Technical data Hydraulic crawler crane HS 885 HD. With Casagrande hydromills FD60 and FD100

Transcription

1 Technical data Hydraulic crawler crane HS 5 HD With Casagrande hydromills FD60 and FD100

2 Concept and characteristics HS 5 HD with hydromill Cable drum Constant tension winches Cooling system Crowd winch Filter system Powerful diesel engine Multi-function crane with optional free-fall winches: Hydromill crane Grab crane Service crane Engine: Hydraulic system: Maximum safety for hydraulic system through filtration of all hydraulic flows returning from hydromill. Lower risk of contamination with mud. Prevents downtime and expensive repairs. Powerful diesel engine 670 kw (9 hp). No additional power pack required for hydromill. Less investment. Less operational costs. Less maintenance costs. Cooling system: High cooling capacity. Operation at ambient temperature of up to 45 C at full engine power. Operation at ambient temperature of up to 50 C at 500 kw engine power. 2 HS 5 HD

3 Concept and characteristics HS 5 HD with hydromill Long frame Powerful chain drive Cutting wheel configurations for different soil formations Hydromill: Heavy construction of hydromill allows excellent penetration of difficult soils. Long frame provides outstanding guidance and verticality. Inclinometer with gyroscope to measure and indicate verticality and orientation. Verticality control via steering plates. Hydromill drive system: Powerful chain drive provides high torque and speed for the cutting wheels. Chain tensioner works as shock absorber. Full-face excavation through chain drive increases production rate. Chain drive allows cutting of panel joint. Cutting wheel configurations for different soil formations available. No gearbox required to power the cutting wheels. Quick exchange. Low maintenance costs. HS 5 HD 3

4 Set-up hydromill Steering plates Frame Guides Sensor box (gyroscope, inclinometer) Compensators with sensors Guide for joint Mud pump Chain Hydraulic motors Chisel Wheel assembly Hydromill selection FD 60 FD 100 mm Soil characteristics FD 60 FD 100 Uniaxial compressive strength MPa 4 HS 5 HD

5 Hydromill options FD 60 FD 100 L L B B 1 B B 1 Trench length (B) (B 1 ) FD 60 Length (L) Weight mm mm mm t 3200* Trench length (B) (B 1 ) FD 100 Length (L) Weight mm mm mm t 3200* Torque at wheel axle Wheel speed Suction pump knm rpm m³/h 2 x Torque at wheel axle Wheel speed Suction pump knm rpm m³/h 2 x Verticality control X axis Y axis Wheels and steering plates Steering plates Verticality control X axis Y axis Wheels and steering plates Steering plates *) Other trench widths upon request. HS 5 HD 5

6 Configuration and excavation depth Hose Tension System HTS Hose Drum System HDS FD 60 FD 100 Excavation depth 700 mm 70 m Excavation depth 00 mm 70 m 00 mm 64 m 1000 mm 64 m 1000 mm 64 m 1200 mm 64 m 1200 mm 5 m 1500 mm 5 m FD 60 FD 100 Excavation depth 700 mm 100 m Excavation depth 00 mm 100 m 00 mm 100 m 1000 mm 100 m 1000 mm 100 m 1200 mm 100 m 1200 mm 100 m 1500 mm 100 m Excavation depths Excavation depth Boom length Vertical extension 5 m 29 m 6 m 64 m 32 m 6 m 70 m 35 m 6 m 6 HS 5 HD

7 Control system and data recording Data evaluation - verticality Data evaluation - orientation C20 FD90 CASAGRANDE DIAFRAMMI CON LA BENNA A FRESA Parametri e traiettorie in perforazione (Contratto N C20) Data inizio : 03/20/2010 Data Fine : 03/20/2010 Larghezza benna : 1,20 m Ora inizio : Ora Fine : Lunghezza benna : 3,00 m Profondità max. : 77,92 m EXHAV 4.22/TG2TCT231IT Pannello N : P21R Velocità di avanzamento (m/h) (1/351) Deviazione X (cm) Deviazione Y (cm) Editing originale JEAN LUTZ S.A - Jurançon - France - pagina1/1 FORDRILL Start date Begin time (1/200) : 16/04/2011 : 0:14:24 X (10 in) 0 LIBERTY ((Contract N# : LIBERTY) CUTTING WHEELS DIAPHRAGM WALL Depth and deviation according to depth End date : 16/04/2011 Width bucket : 3,94 ft End time : 09:23:40 Length bucket : 10,33 ft Bottom level : 116,53 ft EXHAV 4.23/TG2HAV473EN Panel N# : LD1 D (1) A B Y Rot. Axis AD Axis BC (10 in) (5 in) 0 0 D -0,1 in C 0,0 in -0,3 d 0,0 in +0,2 in +0,1 d -0,1 in -0,6 d -0,1 in +0,4 in -0,6 d -0,1 in +0,5 in -0,5 d +0,4 in -0,5 d +0,2 in -0,6 d 0,0 in -0,6 d -0,4 in -0,6 d -0,4 in -0,1 d -0,1 in -0,4 in -0,4 d -0,4 in -0,7 d -0,5 d +0,3 d +0,4 in +0,9 d +1,0 in +0,9 d +1,0 in +0,5 d +0,5 in -0, in +0,3 d +0,4 in -0, in -0,1 d -0,1 in -0,9 in +0,4 d +0,4 in -0,9 in +0,5 d +0,5 in -1,0 in +0, d +0, in -1,0 in -0,3 d -1,0 in Rotation calibration... JEAN LUTZ S.A - Jurançon - France - page1/1 0,0 in +0,7 in +1,1 in +1,2 in +1,0 in +1,0 in +0,7 in 0,0 in +0,2 in -1,6 in -2,4 in -1,4 in -1,3 in -1,7 in -0,4 in -0,4 in -0, in -0, in 0,0 in -0, in +0,2 in +0,0 in 0,0 in -1,0 in -1,3 in -1,0 in -0,9 in -0,9 in -0, in -1,0 in -1,4 in -1,0 in -0,1 in -0,1 in -0,9 in -1,2 in -1,2 in +1,0 in -0,1 in -0,4 in -0,4 in -0,9 in Verticality measurement and recording Control panel hydromill Monitor hydromill Control unit in operator's cab Monitor crawler crane HS 5 HD 7

8 Liebherr-Werk Nenzing GmbH Dr. Hans Liebherr Str. 1, 6710 Nenzing/Austria Tel.: , Fax: facebook.com/liebherrconstruction HS 5 HD with Casagrande hydromill /2013 Subject to change without notice.