Hydraulic lift crane LR 1110 LR
|
|
- Stewart Webb
- 5 years ago
- Views:
Transcription
1 Hydraulic lift crane LR 111 EN LR 11.2
2 Concept and characteristics LR 111 Standard Excellent lifting capacities thanks to optimized distribution of forces New cabin with improved and ergonomic operating concept Convenient ladder to access the cabin Optimized air-conditioning and airflow in the cabin Catwalks and optional railings on uppercarriage and cabin Transport possible with mounted boom foot and crawlers Foldable catwalks remain with the machine during transportation Optional railings can be disassembled in a few steps using pin connections 2 LR
3 Option: LR 111 with swinging counterweight Up to 2% increase in lifting capacities where tilting is the limiting factor Larger radii thanks to improved stability Function of swinging counterweight: the rear counterweight splits in the centre and is swung backwards to a max. angle of 9. The counterweight can adopt any position within this angle range. The optimized lifting capacities are calculated online in real time via the LMI system and displayed in the operator s cab. Easy and quick adaptation of the counterweight to the lifting requirements Swinging counterweight requires less counterweight swinging back leads to improved ground pressure and similar lifting capacities to those with full counterweight in standard position can be achieved. Swinging the counterweight back makes the machine narrower this allows the machine to pass through narrow spaces. For increased lifting capacities the swinging counterweight can also be added to other LR 111 with standard counterweight LR
4 Dimensions Basic machine with undercarriage R R 4697 R Option: swinging counterweight Operating weight The operating weight includes the basic machine with crawlers, 2 main winches 12 kn and 14 m main boom, consisting of A-frame, boom foot (7 m), boom head (7 m), 34 t basic counterweight, 17.5 t carbody counterweight and 1 t hook block. Total weight approx t Ground pressure The actual ground pressure is calculated according to the configuration and position of the machine and displayed in the operator s cab. Using the optional Liebherr Crane-Planner the actual ground pressure, amongst other parameters, can already be calculated and displayed in the planning stage. Equipment Main boom (No xx) max. length 71 m Luffing jib (No. 139.xx) max. length 66.8 m Max. combination main boom 38 m and luffing jib 66.8 m Fixed jib (No. 86.xx) 32 m Auxiliary jib 3 t Remarks 1. The lifting capacities stated are valid for lifting operation only (corresponding with crane classification according to F.E.M crane group A1). 2. Crane standing on firm, horizontal ground. 3. The weight of the lifting device (hoisting ropes, hook block, shackle etc.) must be deducted form the gross lifting capacity to obtain a net lifting value. 4. Additional equipment on boom (e.g. boom walkways, auxiliary jib) must be deducted to get the net lifting capacity. 5. For max. wind speed please refer to lift chart in operator s cab or manual. 6. Working radii are measured from center of swing and under load. 7. The lifting capacities are valid for 36 degrees of swing. 8. Calculation of stability under load is based on DIN 1519 / part 2 / chart 1 and ISO 435 Table 1 + 2, tipping angle The structures are calculated according to F.E.M (EN 131-1; EN 131-2). 4 LR
5 Transport dimensions and weights Basic machine and boom (No xx) Basic machine with A-frame, 2x 12 kn crane winches, boom foot and crawlers, without basic counterweight 35 mm Weight without hoist rope 57 kg Weight of hoist rope 3.42 kg/m Boom section (No ) Weight incl. main boom pendants Weight incl. main boom and luffing jib pendants 3 m 161 mm 471 kg 537 kg Boom section (No ) Weight incl. main boom pendants Weight incl. main boom and luffing jib pendants 6 m 161 mm 76 kg 87 kg Boom section (No ) Weight incl. main boom pendants Weight incl. main boom and luffing jib pendants 12 m 161 mm 1392 kg 1612 kg 269 Boom head (No ) 7983 Weight incl. main boom pendants 1819 mm 219 kg Transport options Basic machine and crawlers Basic machine Option with A-frame, 2x 12 kn crane winches, boom foot, without basic counterweight and crawlers 35 mm Weight without hoist rope 375 kg Weight of hoist rope 3.42 kg/m Crawler Track pads Weight 2x 9 mm 914 mm 12 kg LR
6 Transport dimensions and weights Luffing jib (No. 139.xx) 2125 Luffing jib head (No ) 1392 mm 6289 Weight* 1115 kg 1182 Luffing jib section (No ) 3 m 1392 mm 3142 Weight* 32 kg Luffing jib section (No ) Weight* 6 m 1392 mm 51 kg Luffing jib section (No ) 11.7 m 139 mm Weight* 942 kg 2945 Luffing jib foot with A-frames (No ) 1624 mm 8925 Weight* 4183 kg *) Including pendants Fixed jib (No. 86.xx) Fixed jib head (No ) Weight* 92 mm 424 kg Fixed jib section (No ) Weight* 3 m 93 mm 145 kg Fixed jib section (No ) Weight* 6 m 928 mm 25 kg 1193 Fixed jib foot with A-frame (No. 86.2) 18 mm 6927 Weight* 1237 kg *) Including pendants 6 LR
7 Transport dimensions and weights Counterweight 467 Counterweight 12x 945 mm 932 Weight 15 kg 121 Standard counterweight 1x 1475 mm 527 Weight 16 kg 1591 Swinging counterweight option Weight 1x 1475 mm 16 kg 527 Carbody counterweight 2x Standard 164 mm 84 Weight 75 kg 196 Carbody counterweight 2x Standard 153 mm Weight 125 kg Hooks t hook block 7 sheaves 823 mm 2195 Weight 4 kg 77 1 t hook block 5 sheaves 74 mm 1889 Weight 23 kg 8 t hook block 3 sheaves mm 1815 Weight 2 kg 4 t hook block 1 sheave Weight 48 mm 15 kg 12.5 t single hook 4 4 mm 1116 Weight 6 kg LR
8 Boom combinations 5.5 m (18 ft) No m (38 ft) No m (18 ft) No m (38 ft) No m (2 ft) No m (23 ft) No m (4 ft) No m (2 ft) No m (2 ft) No m (1 ft) No m (18 ft) No m (38 ft) No m (38 ft) No m (4 ft) No m (23 ft) No m (4 ft) No m (2 ft) No m (1 ft) No m (18 ft) No m (4 ft) No m (23 ft) No m (4 ft) No m (4 ft) No m (4 ft) No m (2 ft) No m (1 ft) No m (23 ft) No m (4 ft) No m (1 ft) No m (23 ft) No m (4 ft) No m (23 ft) No Main boom No xx 71 m Max. combination 85 m Max. combination 14.8 m Main boom No xx 53 m Fixed jib No. 86.xx 32 m Main boom No xx 38. m Luffing jib No. 139.xx 66.8 m Max. combination 98.8 m Main boom No xx 41. m Luffing jib No. 139.xx 57.8 m 8 LR
9 Technical description Engine Power rating according to ISO 9249, 23 kw (38 hp) at 17 rpm Engine type Liebherr D 944 A7 SCR Fuel tank 85 l capacity with continuous level indicator and reserve warning Engine complies with NRMM exhaust certification EPA/CARB Tier 4f and 97/68 EC Stage IV. Hydraulic system A double axial displacement pump supplies the open loop hydraulic system, allowing all functions to be operated simultaneously. To minimize peak pressure an automatic working pressure cut off is integrated in the pump. All filters are electronically monitored. The use of synthetic environmentally friendly (biodegradable) oils is possible. Working pressure max. 35 bar Oil tank capacity 685 l Luffing jib winch Line pull (5 th layer) 82 kn Rope diameter 2 mm Jib luffing 46 sec. from 15 to 78 Main winches Line pull (4 th layer) 12 kn Rope diameter 26 mm Diameter (1 st layer) 58 mm Rope speed 136 m/min Rope capacity in 4 layers 256 m The winches are outstanding in their compact design and easy assembly. Propulsion is via a planetary gearbox in an oil bath. Load support by the hydraulic system; additional safety factor provided by a spring loaded, multi disc holding brake. The main winches use pressure controlled, variable flow hydraulic motors. This system features sensors that automatically adjust oil flow to provide max. winch speed depending on load. Option winch with free-fall system: Clutch and braking functions on the free-fall system are provided by a compact designed, low wear and maintenance-free multi disc brake. Control The heart of the hydraulic crawler cranes is the Liebherr control system which has been developed and manufactured in-house. It includes all control and monitoring functions and is designed to withstand extreme environmental conditions and heavy duty construction tasks. Complete machine operating data as well as warning signals and irregularities are clearly displayed on the high resolution monitor in the operator s cab in the required language. The electro-hydraulic proportional control allows several movements to be performed simultaneously. This ensures that all categories of loads can be positioned with utmost precision. Boom winch Line pull (6 th layer) 86 kn Rope diameter 2 mm Boom luffing 44 sec. from 15 to 86 Crawlers Propulsion through axial piston motor, hydraulically released spring loaded multi disc brake, crawler tracks, hydraulic chain tensioning device. Track pads 9 mm Drive speed max. 2.8 km/h Swing Consists of rollerbearing with external teeth, swing drive with fixed axial piston hydraulic motor, spring loaded and hydraulically released multi disc holding brake, planetary gearbox and pinion. Both swing modes are possible speed control or free swing. A multi disc holding brake acts automatically at zero swing motion. Swing speed from 2.1 rpm continuously variable. Noise emission Noise emissions correspond with 2/14/EC directive. Guaranteed sound pressure level L PA in the cabin 71 db(a) Guaranteed sound power level L WA 16 db(a) Vibration transmitted to the hand-arm system of the machine operator < 2.5 m/s 2 Vibration transmitted to the whole body of the machine operator <.5 m/s 2 LR
10 Main boom (No xx) 34 t counterweight and 17.5 t carbody counterweight ft 28 m 88 Auxiliary jib 3 t m 68 m 65 m 62 m 59 m 56 m 53 m 5 m 47 m 44 m 41 m 38 m 35 m 32 m 29 m 26 m 23 m 2 m 17 m 14 m 86 2 The maximum capacity of the auxiliary jib is 3 t. The corresponding load chart is programmed in the LMI system m ft Main boom configuration (No xx) Configuration for boom lengths between 14 m and 71 m Length Amount of boom extensions Boom foot 7 m Boom insert 3 m Boom insert 6 m Boom insert 12 m Boom head 7 m Boom length (m) Auxiliary jib applicable 1 LR
11 Lift chart for main boom (No xx) 34 t counterweight and 17.5 t carbody counterweight TLT M V7 Capacities in metric tonnes for boom lengths (14 m - 71 m) with 12 kn winches Boom length in (m) Radius Radius t t t t t t t t t t t t t t t t (m) t swinging counterweight 9 and 17.5 t carbody counterweight TLT M V7 Capacities in metric tonnes for boom lengths (17 m - 71 m) - with 12 kn winches Boom length in (m) Radius Radius t t t t t t t t t t t t t t t (m) Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR
12 Working range luffing jib (No. 139.xx) Main boom ft 36 m m 63.8 m m 57.8 m m 52.1 m 49.1 m 46.1 m 43.4 m 4.4 m 37.4 m 34.4 m 31.7 m 28.7 m 25.7 m 22.7 m m 38 m 35 m 32 m 29 m 26 m 23 m 2 m 17 m m ft Boom configuration for main boom lengths (17 m 41 m) see table on page 1 Jib configuration for jib lengths (22.7 m 66.8 m) Length Amount of luffing jib extensions Luffing jib foot 5.5 m Luffing jib insert 3 m Luffing jib insert 6 m Luffing jib insert 11.7 m Luffing jib head 5.5 m Luffing jib length (m) LR
13 Lift chart luffing jib (No. 139.xx) Main boom angle 88, standard counterweight TLT M V7 Main boom 17 m t t t t Main boom 23 m t t t t Main boom 29 m t t t t Main boom 35 m t t t t Main boom 38 m t t t t Main boom 41 m Radius t t Capacities in metric tonnes with luffing jib (No. 139.xx) 34 t counterweight t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR
14 Lift chart luffing jib (No. 139.xx) Main boom angle 83, standard counterweight TLT M V7 Main boom 17 m t t t t Main boom 23 m t t t t Main boom 29 m t t t t Main boom 35 m t t t t Main boom 38 m t t t t Main boom 41 m Radius t t Capacities in metric tonnes with luffing jib (No. 139.xx) 34 t counterweight t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 14 LR
15 Lift chart luffing jib (No. 139.xx) Main boom angle 75, standard counterweight TLT M V7 Main boom 17 m t t t t Main boom 23 m t t t t Main boom 29 m t t t t Main boom 35 m t t t t Main boom 38 m Radius t t t Main boom 41 m Radius t t Capacities in metric tonnes with luffing jib (No. 139.xx) 34 t counterweight t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR
16 Lift chart luffing jib (No. 139.xx) Main boom angle 65, standard counterweight TLT M V7 Main boom 17 m t t t t Main boom 23 m Radius t t t Main boom 29 m Radius t Main boom 35 m Radius Main boom 38 m Radius (m) t t t Main boom 41 m Radius (m) t t t Capacities in metric tonnes with luffing jib (No. 139.xx) 34 t counterweight t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 16 LR
17 Lift chart luffing jib (No. 139.xx) Main boom angle 45, standard counterweight TLT M V7 Main boom 17 m Radius Main boom 23 m Radius (m) t t t Main boom 41 m Radius 22.7 (m) t Main boom 32 m Radius 22.7 (m) t Capacities in metric tonnes with luffing jib (No. 139.xx) 34 t counterweight t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR
18 Working range luffing jib (No. 139.xx) Main boom angle 88 45, swinging counterweight 9 ft 36 m m 63.8 m m 57.8 m m 52.1 m 49.1 m 46.1 m 43.4 m 4.4 m 37.4 m 34.4 m 31.7 m 28.7 m 25.7 m 22.7 m m 38 m 35 m 32 m 29 m 26 m 23 m 2 m 17 m m ft Boom configuration for main boom lengths (17 m 41 m) see table on page 1 Jib configuration for jib lengths (22.7 m 66.8 m) Length Amount of luffing jib extensions Luffing jib foot 5.5 m Luffing jib insert 3 m Luffing jib insert 6 m Luffing jib insert 11.7 m Luffing jib head 5.5 m Luffing jib length (m) LR
19 Lift chart luffing jib (No. 139.xx) Main boom angle 88, swinging counterweight 9 TLT M V7 Main boom 17 m t t t t Main boom 23 m t t t t Main boom 29 m t t t t Main boom 35 m t t t t Main boom 38 m t t t t Main boom 41 m Radius t t Capacities in metric tonnes with luffing jib (No. 139.xx) 34 t counterweight t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR
20 Lift chart luffing jib (No. 139.xx) Main boom angle 83, swinging counterweight 9 TLT M V7 Main boom 17 m t t t t Main boom 23 m t t t t Main boom 29 m t t t t Main boom 35 m t t t t Main boom 38 m t t t t Main boom 41 m Radius t t Capacities in metric tonnes with luffing jib (No. 139.xx) 34 t counterweight t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 2 LR
21 Lift chart luffing jib (No. 139.xx) Main boom angle 75, swinging counterweight 9 TLT M V7 Main boom 17 m t t t t Main boom 23 m t t t t Main boom 29 m t t t t Main boom 35 m t t t t Main boom 38 m t t t t Main boom 41 m Radius t t Capacities in metric tonnes with luffing jib (No. 139.xx) 34 t counterweight t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR
22 Lift chart luffing jib (No. 139.xx) Main boom angle 65, swinging counterweight 9 TLT M V7 Main boom 17 m t t t t Main boom 23 m t t t t Main boom 29 m Radius t t t Main boom 35 m Radius t Main boom 38 m Radius t Main boom 41 m Radius Capacities in metric tonnes with luffing jib (No. 139.xx) 34 t counterweight t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 22 LR
23 Lift chart luffing jib (No. 139.xx) Main boom angle 45, swinging counterweight 9 TLT M V7 Main boom 17 m Radius t Main boom 23 m Radius Main boom 29 m Radius (m) t t Main boom 32 m Radius 22.7 (m) t Capacities in metric tonnes with luffing jib (No. 139.xx) 34 t counterweight t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR
24 Working range - fixed jib 15 and 3 (No. 86.xx) Main boom ft 315 m m 29 m 26 m 23 m 2 m m 14 m 11 m m 5 m 47 m 44 m 41 m 38 m 35 m 32 m 29 m 26 m 23 m 2 m m ft Boom configuration for boom lengths (2 m 59 m) see table 1 on page 1 Fixed jib configuration for fixed jib lengths (11 m 32 m) Length Amount of fixed jib extensions Fixed jib foot 5.5 m Fixed jib insert 3. m Fixed jib insert 6. m Fixed jib head 5.5 m Fixed jib length (m) LR
25 Lift chart - fixed jib (No. 86.xx) Offset 15, standard counterweight TLT M V7 Main boom 2 m Main boom 26 m Main boom 29 m Main boom 32 m Main boom 38 m Main boom 44 m Main boom 5 m Main boom 53 m Main boom 59 m Radius Capacities in metric tonnes with fixed jib (No. 86.xx), 34 t counterweight t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR
26 Lift chart - fixed jib (No. 86.xx) Offset 3, standard counterweight TLT M V7 Main boom 17 m Main boom 26 m Main boom 29 m Main boom 32 m Main boom 38 m Main boom 44 m Main boom 5 m Main boom 53 m Main boom 59 m Radius Capacities in metric tonnes with fixed jib (No. 86.xx), 34 t counterweight t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 26 LR
27 Working range - fixed jib 15 and 3 (No. 86.xx) Main boom 88 45, swinging counterweight 9 ft 315 m m 29 m 26 m 23 m 2 m m 14 m 11 m m 5 m 47 m 44 m 41 m 38 m 35 m 32 m 29 m 26 m 23 m 2 m m ft Boom configuration for boom lengths (2 m 59 m) see table 1 on page 1 Fixed jib configuration for fixed jib lengths (11 m 32 m) Length Amount of fixed jib extensions Fixed jib foot 5.5 m Fixed jib insert 3. m Fixed jib insert 6. m Fixed jib head 5.5 m Fixed jib length (m) LR
28 Lift chart - fixed jib (No. 86.xx) Offset 15, swinging counterweight 9 TLT M V7 Main boom 2 m Main boom 26 m Main boom 29 m Main boom 32 m Main boom 38 m Main boom 44 m Main boom 5 m Main boom 53 m Main boom 59 m Radius Capacities in metric tonnes with fixed jib (No. 86.xx), 34 t counterweight t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 28 LR
29 Lift chart - fixed jib (No. 86.xx) Offset 3, swinging counterweight 9 TLT M V7 Main boom 2 m Main boom 26 m Main boom 29 m Main boom 32 m Main boom 38 m Main boom 44 m Main boom 5 m Main boom 53 m Main boom 59 m Radius Capacities in metric tonnes with fixed jib (No. 86.xx), 34 t counterweight t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR
30 Notes 3 LR
31 Notes LR
32 Liebherr-Werk Nenzing GmbH Dr. Hans Liebherr Str. 1, A-671 Nenzing/Austria Tel.: Fax: LR Version 3 6/218 Subject to change without notice.
Crawler Crane LR
Crawler Crane LR 1130 EN LR 1002.03 Dimensions Basic machine with undercarriage R 6530 2970 85 6050 3040 1954 1530 3640 1250 6750 7970 3355 1360 1000 6350 440 1345 R 5700 13930 5310 Operating weight The
More informationCrawler Crane LR 1200 LR
Crawler Crane LR 1200 EN LR 1004.02 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 4600 1500 7520 8700 3740 1830 1200 7000 520 1345 R 6200 19200 7600 1200 5800 narrow
More informationCrawler Crane LR 1250 LR
Crawler Crane LR 1250 EN LR 1004.02 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 1345 4600 1500 7520 8700 3740 1830 1200 7000 520 R 6200 19200 7600 1200 5800 narrow
More informationView thousands of Crane Specifications on FreeCraneSpecs.com. Technical data Hydraulic lift crane LR 1250
Technical data Hydraulic lift crane LR 1250 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 1345 4600 1500 7520 8700 3740 1830 1200 7000 520 R 6200 19200 7600 1200 5800
More informationTechnical data Hydraulic lift crane LR 1160
Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600
More informationTechnical data Hydraulic lift crane LR 1160
Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600
More informationGround bearing pressure 1.14 kg/cm 2. Main boom (No xx) max. length High reach (1311.xx and 1008.xx) 83 m Luffing jib (No xx) max.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 14 m main boom, consisting of A frame, boom foot (5.5 m), boom head (8.5 m), 32.3 t basic counterweight, 15 t carbody
More information6. Working radii are measured from centre of swing and under load.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 20 m main boom, consisting of A frame, boom foot (7 m), boom head (7 m), boom extension (6 m), 60.6 t basic counterweight,
More informationGround bearing pressure 1.08 kg/cm 2. Main boom (No xx) max. length High reach (No xx and 1309.xx)
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 17 m main boom, consisting of A frame, boom foot (7 m), boom head (10 m), 50.9 t basic counterweight, 20 t carbody
More information5. For max. wind speed please refer to lift chart in operator s cab or manual.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn including wire ropes (260 m and 495 m) and 20 m main boom, consisting of A frame, boom foot (10 m), boom head (7 m),
More informationTechnical data Hydraulic crawler crane HS 8040 HD
Technical data Hydraulic crawler crane HS 8040 HD Dimensions Basic machine with undercarriage 2860 7350 3000 1700 1060 3300 1200 2340 4610 5460 R = 3900 700 4200 310 4200 990 11240 Operating weight The
More informationTechnical data Hydraulic lift crane LR 1300 W
Technical data Hydraulic lift crane LR 1300 W Dimensions Basic machine with undercarriage 6390 3000 10570 1475 1760 20 5160 3820 8520 9675 520 4260 1700 1200 00 20 7100 520 00 9 R6 8560 20365 Operating
More informationTechnical data Hydraulic lift crane LR 1300 LR 1300
Technical data Hydraulic lift crane LR 1300 LR 1300 Dimensions Basic machine with undercarriage R 9750 3600 10350 6930 3000 LR1300 2250 1600 5000 1465 1700 8500 9650 4260 1870 1200 8000 400 R 6980 Optional:
More informationTechnical data Hydraulic lift crane LR 1300
Technical data Hydraulic lift crane LR 1300 Dimensions Basic machine with undercarriage R 9750 3600 10350 6930 3000 2250 5000 LR 1300 1600 1465 1700 8500 9650 4260 1870 1200 8000 400 R 6980 Optional: Flat
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with crawlers, 2 main winches 26,500 lbs and 46 ft main boom, consisting of A frame, boom foot (18 ft), boom head (28 ft), 71,200 lbs basic counterweight,
More informationTechnical data Hydraulic crawler crane HS 835 HD
Technical data Hydraulic crawler crane HS 835 HD Dimensions Basic machine with undercarriage 2860 7360 3000 1700 1120 3260 990 1200 2360 4710 5650 1220 700 4300 310 R 4050 11250 Operating weight The operating
More information2. Crane standing on firm, horizontal ground. 6. Working radii are measured from centre of swing and under load.
The operating weight includes the basic machine with crawlers, 2 main winches 26,500 lbs including wire ropes (853 ft and 1624 ft) and 66 ft main boom, consisting of A frame, boom foot (33 ft), boom head
More informationTechnical data Hydraulic crawler crane HS 895 HD
Technical data Hydraulic crawler crane HS 895 HD Dimensions Basic machine with undercarriage R 9760 3650 10000 5480 3675 2445 1810 3950 1610 1700 7945 9360 3975 1720 R 6360 1100 6800 620 17380 Operating
More informationTechnical data Hydraulic crawler crane HS 875 HD
Technical data Hydraulic crawler crane HS 875 HD Dimensions Basic machine with undercarriage R 5710 2580 8300 3500 2110 1300 1240 4020 1400 5330 2600 1000 530 6480 2240 4900 R 5520 14100 Operating weight
More informationTechnical data Hydraulic crawler crane HS 885 HD
Technical data Hydraulic crawler crane HS 885 HD Dimensions Basic machine with undercarriage R 6910 2850 8300 3500 2210 1420 4120 1400 1400 2725 5490 6750 2100 1000 4920 590 R 5520 15200 Operating weight
More informationTechnical data Hydraulic crawler crane HS 845 HD
Technical data Hydraulic crawler crane HS 845 HD Dimensions Basic machine with undercarriage 2870 8000 3000 1800 1330 3350 1100 1200 5000 5920 2500 1590 700 4500 330 R 4580 11860 Operating weight The operating
More informationConstruction Machine HS 8130 HD. enus HS
Construction Machine HS 8130 HD enus HS 8005.01 Dimensions Basic machine with standard undercarriage 10 11 32 4 17 3 88.6 63 13 59 18 8 11 39.4 12.6 22 1 20 3 54.3 7 R 18 1 17 11 46 3 Operating weight
More informationGround bearing pressure 0.98 kg/cm 2. Main boom (No xx) max. length Fixed jib (No xx)
The operating weight includes the basic machine with HD under carriage, 2 main winches 250 kn including wire ropes (90 m) and 11 m main boom, consisting of A frame, boom foot (5.5 m) and boom head (5.5
More informationConstruction Machine HS 8300 HD. enus HS
Construction Machine HS 8300 HD enus HS 8008.01 Dimensions Basic machine with undercarriage R 35 11 12 43 8 13 11 11 7 10 7 2 19 6 7 3 26 31 4 12 8 9 11 47.2 22 8 27 1 25.2 71 R 25 8 Operating weight The
More informationConstruction Machine HS enus HS
Construction Machine HS 8200 enus HS 8007.01 Concept and characteristics Basic machine HS 8200 with dragline equipment Main boom 2220.24 Pendant straps Hoist rope guide Hoist winch I Cabin Undercarriage
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 200 kn including wire ropes (90 m) and 11 m main boom, consisting of A frame, pulley block, boom foot (5.5 m) and boom
More informationGround bearing pressure. Main boom (No xx) max. length Fixed jib (No xx)
The operating weight includes the basic machine with HD undercarriage, 2 main winches 55,200 lbs including wire ropes (295 ft) and 36 ft main boom, consisting of A frame, boom foot (18 ft) and boom head
More informationGround bearing pressure 1.1 kg/cm 2 2 HS 855 HD
The operating weight includes the basic machine with HD undercarriage, 2 main winches 250 kn including wire ropes (90 m) and 18 m main boom, 2x hose reels (1 m), each with 120 m of hydraulic hose, consisting
More informationPiling Rig LRH 100 LRH
Piling Rig LRH 1 EN LRH 31.5 Concept and characteristics LRH 1 Leader top Leader top for auxiliary rope Auxiliary rope Leader Leader ball joint Hydraulic hammer Rope guide Boom Radius adjustment device
More informationPiling Rig LRH 100 LRH
Piling Rig LRH 1 EN LRH 31.5 Concept and characteristics LRH 1 Dimension and weights LRH 1 18.4 18.4 18.4 18.4 19 1998-243 6 45 875 368 R 376 9 44 545 Technical data Total height 19.98-24.3 m Max. pile
More informationDrilling Rig LB LB
Drilling Rig LB 16-18 EN LB 1.6 Concept and characteristics Leader top for Kelly rope Leader top for auxiliary rope Kelly rope Kelly Rotary Inclination device Special "Low Head" Auxiliary winch Standard
More informationDrilling Rig LB LB
Drilling Rig LB 4-7 EN LB 3.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Auxiliary winch Radius adjustment
More informationTechnical data Drilling rig LB 24
Technical data Drilling rig LB 24 Concept and characteristics Kelly rope Leader top for Kelly rope Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Kelly bar Inclination device
More informationPiling and drilling rig LRB Courtesy of Machine.Market
Piling and drilling rig LRB 16 EN 51.6 Concept and characteristics LRB 16 Leader top Auxiliary winch Leader 1.5 m Leader vertical travel device Attachment with quick connection Leader inclination device
More informationTechnical data Piling rig LRH 100
Technical data Piling rig LRH 1 Concept and characteristics Leader top for auxiliary rope Leader top Hydraulic hammer Auxiliary rope Leader Rope guide Leader ball joint Radius adjustment device Boom Pile
More informationPiling and drilling rig LRB 16 LRB
Piling and drilling rig LRB 16 EN LRB 51.6 Concept and characteristics LRB 16 Leader top Auxiliary winch Leader 1.8 m Leader vertical travel device Attachment with quick connection Leader inclination device
More informationPiling and drilling rig LRB
Piling and drilling rig LRB 15 51.4 Concept and characteristics LRB 15 Leader top Auxiliary winch Leader 1.5 m Vertical travel device Attachment with quick connection Inclination device Leader rotation
More informationPiling and drilling rig LRB 355 LRB
Piling and drilling rig LRB 355 EN LRB 54.5 Concept and characteristics LRB 355 Leader top adjustable incl. aux. winch 8 kn Vertical travel device Leader. m Inclination device Attachment with quick connection
More informationTechnical data Drilling rig LB 28
Technical data Drilling rig LB 28 Concept and characteristics Kelly rope Leader top for Kelly rope Leader top for auxiliary rope Tensioning cylinder for crowd system Kelly bar Inclination device Rotary
More informationTechnical data Piling rig LRH 100
Technical data Piling rig LRH 100 Concept and characteristics Leader top for auxiliary rope Leader top Hydraulic hammer Auxiliary rope Rope guide Leader ball joint Boom Leader Radius adjustment device
More informationPiling and drilling rig LRB 18. enus LRB
Piling and drilling rig LRB 18 enus LRB 51.6 Concept and characteristics LRB 18 Leader top Auxiliary winch Leader 49. ft Leader vertical travel device Attachment with quick connection Leader inclination
More informationTechnical data Drilling rig LB 20
Technical data Drilling rig LB 20 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly bar Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Inclination device
More informationTechnical data Drilling rig LB 16
Technical data Drilling rig LB 16 Concept and characteristics Leader top for auxiliary rope Leader top for Kelly rope Kelly Kelly rope Tensioning cylinder for crowd system Rotary Inclination device Casing
More informationTechnical data Drilling rig LB 24
Technical data Drilling rig LB 24 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly bar Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Inclination device
More informationTechnical data Piling and drilling rig LRB 255
Technical data Piling and drilling rig LRB 255 Concept and characteristics Leader top for auxiliary rope Rope crowd system Tool with quick connection Auxiliary winch Leader Lateral inclination device Leader
More informationDrilling Rig LB LB Courtesy of Crane.Market
Drilling Rig LB 36-41 EN LB 25.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment
More informationTechnical data Drilling rig LB 28
Technical data Drilling rig LB 28 Concept and characteristics Kelly rope Leader top for Kelly rope Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Kelly bar Inclination device
More informationTechnical data Drilling rig LB 28
Technical data Drilling rig LB 28 Concept and characteristics Kelly rope Leader top for Kelly rope Leader top for auxiliary rope Tensioning cylinder for crowd system Kelly bar Inclination device Rotary
More informationPiling and drilling rig LRB
Piling and drilling rig LRB 355 54.5 Concept and characteristics LRB 355 Leader top adjustable incl. aux. winch 8 t Vertical travel device Leader. m Inclination device Attachment with quick connection
More informationDrilling Rig LB LB
Drilling Rig LB 28-32 EN LB 24.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment
More informationDrilling Rig LB LB
Drilling Rig LB 2-23 EN LB 22.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Auxiliary winch Radius adjustment
More informationDrilling Rig LB enus LB
Drilling Rig LB 44-51 enus LB 26.5 Concept and characteristics Leader top for Kelly rope (drilling axis - 4.6 ft) Leader top for auxiliary rope Kelly rope Kelly Inclination device Crowd winch Rotary (drilling
More informationTechnical data Piling and drilling rig LRB 125
Piling and drilling rig LRB 125 Concept and characteristics Leader top Auxiliary winch Leader Vertical travel device Tool with quick connection Inclination device Leader rotation device Parallel kinematics
More informationTechnical data Drilling rig LB 24
Technical data Drilling rig LB 24 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly bar Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Inclination device
More informationDrilling Rig LB enus LB
Drilling Rig LB 36-41 enus LB 25.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment
More informationTechnical data Piling and drilling rig LRB 125 XL
Piling and drilling rig LRB 125 XL Concept and characteristics Leader top Auxiliary winch Leader Vertical travel device Tool with quick connection Inclination device Leader rotation device Parallel kinematics
More informationDrilling Rig LB enus LB
Drilling Rig LB 28-32 enus LB 24.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment
More informationTechnical data Rotary drilling rig LB
Technical data Rotary drilling rig LB 24-27 Concept and characteristics LB 24 Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Auxiliary
More informationPiling and drilling rig LRB 355. enus LRB
Piling and drilling rig LRB 355 enus LRB 54.5 Concept and characteristics LRB 355 Leader top adjustable incl. aux. winch 18, lbf Vertical travel device Leader 7.8 ft Inclination device Attachment with
More informationTechnical data Drilling rig LB 28
Technical data Drilling rig LB 28 Concept and characteristics Kelly rope Leader top for Kelly rope Leader top for auxiliary rope Tensioning cylinder for crowd system Kelly bar Inclination device Rotary
More informationLRB 125. Technical data Piling and drilling rig. Courtesy of Crane.Market
Technical data Piling and drilling rig Dimensions Basic machine Technical Data Leader length Capacity: hammer including cap plus pile Max. hammer weight Max. pile weight Max. pull Max. torque Working radius
More informationDrilling Rig LB enus LB
Drilling Rig LB 24-27 enus LB 23.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Auxiliary winch Radius adjustment
More informationLoad capacity charts
charts HS 855 HD These calculations meet the requirements of ANSI B30.5 (incl. SAE J987 and SAE J765). The machine classification for lifting operations acc. ISO 4301/1 and /2 given by the manufacturer
More informationCrawler Crane LR 1400/2
Crawler Crane LR 0/2 Technical Data LIGHT BOOM SYSTEM 53-20 44th Street Maspeth, Queens, NY 11378 (718) 784-1776 Table of contents Technical Data Technical description Crawler travel gear, Crane superstructure,
More informationSheave head. Auxiliary winch. Leader
Sheave head Rope crowd system (RDS) Auxiliary winch Tool with quick connection Lateral inclination device Leader Leader support arm Longitudinal inclination device Vertical travel device Support arm brace
More informationHydraulic Crawler Crane
Hydraulic Crawler Crane Model : CKE1350G-2 Max. Lifting Capacity : 150 t x 4.4 m * Max. Lifting Capacity With Luffing Jib: 36.0 t x 12.0 m Max. Crane oom Length : 76.2 m Max. Luffing oom Length: 47.9 m
More informationTechnical data Hydraulic lift crane LR Courtesy of Crane.Market
Technical daa Hydraulic lif crane Complies wih ANSI/ASME B 0.5 LR Serial number 5xxx Couresy of Crane.Marke Dimensions Basic machine wih undercarriage R 8 0 7 9 0 9 0 6 0.5 59 8 8 7 5 6 7 5 7. 6 R 0 7.
More informationMODEL CKE2500-II TON CAPACITY
LIFTING CHARTS - Crawler Cranes KOBELCO MODEL - 275 TON CAPACITY Luffing Jib Working Ranges Boom Angle: 88 125 54.9 m 51.8 m 48.8 m 45.7 m 42.7 m 39.6 m 3 m 33.5 m 30.5 m 57.9 m 120 115 110 105 100 95
More informationMax. lifting capacity: 100 t Max. lifting height: Max. working radius: 60 m
Telescopic Crawler Crane Max. lifting capacity: 100 t Max. lifting height: 83 m Max. working radius: 60 m Telescopic Crawler Crane Outstanding off-road capabilities and maneuverability 2 A long telescopic
More informationMax. lifting capacity: 60 t Max. lifting height: 55 m Max. working radius: 50 m
Telescopic Crawler Crane LTR 1060 Max. lifting capacity: 60 t Max. lifting height: 55 m Max. working radius: 50 m Telescopic Crawler Crane LTR 1060 Outstanding off road capabilities and manoeuvrability
More informationView thousands of Crane Specifications on FreeCraneSpecs.com. Liebherr crawler cranes up to 300 t capacity
Liebherr crawler cranes up to 300 t capacity Quality, durability and efficiency for many years Excellent performance and high mobility are the distinguishing features of the hydraulically driven crawler
More informationMobile crane LTM View thousands of Crane Specifications on FreeCraneSpecs.com
Mobile crane LTM 1060-3.1 Max. lifting capacity: 60 t Max. lifting height: 63 m Max. working radius: 48 m Mobile crane LTM 1060-3.1 Strong and flexible 2 LTM 1060-3.1 A long telescopic boom, high capacities,
More informationSheave head. Auxiliary winch. Leader. Leader support arm. Support arm brace. Leader swing device. Basic machine
Sheave head Rope crowd system (RDS) Auxiliary winch Tool with quick connection Lateral inclination device Leader Leader support arm Longitudinal inclination device Vertical travel device Support arm brace
More informationSheave head. Auxiliary winch. Leader. Leader support arm. Support arm brace. Leader swing device. Basic machine
Sheave head Rope crowd system (RDS) Auxiliary winch Tool with quick connection Lateral inclination device Leader Leader support arm Longitudinal inclination device Vertical travel device Support arm brace
More informationPRELIMINARY NEW! 186 kw. 40 t. Heavy Duty Cycle Crawler / Crane 41.1 m TIER IV
PRELIMINARY NEW! 1 kw 0 t Heavy Duty Cycle Crawler / Crane 1.1 m TIER IV Further developed. The E-Series. The characteristics of the E-Series 0 years of experience in the design and construction of duty
More informationHYDRAULIC CRAWLER CRANE
HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 250 t x 4.6 m Max. Crane oom Length: 76.2 m Max. Long oom Length: 9.4 m Max. Fixed Jib Combination: 76.2 + 30.5m Max. ower Jib Combination: 64. + 5.8 m CONFIGURAION
More informationPuyuan. QUY 50 Crawler Crane Technical Manual
Puyuan QUY 50 Crawler Crane Technical Manual 5591796 Pictures and technical parameters in sample books may not accord with the delivery goods because of the improvement in design. Please understand and
More informationALL TERRAIN CRANE AR-1600M
ALL TERRAIN CRANE AR AR-1600M JAPANESE SPECIFICATIONS CARRIER MODEL FAUN RTF160-5 SPEC. NO. AR-1600M-1-90101 The "fully automatic luffing jib" and the "luffing jib" are optional equipment. Refer to the
More informationPRELIMINARY 10 / kw / 168 kw. 120 t. Telescopic Crawler Crane. 40 m. TIER IVf
164 kw / 168 kw 120 t Telescopic Crawler Crane 40 m TIER IVf Technical data - equipment MACHINE TYPE Model (type) 6113 Automatic central lubrication for boom pivot winch drum bearing Pinion lubrication
More informationCrawler Crane LR 1400/2
Crawler Crane LR 0/2 Technical Data 53-20 44th Street Maspeth, Queens, NY 11378 (718) 784-1776 Table of contents Table of contents Technical description Crawler travel gear, Crane superstructure, Boom
More informationSpecifications & Lifting Capacities
SCX1500A-3 Stage III B / Tier 4 i HYDRAULIC CRAWLER CRANE Specifications & Lifting Capacities Hoist Rope 26mm 1401 05H.EA236 SCX1500A-3 VARIATION Variation of The Attachment Line Speed * Front / Rear Winch
More informationMobile Crane LTM Lifting capacity: 300 t. Telescopic boom length: 78 m. Hoist height: 114 m
Mobile Crane Lifting capacity: 300 t Telescopic boom length: 78 m Hoist height: 114 m mobile crane Ready for use quickly and flexibly 2 The sets standards in the 300-tonne class in terms of lifting capacity
More informationHYDRAULIC CRAWLER CRANE
SCX1500A-3 Stage IV / Tier 4 f HYDRAULIC CRAWLER CRANE Hoist Rope 26mm 1804 01T.EA312 SCX1500A-3 VARIATION Variation of The Attachment Line Speed * Front / Rear Winch (Rated with 12 t load) 110 (45) Third
More informationMobile crane LTM Max. lifting capacity: 50 t Max. lifting height: 54 m Max. working radius: 44 m
Mobile crane LTM 1050-3.1 Max. lifting capacity: 50 t Max. lifting height: 54 m Max. working radius: 44 m Mobile crane LTM 1050-3.1 Innovative and economical 2 LTM 1050-3.1 The Liebherr LTM 1050-3.1 mobile
More informationMobile crane LTM LICCON2. Max. lifting capacity: 220 t Max. lifting height: 101 m Max. working radius: 88 m
Mobile crane LTM 1220-5.2 Max. lifting capacity: 220 t Max. lifting height: 101 m Max. working radius: 88 m LICCON2 Mobile Crane LTM 1220-5.2 Strong and flexible 2 LTM 1220-5.2 A long telescopic boom,
More informationSPECIFICATION. CRANE Specification. CARRIER Specification
CRANE Specification Description Model KATO FULLY HYDRAULIC ALL TERRAIN CRANE KA-1300SL Maximum lifting capacity 130ton 2.5m Boom length 11.8m 52.0m (6 section) SL jib length 9.2m-26.6m ( section) Hoisting
More informationCrawler Crane. Complies with ANSI/ASME B 30.5 LR enus LR Courtesy of Crane.Market
Crawler Crane LR Complies wih ANSI/ASME B 0.5 enus LR 00.0 Couresy of Crane.Marke Dimensions Basic machine wih undercarriage R 8 0 7 9 0 9 0 6 0.5 59 8 8 7 5 6 7 5 7. 6 R 0 7. 6 Operaing weigh Remarks
More informationMobile Crane LTM Max. lifting capacity: Max. lifting height: Max. working radius: Courtesy of Crane.Market
Mobile Crane Max. lifting capacity: Max. lifting height: Max. working radius: 200 t 101 m 80 m N2 O C LIC Mobile Crane Flexible and economical to operate 2 A long telescopic boom, high capacities, an extraordinary
More informationHydraulic Crawler Crane
Hydraulic Crawler Crane Model : BME800G-2 Max. Lifting Capacity : 80 t x 3.6 m Max. Crane Boom Length : 54.9 m BME800G-2 CONTENTS 3 SPECIFICATIONS 5 6 7 8 9 10 11 12 13 14 17 GENERAL DIMENSIONS BOOM AND
More informationMobile Crane LTM Max. capacity: 100 t Max. hoisting height: 84 m Max. radius: 66 m
Mobile Crane LTM 1100-5.2 Max. capacity: 100 t Max. hoisting height: 84 m Max. radius: 66 m Mobile crane LTM 1100-5.2 Flexibly and economically usable 2 LTM 1100-5.2 A long telescopic boom, high capacities,
More informationMobile Crane LTM Max. capacity: 95 t Max. hoisting height: 82 m Max. radius: 60 m
Mobile Crane LTM 1095-5.1 Max. capacity: 95 t Max. hoisting height: 82 m Max. radius: 60 m Mobile crane LTM 1095-5.1 As taxi crane immediately ready for operation A long telescopic boom, high capacities,
More informationMobile crane LTM Max. lifting capacity: 130 t Max. lifting height: 91 m Max. working radius: 72 m
Mobile crane LTM 1130-5.1 Max. lifting capacity: 130 t Max. lifting height: 91 m Max. working radius: 72 m Mobile Crane LTM 1130-5.1 Flexible and economical to operate 2 LTM 1130-5.1 The Liebherr LTM 1130-5.1
More informationPRELIMINARY. 261 kw. Crawler crane. TIER IVf emission. standards
PRELIMINARY 261 kw t Crawler crane TIER IVf emission standards Advanced. The E-Series. What makes up the E-Series 60 years of experience in the design and construction of duty cycle cranes Uncompromisingly
More informationHYDRAULIC CRAWLER CRANE
HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 250 t x 4.6 m Max. Crane Boom Length: 76.2 m Max. Long Boom Length: 9.4 m Max. Fixed Jib Combination: 76.2 + 30.5m Max. ower Jib Combination: 64. + 5.8 m
More informationTelescopic Crawler Crane. Max. lifting capacity:220 t Max. lifting height:101 m Max. working radius: 88 m
Telescopic Crawler Crane LTR 1220 Max. lifting capacity:220 t Max. lifting height:101 m Max. working radius: 88 m Telescopic Crawler Crane LTR 1220 Outstanding off road capabilities and manoeuvrability
More informationMOBILE CRANE BRANCH OF ZOOMLION GROUP
QUY70 SPECIFICATIONS MOBILE CRANE BRANCH OF ZOOMLION GROUP -1 - Content 1. Overall dimensions and main specifications 1.1 Overall dimensions and working weight of main machine with basic boom 1.2 Overall
More informationMobile crane LTM Max. lifting capacity: 35 t Max. lifting height: Max. working radius: 40 m. Courtesy of Crane.Market
Mobile crane Max. lifting capacity: 35 t Max. lifting height: 44 m Max. working radius: 40 m Mobile crane Compact and economic 2 A long telescopic boom, high capacities, an extraordinary mobility as well
More informationTADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m
TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION MASS Overall length approx. 11,245 mm Overall width
More informationProduct advantages Mobile crane LTM 1160/2
Product advantages Mobile crane LTM 1160/2 Max. lifting capacity: 160 t at 3 m radius Max. height under hook: 96 m with swing-away jib Max. radius: 74 m with swing-away jib Performance profile of the LTM
More informationHydraulic Crawler Crane
Hydraulic Crawler Crane Model : BMS1000 Max. Lifting Capacity: 100 t x 3.8 m Max. Crane Boom Length: 62.6 m BMS1000 CONTENTS 3 SPECIFICATIONS 5 6 8 9 10 11 12 13 14 1 GENERAL DIMENSIONS BOOM AND JIB ARRANGEMENTS
More information