DIRECTIONAL CONTROL VALVES CETOP3
|
|
- Liliana Summers
- 5 years ago
- Views:
Transcription
1 DIRECTIONAL CONTROL VALVES CETOP3
2 GENERAL DESCRIPTION RH F... Document: DCVC3-1-Aug /3- and 4/2- way directional control valves with solenoid operation, heavy duty construction RH F... Removable AC and DC voltage coils-quick replacement and rotation in any directions without leakage from the system Wet pin core tubes connect to tank with high pressure capacity Manual override option (push button) Maximum control of hydraulic power Reliability and long life Mounting surface CETOP3 (NG) Symbol a P T b a P T The RH F... valves are solenoid operated directional spool valves. They used to control the start, stop and direction of flow. The RH F... valves consist of a spool, housing, springs and solenoids. This model is designed with two-spring centered spool for 4/3- and 4/2- valves. The housing has 5-chambers. The operating solenoids are DC type. For AC supply the solenoids are provided with rectifier, which is integrated into the installation ground of the connectors. Standard supply voltages are 12V DC, 24V DC, 48V DC, 110V AC(RAC) and 220V AC(RAC). Electrical connectors conform to DIN standard. In case of problem with the electric supply, an option for manual override is provided. 1/17
3 Connector DIRECTIONAL CONTROL VALVES-CETOP 3 GENERAL DESCRIPTION Spring RH F... Solenoid T P a A B b Spool Housing ORDERING CODE Directional control valve Nominal size Functional symbol see page 3/17 Type of control: RH /... F -electrical Supply voltage/current frequency see page 7/17 Modification Connector see page 7/17 012/00 024/00 048/00 110/50 220/50 C1 C2 C3 C4 C5 Orifice in P line Omit - without orifice K1 - orifice 0,8mm. K2 - orifice 1mm. K3 - orifice 1,2mm. K4 - orifice 1,5mm. K5 - orifice 2mm. see page 5/17 Screw cap Omit -with plastic cap M -with metal cap see page 5/17 Spacers Omit -without spacers S -With spacers see page 5/17 N T - normal - tropical 2/17
4 RH F... FUNCTIONAL SYMBOLS DESIG- NATION SYMBOL INTERMEDIATE Type of control DESIG- NATION SYMBOL INTERMEDIATE Type of control a P T b * 70 20* * * Symbols 19, 20 and 82 are with detent. Both switched positions are alternately fixed and there is no need to energize the solenoid continually. For three positional valves ( code 7-manually) the operator is at side a axcept symbols 42, 1 and 2, which operator is at side b. For two positional valves see the table above. Other symbols on request. 3/17
5 RH F... TECHNICAL DATA DATA Installation position UNIT VALUE/RANGE GENERAL optional except symb. 08, 19, 20 and 82 -horizontal o Max. ambient temperature C Weight single solenoid valve kg 1,00 double solenoid valve kg 2,200 Max. pressure port P, A & B MPa 32 port T MPa 1 HYDRAULIC Rated flow (at Dp 0,1MPa.) l/min Max. flow (depend of symbol-see page /17) l/min 80 Hydraulic fluid-mineral oil: -viscosity 2 mm /s filtration degree mm temperature o C Cyclic duration % 100 ELECTRICAL Waterproof Heat insolation IP5 H Type of voltage DC AC Available voltage /frequency 12/00 110/50(0) V/Hz 24/00 220/50(0) 48/00 Voltage tolerance % ± 10 Current consumption 12VDC 2,4 24VDC 1,3 48VDC A 0,58 110V RAC 0, 5 220V RAC 0, 25 Max. switching frequencies cycle/h Switching time at p=17,5mpa, on ms 50 Q=40l/min (measured for off ms 25 control valve symbol 01 ) 4/17
6 RH F... DIMENSIONS All dimensions are shown in mm. 4x 5,5 Gray or white plug connectors for solenoid a, black connectors for solenoid b and transparent for solenoids with light indicator. For one-lead supply scheme, the metal screw cap should be used see ORDERING CODE - code M a , ,8 40,5,75 1,3 2, 32,5 b Use orifice in P line when inlet flow exceeds the operating limit of valve from CHARACTERISTICS see ORDERING CODE - code K... Standard fixing bolts M5x30 (10,9 class recommended). Torque...8 Nm. In case of modular mounting spacers are available in order - see ORDERING CODE - code S. 4x ,5 a 22 b /100 2,5 with solenoid a for symbol: 11, 12, 14, 17, 24, 27, 33, 34, 39, 45, 8, 70 and 83 with solenoid b for symbols: 10, 13, 1, 28, 32, 3, 4 and 78 S=24 a b 14 The other dimensions are the same as double solenoid valve. 5/17
7 CHARACTERISTICS RH F... Dp/Q Dp[MPa] Dp/Q-curves 2, , , Q[l/min] SYMBOL CURVE P>A P>B A>T B>T P>T (mid./end) 2/ CURVE SYMBOL P>A P>B A>T B>T P>T p/q The operating limit of hydraulic power shown here is for applications with two directions of flow (e.g. from P to B and simultaneously from A to T). If the valve is with one direction passage only (e.g. from P to B and with blocked port A), the operating limit may considerably be o reduced. The performance limits are measured with hydraulic oil 35 ±5 cst, temperature 50 C and supply voltage 0,9U N P[MPa] Q[l/min] , P[MPa] 35 1,2& Q[l/min] ,17 &18 SYMBOL CURVE SYMBOL CURVE /17
8 RH F... the rectifier is build-in here at AC type SOLENOIDS connector surfacetype of connection DIN43 50 AC & DC All dimensions are shown in mm. rectifier scheme ~ ~ UIN AC 220/50(0) or 110/50(0) RC manual override ~ _ = UOUT DC 195/00 or 98/00 + AC and DC solenoids have one and the same dimensions, connections and characteristics. The difference between AC and DC solenoids is in the integrated rectifier into the AC type - see rectifier scheme. The solenoids can be used for 50Hz and 0Hz. The supply voltages are as follows: 12V DC, 24V DC, 48V DC, 110V AC/50(0)Hz and 220V AC/50(0)Hz. CODE/TYPE CONNECTORS C1 C2 (for DC type) C3 (for DC type) C4 (for AC type) C5 (for AC type) Without connector Pg 11 With standard connector - DIN Connector with light indicator (transparent) Connector with integrated RC filter Connector with light indicator and RC filter (transparent) SEALS O ring 23x1.5 O ring 12.5x1.8 O ring 38x1 O ring 1x2.5 O ring 9x1.8 (4x) 7/17
9 4/3- and 4/2- way directional control valves with hydraulic operation Reliability and long life Mounting surface CETOP3 (NG) DIRECTIONAL CONTROL VALVES-CETOP 3 GENERAL DESCRIPTION RH0...2F... RH0...2F... The RH0...2F... valves consist of a spool, housing, springs and hydraulic control unit. They used to control the start, stop and direction of flow. The valves are used for hydraulic power control. This model is designed with two-spring centered spool about 4/3- and 4/2- valves. The housing has 5-chambers. The valve location during assembly is of minor importance, but the horizontal position is generally recommended. For functional symbols 08, 19, 20 and 82, the horizontal position is obligatory. ORDERING CODE Symbol a P T a P T b Directional control valve Nominal size RH 0 Functional symbol see page 3/17 Type of control Modification * Only for type of control-7 ** Only for type of control-2 & hydraulic - mechanical - pneumatic - manual F N T - normal - tropical Omit - without detent D - with detent Spacers Omit-Without spacers S-with spacers see page 5/17 M - M14x1,5 G - G1/4 Connection threads** see page 9/17,13/17 Backing of the housing Detent* FUNCTIONAL SYMBOLS See page 3/17. DATA TECHNICAL DATA UNIT VALUE/RANGE Weight -three positional kg 2,2 -two positional 1, Max. Pressure port P, A & B 32 port T MPa 1 Rated flow (at Dp=0,1MPa.) l/min Pilot pressure 1...1,5+P -P min T -P max MPa 21 PT - pressure in T chanal 8/17
10 RH0...2F... CHARACTERISTICS See page /18 DIMENSIONS All dimensions are shown in mm ,75 4x 5, ,8 40,5 10,3 18 4,75 1,3 2, 32,5 Symbols 00, 01, 02, 04, 05, 0, 08, 18, 19, 20, 21, 2, 40, 41, 42, 52, 1, 2, 82, 98, 99 Pilot M14x1,5 or G1/4 M14x1,5 or G1/4 Pilot 1 Symbols 11, 12, 14, 17, 24, 27, 33, 34, 39, 45, 8, 70, 83 Symbols 10, 13, 1, 28, 32, 3, 4, 78 Pilot Pilot 128,5 S=24 SEALS O ring 2.5x2.5 O ring 9x1.8 (4x) O ring 1x2.5 9/17
11 RH0...4F... GENERAL DESCRIPTION 4/2- way directional control valves with mechanical operation RH0...4F... Reliability and long life Mounting surface CETOP3 (NG) These RH0...4F... valves consist of a spool, housing, springs and mechanical control unit. They used to control the start, stop and direction of flow. The valves are used for hydraulic power control. This model is designed with two-spring centered spool. The housing has 5-chambers and vertical T duct. The valve location during assembly is of minor importance, but the horizontal position is generally recommended. Symbol a P T ORDERING CODE See page 8/17. FUNCTIONAL SYMBOLS See page 3/17. DATA TECHNICAL DATA UNIT VALUE/RANGE Weight kg 1,420 Max. Pressure port P, A & B 32 port T MPa 1 Rated flow (at Dp=0,1MPa.) l/min Actuating force -F min 30 -F max N 130 See page /17 CHARACTERISTICS 10/17
12 RH0...4F... DIMENSIONS All dimensions are shown in mm ,75 4x 5,5 4 10, ,8 40,5,75 1,3 2, 32,5 Symbols 12, 17, 24, 27, 34, 39, 45, 8, 70, 83 Symbols 10, 13, 1, 28, 32, 3, 4, ,5 134,5 S=24 SEALS O ring 2.5x2.5 O ring 9x1.8 (4x) O ring 1x2.5 11/17
13 RH0...F... GENERAL DESCRIPTION 4/3- and 4/2- way directional control valves with pneumatic operation RH0...F... Reliability and long life Mounting surface CETOP3 (NG) The RH0...F... valves consist of a spool, housing, springs and pneumatic control unit. They used to control the start, stop and direction of flow. This model is designed with two-spring centered spool about 4/3- and 4/2- valves. The housing has 5-chambers. The valve location during assembly is of minor importance, but the horizontal position is generally recommended. For functional symbols 08, 19, 20 and 82, the horizontal position is obligatory. Symbol a P T a P T b See page 8/17. ORDERING CODE See page 3/17. FUNCTIONAL SYMBOLS TECHNICAL DATA DATA UNIT VALUE/RANGE Weight -three positional kg 1,950 -two positional 1,450 Max. Pressure port P, A & B 32 port T MPa 1 Rated flow (at Dp=0,1MPa) l/min Pilot pressure -P min 0, 2 -P max MPa 1 See page /17 CHARACTERISTICS 12/17
14 4 DIRECTIONAL CONTROL VALVES-CETOP 3 RH0...F... DIMENSIONS All dimensions are shown in mm ,75 4x 5,5 10, ,8 40,5,75 1,3 2, 32,5 Symbols 00, 01, 02, 04, 05, 0, 08, 18, 19, 20, 21, 2, 40, 41, 42, 52, 1, 2, 82, 98, 99 Pilot M14x1,5 or G1/4 M14x1,5 or G1/4 Pilot 179 Symbols 11, 12, 14, 17, 24, 27, 33, 34, 39, 45, 8, 70, 83 Symbols 10, 13, 1, 28, 32, 3, 4, 78 Pilot Pilot 135 S=24 SEALS O ring 2.5x2.5 O ring 9x1.8 (4x) O ring 1x2.5 13/17
15 RH0...7F... 4/3- and 4/2- way directional control valves with manual operation Reliability and long life Mounting surface CETOP3 (NG) GENERAL DESCRIPTION RH0...7F... Symbol a P T b The RH0...7F... valves consist of a spool, housing, springs and manual control unit. They used to control the start, stop and direction of flow. This model is designed with two-spring centered spool about 4/3- and 4/2- valves. The housing has 5-chambers. There are two possible versions of valve - with detent and without detent. The valve location during assembly is of minor importance, but the horizontal position is generally recommended. a P T ORDERING CODE See page 8/17. FUNCTIONAL SYMBOLS See page 3/17. TECHNICAL DATA DATA UNIT VALUE/RANGE Weight kg 2,2 Max. pressure port P, A & B 32 port T MPa 1 Rated flow (at Dp=0,1MPa) l/min o Lever angular movement ±32 Actuating force N 30 See page /17 CHARACTERISTICS 14/17
16 RH0...7F... DIMENSIONS All dimensions are shown in mm. 74 THREE POSITIONAL 22 Symbols 00, 01, 02, 04, 05, 0, 11, 12, 14, 17, 18, 21, 24, 2, 27, 34, 39, 40, 41, 45, 52, 8, 70, 83, 98, 99(except 42, 1,2) 31 0,75 4x 5,5 4 10, ,8 40,5,75 1,3 2, 32, TWO POSITIONAL Symbols 10, 13, 1, 28, 32, 33, 3, 4, 78 ~223 S=24 For three positional valves symbols 42, 1 and 2 the operator is at side b. SEALS O ring 23x2.5 O ring 1x2.5 O ring 9x1.8 (4x) 15/17
17 AUTOMATIC SWITCH DIRECTIONAL CONTROL VALVE GENERAL DESCRIPTION DVAS0-20 Flow automatically revers direction from P-A to P-B when the setting value of pressure relief valves is reached. 4/2- way directional control valves with hydraulic pilot operation Manual override option Reliability and long life Mounting surface CETOP3 (NG) Symbol ORDERING CODE DVAS Automatic switch directional control valve Nominal size Pressure range: Omit- V bar bar. Direction of flow(symbol 20) 1/17
18 AUTOMATIC SWITCH DIRECTIONAL CONTROL VALVE DVAS0-20 TECHNICAL DATA DATA Installation position UNIT VALUE/RANGE GENERAL preferably horizontal o Max. ambient temperature C Weight kg 1,400 Max. pressure MPa 21 Maximum flow l/min 30 Minimum flow l/min 4 HYDRAULIC Hydraulic fluid - mineral oil: -viscosity 2 mm /s filtration degree mm temperature o C CHARACTERISTICS Dp/Q A(B) to T P to A(B) p(bar) 8 p(bar) Q(l/min) Q(l/min) 17/17
DIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 CONTENTS: RH06...1 - electrical control... RH06...2 - hydraulic control... Page 1/17...7/17 8/17...9/17 RH06...4 - mechanical control RH06...6 - pneumatic control......
Symbol RH F... GENERAL DESCRIPTION. 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction
GENERAL DESCRIPTION List: RH06-1F-1-July 016 4/3- and 4/- way directional control valves with solenoid operation, heavy duty construction Removable AC and DC voltage coils-quick replacement and rotation
Directional Control Valve Series 4D01 (DENISON)
Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift
Directional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
Directional Control Valve Series D3W (Parker), 4D02 (Denison)
Characteristics Series D3W (Parker), 4D0 (Denison) The direct operated directional control valve size NG10 is available with both Parker (series D3W) and Denison (series 4D0) model codes. Both series are
Pilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
Pilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
Directional Control Valve Series D1VW
Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. A wide variety of spool options
Directional Control Valve
Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. wide variety of spool options allows
Pilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW
Characteristics The pilot operated valves are available in 4 sizes: D31DW NG10 (standard) D31NW NG10 (high flow) D41VW NG16 D81VW NG5 (for port diameter up to 6 mm) D91VW NG5 (for port diameter up to 3
Pilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
Introduction. Pressure drops
Directional control valves CETOP 5/NG0 Introduction The ARON directional control valves NG0 designed for subplate mounting with an interface in accordance with UNI ISO 440-05 - 04-0 - 94 standard (ex CETOP
Pilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
MONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
4/3, 4/2 and 3/2 Directional Valve with Wet-pin AC or DC Solenoid
01/08 /3, /2 and 3/2 Directional Valve with Wet-pin AC or DC Solenoid 2.1 Type WE 10...L5X Size (NG) 10 Up to 350 bar Up to 150 L/min Contents Function and configurations -03 Specifications 0 Symbols 05
EV FT3 ES-FT5 ES/GB :09 Pagina 4 FT3 ES* 4
EV FT3 ES-FT5 ES/GB 4 15-07-2008 16:09 Pagina 4 5 1 HOW TO READ THE MODEL CODE FOR VALVES FT3 - ES - * FT3 - ES - (1) (C) - * - (024C) / 10 2 FUNCTIONAL SYMBOLS 1C 1N 1 2 3 4 5 6 7 1 FT3 4-way directional
DIRECTIONAL CONTROL VALVES CETOP 3/NG6
CETOP 3/NG06 STANDARD SPOOLS CH. I PAGE 0 AD.3.E... CH. I PAGE AD.3.E...J* CH. I PAGE 2 AD3.XS... CH. I PAGE 3 AD3.XD... CH. I PAGE 4 AD.3.V... CH. I PAGE 5 AD.3.L... CH. I PAGE 6 OTHER OPERATOR CH. I
General Specifications DRV DRV-Exm DRV-Exd
direct operated, 3-way pressure reducing valve Q max = 8 l/min pressure range = - 5 bar body stainless steel (optional) Description The proportional pressure reducing valve (3-way function) is used to
Chapter 2: Directional Control Valves
Contents Chapter : Directional Control Valves Series Description Direct operated Pilot operated Page DIN / ISO 06 10 16 5 3 10 16 5 3 Seat valves, electrically operated D1SE - Spool valves, electrically
Cartridge Valves Technical Information Directional Valves DCV 03
OVERVIEW DCV 03 directional control valves consist of: housing (1), control spool (5), with two centering springs (4), and cylindrical operating solenoids (2, 3). The three-position directional valves
3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
Directional Control Valves, electrically operated Type WE 5 Huade América 1
Directional Control Valves, electrically operated Type WE 5 Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Directional control valves, electrically operated Type WE 5 Size5 up to 25
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
D4D SOLENOID OPERATED DIRECTIONAL CONTROL VALVES DIRECT CURRENT - SERIES 50 ALTERNATING CURRENT - SERIES 60
41 300/198 ED D4D SOLENOID OPERATED DIRECTIONAL CONTROL VALVES DIRECT CURRENT - SERIES 0 ALTERNATING CURRENT - SERIES 60 CETOP 0 p max 30 bar Q max 100 l/min MOUNTING INTERFACE DIRECT-ACTING SOLENOID OPERATED
S.A. 193 Stefan Cel Mare str., 2400 Sibiu -Romania
S.A. H rd 193 Stefan Cel Mare str., 2400 Sibiu -Romania 1 240 l/min 315 bar Pressure control valves NG10,20,32 FC -9 GENERALITIES Pilot operated pressure control valves, available with/without by-pass
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
DIRECTIONAL CONTROL VALVE SOLENOID OPERATED TYPE HD3-ES-*-/10 CETOP MPa HD3 - ES - (1) (C) - * - (024C) (-) / 10
table HD-0/ (07/0) DIRECTIONAL CONTROL VALVE SOLENOID OPERATED TYPE HD-ES-*-/0 CETOP 0-5 MPa /5 HOW TO READ THE MODEL CODE FOR HD-ES - Pressure 5 MPa (50 bar) HD - ES - () (C) - * - (0C) (-) / 0 5 6 7
Pilot-Operated Proportional DC Valve Series D*1FH
Characteristics The pilot-operated proportional DC valves series of the D*1FH series are high-performance valves with electronic spool position feedback. These valves are available in sizes NG10 to NG2
RNEH4-25. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2012
4/2 and 4/3 Way Directional Control Valves Pilot Operated RNEH4-25 HA 4024 7/2015 Size 25 (D 08) 320 bar (4600 PSI) 600 L/min (159 GPM) Replaces HA 4024 6/2012 Solenoid pilot operated directional valves
Directional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
RPEH4-16. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2002
4/2 and 4/3 Way Directional Control Valves Pilot Operated RPEH4-16 HA 4023 2/2003 Size 16 p max up to 320 bar Q max up to 300 L/min Replaces HA 4023 2/2002 Solenoid pilot operated directional valves (RPEH)
Chapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
Solenoid directional valves type DPHI and DPHE two stage, ISO 4401 size 10, 16, 25 and 32
www.atos.com Table E0857/E Solenoid directional valves type DPHI and DPHE two stage, ISO 4401 size 10, 16, 25 and 32 DPHE471*/H Spool type, two stage directional valves with solenoids certified according
4/3-4/2 Directional valve elements LF1_1 (LC1F-Z)
4/3-4/2 Directional valve elements LF1_1 LC1F-Z) RE 18305-01 Edition: 02.2016 Replaces: 07.12 07.2012 Size 6 Series 00 Maximum operating pressure 310 bar 4500 psi) Maximum flow 35 l/min 9.25 gpm) Ports
NG6. Proportional adjustment. Manifold mounting acc. to ISO External drain. Main stage spool type valve. Pilot stage seated type valve.
Catalog HY14-255/US Technical Information Series VY*K General Description Series VY*K pilot operated sequence valves feature proportional adjustment and an external drain. The external drain allows application
Directional Controls
Vickers Directional Controls Wet Armature Solenoid Operated Directional Control Valves Model DGV-, Series Typical Construction of a Spring-Centered DC Valve with Variable Speed Pilot Control passage Speed
INSTALLATION DIMENSIONS
ACCESSORIES & OTHERS PRESURE GAGE INSTALLATION DIMENSIONS UNIT mm(inch) LM TYPE CBM TYPE CBM-F TYPE MODEL B B1 D D1 D2 G H T d R G40LM 28.1(0.86) φ48(1.9) φ41.7(1.6) 8(0.31) 58.7(2.31) 1/8" G40CBM 26(1.02)
Stand alone 4/3, 4/2 direct acting directional valve LF2_1 (LC2F-DZ)
Stand alone 4/3, 4/2 direct acting directional valve LF2_1 (LC2F-DZ) RE 18305-03 Edition: 02.2016 Replaces: 07.12 07.2012 Size 10 Series 00 Maximum operating pressure 250 bar (3600 psi) Maximum flow 90
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
p max (see table of performances) Q max (see table of performances) bar Maximum flow rate from port P to A - B - T l/min
41 400/117 ED E*P4 PILOT OPERATED DISTRIBUTOR SOLENOID OR HYDRAULIC (C*P4) CONTROLLED E4P4 CETOP P05 E4R4 ISO 4401-05 E5 ISO 4401-08 p max (see table of performances) Q max (see table of performances)
Q max 300 l/min. Fluid temperature range C Fluid viscosity range cst Recommended viscosity cst 25
41 420/103 ED DSP7 PILOT OPERATED DISTRIBUTOR SOLENOID OR HYDRAULIC(DSC7) CONTROLLED SERIES 10 CETOP 07 p max (see performance ratings table) Q max 300 l/min MOUNTING INTERFACE CETOP 4.2-4-07-320 The DSP7
-Technical data... 2/14 -Circuit mode... 2/14 -Dimensions RP /14
Auxiliary valves Document: SCV-1-June 2013 Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 2/14 -Circuit mode... 2/14 -Dimensions... 3/14 -Dimensions... 4/14 -Lever mechanism...
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.
/ and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with
BW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
Available manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
Solenoid directional valves type DPHI, DPHU
www.atos.com Table E0805/E Solenoid directional valves type, two stage, ISO 4401 size 10, 16, 25 and 32 37**/HM..... and are spool type, two or three position directional two stage solenoid valves designed
Publ. 3-EN 2950-A. DENISON HYDRAULICS Pressure Relief Valve R6V
Publ. 3-EN 2950-A DENISON HYDRAULICS Pressure Relief Valve R6V FEATURES, SYMBOL FEATURES High Performance: R6V valves are designed for a maximum pressure of 350 bar and a flow capacity up to 650 l/min.
4/3-4/2 Proportional directional valves L5080 solenoid (LC04P) operated (for open loop control) L5080 (LC04P)
/ - / Proportional directional valves L solenoid (LCP) operated (for open loop control) L (LCP) RE - Edition:. Replaces: 7. 7. Size Series Maximum operating pressure bar ( psi) Maximum flow l/min (.7 gpm)
RPEW4-10. Functional Description HA /2012. Solenoid Operated Directional Control Valves with Wirebox. Replaces HA /2006
Solenoid Operated Directional Control Valves with Wirebox RPEW-10 5/2012 Size 10 (D 05) 350 bar (5076 PSI) 10 L/min (37 GPM ) Replaces 2/2006 /3, /2 way directional control valves Four-land spool - reduced
SOLENOID DIRECTIONAL VALVE
SOLENOID DIRECTIONAL VALVE type DHE direct operated, high performances, ISO 4401 dimensione 06 Spool type, two or three position direct operated valves with high performance threaded solenoids certified
DIRECTIONAL CONTROL VALVES CETOP 5/NG10
CETOP 5/NG0 STANDARD SPOOLS CH. I PAGE 30 AD.5.E... CH. I PAGE 3 AD.5.E...J* CH. I PAGE 32 AD.5.E...Q5 CH. I PAGE 32 AD.5.O... CH. I PAGE 33 AD.5.D... CH. I PAGE 33 AD.5.L... CH. I PAGE 34 A6 DC SOLENOID
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi)
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi) Revised 2/93 GB C 2037 Table of Contents Model Code...................................................................................................
Seated valves. Type WV700 NG 6 ISO up to 25 l/min, up to 700 bar. Features. Applications. Design. Technical data
Seated valves Type WV700 Features Direct operated Leakage free (double tight) High operational safety and reliable switching High duty cycles and long lifetime Applications Control of cylinders and motors
Remote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
VINCKE INDUSTRIAL HYDRAULIC VALVES INTRODUCTION
INTRODUCTION 4 Introduction Hydraulic valves, in addition to the force density advantage of actuators, are what help make hydraulics unique in their control of force, torque and motion. Valves govern direction,
Pilot Operated Proportional DC Valve Series D*1FW / D*1FT
Characteristics The D*1FW / D*1FT pilot-operated proportional DC valves are available in NG10 (CETOP5), NG16 (CETOP7) and NG25 (CETOP8). These valves (D*1FW) are controlled electrically with the external
DL /118 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO p max 280 bar Q max 50 l/min
41 211/118 ED DL3 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-03 p max 280 bar Q max 50 l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
Proportional cartridge throttle valve, with inductive position transducer, pilot operated
Proportional cartridge throttle valve, with inductive position transducer, pilot operated RE 29215/09.05 1/18 Type FESX Nominal size 16, 25, 32, 40, 50 Unit series 1X Maximum working pressure A, B, X 315
4/3, 4/2 proportional directional valves solenoid operated (for open loop control)
/, / proportional directional valves solenoid operated (for open loop control) RE -/7. Replaces: RE7/.7 / Type L (LCP) Size Series Maximum operating pressure bar [ psi] Nominal flow rated l/min [.7 gpm]
HYDRAULICS VINCKE INDUSTRIAL HYDRAULIC VALVES
VINCKE INDUSTRIAL HYDRAULIC VALVES TECH-VIHV-200.1 index 3 link to your page / link a su página 4VNKSV Directional on/off control 4 3 CETOP 3 3 CETOP 5 7 10 4VNKEH Electro-hydraulic directional control
Type of operation Depending on requirement either one or two dry DC-solenoid,
Features Leakage free High availability 100% duty cycle Porting NG 6 according to DIN 24340 Positive overlap Function and design The seated valves are direct operated. Depending on the desired control
Seated valve 500 Type WVM-4B NG 4 up to 12 l/min
Seated valve 500 Type WVM-4B Features Direct operated Leakage free Good resistance to corrosion As 2/2-, 3/2-, 3/3-, 4/2-* or 4/3-valve with solenoid or alternative actuation * pilot-operated Design With
Ports. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact:
Solenoid operated EEx d IIC T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves,
RPE2-04. Functional Description HA /2002. Solenoid Operated Directional Valves. Replaces HA /2000
Solenoid Operated Directional Valves RPE2-04 HA 4012 3/2002 Size 04 p max up to 320 bar Q max up to 20 l/min Replaces HA 4012 6/2000 Special model - special installation dimensions 4/3-, 4/2- and 3/2-way
4/3 proportional directional control valve, without position control, with on-board electronics (OBE)
4/3 proportional directional control valve, without position control, with on-board electronics (OBE) Type 4WRBAE..E.. /..W.. Nominal size (NG) 6, 10 Unit series 2X Maximum working pressure P, A, B 315
RPEW4-06. Functional Description HA /2005. Solenoid Operated Directional Control Valves with Wirebox 1/2 NPT 1/2 NPT. Replaces HA /2004
Solenoid Operated Directional Control Valves with Wirebox RPEW4-06 2/2005 Size 06 p max up to 320 bar Q max up to 80 L/min Replaces 2/2004 4/3, 4/2 way directional control valves Four-land spool - reduced
Chapter 7: Sandwich Valves
Contents Chapter : Sandwich Valves Series Description Size Page DIN / ISO 06 10 16 25 DC valve Z1DW Shut-off valve -2 Pressure relief valves, manual operation RDM RM ZDV PRDM PRM ZDR Direct operated Pilot
4/3-4/2 Directional valve with solenoid actuation
4/3-4/2 Directional valve with solenoid actuation RE 18305-08/12.13 1/10 L5110 LC1-Z ) Size NG6 ISO 4401-03 CETOP RP121 H-03 CETOP 3) Series 00 Maximum operating pressure 350 bar [5076 psi] Maximum flow
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
Série D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US
Série D3 Válvula Direcional CETOP 5 e NG 10 Catálogo HY14-2502/US Catalog HY14-2502/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way
Hidro Pnevmo Tehnika 3,Vojeli St.,Kazanlak, Bulgaria Tel.: / Fax : +359/
Tehnika 3,Vojeli St.,Kazanlak, Bulgaria Tel.: +359 431/ 62 228 Fax : +359/ 62 019 DIRECTIONL CONTROL VLVES RS04.. /.. BV 99 /... RS06 V.. /.. RHB06-.. /..... RS06 V.. /.. 4/2 RH06/20 RM 06 /.. 4/2 RH06/20.
Proportional Pressure Reducing Valves Series PE*W (Parker), R4R (Denison)
Characteristics / Technical Data Series PE*W (Parker), RR (Denison) Subplate mounted proportional pressure reducing valves are available with both Parker (series PE*W) and Denison (series RR) model codes.
Remote Process Actuation Control System AirLINE - Siemens ET 200S
Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility
Directional spool valves, direct operated, with solenoid actuation. Type WE
Directional spool valves, direct operated, with solenoid actuation Type WE RE 23178 Edition: 2013-06 Replaces: 04.09 Size 6 Component series 6X Maximum operating pressure 350 bar [5076 psi] Maximum flow:
RPE3-04. Functional Description HA /2013. Directional Control Valves Solenoid Operated. Replaces HA /2010
Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) HA 4014 09/2013 Replaces HA 4014 10/2010 4/3-, 4/2- way directional control valves with solenoid
Directional Control Valves. General Description. Features. Specifications
Technical Information General Description directional control valves are high-performance, 4-chamber, direct operated, wet armature, solenoid controlled, 3 or 4-way valves. They are available in 2 or 3-position
4/3 4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
RA 183-52/1.11 1/1 4/3 4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections B8_8 (EDBZ) Summary Description Page General specifications 1 Ordering
4/3, 4/2 and 3/2 explosion-proof solenoid directional valve
01/06 4/3, 4/2 and 3/2 explosion-proof solenoid directional valve Type G...WE10...L3X 2.22 Size (NG) 10 Up to 315 bar Up to 120 L/min Contents Function and configuration Specifications 03 Spool symbols
4/3 and 4/2 Proportional directional valve elements L8580 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING
/ and / Proportional directional valve elements L88 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING L88 (EDC-P) RE 181-9 Edition:.16 Replaces: 7.1 7.1 Size 6 Series Maximum operating pressure
The manifolds can be powered through various fieldbus systems, multipole or common terminals.
Servo-Assisted, Modular, 8mm Wide / and 4/ Multi-Way Valves; Servo Assisted; Flow Rate: 0.6 ft /min.; /8 NPT and /4 O.D. Legris Connections Advantages / Benefits Optimum system solutions due to high level
Series P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
Proportional pressure reducing valve, pilot operated
Proportional pressure reducing valve, pilot operated RE 29177/07.05 1/10 Type DRE6X Nominal size 6 Unit series 1X Maximum working pressure P 315 bar, T 250 bar Maximum flow rate 40 l/min List of Contents
Auxiliary valves. Lever. Spool positioner Check valve Spool
Auxiliary valves Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 1 -Dimensions RP80... 2 -Dimensions RP60... 3 -Lever mechanism... 4 -Spools/spool control... 5 -Inlet cover/outlet
Proportional pressure relief valve, pilot operated
Proportional pressure relief valve, pilot operated RE 29156/07.05 1/10 Type DBE6X Nominal size 6 Unit series 1X Maximum working pressure P 315 bar, T 250 bar Maximum flow rate 40 l/min List of contents
4/3 and 4/2 on-off directional valve elements L8511 with flow (EDC-DZ) sharing control (LUDV concept) L8511 (EDC-DZ)
4/3 and 4/2 on-off directional valve elements L8511 with flow (EDC-DZ) sharing control (LUDV concept) L8511 (EDC-DZ) RE 1831-11 Edition: 6.218 Replaces: 7.12 2.216 Size 6 Series Maximum operating pressure
Directional spool valves, direct operated, with solenoid actuation. Type WE. Features. Contents
Directional spool valves, direct operated, with solenoid actuation Type WE H7564 Features 4/3, 4/2 or 3/2 directional design High-power solenoid Porting pattern according to DIN 24340 form A Porting pattern
D4E DIRECT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 41
83 250/198 ED D4E DIRECT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP 05 p max 250 bar Q max (see performance ratings table) MOUNTING INTERFACE OPERATING
4/3 and 4/2 Proportional directional valve elements L8581 with flow (EDC-P1) sharing control (LUDV concept) PATENT PENDING
4/3 and 4/2 Proportional directional valve elements L881 with flow (EDC-P1) sharing control (LUDV concept) PATENT PENDING L881 (EDC-P1) RE 1831-1 Edition: 6.218 Replaces: 7.12.217 Size 6 Series Maximum
ADH /3 AND 4/2
ADH.7... STANDARD SPOOLS FOR ADH.7 CH. I PAGE 53 TECH. SPECIFICATIONS ADH.7... CH. I PAGE 54 SUBPLATES.7... CH. I PAGE 55/56 CETOP 3/NG06 CH. I PAGE 8 STANDARD SPOOLS FOR AD.3.E CH. I PAGE 0 AD.3.E...
DENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C
DENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C 2/2-Way Function / Cavity conform to ISO 7368 (DIN 24342) Publ. 7 EN 5060 A FEATURES, DESCRIPTION FEATURES x High flow cartridges give highest
Directional spool valves, direct operated, smoothly switching, with solenoid actuation
Directional spool valves, direct operated, smoothly switching, with solenoid actuation Type WE..73 A12 H7564 Features 4/2 or 4/3 directional design Porting pattern according to DIN 24340 form A Porting
Proportional pressure reducing valve, pilot operated, with inductive position transducer
Proportional pressure reducing valve, pilot operated, with inductive position transducer RE 29182/07.05 1/10 Type DREB6X Nominal size 6 Unit series 1X Maximum working pressure P 315 bar, T 250 bar Maximum
Solenoid valves VZWM-L, NPT
Key features and type codes General Indirectly actuated diaphragm valve Process valve connection N14 N2 Flow rate 1400 31000 l/min Available in brass or stainless steel casting Wide range of coils VZWM
Seated valve 500 Type WVM-4B NG 4 up to 12 l/min
Seated valve 500 Type WVM-4B Features Direct operated Leakage free Good resistance to corrosion As 2/2-, 3/2-, 3/3-, 4/2-* or 4/3-valve with solenoid or alternative actuation * pilot-operated Design With
Servo solenoid valves with electrical position feedback (Lvdt AC/AC)
Servo solenoid valves with electrical position feedback (Lvdt AC/AC) Type 4WRPH6 Size 6 Unit series 1X Maximum working pressure 250 bar Nominal flow rate 4...40 l/min ( p 70 bar) List of contents Contents
6/2 ways/positions flow diverters L (VS151-VS152-VS155)
6/2 ways/positions flow diverters L721... (VS151-VS152-VS155) RE 1832-5 Edition: 2.216 Replaces: 5.214 Size 6 Series 1 Maximum operating pressure 31 bar (45 psi) Maximum flow 6 l/min (15.85 gpm) Ports