Advanced Foundation Technology and Equipment

Transcription

1 Advanced Foundation Technology and Equipment Tel Fax ncb1@dacos.it URL:

2 FOUNDATION EQUIPMENT Pile & Micro-Pile Hydraulic Rotary Rigs Casing Oscillators Casings and Casing Joints Hammer Grabs Drilling Tools Rotary Heads Hydraulic Crawler Drills Drill Rigs Truck Mounted Diaphragm Diaphragm Grabs Hydraulic Kelly Water-Stop Special Equipment Hydraulic Power Packs Desanders Wick Drain Stickers

3 HYDRAULIC CRAWLER DRILLS Our range of hydraulic crawler drills are designed for small to medium size drilling applications up to a maximum diameter of 600 mm. The drills are built on a robust base carrier and the best components available on the international market for outstanding performance and reliability. The drills are ready for a wide range of different applications such as micro-piles, anchor, ground consolidation, jet-grouting, geothermic energy etc. Due to different articulations our crawler drills permit an optimum drilling position for even the most demanding job site conditions and are suited to carry out following drilling works: with or without casings, roller bits, drag bits or core barrels, DTH hammers, top hammers (drifter), double rotary head, jet-grouting system, etc. Description FD 800 FD 1200 FD 1800 FD 2000 Diesel engine DEUTZ BF 4L 1011 DEUTZ BF6M 1013 C DEUTZ TCD 2013 L6 DEUTZ TCD 2013 L6 Power kw Rotary torque (T2) kgm Rotation (T2) r.p.m Rotary torque (T3) kgm Rotation (T3) r.p.m Mast length mm Rotary stroke mm Extraction force kg Crowd force kg Auxiliary winch kg Clamps diameter mm Ø252 Ø305 Ø350 Ø350 Track length mm Track width mm Total weight kg Optional Water Pump Water Pump Fassi Crane Auxiliary Winch We reserve the right to change technical specifications without prior notice. Water Pump Fassi Crane Rod Handling Water Pump Fassi Crane Rod Handling

4 HYDRAULIC CASING OSCILLATOR Hydraulic casing oscillators are used to drive and to extract large steel casings with diameters ranging from 800 to 2500 mm up to depths of 70 m. The required hydraulic power is supplied either by the excavating machine (hydraulic crawler crane or drilling rig) or by separate power pack. Oscillators for Crones type MGN (long version) Model/Maximum Diameter Minimum casing diameter mm Overall width mm Overall length mm Overall height mm Total weight without tilting device kg Lifting force kn Lifting stroke mm Clamping force kn Torque moment knm Braking force kn Maximum pressure bar Oscillators for Crones type MGB/MGC (short version) Model/Maximum Diameter Minimum casing diameter mm Overall width mm Overall length mm Overall height mm Total weight without tilting device kg Lifting force kn Lifting stroke mm Clamping force kn Torque moment knm Braking force kn Hydraulic power required kw Hydraulic power pack for all oscillator are also available We reserve the right to change technical specifications without prior notice.

5 CASING JOINTS (screw) Technical Data 600/40 700/40 800/40 900/ / / /50 External diameter mm Internal diameter mm Thickness mm Single wall thickness mm Double wall thickness mm Height mm Screw n Threaded or conical bushes n Centering keys n Weight casing joint kg Weight of casing single wall kg/m Weight of casing double wall kg/m Technical Datas 1500/ / / / / / /75 External diameter mm Internal diameter mm Thickness mm Single wall thickness mm Double wall thickness mm Height mm Screw n Threaded or conical bushes n Centering keys n Weight casing joint kg Weight of casing single wall kg/m Weight of casing double wall kg/m

6 HAMMER GRAB FOR PILES Applications: Our line of small to medium size hammer grabs is designed and manufactured to excavate circular piles from 1000 to 2000 mm diameter in a heavy wide range of soil conditions (sand, gravel, clay, sandstone and granite) with a cohesive value up to kg/m 2 supported and operated by a single line or double line. BS Series For small to medium size piles, pull ratio 6:1, class 2 terrains Nominal jaw diameter mm Feasible pile diameter mm Height with closed jaws mm Height with open jaws mm Rope diameter mm Swivel capacity ton Grab weight kg Weight of catching head kg BSN-5 Series For medium size piles, pull ratio 5:1, class 3 terrains, smooth jaws Nominal jaw diameter mm Feasible pile diameter mm Height with closed jaws mm Height with open jaws mm Rope diameter mm Swivel capacity ton Grab weight kg Weight of catching head kg Class 1 terrains: kg/m 2. Class 2 terrains: kg/m 2. Class 3 terrains: kg/m 2 cohesive value. We reserve the right to change technical specifications without prior notice.

7 HAMMER GRAB FOR PILES (large) Applications: Our line of large hammer grabs is designed and manufactured to excavate circular piles from 1500 to 3000 mm diameter in a very wide range of soil conditions (sand, gravel, clay, sandstone and granite) with a cohesive value up to kg/m 2 supported and operated by a single line crawler crane. BST-7 Series For large size piles, pull ratio 5:1, class 2-3 terrains, Bofors or Esco teeth Nominal jaw diameter mm Feasible pile diameter mm Height with closed jaws mm Height with open jaws mm Rope diameter mm Swivel capacity ton Grab weight kg Weight of catching head kg BSA- 5 Series, class 1 terrains 7 Series, class 2-31 terrains Nominal jaw diameter mm Feasible pile diameter mm Height with closed jaws mm Height with open jaws mm Rope diameter mm Swivel capacity ton Grab weight kg Weight of catching head kg Class 1 terrains: kg/m 2. Class 2 terrains: kg/m 2. Class 3 terrains: kg/m 2 cohesive value. We reserve the right to change technical specifications without prior notice.

8 DRILLING TOOLS Our line of drilling tools includes: Centrifugal bucket, clay bucket, clay double bottom bucket, cleaning bucket, rock bucket, rock double bottom bucket, clay auger, rock auger core barrel, continuous flight auger, hollow stem auger, soil displacement augers, casings, casing joints, cutting teeth, round shank carbide picks, etc HEART AUGER TRE Excavation diameter mm Flight pitch mm Overall height mm Number of teeth Weight kg Augers manufactured to customer specifications. ROCK AUGER TR-1 Excavation diameter mm Flight pitch mm Overall height mm Number of teeth Weight kg Augers manufactured to customer specifications. CORE BARREL KR-3 Excavation diameter mm Overall height mm Number of bits Weight kg Augers manufactured to customer specifications. We reserve the right to change technical specifications without prior notice.

9 DRILLING TOOLS Our line of drilling tools includes: Centrifugal bucket, clay bucket, clay double bottom bucket, cleaning bucket, rock bucket, rock double bottom bucket, clay auger, rock auger core barrel, continuous flight auger, hollow stem auger, soil displacement augers, casings, casing joints, cutting teeth, round shank carbide picks, etc HEART BUCKET BR-E Diameter mm Overall height mm Number of teeth Weight kg Bucket manufactured to customer specifications. ROCK BUCKET BR1 Diameter mm Overall height mm Number of bits Weight kg Bucket manufactured to customer specifications. We reserve the right to change technical specifications without prior notice.

10 ROTARY HEADS Main applications: The hydraulic rotary heads are designed and built for heavy duty drilling work with continuous flight augers, DTH, rock bits, with hollow stem flight augers and with soil displacement augers. Main advantage: Wide range of torque from 400 to kgm Can be mounted to any leader of suitable strength Available for a wide range of drilling works Very robust and extremely reliable Variable speed and torque Micro - Piles Version Technical Datas T1 400 T T T T Torque Kgm Rotation Speed r.p.m Piles Version Technical Datas T T T T T T Torque Kgm Rotation Speed r.p.m Spin-Off Speed r.p.m We reserve the right to change technical specifications without prior notice.

11 HYDRAULIC ROTARY RIGS Our range of Rotary Rig are suitable for a lot type of job. Torque between 10 and 20 tons with some special Rigs equipped with a rotary head of 6 and 25 tons torque. Each machine can be equipped with CFA kit. Type FD 100 FD 120 FD 180 FD 200 FD 250 UNDERCARRIAGE Overall Length mm Track Shoe Width mm Overall Width (Extended) mm Overall Width (Retracted) mm Ground Pressure Mpa BASE MACHINE Type E 215 E 215 E 385 E 485 E 485 Diesel Engine CNH CNH ISUZU ISUZU ISUZU FABE8604B FABE8604B 6HKXABEB AA-6SD1XQY AA-6SD1XQY Installed Power Kw 2150 rpm 2150 rpm 2100 rpm 1950 rpm 250 a@1950 rpm HYDRAULIC PUMPS Main Pump l/min 2 X X X X X 370 Auxiliary Pumps l/min Working Pressure bar ROTARY TABLE Maximum Torque knm Max Drilling Speed r.p.m Spin-Off Speed r.p.m Pull-Down Pull/Push kn 135 / / / / /320 Pull-Down Stroke mm MAIN WINCH 1 st Layer Nominal Pull kn st Layer Nominal Speed m/min Rope Diameter mm AUXILIARY WINCH 1 st Layer Nominal Pull kn st Layer Nominal Speed m/min Rope Diameter mm PILE DIAMETER Max Pile Diameter mm Max Pile Depth m C.F.A. Max Pile Depth m Max Pile Depth (cleaner) m Max Pile Diameter mm Extraction Force kn WEIGHT & DIMENSIONS Transport Width mm Transport Height mm Transport Length mm Operating Weight ton

12 HYDRAULIC ROTARY RIGS PICTURES Follow some pictures of previous Rigs FD 100

13 HYDRAULIC ROTARY RIGS PICTURES Follow some pictures of previous Rigs FD 120

14 HYDRAULIC ROTARY RIGS PICTURES FD 180

15 HYDRAULIC ROTARY RIGS PICTURES FD 200

16 HYDRAULIC ROTARY RIGS PICTURES FD 250

17 DRILL RIGS TRUCK MOUNTED Base Machine: IVECO AD190; Hydraulic Power Pack (Truck Mounted): Engine Type CUMMINS QSB 5.9; Power r.p.m.; Hydraulic System Pumps (Brevini) 1 X X X X20 l/min; Hydraulic Oil Tank 500 l; Diesel Tank 300 l; Water Pump UDOR 200 (200 l/min); Drilling System: Mast Length 7000 mm; Rotary Heads Stroke 4300 mm; Pull Down (Cylinder) Push/Pull 14000/20000 kg; Clamps Blocking Ø max 360 mm; Clamping Force kg; Break-Out Ø max 360 mm; Clamping Force kg; Break-Out Force kg; Rotary Head T2 Maximum Torque 2045 danm; Maximum Speed 113 r.p.m.; Rotary Head T3 Maximum Torque 2045 danm; Maximum Speed 113 r.p.m.; Winches Main Maximum Pull 4300 kg; Auxiliary Maximum Pull 500 kg; Additional Installed Components: Preventer for drilling material exhaust, Mechanical-Hydraulic System fit for rods installation, Air-Water Swivel Weight (Truck + Drill) kg

18 HYDRAULIC DIAPHRAGM WALL GRAB Cable suspended grab 180 rotation device. The operator check trough the screen, the position of the grab inside the wall and can adjust the verticality by means of the electronic device. DIAPHRAGM SYSTEM HGV Minimum jaw width mm 600 Maximum jaw width mm 1500 Minimum jaw opening mm 2500 Maximum jaw opening mm 3500 Minimum width of guides mm 2430 Height with open jaws* mm 7300 * Value refered to rectangular section jaws of opening 3200mm Height with closed jaws* mm 8170 Rotation of grab 180 Verticality adjustment x,z Verticality adjustment angle ± 2 Maximum pressure bar 320 Hydraulic power pack Kw 132 HYDRAULIC GRAB HGV 3200/ HGV 3200/ Jaw width mm Jaw opening mm Grab weight kg Maximum closing force kn Jaw opening/closing time Sec. 10/8 10/8 10/8 10/8 10/8 10/8 10/8 10/8 Excavation sets of intermediate dimensions to the above can be supplied on request. We reserve the right to change technical specifications without prior notice.

19 MECHANICAL DIAPHRAGM WALL GRAB HG type NCB Rope Mechanical Diaphragm Wall Grab Range, is been designed and manufactured for Diaphragm Wall Excavation in all soil conditions and can be equipped with a wild range of excavation set without grab body replacement. MAIN FEATURES HG Installable Excavation Set Rect/Semic Rect/Semic Rect/Semic Minimum Jaws Width mm Maximum Jaws Width mm Minimum Jaws Opening mm Maximum Jaws Opening mm Main Rope Diameter mm Auxiliary Rope Diameter mm Jaws Closing Force ton ~50 ~50 ~50 Weight kg

20 MECHANICAL DIAPHRAGM WALL GRABS Our grabs are designed for rectangular or semicircular excavation of diaphragm or slurry walls. Grabs and guides are interchangeable on the same body for maximum flexibility. BF-9 Series Minimum crane capacity 40 tons, 2 winch, pull ratio 5:1, stabilizer available Jaw width mm Minimum jaw opening mm Maximum jaw opening mm Minimum width of guides mm Maximum width of guides mm Rope diameter mm Overall height with open jaws mm Overall height with closed jaws mm Jaw capacity l Maximum closing force tons Weight kg BF-12 Series Minimum crane capacity 50 tons, 2 winch, pull ratio 5:1 Jaw width mm Minimum jaw opening mm Maximum jaw opening mm Minimum width of guides mm Maximum width of guides mm Rope diameter mm Overall height with open jaws mm Overall height with closed jaws mm Jaw capacity l Maximum closing force tons Weight kg We reserve the right to change technical specifications without prior notice.

21 MECHANICAL DIAPHRAGM WALL GRABS Our grabs are designed for rectangular or semicircular excavation of diaphragm or slurry walls. Grabs and guides are interchangeable on the same body for maximum flexibility. BF-5 Series Minimum crane capacity 22 tons, 2 winch, pull ratio 4:1 Jaw width mm Minimum jaw opening mm Maximum jaw opening mm Minimum width of guides mm Maximum width of guides mm Rope diameter mm Overall height with open jaws mm Overall height with closed jaws mm Jaw capacity l Maximum closing force tons Weight kg BF-6/L Series Minimum crane capacity 30 tons, 2 winch, pull ratio 5:1 Jaw width mm Minimum jaw opening mm Maximum jaw opening mm Minimum width of guides mm Maximum width of guides mm Rope diameter mm Overall height with open jaws mm Overall height with closed jaws mm Jaw capacity l Maximum closing force tons Weight kg We reserve the right to change technical specifications without prior notice.

22 HYDRAULIC KELLY Full guidance during excavation; Reels with an automatic device for the tensioning and recovery of the hydraulic flexible hoses; High closing force; Excavation sets of different dimensions and variable section; rectangular or semicircular are interchangeable on the same grab body; Hydraulic rotation of the grab by ±45 ; Mast mounted HGR Kelly can be powered by the hydraulic plant of the drilling rig; Crane mounted CHP 100K hydraulic power pack meant to actuate the HGG Kelly; Possibility to hydraulically correct the verticality of the telescopic shaft assembly independently of the position of the base machine. DIAPHRAGM SYSTEM HGR Minimum jaw width mm 400 Maximum jaw width mm 1200 Minimum jaw opening mm 2000 Maximum jaw opening mm 3000 Height with open jaws* mm 2620 Height with closed jaws* mm 3280 Rope diameter (2 nd line pull) mm 26 Maximum pressure bar 320 Maximum lifting/lowering speed m/min 35 HYDRAULIC GRAB HG 2500/ Jaw width mm Jaw opening mm Grab weight kg Maximum closing force kn Excavation sets of intermediate dimensions to the above can be supplied on request. We reserve the right to change technical specifications without prior notice.

23 WATER STOP Our range of water-stop can be supply in various width and length and divided by foot element, intermediate element, male element and lifting-up element. WIDTH (mm) A (mm) B (mm) C (mm) D (mm) E (mm) L (mm)

24 HYDRAULIC POWER PACKS Technical Datas CHP K 150HD HD 250 Type of circuit Open Open Open Open Open Open Open Maximum Power kw Maximum Speed r.p.m Speed setting r.p.m Fuel tank capacity l Nominal delivery l/min 2X116 2X168 1X294 2X225 2X257 2X257 2X360 Maximum pressure bar Hydraulic oil tank capacity l Width mm Length mm Height mm Weight kg Applications MGN 1000 MGN 1200 MGN 1500 The data may depending on the components installed. We reserve the right to change technical specifications without prior notice. HGV MGN 1500 HD MGN 1800 MGN 2000 MGN 2000 HD MGN 2200 MGN 2500 MGN 2500 HD MGN 3000

25 DESANDERS MODEL type NCB 60 E NCB 120 D NCB 120 E Efficiency m3 /h Installed Power KW Motor KW 11 Electric 66.5 Diesel 18.5 Electric Pump type PEMO A/O 603 WARMAN 4/3 C-AH PEMO K 125 WARMAN 4/3 C-AH PEMO K 125 Vibrators type OLI OLI OLI Centrifuge Separator mm Ø280 Ø390 Ø390 Main Screen mm 550 X 1600 OTP 4 X X 1600 OTP 4 X X 1600 OTP 4 X 20 Vertical Dryer Screen mm 550 X X X 300 OTP 1 OTP 1 Horizontal Dryer Screen mm 550 X X 1200 OTP 0.7 OTP 0.7 DIMENSIONS Height mm Width mm Total Length mm Weight Kg OTP X 1200 OTP 0.7

26 VERTICAL DRAIN EQUIPMENT Self-erecting, excavator mounted, hydraulic PVD installation equipment. Insertion and extraction of the robust mandrill (manufactured in high tensile steel) is effected by means of a hydraulic winches which acts on a 2 nd line pull sheave transmission. Mast D-18 D-22 D-26 Maximum Length (1) mm Maximum drain installation depth mm Weight kg Hydraulic winches line pull t Sheave transmission Rope diameter mm Performance Data Driving force (250 bar) kg Extraction force (250 bar) kg Hydraulic excavator (2) Power kw Delivery l/min Pressure bar Operating weight kg (1) Including telescopic foot module; (2) Recommended features;

27 Tel Fax ncb1@dacos.it URL: