Website:

Transcription

1 EQUIPMENT CATALOG 2016 by Website: FOR INQUIRIES ON MEMBERSHIP PLEASE CALL S. Cucamonga Ave., Ontario, CA Phone: (909) Fax: (909) YAFANA DRIVE, MENDEZ AVENUE, CENTURY CITY 1224

2 Table of Contents Adhesive Tape Seal Machine.. 4 Air Pillow Machines. 5 Bag on a Roll Bag Sealers-Semi and Fully Automatic 6-7 Bag / Pouch Sealer (Pick, Fill and Seal Machines)... 8 Band Sealers Vertical and Horizontal.. 9 Banding Machines (Paper and Plastic) BOPP/OPP/ Co-Ex Film.. 12 Carton Sealers Manual Adjust Automatic random with flap folding. 16 Hi-Speed fully automatic random.. 16 Carton Erectors 17 Pack assist stations 17 CD/DVD Overwrap Machines Checkweighers Clam Shell Sealers. 22 Conveyors Power Belted, and Stainless Steel Washdown. 23 Narrow width plastic slat top or stainless steel conveyor. 24 Flighted conveyors and Specialty conveyors.. 25 Flexible Skatewheel, Flexible Roller and Powered Roller.. 26 Gravity roller curve conveyors, 90 degree gravity curve 27 Straight sections of gravity roller conveyor.. 28 Cutting Machines (Hot and Cold). 29 Drop Sealer and Bag Opener. 30 Filling Equipment Auger Fillers.. 31 Piston Fillers. 32 Friction Feeders/ Batch Counting / Collating Systems Horizontal FFS (Form, Fill and Seal) machines Entry Level Medium Duty. 38 Hi Speed with Servo Drive 39 Hi Speed horizontal FFS shrink wrapping machine Horizontal FFS for pouches 3 or 4 sided seal I Bar Sealers and Table Top L Sealers.44 Impulse Sealers (Hand and foot operated) Induction Sealing Equipment 47 Ink Jet System L'Sealers - Fully Automatic Entry level Economy Series. 49 L Sealer and tunnel combination systems 50 Hi speed automatic L Sealer L'Sealers - Semi Automatic All-in-One Chamber machines Page 2

3 L Sealer Tunnel Combination machines Label Dispensers 59 Label Machines Mail Wrapper / Mail Bagging 62 Metal Detection Equipment Entry level 63 Hi Quality German manufactured heads 64 Poly Bundlers/Sleeve Wrappers Semi-Automatic 65 Fully Automatic In-Line. 65 Fully Automatic Right angle Ribbon Blender/Mixers.. 68 Shrink Films (Polyolefins).. 69 Shrink Tunnels Shrink Banding Tunnels (For shrink bands or neck bands etc) Shrink Sleeve Applicator Steam Tunnels Side Seal Machines Intermittent motion.. 82 Continuous motion (High Speed-Servo Drive) 83 Strapping Machines Semi-Automatic 84 Fully Automatic Stretch Wrapping Machines Tray Sealing-MAP Sealing Equipment Turntables-(Lazy Susan, Accumulation and Unscrambling) 97 Twist Tie Machines 98 Tying Machine 99 Vacuum Chamber Machines Vacuum Sealers (Entry Level, Medium Duty and Heavy Duty) Vacuum Bags Vertical FFS (Form, Fill and Seal) machines Vertical Sachet for 3 or 4 sided seal. 108 Vertical FFS for Liquids. 109 Weigh Scales for vertical FFS (2,4,10,14,16 and 20 heads) Z Bucket Elevators. 112 Incline Feeding Conveyors Discharge Conveyors 112 Working Platforms 112 Auger Fillers Volumetric Fillers Screw Conveyors. 114 Weigh Scales (Counting, Filling, Bench and Floor) Weigh Fill Scales X-Ray Inspection Equipment Page 3

4 ADHESIVE TAPE SEAL MACHINE The TA-20 Adhesive Tape Machine is designed to apply a ¾ wide clear adhesive tape strip around the perimeter of any container or lid to secure it and provide a tamper evident seal. Will wrap a large variety of container sizes from ( mm) wide x 1-14 (25-350mm) high *Custom sizes also available With the TA- 20 tape sealing is done quickly and smoothly with production rates of up to 500 pcs per hour. Model TA-20 $14,995 3/4 (18mm) wide clear adhesive tape roll, 2 mill OPP material 1,475 ft long rolls (450 meters) (240 roll minimum order) $ Page 4

5 AIR PILLOW MACHINE PP-300AP Air Pillow Machine (*Free machines available to qualified customers) The PP-300AP air pillow machine is designed for businesses who want to gain a big business advantage. Impress your customers with a clean, efficient and smart way to pack and protect your product. The PP-300AP will suit those operations that: Have limited space requirements or are in multi-functional work spaces Are occasional users of larger volumes of void fill Are low volume, small box shipper *FAST-will produce 145 (5 x 8 ) bags per minute and up to 5,000 bags per roll Specification: Electrical: 110 Volt Power: 700W Speed: 5 x8 Pillows at 140pcs/min 8 x 8 Pillows at 95 pcs/min Film: 1,600ft rolls(40micron or 1.6 mill) Dimensions: 24 x 18 x 17 Weight: 49lbs (net) / 62 lbs (gross) Qualified customer must purchase a minimum of 8-10 rolls of air pillow film per month to receive a free machine! (minimum contract period may apply) Model PP-300AP In Stock 5 x 8 x 40 Micron (1.6mill) x 1,600 ft rolls $82.50* 8 x 8 x 40 Micron (1.6mill) x 1,600 ft rolls $85.50* *Asterisk indicates item in stock Page 5

6 BAGS ON A ROLL-MANUAL/AUTO BAGGING MACHINES T-200 T-275 T-300 MODEL NO. DESCRIPTION T-200 Table Top Pre-Opened bags on a roll. Simply pull the bag into the loading and sealing position to allow the bag to blow open. Insert the product and press a footswitch or guard switch to seal the bag then pull the next bag into position. The bags remain connected and can be separated at the perforated line. Features dwell time and heat controls, Universal funnel. 110 or 220 volt, 40 PSI 1/16 wide seal, Up to 11 wide bags x 16 long. Dims:20 W x 14 L x 21 H T-275 Same specs as above with added feature of automatically feeding and advancing the bag into position. 4 color touch screen with manual operation or Automatic paced operation for faster cycle speeds. Maximum pass through height is 2.75 T-300 Fully Automatic-with automatic indexing, sealing and tear off or continuous strips. Cycle rate at up to 70 BPM, 3 Pass through height $2,395 $5,350 $10,295 T-375 T-1000 PF-10 Partition Table MODEL NO. DESCRIPTION T-375 Same specs as the T-300 with the added feature of a built in thermal transfer printer to print on your bags. Will print Next-Bag-Out just prior to loading. Features the Zebra printer at 203 dpi 4 x 12 print area. $23,695 T-1000 Top of the line bagger with cycle speeds of up to 100 BPM, Can be used $16,950 with automated equipment such as vibratory bowl feeders, counters, scales and infeed conveyors injection molding equipment etc, Can connect thermal transfer printer to this unit. PF-10 Partition Table-Help to keep part separated prior to loading into machine $1,495 Page 6

7 Bags on a roll vibrating bowls,weigh scales and parts counters etc. UC-2400 UF-5000 MODEL NO. DESCRIPTION UC-2400 Vibratory bowl feeder and parts counter to be used in conjunction with the T-1000 bagger. Great when used with fasteners, hardware electronic components etc. $22,950 UF-5000 Cleated compartment infeed conveyor used in conjunction with the T-1000 bagger. This conveyor allows you to set the production speed for guaranteed production results. $9,500 US-5000 US-7000 MODEL NO. DESCRIPTION US-5000 Semi-Automatic net-weigh / counting scale. Just slide any sample quantity in the load tray, key in your quantity, press the count button and you are finished. $9,850 US-7000 Automatic net weigh single or dual head scale. This is an automatic feeding solution for fasteners, injection molded parts, foods or any bulk product. Call for stock bags on a roll pricing $37,000 Page 7

8 BAG / POUCH SEALING MACHINES (Pick, Fill and Seal Machines) E-39 E-300 with 8 stations E-Series machines are intermittent motion and designed to be used with Pre-Made bags or stand up pouches. Features Omron PLC with 7 color touch screen. It can support 4 side sealed bags, stand up pouches or zipper bags. Great for filling bags of cereal, snacks, rice, teas, nuts, candy, liquid or powder type products. Pre-made bags are loaded into the magazine where these bags are picked up, opened and filled with product from a filling system such as linear scales, multi-head weigh scales, volumetric cup fillers, volumetric piston fillers or auger fillers, after filling the bag is advanced to the sealing station, after sealing the pouch/bag is dropped onto the take away conveyor. #304 Stainless Steel Construction. Fill Volume for E-39 is 2500ML (84oz or 5lbs) MODEL NO. DESCRIPTION $24,500 E-39 Designed for Pre-Made Bags Production Rate: Up to 15 BPM Bag Width: mm ( ) Bag Length: mm ( ) E-39G Designed for Pre-Made Gusseted Bags Production Rate: Up to 12 BPM Bag Width: mm ( ) Bag Length: mm ( ) E-39Z Designed for Pre-Made Zipper Bags Production Rate: Up to 12 BPM Bag Width: mm ( ) Bag Length: mm ( ) E-300 Designed for Pre-Made Bags Production Rate: Up to 30 BPM Fill Volume: 1000ml (34oz or 2 lbs) Bag Width: mm (4-8 ) Bag Length: mm (4-12 ) Bag deflator, Gas Flush and Zipper bag opener included Options Hot Stamp Ribbon Coder / Lot Numbers etc Gas Flush Discharge Conveyor $26,500 $26,500 $59,950 $1,750 $1,495 $2,500 Page 8

9 BAND SEALERS-CONTINUOUS Model PP-880I Model PP-M810 Model PP-1010I Model PP-880II Model Light Duty *PP-880I Horizontal-Table Top Band Sealer, right feed, Embossing- 1 line 18pt, 0- $1,195* 472 inches per minute, 8mm seal width, conveyor width 7, Max conveyor load 6.6 lbs, 33 L x 17 W x 13 H, Bag size , weight 66 lbs, 110 volt PP-M810 Horizontal, Same as above with Left to Right feed and Dry Ink Coding $1,495* PP-1010I Horizontal-Right to left feed with Dry Ink Coding, Wide 15mm seal $2,295 *PP-880II Horizontal with Vertical Kit Table Top Band Sealer, right to left feed, $1,295* Embossing (some assembly required) Same as above with Min 5.9 to Max 10.6 bag size. *PP-810II Vertical- Left to Right feed with Dry Ink Coding ( bag size only) $1,695* 15mm seal width- $350 Stainless Steel Stand- $325 Model PP-1120C PP-1120LD Dry Ink Coding-Black ink on white bag Model Medium Duty *PP-1120C Stainless Steel Construction, Horizontal Continuous Band Sealer, Right Feed, Tilt Head 30 degrees, Dry Ink Coding up to 20 characters per line, sealing speed /min, Conveyor 43 L x 8 W, Max conveyor load 16.5 lbs, Seal Width 8mm (.315) Machine dimensions 43 L x 24 W x 41 H, Weight 190 lbs, 110 Volt. *PP-1120LD Vertical band sealer with Dry Ink coder, right to Left feed, Stainless Steel Conveyor 55 L x 10 W, Single bag weight 11 lbs, Max conveyor load 33 lbs, Seal width 8mm, Speed /min, Bag size 3.9 min-28 max, Machine Dim 57 L x 27 W x 58 H *Asterisk indicates item in stock $3,995* $4,500* Page 9

10 BANDING MACHINES-PAPER and PLASTIC TZ-888 TZ-888A WK02-30 Model TZ ,20,30 or 40mm Tape Width Pkg Width: mm ( ) Pkg Height: 5-140mm (1/4-5.5 ) Machine Dimensions: 425mm L (16.75 ) x 320mm W (12.8 ) x 405mm H (16 ) Speed: PPM Power: 110 volt / Weight 25kg (55 lbs) Uses 500 ft tape rolls TZ-888A Same as above with arch and larger package capacity. Pkg Width: mm ( ) Pkg Height: 5-170mm (1/4-6.7 ) WK02-30 Same as above with large arch size of 470mm x 320mm (18.5 W x 12.6 H) Uses 30mm wide paper or plastic material $4,800* $4,995 $5,995 TZ-889 TZ-889A WK02-30B Model TZ-889 Same specifications as TZ-888 With larger tape roll capacity 2,000 ft rolls TZ-889A Same specifications as TZ-888A with arch and larger package capacity (6.7 W x 10.5 H) and larger tape roll capacity 2,000 ft rolls WK02-30B Same as above with larger arch 470mm x 320mm (18.5 W x 12.6 H) Uses 30mm wide paper or plastic rolls 2,000 ft *Asterisk indicates item in stock $5,250* $5,500 $6,500 Page 10

11 PAPER and PlASTIC TAPE ROLLS Tape Rolls Paper Tape White or Brown 500 ft Rolls 10mm x.15mm thick x 500 ft (1 roll) (120 rolls per case) 20mm x.15mm thick x 500 ft (1 roll) (60 ) 30mm x.15mm thick x 500 ft (1 roll) (40 ) 40mm x.15mm thick x 500 ft (1 roll) (30 ) Paper Tape White or Brown 2,000 ft Rolls 10mm x.15mm thick x 2,000 ft (1 roll) (30 rolls per case) 20mm x.15mm thick x 2,000 ft (1 roll) (15 ) 30mm x.15mm thick x 2,000 ft (1 roll) (10 ) 40mm x.15mm thick x 2,000 ft (1 roll) (7 ) Plastic Tape 500 ft Rolls 10mm x.12mm thick x 500 ft (1 roll) 20mm x.12mm thick x 500 ft (1 roll) 30mm x.12mm thick x 500 ft (1 roll) 40mm x.12mm thick x 500 ft (1 roll) Plastic Tape 2,000 ft Rolls 10mm x.12mm thick x 2,000 ft (1 roll) 20mm x.12mm thick x 2,000 ft (1 roll) 30mm x.12mm thick x 2,000 ft (1 roll) 40mm x.12mm thick x 2,000 ft (1 roll) $ 3.50 $ 6.50* $ 9.50* $12.50 $12.95 $25.95* $38.90* $51.85 $ 6.50 $12.95* $19.50* $25.95 $25.95 $51.85 $77.76 $99.50 Printed Tape Rolls (White Paper) 20mm x.15mm x 500 ft (1 color print) 150 roll minimum mm x.15mm x 500 ft (1 color print) 100 roll minimum mm x.15mm x 500 ft (2 color print) 150 roll minimum mm x.15mm x 500 ft (2 color print) 100 roll minimum mm x.15mm x 500 ft (4 color print) 150 roll minimum mm x.15mm x 500 ft (4 color print) 100 roll minimum 400 Plate charge of $ per color $10.50/ea $ 8.95 $13.25 $10.85 $11.60 $ 9.50 $14.95 $11.50 $12.75 $ 9.95 $16.75 $12.50 *Asterisk indicates item in stock Page 11

12 Heat Sealable CO-EX OPP Films (Call for pricing) Description: A general purpose, heat sealable, co-extruded, bi-axially oriented polypropylene film with the following features: Two side heat sealable Broad heat seal range One side corona treated FDA compliant Outstanding clarity and superior gloss Excellent Machinability Good moisture barrier Applications: Well suited for both horizontal and VFFS (Vertical Form Fill and Seal) machine applications such as Doboy, Illapack etc. Can be used on: Bakery items, cookies brownies, muffins Etc. Snack foods, crackers Etc. General box over-wrap DVD/CD Etc. Page 12

13 CARTON SEALERS MODEL NO. MODEL DESCRIPTION CT-50 Our most popular model CT-50-SS CT-50-3 CT-50-3-SS CT CT-50R CT-50 with Stainless Steel frame Same as CT-50 but with 3 tape heads Stainless Steel frame Same as above model with larger box capacity Semi-Automatic Uniform Carton Sealer with Side Drive Belts. Patented top and bottom Tape Heads accepts 2 Tape only Height: Min: 5 Max: 20 Width: Min: 4 Max: 20 Height: Min: 5 Max: 20 Width: Min: 4 Max: 20 Semi-Automatic uniform carton sealer with side drive belts. Min box width 5.25 Max: 20 Same as above Height: Max 26 Width: Max 26 Semi-Automatic Random Carton Sealer with Side Drive Belts Height: Min 4 Max 20 Width: Min 4 Max 20 Dual Side Drive Belt- 2 Lower side drive belts and 2 upper side drive belts. (Great for tall narrow boxes that twist or shift going through a regular tape machine) $3,650* $7,650 $4,950* $7,950 $4,650* $7,950* $6,500 Box Length: 6 Minimum; unlimited length Height: Min 6 Max 22 CT-50DB Width: Min 4 Max 16 CT-55 Semi-Automatic uniform carton sealer with 2 top and 2 bottom drive belts. (4 Drive belt system) Box Length: 6 Minimum; unlimited length Height: Min 4.5 Max 20 Width: Min 7 Max 19.5 CT-55-3 (Same machine as above with 3 tape heads) CT-55-LP (Low Profile) Same machine as above with offset tape heads will allow machine to process boxes as low as 2.0 high (bottom belt gap 4.5 ) CT-55R Random Automatic Carton Sealer, Length: 6 -Unlimited Width: 7-20 Height: (Std 2 tape heads) $3,850* $4,350* $5,995 $8,500* CT-55R-SS Stainless Steel CT-55R-3 Painted Frame with 3 tape heads $13,150 $ 8,900* Page 13

14 MODEL NO. MODEL DESCRIPTION CT Height: Max 26 $5,463* Width: Max 26 CT Height: Max 36 $6,498 Width: Max 36 CT-55-SS Stainless Steel Frame Construction $7,450 CT-55-2 BELT Dual bottom drive belt design, our lowest priced model available Box Length: 6 Minimum; unlimited length Height: Min 4 Max 20 Width: Min 7 Max 19.5 CT-55-2 Belt machine with 3 tape heads $2,995* $3,495* PP-554TS MODEL DESCRIPTION Uniform Semi-Automatic Carton Sealer with Top and Side Drive Belts. 2 Tape heads Std. Length: Min Unlimited Height: Min Max: 19.7 Width: Min Max: 19.7 $6,383 PP-554TS-26 Height: Max 26 Width: Max 26 PP-554TS-36 Height: Max 36 Width: Max 36 $7,188 $8,338 Page 14

15 MODEL NO. MODEL DESCRIPTION PP-556AU Semi-Automatic Random Carton Sealer with Top and Side Drive Belts. Designed for production runs where different size boxes will be used. Std 2 Tape Head (3 Optional) Safety Guarding with magnetic locks Length: 11.8 Min. Unlimited length Height: Min Max 19.7 Width: Min Max 19.7 $9,500* PP-556AU-3 Same machine as above with 3 tape heads $9,950 PP-556AU-SS Stainless Steel Version Inquire PP-556AU-26 Height: Max 26 $10,850 Width: Max 26 PP-556AU-36 Height: Max 36 $12,850 Width: Max 36 CT-50 BHO (Bottom Tape head Only!) $3,250* CT-50 BHO-3 (3 tape heads) $3,750 CT-50 BHO PP-558F MODEL DESCRIPTION Automatic Uniform Flap Closing Carton Sealer with easy manual carton size adjustment. Top and side drive belts. Std 2 tape heads (3 optional) Safety Guarding with magnetic locks length: Min Max 21.6 Height: Min Max 19.7 Width: Min Max 19.7 PP-558F-3 (Same machine as above with 3 tape heads $10,194* $10,650 PP-558F-SS Stainless Steel $15,850 Page 15

16 PP-559AF Automatic Random Flap Closing Carton Sealer With automatic carton size adjustment cycle. Photo eye senses box, and machine automatically adjusts to various box sizes with patented box positioning and hold down device. Std 2 tape heads (3 optional) Safety Guarding with magnetic locks length: Min Max 19.7 Height: Min Max 19.7 Width: Min Max 19.7 $29,650 PP-569SAF PP-566EG High Speed Fully Automatic Random carton sealer with Servo Drive flap closer system and photo eyes for automatic box positioning. Light curtain automatically adjusts upper tape head position for increased speeds. Machine features 2 side drive belts to pull the boxes through. Belt speed of 100 ft/min or up to 20 cartons per minute 220 volt, 3 phase power Std 2 tape heads (3 optional) Safety Guarding with magnetic locks length: Min 10 -Max 19.7 Height: Min Max 19.7 Width: Min Max 15.7 Uniform Semi-Automatic 4 Edge Carton Sealer with easy manual carton size adjustment. Top and bottom drive belts, 3 tape heads. 300 Cartons per hour. Box Length: Min Max Box Height: Min 6-20 Max Box Width: Min Max $47,950 $29,000 PP-566AEG Fully Automatic RANDOM 4 Edge Carton Sealing Machine. Production speeds of 250 cartons per hour. Top and bottom drive belts, 3 tape heads Box Length: 12 Min-27.5 Max Box Height: 6 Min-20 Max Box Width: 10 Min-20 Max $38,000 Page 16

17 Case Erector and Bottom Sealer. Compact design with easy adjustments for various carton sizes, HMI Touch panel Control. 60 pcs magazine storage Production speed: 9-12 ctn/min PP-568ERT-ML PP-563BE PP-563P Pak-51 3 Models to choose from: Small L x W x H Medium: L x W x H Large: L x W x H Semi-Automatic Pack Station Operator loads box into machine then pusher green button to activate bottom flap closer, when box is fully loaded operator simply closes the minor and major top flaps and pushes box into carton sealer. Adjustable legs from Box Size: mm ( ) L x mm ( ) W x mm ( ) H Air Required Semi-Automatic Bottom Flap Folder-Pack Station with Automatic Pusher Operator simply loads box into machine, pushes the foot switch and the bottom flaps are closed and when the box is filled the operator closes the minor and major flaps and pushes the green start button and the box is automatically pushed into the carton sealer. Box Size: mm ( )L x mm ( )W x mm (4-20 ) H Air Required Same system with larger box capacity: L W and High $28,500 $29,500 $30,500 $2,795* $5,750* $6,250 Optional Items: Infeed or Discharge Conveyor roller sections $250* Locking Casters (set of 4) $125* Leg Extension kit to raise conveyor height an additional 8 $150* Spare Tape Head 2 $795* Spare Tape Head 3 $875* 6 Tape heads available on selected model $ Call *Asterisk indicates item in stock Page 17

18 CD/DVD Overwrap Machines JT-50 Shown with TS-2002 TS-3000 Easywrapper BC- 300/Collection table MODEL Package Type Description JT-50 JT-50 Box Wrapper JT-50 Box Wrapper Infeed Easy Overwrapper Easy Overwrapper with double work station TS-2002 TS-3000-Box Wrapper (Includes infeed conveyor) CD and DVD Regular and Slim Line Box Wrapper Overwrap of CD and DVD cases, Speeds of up to 42 ppm Great for cosmetic, pharmaceuticals, vitamin or candy boxes. Speeds of 25 to 35 ppm $21,500 $25, meter belted infeed conveyor $ 5,000 Multiple Boxes sizes Semi-Automatic 2 step overwrap machine, easy change over to different box sizes, Max box size 8 ¼ L x 5.9* W x 3 1/8 H Speeds of 5 ppm Same machine as above with 2 work stations to increase speed to 10 ppm CD and DVD Regular and Slim Line Overwrap of CD and DVD cases, Speeds of 50 ppm, Easy changeover Max pkg size: 220mm x 145mmw x 30mm H 8.6 L x 5.7 W x 1.18 H Fully automatic, Servo Drive motors, PLC controlled. Great for cosmetic, pharmaceuticals, vitamin or candy boxes. Speeds of 35 to 40 ppm Box width: 2 ¾ (70mm) to 8.66 (220mm) Box length: 1 3/8 (35mm) to 4 ½ (115m) Box height: ½ to 3 (75mm) $18,500 $24,950 $25,500 $38,950 Page 18

19 MODEL Package Type Description MD-350 Multi Pack machine 3, 5 and 10 pack of CD cases 25ppm Servo drive with PLC programming can also run multiple cosmetic or pharmaceutical boxes $42,000 Inf PCS Count for CD 100 PCS Count for DVD Infeed belt with 4 rows of hoppers Air required $7,995 HZ-Infeed Horizontal Belted infeed accumulation conveyer $4,700 BC-300 Discharge collection table (100 piece count) $4,995 Model 800 Disc Detector Detects if CD is in package-will eject if not $1,800 Optional Accessories Additional Tooling $ 795 Print film registration $3,180 Page 19

20 CHECKWEIGHERS Mettler Toledo-Hi Speed /Checkweighers and Metal Detectors *These are High Speed-High Quality units! Beltweigh-XC Beltweight-XC Combi Model Description Max Capacity Accuracy +/- Check Speed Beltweigh XC 2 Belt check weigher, Stainless steel frame Construction, Belt width 200mm (7.8 ) 6,000g 1-2g 280ppm $Call Beltweigh XC Beltweigh XC3 Beltweigh XC-Combi 3 Belt check weigher, Stainless steel frame Construction, Belt width 200mm (7.8 ) 3 Belt check weigher, Stainless steel frame Construction, Belt width 300mm (118 ) 2 Belt combination metal detector and checkweighers. Belt width 200mm (7.8) Aperture height of 150mm (5.9 ) 6,000g 1-2g 280ppm $Call 3,500g 1-2g 100ppm $Call 6,000g 1-2g 280ppm $Call Prices will vary depending on options, number of belts, software packages. Please consult factory for actual machine quote. Page 20

21 Check Weighers Entry Level UC-11 with mechanical flipper type rejector Model Description Weight Range Accuracy Check +/- Speed UC-11 Checkweigher #304 Stainless steel frame construction, Wipe down, 7 Touch screen, PLC, 50 program memory Max product width 8.6 (220mm) Max product length 11.8 (300mm) g (.035oz -70oz- 4lbs) 0.5g-1.5g 65ppm $13,500 UC-12S High Speed Checkweigher (5-200g) (.17oz-7oz) +/- 0.5g@100g 120ppm $16,500 UC-15 UC-25 Checkweigher Max product width 15.7 (400mm) Max product length 17.7: (450mm) Heavy Duty Checkweigher Product Width: 400mm (15.7 ) Product Length: 450mm (17.7 ) 50-6,000g (1.7oz-211oz- 13lbs) 1-30kg (66lbs) +/-3g 40ppm $13, g 18.8 oz 3 ppm $16,995 Model Description Rejecter Mechanical flipper type rejecter included Included Rejecter for UC-25 Pneumatic pusher-variable Speed $4,950 Page 21

22 CLAM SHELL SEALERS The Clam Shell Sealer The Clam Shell Sealer is equipped with two heated 3/8 wide and 10mm long serrated jaws. It has two temperature settings, Low 250F/120C and High 350F/175C. Ideal for sealing poly packing cases such as clam shell and other similar types of containers. Handles remain cool during operation. The sealer can be used in the voltage range of v. Effective welding area is 4mm x 10mm Product Dimensions are 8.2 L x 2.5 W x 1 H weight 10oz. Can spot seal: OPS,PSP, PVC, and EPS Model KF-772DH $99 QnPak Clam Shell Ultrasonic Sealer The Ultrasonic Hand Held Sealer offers the fastest hand held method for sealing clam shells. Dual heat multi-purpose hand held ultrasonic heat sealer. Ideal for sealing thin clam shells or for tacking. No waiting time to preheat. Spot seals OPS, PSP, PVC, HIPS, PPF, PP, and A-PET materials. Easy to operate. Turn the unit on. Place the package to be spot welded between the points on the handset and depress. Move to the next place to be spot-welded on the package and repeat. The clam shell is spot-welded by ultrasonic waves. Can spot seal: PSP, OPS, HIPS, PPF, PP, A-Pet and PVC Model OnPak $665* *Asterisk indicates item in stock Page 22

23 CONVEYORS-POWER BELTED PP-36B PP-72B PP-144B-SS MODEL NO. DESCRIPTION PP-36B PP-36B-SS PP-72B PP-72B-SS PP-108B PP-108B-SS PP-144B PP-144B-SS PP-180B PP-180B-SS PP-240B PP-240B-SS 3 ft Belted infeed conveyor x 18 wide belt, variable speed with adjustable side guides. Stainless Steel Frame Construction, IP-55 Low pressure wash down 6 ft Belted infeed conveyor x 18 wide belt, variable speed drive with adjustable side guide rails. Stainless Steel Frame Construction, IP-55 Low pressure wash down 9 ft Belted infeed conveyor x 18 wide belt, variable speed drive with adjustable side guides. Stainless Steel Frame Construction, IP-55 Low pressure wash down 12 ft Belted infeed conveyor x 18 wide belt, variable speed drive with adjustable side guides. 1 HP motor Stainless Steel Frame Construction, IP-55 Low pressure wash down 15 ft Belted infeed conveyor x 18 wide belt, variable speed drive with adjustable side guides. 2 HP motor Stainless Steel Frame Construction, IP-55 Low pressure wash down 20 ft Belted infeed conveyor x 18 wide belt, variable speed drive with adjustable side guides. 2 HP motor Stainless Steel Frame Construction, IP-55 Low pressure wash down $2,850* $4,095 $3,995* $5,795 $5,600 $8,550 $7,200 $11,400 $8,695 $12,950 $10,995 $15,500 *Asterisk indicates item in stock Standard conveyors come with white FDA food approved belting (White or Blue) Plastic Intralox belting can be substituted as no additional cost. Other belt lengths available up to 30 ft long-please inquire /Adjustable height legs from Standard Page 23

24 CONVEYORS-Narrow width Plastic or SS belting PP-108SS Shown - Stainless Steel frame construction, available with either Plastic Slat Top or Stainless Steel Conveyor Belting, Standard width is 4, we also offer these conveyors in 6 width. MODEL NO. DESCRIPTION PP-72SS PP-108SS PP-144SS PP-180SS *Asterisk indicates item in stock 6 ft Plastic slat top or stainless steel conveyor belting, 4 wide belt, variable speed, w/adjustable side guide rails. Stainless Steel Frame Construction, IP-55 Low pressure wash down 9 ft Plastic slat top or stainless steel conveyor belting, 4 wide belt, variable speed, w/adjustable side guide rails. Stainless Steel Frame Construction, IP-55 Low pressure wash down 12 ft Plastic slat top or stainless steel conveyor belting, 4 wide belt, variable speed, w/adjustable side guide rails. Stainless Steel Frame Construction, IP-55 Low pressure wash down 15 ft Plastic slat top or stainless steel conveyor belting, 4 wide belt, variable speed, w/adjustable side guide rails. Stainless Steel Frame Construction, IP-55 Low pressure wash down $3,595 $4,995 $5,350 $7,200 $7,150* $9,600 $8,950 $11,950 Page 24

25 CONVEYORS-Flighted PP-36F Flighted PP-72F Flighted PP-72F with Friction Feeders MODEL NO. DESCRIPTION PP-36F PP-36F-SS 3 ft Flighted/lugged infeed conveyor x 18 wide belt, variable speed, w/adjustable side guide rails. Std flight lug spacing 18 Stainless Steel Frame Construction, IP-55 Low pressure wash down $3,500* $4,995 PP-72F PP-72F-SS 6 ft Flighted/lugged infeed conveyor x 18 wide, variable speed drive, adjustable side guides. Std flight lug spacing is 18 Stainless Steel Frame Construction, IP-55 Low pressure wash down $5,995* $7,800 PP-108F PP-108F-SS 9 ft Flighted/lugged infeed conveyor x 18 wide belt, variable speed, w/adjustable side guides. Std flight lug spacing 18 Stainless Steel Frame Construction, IP-55 Low pressure wash down $7,995 $10,500 PP-144F PP-144F-SS 12 ft Flighted/lugged infeed conveyor x 18 wide belt, variable speed, w/adjustable side guides. Std flight lug spacing 18 Stainless Steel Frame Construction, IP-55 Low pressure wash down $10,500 $12,500 CONVEYORS-Specialized PP-72FP (Flight Paddle Conveyor) PP-72FB (Flight Bar Conveyor) MODEL NO. DESCRIPTION PP-72FP PP-72FP-SS 6 ft Flighted Paddle conveyor/lugged infeed conveyor x 18 wide belt, variable speed, w/adjustable side guide rails. Std flight lug spacing 18 Stainless Steel Frame Construction, IP-55 Low pressure wash down $6,500 $8,500 PP-72FB PP-72FB-SS 6 ft Flight Bar Conveyor is great for multi pack applications where transporting 3 cans or 6 package together in a straight line and you need to feed into an automated packaging machine. 16 wide max pkg width, variable speed drive, adjustable side guides. Std flight bar spacing is 13 Stainless Steel Frame Construction, IP-55 Low pressure wash down $6,995* $8,900 Page 25

26 Conveyors-Flexible Skatewheel and Roller PP18-16 SW (Skatewheel) PP18-16 GR Model Description SW Flexible Gravity Skatewheel Conveyor PP SW 14 Wide Flexible Gravity Skatewheel Conveyor adjustable from 3 ft compacted to 12 ft extended, adjustable height from 28 to 44, 175 lb capacity per linear ft, Heavy duty Red Nylon wheels, 5 Dia Locking casters. $945* PP14-16 SW 14 wide, 4 ft compacted to 16 ft expanded $1,165* PP14-20 SW 14 wide, 5 ft compacted to 20 ft expanded $1,360 PP14-24 SW 14 wide, 6 ft compacted to 24 ft expanded $1,595 PP18-12 SW 18 wide, 3 ft compacted to 12 ft expanded $1,050* PP18-16 SW 18 wide, 4 ft compacted to 16 ft expanded $1,295* PP18-20 SW 18 wide, 5 ft compacted to 20 ft expanded $1,520 PP18-24 SW 18 wide, 6 ft compacted to 24 ft expanded $1,750 PP24-12 SW 24 wide, 3 ft compacted to 12 ft expanded $1,095 PP24-16 SW 24 wide, 4 ft compacted to 16 ft expanded $1,385 PP24-20 SW 24 wide, 5 ft compacted to 20 ft expanded $1,650 PP24-24 SW 24 wide, 6 ft compacted to 24 ft expanded $1,895 GR Flexible Gravity Roller Conveyor PP GR Gravity roller conveyor. 18 wide expandable from 3 ft to 12 ft. Adjustable height from 28 to 44, 150 lb capacity, 1 3/8 Dia zinc plated rollers, fully extended axle center 5 Locking casters. $1,465 PP18-15 GR 18 wide, 4 ft compacted to 16 ft expanded $1,850 PP18-20 GR 18 wide, 5 ft compacted to 20 ft expanded $2,185 PP24-12 GR 24 wide, 3 ft compacted to 12 ft expamded $1,575 PP24-15 GR 24 wide, 4 ft compacted to 16 ft expanded $2,020 PP24-20 GR 24 wide, 5 ft compacted to 20 ft expanded $2,400 PR- Powered Roller Conveyors-Variable Speed FPM PP24-15 PR Powered Roller Conveyor- 24 wide, 5 ft compacted to 16 ft expanded $7,350 PP24-20 PR Powered Roller Conveyor- 24 wide, 6 ft compacted to 20 ft expanded $8,550 *Asterisk indicates item in stock All conveyors F.O.B. Swaunee, GA (Package end stop included with all conveyors) Add 5% for Black Polymer skatewheels Add 9% for Steel skatewheels 7 Min Pkg length requires 3 axle centers/ 9 Pkg length requires 4 axle centers, 11.5 Pkg length requires 5.25 axle centers Page 26

27 CONVEYORS-GRAVITY CURVES PP shown with PP-1622MK and PP system PP shown with PP-1519ECMC system 90 and 180 Degree Gravity Curved Conveyors MODEL NO. DESCRIPTION PP degree curved conveyor 15 wide with 24 straight section, $1,150* ¾ dia aluminum rollers on 1 ¼ centers with Stainless Steel concentric curve to keep package from falling off edge, painted legs. Adjustable height legs from 28 to 42 This conveyor normally sold with PP1519ECMC machines PP degree curved conveyor with 36 straight section $1,395* This conveyor is normally sold with the PP1622MK L Sealer and PP Shrink tunnel set PP degree curved conveyor with 72 straight section $1,795* PP-180C 180 Degree curve only-right to left (Standard) $ 895* PP-180C-L 180 Degree curve only-left to right $ 995 PP-90Curve 90 Degree curve only-right to left (Standard) $ 850* PP-90Curve-L 90 Degree curve-left to right $ 895 PP Degree curve with 24 straight $ 985* PP Degree curve with 36 straight $1,195* *Asterisk indicates item in stock Page 27

28 CONVEYORS-GRAVITY ROLLER-STRAIGHT-LIGHT DUTY MODEL NO. DESCRIPTION PP-24GR 24 Long x 15 wide, Straight conveyor section with new H $350* style leg supports, Adjustable legs from (End stop included) PP-36GR 36 Long x 15 wide straight section with adjustable legs $395* PP-72GR 72 Long x 15 wide straight section with adjustable legs $695* ¾ diameter aluminum rollers on 1 ¼ centers, will transfer very light packages CONVEYORS-GRAVITY ROLLER-STRAIGHT-HEAVY DUTY MODEL NO. DESCRIPTION PP-60HD-GR 15 wide 5ft Straight section with H style adjustable legs, $550* PP-120HD-GR 15 wide 10ft Straight section with adjustable legs $850* PP-60HD-GR 18 wide 5ft Straight section with adjustable legs $595* PP-120HD-GR 18 wide 10ft Straight section with adjustable legs $950* PP-60HD-GR 24 wide 5ft Straight section with adjustable legs $650 PP-120HD-GR 24 wide 10ft Straight section with adjustable legs $1,050 *Asterisk indicates item in stock 1 3/8 dia galvanized steel rollers on 1.5 centers on all conveyors,, Spring loaded axle allows roller to be easily removed or inserted. H style Leg supports are adjustable from 26 to 38 Page 28

29 CUTTING MACHINES Hot and Cold, Straight and Angled for Ribbon, Velcro, Labels Etc. TBC-50 TBC-50R TBC-52RT TBC-53R Model Velcro Cutting TBC-50 Velcro Cold Cut $3,495 TBC-50R Velcro Round Cut Cold $3,595 TBC-50RT Velcro Round and Straight Cut-Cold $3,895 TBC-53R Velcro Extra Large-Cold $4,295 TBC-55HX TBC-50HX TBC-50H Model Ribbon Cutting TBC-55HX Angle Cut-Hot $7,795 TBC-50H Hot Cut $4,795 TBC-50HW Hot Wire Cut-No Fray $5,995 TBC-50SH Model Label Cutting TBC-50S TBC-50SH Woven Label Cutter with Sensor-Hot $5,895 TBC-50S Printed label Cutter with Sensor-Cold $4,995 TBC-554L Wide format material cutter up to $9,450 Page 29

30 DROP SEALERS / BAG OPENERS PP-615/402 Drop Sealer and Bag Opener PP-402 Bag Opener Model PP-615/402 Combination Drop Sealer and Bag Opener all on $6,450* one frame! 15 wide seal bar, pneumatically operated drop sealer with photo eye activation and bag opener combination machine. 110 volt, 2 CFM at 80 PSI air required, Max jaw opening 6, Max bag length 20 PP-615/402-SS Stainless Steel frame construction $10,500 (Wipe Down) PP-620/405 Same as above with wider seal jaw and larger bag $7,995 opener. 20 Wide Seal Bar, Max jaw opening 8, Max bag length 30 PP-615 Drop Sealer Sold Separately $5,495 PP-620 Drop Sealer Sold Separately $6,795 PP-402 Bag Opener sold separately $1,150* PP-405 Bag opener sold separately $1,450 Air Expeller-Compression Plate $ $3,495* Incline Conveyor-18 W x 4 ft long-paddle style belt helps move product up conveyor. PP-36LS 36 Diameter Lazy Susan turntable PP-48LS 48 Diameter Lazy Susan Turntable $1,395* $1,895* Page 30

31 FILLING EQUIPMENT- AUGER FILLERS AUGER FILLERS AG95-S Standalone Auger Filler AG95-L With screw conveyor Model AG-95-S Standalone Auger Filler with 7 touch screen, Omron controller, servo control, flow boosting agitator. Fill range: g, (1.7-35oz) 50 cycles per minute, accuracy +/ % AG135-S Same unit as above with larger capacity Fill range: g (3.5-70oz) AG50-L Auger filler for powders (filler to integrate) Fill range: 1-50g ( oz) AG95-L Auger filler for powders, (filler to integrate) Fill range: g (1.7-35oz) AG135-L Auger filler for powders (filler to integrate) Fill range: g (3.5-70oz) $15,250 $17,985 $ 4,465 $11,950 $15,250 Page 31

32 FILLING EQUIPMENT-PISTON FILLERS LP-Series Liquid Piston Fillers The LP Series is a volumetric piston filler that is Wash Down design and able to fill products such as liquid soaps, hair gel, jams, BBQ Sauce etc. Filling controlled by timer or footswitch, stepless volume adjustment, Stainless Steel Construction-No electrical required! Model LP-60 Stainless Steel construction, Hopper volume 10 litre (2.5 gal), $3,450 air required, Filling speed PPM Accuracy +/- 2%, fill range 3-60ml (.1-2oz) LP-120 Same as above with fill range of ml (.3-4oz) $3,650* LP-250 Same as above with fill range of ml (.6-8oz) $3,995* LP-500 Same as above with fill range of ml (1.5-16oz) $4,895 Hopper Agitator with frequency regulator $2,150 Hopper with heater package and temperature controller to heat product $1,800 up to a more liquid consistency for easier filling and increased fill speeds Hopper level sensor $ 995 Lid press-heavy stainless steel plate forces non flowing product down $ 225 hopper *Asterisk indicates item in stock Page 32

33 FRICTION FEEDERS/ BATCH COUNTING/COLLATING SYSTEMS V-1000 V-2000 V-710BC Model V-1000 Min: 2.5 x 3 Max: 12 x 12 Continuous feeder for ink jet printing, tabbing and labeling. V-2000 Min: 2.5 x 3 Max: 20 W x 18 L Continuous feeder for ink jet printing, tabbing and labeling V-710BC One shot feed and batch counting at 100 cycles per minute. Min: 3.75 x 3.75 Max: 12 x 12 $3,500 $5,900 $6,500 ST-1250EX Pneumatic ST-1250EX Pneumatic ST-1250 Retractable Dropper Model ST-1250 Retractable Call for Pricing Call for Pricing Page 33

34 Reciprocating Placer Rotary Placer Tray Denester Model Reciprocating Placer- Min: 1.5 x 1.5 Max: 10 x cycles per minute Rotary Placer Min: 1.5 x 1.5 Max: 6 x 6 Up to 400 cycles per minute Tray Denester- Min: 1.5 x 1.5 Max: 20 W x 10 H Up to 45 cycles per minute Call for Pricing Call for Pricing Call for Pricing Page 34

35 Horizontal FFS Flow Wrapping Machines Low cost Entry Level. Great for wrapping cookies, muffins, candy bars, biscuits, brownies, etc. Model PM-C250 Shown Model Description PM-C250 PM-C250 IVC Inverted PM-C350 PM-C350H PM-C350HL Great entry level horizontal FFS Flow Wrapping Machine with mechanical drive and touch screen menu with auto diagnostics with error display, product counter, 7 ft flighted infeed conveyor. One step adjustment of bag length. Speeds from 40 to 100ppm Seal jaw width: 4.3 (110mm) Bag length: 2.5 (65mm) to 11 (280mm) Bag width: 1.25 (30mm) to 4.2 (110mm) Max film width: 3.5 (90mm) to 9.8 (250mm) Max prod height: 1.5 (40mm) Inverted film feed design where the film comes up from the bottom and the fin seal is on top. Great design for feeding small items or item that are difficult to transport or transfer on a flighted infeed conveyor. The flight pusher will push the product onto the film and then the film carries the product into the seal jaw. Same machine as C-250 described above, but will accommodate larger package sizes. Seal jaw width: 7 (178mm) Bag length: 2.5 (65mm) to 7.25 (190mm) Bag width: 2 (50mm)to 6.25 (160mm) Max film width: 5 (130mm) to (350mm) Max prod height: 1.5 (40mm) Max Pkg Height: 2.5 /Bag Length Max Pkg Height: 2.5 / Bag Length $19,950* $23,000 $22,500* $24,500* $25,500 Page 35

36 PM-C350-IVC Inverted Inverted film feed design where the film come up from the bottom and the fin seal is on top. Great design for feeding small items or item that are difficult to transport or transfer on a flighted infeed conveyor. The flight pusher will push the product onto the film and then the film carries the product into the seal jaw $24,500 PM-C450 Same machine as C350 described above, but will accommodate larger package sizes. Seal jaw width: 9 (229mm) Bag length: 5 (130mm) to 17.5 (450mm) Bag width: 2.2 (60mm) to 7.8 (200mm) Max film width: 6 (150mm) to 17.7 (450mm) Max prod height: 3 (80mm) $27,500* PM-C450-IVC Inverted Inverted film feed design where the film come up from the bottom and the fin seal is on top. Great design for feeding small items or item that are difficult to transport or transfer on a flighted infeed conveyor. The flight pusher will push the product onto the film and then the film carries the product into the seal jaw $29,500 PM-450R Box motion (reciprocating seal head) designed for taller package sizes. Will accommodate packages up to 100mm (4 tall). Seal Jaw width: 9 Bag length: 4.75 (120mm) (450mm) Bag Width: 1.6 (40mm) 7.8 (200mm) Max Pkg Height: 4 (100mm) Max Film Width: 17.7 (450mm) Machine Speed: PPM $35,500 PM-C600H Same machine as C450 described above, but will accommodate larger package sizes. Seal jaw width: 11 (279mm) Bag length: 5 (130mm) to 17.5 (450mm) Bag width: 2.5 (65mm) to 10.5 (275mm) Max film width: 6 (150mm) to 23.5 (600mm) Max prod height: 4 (100mm) Machine Speed: PPM $39,500 *Asterisk indicates item in stock Page 36

37 PM-C675R Box Motion / Reciprocating Seal Head that will accommodate taller package sizes. Seal jaw width: 11 (279mm) Bag length: 4.75 (120mm) to 17.5 (450mm) Bag width: 2.5 (65mm) to 7.8 (200mm) Max film width: 26 (660mm) Max prod height: 5 (130mm) Machine Speed: PPM $42,950 Optional Accessories Stainless steel frame construction $ 4,600 Photo electric eye for printed film Included All color photo sensor $ 595 Adjustable film forming plow $ 895 Dual crimp jaws $ 695 Powered Discharge Wheel on Exit Conveyor-Helps to Separate Products $ 950 Seal jaw sensor-keeps jaws from hitting product $ 1,050 Gas flush-control valves and pipes $ 895 Gusseted bag device $ 850 Plastic product carriers $ 650 Single head label applicator $ 9,950 Dual head label applicator $16,500 Hot Ink Roller Coder (Print area 18 characters x 11 lines) $ 2,150 Hot Ink Ribbon Coder-THR40A (typeset 2x4mm) $ 3,950 (Includes ribbon alarm) U2 Pro Ink Jet Printer-Includes mounting hardware (1/2 print height and 600 dpi) $ 4,650 *For printing on clear film only! Video Jet Thermal Transfer printer, 8.4 Touch Screen, 32mm print head at $ 8, DPI, supports 9 types of bar codes, 0-750mm/sec print speed, 32mm x 200mm print area, Clarisuite software included Thermal transfer ribbon 33mm W x 500m L (25 roll min) $35/roll Video Jet Thermal Transfer Printer, same as above with 53mm wide print $10,500 head. Thermal transfer ribbon 55mm x 900M (25 roll min) $102/roll Extended Infeed Conveyor-Std length 6.5ft (2 meters) Add 1 meter (3ft) for a total length of 9.5ft (3 meter) $ 1,295 Page 37

38 Horizontal FFS Flow Wrapping Machines High Quality Mechanical Drive Horizontal FFS Flow Wrapping Machine * Model M-5247 Shown Model Description M-5247 Horizontal FFS Flow wrap machines with mechanical drive. Mitsubishi PLC control, Omron temperature controls, powder coat finish, motorized bag length adjustment. Overload protection on end seal jaw with automatic disengage variable speed inverter, bag counter display, adjustable product guide rails, top hold down belt, discharge brush to stabilize product on discharge transfer 7ft flighted infeed conveyor. $30,750 Speed from 30 to 150ppm Bag length: 2.75 (70mm) to (350mm) Max film width: 18.5 (470mm) Max prod width: 7.5 (190mm) Max prod height: 1.18 (30mm) or 2.36 (60mm) or 3.54 (90mm) M-5261 Same machine as described above with larger capacity $35,450 Speeds from 20 to 150ppm Bag length: 5.1 (130mm) to 17.7 (450mm) Max film width: 24 (610mm) Max prod width: 10.4 (265mm) Max prod height: 3.9 (100mm) Page 38

39 Horizontal FFS Wrapping Machines High Speed Servo Drive Horizontal Flow Wrap machines *Model S-5647 Shown Model Description S-5547 Horizontal single (1) axis servo motor drive flow wrapper with Siemens PLC controller, 5.7 color touch screen with 50 program memory, photo eye for printed film, adjustable film former, 7.5ft (2.3m) flighted infeed conveyor, European CE safety standard. Overload protection on end seal with automatic jaw disengage function. Speeds of 30 to 250ppm Bag length: 3.5 (89mm) to 15.7 (400mm) Max prod width: 7.5 (190mm) Max film: 18.5 (470mm) Max prod height: 30mm (1.18 ), 60mm (2.4 ) or 90mm (3.5 ) S-5547-IV Same machine as above with inverted film feed (film feeds from bottom roll for better product transfer S-5561 Same as above with larger capacity, (1) axis servo drive Speeds of ppm Bag length: 5.11 (130mm) to (450mm) Max film width: 24 (610)mm Max prod width: 10.4 (265mm) Max prod height: 30mm (1.18 ), 60mm (2.4 ) or 90mm (3.5 ) S-5647 Horizontal (3) axis servo motor drive flow wrapper with Siemens PLC control module, 10.4 color touch screen with 100 program memory, 3 axis servo motor for infeed, fin seal and end seal. Over-load protection for end seal with automatic disengage, photo eye for print registration. Speeds of 30 to 250ppm Bag length: 3.5 (90mm) to (450mm) Max film width: 24 (610mm) Max prod width: 10.4 (265mm) Max prod height: 30mm (1.18 ), 60mm (2.4 ) or 90mm (3.5 ) $38,950* $61,850 $44,175 $50,900 S-5647 (4) axis servo-same as above with 4 servo motors $54,675 S-5661 Same as above 4 axis servo drive with larger capacity. Prod speeds of 20 to 170ppm Bag length: 5.11 (130mm) to (450mm) Max film width: 24 (610mm) Max prod width: 10.4 (265mm) Max prod height: 30mm (1.18 ), 60mm (2.4 ) or 90mm (3.5 ) S-5747-SB3 5 Axis servo drive with Allen Bradley PLC, 10.5 AB color touch screen with 100 program memory, Attachless Smart Belt Infeed, no product/no cycle, Dual film reel holders, speeds of PPM $56,500 Call for pricing Page 39

40 *Asterisk indicates item in stock Horizontal FFS Flow Wrapping Machines S-5547-SH Model S-5547-SH Shown High speed flow wrappers for shrink film application. (Choose from static lap seal, Trim seal or fin seal) MODEL DESCRIPTION Single axis servo motor drive flow wrapper for shrink film. Uses vacuum belt drive, Siemens PLC controller with 50 program memory, 5.7 touch screen panel for easy set up and change over, overload protection with automatic disengage of end seal jaws. Speeds from 30 to 120ppm $56,500 S-5561-SH Bag length: 6 (150mm) to 15 ¾ (400mm) Max film width: 18.5 (470mm) Max prod width: 7.5 (190mm) Max prod height: 2 ¾ (70mm) Same machine as described above with larger capacity Production speed: 30 to 90ppm $59,500 Bag length: 6.69 (170mm) to (450mm) Max film width: 24 (610mm) Max prod width: (265mm) Max prod height: 2 ¾ (70mm) * Higher package heights available upon request* Page 40

41 Horizontal FFS Flow Wrapping Machines Options DESCRIPTION Stainless Steel frame construction M Series $6,250 Stainless Steel frame construction- S Series $8,495 Plastic carrier blocks $ 795 Date coder-pneumatic drive-time delay-carbon ribbon coder, 2 position X or Y Print position Needs to be changed when you change machine speed. Date coder-stepper motor drive Encoder positioning-carbon ribbon coder, prints in machine direction only, Alarm when ribbon is finished. $2,800 $3,950 Date coder-stepper motor drive-encoder positioning-hot ink Coder, 2 position print X or Y direction. $3,950 U2 Pro Ink Jet Printer (1/2 print height and 600 DPI) (*For use with clear film only) $4,650 Videojet Dataflex Thermal Transfer Printer (32mm print head) $8,500 Videojet Dataflex Thermal Transfer Printer (53mm print head) $10,500 Center seal pre-heater (for better sealing at high speed) $2,300 End seal euro slot hole punch $1,295 Gas flush device (control valve & pipes) $1,675 Auto-Labeling unit-will apply pressure sensitive label to top of package $10,850 Additional film roll holder $1,500 End seal gusset device $2,495 Adjustable film forming box $2,495 Fixed forming Box $ 395 Hopper feed-single tower, Manual loading of product into hopper, flight lugs picks $3,000 product from hopper and places onto infeed conveyor Dual/Twin end sealing jaws to reach speeds of 250 PPM $2,000 Triple Sealing Jaws $3,950 Top chain transfer conveyor on end seal area-helps to transfer small 60mm (2.5 ) pkgs $1,895 Right to left (mirror image) machine configuration $1,800 Top chain transfer conveyor on 2 meter infeed with multi belt transfer between in-feed and bag former (available on servo models only) $16,500 No product / no cycle available on 3 & 4 axis servo machines only $6,500 Double pitch in-feed conveyor with removable pushers for wrapping packages that have $1,995 a large length range ( 3 axis servo machine only) Mechanical and 1 axis servo machines require gear change $1,395 No product Automatic stop/automatic re-start( available on M series machines only) $1, volt power $ 695 Add Servo motor drive on S series machines (ea) $4,600 Automatic film splicer with dual roll holder models $10,950 Cross Belt Auto Feeding Conveyor-Product transfers at 90 degrees $23,950 Allen-Bradley PLC Micrologix 1400 controller with AB 5.7 HMI $4,000 Extended Infeed Conveyors- Std length 2.3 meters/7 FT Add 1 meter 3 ft/total length of 10 ft Add 2 meters 6 ft/total length of 13 ft Add 3 meters 9 ft/total length of 16 ft $2,550 $5,100 $7,650 Page 41

42 Horizontal FFS Flow Wrapping Machines H-303 Series Horizontal FFS (Form, Fill and Seal) The model H-303 is a horizontal form fill and seal machine designed for cosmetics, chemical, snacks, candy, granular, liquid or powder products in a 3-side or 4-side seal bag. It can make a bag up to 140mm W (5.5 ) x 180mm L (7 ) Model Description H-303 Horizontal FFS machine for cosmetics, granular, liquid or powder products Servo motor film drive system. 1 fill station 7 Omron touch screen HMI. Mitsubishi PLC, photo eye, auto diagnostics, Quick change 3 side or 4 sided seal, stand up pouch with zipper, can use auger filler to fill bag. Production speeds of BPM Fill range: 160ML (up to 3.38 oz) Bag length: 2.95 (75mm)-7 (180mm) Bag width: 2.4 (60mm)- 5.5 (140mm) $49,500 H-503 Same machine as above with larger bag size and fill volume, 2 fill stations. Production speed BPM Fill Range: 400ml (13.5oz) Bag Length: 2.85 (75mm) 8.85 (225mm) Bag Width: 2.56 (65mm) 7 (180mm) H-505 Higher speed with smaller fill volume- 2 filling stations with the use of dual head fillers with production speeds of BPM Fill volume: 60ml (2 oz) H-511 Stand up pouch model with Zipper and dual filling stations. 50 BPM $63,500 $89,950 $134,000 Page 42

43 Optional Accessories Description Stainless steel frame construction $6,000 Hot stamp printer (3 lines of type 1.3 w) $1,600 Additional film forming collar $1,995 Exit conveyor with incline and food grade mesh belting $2,550 Gas flush device $1,650 Side gusset option on bag $2,085 Euro slot hole punch $2,195 V shaped tear notch for easy bag opening $1,695 Dimple plate structure on metal $1,575 AUGER-Options Vibration device during filling to avoid product accumulation $1,450 Powder dust extractor $3,950 Page 43

44 I BAR SEALERS & TABLE TOP L SEALERS Deluxe I Bar Impulse Sealer with seal timer Unit includes heat gun and starter roll of film Model PP-13DS Deluxe 13 seal bar with impulse light that goes out when finished $360 PP-18DS Deluxe 18 seal bar with impulse light that goes out when finished $380* PP-24DS Deluxe 24 seal bar with impulse light that goes out when finished $390* PP-32DS Deluxe 32 seal bar with impulse light that goes out when finished $425 PP-40DS Deluxe 40 seal bar with impulse light that goes out when finished $465 Impulse Sealer includes heat gun, seal pad and film PP-450HL Includes film roll stand with perf wheels Model PP-300HL 12 x 18 L Sealer w/film stand $ 795* PP-450HL 18 x 18 L Sealer w/film stand $ 895* PP-600HL 24 x 32 L Sealer w/film stand $1,250* Heat Gun sold separately $ 65* * Heat gun or table top shrink tunnel sold separately *Asterisk indicates item in stock Page 44

45 IMPULSE SEALERS PP-200H Hand Type Poly Impulse Sealers Model Size PP-200HC with cutter PP-200H 8 $70* *PP-200HC 8 $135* Spare parts kit-200 $16* PP-300H 12 $105* *PP-300HC 12 $165* Spare parts kit-300 $17* PP-400H 16 $135* PP-400HC 16 $195* Spare parts kit-400 $20* PP-500H 20 $175* PP-500HC 20 $225* Spare parts kit-500 $29* * HC Model includes cutting knife. *Also available with 5mm wide seal at additional cost *Spare parts kit includes 2 sealing elements, 2 Teflon Covers, 2 Teflon Adhesives E1500S Model E1000S 15 Pneumatic Impulse Sealer, ¼ seal, Clean room compatible, LCD display, pressure gauge, No Pinch safety jaw, Electronic foot switch, 110v (Air required) E Seal length E Seal length E Seal length E Seal length AVP-20 Foot pedal operated pneumatic impulse sealer, 20 seal length. (Air required) AVP-20 $1,345 $1,385* $1,495* $1,558 $1,810 $1,328 Page 45

46 IMPULSE AND CONSTANT HEAT SEALERS PP-450F PP-450FC PP-400THS Foot Pedal poly Sealer Foot Sealer w/cutting Knife Constant Heat Model PP-300F 12 wide seal jaw, 1/8 (2mm) $295* PP-300THS Constant Heat $425 Spare parts kit-300 $ 25* PP-450F 18 wide seal jaw 1/8 (2mm) $342* PP-450FC with cutting knife $375* PP-400THS 16 Constant Heat $475* Spare parts kit-450 $ 28* PP-600F 24 wide seal Jaw $395* PP-600FC with cutting knife $425 Spare parts kit-600 $ 33* PP-750F 30 wide seal jaw $550 Spare parts kit-750 $ 38 PP-900F 35 wide seal jaw $750 *Also available with 5mm wide seal at additional cost Spare Parts Kit Includes: 2 elements, 1 ft long roll of Teflon and 2 Teflon adhesives *Asterisk indicates item in stock Page 46

47 INDUCTION SEALERS Model AF-500W Model CS-501 Model DESCRIPTION AF-500W CS-501 Semi-Automatic Induction Cap Sealer suitable for non-metal container such as glass, plastic bottles ABS, PE, PET, PP, PS, PVC. Cap size mm (500W power) 220 V, footswitch operated. Semi-Automatic Capping and Foil Sealing Machines. Will screw on cap and foil seal, For non-metal containers such as glass, or plastic bottles, ABS, PE, PET, PP, PS, PVC. Cap range from 22-40mm (1000W) 220V $2,995 $5,335 AF-2000W Fully Automatic AFC-2000W Model DESCRIPTION AF-2000W AF-3000W AFC-2000W AFC-3000W Fully Automatic Induction sealer with stand only- (for customers who already have conveyor) water cooling system, 2000W power 220V 12A Cap Dia 10-55mm, Fully Automatic Induction sealer with stand only- (for customers who already have conveyor) water cooling system, 3000W power 220V 15A Cap Dia mm, Fully Automatic Induction sealer with Conveyor. Water cooling system, 2000W power 220V 12A Cap Dia 10-55mm, Belt Speed 20-60m/min, Metal belt conveyor Same unit as above with 3000W power, Cap size mm, 220 v 15A $8,350 $9,650 $11,600 $12,950 Page 47

48 Ink Jet Systems U2 Printer with HP Technology, uses 42 cc Ink Cartridges, can print on boxes or structured films. Will print 4 lines at 1/8 each or 2 lines at ¼ each or 1 line at ½ Model DESCRIPTION U2 Ink Jet Printer $1,695* NP4 Ink Cartridge $129/ea* U2 Mobile Hand Held Ink Jet Printer-The world s most compact mobile printer, lightweight only 2.2 lbs, 7 Hour battery life, remote keypad with 2.8 color display. Model DESCRIPTION U2 Mobile Hand held ink jet printer $1,995* *Asterisk indicates item in stock Page 48

49 L SEALERS ECONOMY VERSION FULLY AUTOMATIC SOLD WITH TUNNEL Model Economy PP-5600 Combo (L Sealer and Tunnel) Stainless Steel Frame Construction Made for USDA Approval-Wipe Down Only PP-5600E Economy L Sealer Sold Separately Seal Size L x W x H 25 x 19 x 4 Fixed belt speed 60 FPM 20 PPM Seal area 25 L x 19 W x 4 PP-5600 Economy System Description Economy Combination Fully Automatic L Sealer and Tunnel sold as a set, Delta PLC, Delta 5 Color Touch Screen with 12 program memory, Speeds to 20 PPM, Fixed belt speed 0-60 FPM, Manual motorized adjustments of inverting head and infeed conveyor position, Motorized scrap windup with alarm, pinwheel hole punch, Hot knife seal bar, Casters Includes separate shrink tunnel: Model PP L x 18 W x 8 H opening. PP-5600E Economy Fully automatic L Sealer with fixed belt speed, maximum speed of 20 PPM. $23,995 $39,950 $19,950 Page 49

50 Fully Automatic L Sealer with Attached Tunnel PP-5300 Combo APA Automatic Product Adjustment PP-5600 Combo Now with Vertical Seal Head Design Model Standard PP-5300 Combo PP5300CS Combo-SS Seal Size L x W x H 19 x 16 x 6 Variable speed drive FPM, 40 PPM Stainless Steel Description Combination Fully Automatic L Sealer and tunnel built on same frame, Delta PLC, Delta 7 Color Touch Screen with 12 program memory, Speeds to 40 PPM, Variable speed drive- 0 to 95 FPM, product staging,, APA -Machine will automatically adjust infeed conveyor and inverting triangle, jam alarm, Motorized scrap windup with alarm, pinwheel hole punch, Hot knife seal bar, Locking casters Same machine as above in stainless steel. Mfg for USDA approval Wipe down only $32,500* $57,550 PP5600CS Combo 25 x 19 x 7 Same unit as above with large seal area 25 L x 19 W PP5600CS Stainless Steel Same machine as above in stainless steel. Mfg Combo-S.S for USDA approval Wipe down only *Asterisk indicates item in stock $34,500* $56,925 Page 50

51 L SEALERS - FULLY AUTOMATIC cont d PP-5600 *Vertical Seal Head Design with Center Seal and PP-36F Flighted infeed shown Model Seal Size L x W x H Description PP-5600CS 25 x 19 x 7 Delta PLC, Delta 7 color touch screen with 12 program memory, APA Automatic product adjustment-inverting head and infeed conveyor will automatically adjust to package size, Variable speed drive- 0 to 110 FPM, APC- Automatic Product Clearing, Speeds to 40 PPM, Self diagnostics, motorized scrap windup with alarm, product staging, multi pack option, pinwheel hole punch, hot knife seal bar, locking casters $26,500* PP-5600CS-SS Stainless Steel Same machine as above in stainless steel. Wipe down only, Mfg. for USDA Approval $43,680 *Asterisk indicates item in stock Page 51

52 L SEALERS - FULLY AUTOMATIC cont d PP-9070CS Shown Now with Vertical Seal Head Design Model Seal Size L x W x H Description PP9070CS 34 x 24 x 10 APA Automatic product adjustment-infeed conveyor and inverting triangle will automatically adjust to package size from one touch control panel. $32,500 Speeds of 30 to 40 PPM, 4 minimum package length. Designed for use with polyolefin or polyethylene films. Maximum package height 8. Delta 7 color touch screen with 12 Program memory. Center Seal Standard. PP9070CS-SS Stainless Steel Same machine as above in stainless steel Mfg for USDA approval-wipe down only Inquire For Pricing on shrink tunnels to match these systems, please refer to the tunnel price sheets. Page 52

53 Options for Automatic L Sealers Closing Conveyor $1,950 Print Film Registration $1,875 Left to Right Product Flow $1,050 Export Crating $ 500 Non-standard voltage $1,200 Pneumatic Hole Punch Single Hole 3/16 $1,295 Dual Pneumatic Hole Punch-Two 3/16 Diameter Holes $1,895 PP-36B 3 ft Belted infeed conveyor, variable speed, adjustable side guides $2,850 PP-72B 6 ft Belted infeed conveyor, variable speed, adjustable side guides $3,800 PP-36F 3 ft Flighted infeed conveyor, variable speed, adjustable side guides $3,500 PP-72F 6 ft Flighted infeed conveyor, variable speed, adjustable side guides $5,995 6 Flighted Paddle style infeed conveyor with 3 to 6 wide paddle widths available, this conveyor is great for pushing multi product down the conveyor at one time $6,500 Poly cord belt infeed conveyor for easy cleaning $2,500 Pneumatic product hold down for light weight products $1,995 Pneumatic air expeller-helps evacuate air from bag prior to sealing $2,150 Page 53

54 L SEALERS SEMI-AUTOMATIC PP-1519L Shown ECONOMY SERIES: L Sealer with Band Seal Technology (15 W x 19 L) L Seal area. Comes with Pin Wheel Hole Punch, Legs with casters. All units are 110 volt. Models PP1519L and PP1519LM available in a Table Top Version, deduct $ for leg kit. Model PP-1519L L Sealer Only $2,195* PP-1519LM (Magnet Hold Down) $2,795* PP-1519LMC (Magnet Hold Down and Power Discharge Conveyor) $3,595* *Asterisk indicates item in stock PP-1622MK PP-1622MKA-V-PI Standard Series: Semi-Automatic L Sealer with magnet clamping, powered takeaway conveyor, cylinder arm return, Micro Knife seal system standard, stainless steel compensator assembly, automatic cycle timing, pin perf, Stainless steel film clamps, casters. Micro Knife *(MK) available on PP-1622 and PP-2028 models only. (Wire sealers use laminate strips under seal wire) Model Seal Dimensions Power Phase Volts Amps 16 W x 22 L PP1622-W or MK Wire or Micro Knife $4,900* PP1622-A Air operated-pivots from back-wire or Micro Knife $6,495 PP1622-MKA-V Micro knife-air Operated- Vertical Seal Head with 8 $7,695 opening moves straight up and down. PP1622MKA-V-PI Micro knife-air Operated- Vertical Seal Head with 8 $9,795 opening-powered film unwind and Adjustable film inverting head-seal head moves straight up and down. PP1622-HK Hot Knife-Constant heat with independent digital $6,500* temperature controls. PP1622-MK-SS # 304 Stainless Steel frame construction-wipe down $8,950 *Asterisk indicates item in stock Page 54

55 L SEALERS SEMI-AUTOMATIC cont d. Model Seal Dimensions PP-2028MK Shown Power Volts Amps Phase 20 W x 28 L PP-2028W or MK Wire or Micro Knife $6,500* PP-2028A Air Operated-Pivots from back -Wire or Micro Knife $7,900 PP-2028A-V Air Operated-Vertical seal head with 10 opening, seal $8,800 head move straight up and down, Micro knife or wire PP-2028HK Hot Knife- Constant heat with independent digital $7,900 temperature controls. PP-2028-SS #304 Stainless Steel frame construction-wipe down $10,900 Model Power Volts Seal Dimensions Phase Amps 20 W X 40 L PP-2040W Wire Only $7,500 PP-2040A Air Operated-Std pivots from back $8,700 PP-2040A-V Air Operated-Vertical seal head-moves straight up and down $9,900 PP-2040HK Hot Knife- Constant heat with independent digital temperature controls. $8,900 PP-3040W Shown Model Seal Dimensions Power Volts Amps Phase 30 W x 40 L PP-3040W Wire Only $8,850* PP-3040W-A Wire- Air Operated-Std pivots from back $10,500 PP-3040W-A-V Wire- Air Operated-Vertical seal head with 12 opening $12,750 PP-3040HK Hot Knife $10,950 PP-3040-SS # 304 Stainless Steel-Wipe down Inquire PP-3050W Wire Only $10, W x 50 L PP-4050W Wire Only $14,500 Page 55

56 L SEALERS SEMI-AUTOMATIC cont d. PP-48ST PP-76ST PP-77ST (Larger Seal Area) All-in-One Sealer/Shrink Chamber: Compact L Sealer and Hooded Shrink Chamber in one complete unit. Machine comes with Band Seal Technology, Dual Magnetic Hold Down for seal and shrink Cycle, Pinwheel Hole Punch, and locking Casters. PP-48ST add $ for 220 volt MODEL SEAL DIMENSIONS POWER VOLTS AMPS PHASE PP-48ST 12 W x 18.5 L 110/ / 10 1 $2,650* PP-76ST 16 W x 22 L $3,575* PP-76STC Power Discharge Conveyor $4,995 PP-76ST-SS Stainless Steel $4,575 PP-77ST 20 W x 30 L $5,500 *Shown with optional PP curved conveyor PP-1519EC Series Economy Combination Machine With Micro Knife Technology Comes complete with console leg kit, casters, pin wheel hole punch and 8ft power cord Size: Size: Model Sealer Tunnel PP-1519EC (Economy Combo) 15 W X 19 L 20 L X 16 W X 6 H $4,395* PP-1519EC-SS (Stainless Steel) $6,850 PP-1519ECM (Economy Combo with Magnet Hold $4,995* Down) PP-1519ECM-SS (Stainless Steel) $7,750 PP-1519ECMC (Economy Combo with Magnet Hold $5,995* Down and Powered Discharge Conveyor) PP-1519ECMC-SS (Stainless Steel) wipe down. $9,250 PP Gravity roller curved conveyor $1,195* 180 degree curved conveyor with 24 straight section *Machines available in (110 volt-20 amp) or (220 volt-10 amp) service. * Add $ for 220-volt machine / * Add $ for 8 tunnel height* 110-volt unit comes with power cord and plug. 220 volt units comes with power cord NO Plug Page 56

57 L SEALERS SEMI-AUTOMATIC cont d. L Sealer and Tunnel Sold as a Set Model PP-1622MK & PP *Shown with optional PP gravity curved conveyor L Sealer comes with dual magnets, power discharge conveyor, casters and pin wheel hole punch. Tunnel has digital temperature control, variable air velocity, casters and leveling pads PP-1622MK Sealer and PP Tunnel sold as set $7,995* Optional: PP degree Curved Conveyor with 36 straight section $1,395* PP1622MK-Combo Shown *Shown with optional PP gravity curved conveyor Combo unit ships complete with dual magnet hold down, power discharge conveyor, casters, pin wheel hole punch. (L Sealer moves side to side and tunnel raises and lowers with crank handle) Model L Sealer and tunnel built on common frame. L Sealer adjusts from side to side while tunnel adjusts up and down. One power source 220V, 1 phase, 45 amps. PP1622MK-Combo (Micro Knife) $ 8,995* PP1622MK-Combo-SS #304 Stainless Steel-Wipe down. $14,950 PP1622HK-Combo (Hot Knife) $10,450 PP1622MKA-Combo (Micro Knife-Air operated) $ 9,975* Air Operated Dual Push Button Operation with Automatic Cycle Timing PP1622MKA-Combo-SS Air Operated Seal Head, #304 Stainless $15,950 Steel-Wipe down. Optional: PP degree Curved Conveyor with 36 straight section $ 1,395* *Asterisk indicates item in stock Page 57

58 L SEALER ACCESSORIES Description Adjustable Film Inverting Head PP1622 $1,050 PP2028 $1,350 PP3040 $1,850 Powered Film Unwind PP Film $1,050 PP Film $1,500 PP Film $2,000 Product tray-stainless steel PP1622 $ 400 PP2028 $ 535 PP3040 $ 675 Film Rack for PP1622 $ 400 PP2028 $ 475 PP3040 $ 650 Electric Hole punch-3/16 Diameter hole $1,395 Pinwheel Hole punch $ 195 Non-Standard Voltage For U.S $ 995 Left hand sealers $1,050 Paint-Custom color $ 550 Export Crating $ 400 PVC Teflon Diaper Seal Wire Covers $ 350 Remote/Portable Film Scrap Take Up Wheel $ Page 58

59 LABEL DISPENSERS U-25 U-45 U-60 Model U-25 NEW, LOW COST Label Dispenser! Power advance for roll labels to 2.5 width. Tension guide is standard for thin labels. Optional reverse switch available for labels under.5 length/width. With Photo Eye U-45 Power advance for one-up computer forms, or printed labels in rolls 3/8-4.5 wide at 6 per second speed. U-45HS High Speed version 11 per second for any length label! Includes photo eye. U-60 High Speed power advance for larger labels in rolls up to 6 wide, at 9 per second. With Photo Eye $475 $675 $695 $735 Bottle- Matic Model Bottle-Matic 1 16 width cylinder labeling machine. Label any cylindrical object fast and accurately FRONT AND BACK using one single label from.5 to 9 dia.* at speeds of 950 Pcs. Per hour! Bottle-Matic is the perfect machine for labeling your cylindrical objects! It can wrap your bottles, cans, tubes, and jars by simply pressing the footswitch! We can even do tapered objects without customizing! Bottle-Matic 2 16 same unit as described above with the ability to apply 2 individual labels to the front and the back of the same bottle. *Asterisk indicates item in stock MSRP $1,850* $2,325 Page 59

60 LABEL MACHINES-AUTOMATIC ELF-20 Table Top Top Labeler ELF-50 Table Top Wrap Around Labeler MODEL DESCRIPTION ELF-20 Table top- Top labeler $8,945 ELF-50 Table top-wrap around labeler $9,945* PL-211 PL-221 PL-501 MODEL DESCRIPTION PL-211 Top Labeler $14,990* PL-211CS Top/front/bottom clamshell labeler $22,990 PL-221 Top and Bottom Labeler $24,990 PL-231 Bottom Labeler $17,990 PL-501 Vertical Wrap around Labeler $18,990 PL-622 Front and Back Labeler $36,990 PP-610 Top labeler with side folder, includes conveyor-applied label to top and wraps $17,500 label down both sides PP-625 Side Apply Labeler with 16 wide Conveyor $14,995 PP-650 Front and Back Labeler with Tilt Heads for tapered containers $37,500 PP-800 Front or Back panel labeler with conveyor $22,500 PP-850 Side and Back with conveyor $18,500 Optional Item Description Clear Label Sensor $1,350 Elf Hot Stamp Printer $3,950 PL Label Head Tilt Feature $1,950 Allen Hot Stamp Printer (for Pro Series only) $6,495 Page 60

61 LABEL MACHINES PL-10 label head on stand Labeling Heads on Post Mounted Stand MODEL DESCRIPTION ELF Label Width w/controller $7,445 PL Label Width w/controller $9,990 PRO Label Width w/controller $10,995 Stainless Steel Turntables TT mm (24 ) Diameter Turntable $4,995 TT mm (39 ) Diameter Turntable $5,995 Page 61

62 MAIL WRAPPERS / BAGGERS Mailwrapper-280 Mailwrapper-280 w/discharge conveyor *Great for magazines, periodicals, instruction booklets or loose sheets of paper Mailwrapper-280 Width: 7 min 11 max Length: 3 min 17 max Cycle speed of PPM 110 volt, 10 amp Model $7,695 Optional Discharge Conveyor $2,500 Additional forming plow for ¾ product $ 295 SW Poly film rolls for 8 1/2 x 11 x ¼ magazine the recommended film size is 20 x 1.25 mill x 4,600 ft $ Page 62

63 METAL DETECTION EQUIPMENT ENTRY LEVEL-Metal Detector-Hawk 15 BPM-100 Free fall/gravity feed ring type metal detector MODEL Description Max Pkg Size Hawk-10 Hawk-12 Hawk-15 Hawk-20 Hawk-25 Hawk-30 BPM-100 BPM-200 Metal detector-stainless Steel MD w x 3.9 H construction-wipe down, touch MD w x 3.9 H screen control, Fixed Belt speed MD w x 3.9 H at 20m/64FPM, Plastic IntraloxMD w x 3.9 H type belting. Metal detector Metal detector Metal detector Metal detector Metal detector Free fall/gravity feed ring type metal detector Free fall/gravity feed ring type Metal detector MD w x 4.7 H MD w x 4.7 H MD w x 4.7 H MD w x 5.9 H MD w x 5.9 H MD w x 5.9 H MD w x 5.9 H MD w x 7.8 H MD w x 7.8 H MD w x 7.8 H MD w x 9.8 H MD w x 9.8 H MD w x 9.8 H MD w x 9.8 H MD w x 11.8 H MD w x 11.8 H 4 Dia (100mm) Ring opening 8 Dia (200mm) Ring opening $12,750 $12,950 $13,500 $13,950 $12,950 $13,500 $13,995 $13,250 $13,500 $14,150 $14,500 $13,500 $13,950* $14,400 $14,500 $14,750 $14,950 $15,395 $15,500 $15,995 $11,400 $12,750 Optional Item Description Package Reject-Pusher Style with plexi-glass safety cover $1,995 Page 63

64 Pusher rejecter with lockable stainless steel bin $2,500 Package Reject-Air Blast Style $1,295 Stack Light-2 Position, Green on-red Reject with or w/o belt stop $ 350 Beacon Light W/Alarm-When rejects, alarm will sound and red light will appear. $ 450 Variable speed drive $ 595 Stainless steel locking casters $ 350 *Asterisk indicates item in stock S+S Brand of High Quality- Metal Detection Equipment High performance metal detection solutions that include attention to Food Safety within the Sanitary design. Compliance with HACCP and IFS Standards Disassembles in minutes without tools Clean design to IP-65 and IP-67 standards, TCP/IP Network Compatible: Ethernet interface (TCP/IP 100 Mbit/s). WLAN Interface: With integrated aerial ( b/g). Hard Copy Printed Reports: Optional production reports via log printer. USB Interface: Export data from log file or user and system data (available in combination with touch screen option). Barcode Scanner Interface: Serial interface for remote product change using a barcode scanner. Profibus Interface: PLC data highway Construction: 304 stainless steel; angle and tube frame with food approved plastics MODEL NO. DESCRIPTION Genius 12 Wide Aperture x 4 H Conveyor speed up to 200 $18,995 FPM (110volt) Genius Plus Color touch screen 5.7 with larger aperture $19,500 Optional Reject Bin $ 2,400 Page 64

65 POLY BUNDLER/SLEEVE WRAPPERS Model Power Volts/ Amps/Phase SEMI-AUTOMATIC: Sleeve wrapper with attached tunnel. Dual push button operation with pneumatic pusher bar to advance product through seal area, Delta PLC controller, digital temperature controls, pneumatic product hold down, metal mesh tunnel conveyor with cooling fan. Speeds of 5 to 15 PPM depending on product size and film thickness. *SFE-800SA Shown Seal Size Max Roll Width Max pack Lt. Tunnel Size L x W x H SFE-800SA x 29 x 17 $24,650 SFE-1100SA ¾ x 40 x 20 $28,250 SFE-1500SA x 56 x 20 $34,800 SFE-1800SA x 67 x 24 $45,000 Model Power Volts/ Amps/Phase Inline Fully Automatic: Sleeve wrapper with attached tunnel, Delta PLC Controller Power belt infeed conveyor with photo to activate cycle start, pneumatic product hold down, dual power film unwind, metal mesh tunnel conveyor belt, discharge cooling blower. Speeds of 5 to 20 PPM, depending on product size and film thickness. *SFE-800NF Shown Seal Size Max Roll Width Tunnel Size L x W x H SFE-800NF x 27 x 18 $31,500* SFE-1100NF ¾ x 40 x 20 $35,500 SFE-1500NF x 56 x 20 $45,950 SFE-1800NF x 70 x 20 $65,950 *Asterisk indicates item in stock Page 65

66 POLY BUNDLER/SLEEVE WRAPPERS Right angle, Fully automatic, with attached tunnel. *SFE-800AU Shown Right angle infeed conveyor with dual photo eye operation. Multiple stroke count will allow for many different product configurations 3x2, 5x2, 3x5, etc 6, 8, 12, or 24 packs. Delta PLC Controller *Production rate of up to 15 PPM depending on Pkg. Size and configuration. Model Power Volts/ Amps/Phase Seal Size Max Roll Width Max Pack Lt. Tunnel Size L x W x H SFE-800AU x 29 x 17 $35,950 SFE-1100AU ¾ x 40 x 20 $40,600 SFE-1500AU x 56 x 20 $48,500 Optional items 1 Increase Max Package height by 4 SE600 and 800 models only. $ Increase Tunnel height by 4 $ 600 SE600 and 800 models only. 3 Increase tunnel height to 24 $1,850 SE1100 and SE1500 models only 4 Side compression Rollers at end of tunnel chamber to mat down poly film $ Dual Lane diverter-accumulates product and makes one push for higher speeds. $7,500 Page 66

67 POLY BUNDLER/SLEEVE WRAPPERS POLY SHRINK TUNNELS ONLY Chambers Size Model Power Volts/Amps/Phase L W H SE $ 9,450 SE $10,600 SE $12,850 SE $17,250 * ALL TUNNELS FEATURE HEAVY DUTY ZINC PLATED METAL MESH BELTING WITH COOLING TOWER. TUNNEL OPTIONS Description: 1. Increase Tunnel Height by 4 on Models 600 and 800. $ Add 12 length to any tunnel. $1, Increase Tunnel height to 24 on SF-1100 and 1500 models only. $1, Non Standard Voltage 480 volt 3 phase $1,050 Page 67

68 RIBBON BLENDERS / MIXERS Ribbon Blender Ribbon Blades Bottom Valve Discharge Safety Cover MODEL DESCRIPTION MXB cubic ft - 10 gallon or 65 lb capacity - 1 HP Motor $7,995 MXB cubic ft 19 gallon or 71 liters- 125 lb capacity 2 HP Motor $8,995 MXB cubic ft 28 gallon or 180 lb capacity 2 HP motor $11,500 MXB cubic ft 37 gallon or 141 liters- 250 lb capacity 3 HP Motor $13,500 MXB cubic ft 60 gallon or 375 lb capacity 3 HP motor $15,550 MXB cubic ft- 75 gallon or 282 liters- 500 lbs capacity 5 HP motor $17,500 MXS Cubic ft 150 gallon or 570 liters, 1000lb capacity-10 HP motor $24,950 MXS cubic ft 225 gallon or 850 liters, 1,500 lb capacity-12 HP motor $29,950 MXS cubic ft-300 gallon or 1132 liters, 2000 lb capacity-15 HP motor $34,500 All units 220 volt, 3 Phase Power Manufactured in #304 Stainless Steel Page 68

69 SHRINK FILMS-POLYOLEFIN Quick Shrink- 201 General Purpose Multi Layered Shrink Film 50 gauge 60 gauge 75 gauge 100 gauge No Min Order $7.14 $7.14 $7.14 $7.14 CF Length 5,280 ft 4,375 ft 3,500 ft 2,625 ft SW Length 10,560 ft 8,750 ft 7,000 ft 5,250 ft Quick Shrink- IR High Performance Cross-linked Irradiated Film 45 gauge 60 gauge 75 gauge 100 gauge No Min Order $9.30 $8.57 $8.57 $8.57 CF Length 5,820 ft 4,375 ft 3,500 ft 2,625 ft SW Length 11,640 ft 8,750 ft 7,000 ft 5,250 ft 1. All pricing is per inch of width FOB: Ontario, CA 2. Pre-paid freight $2,000 west coast, $2,500 mid west, $3,000 east coast 3. Pre-Perforated film available upon request (add 5% to price) 4. Printed film available in QS-201 and QS-IR (100 roll minimum, 3 color process) Call for pricing *Stock roll widths from 8 to 24 *Film sizes can be mixed to maximize weight for free shipping *Shipping weight is based on 2.4lbs per inch of width *Quick Shrink films comply with FDA requirements for direct food contact. Page 69

70 SHRINK TUNNELS *PP Shown Compact portable Light Duty shrink tunnel with live roller rod conveyor, recirculating air chamber, digital temperature control, AC variable speed drive conveyor, automatic cool down with shut off. Legs and Locking casters. Available in 110 volt or add $ for 220 volt. Table top units available-deduct $100 if ordering table top unit. * New for 2013 viewing window now standard on most models * Model Chamber size Volts Amps. Phase PP v 20 L x 16W x 6 H $2,195* PP v 20 L x 16 W x 6 H $2,445* PP /SS Stainless Steel $4,595 PP PP SS Compact General Purpose shrink tunnel with live roller rod conveyor, AC variable speed drive, variable air velocity control, digital temperature control. Fully re-circulating air system. Automatic cool down with shut off. ½ HP Blower Motor Model Chamber size Volts Amps. Phase PP L x 18 W x 8 H $4,595* PP SS Stainless steel $8,950* PP PP SS Medium capacity production shrink tunnel with live roller rod conveyor, AC variable speed drive, variable air velocity, re-circulating air system, digital temperature control. Automatic cool down with shut off. 1HP Blower Motor Model Chamber size Volts Amps. Phase PP L x 18 W x 8 H $ 6,595* PP SS Stainless steel $11,950* *Asterisk indicates item in stock All stainless steel shrink tunnels designed for wash down only Stainless steel tunnels MFG for USDA Approval Page 70

71 SHRINK TUNNELS PP Shown High capacity production shrink tunnel with variable air velocity, recirculating air system, digital temperature control, live roller rod conveyor. Automatic cool down with shut off. 1 HP Blower Motor. Model Chamber size Volts Amps. Phase PP L x 22 W x 8 H $ 8,250* PP SS Stainless steel $15,250 PP L x 26 W x10 H $ 9,450* PP PP with viewing window High capacity production shrink tunnel with all of the above features, including Dual 1 HP blower motor system, Dual heater banks, Dual variable air velocity controls, live rollers, and a 60 long chamber. Model Chamber size Volts Amps. Phase PP L x 36 W x 10 L $10,500* PP SS Stainless steel $19,500 PP L x 45 W x 10 L $16,950 PP L x 55 W x 20 H $19,500 PP L x 65 W x 20 H $22,500 High Speed Shrink Tunnels High speed shrink tunnel with Dual Chamber controls. Dual 1 HP blower motors, Dual heater banks, Dual air velocity controls, live roller, rod conveyor re-circulating air system. Recommended for high speed applications. *PP shown Model Chamber size Volts Amps. Phase PP L x 18 W x 8 L $11,950* PP SS Stainless steel $21,950 PP L x 22 W x 10 L $14,250 PP SS Stainless steel $25,350 Page 71

72 SHRINK TUNNELS Shrink Bundling Tunnel with (Dual Chamber) Dual 1 HP blower motors, dual heater bank, dual digital temperature control, dead roller conveyor system, variable air velocity, re-circulating air system. Cooling fans on discharge end of tunnel. Model Chamber size Volts Amps. Phase PP L x 22 W x 16 L $10,950* PP L x 36 W x 16 L $11,950* PP L x 26 W x 20 L $12,250 *Asterisk indicates item in stock Page 72

73 Tunnel Accessories TUNNEL ACCESSORIES Added tunnel height 2 increments for model PP $ 275 Added tunnel height 4 increments up to 28 max height $ 525 Non-standard voltage $1,350 Paint Custom colors $ 500 High density roller kit PP $ 275 (rollers on 1 centers, ½ spacing) PP $ 395 PP $ 600 PP $ 550 PP $ 550 PP $ 775 Teflon mesh belt overlay Kit PP $ 295 PP $ 350 PP $ 395 PP $ 495 PP $ 450 PP $ 495 PP $ 585 Stainless steel metal mesh belting PP $ 600 PP $ 700 PP $ 900 PP $ 995 PP $1,150 PP $1,326 Heavy Duty Plastic Falcon Belting PP $1,500 PP $1,900 PP $2,501 PP $2,200 PP $2,500 PP $3,200 TPF system (Thin Package fixture) PP $ 995 Adjustable floating upper roller PP $1,495 assembly will shrink Pkg flat. PP $1,595 l PP $1,595 Export Crating $ 400 Infeed or Discharge Extensions (per foot) $ 600 Side guide rails in tunnel $ 400 Std roller spacing on 1.5 centers = 1 gap Hi Density rollers on 1 centers = ½ spacing Tunnel height from floor to conveyor is 32 Minimum-36 Max Optional Tunnel Conveyor Types Available: Falcon Belting Stainless Steel Metal Mesh Teflon Mesh Belt Hi Density Rollers ½ Space Page 73

74 Shrink Banding Tunnels Great for tamper evident neck bands, safety sleeves, pill bottles, jars, food containers and other similar containers. PP-BS4C (Stainless Steel) MODEL NO. DESCRIPTION PP-BS4C Tamper evident shrink banding heat tunnel for bottle caps with variable speed conveyor. #304 Stainless Steel Frame Tunnel height is adjustable. $6,795 Max bottle Dia: 4 (100mm) Max bottle height: 2-15 ¾ (50-400mm) Machine dimension: 59 L x 18 w x 58 H Electrical: 220 V, 1 phase, 20 amp PP-BS8C Same unit as above with larger tunnel opening of 8 wide $7,350 PP-BS10C Same unit as above with larger tunnel opening of 10 wide $8,950 PP-BS4 PP-BS8 PP-BS10 Same tunnel as above with no conveyor adjustable stand-4 opening Same tunnel as above with no conveyor, adjustable stand- 8 opening Same tunnel as above with no conveyor, adjustable stand- 10 opening $5,500 $5,900 $7,150 Page 74

75 Shrink Banding Tunnels PP-48SBTC-SS (with conveyor) PP-48SBT-SS PP-1230X MODEL NO. DESCRIPTION PP-48SBTC-SS PP-48SBT-SS PP-1230X (With Conveyor) Fully body sleeves or neck bands shrink tunnel with variable speed conveyor and adjustable heat control. Infra red heaters, stainless steel belt, variable speed conveyor with adjustable side guides. #304 Stainless Steel frame construction Tunnel Dimensions: 48 L x 6 w x 6 H Conveyor Dimensions: 79 L x 8 w x 36 H Electrical: 220v 1 phase 35 amp No Conveyor- Shrink banding tunnel for neck bands in stainless steel construction. Will fit over any existing conveyor line. Adjustable crank handle allows for proper tunnel height. Shrink tunnel for full body sleeves or neck bands without conveyor. This unit is designed to fit over most any existing conveyor line. Painted Frame. Chamber size: 59 (1500mm) L x 6.75 (170mm) W x mm) H 220 volt, 1 phase 40 amp $9,500 $6,995 $5,500 PP-1230SBT PP-2535SBT PP-1230 PP-2535 Shrink banding tunnel for fully body sleeves or neck bands. Features live roller conveyor with close roller spacing. Adjustable air dampeners on both sides of chamber. Dual blowers with digital temperature control. Conveyor length is 71 Long, Chamber size is 59 l x 6 ¾ W x 12.5 H Electrical: 220 volt, 1 phase, 50 amp Same tunnel as described above with larger chamber area. Tunnel has 14 wide opening x 12 high. 220 volt, 3 phase $5,800 $6,800 Page 75

76 SHRINK SLEEVE APPLICATOR PP-77 Shown with no Conveyor PP-77 Shrink Sleeve Labeling Machine in Stainless Steel construction, Delta color touch screen. Highspeed shrink sleeve labeling machines are designed for full body sleeve labeling applications, as well as neck and cap banding, tamper-evident applications. The PP-77 is well-suited for a wide variety of industries and applications, although the tamper-resistant neckbander is ideal for beverage, pharmaceutical and cosmetic companies. The shrink sleeve labeling machines are controlled by the Panasonic Servo System, which is based on an advanced brushless motor system that provides fast and accurate output. The high speed system features an adjustable shooter that can be easily set for different label lengths to accommodate all shrink sleeve applications. Voltage 110/220VAC, 50/60HZ 1 Phase 20AMP Dedicated Power 1KW Controls 3.5 Delta Color Touch Screen PLC Panasonic FP0R Cutter Drive Pneumatically Driven Film Feeding Device Sanyo Stepper Motor Film Dispenser - Pneumatically Driven Maximum Sleeve Speed 100 BPM Film Length 120mm (4.72 ) Film Size 22mm 180mm ( ) Range of Bottle Diameter 30mm 90mm ( ) Maximum Bottle Height 350mm (13.8 ) Film Unwind Plate 400mm (15.7 ) Spool Core 127mm 254mm (5 10 ) Dimensions W-D-H 675mm x 1030mm x 1980mm (26.6 x 40.6 x 78 ) Net Weight Approx 150 kgs (331 lbs) MODEL NO. DESCRIPTION PP-77 Automatic Shrink Sleeve Applicator 100 BPM $19,995 PP-77 with Conveyor With 2 meter (6.5ft) of conveyor $26,500 Cutting Knife Extra cutting knife $ 2,500 Mandrel Opens film over bottle $ Page 76

77 SHRINK SLEEVE APPLICATOR PP-10 Shown with no conveyor Same as PP-77 with faster speeds and lager capacity label and bottles sizes Voltage 110/220VAC, 50/60HZ 1 Phase 20AMP Dedicated Power in KW 1.5 Controls 5.7 Delta Color Touch Screen PLC Panasonic FP0R Cutter Plate, 4 blades - 22mm 60mm ( ) Conveyor Dimensions L-W-H 3000mm x 110mm x 900mm (118 x 4.3 x 35 ) Conveyor Motor Siemens AC ½ HP Maximum Sleeve Speed 200 BPM Film Length 120mm (4.72 ) Film Size 22mm 250mm ( ) Range of Bottle Diameter 22mm 125mm ( ) Maximum Bottle Height 350mm (13.8 ) Film Unwind Plate 500mm (19.7 ) Spool Core 127mm 254mm (5 10 ) Motor Controls Schneider Servo Motor Machine Dimensions W-D-H 3000mm x 1100mm x 2000mm (118 x 43 x 78.7 ) Net Weight Approx 250 kgs (551 lbs) MODEL NO. DESCRIPTION PP-10 Automatic Shrink Sleeve Applicator 200 BPM $39,950 PP-10 with Conveyor With 2 meter (6.5ft) of conveyor $44,395 Cutting Knife Extra cutting knife $ 2,500 Mandrel Opens film over bottle $ Page 77

78 SHRINK SLEEVE APPLICATOR PP-150S Shown The Model PP-150S is an automatic shrink sleeve applicator capable of running lay flat tubing of up to 200mm (7.8 ) wide with a cut length from 40mm-200mm ( ) at up to 150 BPM. The PP-150S will handle bottles from 28mm-125mm ( ) in Diameter and up to 320mm (12.5 ) Tall. The PP-150S is ideal for a wide variety of shrink sleeve labels and container types. The bottles are feed on a conveyor through a separating worm gear. The system feeds a specified length of film from a film feed system through a "roller" arm system. The film then moves through a registration sensor and on to the "mandrel" assembly for high accuracy film indexing using a high speed fiber optical sensor. The systems mandrel opens the film and the film is then fed through the machine via a tractor feed assembly. This assembly feeds a specified cut length using servo motors. The film is then cut at the specified length by passing through the servo motor driven rotary cutter assembly. The film is then driven onto the product by use of a high speed film delivery assembly. MODEL NO. DESCRIPTION PP-150S Automatic Shrink Sleeve Applicator $49,995 Mandrel Opens film over bottle $895/ea Worm Gear Screw Separates bottles on conveyor line $595/ea Cutting Knife $2,500 Conveyor 4 1/2 wide sanitary stainless steel slat conveyor with variable speed drive, washdown motor $550/per ft Page 78

79 Machine Shrink labels Bottles to pack Machine model Capacity PP-150S 150 BPM Size L*W*H 2100*850*2000mm (83 L x 33.5 W x 79 H ) weight 600Kgs (1320lbs) Powder supply AC 3-Phase 220/380V Eligibility percent 99.5% Host machine powder 2KW Materials PVC PET OPS Thickness 0.03~0.13mm Labels Length 40~200Mm ( ) Flat width Max200Mm (7.8 ) Inner Dia. Of Labels roll Standard 76mm (3 ) Height Max320mm (12.6 ) Diameter Ø 28- Ø125mm ( ) Material Shapes Glass Metal and Plastic Round, Square, Flat, Curved Cup-Shaped Bottles Typical Production line with Shrink Sleeve applicator and Steam Shrink Tunnel Page 79

80 Steam Tunnels PP-2000M Steam Tunnel Only PP-2000M shown with Conveyor Model The PP-1200M with 48 long chamber x 13.7 H made of # 304 Stainless Steel steam tunnel is easy to operate, easy to maintain and easy to clean. It is designed to efficiently shrink full body shrink bands on almost any container type and almost any shrink film material. The low pressure steam drum distributes steam evenly with a with an integrated steel tube design. There are steam jet tubes in each section of the tunnel which are adjustable for both height and steam output. The shell of the tunnel is constructed of #304 stainless steel and there is also a stainless steel water collecting plate to collect the condensate water. The machines stainless steel, water-proof design makes it easy to clean and maintain Model PP-1500M Same as described above with 60 long chamber x 13.7 H Model PP-2000M Same as described above with 80 long chamber x 13.7 H (Boiler sold separately-see next page) Conveyor is sold separately, Plastic slat top conveyor x 4 wide (sold per ft) Includes variable speed drive (See page 83) *Asterisk indicates item in stock $ 7,900* $ 8,950* $10,500* $550/ft* Specification: Tunnel Opening: Steam Tubes: Construction Material: Main Wall Power: Electro-Thermal Power: Steam Pressure: Overall Machine Size: Machine Weight: Steam Consumption: Conveyor Speed: (48 ), (60 ) or (79 ) long x 5 3/4 wide x 12 high 6 adjustable tubes in 3 sections of tunnel (2 sections in PP-1200m) # 304 Stainless Steel 220V / 3 Phase / 50/60 Hz / 30 Amps Max. 18 Kilo watts PSI 48, 60 and 80 L x 22 W x 48 H 510 LB (230kg) 55 LB /hour (24kg/h) feet /min Page 80

81 CONVEYORS-Narrow width Plastic or SS belting PP-108SS Shown - Stainless Steel frame construction, available with either Plastic Slat Top or Stainless Steel Conveyor Belting, Standard width is 4. PP-72SS MODEL NO. DESCRIPTION 6 ft Plastic slat top or stainless steel conveyor belting, 4 wide belt, variable speed, w/adjustable side guide rails. Stainless Steel Frame Construction $3,500 PP-108SS PP-144SS PP-180SS 9 ft Plastic slat top or stainless steel conveyor belting, 4 wide belt, variable speed, w/adjustable side guide rails. Stainless Steel Frame Construction 12 ft Plastic slat top or stainless steel conveyor belting, 4 wide belt, variable speed, w/adjustable side guide rails. Stainless Steel Frame Construction 15 ft Plastic slat top or stainless steel conveyor belting, 4 wide belt, variable speed, w/adjustable side guide rails. Stainless Steel Frame Construction $5,000 $6,600* $8,500 PP-30 Shown (Steam Generators sold Separately) The steam generators are an integrated system, National board of PVI inspected, ASME Coded, UL Listed, Canadian UL Listed. Note: It is the responsibility of the customer to conform to any state or local codes. This steam generator design consists of a high pressure chamber filled with water that is heated by submerged electric heaters. Automatic controls are provided to maintain the pre-set operating pressure and water level. Safety features include automatic low water cutoff, dual pressure controls, safety valve and visible water level gauge. Main Wall Power: 220 Volt, 3 Phase, 50/60 Hz, 84 Amps Max. (480 Volt, 3 Phase, 37 Amp also available) Electric Rating: 30 KW Developed Boiler Horsepower: 3.0 Steam Capacity (at 212F)lbs/Hr: Gross BTU Output: 100,400 Overall Dimensions: 26 L x 19 W x 23 H Steam Inlet: ½ Steam Outlet: ½ Weight: 200 lbs. (91kg) Model KW Volts Amps Phase BHP Steam Capacity Lb/Hr at 212F Gross BTU Retail PP ,000 $6,995* PP ,750 $7,500* PP ,400 $7,995* PP ,900 $8,500 Page 81

82 SIDE SEAL MACHINES-Intermittent and Continuous Motion Model INT-20-2 Belt Std Model 40 PPM INT-20-2 Belt Seal Size L x W x H 20 wide cross seal 8 high opening unlimited length. Max package width 16 Description CM-20 APA Automatic Product Adjustment- Infeed conveyor and Inverting triangle will automatically adjust to package size from one touch control panel. Delta 7 color touch screen with 12 Program memory. Stainless Steel $47,435 INT-20 2 Belt Servo Model 50 PPM Servo Drive Technology Rotary wheel side seal after end seal. Speeds of 30 to 50 PPM, 4 minimum package length. Designed for use $36,500 (1) Axis servo drive motor, no air required! Stainless Steel made for USDA approval Servo drive offers higher speeds to 50 PPM, Automatic adjustment of seal head position, infeed conveyor and side seal. with polyolefin or polyethylene films. Maximum package height 8. Center Seal Standard. The side seal automatically adjusts to package height setting on the Servo model. INT-20-3 Belt Same as above Rotary wheel side seal prior to end seal. 30 to 50 PPM. Maximum package height 8. Center seal Standard. 3 Belt provides for automatic product separation. INT-30-2 Belt 30 cross seal Max package width 26 Rotary wheel side seal after end seal. Max package height 10 Speeds up to 50ppm $32,500* $52,895 $39,600 $40,500 INT-30-2 Belt Same as above Wipe down only-made for USDA approval $57,850 Stainless Steel INT-30 3 Belt Same as above Rotary wheel side seal prior to end seal. 3 belt design allows for automatic product separation. $44,500 SS Version Stainless Steel Wipe down only-made for USDA approval Inquire INT-40-2 Belt 40 cross seal Max package width 35 Rotary wheel side seal after end seal. Max package height 12 3 Belt provides for automatic product separation. $52,650 Stainless Steel Stainless Steel Wipe down only-made for USDA approval $76,300 *Asterisk indicates item in stock Page 82

83 CM-20 Continuous Motion Side Seal MODEL NO. DESCRIPTION CM-20 Hi Speed Continuous Motion rotary wheel side seal with Servo-Drive technology. 7 Delta color touch screen with APA Automatic Product Adjustment-Infeed conveyor and Inverting triangle will automatically adjust to package size from one touch control panel. 50 program memory. Servo Drive Technology Rotary wheel side seal before end seal. Speeds of 60 to 75 PPM, 4 minimum package length. Designed for use with polyolefin or polyethylene films. Maximum package height 8, 20 Hot knife cross seal bar. Variable speed drive FPM. 3 belt design provides for automatic product separation. (Infeeds sold separately) 220v 1 phase 20 amp CM-20-SS Same machine as described above in #304 stainless steel construction, (wipe down only) SIDE SEAL MACHINE OPTIONS Options for Side Seal Machines $55,500* $82,500 Closing Conveyor $1,950 Export crating $ 800 Non-standard voltage $1,200 Print Film Registration $3,500 Increase Package Height to 12 Maximum (INT models only) $5,000 3 ft Belted infeed conveyor w/adjustable side product guides $2,850 6 ft Belted infeed conveyor w/adjustable side product guides $4,000 3 ft Flighted infeed conveyor w/adjustable side product guides $3,500 6 ft Flighted infeed conveyor w/adjustable side product guides $5,995 6 ft flighted Paddle Style infeed conveyor with 3 to 6 wide paddle widths available $6,500 6 ft Flight Bar infeed conveyor, great for multi-packing of products $7,500 Extended infeed conveyor (3 ft sections) $3,500 Hole punch ¼ $3,895 Page 83

84 STRAPPING MACHINES MODEL SP-1 $ 950 Fixed Base, Enclosed cabinet, uses 3/8 or ½ strap, Mechanical Tension Control, casters SP-1SS $1,785 Stainless Steel SP-1L $ 950 Low Table Height, Mechanical Tension Control SP-1SL $1,150 Super Low Table Height, Mechanical Tension Control SP-4 (Our most popular model) $ 950* Adjustable Height, uses 3/8 or ½ strap, Mechanical Tension control, casters SP-4SS Stainless Steel $1,850 SP-4U Fixed table height. Mechanical tension control $ 950 SP-4E Adjustable Table Height, Electronic Tension Control $1,050 SP-4ED Adjustable Table Height, Electronic Tension Control, Digital Display $1,050 SP-5 $2,150 Vertical Strapping, Mechanical Tension Control SP-5SS Stainless Steel $3,150 Page 84

85 TP-101 Fully Automatic Strapping Machine 27 Straps per minute. Automatic Arch Type Strapping machine with standard arch size of 34 w x 24 H, cycle start with foot switch, push button or table top roller switch. 9 or 12mm strap size 8 x 8 core size, 220 volt. $4,500* TP101AP $7,850 Pneumatic Top Compression Cylinder to Compress Package TP101SS $8,650 Automatic Arch Type, PLC Control, Stainless Steel TP101PR $8,850 Fully Automatic Arch Type, Power Roller Table PLC Control, 3 Photo eyes The TP-101-PR is a fully automatic strapping machine and is ideal for high speed automated packaging lines. The TP-101-PR strapping machine is suitable for many medium and heavy weight strapping applications. The system has powered table rollers. Strapping tension, power, temperature and storage are adjusted with outside controls for convenience. TP-101 PR-Good for packages over 20 lbs. TP101PB $8,950 Fully Automatic Arch Type, Power Belted Table, PLC Control, 3 Photo eyes with timers allow strap position to be set on package. TP-101 PB-Good for packages 20 lbs. or lighter Arch Size (Standard) Table Height Strap Width Strapping Speed Max Tension Power Supply Machine Dimensions Weight W850mm H600mm 810mm 9,12,15mm 2 sec./per Strap 80 kgs 220, 240, 380 V 50/60Hz 3Phase W1600mm, D590mm, H1500mm 230kgs Model TP201 $7,750 Fully Automatic Side Arch, PLC Control, 2 Photo eyes TP-201 SS $10,285 Page 85

86 TP301 $7,850 Fully Automatic Arch Type, PLC Control Low Table Height TP301PB $9,925 Fully Automatic Arch Type, PLC Control, Power Belted, 3 Photo eyes TP501 $8,450 Automatic Arch Type Thin Strap Capability 6mm SS-502 $7,500 High speed straps per minute, fully automatic, servo motor driven, PLC solid state control, CE standard. Will run 5, 6, 8, or 9 mm strap width (specify at time of order) Optional Items Automatic Threading Option $595 Center belt for TP 101PB $595 Increase Arch Width every 8 $250 Increase Arch Height in 8 Increments, add $200 PP-8026 $4,500 Pallet Strapping Machine, fast 1.5 seconds per strap, Instant Heating in 5 seconds machine is ready to operate, 110/220 volt power. Uses 6-15mm strap width Page 86

87 PALLET STRETCH WRAPPERS PP-981 Now with soft start turntable for unstable loads and photo eye included. PP-981HP PP-981LP (Includes Ramp) Model Description Entry Level PP-981 HP High Profile No Ramp Mechanical Brake Stretch 100%, 3,000 lb capacity, 10 RPM, 110 volt $4,650* PP-981HP-Scale Package Built in scale with 6 Load cells, LED weight indicator to 5,000lb $7,750 PP-981 HP/SS Stainless Steel Inquire PP-981 LP Low Profile Includes Ramp Mechanical Brake Stretch 100%, 3,000 capacity, 10 RPM, 110 volt. $5,150* PP-981 LP/SS Stainless Steel Inquire PP-982HP Description Mid Range PP-982LP (Includes Ramp) PP-982 HP Electro Mechanical Brake Stretch Machines, up to 150% stretch. $5,950* 4,000 lb capacity, Photo eye, 7 Color touch screen, 12 program memory, 0-12 RPM Turntable, 110 Volt. LP Model includes ramp PP-982 LP $6,550* *Asterisk indicates item in stock Page 87

88 PALLET STRETCH WRAPPERS PP-983HP PP-983LP (Includes Ramp) PP-1621AL Cut, Clamp & Wipe Description High Quality PP-983 HP High Profile-No Ramp Powered 225%, $7,950* 4,000 lb capacity, photo eye, 1 HP motor, 0-12 RPM Turntable, 110 volt PP-983HP/SS Stainless Steel Inquire PP-983 LP Low Profile - Includes Ramp, Powered 225%, 4,000 lb capacity, photo eye, 1 HP motor, 0-12 RPM, 110 volt $8,450* PP-983HP with Scale PP-983LP with Scale Scale built into pallet wrapper frame using load cells, 5000 lb capacity, LED display $10,950* $11,745* PP-983LP/SS Stainless steel Inquire PP-1621AL Fully Automatic Cut, Clamp and Wipe Pallet Stretch Wrapper with PLC controller and powered pre-stretch at 300%, Wrapping speed of 1-10 cycles per minute, 59 diameter turntable that spins at 15 RPM, Max load weight of 4,400lbs, Std pallet wrap height 83 *Asterisk indicates item in stock $13,750* Page 88

89 PALLET STRETCH WRAPPERS PP-983 PJ PP-983 TP PP-983DT (Pallet Jack Turntable) (Top Platen Hold Down) (Dual Turntable) *For Open base pallets only for light unstable loads MODEL NO. DESCRIPTION PP-983-PJ (Pallet Jack Turntable) Designed for open base pallets only No ramp required Load pallet with pallet jack-great for printing industry $8,625 PP-983HP-TP Top platen hold down for light unstable product $10,925 PP-983HP-DT (Dual Turntable) Dual turntable for increased production speeds $12,075 PP-4512 Mobile Pallet Wrapper with built in Pallet Jack. Production rate of up to Loads /hr Min/max Pallet dimensions: 48 L x W Maximum pallet height: 71 Rotating Arm Speed of 1-12 RPM 120 volt power, will wrap 100 loads on full charge 8hrs Top and bottom wrap counts with built in photo eye Safety feature: If rotating arm inadvertently strikes an object the arm will automatically stop PLC Controlled Mechanical brake stretch system used $8,795 Page 89

90 PALLET STRETCH WRAPPERS PP-4510R Robot PP-59T Powered turntable PP-985LW Luggage Wrapper- Stretch Wrapper With footswitch and optional ramp Great for airport kiosk MODEL NO. DESCRIPTION PP-4510R Robot Pallet Stretch Wrapper, 250% pre-stretch $11,750* PP-59T Powered turntable with footswitch Optional Ramp $2,895* $550* PP-985LW Luggage Wrapper Single 20 head $6,500 PP-985LW Luggage Wrapper Dual head system-(1) 20 pre-stretch head and (1) 30 $8,500 head PP-987 Mattress/Sofa wrapper Furniture wrapper (turntable is 102 L x 59 W) $12,495 PP-201 Ring Wrapper PP-203 Roll Wrapper MODEL NO. PP-201 DESCRIPTION Orbital Ring Wrapper Ring Dia: / Product Size: 7.8 W x 7.8 H Rotation Speed of 50 RPM / Conveyor Speed: 5m (16ft/min) Std conveyor length 16 /220V $17,950 Page 90

91 DESCRIPTION MODEL NO. PP-203 Roll Wrapper Roll Wrapper is designed to wrap large cylindrical items. Pkg Size: L x W, 4,400 Max load weight, 0-15 PRM turntable speed for wrapping loads per hour. $19,750 PP-1223ARD Powered Roller Turntable PP-1224AHM Rotary Arm Wrapper MODEL NO. PP-1223ARD DESCRIPTION Fully Automatic with Powered Roller Turntable. Features Cut, Clamp and Wipe, 78 Diameter Turntable, 90 pallet wrap height, 300% powered pre-stretch, Turntable speed 0-15 RPM, load weigh of 4,400 lbs, 220V 3 phase *Optional infeed or discharge conveyor lengths available. *Powered conveyor sold separately PP-1224AHM Rotary Arm Pallet Stretch Wrapper. Features 300% powered pre-stretch, up to 14 RPM rotation speed, 80 wrap height, up to 40 loads per hour. *Also available in a single column style mounting $31,950 $13,500 Optional Items 5,000lb Capacity Turntable (PP-982 and PP-983 ONLY) Turntable support rollers increased $1,325 from 18 to 28 to support added weight and motor increased to 1 HP Print out of weight data from scale $ Wrap height $ Diameter turntable $1,695 Base Extensions-24 $ 650 Extra Ramp-Standard ramp is 70 long $ 550 Extra Long Ramp (85 ) $ 695 Extra Long Heavy Duty Ramp (85 ) $ 995 Insta-Cut automatic film severance (PP-982 and PP-983 only) $ 695 Top platen hold down (PP-982 and PP-983 only) $2,550 Page 91

92 TRAY SEALING EQUIPMENT EASYTECH SEALTECH-1 SEALTECH-2 EASYTECH Manual Tray Sealer, pull film from the back to cover they tray, pull down the handle of the heated platen to seal the tray and release, the platen is spring loaded, Digital Temp Control #304 Stainless Steel Frame, will run CPET or APET trays Max tray size: 6.9 x 10 One set of tooling included 110 volt (Machine dims 17 L x 14 W x 10 H) Weight-45 lbs Additional tooling $2,495 $ 225 EASYTECH-1 SEALTECH Same machine as described above with larger seal area Max tray size: 9.8 x 12.6 One set of tooling included Additional Tooling Semi-Automatic Tray Sealer, as you push the tray carrier in the film automatically moves over the top of the tray to be sealed, the machine will seal and cut the film using an electric driven motor. Digital temp control with adjustable seal timer, #304 Stainless Steel Frame, will run APET or CPET trays Max tray size: 6.9 x 10 One set of tooling included 110 volt, Machine Dims: 15 L x 13 W x 12 H, Weight-66 lbs Additional Tooling $2,850 $ 295 $2,995 $ 325 SEALTECH-1 SEALTECH-2 Same machine as described above with larger sealing area Max tray size: 12.6 x 10 One set of tooling included Additional Tooling Same machine as described above with larger sealing area Max tray size: 14.1 x 10 One set of tooling included Additional Tooling $3,750 $ 375 $4,550 $ Page 92

93 TRAY and MAP SEALING EQUIPMENT PP-900 Series of Tray and MAP (Modified Atmosphere packaging) Sealers PP-900S1 PP-900S2 PP-900S4 PP-900L1 PP-900L2 PP-900L4 Semi-Automatic Tray Sealer (Automatic or Manual mode) # 304 Stainless Steel Construction, In automatic mode once tray is placed into cavity a sensor signals machine to cycle, Die cuts around container for attractive look, 5 minute warm up time. Dims: 20 L x 14 W x 32 H, Weight:132 lbs Max tray size: 8.6 x 6.7 ( pcs/hr) 1 Cavity Additional Tooling Gas Flush Model PP-900SF1 (Additional Tooling-$1,640) Same machine as described above with 2 cavities Max tray size: 3.9 x 6.7 ( pcs/hr) Additional Tooling Gas Flush Model PP-900SF2 (Additional Tooling-$1,850) Same machine as described above with 4 cavities Max tray size: 3.9 x 2.95 ( pcs/hr) Additional Tooling Gas Flush Model PP-900SF4 (Additional Tooling-$2,150) Same machine as described above with Larger Seal Area 1 cavity Max tray size: 12.6 x 9.8 ( pcs/hr) Additional Tooling Gas Flush Model PP-900LF1 (Additional Tooling-$2,050) Same machine as described above with 2 cavities Max tray size: 5.9 x 9.8 ( pcs/hr) Additional Tooling Gas Flush Model PP-900LF2 (Additional Tooling-$2,350) Same machine as described above with 4 cavities Max tray size: 5.9 x 4.3 ( pcs/hr) Additional Tooling Gas Flush Model PP-900LF2 (Additional Tooling-$2,450) $4,995 $1,350 $6,550 $5,595 $1,550 $6,895 $6,250 $1,850 $7,450 $5,295 $1,550 $7,450 $5,750 $1,750 $7,795 $6,295 $1,950 $8,395 Page 93

94 PP-900XL1 PP-900XL2 PP-900XL4 PP-900XXL1 PP-900XXL2 PP-900XXL4 Same machine as described above with Larger Seal Area 1 cavity Max tray size: 13.8 x 10.2 ( pcs/hr) Additional Tooling Gas Flush Model PP-900XLF1 (Additional Tooling-$2,250) Same machine as described above with 2 cavities Max tray size: 6.3 x 11 ( pcs/hr) Additional Tooling Gas Flush Model PP-900XLF2 (Additional Tooling-$2,575) Same machine as described above with 4 cavities Max tray size: 6.3 x 4.7 ( pcs/hr) Additional Tooling Gas Flush Model PP-900XLF4 (Additional Tooling-$2,875) Same machine as described above with Larger Seal Area 1 cavity Max tray size: 16.5 x 11.4 ( pcs/hr) Additional Tooling Gas Flush Model PP-900XXLF1 (Additional Tooling-$2,675) Same machine as described above with 2 cavities Max tray size: 7.7 x 11.4 ( pcs/hr) Additional Tooling Gas Flush Model PP-900XLF2 (Additional Tooling-$2,875) Same machine as described above with 4 cavities Max tray size: 7.7 x 5.1 ( pcs/hr) Additional Tooling Gas Flush Model PP-900XLF4 (Additional Tooling-$3,195) $6,550 $1,950 $8,575 $6,950 $2,150 $8,995 $7,450 $2,375 $9,850 $7,600 $2,150 $10,195 $8,250 $2,375 $10,650 $8,650 $2,575 $11,350 One Set of Tooling provided with each machine (Maximum tray depth for all machines is 4.7 ) Photo eye included for running print registered films Optional: Date Coder $1,195 Air Required: PSI 110 or 220 Volt Power Page 94

95 TRAY SEALING EQUIPMENT SCS-320 TS-Pro Series Model 1808 TS-1600/2 Table Top Tray Sealer Shuttle Style In-line Tray Sealer Model Description SCS-320 Table top tray sealing machine. Great for yogurt cups, juice, fruits, meat, candy etc. Can use PP, PS, PET, Easy Peel Film, foil films. Single Cavity, 5.7 Color touch screen Seal area: 7 L x 5.5 w x 5.5 H Speeds of 10 CPM, #304 Stainless Steel frame 220v, 1 Phase, 5 amp $5,495 SCS-400 Same machine as above with larger seal area: $5, L x 6.8 W x 7 H, Single cavity tooling SCS Same machine as described above with dual (2) tray cavities $6,500 TS-Pro Model 1908 Model 1808 Shuttle style tray sealer using laminated films manufactured in # 304 Stainless Steel construction. Seal area of 12.8 (325mm) x 10.3 (262mm) x 4 (102mm) Tray is manually loaded and unloaded from the front. Pneumatic driven top seal platen, Top seal mold with knife, tray placement mold with anvil, Cycle output of 4-6 PPM. Omron PLC with Omron 7 color touch screen. 220 volt, 1 phase PSI; Includes one set of tooling Optional hot stamp ribbon printer (THR35A) 35mm 2x3mm Intermittent Motion sealing with speeds from 5-27 PPM, Adjustable sealing dwell and sealing platen force, Uses straight slit film, unprinted or random repeat printed, Constructed of Stainless Steel and anodized aluminum. 120 volt 6 amps. Tray size: 8.5 x 6.5 x 3.25 H 3.5 or 7 film cut (OAL) 77 L x 23 W x 47 H Additional set of tooling: $3,750 Stainless Steel Frame Construction, Automatic Discharge, Rotary motion sealing at up to 35 PPM, Continuous motion of the conveyor, Removable tray carriers constructed of aluminum. 220 volt, 1 phase, 10 amp Tray size: 8.5 x 10 x 3.25 H / (OAL) 83 L x 56 H x 27 W Additional Tooling Set: $17,950 $1,600 $20,500 $26,750 $3,750 Page 95

96 TS-1600/2 2 Lane In-line automatic tray sealing machine for 7 diameter containers using laminated films, Stack of containers are loaded manually into hopper and automatically dispensed, Sealing and cutting pneumatic operations controlled by Omron PLC and Omron 7 color touch screen, # of tray carriers-custom made. (10-20 cycles per minute) Speed dependent on tray size PPM. Machine comes with one set of tooling molds. 220 Volt, 1 phase 3.5KW PSI $39,500 TS-1600/3 (3 Lane model) PPM TS-1600/4 (4 Lane model) PPM Optional: Hot stamp ribbon printer Additional set of tooling $42,500 $47,500 $2,950 $9,500 Tray and MAP Sealing Machines Model VT-109 Will seal one #3 tray (7.7 x 5.7 ) or 1-2 cups, Max film width $5, , Cycle speed of 10 cycles per minute, 110 volt, 10 amp. Table top, Auto /Semi-Automatic operation VT-300 Will seal one tray (12.2 x 11 x 3.5) 220 volt, semi-automatic $9,450 VT-400 Stainless Steel Construction, Semi-Automatic operation, $24,995 Automatic film advance and cut system, Print film registration, Bush vacuum pump, Will run 1 tray (12.9 x 9.4 x3.5 ) or 2 Trays (8.6 x 6.7 x 3.5 ) deep, 2.5 cycles per minute, 230V, 3 phase, 30 amp, Max film width 15.7 (MAP Sealer) VT-570 Stainless Steel Construction, Semi-Automatic operation, $37,995 Automatic film advance and cut system, Print film registration, Bush vacuum pump, Will run 1 tray (17.3 x 13.5 x3.5 ) or 4 Trays 8.6 x 6.7 x 3.5 ) deep, 2.5 cycles per minute, 230V, 3 phase, 30 amp, Max film width 18.1 (MAP Sealer) Page 96

97 TURNTABLES / ACCUMULATORS PP-36LS RSM-1200 PP-48AT PP-48UT Lazy Susan Turntable Stainless Turntable Accumulation Unscrambling Turntable for Bottles Turntable Model Description PP-36LS 36 Diameter turntable by 3 Deep lazy Susan product $1,395* accumulator variable speed drive. PP-36LS-SS Same unit described above in Stainless Steel $3,550* PP-48LS 48 Diameter turntable by 3 Deep lazy Susan product $1,895* accumulator variable speed drive. PP-48LS-SS Same unit described above in Stainless Steel $3,895* PP-60LS 60 Diameter turntable by 4 Deep Lazy Susan $2,395* PP-60LS-SS Same unit as above in Stainless Steel $4,895* RSM-1200 RSM-800A 48 Diameter Lazy Susan accumulation turntable, Variable speed drive, #304 Stainless Steel Frame, 220 volt. 32 Diameter Rotary Unscrambler and Accumulator, Stainless Steel Construction. Machine Dimensions: 47 L x 32 W x 33.5 H Electrical: 220 volt, 1 phase $4,650* $4,895* PP-36AT-SS 36 Diameter Accumulation turntable for bottles etc -Stainless $3,795* Steel PP-48AT-SS 48 Diameter Accumulation turntable for bottles etc -Stainless $4,495 Steel PP-60AT-SS 60 Diameter Accumulation turntable for bottles etc -Stainless $5,495 Steel PP-48UT-SS 48 Diameter Unscrambling turntable in Stainless Steel $4,695 PP-60UT-SS 60 Diameter Unscrambling turntable in Stainless Steel $5,650 LS= Lazy Susan AT= Accumulation turntable UT= Unscrambling turntable Page 97

98 TWIST TIE MACHINES TWIST TIE MACHINE 3567 The most technologically advanced twist tie machine in the world Model #3567. This state-of-the-art machine does not utilize a reciprocating arm which eliminates jams. The unique straight line ribbon feed avoids the ribbon jam ups that are common with other twist tie machines on the market today. The Model #3567 is U.L. approved constructed of all metal components for long and reliable service life has a 1/2in. tying capacity and uses only a 3in. piece of twist tie ribbon per closure which is a 25% savings in consumables compared to competitive machinery making the Model #3567 for economical to use. Capable of tying up to 50 bags per minute the superior design and compact size has made it perfect for all applications including: bakery, food, candy, and confectionary industrial wire harnessing and assembly. The Model #3567 works with paper/plastic (our style # ) twist tie ribbon plastic/plastic (our style # ) twist tie ribbon decorative twist tie ribbon (our style # ) and our exclusive patented Polycore (our style # ) non-metallic twist tie ribbons. Length: 21 in., Width: 7 in., Height: 12 in., Weight: 16 lbs. Tying Capacity: 1/2 in. dia., Operating Speed: 50 per minute Power: 110 volt (220v available) TWIST TIE MACHINE 3570 The model #3570 is the perfect twist tie machine for larger bags or for applications where variable tying diameters are necessary. Adjustable tying diameters from ¼ inch to 1 3/8 inch allows this machine to be used for a variety of products including bags, small coils, hanks, bundles, and on most products where a twist tie closure is desired. Manufactured with the finest components, this machine requires no tools to make tying adjustments, has separate adjustments for tying diameter and ribbon length, and requires no operator training prior to use. The Model #3570 uses 5/32 inch wide twist tie ribbon including our exclusive Polycor, non-metallic twist tie ribbon. Length: 24 in., Width: 6 in., Height: 11 in., Weight: 26 lbs. Tying Capacity: 1/4 in /8 in. adjustable, Operating Speed: 40 per minute Power: 110 volt (220v available) Model 3567 $1, $3,925 1,500 ft spools of paper or plastic ribbon 27 gauge wire 5/32 5 Spools 10 Spools 25 Spools 50 Spools $17.75 $17.25 $17.00 $ Page 98

99 TYING MACHINES Model BT-45 Tying Machine-Semi Automatic rotary tying machine used to bundle a wide variety of packages from laundry to manufacturing industries, garment and textiles. Maximum package size 16 x 17 with a 9 throat depth. Uses PE tying twine. Up to 40 cycles per minute (110 volt power) Machine Dim: 35 L x 31 W x 55 H (348 lbs) PE Twine-White Color (1,800 meters roll length) 5,760 ft (Packed 12 rolls per case) Case weight 24kg (53 lbs) $4,900 $14.95/roll Page 99

100 VACUUM CHAMBER MACHINES Model TC-280F Chamber size 14 x 15 x3.7 deep Distance between seal bar 11.8, Seal bar length 11.8, 110 volt TC-350FLR Chamber size 41 L x 16.6 W x 4.7 deep, Seal bar length 33 TC-420F Chamber size 19.8 x 19.2 x 7, Distance between seal bars 14.9, seal bar length 17.7 $2,095 $5,895 $3,595 TC-420LR Chamber size 19.8 x 19.2 x 7 $3,895 TC-520F Chamber size: 23.6 x 23.6 x 7, Distance between seal bars 19.8, Seal bar length 21 $4,895 TC-520LR Chamber size: 23.6 x 23.6 x 7 $5,595 Page 100

101 VACUUM CHAMBER MACHINES SC SERIES VACUUM CHAMBER PACKAGING MACHINES Model SC-420LR Chamber size 19.8 x 19.2 x 7 $4,695 SC-520LR Chamber size 23.6 x 23.6 x 7 $5,595 SC-680LR Chamber size 35.5 x 26 x 7 $6,995 SC-800LR Chamber size 38 x 33.5 x 8 $9,995 DC SERIES VACUUM CHAMBER PACKAGING MACHINES Model DC-530 Chamber size 30 x 23.6 x 7 $ 9,980 DC-640 Chamber size 32 x 29 x 8 $12,880 DC-650 Chamber size 32.2 x 35 x 8 $13,880 DC-800 Chamber size 38.5 x 31 x 8 $14,985 Page 101

102 VACUUM SEALERS-Entry Level-Table Top E2000V Model E2000G Vacuum Sealer, ¼ seal width, clean room compatible, LCD display, Retracting nozzle, no pinch jaw, foot switch, 110 volt, 5 cfm at 90 psi E 1500V 15 long seal E 2000V 20 long seal E 2500V 25 long seal E 3000V 30 long seal E 3500V 35 long seal $2,025 $2,210* $2,725 $2,945 $3,300 E 1500G 15 long seal Vacuum sealer with gas purge E 2000G 20 long seal E 2500G 25 long seal E 3000G 30 long seal E 3500G 35 long seal $2,420 $2,663 $3,185 $3,465 $3,645 E2000D E2000GSS T3500G Model E 2000D 20 Vacuum sealer with dual nozzle and gas purge, ¼ wide seal. E 2500D 25 long seal E 3000D 30 long seal E 3500D 35 long seal T 1500G 15 Touch Screen Vacuum Sealer with gas purge, password protected 5 bag menu, multiple programs. T 2000G 20 long seal T 2500G 25 long seal T 3000G 30 long seal T 3500G 35 long seal $3,240* $3,760 $3,935 $4,235 $3,840 $4,050 $4,578 $4,735 $5,040 Page 102

103 VACUUM SEALERS-Medium Duty-Table Top AVS AVN CAVS Model AVS 20 Vacuum Sealer with foot pedal operation. $2,095* AVN 20 Vacuum Sealer with gas purge $2, long seal $3, long seal $3, long seal $3, long seal $7,350 CAVS 20 Vacuum sealer, fully self contained no air supply required. 30 long seal $3,142 $3,670 CAVN AVC-20 Vacuum Chamber Model CAVN 20 Vacuum sealer, fully self contained, gas purge $3,670 CAVN 30 Vacuum sealer, fully self contained, gas purge $4,080 AVC-20 Chamber vacuum sealer, chamber size 22 x 22 x 4 $5,460 AVCG-20 Chamber vacuum sealer with gas flush $5,800 3/8 (10mm) Seal width-$ *Asterisk indicates item in stock Page 103

104 VACUUM SEALERS-Heavy Duty-Table Top V V-1600 This Value Vac 1600 is truly a machine that delivers both quality and performance at a price that says, WOW. If you are looking for a no frills, entry level, commercial vacuum sealer, look no more. If longer seal lengths or other options are required, then take a look at our other available models. 120 volt, Vacuum pressure 20Hg, Air Consumption 2.5 CFM MPV-18 MPV-18 is the vacuum sealer that handles the toughest vacuum packaging problems as well as the tightest budgets. It is an easy to operate economical vacuum sealer. With a price lower than the least expensive fixed nozzle. The Mighty Mutt provides high performance utilizing variable solid state controls for seal, dwell and vacuum timing. All these coupled with the ease of use of a retractable machine. The Mighty Mutt s lightweight design and all metal construction mean portability and durability. The user-friendly retractable snorkel makes this entry-level unit a real winner. Perfect for small to medium shops. 115 volt, Vacuum pressure 20 Hg, Air Consumption 7.8 CFM The Workhorse tabletop vacuum sealing line made from high grade stainless steel and heavy-duty anodized aluminum, these units will provide years of superior service. Ideal for medium to high volume use, sealers in the Retractable Series can be easily customized to meet special requirements in such diverse applications as food, medical or clean room environments. Standard features include: upper and lower heat bars; graphical screen control; single-parted exhaust; and exclusive built-in safety seal bar. The Retractable Series is an unequaled product for both its quality and price. Model VV Seal Length x ¼ wide seal $1,495 MPV Seal length x ¼ wide seal $2,195 Workhorse GVS2100R 21 seal bar $5,495 Page 104

105 VACUUM SEALERS-Heavy Duty NZ SERIES NOZZLE TYPE VACUUM PACKAGING MACHINE NZ-1500 shown Model GVS2100R with stand NZ-600 with 23 seal bar, Nozzle Vac/Gas Stainless Steel construction, $13,615 Gas Flush, Bag holding clips, IP-56 electrical box, Busch vacuum pump NZ-1000 Same as above with 39 seal bar $15,895 NZ $21,080 NZ $28,455 NZ $35,830 NZ $48,370 GVS-2100R With Stand-21 seal bar $ 8,995 GVS-2600R With Stand 26 seal bar $ 9,550 GVS-3100R With Stand 31 seal bar $10,075 GVS-3600R With Stand 36 seal bar $10,600 Page 105

106 STOCK VACUUM BAGS-HEAVY DUTY 3 Mill 3 Mill STD Barrier Nylon/Poly COEX 7 layer Vacuum Bags 3 Seal pouches with seal dimension of 3/8 Inner packed in 250 quantity bagged Size Part # Qty per case Minimum order $ (Mixed sizes ok) Carton Weight Qty 1-5/m C/1000 Qty 6-24/m C/1000 Qty /m Cost/ x $20.51 $19.70 $18.90/m 6 x $28.12 $27.00 $ x $35.15 $33.70 $ x $42.20 $40.54 $ x $52.75 $50.65 $ x $36.92 $35.46 $ x $45.12 $43.39 $ x $46.88 $45.03 $ x $56.26 $54.05 $ x $67.75 $61.00 $ x $56.45 $50.84 $ x $70.35 $67.55 $ x $76.20 $76.20 $ x $87.90 $84.40 $ x $ $ $97.18/m $48.59 box 10 x $ $ $118.78/m $59.39 box 10 x $ $ $161.96/m $80.98 box 12 x $84.38 $81.06 $ x $98.45 $94.57 $ x $ $ $103.65/m $51.82 box 12 x $ $ $116.62/m $58.31 box 12 x $ $ $129.57/m $64.78 box 12 x $ $ $155.48/m $77.74 box 14 x $ $ $120.94/m $60.47 box 14 x $ $ $151.16/m $75.58 box 14 x $ $ $181.40/m $90.70 box 16 x $ $ $172.76/m $86.38 box 16 x $ $ $207.32/m $ box 16 x $ $ $224.60/m $56.15 box 16 x $ $ $241.86/m $60.47 box 18 x $ $ $213.80/m $53.45 box 18 x $ $ $272.11/m $68.02 box 20 x $ $ $302.34/m $75.58 box 22 x $ $ $403.83/m $ box 24 x $ $ $466.43/m $ box These bags are commercial grade and will not work on home vacuum systems Page 106

107 VERTICAL FFS MACHINES Vertical Form Fill and Seal Bagger Recommended for all types of products packed in pillow or gusseted pouch using laminate film or BOPP roll stock. Machine can use Auger filler for powders, Volumetric Cup Filler for beans, rice etc or Multi- Head Weigh Scales for cereals, chips, candy etc. *PM-420 Shown with optional auger feeder and discharge conveyor Model Description PM-320 PM-420 PM-520 PM-620 Options: Vertical form fill and seal automatic bagging machine with 5.7 color touch screen for easy set-up and adjustment. Panasonic PLC controller, servo motor drive, photo eye for printed films, product counter. Speeds up to cycles min Film width: ( mm) Bag length: (70-280mm) Bag width: in. (80-150mm) Same machine as described above with larger capacity. Speeds up to 50 cycles/min Film width: ( mm) Bag length: 3-12 (70-310mm) Bag width: (85mm-200mm) Same as above with larger capacity Speeds up to 45 cycles per minute Film width: ( mm) Bag length: (70-390mm) Bag width: (85-245mm) Same as above with larger capacity. Speeds up to 35 cycles/ min Film width: ( mm) Bag length: (70-500mm) Bag width: ( mm) Stainless Steel Frame Construction Hot Stamp Printer (THR25A) Video Jet 6220 Thermal Transfer Printer (1.26 x1.34 print area) Gas Flush Device Hole Punch (Euro Slot or Round Hole) Additional Forming Collar Film Static Eliminator Bag Gusset Device Powder Dust Extractor $27,500 $29,500 $31,950 $36,500 $3,995 $1,600 $5,795 $1,850 $2,195 $1,950 $3,450 $2,595 $4,250 Page 107

108 Vertical FFS-Sachet Packs-3 or 4 Sided Seals for Powders 52-AG 52-GT Vertical Sachet FFS The Model 52-AG is a continuous cam-driven vertical form fill and seal for sachet packing of powder products for cosmetic, pharmaceutical, chemical, agriculture, and/or food industries in three or four-side seal bag. It can make a bag up to 90mm(3.5 ) W x 140mm (5.5 ) L. New servo power control auger for precise filling and turbine shuffle for flow boosting agitators. Auger included in price Vertical Sachet FFS The Model 52-GT is a continuous cam-driven vertical form fill and seal for sachet packing of instant coffee, drink mix, sugar, salt, seasoning, and free flow granular products in three or four-side seal bag. It can make a bag up to 90mm (3.5 ) W x 140mm (5.5 ) L. Includes Volumetric Cup Filler in price $18,750 $16,950 R-95 The Model R-95 is an intermittent vertical form fill and seal, equipped with AG50-L auger filler for packing powder products for cosmetics, pharmaceuticals, chemical, agriculture, and/or food industries in lap seal or fin seal stick pack. It can make a bag up to 40mm (1.57 ) W x 180mm (7 ) L. $22,000 Auger included in price Options: Chaplet Device-Chained Bags together-requires air Easy open tear notch Video Jet Model 1210 Small Character Ink Jet Printer (date code, lot number words etc) Video Jet 6320 Thermal transfer printer 1.26 x1.34 print area Additional Tooling for Bag Width Hot Stamp Ribbon Coder (THR25A) Stainless Steel Construction Quarto roller bag advance for making 4 sided bags $2,150 $1,695 $5,995 $7,850 $995 $1,600 $3,500 $1,500 Page 108

109 Vertical FFS-For Liquids High speed liquid & paste Vertical Form-Fill-Seal machine suitable for various low to medium viscosity liquids and paste like edible oils, fruit jam, ketchup, vinegar, shampoo, lotion or shower gels. Model Description PM-150L PM-52LP Vertical filling machine for liquid products, Servo motor film drive system. 5.7 touch screen. Panasonic PLC, photo eye, auto diagnostics, seal style 3 side or 4 sided seal, can use piston pump, magnetic pump, or rotary pump. Production speeds of BPM Fill range: 1-100ML (up to 3.38 oz) Bag length: 1.57 (40mm) to 7.87 (200mm) Bag width: 1.57 (40mm) to 3.75 (95mm) Vertical Sachet FFS machine for liquid products. 5.7 touch screen. Panasonic PLC, photo eye, auto diagnostics, seal style 3 side or 4 sided seal, rotary valve type volumetric filler. 20 litre hopper Production speeds of BPM Fill range: 1-44ML (up to 1.5 oz) Bag length: 1.57 (40mm) to 5.5 (140mm) Bag width: 1 (25mm) to 3.5 (90mm) $34,450 $17,500 PM-65LP Available Options Vertical Sachet FFS machine for liquid products, Servo motor film drive system. 7 touch screen. Panasonic PLC, photo eye, auto diagnostics, seal style 3 side or 4 sided seal, can use piston pump, magnetic pump, or rotary pump. Stainless Steel Construction Production speeds of BPM Fill range: 1-88ML (up to 3.0 oz) Bag length: 2 (50mm) to 11 (280mm) Bag width: 1.57 (40mm) to 5.5 (140mm) Stainless Steel Construction Hopper agitator with frequency regulator Pneumatic stop valve on spout-no leaks Additional forming device Hot stamp ribbon coder-thr25a (typeset 2x3mm) (Includes ribbon alarm) Video Jet 6250 Thermal Transfer Printer (1.26 x 1.34 ) print area. RP Series Rotary Transfer Pump for filling or transferring viscous and semi viscous liquids. (Mounted to stainless steel trolley with casters). $36,500 $3,500 $1,695 $ 750 $ 695 $1,600 $6,900 $5,895 Page 109

110 Optional Accessories: Weigh Scales Model Description PM-UW2 2 Head ultimate multi-head weigh scale with 5.7 color touch screen, high accuracy analog-digital load cell output, stepper motor drive, level sensor by load cell, 20 program memory, advanced mode selection with auto diagnostics. $10,995 Filling range: g (0.35 oz-105oz/ 6.56lbs) Weight accuracy: g Weighing speed: cycles/min Hopper capacity: 5000ml Bucket Capacity: 2000ml Power: 220 volt, 1 phase, 1kw UW 2 XL Head Linear weigh scale ( g fill range, speed 5-20, 1-10 g accuracy,15000ml bucket) PM-UW4 4 Head ultimate multi-head weigher with 5.7 color touch screen, high accuracy analog-digital load cell output, stepper motor drive, level sensor by load cell, 20 program memory, advanced mode selection with auto diagnostics. $12,500 $13,500 PM-UW10 Filling range: 5-200g (0.18oz-7oz) Weight accuracy: 0.2-2g (.07oz) Weighing speed: cycles/min Hopper capacity: 500ml Bucket Capacity: 500ml UW 4-L ( g fill range) (10-50 cycle rate) 3000ml bucket 10 Head multi-head weigh scale with 8.4 color touch screen, high accuracy analog-digital load cell, stepper motor drive. 99 program memory, stainless steel body Filling range: g (3.5oz-20oz) Weight accuracy: g (.017oz-.07oz) Weighing speed: 65 cycles/min Bucket capacity: 1600ml UW-10D Fill range (1500g) (45PPM) UW-10D-XL Fill range ( g) (50 PPM) $15,950 $21,500 $22,500 $23,500 Page 110

111 PM-UW14 14 Head ultimate multi-head weigh scale with 10.4 color touch screen, high accuracy analog-digital load cell, stepper motor drive. 99 program memory, stainless steel body Filling range: g (.35oz-28oz) Weight accuracy: g (.05oz) Weighing speed: up to 120 cycles/min Bucket capacity: 1600ml $31,500 UW-14D Fill range (2000g) (80ppm) UW-14DXL Fill range ( g) (up to 70 ppm) PM-UW16 16 Head ultimate multi-head weigh scale with 10.4 color touch screen, high accuracy analog-digital load cell, stepper motor drive. 99 program memory, stainless steel body $32,500 $33,500 $35,000 Filling range: g (.35oz-10.6oz) Weight accuracy: g (.035oz-.17oz) Weighing speed: up to 120 ppm Bucket capacity: 1600ml PM-UW20 20 Head ultimate multi-head weigh scale with 10.4 color touch screen, high accuracy analog-digital load cell, stepper motor drive. 99 program memory, stainless steel body $39,950 Filling range: g (.35-28oz) Weight accuracy: g (.035oz-.17oz) Weighing speed: up to 130 ppm Bucket capacity: 1600ml WR-32 Bowl Feeder with 320mm (12.5 ) diameter bowl $4,500 Page 111

112 Feeding Conveyors: Z Bucket Elevators ZET-183 Z-Bucket elevator will feed product into 10,14, 16 or 20 head weigh scale, Stainless steel construction with food grade plastic bucket, Variable speed drive. $15,950 Single bucket conveyor with 80L product hopper-stainless steel $9,285 SLT-100 Bucket Conveyor with 4.8 litre hopper $9,295 Feeding Conveyors: Incline Conveyors INC-132 Incline Conveyor - stainless steel, intra-lux belt, variable speed, vibration feeder with 60 litre hopper, conveyor capacity <5 CBM/Hr. Conveyor height 3.8m 220v $12,500 Discharge Conveyors: INC-52 INC-52 Product exit conveyor-stainless steel construction, food grade plastic mesh white color belting, intralox. $3,495* Working Platforms: For Vertical FFS machines PL-10 Platform for multi-head weigh scale, Stairway and gangway on 4 sides for ease of maintenance, Constructed of mild steel with PVC coated paint. $ 9,950 PL-5 Mini-Platform $5,995 PL-120 PL-120SS Platform for single weigher-powder coated carbon steel (4.75 x 4.75 tubing) 24 gangway on 4 sides Stainless Steel Construction $4,475 $8,900 Page 112

113 Auger Fillers: AG-95S AG-135S AG-165S AG-95L AG-135L AG-165L Auger filler The Model AG95-S is a Standalone auger filler for filling powder and granular products for cosmetics, pharmaceutical, chemical, agriculture, and/or food industries. It is equipped with a 7 color touch screen, self-feeding auger and range from 500 to 1000g. (16-36oz) or (6.6 Gallon Hopper) #304 Stainless Steel Construction grams (.35-98oz) (6.1 lbs) 13 gallon hopper grams Auger screw Filler driven by servo motor (Designed to connect to vertical FFS machine) The Model AG95-L is an auger filler to integrate with a form fill seal for filling powder and granular products for cosmetics, pharmaceutical, chemical, agriculture, and/or food industries. Range up to 1000 g. (36oz) Fill range: g Accuracy: + or 0.3-1% Hopper Volume: 20L Auger Cycle: 1.2s Construction: # 304 Stainless Steel Electrical: 220 volt, 1 phase 60hz g, 50 litre (13 gal) Hopper, 220 V, 1 phase 2.0kw grams $15,950 $21,250 $29,650 $14,950 $18,595 $27,185 Volumetric Fillers: To feed Vertical FFS machines GT-115 Turntable Volumetric Filler - Step less telescoping volume adjustment, stainless steel contact parts, level sensor for re-fill alarm, variable speed. Accuracy +/- 2.5% $7,500 G-420 Volumetric Filler Best used with rice, nuts etc. $7,250 Page 113

114 Screw Conveyors: To feed Vertical FFS machines SW-88 SW-118 SW-125 SW-131 Auger Screw conveyor feeds product to auger filler. Conveyor Capacity: 35 Cubic ft (264 gal) or 1,250 lbs per hour Conveyor Height: 1700mm (67 ) Hopper Capacity: 30 gallons (4 cubic ft) Construction: 304 Stainless Steel Electrical: 220 volt, 3 phase, 60hz Auger Screw conveyor feeds product to auger filler. Conveyor Capacity: 105 cubic ft (785 Gal/hr) or 3,695 lbs per hour Conveyor Height: 1700mm (67 ) Hopper Capacity: 60 Gallon (8 cubic ft) Construction: 304 Stainless Steel Electrical: 220 volt, 3 phase, 60hz Auger Screw conveyor feeds product to auger filler. Conveyor Capacity: 141 cubic ft (1056 Gal/hr) or 5,025 lbs per hour Conveyor Height: 2400mm (95 ) Hopper Capacity: 60 Gallon (8 cubic ft) Construction: 304 Stainless Steel Electrical: 220 volt, 3 phase, 60hz Auger Screw conveyor feeds product to auger filler. Conveyor Capacity: 176 cubic ft (1300 Gal/hour) or 6,200 lbs/hour Conveyor Height: 2400mm (95 ) Hopper Volume: 60 gallons (8 cubic ft) Construction: 304 Stainless Steel Electrical: 220 volt, 3 phase, 60hz $5,895 $7,900 $9,850 $12,500 Additional Options: Gusseted Bag Forming Device Triangle shaped finger push in on the side of the bag prior to sealing to create the side gusset. $1,595 Hot Stamp Printer Hopper Upgrade Model THR-35C 35mm high text (3 lines of type) Includes alarm. Air required Upgrade to 120 liter hopper for increase capacity and speed. $2,100 $695 Page 114

115 WEIGH SCALES OP-W-P Portion Scale OP-915 Bench Scale OP-918 Pallet Jack Scale OP-916 Floor Scale OPW-L Washdown Portion Bench Scale Features: Durability and Cleanliness in One Stylish Design Ideal for Food Processing and Harsh Environments Multiple weighing units: lb, oz, kg, g Large Stainless Steel Platter Warranty: 1 Year Product No. Capacity IP Rating Pan Size Height Material Weight Retail OPW-L-SS6 6kg x 0.2(g) 16" x 11" 4"/100mm All Stainless Steel 31 lbs $449* OPW-L-SS15 15kg x 0.5(g) IP 67 Washdown 16" x 11" 4"/100mm All Stainless Steel 31 lbs $495* OPW-L-SS30 30kg x 0.2(g) 16" x 11" 4"/100mm All Stainless Steel 31 lbs $525* OPF-P Series Part Counting Balances Features: Vibrating Technology provides the highest level of counting accuracy PLU for storing sample weights so they can be easily retrieved 30,000 displayed resolutions 3 displays (Weight, Unit Weight, Count) Truly portable with both AC adapter and rechargeable battery that lasts 100 hrs High visibility back-lit liquid crystal display (LCD) Durable ABS housing and large anti-static stainless steel pan Warning for insufficient unit piece weight and sample size Optional RS-232c for bi-directional communication with a PC or a printer Multiple weighing units: g, kg, lb, oz Model # OPF-P3 OPF-P6 OPF-P15 OPF-P30 Capacity 3kg 6kg 15kg 30kg Readability 0.1g 0.2g 0.5g 1g Dimension 13.5" x 13" x 4" / 34cm x 32cm x 9.5cm Pan Size 13.3" x 9" / 34cm x 22cm Power Input V AC adapter and Rechargeable battery (included) Ambient Temp C Weight 3.7 kg (8 lbs) Retail $295 $325 $350 $375 Page 115

116 OPF-N Series Precision Balances Features: Large removable stainless steel weighing platform Parts counting, percent weighing, and dynamic weighing Comes with a 9V rechargeable battery Large high contract back-lit liquid crystal display (LCD) Splash proof keyboard and display Anti-static stainless steel weighing pan and glass windshield Automatic zero-tracking and full range tare Calibration with reference weights Optional RS-232c for bi-directional communication with a PC or a printer Multiple weighing units: g, kg, lb, oz Model # OPF-N3 OPF-N7.5 OPF-N15 OPF-N30 Capacity 3kg 7.5kg 15kg 30kg Readability 0.1g 0.2g 0.5g 1g Repeatability ±0.1g ±0.2g ±0.5g ±1g Linearity ±0.2g ±0.5g ±1g ±2g Dimension 10.5" x 12.5" x 5.5" / 26cm x 32cm x 14cm Pan Size 11" x 8.5" / 26cm x 22cm Power 100V-240V AC adapter and rechargeable battery included Ambient Temp Weight 3.5 kg (8 lbs) Retail $295 $325 $350 $375 OPH-P Series Precision Electronic Balance Scale Features: Extremely high precision balance Large and wide angle backlit LCD display Splash proof keyboard and display Standard RS-232C for bi-directional communication with a PC or connecting directly to a printer Draftshield for preventing the influence of convection and other factors Multiple weighing units: G, Ct, lb, Oz, Ozt Dwt Warranty: 3 years limited Model # OPH-P103 OPH-P203 OPH-P303 Capacity 100g 200g 300g Readability 0.001g Repeatability ±0.002g Linearity ±0.002g Dimension 8" x 11" x 12" / 20x28x30cm Pan Size Φ 3.25" / 82mm Power Input 100V-240VAC (adapter included) Output 6vDC-9vDC/600mA Ambient Temp C Weight 2.7kgs (6 lbs) Retail $550 $595 $650 Page 116

117 OPK Series Compact Precision Balances / Kitchen Scale Features: Sturdy plastic construction with stainless steel pan Level bubble that makes it a high precision balance Quick and easy weighing in the lab or in the field Splash proof keyboard and display Multiple weighing units: G, Oz, CT 2 years limited warranty Model # OPK-P250 OPK-P500 OPK-P2500 OPK-P5000 OPK-S250 OPK-S500 OPK-S2500 OPK-S5000 Pan Material Plastic Stainless Steel Capacity 250g 500g 2500g 5000g 250g 500g 2500g 5000g Readability 0.1g 0.1g 1g 2g 0.1g 0.1g 1g 2g Repeatability 0.1g 0.1g 1g 2g 0.1g 0.1g 1g 2g Linearity 0.1g 0.1g 1g 2g 0.1g 0.1g 1g 2g Dimension 9" x 16" x 1.6" (23 x 40 x 4cm) Pan Size 7" x 7 (17.5 x 17.5cm 5.7" x 5.7" (14.5 x 14.5cm) Input 100V adapter or 4 AA batteries (not included) Power Output 6vDC-9vDC/600mA Ambient Temp C Weight 0.4 kgs (1 lb) Retail $60 $65 $70 $75 $75 $95 $105 $125 OP-915 Bench Scale Adjustable leveling Feet Durable structure w/over protection Stainless steel cover Warranty: 2 yrs on platform, 1 yr on electronics Rechargeable Battery NN=Not legal for trade Product No. Capacity IP Rating Pan Size Material Weight Retail OP lb x 0.02lb 12" x 12" C.S. deck; S.S. cover 26lbs $395* OP NN 100lb x 0.02lb Splashproof IP65 12" x 12" C.S. deck; S.S. cover 26lbs $450 OP lb x 0.05lb 16" x 16" C.S. deck; S.S. cover 31lbs $495* OP NN 300lb x 0.05lb 16" x 16" C.S. deck; S.S. cover 31lbs $450 OP-915S lb x 0.05lb Washdown IP67 16" x 16" All Stainless Steel 41lbs $895* OP lb x 0.05lb 16" x 20" C.S. deck; S.S. cover 38lbs $495* OP-915B lb x 0.1lb 18" x 24" C.S. deck; S.S. cover 87lbs $550* OP-915B lb x 0.2 lb 18" x 24" C.S. deck; S.S. cover 89lbs $595* OP-915BW lb x 0.1lb 18" x 24" C.S. deck; S.S. cover 90lbs $650* Splashproof IP65 OP-915BW lb x 0.2 lb 18" x 24" C.S. deck; S.S. cover 92lbs $695* OP lb x 0.1lb 24" x 24" C.S. deck; S.S. cover 66lbs $625* OP NN 500lb x 0.1lb 24" x 24" C.S. deck; S.S. cover 66lbs $550* OP lb x 0.2 lb 24" x 24" C.S. deck; S.S. cover 84lbs $695* OP-915S lb x 0.1lb Washdown IP67 24" x 24" All Stainless Steel 66lbs $995 OP-915-BW lb x 0.2lb Splashproof IP65 24" x 32" Diamond Plate cover 146lbs $695 *Asterisk indicates item in stock Page 117

118 Roller Ball Scale Model No. Capacity Pan Size Material NTEP Column H Shippng WT Cost OP-915BT lbx 0.05(lb) 16"x16" S.S. cover, Yes 16" 31 lbs $595 OP-915BT lb x 0.1(lb) 20"x20" M.S. Platform Yes 24" 41 lbs $680 OP-916 Floor Scale Optional Ramp Includes LED Readout Heavy Duty Ramp 4 x 4 $395 5 x 4 $425 NN=Not legal for trade Warranty: 2 yrs on platform, 1 yr on electronics Product No. Capacity Platform Construction Weight Retail OP-916-2x2-5 5,000 lb x 1 lb / 2500kg 2' x 2' x 3.5" (H) Welded Steel, tread plate 82 lbs $595 OP-916-2x2-5-NN 5,000 lb x 1 lb / 2500kg 2' x 2' x 3.5" (H) Welded Steel, tread plate 82 lbs $550 OP-916-3x3-5 5,000 lb x 1 lb / 2500kg 3' x 3' x 3.5" (H) Welded Steel, tread plate 194 lbs $795 * OP-916-3x3-5-NN 5,000 lb x 1 lb / 2500kg 3' x 3' x 3.5" (H) Welded Steel, tread plate 194 lbs $750 OP-916-4x4-2 2k lb x 0.5 lb / 1000kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 270 lbs $895* OP-916-4x4-5 5,000 lb x 1 lb / 2500kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 270 lbs $1,295* OP-916-4x4-5-NN 5,000 lb x 1 lb / 2500kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 250 lbs $1,195 OP-916S-4x4-5 5,000 lb x 1 lb / 2500kg 4' x 4' x 3.5" (H) All Stainless Steel, smooth top 270 lbs $1,895* OP-916-4x ,000 lb x 2 lb / 5000kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 270 lbs $1,395* OP-916-4x4-10-NN 10,000 lb x 2 lb / 5000kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 260 lbs $1,295 OP-916-4x4-10-PF 10,000 lb x 2 lb / 5000kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 320 lbs $1,395 OP-916-4x5-5 5,000 lb x 1 lb / 2500kg 4' x 5' x 3.5" (H) Welded Steel, tread plate 340 lbs $1,395* OP-916-4x ,000 lb x 2 lb / 5000kg 4' x 5' x 3.5" (H) Welded Steel, tread plate 340 lbs $1,495* OP-916-5x5-5 5,000 lb x 1 lb / 2500kg 5' x 5' x 3.5" (H) Welded Steel, tread plate 400 lbs $1,695* OP-916-5x5-5-NN 5,000 lb x 1 lb / 2500kg 5' x 5' x 3.5" (H) Welded Steel, tread plate 380 lbs $1,595 OP-916-5x ,000 lb x 2 lb / 5000kg 5' x 5' x 3.5" (H) Welded Steel, tread plate 420 lbs $1,795* OP-916-5x5-10-NN 10,000 lb x 2 lb / 5000kg 5' x 5' x 3.5" (H) Welded Steel, tread plate 400 lbs $1,695 OP-916-5x5-10-PF 10,000 lb x 2 lb / 5000kg 5' x 5' x 3.5" (H) Welded Steel, tread plate 480 lbs $1,695 OP-916-4x ,000 lb x 2 lb / 5000kg 4' x 6' x 3.5" (H) Welded Steel, tread plate 380 lbs $1,595 OP-916-5x ,000 lb x 2 lb / 5000kg 5' x 7' x 3.5" (H) Welded Steel, tread plate 500 lbs $1,895 OP-916-5x ,000 lb x 5 lb / 10000kg 5' x 7' x 3.5" (H) Welded Steel, tread plate 620 lbs $1,995 OP-916-4x ,000 lb x 2 lb / 5000kg 4' x 8' x 3.5" (H) Welded Steel, tread plate 470 lbs $1,895 OP-916-7x ,000 lb x 5 lb / 10000kg 7' x 7' x 3.5" (H) Welded Steel, tread plate 900 lbs $2,200 Page 118

119 OP-412T OP-412L Product No. Type Dimension Retail OP-412T Thermal Transfer 3 L x 2 W x 4H $199 OP-412M Dot Matrix 7.5 L x 4.5 W x 3.5 H $275 OP-412L Label Printer-Label size 2.25 x 1 (800 labels /roll) 7.5" L x 4.5 W x 3.5 H $345 OP-917 Drum Scale (built-in ramps) Features: -Large checkered safety plate platform with integral ramps -Ultra low profile -4 long integral ramped end -Warranty: 2 yrs on platform, 1 yr on electronics NTEP-Legal for Trade -Live rails, weighing directly or placing a pallet across the rails Product No. Capacity Weighing Platform Additional Features Weight Retail OP-917-PT lb x 0.2(lb) 30"(L) x 32"(W) x1.5"(h) Handles and wheels for easy move 135 lbs $1,195 OP-917-PT lb x 0.5(lb) 30"(L) x 32"(W) x1.5"(h) Handles and wheels for easy move 135 lbs $1,295 OP-917-HD lb x 1(lb) 52"(L) x 48"(W) x1.5"(h) Heavy duty, large platform size 305 lbs $1,495 OP-921 Drum Scale/Low Profile Scale with 2 Ramps Features: Ultra low profile with self-aligned two ramps Live side rails can weigh items that extend beyond the scale Warranty: 2 yrs on platform, 1 yr on electronics Includes: NTEP LED Display with Rechargeable Battery Options: Stainless Steel Construction (call for pricing) Product No. Capacity Weighing Platform D Shipping Weight Retail OP lbs 36" x 36" x 1.5"(H) 290 lbs $1,495 OP-918 Pallet Jack Scale Features: Unique and user-friendly design for you to work with Rechargeable battery lasts 72 hrs in operation Warranty: 2 years on platform, 1 yr on electronics LED display Options: Built-in printer: add $195 Product No. Capacity Weighing Platform Fork Height Weight Retail OP lb x 1 (lb) 4' x 2.5' 3" 360 lbs $1,695* OP lb x 1 (lb) 4' x 2.5' 3" 360 lbs $1,895* *Asterisk indicates item in stock Page 119

120 WEIGH FILL SCALES S-4 S-4 shown with S-5 Bulk Fill SB-20 continuous band sealer Can be used with bags or rigid containers to pack dry bulk product from powders to parts, 3.5 cu ft supply hopper, readout from 1 gram to.001 lbs, up to 10 lb, One year warranty MODEL DESCRIPTION S-4 All contact surfaces are stainless steel with powder coated chassis, self-adjusting bulk and dribble speed control, fill/hr, 120 volt, 5 amp,.25 cfm $7,500 PP-1120L Entry level Vertical continuous band sealer Right Feed, ½ HP motor, Dry Ink Coding, Sealing speed /min, 8mm wide seal, 11.8 wide conveyor. Stainless Steel Frame $5,295 SB-20 High Speed / High Quality continuous band sealer with $15,550 Shown in picture conveyor, left to right feed, sealing speeds of up to above 780 /min SB-20 Option Bag Top Trimmer $1,765 S-5 Bulk filling for weights up to 75 lbs, on the fly self adjusting bulk and dribble speed, fill/hour. $6,500 Page 120

121 WEIGH FILL SCALES S-6 Cascading Scale S-7 Dual Scale SLT-100 Bucket Conveyor MODEL DESCRIPTION S-6 The S-6 is designed to fill harder to run products like crackers, chips and other non-free flowing products. All contact surfaces are stainless steel with powder coated chassis. Cascading feed pan, 24 x 24 hopper (3.5cubic ft) controller range to 10 lbs, fill/hr, 120 volt, 5 amp, Air is.25 cfm at 30 psi S-7 Dual lanes for twice the speed, 36 x 24 (5.1 cubic ft) supply hopper can reach twice the speed of a standard S-4 unit. ( fill/hour) $11,750 $14,250 SLT-100 Bucket Conveyor to feed the supply hopper of the weigh scale. 4.8 litre hopper $9,250 Additional Options: Dribble Feed Gate Increases speed of machine $850 Fill Spouts Made to fit bag size. $ volt Non-Standard voltage $195 Page 121

122 X-Ray Inspection Equipment Model C3 Safeline Model X-33 MODEL DESCRIPTION C FDA Concept- 3 X-Ray system is specifically designed for the rapid automatic inspection of small to medium sized packaged products up to 10 W x 6 H. Includes pusher rejecter $62,475 C FDA Concept- 3 X-Ray system is specifically designed for the rapid automatic inspection of small to medium sized packaged products up to 14 W x 8 H. Includes pusher rejecter $74,995 C USDA Concept -4 X-Ray system is specifically designed for the rapid automatic inspection of small to medium sized packaged products up to 10 W x 6 H. where environmental conditions require high pressure and hygienic sanitizing. Includes pusher rejecter $81,350 C USDA Concept -4 X-Ray system is specifically designed for the rapid automatic inspection of small to medium sized packaged products up to 16 W x 8 H. where environmental conditions require high pressure and hygienic sanitizing. Includes pusher rejecter $98,175 C FDA Concept-5 X-Ray system is specifically designed for the rapid automatic inspection of jars, bottles, and other tall product up to 9 tall x 6 diameter. Includes pusher rejecter. $79,275 X-33 Mettler Toledo X-33 Series X-Ray machine is the most advanced X-Ray Call for Pricing machine on the market today with the ability to detect contaminants as small as 0.8mm at speeds up to 250 fpm all while using only 20watts of power. Page 122

123 Page 123

124 line of equipment by Excel Packaging Website: *Asterisk next to price means item in stock Prices subject to change without notice