EM, MPT & Industrial Tyres

Transcription

1 EM, MT & Industrial s Technical databook 12 th edition

2 introduction and contents Introduction The extensive technical data and other information relating to tyres and accessories on the following pages has been compiled to reflect as accurately and completely as possible the current state of development. ue to changes in our product range the tyre sizes given in this guide are not always identical to our available range. For further information please contact us: Contents s, markings and definitions List of tread s List of tyre sizes... 6 marking... 8 Speed symbols and conversion tables sidewall marking and structures Load index Earthmover tyres 3 MITS a.s. Švehlova 1900, rague 10, Czech Republic For more information, including addresses of our sales organisations, please visit ERL Earthmover Radial Loader and grader service... NEW 12 ER Earthmover Radial Transport service... NEW 18 EM Earthmover Radial Light equipment EM Earthmover iagonal EM Excavator Roller & Tractor rader Crane tyres CR Crane Radial... NEW 44 Edition Multipurpose tyres MT Multipurpose Radial MT Multipurpose iagonal industrial tyres Industrial Radial.... NEW 60 FL Fork Lift tractor industrial tyres TI Tractor Industrial Radial TI Tractor Industrial iagonal skid steer tyres SK Skid Steer use and maintenance Use and Maintenance Fitting and removal instructions Earthmover tyres general information Ton Kilometer er Hour (TKH) values Rim specification Terms and shortcuts used in this catalogue... 96

3 tread s List of tread s ERL ERL ERL ERL ER MT MT MT ER ER EM EM EM-20 (NB 38) 26 FL fl fl fl EM-30 (NB 57) 26 EM EM EM EM FL fl fl Fl TI EM NB NB 38 EXTR 34 NB TR TI TI TI TI TI compactor 38 T UK 5 38 UK T TI T TR TR TR CR MT MT MT SRT 46 TR RI N RIE 73 T SK SK CH MT MT MT MT MT SK big boy 80 p. 12 p. 60 p. 44 p. 68 p. 46 p. 80

4 s List of tyre sizes Size (inch) lternative tyre size age earthmover radial tyres /80 R 18 (12.5 R 18) EM /70 R 18 EM /70 R 18 (16/70 R 18) EM /80 R 20 (12.5 R 20) EM /80 R 20 (14.5 R 20) EM /70 R 20 (16/70 R 20) EM /70 R 24 (16/70 R 24) EM /70 R 24 (17.5 L R 24) EM R 25 ERL R 25 ERL R 25 ERL-20 14, R 25 ERL-30 14, R 25 ERL-50 14, R 25 ER R 25 ER R 25 ERL-20 14, R 25 ERL-30 14, R 25 ERL-40 14, R 25 ERL-50 14, R 25 ER R 25 ER R 25 ER R 25 ERL-30 14, R 25 ERL-40 14, R 25 ER R 25 ER /65 R 25 ERL-30 14, /65 R 25 ER earthmover diagonal tyres NB NB 38 Extra NB NB 38 Extra EM NB NB 38 Extra EM EM NB EM NB COMCTOR COM. EXTR COM. SMOOTH R 20 COMCTOR 40 13/80 R 20 COMCTOR 40 Size (inch) lternative tyre size age /45 20 TR / TR / TR T T IN UK IN UK (22/70 24) EM EM EM EM EM EM EM EM EM EM EM EM EM EM EM-30 30, EM-60 30, IN UK IN UK T EM crane radial tyres /95 R 25 CR multipurpose radial tyres /80 R 18 (12.5 R 18) EM /80 R 20 (12.5 R 20) MT /80 R 20 (12.5 R 20) MT /80 R 20 (14.5 R 20) MT /80 R 20 (14.5 R 20) MT /70 R 20 (16/70 R 20) MT /90 R 22.5 SRT /70 R 24 (16/70 R 24) MT /70 R 24 (17.5 L R 24) MT multipurpose diagonal tyres MT MT MT MT MT MT MT Size (inch) lternative tyre size age MT MT MT MT MT MT MT MT MT MT MT MT /70 20 (405/70 20) MT /70 20 (405/70 20) MT /70 20 (405/70 20) MT /70 20 (16/70 20) MT /70 20 (16/70 20) MT MT /70 24 (16/70 24) MT /70 24 (16/70 24) MT industrial radial tyres R 20 FLR R 25 SC R 25 CH industrial diagonal tyres FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL /75 12 ( ) FL FL FL FL Size (inch) lternative tyre size age FL FL FL FL FL FL Tractor Industrial radial tyres /80 R 18 TI /70 R 24 IN TI /80 R 26 IN TI /80 R 28 IN TI Tractor Industrial diagonal tyres TR /80 18 TR /80 18 TR /70 20 TR /70 20 TR /80 24 TR /80 24 IN TI IN TI L 24 TI L 24 TR L 24 IN TI L 24 IN RI-n-RIE /70 24 IN TR /70 24 IN TI /70 24 IN TI IN TI IN TI T IN TI IN T Skid steer diagonal tyres SK SK SK / IN SK SK SK BI BOY SK SK BI BOY TR /80 18 BI BOY /80 18 BI BOY

5 tyre size marking speed symbols and conversion tables marking Speed symbols and conversion tables 750/65 R 25 SW 750 Nominal section (in mm) 65 spect ratio H/SW (in %) R Radial construction 25 Nominal rim (in inches) H Speed category Speed symbol B E F J K Speed (km/h) / Nominal section (in inches) 70 spect ratio H/SW (in %) Cross-ply construction ressure units conversion table 20 Nominal rim (in inches) O bar ka p.s.i (in inches) 8.50 Nominal section (in inches) bar Cross-ply construction ka Nominal rim (in inches) p.s.i L Nominal section (in inches) L Reduced aspect ratio Cross-ply construction 24 Nominal rim (in inches) SW O H Section Section height Rim Units conversion table Length 1 milimeter = Mass 1 pound (lb) = kg ressure 1 p.s.i. (lb/in 2 ) = ka Nominal section (in inches) Cross-ply construction 18 Nominal rim (in inches) 1 inch ( ) = 25.4 mm = m 1 metre (m) = ft 1 foot (ft) = m 1 kilometre (km) = mile 1 mile = 1609 m = km 1 kilogram (kg) = lb Volume 1 litre (l) = 0.21 gall 1 imperial gallon (imp.gal) = 4.55 l 1 kg/cm 2 = ka 1 bar = 100 ka (in inches) 5 Nominal section (in inches)

6 tyre sidewall marking and structure load index sidewall marking Load index LI kg LI kg LI kg LI kg /70 R L R 24 EM-02 Sign MITS Meaning Trademark of producer 440/70 R 24 marking 17.5 l R 24 lternative tyres size marking EM-02 attern code 147 Load index (LI 147 = 3075 kg) B Speed symbol (B = 50 km/h) 164 Load index (LI 164 = kg) 2 TUBELESS Speed symbol (2 = 10 km/h) Tubeless tyre irection of rotation structure attern Breaker Cord Inner Liner Carcass Cord Sidewall pex Bead Wire Bias (iagonal, cross-ply) pneumatic tyre in which the ply cords extend to the beads and are laid substantially at alternate angles less than 90 to the centre-line of the tread. Radial ly pneumatic tyre in which the ply cords extend to the beads and are laid substantially at 90 to the centre-line of the tread, the carcass being stabilised by an essentially inextensible circumferential belt

7 Earthmover radial tyres ERL Surface suitability chart ERL series / erd series TRCTION SN ERTH RVEL ROCK

8 ERTHMOVER RIL TYRES ERL erl-20 erl-30 erl-40 erl-50 ERL technical data and load capacities loader service Rim (permitted) New Max. in service Loaded static radius Section Rolling circumference depth li / ss Loader Loader service load capacity (kg) at speed (km/h) Static / ERL-20 (14.00/ C, / C) ERL R / ERL ERL (14.00/ C, * / C) ERL / (17.00/1.7 25) ERL ERL ERL / R * (17.00/1.7 25) R R /65 R 25 ERL-50 ERL-20 ERL-30 ERL-40 ERL-50 ERL-30 ERL-40 ERL / (17.00/1.7 25) / / / / / / / ERL-50 ERL-20 ERL-30 ERL-40 ERL-50 ERL-30 ERL-40 ERL-30 * / ** Index of tyre strength ** * ** ** *

9 ERTHMOVER RIL s ERl erl-20 erl-30 erl-40 erl-50 ERL technical data and load capacities grader service Rim (permitted) New Max. in service Loaded static radius Section Rolling circumference depth li / ss rader rader service load capacity (kg) at speed (km/h) R 25 ERL-20 ERL / (14.00/ C, 14.00/ C) 14.00/ (14.00/ C, 14.00/ C) ERL-20 ERL-30 * ERL / (17.00/1.7 25) R 25 ERL / (17.00/1.7 25) ERL-20 ERL-30 ERL-50 * ERL / (17.00/1.7 25) ERL / R 25 ERL-30 ERL / / ERL-20 ERL-30 ERL-40 ERL-50 * ERL / R 25 ERL-30 ERL / / ERL-30 ERL-40 * /65 R 25 ERL / ERL-30 * * / ** Index of tyre strength

10 Earthmover radial tyres ER ER series innovative and durable radial tyres for dumpers Transport service > Suitable for retreading thanks to high durability of carcass ER-40 ERL-20 ERL-30 ER-20 ER-30 ER R R R R /65 R 25 NEW > Reduced fuel consumption due to lower rolling resistance > Excellent driving comfort guaranteed by advanced construction > Higher resistance against tyre puncture > esigned for hard, demanding conditions > Excellent tyre life thanks to deep tread and positive share of tread > ood traction ER-20 ER-30 ER-40 (E-4) > esigned for soft and muddy terrain > Excellent traction > High durability > ood self-cleaning properties > esigned for mixed conditions of soft and hard terrain > eepest tread in category > High resistance to wear Traction life Resistance Riding comfort Retreading esigned for rocky terrain Excellent traction Universal application ER-20 (E-2) ER-30 (E-3) Traction Traction life life Resistance Resistance Riding comfort Riding comfort Retreading Retreading

11 ERTHMOVER RIL TYRES ERd er-20 er-30 er-40 ER technical data and load capacities transport service Rim (permitted) New Max. in service Loaded static radius Section Rolling circumference depth li / ss Transport Transport service load capacity (kg) at speed (km/h) R 25 ERL-20 ERL / (14.00/ C, 14.00/ C) 14.00/ (14.00/ C, 14.00/ C) * 157 B R 25 ER-20 ER / (17.00/1.7 25) 17.00/ (17.00/1.7 25) ** 177 B ER / R 25 ER / ** 185 B ER / R 25 ER-30 ER / / ** 193 B /65 R 25 ER / ** 190 B * / ** Index of tyre strength imensions of O rings Inside Section Circumference 17.5 R ± ± ± R R R /65 R ± ± ± 6

12 Earthmover radial tyres EM EM-01 EM /80 R 18 (12.5 R 18) 365/70 R /70 R 18 (16/70 R 18) 335/80 R 20 (12.5 R 20) 365/80 R 20 (14.5 R 20) 405/70 R 20 (16/70 R 20) 405/70 R 24 (16/70 R 24) 440/70 R 24 (17.5 L R 24) EM radial series tyres for lighter earthmoving machinery EM-01 > Non-directional tread for all-round application > Suitable above all for front loaders, telescopic loaders, backhoe loaders, dumpers and similar vehicles for light earthmoving work > ll steel radial construction EM-02 > with good traction properties > Excellent durability > Suitable above all for backhoe loaders, wheeled loaders, telescopic handlers and similar vehicles for light service > lso suitable for agricultural application Universal application Excellent traction EM-01 Traction life Resistance Riding comfort self cleaning EM-02 Traction life Resistance Riding comfort self cleaning

13 ERTHMOVER RIL TYRES Em em-01 em-02 EM technical data and load capacities Rim (permitted) New Max. in service Loaded static radius Section Rolling circumference li / ss Transport/ Loading load capacity (kg) at speed (km/h) /80 R 18 (12.5 R 18) 365/70 R /70 R 18 (16/70 R 18) 335/80 R 20 (12.5 R 20) 365/80 R 20 (14.5 R 20) 405/70 R 20 (16/70 R 20) 405/70 R 24 (16/70 R 24) 440/70 R 24 (17.5 L R 24) EM-02 EM-01 EM-01 EM-01 EM-01 EM-01 EM-01 EM (12 18) (12 20) (12 20) (11; 12 20) W 15 L B/ B/ B/ B/ B/ B/ B/ B/ B/

14 EM-20 EM-30 EM-60 EM-70 EM (22/70 24) Universal application 27 Excellent Excellent traction traction EM-70 (E-2/L-2) earthmover diagonal tyres EM EM-60 (L-3) designed mainly for heavy construction site machines and other machinery operating in combined conditions. Very good self-cleaning properties. EM-80 (l-2/-2) with excellent traction and self-cleaning properties. Tubeless tyre for construction machinery. with excellent durability and puncture resistance. Suitable for loaders in hard operating conditions. with good traction and minimal wheel slip, excellent cushioning, dumping and self-cleaning properties. Excellent traction and self-cleaning perfomances. Suitable for telescopic handlers, graders and loaders.

15 ERTHMOVER diagonal TYRES EM em-20 em-30 em-60 em-70 em-80 EM technical data and load capacities EM-80 EM-20 EM-30 EM-60 Rim (permitted) New Max. in service Loaded static radius Section Rolling circumference 12.00/ / / / li / ss Loader ly rating Loader service load capacity (kg) at speed (km/h) Static EM T 24 SC EM (22/70 24) /158 B 12 R EM / (13.00/1.4 25) EM EM / EM (13.00/1.4 25) EM EM / (13.00/1.4 25) 168 2/149 B 12 R Consult the tyre manufacturer for information on other applications of L-2 and L-3 tyres than on wheel loaders, grades, telescopic handlers or dozers. EM-80 EM-20 EM-30 EM-60 EM-20 EM / R / R /158 B 16 R /171 B 22 R

16 ERTHMOVER diagonal TYRES EM em-20 em-30 em-60 em-70 em-80 EM technical data and load capacities Rim (permitted) New Max. in service Loaded static radius Section Rolling circumference EM / EM / R / R EM-20 EM-30 EM-20 EM-30 EM-60 EM-30 EM / (15.00/2.5 25) 13.00/ (15.00/2.5 25) 17.00/ (17.00/1.7 25) 17.00/ (17.00/1.7 25) 17.00/ (17.00/1.7 25) / / Consult the tyre manufacturer for information on other applications of L-2 and L-3 tyres than on wheel loaders, grades, telescopic handlers or dozers. EM-20 EM-30 EM-30 EM-20 EM-30 EM-60 EM-60 EM-30 EM-60 li / ss Loader ly rating Loader service load capacity (kg) at speed (km/h) Static /180 B 28 R /183 B 32 R /167 B 16 R /170 B 20 R /174 B 24 R /171 B 16 R /177 B 20 R /183 B 28 R

17 ERTHMOVER diagonal TYRES EM em-20 em-30 em-60 em-70 em-80 EM technical data and load capacities Rim (permitted) New Max. in service Loaded static radius Section Rolling circumference EM / EM EM /188 B 28 R / EM-60 EM / (24.00/3.0 29) Consult the tyre manufacturer for information on other applications of L-2 and L-3 tyres than on wheel loaders, grades, telescopic handlers or dozers. EM-30 EM-60 EM-30 li / ss Loader ly rating Loader service load capacity (kg) at speed (km/h) Static /192 B 32 R /189 B 26 R Variation in load capacity with speed dependence imensions of O rings Speed (km/h) Load capacity + 60 % + 30 % + 13 % (0) 7 % 12 % 15 % Inside Section Circumference ± ± ± ± ± ± ± ± ± 6

18 excavator diagonal tyres EM, NB, TR EM-22 EM-23 NB 57 TR-12 New generation of tyre for excavators. Modified tread NB 38, giving excellent traction and self-cleaning properties. Wider by about 7 % in comparison with NB 38. Suitable above all for high power modern excavators. Higher resistance to puncture and tread wear due to higher filling of tread area. Special tread for stony and hard terrain. Higher resistance to puncture and tread wear due to higher filling of tread area. for stony and hard terrain. with excellent traction for flotation tyres, designed above all for powered wheels of agricultural and industrial machines. pplicable for trailed wheels as well. Surface suitability chart excavator tyres Crushed Rock ravel Road Sand Loam Mud EM-23 NB 57 EM-22 NB 38 NB 38 Extra TR-12 NB 38 Classic tread profile for universal application with good traction and self-cleaning properties. NB 38 Extra Wider tread area in comparison with NB 38 by about %. Better stability due to wider tread area.

19 excavator diagonal tyres EM, NB, tr em-22 nb-38 em-23 nb-38 extra nb-57 tr-12 Excavator technical data and load capacities / / / NB 38 TT NB 38 Extra TT EM-22 TT NB 38 Extra TT NB 38 TT NB 38 Extra TT EM-22 EM-23 NB 38 TT EM-22 TT NB 57 TT TR-12 TR-12 TR-12 Rim (permitted) (6.0; ) (6.0; ) (6.5; ) (7.0; ) (7.0; ) (7.0; ) (7.0; ) (7.0; ) (7.5 20) (7.5 20) (7.5 20) Tube Flap /1 eh /1 eh /1 eh /2 eh /2 eh /2 eh /2 eh /2 eh /2 eh /2 eh /2 eh New Max. in service Loaded static radius Section Rolling circumference Minimal dual spacing C C C NB 38 NB 38 Extra li / ss ly rating 122 B 14 R load capacity (kg) at speed (km/h) Static NB TT (6.5; ) 20/1 eh NB NB 38 Extra TT NB 38 Extra (6.5; ) 20/1 eh EM B 14 R NB38 Extra NB 38 NB38 Extra EM-22 EM-23 NB 38 EM-22 NB 57 TR-12 TR-12 TR B 14 R 146 B 16 R 148 B 16 R 140 E 16 R

20 roller & Tractor grader tyres compactor, td, tg, uk td-01 (r-1) Special tyre for rollers. The same tread for Compactor, Compactor Extra and Compactor Smooth. Traction with good durability suitable for industrial and agricultural application. T-02 (R-4) with good traction and self-cleaning properties. UK 5 (r-3) suitable for industrial and road construction equipment. suitable for industrial and road construction equipment.

21 roller & Tractor grader tyres compactor, td, tg, uk compactor td-01 tg-02 uk 5 uk 10 Roller & tractor grader technical data and load capacities R 20 13/80 R 20 COMCTOR TT COMCTOR EXTR TT COMCTOR SMOOTH TT COMCTOR TT COMCTOR TT Rim (permitted) (7.5 20) (8.5 20) (8.5 20) Tube Flap /2 eh /2 eh /2 eh /2 eh New Max. in service Loaded static radius Section Rolling circumference Minimal dual spacing / li / ss ly rating load capacity (kg) at speed (km/h) Static R R R

22 roller & Tractor grader tyres compactor, td, tg, uk compactor td-01 tg-02 uk 5 uk 10 Roller & tractor grader technical data and load capacities T-02 TT/ T-02 TT/ Rim (permitted) 8.00T SC (9.00/1.5 (C)) 8.00T SC (10.00 V SC) Tube Flap New Max. in service Loaded static radius Section Rolling circumference li / ss ly rating load capacity (kg) at speed (km/h) R R IN IN IN UK 5 UK 10 UK 5 UK 10 T-01 Rim (permitted) New Max. in service Loaded static radius Section Rolling circumference W W 15 L W W W UK 5 UK 10 UK 5 UK 5 UK 10 T-01 rating ly load capacity (kg) at speed (km/h) li / ss cyclic R B 8 R R R R T-01 variation in load capacity with speed dependence Speed (km/h) Load capacity % + 70 % + 50 % + 34 % + 23 % + 11 % + 7 % + 3 % (0) 4 % 9 % ll field applications: 8 tyres loads as in the table plus 7 % The inflation must be increased for: road transport and long transport with semi-trailer + 30 ka harvesting machines and front-end loader tractor application + 40 ka

23 crane radial tyres cr CR-01 new generation of crane tyre for improved productivity > Better performance due to high maximum speed up to 85 km/h > Mitas-Link, unique connection between tread blocks ensuring extended tyre life > eepest tread in category > Reduced fuel consumption thanks to all-steel construction improving rolling resistance > Improved operator comfort and low noise emissions in road high speed service > Open tread block design for excellent traction and easy self-cleaning in off-road application > Regroovable and suitable for retreading thanks to high durability of carcass > Homologated as M + s and meets requirements for winter conditions > Fully homologated according to EU irectives 92/93, 2001/43 and 2005/11 (noise homologation) imensions of O rings Inside Section Circumference /95 R ± ± ± 6 CR technical data and load capacities Rim (permitted) New Max. in service Loaded static radius Section Rolling circumference li / ss load capacity (kg) at speed (km/h) Static /95 R 25 CR-01 Traction CR /1.7 CR 25 (11.25/2.0 25) F service life resistance speed

24 MT multipurpose radial tyres MT, srt Multipurpose radial tyres universal tyres for on- and off-road use MT-20 MT-21 MT-22 EM-02 SRT 335/80 R 18 (12.5 R 18) 335/80 R 20 (12.5 R 20) 365/80 R 20 (14.5 R 20) 405/70 R 20 (16/70 R 20) 275/90 R /70 R 24 (16/70 R 24) 445/70 R 24 (17.5 L R 24) Longer service life Universal application MT-20 Traction life Resistance > Universal perennial tread > On- and off- road application > Municipal, military and other special vehicles > Non-directional tread > ood traction on- and off-the-road > Effective self-cleaning properties Excellent traction Rail and road application > ood traction properties > Excellent durability > lso suitable for agricultural application > Rail & Road application > Excellent durability > Longer service life

25 MULTIUROSE RIL TYRES EM, mpt, SRT em-02 mpt-20 mpt-21 mpt-22 srt Multipurpose radial technical data and load capacities Rim (permitted) New Max. in service Loaded static radius Section Rolling circumference li / ss load capacity (kg) at speed (km/h) /80 R 18 EM (12.5 R 18) (12 18) /80 R 20 (12.5 R 20) 335/80 R 20 (12.5 R 20) 365/80 R 20 (14.5 R 20) 365/80 R 20 (14.5 R 20) 405/70 R 20 (16/70 R 20) 275/90 R /70 R 24 (16/70 R 24) 445/70 R 24 (17.5 L R 24) MT-20 MT-21 MT-20 MT-21 MT-21 SRT MT-21 MT (12 20) (12 20) (12 20) (12 20) (12 20) (13 24) W 15 L K 139 J 152 K 152 J 152 J 153 J 152 J

26 multipurpose diagonal tyres MT MT-01 MT-02 MT-05 MT-06 with very good traction and self-cleaning properties. Suitable above all for loader applications. Universal tread for various application with good traction and self-cleaning properties Universal heavy-duty tread for on- and off-road application. Suitable mainly for municipal, military, on road service and other special service vehicles. with excellent traction properties and enhanced stability. Especially suitable for telescopic handlers and excavators. MT-03 MT-04 MT-07 MT-08 Universal tread for on- and off-road application with good traction. Suitable for municipal, on road service, agricultural and other special service vehicles. with excellent treadwear and durability. Maximum traction capabilities in soft soil. Non-directional tread, suitable for various special service vehicles. Robust tread with good traction and perfect stability. esigned especially for excavators and telescopic handlers in hard terrain.

27 MULTIUROSE diagonal TYRES mpt mpt-01 mpt-02 mpt-03 mpt-04 mpt-05 mpt-06 mpt-07 mpt-08 MT technical data and load capacities MT-01 MT-03 MT-04 Rim (permitted) (9 18) (9 18) (9 18) Tube Flap HS HS HS New Max. in service Loaded static radius Section Rolling circumference li / ss ly rating load capacity (kg) at speed (km/h) Static MT MT B 10 R MT MT R MT-01 MT-03 MT B 12 R R R R R R R

28 MULTIUROSE diagonal TYRES mpt mpt-01 mpt-02 mpt-03 mpt-04 mpt-05 mpt-06 mpt-07 mpt-08 MT technical data and load capacities MT-06 MT-08 MT-04 MT-05 MT-07 TT Rim (permitted) ( ) ( ) 9 20 (9 20 SC) 9 20 (9 20 SC) 9 20 (9 20 SC) Tube Flap New Max. in service Loaded static radius Section Rolling circumference li / ss ly rating load capacity (kg) at speed (km/h) Static MT MT ( ) B 16 R MT MT-03 ( ) R MT-06 MT-08 MT-06 MT-04 MT-05 MT R R R

29 MULTIUROSE diagonal TYRES mpt mpt-01 mpt-02 mpt-03 mpt-04 mpt-05 mpt-06 mpt-07 mpt-08 MT technical data and load capacities /70 20 (405/70 20) 16/70 20 (405/70 20) 405/70 20 (16/70 20) 405/70 20 (16/70 20) MT-05 MT-04 MT-03 MT-05 MT-04 MT-02 MT-04 MT-05 MT-01 MT-03 Rim (permitted) (11; SC) (11; SC) (11; SC) (11; SC) (11; SC) (13 20 SC) (13 20 SC) (13 20 SC) (13 20 SC) (13 20 SC) Tube Flap (11 20) (11 20) ( ) ( ) ( ) New Max. in service Loaded static radius Section Rolling circumference li / ss ly rating load capacity (kg) at speed (km/h) Static MT B 10 R MT-01 (11; SC) B 12 R R MT MT (11; SC) R MT-05 MT-04 MT-03 MT-05 MT-04 MT-02 MT-04 MT-05 MT-01 MT R R R R R R R R B 14 R B 16 R R

30 MULTIUROSE diagonal TYRES mpt mpt-01 mpt-02 mpt-03 mpt-04 mpt-05 mpt-06 mpt-07 mpt-08 MT technical data and load capacities Rim (permitted) Tube Flap New Max. in service Loaded static radius Section Rolling circumference MT MT R /70 24 (16/70 24) 405/70 24 (16/70 24) MT-01 MT (13 24 SC) (13 24 SC) 16/ / li / ss ly rating load capacity (kg) at speed (km/h) Static MT B 14 R MT R Variation in load capacity with speed dependence Speed (km/h) % + 30 % + 16 % + 10 % (0) speed category B % + 60 % + 24 % + 14 % + 10 % (0) % + 65 % + 30 % + 15 % + 6 % + 4 % + 1 % (0) % + 80 % + 50 % + 25 % + 15 % + 12 % + 10 % % + 7% + 4% (0)

31 INUSTRIL radial TYRES SC, FLR, Ch CH-01 FLR-01 SC R R R 25 Industrial radial tyres all-steel heavy-duty tyres for material handling machinery Reinforced Excelent 60 sidewall resistance 61 SC-01 FLR-01 handling Resistance life > esigned for straddle carriers > eveloped for excellent machine stability > Long tyre life and high puncture resistance handling Resistance life > esigned for fork lifts, container handers and terminal tractors > Increased tyre life guaranteed by advanced tread design > Excellent operator comfort thanks to all-steel construction > Improved rolling resistance for lower fuel consumption Longer service life CH-01 handling Resistance life > esigned especially for container handlers > High puncture resistance > Excellent stability due to reinforced sidewall > developed for long tyre life

32 INUSTRIL radial TYRES SC, FLR, Ch ch-01 flr-01 sc-01 Industrial radial technical data and load capacities New Max. in service Loaded Rolling load capacity (kg) at speed (km/h) Rim static circumference depth Terminal (permitted) Section radius li / ss Steering wheel Load wheel Side-loaders tractor Static R 20 FLR (8.50 V 20) Rim (permitted) New Max. in service Loaded static radius Section Rolling circumference depth li / ss Loader service load capacity (kg) at speed (km/h) Static R 25 SC / R 25 CH / ** *** **/*** Index of tyre strength

33 FL-07 Fl-08 fork lift diagonal tyres FL Fork lift diagonal tyres good handling in various service conditions FL-01 designed for heavy duty service. ood directional stability. FL-02 Rib/block tread combination providing good traction. ood directional control in various service conditions. Combination of rib/block tread. Combination of rib/block tread. Higher filling of tread. designed for heavy duty service. ood directional stability

34 fork lift diagonal tyres fl fl-01 fl-02 fl-03 fl-04 fl-05 fl-06 fl-07 fl-08 fl technical data and load capacities Rim (permitted) Tube Flap New Max. in service Loaded static radius Section Minimal dual spacing li / ss ly rating load capacity (kg) Load wheel Steering wheel R FL FL-03 TT R FL /4 I 8 (1) 138 FL R FL-01 FL-03 FL-08 TT FL-01 FL-03 FL R FL-08 TT 4.33 R FL-08 TT 4.33 R FL-01 FL-02 FL-08 TT 4.00 E FL-08 TT 6.00 E FL-01 FL-02 TT FL-08 TT 5.00 F 10 (5.50 F 10) 5.00 F 10 (5.50 F 10) FL-08 TT 6.50 F (218) 212 (218) FL R FL-08 FL-01 FL-02 FL R R R 12 R FL R FL-01 FL-02 FL R R R R R FL R FL-01 FL-02 TT 5.00 S FL-08 TT 5.00 S /75 12 ( ) FL-08 TT / ( ) FL-05 TT FL-07 TT FL-08 TT FL-04 FL (6.5 15) (260) TT FL-01 FL-02 FL-08 FL-08 FL-05 FL-07 FL-08 FL-04 FL R 14 R R R R R R R B 6 R B 10 R R R R R R FL-06 TT FL-08 TT FL-08 TT FL-08 TT FL R FL R FL R FL R (1) obligatory for 8 R and 10 R

35 Tractor industrial radial tyres TI TI-20 TI /80 R /70 R 24 IN 480/80 R 26 IN 440/80 R 28 IN TI series universal radial tyres for industrial and agricultural application TI-20 > New generation of tread > Suitable for construction, road and agricultural work > riority to traction > esigned for muddy conditions > Very good resistance to damage TI-22 > ood traction and effective self-cleaning properties > Excellent durability > Suitable for backhoe loaders, wheeled loaders, telescopic handlers and similar vehicles for light service > lso suitable for agricultural application Longer service life Excellent traction TI-20 Traction life Resistance Self cleaning TI-22 Traction life Resistance Self cleaning

36 TRCTOR INUSTRIl RIL TYRES ti ti-20 ti-22 Tractor industrial radial technical data and load capacities 340/80 R /70 R 24 IN 480/80 R 26 IN 440/80 R 28 IN TI-20 TI-22 TI-20 TI-20 Rim (permitted) (12 18, W 10 18, W 11 18) W 14 L 24 (W 15 L, W 16 L, 14, 16, W 14 L) W 15 L 26 (W 16 L 26) W 14 L 28 (W 15 L 28) New Max. in service Loaded static radius Section Rolling circumference li / ss load capacity (kg) at speed (km/h) cyclic

37 TRCTOR INUSTRIl diagonal TYRES g n r, td, tg, ti, tr Classic version of tread for industrial use. Industrial tread for use on backhoe loaders with 4 4 axles. Robust industrial tread with excellent traction properties. suitable for bigger skid steer loaders and front axles of backhoe loaders or telescopic platforms. suitable for backhoe loaders and other types of loaders with excellent self-cleaning properties and reinforced sidewall. Robust industrial with higher resistance to puncture and tread wear. Robust industrial with higher resistance to puncture and tread wear. with very good traction and self-cleaning properties. attern suitable above all for harder conditions due to optimised number of lugs. Excellent traction, suitable for industrial and agricultural application. Time proven for industrial and agricultural application with very good traction. with good traction.

38 TRCTOR INUSTRIl diagonal TYRES g n r, td, tg, ti, tr grip n Ride td-03 tg-01 ti-02 ti-04 ti-05 ti-06 ti-09 tr-01 tr-05 tr-09 tr-10 Tractor industrial diagonal technical data and load capacities Rim (permitted) New Max. in service Loaded static radius Section Rolling circumference li / ss ly rating load capacity (kg) free rolling / drive wheels at speed (km/h) / / / / / / / / / / / / / / / TR / / / / / / / / / / / / / / / /139 B 14 R / / / / / / / / / / / / / / / /80 18 TR (9 18) / / / / / / / / / / / R / / / / / / / / / / /80 18 TR-05 TT (12 18) / / / / / / / / / / / R / / / / / / / / / / /70 20 TR SC / / / / / / / / / / / R / / / / /

39 TRCTOR INUSTRIl diagonal TYRES g n r, td, tg, ti, tr grip n Ride td-03 tg-01 ti-02 ti-04 ti-05 ti-06 ti-09 tr-01 tr-05 tr-09 tr-10 Tractor industrial diagonal technical data and load capacities 400/ / /80 24 IN IN 17.5 l l 24 IN TR-01 TR-01 TI-05 TI-04 TI-02 TR-01 TI-05 RI-n-RIE Rim (permitted) New Max. in service Loaded static radius Section Rolling circumference 13 SC W (W 13 24) (W 14 L 24) W (W 14 L 24) (13 24, 14 24) (TW 14 L 24) W 15 L 24 (W 14 L 24) W 15 L 24 (W 14 L 24) W 15 L W 16 L W 16 L 24 (W 16 L 24) TR-01 TR-01 TI-05 TI-04 TR-01 TI-05 RI-n- -RIE li / ss ly rating load capacity (kg) at speed (km/h) Static cyclic B 14 R R R R R R R

40 TRCTOR INUSTRIl diagonal TYRES g n r, td, tg, ti, tr grip n Ride td-03 tg-01 ti-02 ti-04 ti-05 ti-06 ti-09 tr-01 tr-05 tr-09 tr-10 Tractor industrial diagonal technical data and load capacities 500/70 24 IN IN IN IN TR-01 TI-05 TI-06 TI-06 T-01 TI-09 T-03 Rim (permitted) W 14 L 24 (W 15 L, W 16 L, 14, 16, TW 14 L) W 14 L 24 (W 15 L, W 16 L, 14, 16, TW 14 L) W 16 L 24 (W 15 L 24) (W 15 L 24) (W 16 L 24) (16 24) W 16 L 26 (W 15 L 26) W 15 L 28 (W 14 L 28) W 15 L 28 (W 14 L 28) W 15 L 30 (W 14 L 30) W 15 L 30 (W 14 L 30) New Max. in service Loaded static radius Section Rolling circumference li / ss ly rating load capacity (kg) at speed (km/h) Static cyclic TR /70 24 IN TI-05 TI TI-05 TI-06 TI-06 T-01 TI-09 T R R R R

41 xxxxxxxxxxxxxxx Skid steer diagonal tyres big boy, sk, TR Skid steer diagonal tyres for small machines with great performance SK-01 SK-02 SK-05 Big Boy TR / IN / /80 18 RF Reinforced construction SK-01 Standard tread with good traction properties and sidewall protection. SK-02 Heavy duty tread, robust reinforced tread lug in the central part, higher resistance to puncture and tread wear. Reinforced sidewall. suitable above all for bigger skid steer loaders and front axles of backhoe loaders or telescopic platforms. SK-05 Robust tyre for extreme conditions. Low void ratio and improved depth increases service life. Excellent self-cleaning properties. BI BOY Robust industrial with higher resistance to puncture and tread wear.

42 Skid steer diagonal tyres big boy, sk, TR big boy sk-01 sk-02 sk-05 tr-10 Skid steer technical data and load capacities Rim (permitted) Tube Flap New Max. in service Loaded static radius Section Rolling circumference SK SK R R / IN SK-02 SK-02 SK-01 TT/ HS 10/ SK-02 SK-02 SK-01 li / ss ly rating load capacity (kg) at speed (km/h) R R R R

43 Skid steer diagonal tyres big boy, sk, TR big boy sk-01 sk-02 sk-05 tr-10 Skid steer technical data and load capacities New Max. in service Loaded Rolling Rim Tube static circumference rating ly load capacity (kg) at speed (km/h) (permitted) Flap Section radius li / ss SK SK BI BOY SK R BI BOY SK R / /80 18 SK-02 SK-05 BI BOY TR-10 BI BOY BI BOY SK-02 BI BOY SK-05 BI BOY BI BOY TR-10 BI BOY BI BOY R R R B 14 R R R R

44 use & maintenance fitting instructions Use and Maintenance storage proper use of tyres > Keep the tyres clean and away from heat, light, ozone or hydrocarbon sources. > void prolonged exposure of the tyres to direct sunlight. > void any contact with grease, petrol, volatile solvents or other substances that may deteriorate the rubber. > void horizontal storage for tubeless tyres, only small size tyres may be stacked or stored flat (maximum 6 months). > When tyres are stored flat (horizontal), the position must be lug against lug. > Reduce inflation when tyres are stored fitted on rims. > Ensure there is no water or moisture inside the tyre. > Never store tyres directly in contact with the ground for long periods. > When loading tyres you have to consider the correlation between speed, inflation and load capacity. > Overloading results in premature tyre failure. Use the technical documentation and inflation tables which show the load and figures for different operating speeds. > Underinflation results not only in incorrect tread wear but also in ply separation and eventually further damage to the ply. > Overinflation makes the tyre stiff and decreases its resistance against hits, leading to ply tear. repairs to tyres > For safety reasons, repairs should only be carried out by specialists using the correct tools.

45 Earthmover tyres general information Earthmover tyres L series type tyres L series type tyres are used on all size loaders and dozers in off-road applications. Most loader type tyres, because of their extremely heavy construction, are limited to very low speeds and very short haul distances, 10 km/h and 250 m maximum. These illustrations show different lug to void ratios. Traction rock rock eep extra Rock eep L-2 esign l-3 esign L-4 esign L-5 esign Wheeled Loader Wheeled ozer Void Lug Loader : Closed working cycle Low speed up to 10 km/h Short distance up to 250 m ozer : ushes or grades material Low speed up to 10 km/h Travel distance varies MITS has also developed comparison ratings for L series type tyres. Note: The numbers are relative ratings with the L-3 tyre rated at 100. For example, the L-2 tyre has 20 % better traction than the L-3. Certain tyre construction features and applications can affect these ratings. The data below could vary from operation and / or from size to size of tyre. Load and Carry icks up and transports material : Low speed up to 25 km/h Short distance cycle length up to 600 m L series tyres are categorized by number code, type and tread depth. Number code depth L-2 Traction esign Regular epth L-3 Rock esign Regular epth L-4 Rock eep esign epth 150 % L-5 Extra Rock eep esign epth 250 % Below are examples of Mitas L Series tyres L series tyres Traction Rock resistance wear Lug to Void ratio L : 1 L : 2 L : 3 L : 4 E series type tyres The E series type tyres are referred to as haulage tyres in off-road earthmoving applications. These tyres transport material over uneven surfaces at speeds under 50 km/h and short distances, up to 4 km one way. The machine returns unloaded to the loading point. dump truck articulated dump truck scraper The letter designation and number code is found on the sidewalls of tyres. The L-2 traction design tyre gives maximum traction in sand and soft soil conditions. The L-3 rock design offers good traction and rock resistance in general purpose loader operations. The L-4 rock deep tread offers excellent tyre life. The L-5 extra Rock deep tread offer high resistance to cutting. Transport service: Transport of material Speed up to 50 km/h istance up to 4 km (length of working cycle)

46 Earthmover tyres general information E series tyres are categorized by number code, type and tread depth. Number code depth E-2 Traction esign Regular epth E-3 Rock esign Regular epth E-4 Rock eep esign epth 150 % Rear xle Load S Static Tipping Load Below are examples of Mitas E Series tyres E-4 Example calculation (for a loader with the following characteristics): equipment: R EM-30 Unladen weights: Front: kg (1) Rear: kg (2) Total: kg (3) L L Straight line tipping load: kg (4) Maximum axle load Front (static*) Maximum axle load Rear (3) + (4) = kg or kg per tyre (2) = kg or kg per tyre Base s as per table Variation in load capacity with speed Front = 300 ka (* increase for static load from 10 km /h is 60 %, / 1.6 = kg) Rear = 250 ka (calcuated with a margin of safety for speed 25 km/h) etermining Inflation ressures for Loaders 1 By weighing the machine axle etermine the maximum load on each tyre by weighing, this is the only way of setting tyre s accurately for optimum performance Use the table Variation in load capacity with speed for LOERS to determine the Front axle: for laden front axle (bucket full) Rear axle: for unladen rear axle (bucket empty) 2 By calculation, using the machine manufacturer s data When the machine is loading with the bucket penetrating into the material, the loader is often on the point of tipping. It is in this state that the front tyres are most heavily laden. etermine the maximum load / tyre on the front and rear axles FRONT axle The load on the front axle is equal to the total unladen weight of the machine + the tipping load (tipping load is shown in machine manufacturer s data). RER axle (bucket empty) Use either the unladen rear axle load given by the machine manufacturer, or Take 60 % of the unladen weight of the machine (to have a margin of safety) IMORTNT The rule to determine s by calculation applies to loaders of standard specifications, which have not been modified for special use. The calculated s are the minimum for the loads and may be increased to obtain a desired level of handling, or for particular applications, (but must remain within the published load / schedule for the tyre size and type). In the case of long travel distances (e. g. delivery of new machine, transfer from one site to another, etc.), specific precautions need to be taken: Vehicles in Transit Vehicles must be empty during transit Set inflation on cold tyres to the maximum value permitted by the table Variation in load capacity with speed for loaders Maximum vehicle speed 35 km/h Cooling stop 30 minutes after each 50 km transit Transit to a distance longer than 100 km is not recommended and the vehicle must be transported on a trailer The inflation will increase during roading of the vehicles. The must not be lowered when tyres are warm. etermining Inflation ressures for ozers: epending on the type of work, tyres on a dozer are subjected to different types of loading. The load on the Front xle is maximum when loading (pushing) a scraper The load on the Rear xle is maximum when dozing or whilst stockpiling From a practical viewpoint, the maximum load on either of the two axles is approximately equal to 2 / 3 of the machine weight. Using this method determine the load on each tyre Use the table Variation in load capacity with speed etermining Inflation ressures for Telescopic Handlers In the case of telescopic handlers the s recommended by the machine manufacturer should be used. These s are determined by the machine manufacturer after conducting a Tilt Test for stability. In the absence of the machine manufacturer s recommendation, use the corresponding to the maximum normalised load as shown in the table Variation in load capacity with speed for LOERS for both front and rear tyres.

47 tkph values Ton Kilometer er Hour (TKH) values dimension to 5 km 5 to 10 km 10 km and more Load capacity at 50 km/h (tons) TKH value 1. finding the tyre s TKH value The tyre s TKH value is determined by the following formula: 3. TKH-comparison The values for TKH tyre and TKH in operation should be compared to determine the most suitable tyre fitment for the operating conditions R 25 ERL R 25 ERL TKH tyre = 0.8 Q L V lloved Q L = Loading in tons at speed 50 km/h V alloved = llowed average speed in km/h is suitable if: TKH tyre TKH in operation R 25 ER is unsuitable if: 93 To determine the average speed of an TKH EM Radial tyre the value from table should tyre TKH in operation 20.5 R 25 ER be used. The calculation is based on outside temperature about 38 C and a round trip 23.5 R 25 ER distance of max. 5 kilometers (one way loaded 4. Limitation in operation and return empty) 23.5 R 25 ER If the cycle is longer than 5 kilometers (back and forth), the following formula 23.5 R 25 ER should be used: 2. finding of TKH value for the operation 26.5 R 25 ER R 25 ER /65 R 25 ER The TKH in operation shows the specific operational requirements and is calculated by the following formula: TKH in operation = (Q loaded + Q empty )/2 (n L)/h TKH = TKH tyre To find TMH (tonnes-mile per hour), the value TKH should be multipled by factor 0.685: TKH value is an indicator of the tyre s transport capacity and provides a means of achieving optimum performance from MITS Earthmover Radial tyres. s tyres have a limited resistance to heat, it is necessary to restrict the amount of hours worked to avoid over heating when the vehicle is operating under given conditions.the TKH value specifies the numbers of working hours that should be followed. In order to choose the optimum tyre for the job the TKH value for the tyre and TKH value for the operation should be compared. Q loaded = tyre loading when the vehicle is loaded Q empty = tyre loading when the vehicle is empty n = number of cycles per working day L = distance of cycle in kilometers (back and forth) h = number of working hours per day TMH = TKH

48 rim specification Rim specification SMLE OF RIM MRKIN W 18 l 38 W Meaning Rim contour 18 Nominal rim in inches W and W rims min W Hmin L Flange height code Rim Rim Rim x One-piece rim SC / Nominal rim in inches min min SC E / W W SC E / min SC F / W SC F / T 24 SC F / FURTHER SMLES OF MRKIN T 24 SC S / min p min. h min V 24 SC / W min W Wide drop centre single well shape rim W 14 L / W 15 L rop-centre Rims 5 rop-centre W Rims W Wide drop centre double well shape rim W 16 L SC Semi-drop centre rim W W 15 L Multi-piece rim W One-piece rim W H2 ouble Hump Nominal Rim C rop Centre rim Rim Rim 11.00/1.7 CR / / / / / / rop-centre Rims Flat Base Rims Rim R Hmin Flat Base RiM divided C Rim 4.33 R C C 5 Semi-rop Centre Rims Rim Tapered Rims C Rim Tapered Rims divided Rim 3 1/4 I S Hmin Hmin C C min min W W Hmin Hmin 5 Full Tapered Rims Rim C C Hmin Hmin

49 Legend & definitions Terms and shortcuts used in this catalogue cronyms Meaning efinition cronyms Meaning efinition R ly Rating Identifies different versions (load capacity/inflation ) of tyres having the same size designation. Static radius (theoretical nominal) The radius of the new tyre loaded at the maximum load capacity and with the corresponding tyre. Tubeless () s specifically designed for fitment without an inner Rolling circumference The circumference of the tyre loaded at the maximum load capacity 96 TYE Tubeless or Tube tube on appropriate rims. Tubeless tyres may be used with a tube. (theoretical nominal) and with the corresponding tyre. 97 LI Load Index Is a numerical code associated with the maximum load a tyre can carry at the speed indicated by its speed symbol under service conditions specified by the tyre manufacturer. LO CCITY load carrying capacity The maximum load (kg) a tyre is permitted to carry under specified operating conditions. In the case of twin-fitted driven wheels, a factor of 1.76 is applied to the load capacity of a single fitment tyre. SS Speed Symbol Indicates the maximum speed at which the tyre can carry a load corresponding to its load index under service conditions specified by the tyre manufacturer. Inflation The cold (ka) of the fluid with which the tyre is inflated. Free rolling wheels rive wheels Free rolling wheels, which do not transmit motion, e. g. trailer. rive wheels, which transmit motion, e. g. drive wheel axle on tractors. hlv High Load Variation Is where the tyre load varies by a factor of 2 or more between loaded and unloaded conditions. The inflation must be increased for HLV application, consult the tyre manufacturer for details. In the case of HLV, the maximum distance should not exceed 1 km and maximum speed 10 km/h. For a longer distance or higher speed, consult the tyre manufacturer. Example of purpose: without HLV normal use with constant load in transport service, on tractor in field service, e.g. trailer, tractor; with HLV use with various load conditions, factor > 2 between loaded and unloaded, e.g. loaders RIM Recommended rim The rim which gives the best fitment of the tyre for all conditions and types of service. llv Low Load Variation Standard application with low load difference between loaded and unloaded conditions. RIM (ERMITTE) ermitted rim ny rim which can be permitted in addition to the recommended rim. ETRTO The European and Rim Technical Organisation ata in this technical databook are consistent with ETRTO standards. New tyre dimensions The dimensions of an unloaded new tyre mounted on its measuring rim at the recommended inflation and allowed to stand for a minimum of 24 hours at normal room temperature before readjustment of the back to its original level. Nominal section The section of an inflated tyre mounted on its theoretical rim and indicated in the tyre size designation. Section (design) The linear distance between the outsides of the sidewalls of an inflated new tyre excluding elevations due to labelling (marking), decorations, or protective bands or ribs. IN gricultural tyres for traction wheels for construction applications with load capacities and inflation s which differ from those for tyres with the same size designation for use on agricultural tractors. (design) The of an inflated tyre at the outermost surface of the tread. REINFORCE s with better protection against tyre damage (puncture). The load capacity and tyre dimensions remain standard.

50 CS holding CS holding, our parent company MITS a. s. belongs to CS a. s., a holding company with the most comprehensive portfolio of rubber production in the Czech Republic. CS a. s. manufactures and globally distributes products for the automotive industry and other industries. CS holding subsidiaries, brands, products and services subsidiaries Brands roduct & services 98 gricultural tyres MT, Earthmoving and Fork lift tyres Motorcycle tyres Truck tyres ircraft tyres 99 Rubber compounds Rubber moulded parts ntivibrating systems Sealing elements Rubber roller coatings Silicon rubber products Rubber-textile fabric products V-belts Bicycle tyres and tubes Chemical vessel rubber coating Curing moulds and testing