CILINDRI DIN ISO Ø DIN ISO CYLINDERS Ø
|
|
|
- Lesley Pearson
- 5 years ago
- Views:
Transcription
1 CILINDRI DIN ISO Ø DIN ISO CYLINDERS Ø TESTATE COVERS TUBO TUBE GUARNIZIONI SEALS BRONZINA BUSH ASTA PISTON ROD TIRANTI TIE RODS ALLUMINIO ALUMINIUM ALLUMINIO ANODIZZATO ANODYZED ALUMINIUM POLIURETANO + NBR POLYURETHANE + NBR BRONZO SINTERIZZATO SINTERED BRONZE ACCIAIO CROMATO CHROMIUM COATED STEEL ACCIAIO STEEL PRESSIONE DI FUNZIONAMENTO WORKING PRESSURE MAX 10 BAR TEMPERATURA DI IMPIEGO TEMPERATURE -20 C +80 C CON ARIA SECCA -20 C +80 C WITH DRY AIR FLUIDO WORKING FLUID ARIA COMPRESSA FILTRATA E LUBRIFICATA E NON FILTERED AND LUBRICATED OR NOT COMPRESSED AIR VERSIONI DISPONIBILI AVAILABLE VERSIONS CDE_X - CDEM_X - CDEP_X - CDEMP_X - CDEA_X - CDEMA _X- CDEAP_X - CDEMAP_X CORSE STANDARD STANDARD STROKES Ø mm DOPPIO EFFETTO DOUBLE ACTING 72
2 DOPPIO EFFETTO DOUBLE ACTING CDEØ/...X CDEMØ/...X DIMENSIONI DIMENSIONS Ø mm ØD1 ØD2 KK A ØB VD VA L2 RT BG TG EE F PL WH L8 E CH1 CH2 CH M36X M16X /4 G M36X M16X /4 G FORZE DI TRAZIONE E SPINTA (6 BAR) TRACTION AND THRUST FORCES (6 BAR) Ø mm FORZA DI SPINTA (N) THRUST FORCE (N) FORZA DI TRAZIONE (N) TRACTION FORCE (N)
3 ACCESSORI DI FISSAGGIO MOUNTING ACCESSORIES FLANGIA/FLANGE (MF1-MF2) Ø mm TG ØD ØFB R TF L4 S UF E MF CODICE/CODE M16x AFP160X M16x AFP200X Nota: fornito completo di 4 viti DIN 7984 Note: supplied with 4 screws DIN 7984 MATERIALI: CORPO IN ALLUMINIO BUSSOLE IN ACCIAIO E PTFE MATERIALS: ALUMINIUM BODY STEEL AND PTFE BUSHES CERNIERA FEMMINA / FEMALE HINGE (MP2) Ø mm TG CB UB ØCD FL L ØD L1 L4 S MR E CODICE/CODE M16x CERF160X M16x CERF200X Nota: fornito completo di 4 viti DIN 912 Note: supplied with 4 screws DIN
4 ACCESSORI DI FISSAGGIO MOUNTING ACCESSORIES MATERIALI: CORPO IN ALLUMINIO BUSSOLE IN ACCIAIO E PTFE MATERIALS: ALUMINIUM BODY STEEL AND PTFE BUSHES CERNIERA MASCHIO /MALE HINGE (MP4) Ø mm TG EW ØCD FL L ØD L1 L4 S MR E CODICE/CODE M16x CERM160X M16x CERM200X Nota: fornito completo di 4 viti DIN 912 Note: supplied with 4 screws DIN 912 MATERIALI: CORPO IN ALLUMINIO SNODO SFERICO IN ACCIAIO E BRONZO MATERIALS: ALUMINIUM BODY STEEL AND BRONZE SPHERICAL BEARING CERNIERA MASCHIO SNODATA / MALE HINGE WITH SPHERICAL BEARING (MP6) Ø mm TG CX DL L EX EP L3 R1 S L4 ØD L1 E MS CODICE/CODE M16x CERMT160X M16x CERMT200X Nota: fornito completo di 4 viti DIN 912 Note: supplied with 4 screws DIN
5 ACCESSORI DI FISSAGGIO MOUNTING ACCESSORIES PIEDINO BASSO/LOW-RISE PEDESTAL (MS1) Ø mm TG TG2 AH R2 ØAB AO AU TR AT S L7 E CODICE/CODE M16x AF160X M16x AF200X Nota: fornito completo di 2 viti DIN 912 Note: supplied with 2 screws DIN 912 CERNIERA INTERMEDIA / INTERMEDIATE HINGE (MT4) Ø mm A TM TL TK ØTD ØD ØD1 UW DADO/NUT (*) CODICE/CODE M16x2 CERI160XR M16x2 CERI200XR Nota: l utilizzo della cerniera è consentito solo in abbinamento a cilindri con tiranti interamente filettati. L accessorio viene fornito provvisto di appositi dadi per il posizionamento e fissaggio.(*) Note: it is possible to use the intermediate hinge only with cylinders equipped with threaded tie rods. The accessory is supplied with the nuts for the positioning and fixing.(*) 79
6 ACCESSORI DI FISSAGGIO MOUNTING ACCESSORIES PERNO PER CERNIERA FEMMINA /PIVOT FOR FEMALE HINGE (AA4) Ø mm ØEK EL ØB LB A CODICE/CODE PERC160200X Nota: fornito completo di seeger Note: supplied with seegers MATERIALI: CORPO IN ALLUMINIO BUSSOLE IN ACCIAIO E PTFE MATERIALS: ALUMINIUM BODY STEEL AND PTFE BUSHES ARTICOLAZIONE A SQUADRA /SQUARE JOINT (AB7) Ø mm ØCK EM BR PH GL ØHB LB BT TE RA ØD LD UL UR EA CODICE/CODE ART160X ART200X 80
7 ACCESSORI DI FISSAGGIO MOUNTING ACCESSORIES MATERIALI: CORPO IN ALLUMINIO BUSSOLE IN BRONZO MATERIALS: ALUMINIUM BODY BRONZE BUSHES SUPPORTO PER CERNIERA INTERMEDIA / SUPPORT FOR INTERMEDIATE HINGE (AT4) Ø mm ØCR FN FK ØHB ØA LA TH C UL NH ØB CODICE/CODE SUP160200X DADO PER ASTE / PISTON ROD NUT Ø mm A B C CODICE/CODE M36x ANA160200X 81
8 ACCESSORI DI FISSAGGIO MOUNTING ACCESSORIES TESTA A SNODO AUTOLUBRIFICANTE / SELF-LUBRICATING ROD ENDS D3 W L3 A ØD ØD1 C1 B ØD4 ØD5 L5 L7 H1 L4 D2 CODICE/CODE M36x TSNDM36x2 FORCELLA CON PERNO/CLEVIS WITH PIVOT D A B ØD1 S N L1 L E ØD2 CODICE/CODE M36x FORM36DIN 82
9 SENSORI SENSORS SERIE / SERIES Interruttore con cavo Switch with cable Interruttore con connettore M8 Switch with connector M8 Tipo Sensore Sensor Type Tensione di alimentazione Power supply Corrente di commutazione Switching current Potenza (carico ohmico) Power (ohmic load) Caduta di tensione On voltage drop Tempo commutazione ON Response time ON Tempo commutazione OFF Response time OFF Punto di lavoro nominale Nominal operate point Differenza ON-OFF ON-OFF differential Temperatura lavoro Operating temperature Frequenza di lavoro Operating frequency Vita elettrica Life time Protezione contro inversione di polarità Polarity reversal protection Protezione contro corto-circuito Short circuit protection Grado di protezione Environmental protection degree Configurazioni circuitali Wiring schematics ZS ZS3201 ZS3300 ZS4300 ZS3210 ZS3310 ZS4301 Contatto reed N.O. Reed switch N.O. Contatto reed PNP N.O. Reed switch PNP N.O. Magnetoresistivo PNP N.O. Magnetoresistive PNP N.O V ac/dc 3 30 V dc 0.2 A 6 W 3 V / 1 V 0.5 ms 0.8 μs 0.1 ms 0.3 μs AT 40 Gauss (34-46) Gauss 5 10 AT 5 15 Gauss max 500 Hz C max 200 KHz 10 7 imp 10 9 imp SI / YES / I P
10 CAVI PER SENSORI SENSORS CABLES 2 FILI 2 WIRES CONNETTORE M8 M8 CONNECTOR 3 FILI 3 WIRES Lunghezza cavo standard Standard cable lenght Conduttori Conductors Isolamento Isolation Guaina Sheath Test di fiamma Flame test Certificazione Certification 2.5 m (cavo diretto / flying connector with cable) 0.3 m (cavo con connettore / plug connector with cable) 0.14 mm2 / AWG 26 / (36x 0.07 mm2) PVC PVC ø 2.7 mm V2 CEI EN 60529; CEI EN ; CEI EN ; CEI EN ; CEI EN 55022; CEI EN ;CEI EN CEI EN ; CEI EN ; CEI EN ; CEI EN ; CEI EN CIRCUITI DI PROTEZIONE PER SENSORI La commutazione di carichi induttivi da parte dei contatti REED produce un elevato picco di tensione al momento della disinserzione. Per tale motivo, al fine di prevenire eventuali scariche dielettriche oppure un arco voltaico, è necessario introdurre un circuito di protezione. Questo può essere: -un circuito R-C in parallelo al finecorsa se alimentato in V dc (vedi Fig.1) -un diodo in parallelo al carico se alimentato in V dc (vedi Fig.2) -n 2 diodi Zener in parallelo al carico se alimentato in V ac/dc (vedi Fig.3) -un varistore (VDR) in parallelo al carico se alimentato in V ac/dc (Fig.4) La commutazione di carichi capacitivi o l impiego di cavi con lunghezza maggiore a metri 10 produce picchi di corrente al momento dell inserzione. Perciò è necessario prestare attenzione garantendo la minima corrente necessaria per pilotare il sensore. (1020 ma). PROTECTION CIRCUIT FOR SWITCHES The switching of inductive loads made by REED produces an high voltage peak during the drop-out. In order to prevent dielectric discharges or voltaic arcs, you have to introduce a protection circuit. It can be: -a R-C circuit in parallel to the switch in case of V dc supply (Img.1) -a diode in parallel to the load in case of V dc supply (Img.2) -n 2 Zener diodes in parallel to the load with V ac/dc supply (Img.3) -a varistor (VDR) in parallel to the load with V ac/dc supply (Img.4) The switching of capacitive loads or the use of cables longer than 10 meters produces current peaks during the connection. For this reason you have to introduce a protection resistance near the switch on the brown wire. Please, pay attention in garanting the minimum necessary current to the switch. (1020 ma) 169
11 FISSAGGI PER SENSORI - CILINDRI TONDI MOUNTING PARTS FOR SENSORS - ROUND CYLINDERS Ø mm cilindro cylinder A B C D E F CODICE/CODE 8 Ø NT Ø NT Ø NT Ø NT Ø NT Ø NT-25 Ø mm cilindro cylinder B C CODICE/CODE NT NT NT NT
12 FISSAGGI PER SENSORI - CILINDRI TIRANTATI MOUNTING PARTS FOR SENSORS - TIE ROD CYLINDERS Ø mm cilindro cylinder A B C CODICE/CODE NT-3263XR NT-80100XR NT-125XR NT XR NT-250XR NT-320XR COPERTURA PER CAVA SENSORE COVERING FOR SENSOR SLOT MATERIALE/MATERIAL COLORE/COLOR LUNGHEZZA/LENGHT CODICE/CODE PLASTICA/PLASTIC BLU/BLUE 0.5 XLB
XG*-***-****-***-****
Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...
Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
Cylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
Large Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
bar -20 C C ( C for high temperature version) 1000 mm
Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
Extruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
Tie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
Series 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
ISO Technical details
Cylinders > piston rod cylinders > assembly groups > BP IO 15552 Technical details Operating pressure Cylinder with brake system XBP brake system 3... 6 bar Temperature range -10 C... +50 C Max. stroke
Tie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
Twin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
ELECTRIC CYLINDERS SERIES ELEKTRO ACTUATORS
ELECTRIC CYLINDERS SERIES ELEKTRO 1 ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552 An electric cylinder with a connection interface in accordance with in-line version ISO 15552. The piston rod extension is
Aluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
Sizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
Double acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
Air-Oil Systems, Inc.
Draft Copy 06-24-09 Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components, have
Tie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
Tie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
AIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
CILINDRI PNEUMATICI ISO 6431 PNEUMATIC CYLINDERS
ILII PUTII ISO 6431 PUTI YLIS ISO 15552 SIS X lesaggi 32-40-50-63-80-100-125 Light alloy end caps painted gray. lean profile aluminium body gauged inside and outside. isponibile con certificazione TX vailable
INTEGRATED HYDRAULIC BRAKE ACTUATORS
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit
Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
ISO/TC 131/SC 3 Secretariat: DIN Voting begins on: Voting terminates on:
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 15552 ISO/TC 131/SC 3 Secretariat: DIN Voting begins on: 218 1 17 Voting terminates on: 218 3 14 Pneumatic fluid power Cylinders with detachable mountings, 1
AIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
STANDARDISED MOUNTINGS
STNDRDISED MOUNTINGS for PES / PLS cylinders conforming to ISO 15552-FNOR-DIN standard Series 434 MOUNTINGS CONFORMING TO ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications duty Construction
HEAVY DUTY PNEUMATIC CYLINDERS
HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless
1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95
1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T
LPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
Modello: Tolleranza: Classe 1, sec. DIN IEC 584. Terminale: Esempio
Termocoppia ad isolamento minerale con testa a squadra leggera T-220 Termocoppia ad isolamento minerale con testa a squadra Din B sec DIN 43729 Materiale isolante: Guaina inox: MgO super compresso Acciaio
Our policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
ISO CYLINDERS Ø ACTUATORS
ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration
Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
Nominal operating pressure (continuous service) bar 160. Maximum operating pressure bar 210. Peak pressure bar 250. Maximum speed (standard) m/s 0,5
71 /17 ED HC2 HYDRAULIC CYLINDERS SERIES 2 ISO 62/2 (1991 EDITION) DIN 24554 DESCRIPTION Double acting cylinders constructed in compliance with ISO 62/2 (1991 edition) and DIN 24554. The compact design
Stainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
PVA/182000, PVA/182000/M
Smooth Line cylinders with or without integrated switches Double acting Ø 3... 100 mm Smooth and spherical profile design with concealed tie rods Special polyurethane wiper seal Body sealing conforms to
CYLINDERS. Moving more than air
CYLINDRS 1 Moving more than air Content 1-2 1-2 page 1.1 Round cylinders 1.1.1 RI(M) / RI(M) / RIB(M) / RID(M) Round cylinders according to ISO 6432 piston-ø 8 25 mm 3 1.1.2 Accessories for round cylinders
AIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK
Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for
PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm
ISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
PRA/882000/M/EX, IVAC Clean Line cylinder Magnetic piston, double acting
> ø 3... 100 mm > Complete functional unit with LED display > TEX-zones depending on pilot control: zones &, II 3GD, Valve control module (VCM) zones 1 & 1, II GD, Pilot control on separate specification
RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm
Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and
STANDARDISED MOUNTINGS
for PS / PLS / PC cylinders conforming ISO 15552-FNOR-DIN (PS-PLS) ISO 21287 (PC) standards Series 434 MOUNTINGS CONFORMING WITH ISO 21287 - ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications
-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.
Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters 32... 125 mm -T- Stroke lengths 10...
Profile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
AIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane
valvole 16 mm ad azionamento pneumatico
valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:
PRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
valvole ad azionamento pneumatico
Valvole a spola /-5/-5/ con attacchi filettati G/8 -G/4 /-5/-5/ spool valves with G/8 -G/4 threaded ports Montaggio in linea, su collettori multipli o su basi manifold (pag. 9-0) Installation in-line,
M/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
Standard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and
PRA/182000, PRA/182000/M
Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders
PRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting
P/822000/M, P/822000 Smoothline cylinder > 32... 00 mm > Cylinder and mounting conform to ISO 5552 > eed or solid state switches can be mounted flush with the profile barrel > lternative air ports as standard
RM/900/M Heavy duty cylinders Ø 1 1/4... 4
Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting
LPRA/182000/M, ISO cylinder Magnetic piston, double acting
> > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE
DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE METRIC AIR CYLINDER
METRIC AIR CYLINDER WITH STAINLESS STEEL PISTON ROD, ALUMINIUM CYLINDER TUBE AND WITHOUT MAGNETIC PISTON THIS STANDARD REFERS TO THE DIMENSIONS REQUIRED FOR INTERCHANGEABILITY FOR SINGLE ROD, DOUBLE ACTING
Short-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement
WST Stopper Cylinder Specifications Features Media Clean dry compressed air Operating Pressure Range 22 to 102 psi (1.5 to 7 Bar) Max* Pressure 145 psi (10 Bar) Operating Temperature Range 32 to 140 F
Tube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table
Cylinder Ø32-125 mm with blocking device Series DZB... Blocking reverse stroke Series DZBA... Blocking forward stroke Mountings to ISO 15552 (ISO 6431) Special versions: according to CETOP RP 53 P (Piston
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
RODLESS CYLINDERS VERINS SANS TIGE CILINDRI SENZA STELO
Air Work's rodless cylinders are born from the requirement to reduce dimensions while granting the same stroke dimension. They are available in several versions and the bores vary from to mm. Main feature
Series CP95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series CP ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 6431, VDMA 2462, CETOP RP43P. CJ1 CJP CJ2 CM2 C8 C76 CG1 MB MB1 CP C C2 CA1 CS1 1.-1 Series CP Model Selection Execution Standard Type
Strokes (mm) N/en
IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated
Strokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting
S version Type... Standards... Cushioning... Rated temperature... Fluid... Working pressure... Proximity switch... Mounting and accessories... Materials... Single and double acting pneumatic microcylinders,
Series 452 Standard Cylinder to ISO 15552
Series Standard Cylinder to ISO 15552 www.numatics.com Table of Contents Series Series Cylinder Features and Benefits 3 Cylinder How to Order 4 Single and Double Rod 5 Cylinder Standard Mount Information
Standard cylinders DNCB, ISO 15552
Standard cylinders DNCB, ISO 15552 Features At a glance Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1 and UNI 10290)
R 159. Duty cycle. ED 100%; ED 60%(90 C) Direzione del fluido Unidirezionale Flow direction Unidirectional Diametro di passaggio DN 8 mm.
Elettrovalvola Serie R R 159 Rpe s.r.l. Via S. Ambrogio, 3 22070 Carbonate (CO) Italy Tel. +39 0331832515 Fax +39 0331832501 www.rpesrl.it CLASSIFICAZIONE CLASSIFICATION Tipologia Semplice Type Single
TELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
P1D-B Pneumatic Cylinders
P1D-B Pneumatic Cylinders According to ISO 15552 P1D-B series. This series features a profile design and is the basic ISO cylinder for simple applications where no special options are required. This series
Climax Pneumatics Cnomo NFE Cylinders
Climax Pneumatics Cnomo NFE 49001 Cylinders End Caps Tube Tie Rods Seals Piston Rod Diecast Aluminum Anodized Aluminum Zinc Coated or Stainless Steel Polyurethane Chromium Coated Steel Working Pressure
Series C95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series C ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 2, CETOP RP3P. CJ1 CJP CJ2 CM2 C CG1 M C CA1 CS1 Variations Series Action Style asic Standard variations uit-in magnet Stainless
LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting
> > Ø 32... 320 mm > > Comprehensive range for the utmost versatility > > Wide temperature range > > Supplied complete with piston rod locknut > > Conforms to ISO 15552 (ISO 6431, VDM 24562 and NFE 49-003-1)
Our policy is one of continued research and development. We therefore reserve the right 1/98 N
ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:
Compact cylinders CDC, ISO 21287, Clean Design
Key features Design Easy to clean Easy to assemble Versatile With the CDC (Clean Design Compact) cylinder series, the ADN modular system has been expanded to include an easy to clean compact cylinder variant
Climax Pneumatics. Cnomo NFE Cylinders Easley, South Carolina
Climax Pneumatics Cnomo NFE 49001 Cylinders 1-800-732-8704 Easley, South Carolina End Caps Tube Tie Rods Seals Piston Rod Diecast Aluminum Anodized Aluminum Zinc Coated or Stainless Steel Polyurethane
Multi-position cylinders/adapter kits
Multi-position cylinders/adapter kits Multi-position cylinders ADNM Product range overview Function Version Type Piston Max. stroke Piston rod With female thread With male thread Doubleacting ADNM Single-ended
MATERIALS f 125: extruded profile, 20 um anodized allumium alloy Port size 0 32 =G1/8
O D AMIE NT O S VIGO. S.A. Tie rods cylinders to ISO 15552 standard www.rodavigo.net +34 986 288118 series CPUI DESCRIPTION Cylinders series "CPUI" comply with ISO 15552 standard, being in this way completely
Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
Cylinder Accessories Cylinder mountings; series CM1 Trunnion mountings. Brochure
Cylinder Accessories Cylinder mountings; series CM1 Trunnion mountings Brochure 2 Cylinder Accessories Cylinder mountings; series CM1 Trunnion mountings Center trunnion mounting, Series MT4 for Series
PRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush