option for multiple pump options Swash plate type for open circuit Pump with load sensing, code: "A" Mounting style
Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69
V Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,
Heavy Duty Hydrostatic Transmissions
Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck
3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow A-VRFC3C-VEI-VS-LS 0M.43.21.80 - Y - Z RE 18309-63 Edition: 03.2018 Replaces: 03.2016 Technical
2011 AC & DC Hydraulic. Power Packs Compact. Rotation Ø 15 6,45 3,5 5,7
Ø 15 6,45 5,7 3,5 11 9 ±. C & DC Hydraulic Rotation ower acks Compact OWER CKS COMCT series ordering code C11/1-1 QUICK SELECTION GUIDE C & DC electric motors DC motors,15 1DC_T 1VDC motor - 15W - Ø 8
BIROTATIONAL POWER PACK
HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide FEATURES / BENEFITS Reduces wiring, leak paths and eliminates directional valves resulting in lower overall system
IFP MPC(D)03 PILOT CHECK VALVE MODULE
IFP MPC(D)03 PILOT CHECK MODULE ISO4401-03 SIZE/NFPA D03 STEEL SEAT FOR LONG WEAR ZERO LEAKAGE DECOMPRESSION FEATURE C:\wliu\MPC.bmp MPC-03-W MPC-03-A MPC-03-B MPC (D) - 03 - W - 1 MODULAR CHECK DECOMPRESSION
36EFC. Series & EFC Valve Package
Engineering & Manufacturing Solutions Specifications: Rated for 0-24 gpm (0-91 lpm) depending on Series 36-38 work sections used. Pressure rating 3000 psi (207 bar). 10 Micron filtration recommended. See
HYDRAULICS VINCKE HYDRAULIC PUMPS
VINCKE HYDRAULIC PUMPS TECH-VHP200.1 index 3 link to your page / link a su página Gear pumps Introduction 3 Group 0 3 Group 1 3 Group 2 3 Group 3 4 6 7 12 18 Variable displacement pumps 21 Hand pumps 3
Catalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA
Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.
TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
PVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS
PVX-11 VANE PUMPS VARIABLE DISPLACEMENT, COMPENSATED NOTE: See pages thru 14 for PVX-11 dimensions. PERFORMANCE SPECIFICATIONS Displacement (Nominal) 1.5 in 3 /rev. (25 cm 3 /rev.) Displacement (Actual)
BS3... SINGLE STATION SUBPLATE
3... SINGLE STATION SUBPLATE 301... (blanking) CETOP 3 SUBPLATES 301... / 30*... CAP. VII 310/11... / 312/13... 314/15... / 316/1... CAP. VII 8 320/21... / VMP10... 3W... CAP. VII 9 325/2... / 330/32...
Directional Controls
Vickers Directional Controls Wet Armature Solenoid Operated Directional Control Valves Model DGV-, Series Typical Construction of a Spring-Centered DC Valve with Variable Speed Pilot Control passage Speed
Unloading relief valve: KPR-10/...P... 10/19 Relief reducing valve:
PRESSURE VALVES CONTENTS: Page Relief valves: RV06-2A...... 1/19 RV08-2A...... 2/19 RV22-2A...... 3/19 KPZ10/...... 4/19 KP-70/...... 5/19 KP60/...... 6/19 RM80-...... 7/19 Relief valve-prefill type: KPP...10/......8/19&9/19
Modular Unit 6MB HYDRANOR MODULAR UNIT 6MB GENERAL DESCRIPTION. 6MB-200-**-2C General Arrangement. Rev
MODULAR UNIT 6MB GENERAL DESCRIPTION Figure 1 6MB-200-**-2C General Arrangement Rev. 5 5.1.1 Figure 2 General Arrangement 6MB-650-**-2C The Modular Units 6 MB is a complete unit for controlling of hydraulically
Pilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
Pressure Compensator Valves Series R5P (SAE Flange Mounted) General Description. Features
Technical Information General Description Series R5P direct operated, 3-way pressure compensators can be combined with any type of fixed or adjustable flow resistor (throttle) to provide a load compensated
TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 114 / 0814 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.
END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,
Hydraulic gear pumps and motors
PL 01 T E DISPLACEMENTS From To Hydraulic gear pumps and motors 0.07 in 3 /rev (1.07 cm 3 /rev) 5.56 in 3 /rev (91.10 cm 3 /rev) through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.
Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
Pilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
TPVT 1200 BTB. Variable Displacement Axial Piston Pumps CONTENTS. General Information. Installation Instructions. Technical Specifications 6-7
CONTENTS General Information Installation Instructions Technical Specifications Tandem Pump Installation Drawings Hydraulic Diagrams Rear Pump Mounting Flanges Mounting Shaft and Shaft Details Control
TPV 1000 (Ex 6-18) Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 109 / 1008 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
Specification. Bore No.
MVSD-180 Series Specification Bore No. Medium Operating perssure range Operating pressue () External pilot pressure () Proof pressure Effective orifice Ambient temperature Reponse time Weight E1 E 4E1
Variable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
p max 350 bar Q max 50 l/min bar bar 50 Ports dimensions: P - port (pressure) T - port (drainage) T - port (drainage) A/B - port l/min
52 000/103 ED This series of modular subplates has been designed to make hydraulic circuits and can be used directly on power packs or on any other section of the machine. The subplates are assembled by
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic
HP3V SERIES. Swash-plate Type Axial Piston Variable Displacement Pump
1 /32 HP3V SERIES Swash-plate Type Axial Piston Variable Displacement Pump Hengli swash-plate axial piston pump HP3V, the key parts of the pump are made of imported materials, quality strictly controlled,
ACCESSORIES CONTENTS. HYDRAULIC DISC BRAKE for MP, MR and MS type LB/
ESSORIES ONTENTS age HYDRULI DIS RKE for M, MR and MS type L/288... 3 HYDRULI DIS RKE for MSS type LS/289(290) and MSV type LV/289(290)... 6 HYDRULI DIS RKE for MTS type LS/314(315) and MTV type LV/314(315)...
ISD SO-NB-G105 SO-NB-G85 SO-NB-P46 PV2R1-* - * -RAA-42/4290 PV2R2-* - * -RAA-41/4190 PV2R3-* - * -RAA-31/3190 PV2R4-* - * -RAA-30/3090
Spare Parts List PVR-* - * -RAA-4/4 PVR-* - * -RAA-4/4 PVR-* - * -RAA-/ PVR4-* - * -RAA-/ 4 5 4 6 8 8 6 5 4 Y Section Y-Y Y 6 5 Section - 8 Cartridge Kits Model Numbers PVR-6- * -RAA-4 * PVR-8- * -RAA-4
Directional Control Valve Series 4D01 (DENISON)
Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift
Available manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
Full Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
List of Parts for Screw Compressor VMY 347 H and VMY 347 M Model 1994
00.08 List of Parts for Screw Compressor VMY 347 H and VMY 347 M Model 994 Relevant drawing: 0664-700 Unless otherwise stated, all measurements are in mm.) Pos. Designation Qty per comp. H M Used w/pos.
Series 90 Axial Piston Motors. Technical Information
Series 90 Axial Piston Motors Technical Information HISTORY OF REVISIONS Table of Revisions Date Page Changed Rev. Fourth edition 2 520L0604 Contents GENERAL DESCRIPTION Cross section Cross section Cross
P2060 P2075 P2105 P2145 P3105 P3145
Technical Information Technical Features P2 Series Compact design Low noise level Service friendly Reliable Long-lasting Flexible Easy to install High self-priming speed Technical Data P3 Series P2 Series
3PC Directional Control Valves
3PC Directional Control Valves Count on the hydraulics expert Caterpillar has been designing hydraulic components and systems for more than 5 years. Our rugged, dependable components make progress possible
6 to14/2 ways/positions bankable flow diverters flangeable
6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/07.12 Replaces: 12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F) Size 10 Series 00 Maximum operating pressure 310 bar [4500
V*L Pressure control valves in line
V*P / V*L... V*P... cap. II 7 V*PE... cap. II 8 V*L... cap. II 9 - Cap. II 10 BSVMP... cap. II 11 KEC16/5... cap. II 9 C*P16/5... cap. II 9 CETOP 3/NG06 cap. II 8 Standard spools for AD3E Cap. II 10 AD3E...
Ports. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact:
Solenoid operated EEx d IIC T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves,
Pilot-Operated Pressure Relief Valve Series RM
Characteristics Pilot-Operated Relief alve The pilot-operated pressure relief valves from the Parker Manapak series RM are sandwich plate valves designed for stacking beneath a directional valve with a
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
Pump SCP / SCPT 090,130 DIN, SAE
3118 GB Pump SCP 012-108 / SCPT 090,130 DIN, SAE Sunfab SCP and SCPT are range of piston pumps of a bent axis design with fixed displacement for demanding mobile hydraulics. It covers the whole displacement
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2018 Replaces: 03.2016 Technical data Description