Commercial Vehicle Tires Technical Data Book

Transcription

1 Technical ata Book

2 Technical ata Book 2 3 Our concept for your lowest overall driving costs Contents General hints We know that cost efficiency is the key. And this is precisely why Continental Truck s pay in the long-term, as their performance benefits extend beyond a tire s normal lifespan to be repeated again and again, thanks to the ContiLifeCycle. The durability of Continental Truck s begins with the new tire and is considerably extended by options including professional regrooving, intelligent casing management (ContiCasingManagement) and our premium retread. The mutually harmonized components of the ContiLifeCycle make a considerable contribution to the reduction of tire costs and thus achieving the lowest overall driving costs. New tires General hints afety remarks... 4 Operating instructions (IN 7804/7805 and ECE-R 54)... 5 designations... 6 Units of measurement and definitions (IN 70020)... 9 idewall designations Load capacities for various maximum design speeds Air pressure multiplier for increased load capacity due to maximum design speed Load capacities of tires in special cases (IN 7804/7805) Truck chassis with crane superstructure (mobile crane) Bus tire fitment Wheels and rims Retreading Casing management ContiLifeCycle Customer egments Goods People Construction Tread pattern overview Goods People Construction M + and Three Peak Mountain now Flake (3PMF) esignation pecifications and load capacities Regrooving recommendations ", 16", 20", 24" pecifications and load capacities Regrooving recommendations Maintenance and care ", 16", 20", 24" New Continental tires Casing management Retreading They are long-lasting, fuel-saving, retreadable and regroovable, and a key cornerstone for the lowest overall driving costs. ContiCasingManagement ensures best casing asset management through professional tools such as ContiCasingBank. The cost-effective, eco-friendly and premium quality solution to prolong the life of your Continental tires. Maintenance and care

3 Technical ata Book General hints 4 5 afety remarks Operating instructions (IN 7804/7805 and ECE-R 54) General hints The extensive technical data and other information The data provided in this guide is based on ave- Load capacity and speed Free Rolling s (FRT) relating to tires and accessories on the following rage operating conditions as normally found in When determining the minimum tire size necessary Trailer tires marked as Free Rolling s (FRT) pages have been compiled to reflect as accurately central Europe. for the axle of a vehicle, the authorized weight and are tires specifically designed for the equipment and completely as possible the current state of development. If this Technical ata Book is to be used as a basis for particularly important decisions, further data covering relevant standards such as ETRTO 1 ), IN 2 ) and WdK 3 ) can also be used. pecial information can, of course, also be obtained from us at the following address: Continental Reifen eutschland GmbH P.O. Box Hannover Germany This service brochure is for information purposes only. All liability is excluded, whether for damage or for other legal reasons (see also page 2). All designs are in compliance with OT 4 ) regulations and are marked accordingly. ince 1982 all tires have been standardized in accordance with ECE 5 ) directive 54 and thus also in accordance with the current EU 6 ) tire directives. Please contact us with respect to operating conditions differing from the above, e.g. for uses outside Central Europe. The tire sizes given in this guide are not always identical to the ones available in the size range. Lower inflation pressure, greater loads or higher speeds than those recommended by the vehicle or tire manufacturer shorten the service life of the tire. These instructions must be followed if vehicle safety and that of those fitting tires is to be guaranteed. This applies above all to instructions regarding tire pressure. Failure to comply with these instructions could result in tire damage that may even lead to tire blow-outs under certain circumstances. This, in turn, could cause traffic accidents involving damage to property and/or personal injury (see also page 5). the maximum design speed of the vehicle should always be used as a basis. Trailers first coming into service on or after January 1, 1990 must be equipped with tires suited for maximum speeds of at least 100 km/h, unless the trailer is clearly marked for a lower speed. The so-called tolerance catalogue must also be taken into consideration here. Nominal load capacity = 100% load, as the load index also indicates *. Reference speed This is the speed assigned as per nominal load capacity of the tire. The load capacity can be exceeded when the vehicle, due to its construction, has a lower maximum speed and vice versa (see the tables on page 12 and 13). Inflation pressure The inflation pressures indicated in the tables are minimum values given for reference purposes. All inflation pressures apply to the cold tire, i.e. the state in which the tire is in after having stood outdoors for several hours, not exposed to intense sunlight. of trailers (non driven/ trailing axles). This is the axle position where they will deliver their best performance. Mixed fitment (radial/crossply) While it is permissible for a vehicle weighing more than 2.8 t to be fitted axlewise with tires of different construction, it is recommended that tires of the same type be fitted in all wheel positions. Rims Only the specified rims may be mounted on new commercial vehicles series. Tapered bead seat rims with a diameter of 16" or less should be equipped with safety shoulders (e.g. round hump) if tubeless radial tires are fitted on them. The rim sizes printed in bold type in the table on page 34 are optimal Continental sizes with respect to service life, wear pattern and durability. Wheels The load capacity must be adequate in all cases. M + tires May be fitted on commercial vehicles whose construction allows for a higher maximum speed than approved for the tire if the tire s lower approved speed is clearly posted in the vehicle in the driver s field of vision (e.g. sticker on the instrument panel). 1) ETRTO - The European and Rim Technical Organisation, Brussels 2) IN - eutsches Institut für Normung, Berlin (German Institute for tandardization) 3) WdK - Wirtschaftsverband der deutschen Kautschuk-Industrie, Frankfurt/Main 4) OT - epartment of Transportation 5) ECE - Economic Commission for Europe (UN institution in Geneva) 6) EU - European Union, previously EEC * ee table on page 6

4 Technical ata Book General hints 6 7 designations Load indices (LI) designations General hints LI kg LI kg LI kg LI kg LI kg LI kg In the past the tire load capacity category was indicated solely by a PR number. Now a numerical code the load index (LI) is used to exactly indicate the tire s load carrying capacity. ee also page 6 and 8. A speed symbol (I) is used to designate the speed rating of the tire, as shown in the re presentation below. The use of the LI and I was prompted by the introduction of ECE * regulation no. 54 and the EU tire directive for Europe (in force as of January 1, 1993), according to which pneumatic tires intended for road use at speeds in excess of 80 km/h must carry an operational designation comprising LI (single/dual) and I. Alongside the nominal opera tional designation a tire may also bear an additional operational designation, e.g. with a lower LI and an I for higher speeds. These speci fications have to be included. Example: 315/70 R /148 L 154 K 150 An uncoded maximum load-capacity and tirepressure data in Ibs (1 Ibs = kg) and psi (pounds per square inch - 1 bar = 14.5 psi) may also be moulded into the tire. These specifications form part of the desig nation according to U afety Regulation FMV 119 **, which covers all new pneumatic tires for light trucks, trucks, buses and trailers intended for use on public highways as well as motorcycle tires. Canada and Israel also use this specification. ate of manufacture The last 4 digits of the OT I no. indicate the week and year of manufacture e. g. OT XXXX XXXX 0205 peed symbols (I) J K G } } 2nd week M N L P (130)(140) 93 (120) (150) 68 (110) (160) 99 mph 62 (100) (170) (km/h) 106 F (90) (180) (80) (190) T Q R * ECE = ECONOMIC COMMIION FOR EUROPE, UN institution in Geneva ** FMV = Federal Motor Vehicle afety tandard

5 Technical ata Book General hints 8 9 designations Units of measurement and definitions (IN 70020) General hints A r A = Outer diameter of the tire r = static radius f = deflection under load Vehicle tire group f Example of designation size 1 ) ervice description 2 ) width 1) R = radial design C = light truck (van) tire with LI for single tires = 121 and below, see also page 5 2) ervice description = load index for single/dual tires plus speed symbol (see also tables on following pages) 3) upplementary service description W Example comprises details of Light truck 185 R 14 C 102/100 N 185 mm ~ /75 R 16 C 107/105 N 195 mm Truck 12 R /148 L 300 mm ~ H:W % Rim dia code d 315/80 R /150 L (154/150 M) 3 ) 315 mm R /150 K 300 mm Trailer 365/80 R / K 365 mm /65 R / K 385 mm Bus 275/70 R /145 J 275 mm M M = ual-tire spacing W tire width rim width W and new when using the measuring rim 295/80 R /148 M 295 mm H Rim d tire new A As a matter of principle, the technical data in the tables always complies with the international standards as specified by IO and the ETRTO. Further details such as other tire sizes or designs, plus the static radius and the rolling circum ference comply with IN/WdK Guidelines. Lengths are given in millimetres. Rim width The linear distance between the flanges of the rim. Cross-section Half the difference between the overall diameter and the nominal rim diameter. width The section width of an inflated tire mounted on its theoretical rim and indicated in the tire size designation. Outer diameter The diameter of an inflated tire at the outermost surface of the tread. Nominal rim diameter It is a size code figure for reference purposes only, as indicated in the tire and rim size designation. Inflation pressure inflation pressure is given in bar based on cold tires. Outer diameter New * is a nominal size which refers to the tread center. Max. outer diameter in service is the maximum diameter permitted in the tread center as a result of permanent growth during tire use. ynamic deformations are not included. Cross-section width New * is a nominal size which refers to the smooth tire wall. * Construction size Max. operational width is the maximum permitted width. This includes scuff ribs, decorative ribs, lettering and permanent growth during use. ynamic deformations are not included. tatic radius is the distance from the tire center to the ground level. Measurements are checked on fitted-tires inflated to the inflation pressure spe cified in IN Part 5. Rolling circumference is the distance covered by each revolution of the tire. Load capacities are given in kgs (weight in the sense of mass) ual-tire spacing Maintaining the minimum spacing distance ensures that the two tires in a dual fitment arrangement function without any infringement of the ETRTO standards providing the tires are not fitted with chains. In the course of development, a variety of desig nations for tire dimensions have been introduced, some of which are used concurrently. The following combination is most frequently used: tire width in mm, then H : W (height : width) in % and finally the codes for the tire construction for example R for radial and - for crossply and the nominal rim diameter as code. When planning vehicle wheel space, automotive designers must proceed on the basis of the maximum values for tire width and outer diameter, taking into account the tire s static and dynamic deformation. In this way they ensure that all standardly approved tires will fit in all cases. If this is not possible in exceptional cases, appropriate measures are to be taken to exclude any possible risk to safety.

6 Technical ata Book General hints idewall designations The tire designation markings satisfy both the U standard (FMV 119) and the European standard (ECE-R 54). General hints 3 1 designation 315 = tire width in mm 80 = aspect ratio (section height to section width) = 80% R = radial construction 22.5 = rim diameter (code) 8 U load designation For single/dual fitment and indication of max. inflation pressure in psi (1 bar = 14.5 psi) 8a Load range In accordance with U standard 2 ervice description 9 ata as per U safety standard on inner Consisting of construction or number of plies, in this case = load index for single fitment 150 = load index for dual fitment Tread: under the tread there are five steel cord plies (including casing) L = code letter for speed rating idewall: viewed from the side there is one 2 3 TWI steel cord ply (in this case the casing ply) 10 Tread Wear Indicator 10 OT = U.. epartment of Transportation 4 Recommended use (responsible for tire safety standards) 11 only Continental Truck s 11 M + 5 Regroovable esignation for winter use suitability The manufacturer has designed (Mud & now) a 8 9 the tire for regrooving 6 Tubeless Tube Type 12 Rotation (not valid for shown Conti Hybrid H3) Recommended direction of rotation 7 E = tires complies with value set 13 ingle Point out in ECE-R 54 (not valid for shown Conti Hybrid H3) 4 = country code for the country Alternative load and speed in which the approval number was issued (here: 4 = Netherlands) Explanation OT = epartment of Transportation ETRTO = The European and Rim Technical Organisation, Brussels ECE = Economic Commission for Europe (UN Institution in Geneva) FMV = Federal Motor Vehicle afety tandard

7 Technical ata Book General hints Load capacities for various maximum design speeds Load capacities for various maximum design speeds General hints Maximum speed in km/h (determined by vehicle design) C-tires with load index 121 (1450 kg) or less as single fitments Approved load capacity in % of the nominal load capacity 2 ) equals the load index for reference speed L (120) M (130) N (140) P (150) Q T ( ) see see see see 85 column column column column 80 N N 110 N N ) ) ) ) ) ) 160 Application restricted speed 10 1 ) ) 190 tationary 1 ) 210 Maximum speed in km/h (determined by vehicle design) s with load index 122 (1500 kg) or more as single fitments Approved load capacity in % of the nominal load capacity 2 ) equals the load index for reference speed (65) F (80) G (90) J (100) K (110) L (120) M (130) ) ) see see see see see ) 116 column column column column column ) M M M M M ) ) Application restricted speed 10 1 ) 3 ) ) 3 ) tationary 1 ) 3 ) ) ual-tires = 2 x single load capacity 2) A sign indicating the max speed must be attached to trailers restricted to speeds below 100 km/h (62 mph). 3) Ask the tire manufacturer about these applications. s with I ratings P and Q under full load at speeds of over 140 km/h should be inflated an extra 0.1 bar for every excess 10 km/h. No excess loads are applicable over 65 km/h for tires on heavy trailers (with laden weight > 3.5 t). The load/speed variation given on this page do not apply to the additional service description (the so called ingle Point). ee general notes on page 5. This table is only applicable in conjunction with air pressure multiplier on page 14. If applied please check dual spacing (dual tire contact) and rim status.

8 Technical ata Book General hints Air pressure multiplier for increased load capacity due to maximum design speed Load capacities of tires in special cases (IN 7804/7805) General hints Maximum speed in km/h (determined by vehicle type) Air pressure multiplier for reference speed (speed index) of tire G, J, K, L, M 90 km/h km/h N, P, Q, R, 140 km/h km/h Case Type of service Approved load capacity as % of the nominal load capacity in the tables pecial-service vehicles: Fire brigade vehicles with special superstructures, road flushers, road sweepers, garbage trucks, cherry-pickers, municipal service vehicles of a similar nature and other public utility vehicles. 2 vehicles: With special superstructures (concrete mixers, aircraft refuellers) used in local service with maximum service speeds not in excess of 60 km/h. 3 Regular-service buses (M 3-Class II): In urban service, with maximum service-related speeds of up to 60 km/h. 4 Regular-service buses (M 3-Class I): (see also IN 7805) In urban and suburban service, if average speed does not exceed 40 km/h. 5 s on the front axle of trucks with facilities for snow removal (frontend snow plough/rotary snow plough and the like) at service-related speeds of 50 km/h 62 km/h 6 For internal use on aircraft refuellers at speeds of up to 30 km/h (inflation pressure + 15%, no reduction for dual fitment). 7 Caravans and other passenger-car trailers (only for C tires, see also WdK directive 195) for speeds of up to 100 km/h. Please note: This chart is not applicable in conjunction with the charts on pages 12 or 13 in correspondence with the chart on page The multipliers cited are to be used for an operating pressure of up to 10 bar. Example: In the case of a K-rated tire (110 km/h) and nominal inflated pressure of 7.5 bar, the inflation pressure can be increased to 8.85 bar if the vehicle s maximum design speed is set at 40 km/h (1.1 x 7.5 bar) to exploit an increased load capacity of 115% of nominal load capacity.

9 Technical ata Book General hints Truck chassis with crane superstructure (mobile crane) Bus tire fitment Recommended inflation pressures for tires on town and country buses for various axle loads General hints size PR ingle/ dual fitment Load capacity (kg) per axle and speed (km/h) pressure 2 ) size Operating code Load index ingle/ dual fitment Max. permitted axle weight (kg) for inflation pressure (bar) (psi) including +10% extra as per German Transport Association (IN 7805) +15% extra as per German Transport Association (IN 7805) tationary 1 ) bar (psi) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) R R R R R R (131) 10.0 (145) 10.0 (145) R / /55 R / /70 R / /70 R / R (116) 295/80 R / R (145) 11 R / ) When boom is swung out in unfavourable position 2) For inflation pressure of 8.0 bar (116 psi) and over use valve slit cover plate

10 Technical ata Book General hints Wheels and rims Offset The offset is the distance from the center of the Rim center Rim center General hints wheel to the inside surface of the wheel disk on the hub. The wheel insertion depth can be posi- 1 tive, negative or zero. 2 3 The insertion depth not only ensures adequate space for the brake drums, it also determines drive characteristics, tracking width, steering swivel, pin offset and wheel bearing guidance. In the case of dual tire fitment, the insertion depth also influences the distance between centers. positive (Inset) negative (Outset) There are three main types of rim for commercial vehicle tires: 4 One-piece well base rims for tubeless tires tandard and low-profile tandard and low-profile light trucks 14"-17" 6 5 Multi-part flat base rims for tubeless tires Multi-part flat base rims for tires with inner tubes dual spacing 6 center hole diameter 2 tire clearence 7 tire center line 3 vehicle clearence 8 outset 80-series tires 20" High profile ratio mainly 20" 4 tire section width 9 backspace 5 bolt circle diameter Please contact rim manufacturers for detailed information regarding available rim sizes and variants.

11 Technical ata Book Customer egment Goods Customer egment People Motorway Regional On/Off Coach Intercity Urban Conti EcoPlus Conti Coach Conti Hybrid Conti CityPlus HC / HC / HTC Conti Urban Conti candinavia HW CANINAVIA / HW CANINAVIA / HTW CANINAVIA HW 2 COACH Conti Urbancandinavia Conti Urban M+ Customer egment Construction Regional On/Off Off Conti Hybrid HC / LC / HC / HTC HO / HC / LC / T9 / HO

12 Technical ata Book Tread pattern overview Goods teer rive Trailer Conti EcoPlus H3 Conti EcoPlus H3 50 / 55 series Conti EcoPlus H3 also as * Conti EcoPlus HT3 also as Motorway HL 2+ ECO-PLU H HYBRI only as HTL 2 ECO-PLU 17.5 HTL 1 ECO-PLU 19.5 only as Motorway Conti Hybrid H3 Conti Hybrid H3 65 serie Conti Hybrid H Conti Hybrid H also as * Conti Hybrid H also as * Conti Hybrid HT also as * Conti Hybrid HT3 445/45 R /50 R 19.5 Conti Hybrid HT HR HR H HYBRI only as HR 2 only as HTR 2 HTR Regional HR 9 R, 10 R, 13 R 22.5 HR 11 R, 12 R 22.5 HR 20 / 22 / 24 HR 22.5 HR 20 Regional * in preparation

13 Technical ata Book Tread pattern overview Goods teer rive Trailer Conti Hybrid L Conti Hybrid L Regional LR 1+ LR 1 LR R 17.5, 10 R 17.5 LR 1+ LR Regional HC 1 HC 1 11 R, 12 R, 13 R 22.5 HC 20 HC 1 also as HC 20 HTC 1 HTC 22.5 On/Off HC 55 / 65 series On/Off Urban Cityervice HA3 Cityervice H3 Urban Conti candinavia H Conti candinavia L Conti candinavia H Conti candinavia L Conti candinavia HT Conti candinavia HT Winter HW 2 CANINAVIA HW 2 CANINAVIA 55 / 65 series HW 2 CANINAVIA also as HW HTW 2 CANINAVIA HTW 2 CANINAVIA 19.5 Winter

14 Technical ata Book Tread pattern overview People All axles rive Coach Conti Coach HA3 Coach Intercity Conti CityPlus HA3 Intercity Conti Urban HA3 Conti Urban HA3 M+ also as Conti Urban HA3 M Urban HU HU 1 M+ only as HU 1 55 series Urban Conti Urban candinavia HA3 Conti Urban candinavia H3 also as Winter HW 2 COACH also as Winter

15 Technical ata Book Tread pattern overview Construction teer rive Trailer Conti Hybrid H3 Conti Hybrid H Conti Hybrid HT Conti Hybrid HT HR HR HR 2 only as HTR 2 Regional HR 9 R, 10 R, 13 R 22.5 HR 11 R, 12 R 22.5 HR 20 / 22 / 24 HR 20 Regional HC 1 HC 1 11 R, 12 R, 13 R 22.5 HC 20 HC 1 also as HC HTC 1 HTC 22.5 On/Off LC HC 55 / 65 series On/Off T9 T9+ HO AN HC HO Off HO LC Off

16 Technical ata Book M + and Three Peak Mountain now Flake (3PMF) esignation teer size M+ T Tread Pattern 355/50 R HW 2 CAN 385/55 R Conti Hybrid H3 1 1 HW 2 CAN 315/60 R HW 2 CAN size M+ T Tread Pattern 7.50 R 16 1 HO + AN 365/85 R 20 1 HC 395/85 R 20 1 HC R 20 1 HC 1 Conti Urban HA3 M+ 385/65 R Conti Hybrid H3 1 1 HW 2 CAN 1 HO AN R 20 1 HO AN 1 HC 1 HC 1 275/70 R Conti Hybrid H3 1 Conti Urban HA3 M+ 325/95 R 24 (12.00 R 24) 1 HC 1 1 HC All Continental drive axle tires carry the M + designation. In addition, some special steering axle and trailer tires are marked M +. The best performance on mud, snow and ice is provided by tires showing the Three Peak Mountain nowflake (3PMF) symbol. All tires suitable for winter and marked M + and/or 3PMF are listed below. teer size M+ T Tread Pattern 245/70 R Conti Hybrid L3 265/70 R Conti Hybrid L3 1 LC 205/75 R Conti Hybrid L3 215/75 R Conti Hybrid L3 1 1 Conti candinavia L3 225/75 R Conti Hybrid L3 235/75 R Conti Hybrid L3 1 1 Conti candinavia L3 9.5 R LC now tire means a tire [ ] designed to achieve in snow conditions a performance better than a normal tire [ ]. ource: Economic Commission for Europe of the United Nations (UN/ECE), R117 size M+ T Tread Pattern 245/70 R Conti Hybrid H3 1 Conti Urban HA3 265/70 R Conti Hybrid H3 1 1 Conti candinavia H3 1 Conti Urban HA3 M+ 285/70 R Conti Hybrid H3 1 1 Conti candinavia H3 305/70 R Conti Hybrid H3 1 1 Conti Urbancan HA3 305/70 R Conti Urban HA3 M+ 315/70 R Conti Hybrid H3 1 1 HW 2 CAN 365/70 R HC 295/80 R Conti Hybrid H3 1 1 HW 2 CAN 1 Conti Coach HA3 1 Conti CityPlus HA3 1 1 HW 2 Coach 1 HC 1 315/80 R Conti Hybrid H3 1 1 HW 2 CAN 1 Conti Coach HA3 1 1 HW 2 Coach 1 HC 1 10 R T9 12 R Conti Hybrid H3 1 HC 1 13 R HC 1 1 HO

17 Technical ata Book rive size M+ T Tread Pattern 245/70 R Conti Hybrid L3 265/70 R Conti Hybrid L3 size M+ T Tread Pattern 275/70 R Conti Hybrid H3 1 1 HW 2 CAN Trailer size M+ T Tread Pattern 205/65 R HTR 2 245/70 R HTL 2 205/75 R Conti Hybrid L3 1 1 Conti Urbancan H3 1 HTR 2 215/75 R Conti Hybrid L3 315/70 R Conti EcoPlus H3 1 1 Conti candinavia HT3 1 1 Conti candinavia L3 1 1 Conti Hybrid H3 215/75 R HTL 2 225/75 R Conti Hybrid L3 235/75 R Conti Hybrid L3 1 1 HW 2 CAN 295/80 R HL 1 1 HTR Conti candinavia HT3 1 1 Conti candinavia L3 1 1 Conti Hybrid H3 235/75 R HTL 2 8 R LR 8.5 R LR R LR 1 10 R LR 1 245/70 R Conti Hybrid H3 265/70 R Conti Hybrid H3 1 1 Conti candinavia H3 285/70 R Conti Hybrid H3 1 1 Conti candinavia H3 305/70 R Conti Hybrid H3 315/45 R Conti EcoPlus H3 295/55 R Conti EcoPlus H3 385/55 R HU 1 1 HC 295/60 R Conti EcoPlus H3 1 1 Conti Hybrid H3 1 1 HW 2 CAN 315/60 R Conti EcoPlus H3 1 1 Conti Hybrid H3 1 1 Conti candinavia Ext H3 1 1 HW 2 CAN 1 HC 1 315/80 R Conti EcoPlus H3 1 1 Conti Hybrid H3 1 1 HW 2 CAN 1 1 HC 1 1 HO 10 R RM 12 R HC 1 13 R HW 1 1 HC 1 1 HO 7.00 R 16 1 LR R 16 1 LR R 20 1 RT R 20 1 HC 325/95 R 24 (12.00 R 24) 1 HC 1 1 HTR Conti candinavia HT3 445/45 R Conti Hybrid HT3 1 1 HTW 2 CAN 435/50 R Conti Hybrid HT3 385/55 R Conti Hybrid HT3 265/70 R Conti candinavia HT3 285/70 R Conti candinavia HT3 385/55 R Conti Hybrid HT3 1 1 HTW 2 CAN 385/65 R Conti Hybrid HT3 1 1 HTW 2 CAN 1 HTC 1 425/65 R HTC 445/65 R HTC 1 275/70 R HTC 1 1 HW 2 CAN 385/65 R HC

18 Technical ata Book pecifications and load capacities size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rim- TL 2) K 3) N 4) G 5) width Min. distance between rim centers Max. standard value in service fitment Outer- Rolling esign value tat. radius circumference Outer- + 1 % ± 1 % ± 1.5 % ± 2 % LI 1) (65) (73) (73) (80) (80) (87) (87) (94) (102) (94) (102) (109) (109) (116) (116) (123) (123) (131) (131) (137) 245/70 R 17.5 HTL 2 143/141 L (146/146 F) HTR 2 143/141 L (146/146 F) 18 L 120 (F 80) 18 L 120 (F 80) TL C C TL C C Conti candinavia HT3 143/141 L (146/146 F) 16 L 120 (F 80) TL C /65 R 17.5 HTR 2 129/127 J (132/132 F) 14 J 100 (F 80) TL C (65) 5.0 (73) (80) (87) (94) (102) (109) (116) (123) (131) /70 R 17.5 Conti Hybrid L3 136/134 M 14 M 130 TL C B Conti Hybrid L3 136/134 M 14 M 130 TL C /70 R 17.5 Conti Hybrid L3 Conti Hybrid L3 139/136 M 14 M 130 TL C B /136 M 14 M 130 TL C LC 137/134 L 14 L 120 TL C /75 R 17.5 Conti Hybrid L3 Conti Hybrid L3 124/122 M 12 M 130 TL C B /122 M 12 M 130 TL C ee flap inside back cover for footnotes

19 Technical ata Book size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 215/75 R 17.5 HTL 2 135/133 L 16 L 120 TL B C Conti Hybrid 126/124 M 12 M 130 TL C B 1 69 L Conti Hybrid L3 126/124 M 12 M 130 TL C 2 74 HTR 2 135/133 K 16 K 110 TL C 2 73 Conti candinavia L3 Conti candinavia L3 Conti candinavia HT3 126/124 M 12 M 130 TL C /124 M 12 M 130 TL C /133 K 16 K 110 TL C /75 R 17.5 Conti Hybrid L3 129/127 M 12 M 130 TL C B Conti Hybrid L3 129/127 M 12 M 130 TL C /75 R 17.5 HTL 2 143/141 L 16 L 120 TL B C Conti Hybrid 132/130 M 12 M 130 TL C B 1 69 L3 Conti Hybrid L3 132/130 M 12 M 130 TL C HTR 2 143/141 K (144/144 F) 16 K 110 (F 80) TL C C 2 71 Conti candinavia L3 Conti candinavia L3 132/130 M 12 M 130 TL C C /130 M 12 M 130 TL C 2 75 Conti candinavia HT3 143/141 K (144/144 F) 16 K 110 (F 80) TL C 2 72 ee flap inside back cover for footnotes

20 Technical ata Book size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 245/75 R 17.5 LR 134/132 M (136/134 L) 14 M 130 (L 120) TL C R 17.5 LR 117/116 L 10 L 120 TL F C LR 117/116 L 8 L 120 TL F C R 17.5 LR /120 L 12 L 120 TL E B LR /120 L 12 L 120 TL ** ** ** R 17.5 LR 1 129/127 L 14 L 120 TL E B LR 1 129/127 L 14 L 120 TL E C 2 74 LC 129/127 L (131/128 M) 14 L 120 TL C R 17.5 LR 1 134/132 L 16 L 120 TL E B LR 1 134/132 L 16 L 120 TL E C /45 R 19.5 HTL 1 160/ - J 22 J 100 TL C C HTL 1 160/ - J 22 J 100 TL Hybrid HT3 Conti Hybrid HT3 160/ - K 22 K 110 TL 160/ - J 22 J 100 TL B C 2 72 HTW 2 CAN 160/ - J 22 J 100 TL C C 2 73 HTW 2 CAN 160/ - J 22 J 100 TL 435/50 R 19.5 Conti Hybrid HT3 160/ - J 20 J 100 TL B C ee flap inside back cover for footnotes

21 Technical ata Book size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 385/55 R 19.5 Conti EcoPlus HT3 156/ - J 16 J 100 TL B C Conti Hybrid HT3 156/ - J 16 J 100 TL ** ** ** 245/70 R 19.5 Conti Hybrid H3 Conti Hybrid H3 136/134 M 16 M 130 TL C B /134 M 16 M 130 TL C Conti Hybrid HT3 141/140 K 18 K 110 TL C B 2 73 Conti Urban HA3 265/70 R 19.5 Conti Hybrid H3 Hybrid H3 136/134 M 16 M 130 TL ** ** ** 140/138 M 16 M 130 TL C B /138 M 16 M 130 TL Conti Hybrid H3 140/138 M 16 M 130 TL C 2 74 Conti Hybrid HT3 143/141 K 16 K 110 TL C B 2 73 Conti candinavia H3 140/138 M 16 M 130 TL C C 2 73 Conti candinavia H3 140/138 M 16 M 130 TL C 2 75 Conti candinavia HT3 143/141 K 18 K 110 TL C 2 72 Conti Urban HA3 M+ 140/138 M 16 M 130 TL C C 1 70 ee flap inside back cover for footnotes

22 Technical ata Book size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 285/70 R 19.5 Conti Hybrid H3 Conti Hybrid H3 Hybrid H3 146/144 M 16 M 130 TL C B /144 M 16 M 130 TL C C /144 M 16 M 130 TL Conti Hybrid HT3 150/148 K 18 K 110 TL C B 2 73 Conti candinavia H3 Conti candinavia H3 Conti candinavia HT3 145/143 M 16 M 130 TL C /143 M 16 M 130 TL C /148 K 18 K 110 TL C C /70 R 19.5 Conti Hybrid H3 148/145 M 18 M 130 TL C B Conti Hybrid H3 148/145 M 18 M 130 TL C C /45 R 22.5 Conti EcoPlus H3 147/145 L 16 L 120 TL C /50 R 22.5 Conti EcoPlus H3 XL HW 2 CAN XL 156/ - K 18 K 110 TL C C / - K 18 K 110 TL C C /55 R 22.5 Conti EcoPlus H3 147/145 K 16 K 110 TL C B ee flap inside back cover for footnotes

23 Technical ata Book size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 385/55 R 22.5 Conti EcoPlus H3 160/ - K (158/ - L) 20 K 110 (L 120) TL B B Conti EcoPlus HT3 160/ - K (158/ - L) 20 K 110 (L 120) TL A C 1 69 EcoPlus HT3 160/ - K (158/ - L) 20 K 110 (L 120) TL Conti Hybrid H3 160/ - K (158/ - L) 20 K 110 (L 120) TL C B 2 73 Hybrid HT3 160/ - K (158/ - L) 20 K 110 (L 120) TL Conti Hybrid HT3 HTR 2 160/ - K (158/ - L) 160/ - K (158/ - L) 20 K 110 (L 120) 20 K 110 (L 120) TL B B 1 70 TL C C 2 73 HTR 2 160/ - K (158/ - L) 20 K 110 (L 120) TL HW 2 CAN 160/ - K (158/ - L) 20 K 110 (L 120) TL C 2 73 HTW 2 CAN 160/ - K (158/ - L) 20 K 110 (L 120) TL C 2 73 HTW 2 CAN 160/ - K (158/ - L) 20 K 110 (L 120) TL HU 1 160/ - K 20 K 110 TL C C 1 70 HC 158/ - K (160/ - J) 18 K 110 (J 100) TL C 2 76 ee flap inside back cover for footnotes

24 Technical ata Book size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 295/60 R 22.5 Conti EcoPlus H3 150/147 L 18 L 120 TL C B Conti EcoPlus H3 150/147 L 18 L 120 TL C B 1 72 EcoPlus H3 150/147 L 18 L 120 TL Conti Hybrid H3 150/147 L 18 L 120 TL C B 1 73 H Hybrid 150/147 L 18 L 120 TL 315/60 R 22.5 Conti EcoPlus H3 XL HTR 2 150/147 L 18 L 120 TL C C 1 70 HW 2 CAN 150/147 L 18 L 120 TL C /150 L 20 L 120 TL B B HL /148 L 20 L 120 TL C B Conti EcoPlus H3 EcoPlus H3 Conti Hybrid H3 H Hybrid HW 2 CAN XL 152/148 L 20 L 120 TL C B /148 L 20 L 120 TL 152/148 L 20 L 120 TL C B /148 L 20 L 120 TL 154/150 L 20 L 120 TL C C 2 73 HW 2 CAN 152/148 L 20 L 120 TL C 2 75 Conti Urban HA3 M+ 152/148 J (154/150 E) 16 J 100 (E 70) TL C B 2 71 Urban HA3 M+ 152/148 J (154/150 E) 16 J 100 (E 70) TL ee flap inside back cover for footnotes

25 Technical ata Book size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 385/65 R 22.5 HL / - K (158/ - L) Conti EcoPlus HT3 160/ - K (158/ - L) 20 K 110 (L 120) 20 K 110 (L 120) TL C B TL A C EcoPlus HT3 160/ - K (158/ - L) 20 K 110 (L 120) TL HTL 2 160/ - K (158/ - L) 20 K 110 (L 120) TL B C 1 70 Conti Hybrid H3 160/ - K (158/ - L) 20 K 110 (L 120) TL C B 2 73 HR 2 XL 164/ - K 20 K 110 TL C C 2 73 HR 2 160/ - K (158/ - L) 20 K 110 (L 120) TL Hybrid HT3 160/ - K (158/ - L) 20 K 110 (L 120) TL Conti Hybrid HT3 160/ - K (158/ - L) 20 K 110 (L 120) TL B B 1 70 HTR 2 XL 164/ - K 20 K 110 TL B C 2 71 HTR 2 160/ - K (158/ - L) 20 K 110 (L 120) TL C C 2 73 HTR 2 E 160/ - K (158/ - L) 20 K 110 (L 120) TL B C 2 71 HTR 2 160/ - K (158/ - L) 20 K 110 (L 120) TL HW 2 CAN 160/ - K (158/ - L) 20 K 110 (L 120) TL C 2 73 HTW 2 CAN 160/ - K (158/ - L) 20 K 110 (L 120) TL C 2 73 HTW 2 CAN 160/ - K (158/ - L) 20 K 110 (L 120) TL HC 1 XL 164/ - K 20 K 110 TL C C 2 73 ee flap inside back cover for footnotes

26 Technical ata Book size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 385/65 R 22.5 HC 1 160/ - K (158/ - L) HC 162/ - K (164/ - J) 20 K 110 (L 120) 20 K 110 (J 100) TL C C TL C HTC 1 160/ - K 20 K 110 TL C 2 73 HTC 1 E 160/ - K 20 K 110 TL B 2 73 HTC 1 160/ - K 20 K 110 TL 425/65 R 22.5 HTR 2 165/ - K 20 K 110 TL B C HTC 165/ - K 16 K 110 TL C C /65 R 22.5 HTR 2 169/ - K 20 K 110 TL C C HTC 1 169/ - K 20 K 110 TL C C /70 R 22.5 HR 2 A 140/137 M (142/140 L) 16 M 130 (L 120) TL C C /70 R 22.5 Conti Hybrid H3 Conti Hybrid H3 148/145 M 18 M 130 TL C B /145 M 16 M 130 TL B HW 2 CAN 148/145 M 16 M 130 TL E C 2 75 Conti Urban HA3 150/145 J (152/148 E) 16 J 100 (E 70) TL C B 1 70 Conti Urban HA3 M+ 150/145 J (152/148 E) 16 J 100 (E 70) TL B 1 70 Urban HA3 M+ 150/145 J (152/148 E) 16 J 100 (E 70) TL HU 1 148/145 J (152/148 E) 16 J 100 (E 70) TL ee flap inside back cover for footnotes

27 Technical ata Book size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 275/70 R 22.5 HU 1 M+ Conti Urbancan HA3 148/145 J (152/148 E) 150/145 J (152/148 E) 16 J 100 (E 70) 16 J 100 (E 70) TL TL C Conti Urbancan H3 150/145 J (152/148 E) 16 J 100 (E 70) TL C 2 75 Urbancan H3 150/145 J (152/148 E) 16 J 100 (E 70) TL HTC 148/145 J 16 J 100 TL E C /70 R 22.5 HR 1 152/148 L (150/148 M) Conti Urban HA3 M+ 152/148 K (154/150 E) 18 L K 110 (E 70) TL C B TL C B /70 R 22.5 Conti EcoPlus H3 XL HL /150 L (154/150 M) 154/150 L (152/148 M) 18 L L 120 TL B B TL C B Conti EcoPlus H3 154/150 L (152/148 M) 18 L 120 TL B B 1 72 EcoPlus H3 154/150 L (152/148 M) 18 L 120 TL Conti Hybrid H3 XL 156/150 L (154/150 M) 18 L 120 TL C B 1 70 Conti Hybrid H3 154/150 L (152/148 M) 18 L 120 TL C B 1 70 Conti Hybrid H3 154/150 L (152/148 M) 18 L 120 TL C B 1 73 Hybrid H3 154/150 L (152/148 M) 18 L 120 TL ee flap inside back cover for footnotes

28 Technical ata Book size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 315/70 R 22.5 H Hybrid HR 2 154/150 L (152/148 M) 154/150 L (152/148 M) 18 L L 120 TL TL Cityervice HA3 154/150 L (152/148 M) 18 L 120 TL Cityervice H3 154/150 L (152/148 M) 18 L 120 TL HW 2 CAN XL HW 2 CAN 156/150 L (154/150 M) 154/150 L (152/148 M) 18 L L 120 TL C 2 73 TL C 2 73 HW 2 CAN 154/150 L (152/148 M) 18 L 120 TL C 2 75 HW 2 CAN 152/148 M (154/150 L) 16 M 130 (L 120) TL CityPlus HA3 154/150 L (152/148 M) L 120 TL 365/70 R 22.5 HC 162/ - K 16 K 110 TL C /80 R 22.5 HL1+ COACH 152/148 M 16 M 130 TL C B HL 2+ XL 154/148 M 16 M 130 TL C B 1 70 HL /148 M 16 M 130 TL C B HL 1 152/148 M 18 M 130 TL C 2 74 Conti Hybrid H3 XL 154/148 M 16 M 130 TL C B 1 69 HR 2 152/148 M 16 M 130 TL C C 2 73 Conti Hybrid H3 152/148 M 16 M 130 TL B 1 73 ee flap inside back cover for footnotes

29 Technical ata Book size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 295/80 R 22.5 Hybrid H3 152/148 M 16 M 130 TL HR 2+ E 152/148 M 16 M 130 TL E C 2 76 H Hybrid 152/148 M 16 M 130 TL HR 2 152/148 M 16 M 130 TL Cityervice HA3 Cityervice H3 152/148 M 18 M 130 TL 152/148 M 16 M 130 TL HW 2 CAN 152/148 M 16 M 130 TL C 2 73 Conti candinavia Ext H3 152/148 M 16 M 130 TL HW 2 CAN 152/148 M 16 M 130 TL E C 2 75 HW 2 CAN Conti Coach HA3 Conti Coach HA3 E Conti Coach HA3 AC Conti CityPlus HA3 152/148 M 16 M 130 TL 154/149 M 16 M 130 TL B A /149 M 16 M 130 TL C B /149 M 16 M 130 TL 154/149 M 16 M 130 TL C A 1 69 HU 152/148 J 16 J 100 TL C 1 70 HW 2 Coach XL 154/149 M 16 M 130 TL C 2 73 ee flap inside back cover for footnotes

30 Technical ata Book size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 295/80 R 22.5 HW 2 Coach 152/148 M 16 M 130 TL C HW 2 Coach 154/150 M 16 M 130 TL XL HW 2 Coach 152/148 M 16 M 130 TL HC 1 152/148 K 20 K 110 TL C 2 73 HC 1 152/148 K 16 K 110 TL C 2 74 HC 1 315/80 R 22.5 Conti EcoPlus H3 Conti EcoPlus H3 152/148 K 16 K 110 TL 156/150 L (154/150 M) 156/150 L (154/150 M) 20 L L 120 TL B B TL B B EcoPlus H3 156/150 L (154/150 M) 20 L 120 TL Conti Hybrid H3 156/150 L (154/150 M) 20 L 120 TL C B 1 69 HR 2 XL XL 158/150 L 20 L 120 TL C C 2 73 HR 2 E 156/150 L (154/150 M) 20 L 120 TL C 2 73 Hybrid H3 156/150 L (154/150 M) 20 L 120 TL Conti Hybrid H3 156/150 L (154/150 M) 20 L 120 TL B 1 73 HR 2+ E 156/150 L (154/150 M) 20 L 120 TL C 2 76 H Hybrid 156/150 L (154/150 M) 20 L 120 TL HR 2 156/150 L (154/150 M) 20 L 120 TL ee flap inside back cover for footnotes

31 Technical ata Book size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 315/80 R 22.5 Cityervice HA3 Cityervice H3 156/150 L (154/150 M) 156/150 L (154/150 M) 20 L L 120 TL TL HW 2 CAN 156/150 L (154/150 M) 20 L 120 TL C 2 73 HW 2 CAN 156/150 L (154/150 M) 20 L 120 TL E C 2 75 HW 2 CAN Conti Coach HA3 156/150 L (154/150 M) 156/150 L (154/150 M) 20 L L 120 TL TL B A 2 71 HW 2 Coach 156/150 L (154/150 M) 20 L 120 TL C 2 73 HC 1 156/150 K 18 K 110 TL C 2 73 HC 1 E 156/150 K 18 K 110 TL E C 2 73 HC 1 156/150 K 16 K 110 TL ** ** ** HC 1 E 156/150 K 18 K 110 TL ** ** ** HC 1 156/150 K 14 K 110 TL HO 156/150 G 18 G 90 TL 9 R 22.5 HR 133/131 L 12 L 120 TL C R 22.5 RM 144/142 K 14 K 110 TL E C HR 144/142 K 14 K 110 TL C 1 70 T9 140/138 K 14 K 110 TL R 22.5 HR 148/145 L 16 L 120 TL C C HU 1 148/145 J 16 J 100 TL E C ee flap inside back cover for footnotes

32 Technical ata Book size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 6) (bar) (psi) Pattern LI/I 1) PR peed index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 12 R 22.5 Conti Hybrid H3 HR 1 E 152/148 L (150/148 M) 152/148 L (150/148 M) 16 L L 120 TL C B TL C HR 152/148 L (150/148 M) 16 L 120 TL HR 1 E 152/148 L 16 L 120 TL F C 2 75 Conti CityPlus HA3 152/148 L (150/148 M) 16 L 120 TL C C 2 71 HU 152/148 J 16 J 100 TL C 1 70 HC 1 152/148 K 16 K 110 TL C 2 73 HC 1 E 152/148 K 16 K 110 TL C 2 73 HC 1 152/148 K 16 K 110 TL ** ** ** HC 1 E 152/148 K 16 K 110 TL ** ** ** 13 R 22.5 HR 154/150 L (156/150 K) 18 L 120 (K 110) TL C HC 1 156/150 K 18 K 110 TL C 2 73 HC 1 E 156/154 K 18 K 110 TL C HC 1 156/150 K 18 K 110 TL ** ** ** HC 1 E 156/150 G (154/150 K) 18 G 90 (K 110) TL E C 2 74 HC 1 156/150 K (156/150 G) 20 K 110 (G 90) TL HO 149/146 J 18 J 100 TL HO 154/150 G 16 G 90 TL ee flap inside back cover for footnotes

33 Technical ata Book Regrooving recommendations egment Goods All Continental tires on which regrooving is permitted have on both sidewalls, in accordance with tread profile Conti EcoPlus H3 Conti EcoPlus H3 ECE regulation 54, the word REGROOVABLE The additional tread depth of up to 4 mm gained by regrooving means a significant increase in performance. As part of their design, all-steel truck tires have a additional tread available as a result of regrooving casing steel belt 2.0 mm of under tread additional steel belt A B B A A B A A B A so-called tread stock between the upper edge of the belt and the tread grooves. This tread stock is Example: intended to prevent stones etc. penetrating into the steel belt and the casing. size 315/80 R 22.5 Provided it is marked REGROOVABLE, a commercial vehicle tire may be regrooved down to a residual undertread thickness of 2 mm above the breaker or belt. All addi tional regulations of Original tread depth of new tire Additional tread as a result of regrooving 20.0 mm 4.0 mm A B B B A the respective country must be met. epth epth Although tires can be retreaded after reaching the legal wear limit, regrooving is not advisable in Regrooving should be carried out by an expert, in order to avoid premature failure as well as any 355/50 R A:10 B:8 295/60 R A:8 B:4 every case. The tread stock thickness is reduced and stones etc. can more easily penetrate and damage the steel belts, leading to rust formation. reduction in the tire s suitability for retreading. In some countries (e.g. Germany for KOM /55 R A:10 B:8 315/70 R A:10 B:8 315/60 R A:8 B:4 This has a decidedly negative effect on the tire s suitability for remolding. coaches and Austria for coaches) regrooving of front axle tires for coaches is prohibited. In 315/80 R A:10 B:8 general, regrooving on front axle coach tires is The best time for regrooving is when the tread is not recommended. worn down to about 3 mm. The tire must then be checked to make sure the wear is even all round. All Continental tires on which regrooving is Attention should be paid to local or uneven wear permitted are marked regroovable. patches. Tread depth measuring points ( 36 min. tread depth )

34 Technical ata Book Conti EcoPlus H3 / EcoPlus H3 Conti EcoPlus H3 Conti EcoPlus HT3 / EcoPlus HT3 A B B B B B B B A A B B B B B B B A epth 295/55 R A:8 B:5 epth 315/45 R A:7 B:5 epth 385/55 R /60 R A:7 B:5 385/55 R /60 R A:8 B:5 385/65 R /70 R A:8 B:5 315/80 R A:8 B:5 Tread depth measuring points ( 36 min. tread depth )

35 Technical ata Book HL 2+ ECO-PLU / HL 2+ XL HL 1 ECO-PLU HL ECO-PLU A B B A A B B B A epth 355/50 R A:16 B:12 epth 315/70 R epth 315/70 R /55 R A:16 B:12 295/80 R /80 R /60 R A:16 B:12 315/80 R /80 R /60 R A:16 B:12 385/65 R A:16 B:12 315/70 R A:16 B:12 295/80 R A:16 B:12 315/80 R A:16 B:12 Tread depth measuring points ( 36 min. tread depth )

36 Technical ata Book HL 2+ ECO-PLU HL 1 ECO-PLU H HYBRI H HYBRI Z1 Z1 A A B B B B B A A B A B A B A B A B A B B A B A B A B A B A B Z2 Z2 A B A B A B A B A A B A B A B A B A epth 295/55 R epth 315/70 R A:10 B:5-6 epth 295/60 R 22.5 Z2 3.0 A:6 B:10 epth 295/60 R 22.5 Z2 2.5 A:6 B:10 295/60 R /80 R A:10 B: /60 R 22.5 Z1 3.0 A:6 B:10 315/60 R 22.5 Z1 2.5 A:6 B:10 315/60 R /80 R A:10 B: /70 R 22.5 Z1 2.0 A:6 B:10 315/70 R 22.5 Z1 2.0 A:6 B:10 315/70 R /80 R 22.5 Z2 3.0 A:6 B:10 295/80 R 22.5 Z2 2.5 A:6 B:10 315/80 R /80 R 22.5 Z2 3.0 A:6 B:10 315/80 R 22.5 Z2 3.0 A:6 B:10 Tread depth measuring points ( 36 min. tread depth )

37 Technical ata Book HTL 2 ECO-PLU HTL 1 ECO-PLU / Conti Hybrid H3 / Conti Hybrid H3 XL Conti Hybrid L3 A B B B A epth 245/70 R epth 445/45 R epth 245/70 R epth 245/70 R /75 R /55 R /70 R /70 R /75 R /55 R /70 R /75 R /65 R /70 R /75 R /55 R A:10 B:8 225/75 R /65 R A:10 B:8 235/75 R /70 R /70 R /80 R /80 R R Tread depth measuring points ( 36 min. tread depth )

38 Technical ata Book Conti Hybrid H3 Conti Hybrid H3 / Hybrid H3 Conti Hybrid L3 A B B B B B B B A epth 295/60 R A:7 B:6 epth 245/70 R epth 245/70 R /60 R A:7 B:6 265/70 R /70 R /70 R A:7 B:6 285/70 R /75 R /70 R A:7 B:6 305/70 R /75 R /80 R A:7 B:6 225/75 R /80 R A:7 B:6 235/75 R Tread depth measuring points ( 36 min. tread depth )

39 Technical ata Book Conti Hybrid HT3 / Hybrid HT3 Conti Hybrid HT3 A B B A A B B B A epth 245/70 R A:9 B:7 265/70 R A:9 B:7 285/70 R A:9 B:7 305/70 R A:10 B:8 385/55 R A:10 B:7 385/65 R A:10 B:8 epth 445/45 R A:8 B:6 435/50 R A:8 B:6 Tread depth measuring points ( 36 min. tread depth )

40 Technical ata Book HR 2 HR 1 HR 1 HR B A B A B epth 385/55 R epth 12 R epth 385/55 R epth 9 R A:10-12 B: /65 R /70 R /60 R R A:10-12 B: /70 R /70 R /60 R R A:10-12 B: /80 R /70 R /65 R R A:10-12 B: /80 R /70 R R A:10-12 B: /60 R /70 R /70 R /70 R /70 R /80 R /80 R Tread depth measuring points ( 36 min. tread depth )

41 Technical ata Book LR 1+ / LR 1 LR HR 2+ HR 2+ epth 8.5 R epth 8 R 17.5 C epth 315/80 R epth 315/70 R R R /80 R R R /70 R /70 R /75 R /75 R /75 R /75 R /75 R /75 R /75 R /75 R /75 R Tread depth measuring points ( 36 min. tread depth )

42 Technical ata Book HR 2+ E / HR 2 E / HR 2 HR 2 HR 2 epth 315/70 R epth 295/80 R epth 315/80 R /80 R /80 R /80 R Tread depth measuring points ( 36 min. tread depth )

43 Technical ata Book LR 1+ / LR 1+ / LR 1 LR HTR 2 / HTR 2 HTR 2 / HTR 2 A A B B B A A B A A A B A A A B epth 8.5 R A:11 B:5-7 epth 8 R 17.5 C epth 205/65 R epth 295/60 R R A:11 B: R /70 R R A:11 B: /75 R /70 R A:9-11 B: /75 R /70 R A:7-9 B: /55 R /75 R A:8-10 B: /65 R /75 R A:8-10 B: /65 R /75 R A:8-10 B: /65 R /75 R A:9-11 B:5-7 Tread depth measuring points ( 36 min. tread depth )

44 Technical ata Book HTR 1 / HTR 1 HTR / HTR HTR epth 245/70 R epth 385/65 R epth 315/80 R /70 R /70 R R /70 R /70 R /55 R /70 R /65 R Tread depth measuring points ( 36 min. tread depth )

45 Technical ata Book HC 1 / HC 1 / HC 1 E HC / LC epth 385/65 R /80 R /80 R R R R epth 9.5 R /70 R /80 R /80 R R R Tread depth measuring points ( 36 min. tread depth )

46 Technical ata Book HC 1 / HC 1 HC 1 E HC / HC Z1 B A B B A B B A B B A B Z2 A B A B A epth 315/80 R 22.5 Z2 3.5 A:12 B:7 epth 315/80 R A:12 B:7 epth 385/55 R R 22.5 Z1 3.5 A:12 B:7 12 R A:12 B:7 385/65 R R 22.5 Z1 3.5 A:12 B:7 13 R A:12 B:7 295/80 R /80 R R R Tread depth measuring points ( 36 min. tread depth )

47 Technical ata Book HTC 1 / HTC 1 E HTC 1 HTC A B A B A B A A B A B A B A epth 385/65 R A:10 B:7 epth 385/65 R A:10 B:7 epth 385/65 R /65 R A:10 B:7 425/65 R /65 R /70 R Tread depth measuring points ( 36 min. tread depth )

48 Technical ata Book Cityervice HA3 Cityervice H3 Conti candinavia H3 Conti candinavia L3 A B B A A B B B B B A epth 295/80 R A:9 B:11 epth 295/80 R A:10 B:6-5 epth 265/70 R epth 215/75 R /80 R A:9 B:11 315/80 R A:10 B: /70 R /75 R Tread depth measuring points ( 36 min. tread depth )

49 Technical ata Book Conti candinavia H3 Conti candinavia L3 Conti candinavia HT3 Conti candinavia HT3 epth 265/70 R epth 215/75 R epth 265/70 R epth 215/75 R /70 R /75 R /70 R /75 R /70 R Tread depth measuring points ( 36 min. tread depth )

50 Technical ata Book HW 2 CANINAVIA / XL HW CANINAVIA / HW 2 CANINAVIA / HW CANINAVIA / epth 355/50 R epth 265/70 R epth 295/60 R epth 275/70 R /55 R /70 R /60 R /70 R /60 R /55 R 22.5 * /70 R /80 R /65 R /65 R 22.5 * /70 R /80 R /70 R /70 R /80 R /80 R /70 R /80 R /80 R /80 R R /80 R * alternative tread pattern Tread depth measuring points ( 36 min. tread depth )

51 Technical ata Book HTW 2 CANINAVIA HTW 2 CANINAVIA A B B B A epth 385/55 R /65 R epth 445/45 R A:11 B:8 Tread depth measuring points ( 36 min. tread depth )

52 Technical ata Book egment People Conti Coach HA3 Conti Coach HA3 AC Conti Coach HA3 E Conti CityPlus HA3 epth epth epth epth 295/80 R /80 R /80 R R /80 R /80 R Tread depth measuring points ( 36 min. tread depth )

53 Technical ata Book Conti Urban HA3 Conti Urban HA3 M+ / Conti Urban HA3 M+ HU 1 M+ / HU 1 M+ epth 275/70 R epth 265/70 R epth 305/70 R epth 275/70 R /60 R /70 R Tread depth measuring points ( 36 min. tread depth )

54 Technical ata Book HU 1 / HU 1 HU HU 1 HU / HU B A A A B A B B B A epth 275/70 R epth 295/80 R A:8-10 B:3-4 epth 385/55 R epth 275/70 R A:8-10 B: /70 R /70 R R R A:8-10 B:3-4 Tread depth measuring points ( 36 min. tread depth )

55 Technical ata Book HW 2 COACH / / XL Conti Urbancandinavia HA3 Conti Urbancandinavia H3 / epth 295/80 R epth 275/70 R epth 275/70 R /80 R Tread depth measuring points ( 36 min. tread depth )

56 Technical ata Book egment Construction Conti Hybrid H3 / Conti Hybrid H3 XL Conti Hybrid H3 HC 1 / HC 1 / HC 1 E HC+ / HC / LC A B B B B B B B A A B B B A epth epth epth epth 385/55 R A:10 B:8 295/60 R A:7 B:6 385/65 R R /70 R /60 R A:7 B:6 295/80 R /70 R /70 R /70 R A:7 B:6 315/80 R /80 R /80 R /70 R A:7 B:6 11 R /80 R /80 R /80 R A:7 B:6 12 R R R /80 R A:7 B:6 13 R R Tread depth measuring points ( 36 min. tread depth )

57 Technical ata Book HC 1 / HC 1 HC 1 E HC / HC Z1 B A B B A B B A B B A B Z2 A B A B A epth 315/80 R 22.5 Z2 3.5 A:12 B:7 epth 315/80 R A:12 B:7 epth 385/55 R R 22.5 Z1 3.5 A:12 B:7 12 R A:12 B:7 385/65 R R 22.5 Z1 3.5 A:12 B:7 13 R A:12 B:7 295/80 R /80 R R R Tread depth measuring points ( 36 min. tread depth )

58 Technical ata Book HTC 1 / HTC 1 E HTC 1 HTC A B A B A B A A B A B A B A epth 385/65 R A:10 B:7 epth 385/65 R A:10 B:7 epth 385/65 R /65 R A:10 B:7 425/65 R /65 R /70 R Tread depth measuring points ( 36 min. tread depth )

59 Technical ata Book HO HO LC / HC B A B A B epth 13 R epth 315/80 R epth 265/70 R A:15 B:6 13 R /65 R A:25 B:7 Tread depth measuring points ( 36 min. tread depth )

60 Technical ata Book 15", 16", 20", 24" pecifications and load capacities size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 3) 6) (bar) (psi) Pattern LI/I 1) PR peed Index index and ref. speed (km/h) TT/ Rim- TL 2) K 3) N 4) G 5) width Min. distance between rim centers Max. standard Max. standard value in service value in service fitment Outer- Rolling Rolling tat. circumference tat. circumference esign value radius esign value radius Outer- + 1 % ± 1 % ± 1.5 % ± 2 % LI 1) (47) (65) (51) (73) (54) (80) (58) (87) (62) (94) (102) (65) (109) (69) (116) (69) (123) (73) (131) (80) 7.50 R 16 C HO + AN 112/110 N 8 N 140 TT F C (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) 7.00 R 16 LR + 117/116 L 12 L 120 TT E C LR + 117/116 L 12 L 120 TT ** ** ** R 16 LR + LR + 121/120 L 121/120 L L 120 L 120 TT TT E ** C ** 1 70 ** /85 R 20 HC 164/ - J 22 J 100 TL /85 R 20 HC 168/ - J (166/ - K) 20 J 100 (K 110) TL R 20 RT 4 HR 146/143 K 146/143 K K 110 K 110 TT TT E C C R 20 HR 150/146 K 16 K 110 TT C C ", 16", 20", 24" ee flap inside back cover for footnotes

61 Technical ata Book 15", 16", 20", 24" size Operating code EU tire label Rim dimensions Load capacity (kg) per axle at inflation pressure 3) (bar) (psi) Pattern LI/I 1) PR peed Index and ref. speed (km/h) TT/ Rimwidth TL 2) K 3) N 4) G 5) Min. distance between rim centers Max. standard value in service fitment Outer- esign value + 1 % tat. radius Rolling circumference Outer- ± 1 % ± 1.5 % ± 2 % LI 1) 4.5 (65) 5.0 (73) 5.5 (80) 6.0 (87) 6.5 (94) 7.0 (102) 7.5 (109) 8.0 (116) 8.5 (123) 9.0 (131) R 20 HR HC 154/150 K 154/151 K K 110 K 110 TT TT C C C C HC 154/150 K 18 K 110 TT E C HO AN 154/149 K 18 K 110 TT C R 20 HO AN 160/157 K 18 K 110 TL HO AN 160/157 K 18 K 110 TT HC 164/160 K (166/160 G) 22 K 110 (G 90) TL ** ** ** /95 R 24 (12.00 R 24) HR 1 162/160 K 20 K 110 TT C C HC 1 162/160 K 20 K 110 TL C HC 1 162/160 K 20 K 110 TT C 2 73 HC 1 162/160 K 20 K 110 TL C C 2 74 HC 1 162/160 K 20 K 110 TT C C 2 74 HC 162/160 K 20 K 110 TT 15", 16", 20", 24" ee flap inside back cover for footnotes

62 Technical ata Book 15", 16", 20", 24" Regrooving recommendations egment Goods All Continental tires on which regrooving is permitted have on both sidewalls, in accordance with tread profile HR 1 HR ECE regulation 54, the word REGROOVABLE The additional tread depth of up to 4 mm gained by regrooving means a significant increase in performance. As part of their design, all-steel truck tires have a additional tread available as a result of regrooving casing steel belt 2.0 mm of under tread additional steel belt so-called tread stock between the upper edge of the belt and the tread grooves. This tread stock is Example: intended to prevent stones etc. penetrating into the steel belt and the casing. size 315/80 R 22.5 Provided it is marked REGROOVABLE, a commercial vehicle tire may be regrooved down to a residual undertread thickness of 2 mm above Original tread depth of new tire Additional tread as a result of regrooving 20.0 mm 4.0 mm the breaker or belt. All addi tional regulations of the respective country must be met. epth epth Although tires can be retreaded after reaching the legal wear limit, regrooving is not advisable in Regrooving should be carried out by an expert, in order to avoid premature failure as well as any 325/95 R 24 * R every case. The tread stock thickness is reduced and stones etc. can more easily penetrate and damage the steel belts, leading to rust formation. This has a decidedly negative effect on the tire s suitability for remolding. reduction in the tire s suitability for retreading. In some countries (e.g. Germany for KOM-100 coaches and Austria for coaches) regrooving of front axle tires for coaches is prohibited. In general, regrooving on front axle coach tires is * alternative tread pattern R R R R ", 16", 20", 24" The best time for regrooving is when the tread is not recommended. worn down to about 3 mm. The tire must then be checked to make sure the wear is even all round. All Continental tires on which regrooving is Attention should be paid to local or uneven wear permitted are marked regroovable. patches. Tread depth measuring points ( 36 min. tread depth )